Currently, bpf_trace_printk does not support common formatting
symbol '%i' however vsprintf does and is what eventually gets
called by bpf helper. If users are used to '%i' and currently
make use of it, then bpf_trace_printk will just return with
error without dumping anything to the trace pipe, so just add
support for '%i' to the helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This work tries to make the semantics and code around the
narrower ctx access a bit easier to follow. Right now
everything is done inside the .is_valid_access(). Offset
matching is done differently for read/write types, meaning
writes don't support narrower access and thus matching only
on offsetof(struct foo, bar) is enough whereas for read
case that supports narrower access we must check for
offsetof(struct foo, bar) + offsetof(struct foo, bar) +
sizeof(<bar>) - 1 for each of the cases. For read cases of
individual members that don't support narrower access (like
packet pointers or skb->cb[] case which has its own narrow
access logic), we check as usual only offsetof(struct foo,
bar) like in write case. Then, for the case where narrower
access is allowed, we also need to set the aux info for the
access. Meaning, ctx_field_size and converted_op_size have
to be set. First is the original field size e.g. sizeof(<bar>)
as in above example from the user facing ctx, and latter
one is the target size after actual rewrite happened, thus
for the kernel facing ctx. Also here we need the range match
and we need to keep track changing convert_ctx_access() and
converted_op_size from is_valid_access() as both are not at
the same location.
We can simplify the code a bit: check_ctx_access() becomes
simpler in that we only store ctx_field_size as a meta data
and later in convert_ctx_accesses() we fetch the target_size
right from the location where we do convert. Should the verifier
be misconfigured we do reject for BPF_WRITE cases or target_size
that are not provided. For the subsystems, we always work on
ranges in is_valid_access() and add small helpers for ranges
and narrow access, convert_ctx_accesses() sets target_size
for the relevant instruction.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.
This allows creating a probe such as:
p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0
Which is necessary for this command to work:
perf probe -m 8021q -a vlan_gro_receive
Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net
Cc: stable@vger.kernel.org
Fixes: 413d37d1e ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When doing the following command:
# echo ":mod:kvm_intel" > /sys/kernel/tracing/stack_trace_filter
it triggered a crash.
This happened with the clean up of probes. It required all callers to the
regex function (doing ftrace filtering) to have ops->private be a pointer to
a trace_array. But for the stack tracer, that is not the case.
Allow for the ops->private to be NULL, and change the function command
callbacks to handle the trace_array pointer being NULL as well.
Fixes: d2afd57a4b ("tracing/ftrace: Allow instances to have their own function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Init boot up functions may be traced, but they are also freed when the
kernel finishes booting. These are removed from the ftrace tables, and the
debug variable for dyn_ftrace_total_info needs to reflect that as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the new_hash fails to allocate, then unlock the hash mutex on error.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Earlier patches introduced ability to record the tgid using the 'record-tgid'
option. Here we read the tgid and output it if the option is enabled.
Link: http://lkml.kernel.org/r/20170626053844.5746-3-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Inorder to support recording of tgid, the following changes are made:
* Introduce a new API (tracing_record_taskinfo) to additionally record the tgid
along with the task's comm at the same time. This has has the benefit of not
setting trace_cmdline_save before all the information for a task is saved.
* Add a new API tracing_record_taskinfo_sched_switch to record task information
for 2 tasks at a time (previous and next) and use it from sched_switch probe.
* Preserve the old API (tracing_record_cmdline) and create it as a wrapper
around the new one so that existing callers aren't affected.
* Reuse the existing sched_switch and sched_wakeup probes to record tgid
information and add a new option 'record-tgid' to enable recording of tgid
When record-tgid option isn't enabled to being with, we take care to make sure
that there's isn't memory or runtime overhead.
Link: http://lkml.kernel.org/r/20170627020155.5139-1-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The dyn_ftrace_total_info file is used to show how many functions have been
converted into nops and can be used by ftrace. The problem is that it does
not get decremented when functions are removed (init boot code being freed,
and modules being freed). That means the number is very inaccurate everytime
functions are removed from the ftrace tables. Decrement it when functions
are removed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace_arch_read_dyn_info() was used so that archs could add its own debug
information into the dyn_ftrace_total_info in the tracefs file system. That
file is for debugging usage of dynamic ftrace. No arch uses that function
anymore, so just get rid of it.
This also allows for tracing_read_dyn_info() to be cleaned up a bit.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When a module filter is added to set_ftrace_filter, if the module is not
loaded, it is cached. This should be considered an active filter, and
function tracing should be filtered by this. That is, if a cached module
filter is the only filter set, then no function tracing should be happening,
as all the functions available will be filtered out.
This makes sense, as the reason to add a cached module filter, is to trace
the module when you load it. There shouldn't be any other tracing happening
until then.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a module is cached in the set_ftrace_filter, and that module is loaded,
then enable tracing on that module as if the cached module text was written
into set_ftrace_filter just as the module is loaded.
# echo ":mod:kvm_intel" >
# cat /sys/kernel/tracing/set_ftrace_filter
#### all functions enabled ####
:mod:kvm_intel
# modprobe kvm_intel
# cat /sys/kernel/tracing/set_ftrace_filter
vmx_get_rflags [kvm_intel]
vmx_get_pkru [kvm_intel]
vmx_get_interrupt_shadow [kvm_intel]
vmx_rdtscp_supported [kvm_intel]
vmx_invpcid_supported [kvm_intel]
[..]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When writing in a module filter into set_ftrace_filter for a module that is
not yet loaded, it it cached, and will be executed when the module is loaded
(although that is not implemented yet at this commit). Display the list of
cached modules to be traced.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This is the start of the infrastructure work to allow for tracing module
functions before it is loaded.
Currently the following command:
# echo :mod:some-mod > set_ftrace_filter
will enable tracing of all functions within the module "some-mod" if it is
loaded. What we want, is if the module is not loaded, that line will be
saved. When the module is loaded, then the "some-mod" will have that line
executed on it, so that the functions within it starts being traced.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 31fd85816d ("bpf: permits narrower load from bpf program
context fields") permits narrower load for certain ctx fields.
The commit however will already generate a masking even if
the prog-specific ctx conversion produces the result with
narrower size.
For example, for __sk_buff->protocol, the ctx conversion
loads the data into register with 2-byte load.
A narrower 2-byte load should not generate masking.
For __sk_buff->vlan_present, the conversion function
set the result as either 0 or 1, essentially a byte.
The narrower 2-byte or 1-byte load should not generate masking.
To avoid unnecessary masking, prog-specific *_is_valid_access
now passes converted_op_size back to verifier, which indicates
the valid data width after perceived future conversion.
Based on this information, verifier is able to avoid
unnecessary marking.
Since we want more information back from prog-specific
*_is_valid_access checking, all of them are packed into
one data structure for more clarity.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, verifier will reject a program if it contains an
narrower load from the bpf context structure. For example,
__u8 h = __sk_buff->hash, or
__u16 p = __sk_buff->protocol
__u32 sample_period = bpf_perf_event_data->sample_period
which are narrower loads of 4-byte or 8-byte field.
This patch solves the issue by:
. Introduce a new parameter ctx_field_size to carry the
field size of narrower load from prog type
specific *__is_valid_access validator back to verifier.
. The non-zero ctx_field_size for a memory access indicates
(1). underlying prog type specific convert_ctx_accesses
supporting non-whole-field access
(2). the current insn is a narrower or whole field access.
. In verifier, for such loads where load memory size is
less than ctx_field_size, verifier transforms it
to a full field load followed by proper masking.
. Currently, __sk_buff and bpf_perf_event_data->sample_period
are supporting narrowing loads.
. Narrower stores are still not allowed as typical ctx stores
are just normal stores.
Because of this change, some tests in verifier will fail and
these tests are removed. As a bonus, rename some out of bound
__sk_buff->cb access to proper field name and remove two
redundant "skb cb oob" tests.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The enum_map file is used to display a list of symbol
to name conversions. As its now used to resolve sizeof
lets update the name and description.
Link: http://lkml.kernel.org/r/20170531215653.3240-13-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The enum_replace stanza works as is for sizeof()
calls as well as enums. Rename it as well.
Link: http://lkml.kernel.org/r/20170531215653.3240-9-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rename the core trace enum routines to use eval, to
reflect their use by more than just enum to value mapping.
Link: http://lkml.kernel.org/r/20170531215653.3240-8-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rename the init and trace_enum_jmp_to_tail() routines
to reflect their use by more than enumerated types.
Link: http://lkml.kernel.org/r/20170531215653.3240-7-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There is a lock protecting the trace_enum_map, rename
it to reflect the use by more than enums.
Link: http://lkml.kernel.org/r/20170531215653.3240-6-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The enum map entries can be exported to userspace
via a sys enum_map file. Rename those functions
and structures to reflect the fact that we are using
them for more than enums.
Link: http://lkml.kernel.org/r/20170531215653.3240-5-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Each module has a list of enum's its contributing to the
enum map, rename that entry to reflect its use by more than
enums.
Link: http://lkml.kernel.org/r/20170531215653.3240-4-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Each enum is loaded into the trace_enum_map, as we
are now using this for more than enums rename it.
Link: http://lkml.kernel.org/r/20170531215653.3240-3-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The kernel and its modules have sections containing the enum
string to value conversions. Rename this section because we
intend to store more than enums in it.
Link: http://lkml.kernel.org/r/20170531215653.3240-2-jeremy.linton@arm.com
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into for-4.13/block
We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.
Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
perf_sample_data consumes 386 bytes on stack, reduce excessive stack
usage and move it to per cpu buffer. It's allowed due to preemption
being disabled for tracing, xdp and tc programs, thus at all times
only one program can run on a specific CPU and programs cannot run
from interrupt. We similarly also handle bpf_pt_regs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Check the kretprobe maxactive is supported by kprobe_events
interface. To ensure the kernel feature, this changes ftrace
README to describe it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Allow BPF_PROG_TYPE_PERF_EVENT program types to attach to all
perf_event types, including HW_CACHE, RAW, and dynamic pmu events.
Only tracepoint/kprobe events are treated differently which require
BPF_PROG_TYPE_TRACEPOINT/BPF_PROG_TYPE_KPROBE program types accordingly.
Also add support for reading all event counters using
bpf_perf_event_read() helper.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
when deleting an instance. It also creates a selftest that triggers that bug.
Fix the delayed optimization happening after kprobes boot up self tests
being removed by freeing of init memory.
Comment kprobes on why the delay optimization is not a problem for removal
of modules, to keep other developers from searching that riddle.
Fix another rcu isn't watching in stack trace tracing.
Naveen N. Rao (4):
ftrace: Simplify glob handling in unregister_ftrace_function_probe_func()
ftrace/instances: Clear function triggers when removing instances
selftests/ftrace: Fix bashisms
selftests/ftrace: Add test to remove instance with active event triggers
Steven Rostedt (1):
tracing: Move postpone selftests to core from early_initcall
Steven Rostedt (VMware) (3):
ftrace: Remove #ifdef from code and add clear_ftrace_function_probes() stub
kprobes: Document how optimized kprobes are removed from module unload
tracing: Make sure RCU is watching before calling a stack trace
Thomas Gleixner (1):
tracing/kprobes: Enforce kprobes teardown after testing
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZIQapFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
A6MIAKFLb6mQ4flRBXpWd2tD2B4DQpQ0H7SovseZnlH6Q7grU6POY/qbNl9xXiBA
3NavxqbIYokH8cxEqGAusL7ASUFPXJj6erMM1uc1WRuAzMpIjvgNacOtW5R+c5S9
ofR1xtKlBo/854J/IP6M3J0WqrK+B7TsS1WYKohe/tFMBpolbnFloHVfMMZlaL58
CQhCoAhkjJRsta6dJhbo+HoQy03VGyWsfFHtutBpIwsf81Naq4Stpxp7jdZLWhB8
Di5QdOji9lDayK6Uk7DDZqHxbjC9z6cCS9nVWIGHkE4AMpR3peYtsyCaAOBjVMLV
2OuhuREfZgKaYVMjUfdeYCayDAY=
=1gek
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a bug caused by not cleaning up the new instance unique triggers
when deleting an instance. It also creates a selftest that triggers
that bug.
- Fix the delayed optimization happening after kprobes boot up self
tests being removed by freeing of init memory.
- Comment kprobes on why the delay optimization is not a problem for
removal of modules, to keep other developers from searching that
riddle.
- Fix another case of rcu not watching in stack trace tracing.
* tag 'trace-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make sure RCU is watching before calling a stack trace
kprobes: Document how optimized kprobes are removed from module unload
selftests/ftrace: Add test to remove instance with active event triggers
selftests/ftrace: Fix bashisms
ftrace: Remove #ifdef from code and add clear_ftrace_function_probes() stub
ftrace/instances: Clear function triggers when removing instances
ftrace: Simplify glob handling in unregister_ftrace_function_probe_func()
tracing/kprobes: Enforce kprobes teardown after testing
tracing: Move postpone selftests to core from early_initcall
Pull block fixes from Jens Axboe:
"A small collection of fixes that should go into this cycle.
- a pull request from Christoph for NVMe, which ended up being
manually applied to avoid pulling in newer bits in master. Mostly
fibre channel fixes from James, but also a few fixes from Jon and
Vijay
- a pull request from Konrad, with just a single fix for xen-blkback
from Gustavo.
- a fuseblk bdi fix from Jan, fixing a regression in this series with
the dynamic backing devices.
- a blktrace fix from Shaohua, replacing sscanf() with kstrtoull().
- a request leak fix for drbd from Lars, fixing a regression in the
last series with the kref changes. This will go to stable as well"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvmet: release the sq ref on rdma read errors
nvmet-fc: remove target cpu scheduling flag
nvme-fc: stop queues on error detection
nvme-fc: require target or discovery role for fc-nvme targets
nvme-fc: correct port role bits
nvme: unmap CMB and remove sysfs file in reset path
blktrace: fix integer parse
fuseblk: Fix warning in super_setup_bdi_name()
block: xen-blkback: add null check to avoid null pointer dereference
drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub()
sscanf is a very poor way to parse integer. For example, I input
"discard" for act_mask, it gets 0xd and completely messes up. Using
correct API to do integer parse.
This patch also makes attributes accept any base of integer.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
As stack tracing now requires "rcu watching", force RCU to be watching when
recording a stack trace.
Link: http://lkml.kernel.org/r/20170512172449.879684501@goodmis.org
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.
The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.
Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.
Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
pointer to using cpumask_available(), which will do the check. This is
because cpumasks when not allocated are always set, and clang complains
about it.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZEcUIFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
zygH/051hNj3aZlSZCD1pXwPkHgeVBn7lSB9k6hcJ5J/OknL/hNXws3Dv4Lb7Dzj
cZhg62LTwwS6PVCJtOHk+PE/c5FIdY9o1mXJpAst6wbl9Sp1lzPJbFum45UadvWn
UyU3RP0ncSgfojyrwIu6XyND7/NatdYk9irTMWL9+cDuy9xGvJgRX1sf7tXmxj4C
AbZzQorDw7XDczDbvFM1XyPU3ApGUDqQ7VhCEBP6ivE+5Ceoo9xi/z7yfKyjLeb+
H7+/eA8ztaMLgTzLWwkFKdP/knqwPmAb+MHTR0DoLHcVe7fbbxFS7x+cfR8mfIA9
8tA5SUxc7bymRvDAcN2dMrtL7f8=
=3hKI
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This is a trivial patch that changes a check for a cpumask from a NULL
pointer to using cpumask_available(), which will do the check. This is
because cpumasks when not allocated are always set, and clang
complains about it"
* tag 'trace-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Use cpumask_available() to check if cpumask variable may be used
The first one is just a switch from using strcpy() to strlcpy(). Someone
thought that it may cause an overflow bug, but since it only copies comms
into a pre-allocated array of TASK_COMM_LEN, and no comm should ever
be bigger than that, nor not end with a nul character, this change is more
of a safety precaution than fixing anything that is actually broken.
The other two changes are simply cleaning and optimizing some code.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZEKYJFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
+NcH/jK6ELGykogqi2FfLNzwJTjVpHdKrrMKyxHcC+jXv3mJUyK+0qKHkCO6zyy1
EWAbTrSMjHGG6r6AP42QLRRehsijk7xXjJm86T771PNtSgY4xCKobFisk73KR4YB
2Y1JXkSpKH2kKgdixR9hcg4h5RTv16KeAMu2cLSMxRfDEr1mBvv7LU8ZrobJSx2C
LGR/241bTxOB6mWCmjqSTVrhHyEAMgJhVwV+ym7qfjqQULGhgFmq3CVTicFU0PWx
UkzrcwYT2T56jU3Ngu/e1KkEZq0/rG7O86iSxgwnuraW4n48u3rpkl/q9eZ029Hd
/kxyyXBKQDxx6cQd4hZrYUTW4IU=
=8/K8
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"These are three simple changes.
The first one is just a switch from using strcpy() to strlcpy().
Someone thought that it may cause an overflow bug, but since it only
copies comms into a pre-allocated array of TASK_COMM_LEN, and no comm
should ever be bigger than that, nor not end with a nul character,
this change is more of a safety precaution than fixing anything that
is actually broken.
The other two changes are simply cleaning and optimizing some code"
* tag 'trace-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Simplify ftrace_match_record() even more
ftrace: Remove an unneeded condition
tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()
This fixes the following clang warning:
kernel/trace/trace.c:3231:12: warning: address of array 'iter->started'
will always evaluate to 'true' [-Wpointer-bool-conversion]
if (iter->started)
Link: http://lkml.kernel.org/r/20170421234110.117075-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
struct timespec is not y2038 safe on 32 bit machines and needs to be
replaced by struct timespec64 in order to represent times beyond year
2038 on such machines.
Fix all the timestamp representation in struct trace_hwlat and all the
corresponding implementations.
Link: http://lkml.kernel.org/r/1491613030-11599-3-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter sent a patch to remove a check in ftrace_match_record()
because the logic of the code made the check redundant. I looked deeper into
the code, and made the following logic table, with the three variables and
the result of the original code.
modname mod_matches exclude_mod result
------- ----------- ----------- ------
0 0 0 return 0
0 0 1 func_match
0 1 * < cannot exist >
1 0 0 return 0
1 0 1 func_match
1 1 0 func_match
1 1 1 return 0
Notice that when mod_matches == exclude mod, the result is always to
return 0, and when mod_matches != exclude_mod, then the result is to test
the function. This means we only need test if mod_matches is equal to
exclude_mod.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We know that "mod_matches" is true here so there is no need to check
again.
Link: http://lkml.kernel.org/r/20170331152130.GA4947@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Strcpy is inherently not safe, and strlcpy() should be used instead.
__trace_find_cmdline() uses strcpy() because the comms saved must have a
terminating nul character, but it doesn't hurt to add the extra protection
of using strlcpy() instead of strcpy().
Link: http://lkml.kernel.org/r/1493806274-13936-1-git-send-email-amit.pundir@linaro.org
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
[AmitP: Cherry-picked this commit from CodeAurora kernel/msm-3.10
https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=2161ae9a70b12cf18ac8e5952a20161ffbccb477]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
[ Updated change log and removed the "- 1" from len parameter ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
o Pretty much a full rewrite of the processing of function plugins.
i.e. echo do_IRQ:stacktrace > set_ftrace_filter
o The rewrite was needed to add plugins to be unique to tracing instances.
i.e. mkdir instance/foo; cd instances/foo; echo do_IRQ:stacktrace > set_ftrace_filter
The old way was written very hacky. This removes a lot of those hacks.
o New "function-fork" tracing option. When set, pids in the set_ftrace_pid
will have their children added when the processes with their pids
listed in the set_ftrace_pid file forks.
o Exposure of "maxactive" for kretprobe in kprobe_events
o Allow for builtin init functions to be traced by the function tracer
(via the kernel command line). Module init function tracing will come
in the next release.
o Added more selftests, and have selftests also test in an instance.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZCRchFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
zuIH/RsLUb8Hj6GmhAvn/tblUDzWyqlXX2h79VVlo/XrWayHYNHnKOmua1WwMZC6
xESXb/AffAc89VWTkKsrwaK7yfRPG6+w8zTZOcFuXSBpqSGG/oey9Fxj5Wqqpche
oJ2UY7ngxANAipkP5GxdYTafFSoWhGZGfUUtW+5tAHoFHzqO2lOjO8olbXP69sON
kVX/b461S20cVvRe5H/F0klXLSc37Tlp5YznXy4H4V4HcJSN1Fb6/uozOXALZ4se
SBpVMWmVVoGJorzj+ic7gVOeohvC8RnR400HbeMVwaI0Lj50noidDj/5Hv8F7T+D
h1B8vATNZLFAFUOSHINCBIu6Vj0=
=t8mg
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features for this release:
- Pretty much a full rewrite of the processing of function plugins.
i.e. echo do_IRQ:stacktrace > set_ftrace_filter
- The rewrite was needed to add plugins to be unique to tracing
instances. i.e. mkdir instance/foo; cd instances/foo; echo
do_IRQ:stacktrace > set_ftrace_filter The old way was written very
hacky. This removes a lot of those hacks.
- New "function-fork" tracing option. When set, pids in the
set_ftrace_pid will have their children added when the processes
with their pids listed in the set_ftrace_pid file forks.
- Exposure of "maxactive" for kretprobe in kprobe_events
- Allow for builtin init functions to be traced by the function
tracer (via the kernel command line). Module init function tracing
will come in the next release.
- Added more selftests, and have selftests also test in an instance"
* tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits)
ring-buffer: Return reader page back into existing ring buffer
selftests: ftrace: Allow some event trigger tests to run in an instance
selftests: ftrace: Have some basic tests run in a tracing instance too
selftests: ftrace: Have event tests also run in an tracing instance
selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances
selftests: ftrace: Allow some tests to be run in a tracing instance
tracing/ftrace: Allow for instances to trigger their own stacktrace probes
tracing/ftrace: Allow for the traceonoff probe be unique to instances
tracing/ftrace: Enable snapshot function trigger to work with instances
tracing/ftrace: Allow instances to have their own function probes
tracing/ftrace: Add a better way to pass data via the probe functions
ftrace: Dynamically create the probe ftrace_ops for the trace_array
tracing: Pass the trace_array into ftrace_probe_ops functions
tracing: Have the trace_array hold the list of registered func probes
ftrace: If the hash for a probe fails to update then free what was initialized
ftrace: Have the function probes call their own function
ftrace: Have each function probe use its own ftrace_ops
ftrace: Have unregister_ftrace_function_probe_func() return a value
ftrace: Add helper function ftrace_hash_move_and_update_ops()
ftrace: Remove data field from ftrace_func_probe structure
...
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
Pull splice updates from Al Viro:
"These actually missed the last cycle; the branch itself is from last
December"
* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make nr_pages calculation in default_file_splice_read() a bit less ugly
splice/tee/vmsplice: validate flags
splice_pipe_desc: kill ->flags
remove spd_release_page()
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- Kprobes and uprobes changes:
- Make their trampolines read-only while they are used
- Make UPROBES_EVENTS default-y which is the distro practice
- Apply misc fixes and robustization to probe point insertion.
- add support for AMD IOMMU events
- extend hw events on Intel Goldmont CPUs
- ... plus misc fixes and updates.
Tooling side changes:
- support s390 jump instructions in perf annotate (Christian
Borntraeger)
- vendor hardware events updates (Andi Kleen)
- add argument support for SDT events in powerpc (Ravi Bangoria)
- beautify the statx syscall arguments in 'perf trace' (Arnaldo
Carvalho de Melo)
- handle inline functions in callchains (Jin Yao)
- enable sorting by srcline as key (Milian Wolff)
- add 'brstackinsn' field in 'perf script' to reuse the x86
instruction decoder used in the Intel PT code to study hot paths to
samples (Andi Kleen)
- add PERF_RECORD_NAMESPACES so that the kernel can record
information required to associate samples to namespaces, helping in
container problem characterization. (Hari Bathini)
- allow sorting by symbol_size in 'perf report' and 'perf top'
(Charles Baylis)
- in perf stat, make system wide (-a) the default option if no target
was specified and one of following conditions is met:
- no workload specified (current behaviour)
- a workload is specified but all requested events are system wide
ones, like uncore ones. (Jiri Olsa)
- ... plus lots of other updates, enhancements, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (235 commits)
perf tools: Fix the code to strip command name
tools arch x86: Sync cpufeatures.h
tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel
tools: Update asm-generic/mman-common.h copy from the kernel
perf tools: Use just forward declarations for struct thread where possible
perf tools: Add the right header to obtain PERF_ALIGN()
perf tools: Remove poll.h and wait.h from util.h
perf tools: Remove string.h, unistd.h and sys/stat.h from util.h
perf tools: Remove stale prototypes from builtin.h
perf tools: Remove string.h from util.h
perf tools: Remove sys/ioctl.h from util.h
perf tools: Remove a few more needless includes from util.h
perf tools: Include sys/param.h where needed
perf callchain: Move callchain specific routines from util.[ch]
perf tools: Add compress.h for the *_decompress_to_file() headers
perf mem: Fix display of data source snoop indication
perf debug: Move dump_stack() and sighandler_dump_stack() to debug.h
perf kvm: Make function only used by 'perf kvm' static
perf tools: Move timestamp routines from util.h to time-utils.h
perf tools: Move units conversion/formatting routines to separate object
...
Pull uaccess unification updates from Al Viro:
"This is the uaccess unification pile. It's _not_ the end of uaccess
work, but the next batch of that will go into the next cycle. This one
mostly takes copy_from_user() and friends out of arch/* and gets the
zero-padding behaviour in sync for all architectures.
Dealing with the nocache/writethrough mess is for the next cycle;
fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
sold on access_ok() in there, BTW; just not in this pile), same for
reducing __copy_... callsites, strn*... stuff, etc. - there will be a
pile about as large as this one in the next merge window.
This one sat in -next for weeks. -3KLoC"
* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
HAVE_ARCH_HARDENED_USERCOPY is unconditional now
CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
m32r: switch to RAW_COPY_USER
hexagon: switch to RAW_COPY_USER
microblaze: switch to RAW_COPY_USER
get rid of padding, switch to RAW_COPY_USER
ia64: get rid of copy_in_user()
ia64: sanitize __access_ok()
ia64: get rid of 'segment' argument of __do_{get,put}_user()
ia64: get rid of 'segment' argument of __{get,put}_user_check()
ia64: add extable.h
powerpc: get rid of zeroing, switch to RAW_COPY_USER
esas2r: don't open-code memdup_user()
alpha: fix stack smashing in old_adjtimex(2)
don't open-code kernel_setsockopt()
mips: switch to RAW_COPY_USER
mips: get rid of tail-zeroing in primitives
mips: make copy_from_user() zero tail explicitly
mips: clean and reorder the forest of macros...
mips: consolidate __invoke_... wrappers
...
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
When reading the ring buffer for consuming, it is optimized for splice,
where a page is taken out of the ring buffer (zero copy) and sent to the
reading consumer. When the read is finished with the page, it calls
ring_buffer_free_read_page(), which simply frees the page. The next time the
reader needs to get a page from the ring buffer, it must call
ring_buffer_alloc_read_page() which allocates and initializes a reader page
for the ring buffer to be swapped into the ring buffer for a new filled page
for the reader.
The problem is that there's no reason to actually free the page when it is
passed back to the ring buffer. It can hold it off and reuse it for the next
iteration. This completely removes the interaction with the page_alloc
mechanism.
Using the trace-cmd utility to record all events (causing trace-cmd to
require reading lots of pages from the ring buffer, and calling
ring_buffer_alloc/free_read_page() several times), and also assigning a
stack trace trigger to the mm_page_alloc event, we can see how many times
the ring_buffer_alloc_read_page() needed to allocate a page for the ring
buffer.
Before this change:
# trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
# trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
9968
After this change:
# trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
# trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
4
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Both conflict were simple overlapping changes.
In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the
conversion of the driver in net-next to use in-netdev stats.
Signed-off-by: David S. Miller <davem@davemloft.net>
Have the traceon/off function probe triggers affect only the instance they
are set in. This required making the trace_on/off accessible for other files
in the tracing directory.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Modify the snapshot probe trigger to work with instances. This way the
snapshot function trigger will only affect the instance that it is added to
in the set_ftrace_filter file.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pass around the local trace_array that is the descriptor for tracing
instances, when enabling and disabling probes. This by default sets the
enable/disable of event probe triggers to work with instances.
The other probes will need some more work to get them working with
instances.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With the redesign of the registration and execution of the function probes
(triggers), data can now be passed from the setup of the probe to the probe
callers that are specific to the trace_array it is on. Although, all probes
still only affect the toplevel trace array, this change will allow for
instances to have their own probes separated from other instances and the
top array.
That is, something like the stacktrace probe can be set to trace only in an
instance and not the toplevel trace array. This isn't implement yet, but
this change sets the ground work for the change.
When a probe callback is triggered (someone writes the probe format into
set_ftrace_filter), it calls register_ftrace_function_probe() passing in
init_data that will be used to initialize the probe. Then for every matching
function, register_ftrace_function_probe() will call the probe_ops->init()
function with the init data that was passed to it, as well as an address to
a place holder that is associated with the probe and the instance. The first
occurrence will have a NULL in the pointer. The init() function will then
initialize it. If other probes are added, or more functions are part of the
probe, the place holder will be passed to the init() function with the place
holder data that it was initialized to the last time.
Then this place_holder is passed to each of the other probe_ops functions,
where it can be used in the function callback. When the probe_ops free()
function is called, it can be called either with the rip of the function
that is being removed from the probe, or zero, indicating that there are no
more functions attached to the probe, and the place holder is about to be
freed. This gives the probe_ops a way to free the data it assigned to the
place holder if it was allocade during the first init call.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to eventually have each trace_array instance have its own unique
set of function probes (triggers), the trace array needs to hold the ops and
the filters for the probes.
This is the first step to accomplish this. Instead of having the private
data of the probe ops point to the trace_array, create a separate list that
the trace_array holds. There's only one private_data for a probe, we need
one per trace_array. The probe ftrace_ops will be dynamically created for
each instance, instead of being static.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pass the trace_array associated to a ftrace_probe_ops into the probe_ops
func(), init() and free() functions. The trace_array is the descriptor that
describes a tracing instance. This will help create the infrastructure that
will allow having function probes unique to tracing instances.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a link list to the trace_array to hold func probes that are registered.
Currently, all function probes are the same for all instances as it was
before, that is, only the top level trace_array holds the function probes.
But this lays the ground work to have function probes be attached to
individual instances, and having the event trigger only affect events in the
given instance. But that work is still to be done.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the ftrace_hash_move_and_update_ops() fails, and an ops->free() function
exists, then it needs to be called on all the ops that were added by this
registration.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that the function probes have their own ftrace_ops, there's no reason to
continue using the ftrace_func_hash to find which probe to call in the
function callback. The ops that is passed in to the function callback is
part of the probe_ops to call.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have the function probes have their own ftrace_ops, and remove the
trace_probe_ops. This simplifies some of the ftrace infrastructure code.
Individual entries for each function is still allocated for the use of the
output for set_ftrace_filter, but they will be removed soon too.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently unregister_ftrace_function_probe_func() is a void function. It
does not give any feedback if an error occurred or no item was found to
remove and nothing was done.
Change it to return status and success if it removed something. Also update
the callers to return that feedback to the user.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The processes of updating a ops filter_hash is a bit complex, and requires
setting up an old hash to perform the update. This is done exactly the same
in two locations for the same reasons. Create a helper function that does it
in one place.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
No users of the function probes uses the data field anymore. Remove it, and
change the init function to take a void *data parameter instead of a
void **data, because the init will just get the data that the registering
function was received, and there's no state after it is called.
The other functions for ftrace_probe_ops still take the data parameter, but
it will currently only be passed NULL. It will stay as a parameter for
future data to be passed to these functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
None of the probe users uses the data field anymore of the entry. They all
have their own print() function. Remove showing the data field in the
generic function as the data field will be going away.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There are no users of unregister_ftrace_function_probe_all(). The only probe
function that is used is unregister_ftrace_function_probe_func(). Rename the
internal static function __unregister_ftrace_function_probe() to
unregister_ftrace_function_probe_func() and make it global.
Also remove the PROBE_TEST_FUNC as it would be always set.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Nothing calls unregister_ftrace_function_probe(). Remove it as well as the
flag PROBE_TEST_DATA, as this function was the only one to set it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As the data pointer for individual ips will soon be removed and no longer
passed to the callback function probe handlers, convert the rest of the function
trigger counters over to the new ftrace_func_mapper helper functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As the data pointer for individual ips will soon be removed and no longer
passed to the callback function probe handlers, convert the snapshot
trigger counter over to the new ftrace_func_mapper helper functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to move the ops to the function probes directly, they need a way to
map function ips to their own data without depending on the infrastructure
of the function probes, as the data field will be going away.
New helper functions are added that are based on the ftrace_hash code.
ftrace_func_mapper functions are there to let the probes map ips to their
data. These can be allocated by the probe ops, and referenced in the
function callbacks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In preparation to cleaning up the probe function registration code, the
"data" parameter will eventually be removed from the probe->func() call.
Instead it will receive its own "ops" function, in which it can set up its
own data that it needs to map.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As nothing outside the tracing directory uses the function command mechanism,
I'm moving the prototypes out of the include/linux/ftrace.h and into the
local kernel/trace/trace.h header. I plan on making them hook to the
trace_array structure which is local to kernel/trace, and I do not want to
expose it to the rest of the kernel. This requires that the command functions
must also be local to tracing. But luckily nothing else uses them.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A function in kernel/bpf/syscall.c which got a bug fix in 'net'
was moved to kernel/bpf/verifier.c in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:
># cat snapshot
# tracer: nop
#
#
# * Snapshot is allocated *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
But instead it just showed an empty buffer:
># cat snapshot
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.
Cc: stable@vger.kernel.org
Fixes: 651e22f270 ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently the snapshot trigger enables the probe and then allocates the
snapshot. If the probe triggers before the allocation, it could cause the
snapshot to fail and turn tracing off. It's best to allocate the snapshot
buffer first, and then enable the trigger. If something goes wrong in the
enabling of the trigger, the snapshot buffer is still allocated, but it can
also be freed by the user by writting zero into the snapshot buffer file.
Also add a check of the return status of alloc_snapshot().
Cc: stable@vger.kernel.org
Fixes: 77fd5c15e3 ("tracing: Add snapshot trigger to function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As nothing outside the tracing directory uses the function probes mechanism,
I'm moving the prototypes out of the include/linux/ftrace.h and into the
local kernel/trace/trace.h header. I plan on making them hook to the
trace_array structure which is local to kernel/trace, and I do not want to
expose it to the rest of the kernel. This requires that the probe functions
must also be local to tracing. But luckily nothing else uses them.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function-fork option is same as event-fork that it tracks task
fork/exit and set the pid filter properly. This can be useful if user
wants to trace selected tasks including their children only.
Link: http://lkml.kernel.org/r/20170417024430.21194-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When function tracer has a pid filter, it adds a probe to sched_switch
to track if current task can be ignored. The probe checks the
ftrace_ignore_pid from current tr to filter tasks. But it misses to
delete the probe when removing an instance so that it can cause a crash
due to the invalid tr pointer (use-after-free).
This is easily reproducible with the following:
# cd /sys/kernel/debug/tracing
# mkdir instances/buggy
# echo $$ > instances/buggy/set_ftrace_pid
# rmdir instances/buggy
============================================================================
BUG: KASAN: use-after-free in ftrace_filter_pid_sched_switch_probe+0x3d/0x90
Read of size 8 by task kworker/0:1/17
CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G B 4.11.0-rc3 #198
Call Trace:
dump_stack+0x68/0x9f
kasan_object_err+0x21/0x70
kasan_report.part.1+0x22b/0x500
? ftrace_filter_pid_sched_switch_probe+0x3d/0x90
kasan_report+0x25/0x30
__asan_load8+0x5e/0x70
ftrace_filter_pid_sched_switch_probe+0x3d/0x90
? fpid_start+0x130/0x130
__schedule+0x571/0xce0
...
To fix it, use ftrace_clear_pids() to unregister the probe. As
instance_rmdir() already updated ftrace codes, it can just free the
filter safely.
Link: http://lkml.kernel.org/r/20170417024430.21194-2-namhyung@kernel.org
Fixes: 0c8916c342 ("tracing: Add rmdir to remove multibuffer instances")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trace_event benchmark thread runs in kernel space in an infinite loop
while also calling cond_resched() in case anything else wants to schedule
in. Unfortunately, on a PREEMPT kernel, that makes it a nop, in which case,
this will never voluntarily schedule. That will cause synchronize_rcu_tasks()
to forever block on this thread, while it is running.
This is exactly what cond_resched_rcu_qs() is for. Use that instead.
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
t_hash_start() does not increment *pos, where as t_next() must. But when
t_next() does increment *pos, it must still pass in the original *pos to
t_hash_start() otherwise it will skip the first instance:
# cd /sys/kernel/debug/tracing
# echo schedule:traceoff > set_ftrace_filter
# echo do_IRQ:traceoff > set_ftrace_filter
# echo call_rcu > set_ftrace_filter
# cat set_ftrace_filter
call_rcu
schedule:traceoff:unlimited
do_IRQ:traceoff:unlimited
The above called t_hash_start() from t_start() as there was only one
function (call_rcu), but if we add another function:
# echo xfrm_policy_destroy_rcu >> set_ftrace_filter
# cat set_ftrace_filter
call_rcu
xfrm_policy_destroy_rcu
do_IRQ:traceoff:unlimited
The "schedule:traceoff" disappears.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Conflicts were simply overlapping changes. In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.
In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need to have struct bpf_prog_type_list since
it just contains a list_head, the type, and the ops
pointer. Since the types are densely packed and not
actually dynamically registered, it's much easier and
smaller to have an array of type->ops pointer. Also
initialize this array statically to remove code needed
to initialize it.
In order to save duplicating the list, move it to a new
header file and include it in the places needing it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tracing uses rcu_irq_enter() as a way to make sure that RCU is watching when
it needs to use rcu_read_lock() and friends. This is because tracing can
happen as RCU is about to enter user space, or about to go idle, and RCU
does not watch for RCU read side critical sections as it makes the
transition.
There is a small location within the RCU infrastructure that rcu_irq_enter()
itself will not work. If tracing were to occur in that section it will break
if it tries to use rcu_irq_enter().
Originally, this happens with the stack_tracer, because it will call
save_stack_trace when it encounters stack usage that is greater than any
stack usage it had encountered previously. There was a case where that
happened in the RCU section where rcu_irq_enter() did not work, and lockdep
complained loudly about it. To fix it, stack tracing added a call to be
disabled and RCU would disable stack tracing during the critical section
that rcu_irq_enter() was inoperable. This solution worked, but there are
other cases that use rcu_irq_enter() and it would be a good idea to let RCU
give a way to let others know that rcu_irq_enter() will not work. For
example, in trace events.
Another helpful aspect of this change is that it also moves the per cpu
variable called in the RCU critical section into a cache locale along with
other RCU per cpu variables used in that same location.
I'm keeping the stack_trace_disable() code, as that still could be used in
the future by places that really need to disable it. And since it's only a
static inline, it wont take up any kernel text if it is not used.
Link: http://lkml.kernel.org/r/20170405093207.404f8deb@gandalf.local.home
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to eliminate a function call, make "trace_active" into
"disable_stack_tracer" and convert stack_tracer_disable() and friends into
static inline functions.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There are certain parts of the kernel that cannot let stack tracing
proceed (namely in RCU), because the stack tracer uses RCU, and parts of RCU
internals cannot handle having RCU read side locks taken.
Add stack_tracer_disable() and stack_tracer_enable() functions to let RCU
stop stack tracing on the current CPU when it is in those critical sections.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The updates to the trace_active per cpu variable can be updated with the
__this_cpu_*() functions as it only gets updated on the CPU that the variable
is on.
Thanks to Paul McKenney for suggesting __this_cpu_* instead of this_cpu_*.
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function tracer needs to be more careful than other subsystems when it
comes to freeing data. Especially if that data is actually executable code.
When a single function is traced, a trampoline can be dynamically allocated
which is called to jump to the function trace callback. When the callback is
no longer needed, the dynamic allocated trampoline needs to be freed. This
is where the issues arise. The dynamically allocated trampoline must not be
used again. As function tracing can trace all subsystems, including
subsystems that are used to serialize aspects of freeing (namely RCU), it
must take extra care when doing the freeing.
Before synchronize_rcu_tasks() was around, there was no way for the function
tracer to know that nothing was using the dynamically allocated trampoline
when CONFIG_PREEMPT was enabled. That's because a task could be indefinitely
preempted while sitting on the trampoline. Now with synchronize_rcu_tasks(),
it will wait till all tasks have either voluntarily scheduled (not on the
trampoline) or goes into userspace (not on the trampoline). Then it is safe
to free the trampoline even with CONFIG_PREEMPT set.
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com
Cc: stable@vger.kernel.org
Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When a kretprobe is installed on a kernel function, there is a maximum
limit of how many calls in parallel it can catch (aka "maxactive"). A
kernel module could call register_kretprobe() and initialize maxactive
(see example in samples/kprobes/kretprobe_example.c).
But that is not exposed to userspace and it is currently not possible to
choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events
The default maxactive can be as low as 1 on single-core with a
non-preemptive kernel. This is too low and we need to increase it not
only for recursive functions, but for functions that sleep or resched.
This patch updates the format of the command that can be written to
kprobe_events so that maxactive can be optionally specified.
I need this for a bpf program attached to the kretprobe of
inet_csk_accept, which can sleep for a long time.
This patch includes a basic selftest:
> # ./ftracetest -v test.d/kprobe/
> === Ftrace unit tests ===
> [1] Kprobe dynamic event - adding and removing [PASS]
> [2] Kprobe dynamic event - busy event check [PASS]
> [3] Kprobe dynamic event with arguments [PASS]
> [4] Kprobes event arguments with types [PASS]
> [5] Kprobe dynamic event with function tracer [PASS]
> [6] Kretprobe dynamic event with arguments [PASS]
> [7] Kretprobe dynamic event with maxactive [PASS]
>
> # of passed: 7
> # of failed: 0
> # of unresolved: 0
> # of untested: 0
> # of unsupported: 0
> # of xfailed: 0
> # of undefined(test bug): 0
BugLink: https://github.com/iovisor/bcc/issues/1072
Link: http://lkml.kernel.org/r/1491215782-15490-1-git-send-email-alban@kinvolk.io
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Relying on free_reserved_area() to call ftrace to free init memory proved to
not be sufficient. The issue is that on x86, when debug_pagealloc is
enabled, the init memory is not freed, but simply set as not present. Since
ftrace was uninformed of this, starting function tracing still tries to
update pages that are not present according to the page tables, causing
ftrace to bug, as well as killing the kernel itself.
Instead of relying on free_reserved_area(), have init/main.c call ftrace
directly just before it frees the init memory. Then it needs to use
__init_begin and __init_end to know where the init memory location is.
Looking at all archs (and testing what I can), it appears that this should
work for each of them.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
I noticed that if I use dd to read the set_ftrace_filter file that the first
hash command is repeated.
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo do_IRQ >> set_ftrace_filter
# echo schedule:traceoff >> set_ftrace_filter
# echo do_IRQ:traceoff >> set_ftrace_filter
# cat set_ftrace_filter
schedule
do_IRQ
schedule:traceoff:unlimited
do_IRQ:traceoff:unlimited
# dd if=set_ftrace_filter bs=1
schedule
do_IRQ
schedule:traceoff:unlimited
schedule:traceoff:unlimited
do_IRQ:traceoff:unlimited
98+0 records in
98+0 records out
98 bytes copied, 0.00265011 s, 37.0 kB/s
This is due to the way t_start() calls t_next() as well as the seq_file
calls t_next() and the state is slightly different between the two. Namely,
t_start() will call t_next() with a local "pos" variable.
By separating out the function listing from t_next() into its own function,
we can have better control of outputting the functions and the hash of
triggers. This simplifies the code.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If all functions are enabled, there's a comment displayed in the file to
denote that:
# cd /sys/kernel/debug/tracing
# cat set_ftrace_filter
#### all functions enabled ####
If a function trigger is set, those are displayed as well:
# echo schedule:traceoff >> /debug/tracing/set_ftrace_filter
# cat set_ftrace_filter
#### all functions enabled ####
schedule:traceoff:unlimited
But if you read that file with dd, the output can change:
# dd if=/debug/tracing/set_ftrace_filter bs=1
#### all functions enabled ####
32+0 records in
32+0 records out
32 bytes copied, 7.0237e-05 s, 456 kB/s
This is because the "pos" variable is updated for the comment, but func_pos
is not. "func_pos" is used by the triggers (or hashes) to know how many
functions were printed and it bases its index from the pos - func_pos.
func_pos should be 1 to count for the comment printed. But since it is not,
t_hash_start() thinks that one trigger was already printed.
The cat gets to t_hash_start() via t_next() and not t_start() which updates
both pos and func_pos.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The loop in t_start() of calling t_next() will call t_hash_start() if the
pos is beyond the functions and enters the hash items. There's no reason to
check if p is NULL and call t_hash_start(), as that would be redundant.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of testing if the hash to use is the filter_hash or the notrace_hash
at each iteration, do the test at open, and set the iter->hash to point to
the corresponding filter or notrace hash. Then use that directly instead of
testing which hash needs to be used each iteration.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The return status check of __seq_open_private() is rather strange:
iter = __seq_open_private();
if (iter) {
/* do stuff */
}
return iter ? 0 : -ENOMEM;
It makes much more sense to do the return of failure right away:
iter = __seq_open_private();
if (!iter)
return -ENOMEM;
/* do stuff */
return 0;
This clean up will make updates to this code a bit nicer.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently trace_handle_return() looks like this:
static inline enum print_line_t trace_handle_return(struct trace_seq *s)
{
return trace_seq_has_overflowed(s) ?
TRACE_TYPE_PARTIAL_LINE : TRACE_TYPE_HANDLED;
}
Where trace_seq_overflowed(s) is:
static inline bool trace_seq_has_overflowed(struct trace_seq *s)
{
return s->full || seq_buf_has_overflowed(&s->seq);
}
And seq_buf_has_overflowed(&s->seq) is:
static inline bool
seq_buf_has_overflowed(struct seq_buf *s)
{
return s->len > s->size;
}
Making trace_handle_return() into:
return (s->full || (s->seq->len > s->seq->size)) ?
TRACE_TYPE_PARTIAL_LINE :
TRACE_TYPE_HANDLED;
One would think this is not an issue to keep as an inline. But because this
is used in the TRACE_EVENT() macro, it is extended for every tracepoint in
the system. Taking a look at a single tracepoint x86_irq_vector (was the
first one I randomly chosen). As trace_handle_return is used in the
TRACE_EVENT() macro of trace_raw_output_##call() we disassemble
trace_raw_output_x86_irq_vector and do a diff:
- is the original
+ is the out-of-line code
I removed identical lines that were different just due to different
addresses.
--- /tmp/irq-vec-orig 2017-03-16 09:12:48.569384851 -0400
+++ /tmp/irq-vec-ool 2017-03-16 09:13:39.378153385 -0400
@@ -6,27 +6,23 @@
53 push %rbx
48 89 fb mov %rdi,%rbx
4c 8b a7 c0 20 00 00 mov 0x20c0(%rdi),%r12
e8 f7 72 13 00 callq ffffffff81155c80 <trace_raw_output_prep>
83 f8 01 cmp $0x1,%eax
74 05 je ffffffff8101e993 <trace_raw_output_x86_irq_vector+0x23>
5b pop %rbx
41 5c pop %r12
5d pop %rbp
c3 retq
41 8b 54 24 08 mov 0x8(%r12),%edx
- 48 8d bb 98 10 00 00 lea 0x1098(%rbx),%rdi
+ 48 81 c3 98 10 00 00 add $0x1098,%rbx
- 48 c7 c6 7b 8a a0 81 mov $0xffffffff81a08a7b,%rsi
+ 48 c7 c6 ab 8a a0 81 mov $0xffffffff81a08aab,%rsi
- e8 c5 85 13 00 callq ffffffff81156f70 <trace_seq_printf>
=== here's the start of the main difference ===
+ 48 89 df mov %rbx,%rdi
+ e8 62 7e 13 00 callq ffffffff81156810 <trace_seq_printf>
- 8b 93 b8 20 00 00 mov 0x20b8(%rbx),%edx
- 31 c0 xor %eax,%eax
- 85 d2 test %edx,%edx
- 75 11 jne ffffffff8101e9c8 <trace_raw_output_x86_irq_vector+0x58>
- 48 8b 83 a8 20 00 00 mov 0x20a8(%rbx),%rax
- 48 39 83 a0 20 00 00 cmp %rax,0x20a0(%rbx)
- 0f 93 c0 setae %al
+ 48 89 df mov %rbx,%rdi
+ e8 4a c5 12 00 callq ffffffff8114af00 <trace_handle_return>
5b pop %rbx
- 0f b6 c0 movzbl %al,%eax
=== end ===
41 5c pop %r12
5d pop %rbp
c3 retq
If you notice, the original has 22 bytes of text more than the out of line
version. As this is for every TRACE_EVENT() defined in the system, this can
become quite large.
text data bss dec hex filename
8690305 5450490 1298432 15439227 eb957b vmlinux-orig
8681725 5450490 1298432 15430647 eb73f7 vmlinux-handle
This change has a total of 8580 bytes in savings.
$ objdump -dr /tmp/vmlinux-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l
324
That's 324 tracepoints. But this does not include modules (which contain
many more tracepoints). For an allyesconfig build:
$ objdump -dr vmlinux-allyes-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l
1401
That's 1401 tracepoints giving us:
text data bss dec hex filename
137920629 140221067 53264384 331406080 13c0db00 vmlinux-allyes-orig
137827709 140221067 53264384 331313160 13bf7008 vmlinux-allyes-handle
92920 bytes in savings!!!
Link: http://lkml.kernel.org/r/20170315021431.13107-2-andi@firstfloor.org
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding a hook into free_reserve_area() that informs ftrace that boot up init
text is being free, lets ftrace safely remove those init functions from its
records, which keeps ftrace from trying to modify text that no longer
exists.
Note, this still does not allow for tracing .init text of modules, as
modules require different work for freeing its init code.
Link: http://lkml.kernel.org/r/1488502497.7212.24.camel@linux.intel.com
Cc: linux-mm@kvack.org
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Requested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Register the function tracer right after the tracing buffers are initialized
in early boot up. This will allow function tracing to begin early if it is
enabled via the kernel command line.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As tracing can now be enabled very early in boot up, even before some
critical system services (like scheduling), do not run the tracer selftests
until after early_initcall() is performed. If a tracer is registered before
such time, it is saved off in a list and the test is run when the system is
able to handle more diverse functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Create an early_trace_init() function that will initialize the buffers and
allow for ealier use of trace_printk(). This will also allow for future work
to have function tracing start earlier at boot up.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
New features:
- Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction
decoder used in the Intel PT code to study hot paths to samples (Andi Kleen)
Kernel:
- Default UPROBES_EVENTS to Y (Alexei Starovoitov)
- Fix check for kretprobe offset within function entry (Naveen N. Rao)
Infrastructure:
- Introduce util func is_sdt_event() (Ravi Bangoria)
- Make perf_event__synthesize_mmap_events() scale on older kernels where
reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Bg5M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction
decoder used in the Intel PT code to study hot paths to samples (Andi Kleen)
Kernel changes:
- Default UPROBES_EVENTS to Y (Alexei Starovoitov)
- Fix check for kretprobe offset within function entry (Naveen N. Rao)
Infrastructure changes:
- Introduce util func is_sdt_event() (Ravi Bangoria)
- Make perf_event__synthesize_mmap_events() scale on older kernels where
reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As it is already turned on by most distros, so just flip the default to
Y.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: David Miller <davem@davemloft.net>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170316005817.GA6805@ast-mbp.thefacebook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf specifies an offset from _text and since this offset is fed
directly into the arch-specific helper, kprobes tracer rejects
installation of kretprobes through perf. Fix this by looking up the
actual offset from a function for the specified sym+offset.
Refactor and reuse existing routines to limit code duplication -- we
repurpose kprobe_addr() for determining final kprobe address and we
split out the function entry offset determination into a separate
generic helper.
Before patch:
naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
probe-definition(0): do_open%return
symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /boot/vmlinux for symbols
Open Debuginfo file: /boot/vmlinux
Try to find probe point from debuginfo.
Matched function: do_open [2d0c7ff]
Probe point found: do_open+0
Matched function: do_open [35d76dc]
found inline addr: 0xc0000000004ba9c4
Failed to find "do_open%return",
because do_open is an inlined function and has no return point.
An error occurred in debuginfo analysis (-22).
Trying to use symbols.
Opening /sys/kernel/debug/tracing//README write=0
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: r:probe/do_open _text+4469776
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
naveen@ubuntu:~/linux/tools/perf$ dmesg | tail
<snip>
[ 33.568656] Given offset is not valid for return probe.
After patch:
naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
probe-definition(0): do_open%return
symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /boot/vmlinux for symbols
Open Debuginfo file: /boot/vmlinux
Try to find probe point from debuginfo.
Matched function: do_open [2d0c7d6]
Probe point found: do_open+0
Matched function: do_open [35d76b3]
found inline addr: 0xc0000000004ba9e4
Failed to find "do_open%return",
because do_open is an inlined function and has no return point.
An error occurred in debuginfo analysis (-22).
Trying to use symbols.
Opening /sys/kernel/debug/tracing//README write=0
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: r:probe/do_open _text+4469808
Writing event: r:probe/do_open_1 _text+4956344
Added new events:
probe:do_open (on do_open%return)
probe:do_open_1 (on do_open%return)
You can now use it in all perf tools, such as:
perf record -e probe:do_open_1 -aR sleep 1
naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list
c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED]
c0000000004ba0b8 r do_open+0x8 [DISABLED]
c000000000443430 r do_open+0x0 [DISABLED]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix typos and add the following to the scripts/spelling.txt:
overide||override
While we are here, fix the doubled "address" in the touched line
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt.
Also, fix the comment block style in the touched hunks in
drivers/media/dvb-frontends/drx39xyj/drx_driver.h.
Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Ingo Molnar:
"This includes a fix for a crash if certain special addresses are
kprobed, plus does a rename of two Kconfig variables that were a minor
misnomer"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS
kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed
window. Namely powerpc broke as jump labels uses the two LSB bits as flags
in initialization. A check was added to make sure that all jump label
entries were 4 bytes aligned, but powerpc didn't work that way for modules.
Adding an alignment in the module linker script appeared to be the best
solution.
Jump labels also added an anonymous union to access those LSB bits as a
normal long. But because this structure had static initialization, it broke
older compilers that could not statically initialize anonymous unions
without brackets.
The command line parameter for setting function graph filter broke the
"EMPTY_HASH" descriptor by modifying it instead of creating a new hash to
hold the entries.
The command line parameter ftrace_graph_max_depth was added to allow its
setting at boot time. It uses existing code and only the command line hook
was added. This is not really a fix, but as it uses existing code without
affecting anything else, I added it to this release. It was ready before the
merge window closed, but I wanted to let it sit in linux-next for a couple
of days first.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYvNrAFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
JGQIAMkayeZ0OCyYHRPR4EcCrdE3fATmt1huJWHrMPnT4/fLabL8XQqrOpnOBMq1
GFZb1SMkBmvGtAHF4GbvCxnIUfDQko6BTQAd8EMea1WM8+Kb66/BLgJawjWIU9I0
dNYre9ONgR2NOzkz6nfKRXnmy0lRcOweBb09YYGSzY11Md7d8T3T4TUrPNZdYrO9
8ZMbF4qRd9KLMRHcsWqvhWhBISxWnmtUSlthfweukKgDMy8OKpb7pR0ckjtYwsWX
RF41jqLqzSUqtd/nE2Sj/aT8XOP4pfrKEUuNM4SBj8q5jmNcZuqi8Q9wItu3LWR2
jqM/9UKTzaCr9cchwuvUC0i+jWc=
=kDql
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"There was some breakage with the changes for jump labels in the 4.11
merge window:
- powerpc broke as jump labels uses the two LSB bits as flags in
initialization.
A check was added to make sure that all jump label entries were 4
bytes aligned, but powerpc didn't work that way for modules. Adding
an alignment in the module linker script appeared to be the best
solution.
- Jump labels also added an anonymous union to access those LSB bits
as a normal long. But because this structure had static
initialization, it broke older compilers that could not statically
initialize anonymous unions without brackets.
- The command line parameter for setting function graph filter broke
the "EMPTY_HASH" descriptor by modifying it instead of creating a
new hash to hold the entries.
- The command line parameter ftrace_graph_max_depth was added to
allow its setting at boot time. It uses existing code and only the
command line hook was added.
This is not really a fix, but as it uses existing code without
affecting anything else, I added it to this release. It was ready
before the merge window closed, but I wanted to let it sit in
linux-next for a couple of days first"
* tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/graph: Add ftrace_graph_max_depth kernel parameter
tracing: Add #undef to fix compile error
jump_label: Add comment about initialization order for anonymous unions
jump_label: Fix anonymous union initialization
module: set __jump_table alignment to 8
ftrace/graph: Do not modify the EMPTY_HASH for the function_graph filter
tracing: Fix code comment for ftrace_ops_get_func()
New features:
- Allow sorting by symbol_size in 'perf report' and 'perf top' (Charles Baylis)
E.g.:
# perf report -s symbol_size,symbol
Samples: 9K of event 'cycles:k', Event count (approx.): 2870461623
Overhead Symbol size Symbol
14.55% 326 [k] flush_tlb_mm_range
7.20% 1045 [k] filemap_map_pages
5.82% 124 [k] vma_interval_tree_insert
5.18% 2430 [k] unmap_page_range
2.57% 571 [k] vma_interval_tree_remove
1.94% 494 [k] page_add_file_rmap
1.82% 740 [k] page_remove_rmap
1.66% 1017 [k] release_pages
1.57% 1636 [k] update_blocked_averages
1.57% 76 [k] unlock_page
- Add support for -p/--pid, -a/--all-cpus and -C/--cpu in 'perf ftrace' (Namhyung Kim)
Change in behaviour:
- Make system wide (-a) the default option if no target was specified and one
of following conditions is met:
- No workload specified (current behaviour)
- A workload is specified but all requested events are system wide ones,
like uncore ones. (Jiri Olsa)
Fixes:
- Add missing initialization to the instruction decoder used in the
intel PT/BTS code, which was causing lots of failures in 'perf test',
looking for a value when there was none (Adrian Hunter)
Infrastructure:
- Add arch code needed to adopt the kernel's refcount_t to aid in
catching bugs when using atomic_t as a reference counter, basically
cmpxchg related functions (Arnaldo Carvalho de Melo)
- Convert the code using atomic_t as reference counts to refcount_t
(Elena Rashetova)
- Add feature test for sched_getcpu() to more easily check for its
presence in the many libc implementations and accross different
versions of such C libraries (Arnaldo Carvalho de Melo)
- Issue a HW watchdog disable hint in 'perf stat' for when some of the
requested events can't get counted because a PMU counter is taken by that
watchdog (Borislav Petkov).
- Add mapping for Intel's KnightsMill PMU events (Karol Wachowski)
Documentation:
- Clarify the term 'convergence' in:
perf bench numa numa-mem -h --show_convergence (Jiri Olsa)
Kernel code:
- Ensure probe location is at function entry in kretprobes (Naveen N. Rao)
- Allow return probes with offsets and absolute addresses (Naveen N. Rao)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=h2yo
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.11-20170306' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Allow sorting by symbol_size in 'perf report' and 'perf top' (Charles Baylis)
E.g.:
# perf report -s symbol_size,symbol
Samples: 9K of event 'cycles:k', Event count (approx.): 2870461623
Overhead Symbol size Symbol
14.55% 326 [k] flush_tlb_mm_range
7.20% 1045 [k] filemap_map_pages
5.82% 124 [k] vma_interval_tree_insert
5.18% 2430 [k] unmap_page_range
2.57% 571 [k] vma_interval_tree_remove
1.94% 494 [k] page_add_file_rmap
1.82% 740 [k] page_remove_rmap
1.66% 1017 [k] release_pages
1.57% 1636 [k] update_blocked_averages
1.57% 76 [k] unlock_page
- Add support for -p/--pid, -a/--all-cpus and -C/--cpu in 'perf ftrace' (Namhyung Kim)
Change in behaviour:
- Make system wide (-a) the default option if no target was specified and one
of following conditions is met:
- No workload specified (current behaviour)
- A workload is specified but all requested events are system wide ones,
like uncore ones. (Jiri Olsa)
Fixes:
- Add missing initialization to the instruction decoder used in the
intel PT/BTS code, which was causing lots of failures in 'perf test',
looking for a value when there was none (Adrian Hunter)
Infrastructure changes:
- Add arch code needed to adopt the kernel's refcount_t to aid in
catching bugs when using atomic_t as a reference counter, basically
cmpxchg related functions (Arnaldo Carvalho de Melo)
- Convert the code using atomic_t as reference counts to refcount_t
(Elena Rashetova)
- Add feature test for sched_getcpu() to more easily check for its
presence in the many libc implementations and accross different
versions of such C libraries (Arnaldo Carvalho de Melo)
- Issue a HW watchdog disable hint in 'perf stat' for when some of the
requested events can't get counted because a PMU counter is taken by that
watchdog (Borislav Petkov).
- Add mapping for Intel's KnightsMill PMU events (Karol Wachowski)
Documentation changes:
- Clarify the term 'convergence' in:
perf bench numa numa-mem -h --show_convergence (Jiri Olsa)
Kernel code changes:
- Ensure probe location is at function entry in kretprobes (Naveen N. Rao)
- Allow return probes with offsets and absolute addresses (Naveen N. Rao)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Let's not remove the warning about offsets and return probes when the
offset is invalid.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170227115204.00f92846@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the kernel includes many non-global functions with same names, we
will need to use offsets from other symbols (typically _text/_stext) or
absolute addresses to place return probes on specific functions. Also,
the core register_kretprobe() API never forbid use of offsets or
absolute addresses with kretprobes.
Allow its use with the trace infrastructure. To distinguish kernels that
support this, update ftrace README to explicitly call this out.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/183e7ce2921a08c9c755ee9a5da3134febc6695b.1487770934.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Early trace callgraphs can be extremely large on systems with
several seconds of boot time. The max_depth parameter limits how
deep the graph trace goes and reduces the output size. This
parameter is the same as the max_graph_depth file in tracefs.
Link: http://lkml.kernel.org/r/1488499935-23216-1-git-send-email-todd.e.brandt@linux.intel.com
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
[ changed comments about debugfs to tracefs ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
On boot up, if the kernel command line sets a graph funtion with the kernel
command line options "ftrace_graph_filter" or "ftrace_graph_notrace" then it
updates the corresponding function graph hash, ftrace_graph_hash or
ftrace_graph_notrace_hash respectively. Unfortunately, at boot up, these
variables are pointers to the "EMPTY_HASH" which is a constant used as a
placeholder when a hash has no entities. The problem was that the comand
line version to set the hashes updated the actual EMPTY_HASH instead of
creating a new hash for the function graph. This broke the EMPTY_HASH
because not only did it modify a constant (not sure how that was allowed to
happen, except maybe because it was done at early boot, const variables were
still mutable), but it made the filters have functions listed in them when
they were actually empty.
The kernel command line function needs to allocate a new hash for the
function graph filters and assign the necessary variables to that new hash
instead.
Link: http://lkml.kernel.org/r/1488420091.7212.17.camel@linux.intel.com
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We don't actually need the full rculist.h header in sched.h anymore,
we will be able to include the smaller rcupdate.h header instead.
But first update code that relied on the implicit header inclusion.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
The APIs that are going to be moved first are:
mm_alloc()
__mmdrop()
mmdrop()
mmdrop_async_fn()
mmdrop_async()
mmget_not_zero()
mmput()
mmput_async()
get_task_mm()
mm_access()
mm_release()
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to move scheduler ABI details to <uapi/linux/sched/types.h>,
which will be used from a number of .c files.
Create empty placeholder header that maps to <linux/types.h>.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.
Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have uses of CONFIG_UPROBE_EVENT and CONFIG_KPROBE_EVENT as
well as CONFIG_UPROBE_EVENTS and CONFIG_KPROBE_EVENTS.
Consistently use the plurals.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: davem@davemloft.net
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/20170216060050.20866-1-anton@ozlabs.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
bug that was caused by a race condition in initializing the hwlat
thread. When fixing this code, I realized that it should have been done
differently. Instead of doing the rewrite and sending that to stable,
I just sent the above commit to fix the bug that should be back ported.
This commit is on top of the quick fix commit to rewrite the code the
way it should have been written in the first place.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYtDsNFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
+CQH/0BhSwjiCnlHAkHNFKn47O0yDtxBLj8ar4bUQRacDXeQyAGDP13hn3q3LvG9
CRzDXaYrusA3fjGcgmtyU33am6LK84dPn5u2HSyEalDZNBel8l6oYLUZVWLgef02
x43949nOeBy+KO02Y118zGyxFEPtYBnCVpguMa4vdVgnr04gECo2VH5FjnLMslKM
W1j/WrbVaO8WObh7X01JZzozWwp3McW4x6H8PUWaHjnhN/Iv6+YGtNN/Sa4cq4V/
CyCfxrZvN/Y/uMSGzVlhuXxeRc2PRsjjmAqN+8P4KZIGW5BstdiWbrVj+KaBLR9z
6QERD3atiEIYI/QGEep7ZH795PI=
=Bdwk
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull another tracing update from Steven Rostedt:
"Commit 79c6f448c8 ("tracing: Fix hwlat kthread migration") fixed a
bug that was caused by a race condition in initializing the hwlat
thread. When fixing this code, I realized that it should have been
done differently. Instead of doing the rewrite and sending that to
stable, I just sent the above commit to fix the bug that should be
back ported.
This commit is on top of the quick fix commit to rewrite the code the
way it should have been written in the first place"
* tag 'trace-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Clean up the hwlat binding code
and small optimizations.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJYtDiAFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
KygH/3sxuM9MCeJ29JsjmV49fHcNqryNZdvSadmnysPm+dFPiI6IgIIbh5R8H89b
2V2gfQSmOTKHu3/wvJr/MprkGP275sWlZPORYFLDl/+NE/3q7g0NKOMWunLcv6dH
QQRJIFjSMeGawA3KYBEcwBYMlgNd2VgtTxqLqSBhWth5omV6UevJNHhe3xzZ4nEE
YbRX2mxwOuRHOyFp0Hem+Bqro4z1VXJ6YDxOvae2PP8krrIhIHYw9EI22GK68a2g
EyKqKPPaEzfU8IjHIQCqIZta5RufnCrDbfHU0CComPANBRGO7g+ZhLO11a/Z316N
lyV7JqtF680iem7NKcQlwEwhlLE=
=HJnl
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This release has no new tracing features, just clean ups, minor fixes
and small optimizations"
* tag 'trace-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (25 commits)
tracing: Remove outdated ring buffer comment
tracing/probes: Fix a warning message to show correct maximum length
tracing: Fix return value check in trace_benchmark_reg()
tracing: Use modern function declaration
jump_label: Reduce the size of struct static_key
tracing/probe: Show subsystem name in messages
tracing/hwlat: Update old comment about migration
timers: Make flags output in the timer_start tracepoint useful
tracing: Have traceprobe_probes_write() not access userspace unnecessarily
tracing: Have COMM event filter key be treated as a string
ftrace: Have set_graph_function handle multiple functions in one write
ftrace: Do not hold references of ftrace_graph_{notrace_}hash out of graph_lock
tracing: Reset parser->buffer to allow multiple "puts"
ftrace: Have set_graph_functions handle write with RDWR
ftrace: Reset fgd->hash in ftrace_graph_write()
ftrace: Replace (void *)1 with a meaningful macro name FTRACE_GRAPH_EMPTY
ftrace: Create a slight optimization on searching the ftrace_hash
tracing: Add ftrace_hash_key() helper function
ftrace: Convert graph filter to use hash tables
ftrace: Expose ftrace_hash_empty and ftrace_lookup_ip
...
There is no function 'ftrace_ops_recurs_func' existing in the current code,
it was renamed to ftrace_ops_assist_func() in commit c68c0fa293
("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too").
Update the comment to the correct function name.
Link: http://lkml.kernel.org/r/1487723366-14463-1-git-send-email-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull namespace updates from Eric Biederman:
"There is a lot here. A lot of these changes result in subtle user
visible differences in kernel behavior. I don't expect anything will
care but I will revert/fix things immediately if any regressions show
up.
From Seth Forshee there is a continuation of the work to make the vfs
ready for unpriviled mounts. We had thought the previous changes
prevented the creation of files outside of s_user_ns of a filesystem,
but it turns we missed the O_CREAT path. Ooops.
Pavel Tikhomirov and Oleg Nesterov worked together to fix a long
standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only
children that are forked after the prctl are considered and not
children forked before the prctl. The only known user of this prctl
systemd forks all children after the prctl. So no userspace
regressions will occur. Holding earlier forked children to the same
rules as later forked children creates a semantic that is sane enough
to allow checkpoing of processes that use this feature.
There is a long delayed change by Nikolay Borisov to limit inotify
instances inside a user namespace.
Michael Kerrisk extends the API for files used to maniuplate
namespaces with two new trivial ioctls to allow discovery of the
hierachy and properties of namespaces.
Konstantin Khlebnikov with the help of Al Viro adds code that when a
network namespace exits purges it's sysctl entries from the dcache. As
in some circumstances this could use a lot of memory.
Vivek Goyal fixed a bug with stacked filesystems where the permissions
on the wrong inode were being checked.
I continue previous work on ptracing across exec. Allowing a file to
be setuid across exec while being ptraced if the tracer has enough
credentials in the user namespace, and if the process has CAP_SETUID
in it's own namespace. Proc files for setuid or otherwise undumpable
executables are now owned by the root in the user namespace of their
mm. Allowing debugging of setuid applications in containers to work
better.
A bug I introduced with permission checking and automount is now
fixed. The big change is to mark the mounts that the kernel initiates
as a result of an automount. This allows the permission checks in sget
to be safely suppressed for this kind of mount. As the permission
check happened when the original filesystem was mounted.
Finally a special case in the mount namespace is removed preventing
unbounded chains in the mount hash table, and making the semantics
simpler which benefits CRIU.
The vfs fix along with related work in ima and evm I believe makes us
ready to finish developing and merge fully unprivileged mounts of the
fuse filesystem. The cleanups of the mount namespace makes discussing
how to fix the worst case complexity of umount. The stacked filesystem
fixes pave the way for adding multiple mappings for the filesystem
uids so that efficient and safer containers can be implemented"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc/sysctl: Don't grab i_lock under sysctl_lock.
vfs: Use upper filesystem inode in bprm_fill_uid()
proc/sysctl: prune stale dentries during unregistering
mnt: Tuck mounts under others instead of creating shadow/side mounts.
prctl: propagate has_child_subreaper flag to every descendant
introduce the walk_process_tree() helper
nsfs: Add an ioctl() to return owner UID of a userns
fs: Better permission checking for submounts
exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction
vfs: open() with O_CREAT should not create inodes with unknown ids
nsfs: Add an ioctl() to return the namespace type
proc: Better ownership of files for non-dumpable tasks in user namespaces
exec: Remove LSM_UNSAFE_PTRACE_CAP
exec: Test the ptracer's saved cred to see if the tracee can gain caps
exec: Don't reset euid and egid when the tracee has CAP_SETUID
inotify: Convert to using per-namespace limits
Patch series "DAX tracepoints, mm argument simplification", v4.
This contains both my DAX tracepoint code and Dave Jiang's MM argument
simplifications. Dave's code was written with my tracepoint code as a
baseline, so it seemed simplest to keep them together in a single series.
This patch (of 7):
Add __print_flags_u64() and the helper trace_print_flags_seq_u64() in the
same spirit as __print_symbolic_u64() and trace_print_symbols_seq_u64().
These functions allow us to print symbols associated with flags that are
64 bits wide even on 32 bit machines.
These will be used by the DAX code so that we can print the flags set in a
pfn_t such as PFN_SG_CHAIN, PFN_SG_LAST, PFN_DEV and PFN_MAP.
Without this new function I was getting errors like the following when
compiling for i386:
include/linux/pfn_t.h:13:22: warning: large integer implicitly truncated to unsigned type [-Woverflow]
#define PFN_SG_CHAIN (1ULL << (BITS_PER_LONG_LONG - 1))
^
Link: http://lkml.kernel.org/r/1484085142-2297-2-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
All map types and prog types are registered to the BPF core through
bpf_register_map_type() and bpf_register_prog_type() during init and
remain unchanged thereafter. As by design we don't (and never will)
have any pluggable code that can register to that at any later point
in time, lets mark all the existing bpf_{map,prog}_type_list objects
in the tree as __ro_after_init, so they can be moved to read-only
section from then onwards.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comment about ring buffer's organization is outdated and the code sits
elsewhere, remove the comment.
Link: http://lkml.kernel.org/r/20170217041058.23904-1-joelaf@google.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since tracing/*probe_events will accept a probe definition
up to 4096 - 2 ('\n' and '\0') bytes, it must show 4094 instead
of 4096 in warning message.
Note that there is one possible case of exceed 4094. If user
prepare 4096 bytes null-terminated string and syscall write
it with the count == 4095, then it can be accepted. However,
if user puts a '\n' after that, it must rejected.
So IMHO, the warning message should indicate shorter one,
since it is safer.
Link: http://lkml.kernel.org/r/148673290462.2579.7966778294009665632.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In case of error, the function kthread_run() returns ERR_PTR() and never
returns NULL. The NULL test in the return value check should be replaced
with IS_ERR().
Link: http://lkml.kernel.org/r/20170112135502.28556-1-weiyj.lk@gmail.com
Cc: stable@vger.kernel.org
Fixes: 81dc9f0e ("tracing: Add tracepoint benchmark tracepoint")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We get a lot of harmless warnings about this header file at W=1 level
because of an unusual function declaration:
kernel/trace/trace.h:766:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
This moves the inline statement where it normally belongs, avoiding the
warning.
Link: http://lkml.kernel.org/r/20170123122521.3389010-1-arnd@arndb.de
Fixes: 4046bf023b ("ftrace: Expose ftrace_hash_empty and ftrace_lookup_ip")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Show "trace_probe:", "trace_kprobe:" and "trace_uprobe:"
headers for each warning/error/info message. This will
help people to notice that kprobe/uprobe events caused
those messages.
Link: http://lkml.kernel.org/r/148646647813.24658.16705315294927615333.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The code in traceprobe_probes_write() reads up to 4096 bytes from userpace
for each line. If userspace passes in several lines to execute, the code
will do a large read for each line, even though, it is highly likely that
the first read from userspace received all of the lines at once.
I changed the logic to do a single read from userspace, and to only read
from userspace again if not all of the read from userspace made it in.
I tested this by adding printk()s and writing files that would test -1, ==,
and +1 the buffer size, to make sure that there's no overflows and that if a
single line is written with +1 the buffer size, that it fails properly.
Link: http://lkml.kernel.org/r/20170209180458.5c829ab2@gandalf.local.home
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
John Fastabend