* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Fix system inodes cache overflow.
ocfs2: Hold ip_lock when set/clear flags for indexed dir.
ocfs2: Adjust masklog flag values
Ocfs2: Teach 'coherency=full' O_DIRECT writes to correctly up_read i_alloc_sem.
ocfs2/dlm: Migrate lockres with no locks if it has a reference
When we store system inodes cache in ocfs2_super,
we use a array for global system inodes. But unfortunately,
the range is calculated wrongly which makes it overflow and
pollute ocfs2_super->local_system_inodes.
This patch fix it by setting the range properly.
The corresponding bug is ossbug1303.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1303
Cc: stable@kernel.org
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When we set/clear the dyn_features for an inode we hold the ip_lock.
So do it when we set/clear OCFS2_INDEXED_DIR_FL also.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Due to newly-introduced 'coherency=full' O_DIRECT writes also takes the EX
rw_lock like buffered writes did(rw_level == 1), it turns out messing the
usage of 'level' in ocfs2_dio_end_io() up, which caused i_alloc_sem being
failed to get up_read'd correctly.
This patch tries to teach ocfs2_dio_end_io to understand well on all locking
stuffs by explicitly introducing a new bit for i_alloc_sem in iocb's private
data, just like what we did for rw_lock.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
o2dlm was not migrating resources with zero locks because it assumed that that
resource would get purged by dlm_thread. However, some usage patterns involve
creating and dropping locks at a high rate leading to the migrate thread seeing
zero locks but the purge thread seeing an active reference. When this happens,
the dlm_thread cannot purge the resource and the migrate thread sees no reason
to migrate that resource. The spell is broken when the migrate thread catches
the resource with a lock.
The fix is to make the migrate thread also consider the reference map.
This usage pattern can be triggered by userspace on userdlm locks and flocks.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If ocfs2_live_connection_list is empty, ocfs2_connection_find() will return
a pointer to the LIST_HEAD, cast as a ocfs2_live_connection. This can cause
an oops when ocfs2_control_send_down() dereferences c->oc_conn:
Call Trace:
[<ffffffffa00c2a3c>] ocfs2_control_message+0x28c/0x2b0 [ocfs2_stack_user]
[<ffffffffa00c2a95>] ocfs2_control_write+0x35/0xb0 [ocfs2_stack_user]
[<ffffffff81143a88>] vfs_write+0xb8/0x1a0
[<ffffffff8155cc13>] ? do_page_fault+0x153/0x3b0
[<ffffffff811442f1>] sys_write+0x51/0x80
[<ffffffff810121b2>] system_call_fastpath+0x16/0x1b
Fix by explicitly returning NULL if no match is found.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Commit 1c66b360fe (Change some lock status member in ocfs2_lock_res
to char.) states that these fields need to be signed due to comparision
to -1, but only changed the type from unsigned char to char. However, it
is a compiler option if char is a signed or unsigned type. Change these
fields to signed char so the code will work with all compilers.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
I suddenly hit the problem during 2.6.37-rc1 regression test, which was
introduced by commit '5e98d492406818e6a94c0ba54c61f59d40cefa4a'(Track
negative entries v3), following scenario reproduces the issue easily:
Node A Node B
================ ============
$touch testfile
$ls testfile
$rm -rf testfile
$touch testfile
$ls testfile
ls: cannot access testfile: No such file or directory
This patch stops tracking the dentry which was negativated by a inode deletion,
so as to force the revaliation in next lookup, in case we'll touch the inode
again in the same node.
It didn't hurt the performance of multiple lookup for none-existed files anyway,
while regresses a bit in the first try after a file deletion.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Stanse found that o2hb_heartbeat_group_make_item leaks some memory on
fail paths. Fix the paths by adding a new label and jump there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: ocfs2-devel@oss.oracle.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
coccinelle check scripts/coccinelle/locks/call_kern.cocci found that
in fs/ocfs2/dlm/dlmdomain.c an allocation with GFP_KERNEL is done
with locks held:
dlm_query_region_handler
spin_lock(dlm_domain_lock)
dlm_match_regions
kmalloc(GFP_KERNEL)
Change it to GFP_ATOMIC.
Signed-off-by: David Sterba <dsterba@suse.cz>
CC: Joel Becker <joel.becker@oracle.com>
CC: Mark Fasheh <mfasheh@suse.com>
CC: ocfs2-devel@oss.oracle.com
--
Exists in v2.6.37-rc1 and current linux-next.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 83fd9c7 changes l_level, l_requested and l_blocking of
ocfs2_lock_res from int to unsigned char. But actually it is
initially as -1(ocfs2_lock_res_init_common) which
correspoding to 255 for unsigned char. So the whole dlm lock
mechanism doesn't work now which means a disaster to ocfs2.
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves. For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions. Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit dd3932eddf ("block: remove BLKDEV_IFL_WAIT") had removed the
flag argument to blkdev_issue_flush(), but the ocfs2 merge brought in a
new one. It didn't cause a merge conflict, so the merges silently
worked out fine, but the result didn't actually compile.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits)
BKL: remove BKL from freevxfs
BKL: remove BKL from qnx4
autofs4: Only declare function when CONFIG_COMPAT is defined
autofs: Only declare function when CONFIG_COMPAT is defined
ncpfs: Lock socket in ncpfs while setting its callbacks
fs/locks.c: prepare for BKL removal
BKL: Remove BKL from ncpfs
BKL: Remove BKL from OCFS2
BKL: Remove BKL from squashfs
BKL: Remove BKL from jffs2
BKL: Remove BKL from ecryptfs
BKL: Remove BKL from afs
BKL: Remove BKL from USB gadgetfs
BKL: Remove BKL from autofs4
BKL: Remove BKL from isofs
BKL: Remove BKL from fat
BKL: Remove BKL from ext2 filesystem
BKL: Remove BKL from do_new_mount()
BKL: Remove BKL from cgroup
BKL: Remove BKL from NTFS
...
It was evaludated to indexed before, check it is ok i think.
Signed-off-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Currently, the default behavior of O_DIRECT writes was allowing
concurrent writing among nodes to the same file, with no cluster
coherency guaranteed (no EX lock held). This can leave stale data in
the cache for buffered reads on other nodes.
The new mount option introduce a chance to choose two different
behaviors for O_DIRECT writes:
* coherency=full, as the default value, will disallow
concurrent O_DIRECT writes by taking
EX locks.
* coherency=buffered, allow concurrent O_DIRECT writes
without EX lock among nodes, which
gains high performance at risk of
getting stale data on other nodes.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Functions such as ocfs2_recovery_init() make use of osb->max_slots.
Initialize osb->max_slots early so the functions may use the correct
value.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
fs/ocfs2/slot_map.c: In function ‘ocfs2_init_slot_info’:
fs/ocfs2/slot_map.c:360: warning: ‘bytes’ may be used uninitialized in this function
fs/ocfs2/slot_map.c:360: note: ‘bytes’ was declared here
Compiler: gcc version 4.4.3 (GCC) on Mandriva
I'm not sure why this warning occurs, I think compiler don't know that variable
"bytes" is initialized when it is sent by reference to
ocfs2_slot_map_physical_size and it throws that ugly warning.
However, a simple initialization of "bytes" variable with 0 will fix it.
Signed-off-by: Ionut Gabriel Popescu <poyo_vl@yahoo.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch adds a safe check to ensure bg_free_bits_count doesn't exceed
bg_bits in a group descriptor. This is to avoid on disk corruption that was
seen recently.
debugfs: group <52803072>
Group Chain: 179 Parent Inode: 11 Generation: 2959379682
CRC32: 00000000 ECC: 0000
## Block# Total Used Free Contig Size
0 52803072 32256 4294965350 34202 18207 4032
......
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
dlm protocol 1.1. activates messages DLM_QUERY_REGION and DLM_QUERY_NODEINFO
that are a must for global heartbeat.
It also activates o2hb_global_heartbeat_active().
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
This patch adds a per region debugfs file that shows the elapsed time
since the time the o2hb timer was last armed.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
This patch creates debugfs directory for each o2hb region and creates
files to expose the region number and the per region live node bitmap.
This information will be useful in debugging cluster issues.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
This patch prints the bitmaps of live, quorum and failed regions. This
information will be useful in debugging cluster issues.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
In global heartbeat mode, we track the bitmap of regions that have seen
heartbeat timeouts. We fence if the number of such regions is greater than
or equal to half the number of quorum regions.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
o2hb allows online adding of regions. However, a newly added region is not
used in quorum calculations unless it has been added on all nodes. This patch
tracks a bitmap of such quorum regions.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
In global heartbeat mode, we have a upper limit for the number of active regions.
This patch adds the facility to track the number of active global heartbeat
regions and fails to start heartbeat if the number exceeds the maximum.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Currently we track a global livenode bitmap that keeps track of all nodes
that are heartbeating in all regions.
This patch adds the ability to track the livenode bitmap on a per region basis.
We will use this facility in a later patch to allow us to withstand the loss of
a minority number of regions.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
o2hb currently checks slots for configured nodes only. This patch makes
it check the slots for the live nodes too to take care of a race in which
a node is removed from the configuration but not from the live map.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Prints messages when the user adds or removes heartbeat regions in global
heartbeat mode. These messages are useful when debugging cluster related issues.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Adds new dlm message DLM_QUERY_NODEINFO that sends the attributes of all
registered nodes. This message is sent if the negotiated dlm protocol is
1.1 or higher. If the information of the joining node does not match
that of any existing nodes, the join domain request is rejected.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
In global heartbeat mode, the heartbeat is started by the user. This patch
prints an error if the user attempts to mount a volume without starting the
heartbeat.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Adds new dlm message DLM_QUERY_REGION that sends the names of all active
heartbeat regions. This message is only sent in the global heartbeat
mode. If the regions in the joining node do not fully match the ones in
the active nodes, the join domain request is rejected.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Export function in o2hb to get a list of heartbeat regions. It also adds an
upper limit to the length of the heartbeat region name.
o2hb_global_heartbeat_active() currently disables global heartbeat. It will
be enabled in a later patch after all the code is added.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Linus Torvalds