Jon Nelson has found a test case which causes postgresql to fail with
the error:
psql:t.sql:4: ERROR: invalid page header in block 38269 of relation base/16384/16581
Under memory pressure, it looks like part of a file can end up getting
replaced by zero's. Until we can figure out the cause, we'll roll
back the change and use block_write_full_page() instead of
ext4_bio_write_page(). The new, more efficient writing function can
be used via the mount option mblk_io_submit, so we can test and fix
the new page I/O code.
To reproduce the problem, install postgres 8.4 or 9.0, and pin enough
memory such that the system just at the end of triggering writeback
before running the following sql script:
begin;
create temporary table foo as select x as a, ARRAY[x] as b FROM
generate_series(1, 10000000 ) AS x;
create index foo_a_idx on foo (a);
create index foo_b_idx on foo USING GIN (b);
rollback;
If the temporary table is created on a hard drive partition which is
encrypted using dm_crypt, then under memory pressure, approximately
30-40% of the time, pgsql will issue the above failure.
This patch should fix this problem, and the problem will come back if
the file system is mounted with the mblk_io_submit mount option.
Reported-by: Jon Nelson <jnelson@jamponi.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There was concern that FITRIM ioctl is not common enough to be included
in core vfs ioctl, as Christoph Hellwig pointed out there's no real point
in dispatching this out to a separate vector instead of just through
->ioctl.
So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs
from super_operation structure.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path
out of that function returns ret. However, the generic_check_addressable
clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g.
a group checksum error) returns 0 even though the mount should fail. This
causes vfs_kern_mount in turn to think that the mount succeeded, leading to an
oops.
A simple fix is to avoid using ret for the generic_check_addressable check,
which was last changed in commit 30ca22c70e.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the the li_request_list was empty then it returned with the lock
held. Instead of adding a "goto unlock" I just removed that special
case and let it go past the empty list_for_each_safe().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It's not needed to sync the filesystem, and it fixes a lock_dep complaint.
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename). In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed. If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.
To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed. That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).
Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.
kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
Call Trace:
[<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
[<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
[<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
[<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
[<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
[<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
[<ffffffff81087910>] do_writepages+0x1c/0x25
[<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
[<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
[<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
[<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
[<ffffffff810c14a3>] evict+0x22/0x92
[<ffffffff810c1a3d>] iput+0x212/0x249
[<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
[<ffffffff810bdf6b>] d_kill+0x3d/0x5d
[<ffffffff810be613>] dput+0x13a/0x147
[<ffffffff810b990d>] sys_renameat+0x1b5/0x258
[<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
[<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
[<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
[<ffffffff810b99c6>] sys_rename+0x16/0x18
[<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
We now initialize the percpu counters before replaying the journal,
but after the journal, we recalculate the global counters, to deal
with the possibility of the per-blockgroup counts getting updated by
the journal replay.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Newer GCC's reported the following build warning:
fs/ext4/super.c: In function 'ext4_lazyinit_thread':
fs/ext4/super.c:2702: warning: 'ret' may be used uninitialized in this function
Fix it by removing the need for the ret variable in the first place.
Signed-off-by: "Lukas Czerner" <lczerner@redhat.com>
Reported-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the request has been removed from the list and no other request
has been issued, we will end up with next wakeup scheduled to
MAX_JIFFY_OFFSET which is bad. So check for that.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These functions have no need to be exported beyond file context.
No functions needed to be moved for this commit; just some function
declarations changed to be static and removed from header files.
(A similar patch was submitted by Eric Sandeen, but I wanted to handle
code movement in separate patches to make sure code changes didn't
accidentally get dropped.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 84061e0 fixed an accounting bug only to introduce the
possibility of a kernel OOPS if the journal has a non-zero j_errno
field indicating that the file system had detected a fs inconsistency.
After the journal replay, if the journal superblock indicates that the
file system has an error, this indication is transfered to the file
system and then ext4_commit_super() is called to write this to the
disk.
But since the percpu counters are now initialized after the journal
replay, the call to ext4_commit_super() will cause a kernel oops since
it needs to use the percpu counters the ext4 superblock structure.
The fix is to skip setting the ext4 free block and free inode fields
if the percpu counter has not been set.
Thanks to Ken Sumrall for reporting and analyzing the root causes of
this bug.
Addresses-Google-Bug: #3054080
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Should be applied on the top of "lazy inode table initialization"
and "batched discard support" patch-sets.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).
It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks
are marked as used and then trimmed. Afterwards these blocks are marked
as free in per-group bitmap.
Since fstrim is a long operation it is good to have an ability to
interrupt it by a signal. This was added by Dmitry Monakhov.
Thanks Dimitry.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Call the block I/O layer directly instad of going through the buffer
layer. This should give us much better performance and scalability,
as well as lowering our CPU utilization when doing buffered writeback.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
An ext4 filesystem on a read-only device, with an external journal
which is at a different device number then recorded in the superblock
will fail to honor the read-only setting of the device and trigger
a superblock update (write).
For example:
- ext4 on a software raid which is in read-only mode
- external journal on a read-write device which has changed device num
- attempt to mount with -o journal_dev=<new_number>
- hits BUG_ON(mddev->ro = 1) in md.c
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
User-space should have the opportunity to check what features doest ext4
support in each particular copy. This adds easy interface by creating new
"features" directory in sys/fs/ext4/. In that directory files
advertising feature names can be created.
Add lazy_itable_init to the feature list.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the lazy_itable_init extended option is passed to mke2fs, it
considerably speeds up filesystem creation because inode tables are
not zeroed out. The fact that parts of the inode table are
uninitialized is not a problem so long as the block group descriptors,
which contain information regarding how much of the inode table has
been initialized, has not been corrupted However, if the block group
checksums are not valid, e2fsck must scan the entire inode table, and
the the old, uninitialized data could potentially cause e2fsck to
report false problems.
Hence, it is important for the inode tables to be initialized as soon
as possble. This commit adds this feature so that mke2fs can safely
use the lazy inode table initialization feature to speed up formatting
file systems.
This is done via a new new kernel thread called ext4lazyinit, which is
created on demand and destroyed, when it is no longer needed. There
is only one thread for all ext4 filesystems in the system. When the
first filesystem with inititable mount option is mounted, ext4lazyinit
thread is created, then the filesystem can register its request in the
request list.
This thread then walks through the list of requests picking up
scheduled requests and invoking ext4_init_inode_table(). Next schedule
time for the request is computed by multiplying the time it took to
zero out last inode table with wait multiplier, which can be set with
the (init_itable=n) mount option (default is 10). We are doing
this so we do not take the whole I/O bandwidth. When the thread is no
longer necessary (request list is empty) it frees the appropriate
structures and exits (and can be created later later by another
filesystem).
We do not disturb regular inode allocations in any way, it just do not
care whether the inode table is, or is not zeroed. But when zeroing, we
have to skip used inodes, obviously. Also we should prevent new inode
allocations from the group, while zeroing is on the way. For that we
take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem
in the ext4_claim_inode, so when we are unlucky and allocator hits the
group which is currently being zeroed, it just has to wait.
This can be suppresed using the mount option no_init_itable.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
BKL: remove BKL from freevxfs
BKL: remove BKL from qnx4
autofs4: Only declare function when CONFIG_COMPAT is defined
autofs: Only declare function when CONFIG_COMPAT is defined
ncpfs: Lock socket in ncpfs while setting its callbacks
fs/locks.c: prepare for BKL removal
BKL: Remove BKL from ncpfs
BKL: Remove BKL from OCFS2
BKL: Remove BKL from squashfs
BKL: Remove BKL from jffs2
BKL: Remove BKL from ecryptfs
BKL: Remove BKL from afs
BKL: Remove BKL from USB gadgetfs
BKL: Remove BKL from autofs4
BKL: Remove BKL from isofs
BKL: Remove BKL from fat
BKL: Remove BKL from ext2 filesystem
BKL: Remove BKL from do_new_mount()
BKL: Remove BKL from cgroup
BKL: Remove BKL from NTFS
...
The BKL is still used in ext4_put_super(), ext4_fill_super() and
ext4_remount(). All three calles are protected against concurrent calls by
the s_umount rw semaphore of struct super_block.
Therefore the BKL is protecting nothing in this case.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
As part of adding support for OCFS2 to mount huge volumes, we need to
check that the sector_t and page cache of the system are capable of
addressing the entire volume.
An identical check already appears in ext3 and ext4. This patch moves
the addressability check into its own function in fs/libfs.c and
modifies ext3 and ext4 to invoke it.
[Edited to -EINVAL instead of BUG_ON() for bad blocksize_bits -- Joel]
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: Adding error check after calling ext4_mb_regular_allocator()
ext4: Fix dirtying of journalled buffers in data=journal mode
ext4: re-inline ext4_rec_len_(to|from)_disk functions
jbd2: Remove t_handle_lock from start_this_handle()
jbd2: Change j_state_lock to be a rwlock_t
jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
ext4: Add mount options in superblock
ext4: force block allocation on quota_off
ext4: fix freeze deadlock under IO
ext4: drop inode from orphan list if ext4_delete_inode() fails
ext4: check to make make sure bd_dev is set before dereferencing it
jbd2: Make barrier messages less scary
ext4: don't print scary messages for allocation failures post-abort
ext4: fix EFBIG edge case when writing to large non-extent file
ext4: fix ext4_get_blocks references
ext4: Always journal quota file modifications
ext4: Fix potential memory leak in ext4_fill_super
ext4: Don't error out the fs if the user tries to make a file too big
ext4: allocate stripe-multiple IOs on stripe boundaries
ext4: move aio completion after unwritten extent conversion
...
Fix up conflicts in fs/ext4/inode.c as per Ted.
Fix up xfs conflicts as per earlier xfs merge.
Lockstat reports have shown that j_state_lock is a major source of
lock contention, especially on systems with more than 4 CPU cores. So
change it to be a read/write spinlock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Allow mount options to be stored in the superblock. Also add default
mount option bits for nobarrier, block_validity, discard, and nodelalloc.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Perform full sync procedure so that any delayed allocation blocks are
allocated so quota will be consistent.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 6b0310fbf0 caused a regression resulting in deadlocks
when freezing a filesystem which had active IO; the vfs_check_frozen
level (SB_FREEZE_WRITE) did not let the freeze-related IO syncing
through. Duh.
Changing the test to FREEZE_TRANS should let the normal freeze
syncing get through the fs, but still block any transactions from
starting once the fs is completely frozen.
I tested this by running fsstress in the background while periodically
snapshotting the fs and running fsck on the result. I ran into
occasional deadlocks, but different ones. I think this is a
fine fix for the problem at hand, and the other deadlocky things
will need more investigation.
Reported-by: Phillip Susi <psusi@cfl.rr.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are some drivers which may not set bdev->bd_dev. So make sure
it is non-NULL before dereferencing it.
Google-Bug-Id: 1773557
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When journaled quota options are not specified, we do writes
to quota files just in data=ordered mode. This actually causes
warnings from JBD2 about dirty journaled buffer because ext4_getblk
unconditionally treats a block allocated by it as metadata. Since
quota actually is filesystem metadata, the easiest way to get rid
of the warning is to always treat quota writes as metadata...
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Under heavy memory pressure we may hit out of memory
situation and as result kstrdup'ed options will not be
freed. Fix it.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This allows us to grab any file system error messages by scraping
/var/log/messages. This will make it easy for us to do error analysis
across the very large number of machines as we deploy ext4 across the
fleet.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Save number of file system errors, and the time function name, line
number, block number, and inode number of the first and most recent
errors reported on the file system in the superblock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The nobh option was only supported for writeback mode, but given that all
write paths actually create buffer heads it effectively was a no-op already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
quota: Convert quota statistics to generic percpu_counter
ext3 uses rb_node = NULL; to zero rb_root.
quota: Fixup dquot_transfer
reiserfs: Fix resuming of quotas on remount read-write
pohmelfs: Remove dead quota code
ufs: Remove dead quota code
udf: Remove dead quota code
quota: rename default quotactl methods to dquot_
quota: explicitly set ->dq_op and ->s_qcop
quota: drop remount argument to ->quota_on and ->quota_off
quota: move unmount handling into the filesystem
quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
quota: move remount handling into the filesystem
ocfs2: Fix use after free on remount read-only
Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
Follow the dquot_* style used elsewhere in dquot.c.
[Jan Kara: Fixed up missing conversion of ext2]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Remount handling has fully moved into the filesystem, so all this is
superflous now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently the VFS calls into the quotactl interface for unmounting
filesystems. This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount. Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.
Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem. But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
