Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If this sysctl is set to non-zero and a process with CAP_MAC_ADMIN in
the root namespace has created an AppArmor policy namespace,
unprivileged processes will be able to change to a profile in the
newly created AppArmor policy namespace and, if the profile allows
CAP_MAC_ADMIN and appropriate file permissions, will be able to load
policy in the respective policy namespace.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Allow a profile to carry extra data that can be queried via userspace.
This provides a means to store extra data in a profile that a trusted
helper can extract and use from live policy.
Signed-off-by: William Hua <william.hua@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The aad macro can replace aad strings when it is not intended to. Switch
to a fn macro so it is only applied when intended.
Also at the same time cleanup audit_data initialization by putting
common boiler plate behind a macro, and dropping the gfp_t parameter
which will become useless.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Having ops be an integer that is an index into an op name table is
awkward and brittle. Every op change requires an edit for both the
op constant and a string in the table. Instead switch to using const
strings directly, eliminating the need for the table that needs to
be kept in sync.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Verify that profiles in a load set specify the same policy ns and
audit the name of the policy ns that policy is being loaded for.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Store loaded policy and allow introspecting it through apparmorfs. This
has several uses from debugging, policy validation, and policy checkpoint
and restore for containers.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Policy management will be expanded beyond traditional unconfined root.
This will require knowning the profile of the task doing the management
and the ns view.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Prepare for a tighter pairing of user namespaces and apparmor policy
namespaces, by making the ns to be viewed available.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Prepare for a tighter pairing of user namespaces and apparmor policy
namespaces, by making the ns to be viewed available and checking
that the user namespace level is the same as the policy ns level.
This strict pairing will be relaxed once true support of user namespaces
lands.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of testing whether a given dfa exists in every code path, have
a default null dfa that is used when loaded policy doesn't provide a
dfa.
This will let us get rid of special casing and avoid dereference bugs
when special casing is missed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When possible its better to name a learning profile after the missing
profile in question. This allows for both more informative names and
for profile reuse.
Signed-off-by: John Johansen <john.johansen@canonical.com>
prepare_ns() will need to be called from alternate views, and namespaces
will need to be created via different interfaces. So refactor and
allow specifying the view ns.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Policy namespaces will be diverging from profile management and
expanding so put it in its own file.
Signed-off-by: John Johansen <john.johansen@canonical.com>
the policy_lock parameter is a one way switch that prevents policy
from being further modified. Unfortunately some of the module parameters
can effectively modify policy by turning off enforcement.
split policy_admin_capable into a view check and a full admin check,
and update the admin check to test the policy_lock parameter.
Signed-off-by: John Johansen <john.johansen@canonical.com>
When finding a child profile via an rcu critical section, the profile
may be put and scheduled for deletion after the child is found but
before its refcount is incremented.
Protect against this by repeating the lookup if the profiles refcount
is 0 and is one its way to deletion.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Currently logging of a successful profile load only logs the basename
of the profile. This can result in confusion when a child profile has
the same name as the another profile in the set. Logging the hname
will ensure there is no confusion.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
currently only the profile that is causing the failure is logged. This
makes it more confusing than necessary about which profiles loaded
and which didn't. So make sure to log success and failure messages for
all profiles in the set being loaded.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
When set atomic replacement is used and the parent is updated before the
child, and the child did not exist in the old parent so there is no
direct replacement then the new child is incorrectly added to the old
parent. This results in the new parent not having the child(ren) that
it should and the old parent when being destroyed asserting the
following error.
AppArmor: policy_destroy: internal error, policy '<profile/name>' still
contains profiles
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Add basic interface files to access namespace and profile information.
The interface files are created when a profile is loaded and removed
when the profile or namespace is removed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Allow emulating the default profile behavior from boot, by allowing
loading of a profile in the unconfined state into a new NS.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
namespaces now completely use the unconfined profile to track the
refcount and rcu freeing cycle. So rework the code to simplify (track
everything through the profile path right up to the end), and move the
rcu_head from policy base to profile as the namespace no longer needs
it.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
ns->unconfined is being used read side without locking, nor rcu but is
being updated when a namespace is removed. This works for the root ns
which is never removed but has a race window and can cause failures when
children namespaces are removed.
Also ns and ns->unconfined have a circular refcounting dependency that
is problematic and must be broken. Currently this is done incorrectly
when the namespace is destroyed.
Fix this by forward referencing unconfined via the replacedby infrastructure
instead of directly updating the ns->unconfined pointer.
Remove the circular refcount dependency by making the ns and its unconfined
profile share the same refcount.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
remove the use of replaced by chaining and move to profile invalidation
and lookup to handle task replacement.
Replacement chaining can result in large chains of profiles being pinned
in memory when one profile in the chain is use. With implicit labeling
this will be even more of a problem, so move to a direct lookup method.
Signed-off-by: John Johansen <john.johansen@canonical.com>
previously profiles had to be loaded one at a time, which could result
in cases where a replacement of a set would partially succeed, and then fail
resulting in inconsistent policy.
Allow multiple profiles to replaced "atomically" so that the replacement
either succeeds or fails for the entire set of profiles.
Signed-off-by: John Johansen <john.johansen@canonical.com>
smatch reports
error: potential NULL dereference 'ns'.
this can not actually occur because it relies on aa_split_fqname setting
both ns_name and name as null but ns_name will actually always have a
value in this case.
so remove the unnecessary if (ns_name) conditional that is resulting
in the false positive further down.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Move the free_profile fn ahead of aa_alloc_profile so it can be used
in aa_alloc_profile without a forward declaration.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
The sid is not going to be a direct property of a profile anymore, instead
it will be directly related to the label, and the profile will pickup
a label back reference.
For null-profiles replace the use of sid with a per namespace unique
id.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <kees@ubuntu.com>
BugLink: http://bugs.launchpad.net/bugs/1056078
Profile replacement can cause long chains of profiles to build up when
the profile being replaced is pinned. When the pinned profile is finally
freed, it puts the reference to its replacement, which may in turn nest
another call to free_profile on the stack. Because this may happen for
each profile in the replacedby chain this can result in a recusion that
causes the stack to overflow.
Break this nesting by directly walking the chain of replacedby profiles
(ie. use iteration instead of recursion to free the list). This results
in at most 2 levels of free_profile being called, while freeing a
replacedby chain.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Ingo Molnar