In case there was an old root entry, make our new one
visible immediately after it was allocated.
Tested-by: ZhenHua Li <zhen-hual@hp.com>
Tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
QI needs to be available when we write the root entry into
hardware because flushes might be necessary after this.
Tested-by: ZhenHua Li <zhen-hual@hp.com>
Tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Give them a common prefix that can be grepped for and
improve the wording here and there.
Tested-by: ZhenHua Li <zhen-hual@hp.com>
Tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although the extended tables are theoretically a completely orthogonal
feature to PASID and anything else that *uses* the newly-available bits,
some of the early hardware has problems even when all we do is enable
them and use only the same bits that were in the old context tables.
For now, there's no motivation to support extended tables unless we're
going to use PASID support to do SVM. So just don't use them unless
PASID support is advertised too. Also add a command-line bailout just in
case later chips also have issues.
The equivalent problem for PASID support has already been fixed with the
upcoming VT-d spec update and commit bd00c606a ("iommu/vt-d: Change
PASID support to bit 40 of Extended Capability Register"), because the
problematic platforms use the old definition of the PASID-capable bit,
which is now marked as reserved and meaningless.
So with this change, we'll magically start using ECS again only when we
see the new hardware advertising "hey, we have PASID support and we
actually tested it this time" on bit 40.
The VT-d hardware architect has promised that we are not going to have
any reason to support ECS *without* PASID any time soon, and he'll make
sure he checks with us before changing that.
In the future, if hypothetical new features also use new bits in the
context tables and can be seen on implementations *without* PASID support,
we might need to add their feature bits to the ecs_enabled() macro.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
When we use 'intel_iommu=igfx_off' to disable translation for the
graphics, and when we discover that the BIOS has misconfigured the DMAR
setup for I/OAT, we use a special DUMMY_DEVICE_DOMAIN_INFO value in
dev->archdata.iommu to indicate that translation is disabled.
With passthrough mode, we were attempting to dereference that as a
normal pointer to a struct device_domain_info when setting up an
identity mapping for the affected device.
This fixes the problem by making device_to_iommu() explicitly check for
the special value and indicate that no IOMMU was found to handle the
devices in question.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org (which means you can pick up 18436afdc now too)
Pull intel iommu updates from David Woodhouse:
"This lays a little of the groundwork for upcoming Shared Virtual
Memory support — fixing some bogus #defines for capability bits and
adding the new ones, and starting to use the new wider page tables
where we can, in anticipation of actually filling in the new fields
therein.
It also allows graphics devices to be assigned to VM guests again.
This got broken in 3.17 by disallowing assignment of RMRR-afflicted
devices. Like USB, we do understand why there's an RMRR for graphics
devices — and unlike USB, it's actually sane. So we can make an
exception for graphics devices, just as we do USB controllers.
Finally, tone down the warning about the X2APIC_OPT_OUT bit, due to
persistent requests. X2APIC_OPT_OUT was added to the spec as a nasty
hack to allow broken BIOSes to forbid us from using X2APIC when they
do stupid and invasive things and would break if we did.
Someone noticed that since Windows doesn't have full IOMMU support for
DMA protection, setting the X2APIC_OPT_OUT bit made Windows avoid
initialising the IOMMU on the graphics unit altogether.
This means that it would be available for use in "driver mode", where
the IOMMU registers are made available through a BAR of the graphics
device and the graphics driver can do SVM all for itself.
So they started setting the X2APIC_OPT_OUT bit on *all* platforms with
SVM capabilities. And even the platforms which *might*, if the
planets had been aligned correctly, possibly have had SVM capability
but which in practice actually don't"
* git://git.infradead.org/intel-iommu:
iommu/vt-d: support extended root and context entries
iommu/vt-d: Add new extended capabilities from v2.3 VT-d specification
iommu/vt-d: Allow RMRR on graphics devices too
iommu/vt-d: Print x2apic opt out info instead of printing a warning
iommu/vt-d: kill bogus ecap_niotlb_iunits()
Not much this time, but the changes include:
* Moving domain allocation into the iommu drivers to prepare for
the introduction of default domains for devices
* Fixing the IO page-table code in the AMD IOMMU driver to
correctly encode large page sizes
* Extension of the PCI support in the ARM-SMMU driver
* Various fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FMxH
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"Not much this time, but the changes include:
- moving domain allocation into the iommu drivers to prepare for the
introduction of default domains for devices
- fixing the IO page-table code in the AMD IOMMU driver to correctly
encode large page sizes
- extension of the PCI support in the ARM-SMMU driver
- various fixes and cleanups"
* tag 'iommu-updates-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (34 commits)
iommu/amd: Correctly encode huge pages in iommu page tables
iommu/amd: Optimize amd_iommu_iova_to_phys for new fetch_pte interface
iommu/amd: Optimize alloc_new_range for new fetch_pte interface
iommu/amd: Optimize iommu_unmap_page for new fetch_pte interface
iommu/amd: Return the pte page-size in fetch_pte
iommu/amd: Add support for contiguous dma allocator
iommu/amd: Don't allocate with __GFP_ZERO in alloc_coherent
iommu/amd: Ignore BUS_NOTIFY_UNBOUND_DRIVER event
iommu/amd: Use BUS_NOTIFY_REMOVED_DEVICE
iommu/tegra: smmu: Compute PFN mask at runtime
iommu/tegra: gart: Set aperture at domain initialization time
iommu/tegra: Setup aperture
iommu: Remove domain_init and domain_free iommu_ops
iommu/fsl: Make use of domain_alloc and domain_free
iommu/rockchip: Make use of domain_alloc and domain_free
iommu/ipmmu-vmsa: Make use of domain_alloc and domain_free
iommu/shmobile: Make use of domain_alloc and domain_free
iommu/msm: Make use of domain_alloc and domain_free
iommu/tegra-gart: Make use of domain_alloc and domain_free
iommu/tegra-smmu: Make use of domain_alloc and domain_free
...
* device-properties:
device property: Introduce firmware node type for platform data
device property: Make it possible to use secondary firmware nodes
driver core: Implement device property accessors through fwnode ones
driver core: property: Update fwnode_property_read_string_array()
driver core: Add comments about returning array counts
ACPI: Introduce has_acpi_companion()
driver core / ACPI: Represent ACPI companions using fwnode_handle
Get rid of domain_init and domain_destroy and implement
domain_alloc/domain_free instead.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a new function iommu_context_addr() which takes care of the
differences and returns a pointer to a context entry which may be
in either format. The formats are binary compatible for all the old
fields anyway; the new one is just larger and some of the reserved
bits in the original 128 are now meaningful.
So far, nothing actually uses the new fields in the extended context
entry. Modulo hardware bugs with interpreting the new-style tables,
this should basically be a no-op.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Commit c875d2c1 ("iommu/vt-d: Exclude devices using RMRRs from IOMMU API
domains") prevents certain options for devices with RMRRs. This even
prevents those devices from getting a 1:1 mapping with 'iommu=pt',
because we don't have the code to handle *preserving* the RMRR regions
when moving the device between domains.
There's already an exclusion for USB devices, because we know the only
reason for RMRRs there is a misguided desire to keep legacy
keyboard/mouse emulation running in some theoretical OS which doesn't
have support for USB in its own right... but which *does* enable the
IOMMU.
Add an exclusion for graphics devices too, so that 'iommu=pt' works
there. We should be able to successfully assign graphics devices to
guests too, as long as the initial handling of stolen memory is
reconfigured appropriately. This has certainly worked in the past.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org
Device domains never span IOMMU hardware units, which allows the
domain ID space for each IOMMU to be an independent address space.
Therefore we can have multiple, independent domains, each with the
same domain->id, but attached to different hardware units. This is
also why we need to do a heavy-weight search for VM domains since
they can span multiple IOMMUs hardware units and we don't require a
single global ID to use for all hardware units.
Therefore, if we call iommu_detach_domain() across all active IOMMU
hardware units for a non-VM domain, the result is that we clear domain
IDs that are not associated with our domain, allowing them to be
re-allocated and causing apparent coherency issues when the device
cannot access IOVAs for the intended domain.
This bug was introduced in commit fb170fb4c5 ("iommu/vt-d: Introduce
helper functions to make code symmetric for readability"), but is
significantly exacerbated by the more recent commit 62c22167dd
("iommu/vt-d: Fix dmar_domain leak in iommu_attach_device") which calls
domain_exit() more frequently to resolve a domain leak.
Fixes: fb170fb4c5 ("iommu/vt-d: Introduce helper functions to make code symmetric for readability")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the ACPI companions of devices are represented by pointers
to struct fwnode_handle, it is not quite efficient to check whether
or not an ACPI companion of a device is present by evaluating the
ACPI_COMPANION() macro.
For this reason, introduce a special static inline routine for that,
has_acpi_companion(), and update the code to use it where applicable.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Systems may contain heterogeneous IOMMUs supporting differing minimum
page sizes, which may also not be common with the CPU page size.
Thus it is practical to have an explicit notion of IOVA granularity
to simplify handling of mapping and allocation constraints.
As an initial step, move the IOVA page granularity from an implicit
compile-time constant to a per-domain property so we can make use
of it in IOVA domain context at runtime. To keep the abstraction tidy,
extend the little API of inline iova_* helpers to parallel some of the
equivalent PAGE_* macros.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To share the IOVA allocator with other architectures, it needs to
accommodate more general aperture restrictions; move the lower limit
from a compile-time constant to a runtime domain property to allow
IOVA domains with different requirements to co-exist.
Also reword the slightly unclear description of alloc_iova since we're
touching it anyway.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to share the IOVA allocator with other architectures, break
the unnecssary dependency on the Intel IOMMU driver and move the
remaining IOVA internals to iova.c
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 1196c2f a domain is only destroyed in the
notifier path if it is hot-unplugged. This caused a
domain leakage in iommu_attach_device when a driver was
unbound from the device and bound to VFIO. In this case the
device is attached to a new domain and unlinked from the old
domain. At this point nothing points to the old domain
anymore and its memory is leaked.
Fix this by explicitly freeing the old domain in
iommu_attach_domain.
Fixes: 1196c2f (iommu/vt-d: Fix dmar_domain leak in iommu_attach_device)
Cc: stable@vger.kernel.org # v3.18
Tested-by: Jerry Hoemann <jerry.hoemann@hp.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There's an off-by-one bug in function __domain_mapping(), which may
trigger the BUG_ON(nr_pages < lvl_pages) when
(nr_pages + 1) & superpage_mask == 0
The issue was introduced by commit 9051aa0268 "intel-iommu: Combine
domain_pfn_mapping() and domain_sg_mapping()", which sets sg_res to
"nr_pages + 1" to avoid some of the 'sg_res==0' code paths.
It's safe to remove extra "+1" because sg_res is only used to calculate
page size now.
Reported-And-Tested-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: <stable@vger.kernel.org> # >= 3.0
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement required callback functions for intel-iommu driver
to support DMAR unit hotplug.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On Intel platforms, an IO Hub (PCI/PCIe host bridge) may contain DMAR
units, so we need to support DMAR hotplug when supporting PCI host
bridge hotplug on Intel platforms.
According to Section 8.8 "Remapping Hardware Unit Hot Plug" in "Intel
Virtualization Technology for Directed IO Architecture Specification
Rev 2.2", ACPI BIOS should implement ACPI _DSM method under the ACPI
object for the PCI host bridge to support DMAR hotplug.
This patch introduces interfaces to parse ACPI _DSM method for
DMAR unit hotplug. It also implements state machines for DMAR unit
hot-addition and hot-removal.
The PCI host bridge hotplug driver should call dmar_hotplug_hotplug()
before scanning PCI devices connected for hot-addition and after
destroying all PCI devices for hot-removal.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce functions to support dynamic IOMMU seq_id allocating and
releasing, which will be used to support DMAR hotplug.
Also rename IOMMU_UNITS_SUPPORTED as DMAR_UNITS_SUPPORTED.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce helper function dmar_walk_resources to walk resource entries
in DMAR table and ACPI buffer object returned by ACPI _DSM method
for IOMMU hot-plug.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function context_set_address_root() and set_root_value are setting new
address in a wrong way, and this patch is trying to fix this problem.
According to Intel Vt-d specs(Feb 2011, Revision 1.3), Chapter 9.1 and 9.2,
field ctp in root entry is using bits 12:63, field asr in context entry is
using bits 12:63.
To set these fields, the following functions are used:
static inline void context_set_address_root(struct context_entry *context,
unsigned long value);
and
static inline void set_root_value(struct root_entry *root, unsigned long value)
But they are using an invalid method to set these fields, in current code, only
a '|' operator is used to set it. This will not set the asr to the expected
value if it has an old value.
For example:
Before calling this function,
context->lo = 0x3456789012111;
value = 0x123456789abcef12;
After we call context_set_address_root(context, value), expected result is
context->lo == 0x123456789abce111;
But the actual result is:
context->lo == 0x1237577f9bbde111;
So we need to clear bits 12:63 before setting the new value, this will fix
this problem.
Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Mapping and unmapping are more often than not in the critical path.
map_sg allows IOMMU driver implementations to optimize the process
of mapping buffers into the IOMMU page tables.
Instead of mapping a buffer one page at a time and requiring potentially
expensive TLB operations for each page, this function allows the driver
to map all pages in one go and defer TLB maintenance until after all
pages have been mapped.
Additionally, the mapping operation would be faster in general since
clients does not have to keep calling map API over and over again for
each physically contiguous chunk of memory that needs to be mapped to a
virtually contiguous region.
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This makes sure any RMRR mappings stay in place when the
driver is unbound from the device.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Hoemann <jerry.hoemann@hp.com>
When the BUS_NOTIFY_DEL_DEVICE event is received the device
might still be attached to a driver. In this case the domain
can't be released as the mappings might still be in use.
Defer the domain removal in this case until we receivce the
BUS_NOTIFY_UNBOUND_DRIVER event.
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org # v3.15, v3.16
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The user of the IOMMU API domain expects to have full control of
the IOVA space for the domain. RMRRs are fundamentally incompatible
with that idea. We can neither map the RMRR into the IOMMU API
domain, nor can we guarantee that the device won't continue DMA with
the area described by the RMRR as part of the new domain. Therefore
we must prevent such devices from being used by the IOMMU API.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU units may dynamically attached to/detached from domains,
so we should scan all active IOMMU units when computing iommu_snooping
flag for a domain instead of only scanning IOMMU units associated
with the domain.
Also check snooping and superpage capabilities when hot-adding DMAR units.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce helper function domain_pfn_within_range() to simplify code
and improve readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce intel_unmap() to reduce duplicated code in intel_unmap_sg()
and intel_unmap_page().
Also let dma_pte_free_pagetable() to call dma_pte_clear_range() directly,
so caller only needs to call dma_pte_free_pagetable().
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Virtual machine domains are created by intel_iommu_domain_init() and
should be destroyed by intel_iommu_domain_destroy(). So avoid freeing
virtual machine domain data structure in free_dmar_iommu() when
doamin->iommu_count reaches zero, otherwise it may cause invalid
memory access because the IOMMU framework still holds references
to the domain structure.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Static identity and virtual machine domains may be cached in
iommu->domain_ids array after corresponding IOMMUs have been removed
from domain->iommu_bmp. So we should check domain->iommu_bmp before
decreasing domain->iommu_count in function free_dmar_iommu(), otherwise
it may cause free of inuse domain data structure.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check the same domain id is allocated for si_domain on each IOMMU,
otherwise the IOTLB flush for si_domain will fail.
Now the rules to allocate and manage domain id are:
1) For normal and static identity domains, domain id is allocated
when creating domain structure. And this id will be written into
context entry.
2) For virtual machine domain, a virtual id is allocated when creating
domain. And when binding virtual machine domain to an iommu, a real
domain id is allocated on demand and this domain id will be written
into context entry. So domain->id for virtual machine domain may be
different from the domain id written into context entry(used by
hardware).
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce domain_attach_iommu()/domain_detach_iommu() and refine
iommu_attach_domain()/iommu_detach_domain() to make code symmetric
and improve readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For virtual machine domains, domain->id is a virtual id, and the real
domain id written into context entry is dynamically allocated.
So use the real domain id instead of domain->id when flushing iotlbs
for virtual machine domains.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For virtual machine and static identity domains, there may be devices
from different PCI segments associated with the same domain.
So function iommu_support_dev_iotlb() should also match PCI segment
number (iommu unit) when searching for dev_iotlb capable devices.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This structure is read-only data and should never be modified.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Register our DRHD IOMMUs, cross link devices, and provide a base set
of attributes for the IOMMU. Note that IRQ remapping support parses
the DMAR table very early in boot, well before the iommu_class can
reasonably be setup, so our registration is split between
intel_iommu_init(), which occurs later, and alloc_iommu(), which
typically occurs much earlier, but may happen at any time later
with IOMMU hot-add support.
On a typical desktop system, this provides the following (pruned):
$ find /sys | grep dmar
/sys/devices/virtual/iommu/dmar0
/sys/devices/virtual/iommu/dmar0/devices
/sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0
/sys/devices/virtual/iommu/dmar0/intel-iommu
/sys/devices/virtual/iommu/dmar0/intel-iommu/cap
/sys/devices/virtual/iommu/dmar0/intel-iommu/ecap
/sys/devices/virtual/iommu/dmar0/intel-iommu/address
/sys/devices/virtual/iommu/dmar0/intel-iommu/version
/sys/devices/virtual/iommu/dmar1
/sys/devices/virtual/iommu/dmar1/devices
/sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0
...
/sys/devices/virtual/iommu/dmar1/intel-iommu
/sys/devices/virtual/iommu/dmar1/intel-iommu/cap
/sys/devices/virtual/iommu/dmar1/intel-iommu/ecap
/sys/devices/virtual/iommu/dmar1/intel-iommu/address
/sys/devices/virtual/iommu/dmar1/intel-iommu/version
/sys/class/iommu/dmar0
/sys/class/iommu/dmar1
(devices also link back to the dmar units)
This makes address, version, capabilities, and extended capabilities
available, just like printed on boot. I've tried not to duplicate
data that can be found in the DMAR table, with the exception of the
address, which provides an easy way to associate the sysfs device with
a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data
here, but the full DMAR table is already exposed under /sys/firmware/
and therefore already provides a way for userspace to learn such
details.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VT-d code currently makes use of pci_find_upstream_pcie_bridge() in
order to find the topology based alias of a device. This function has
a few problems. First, it doesn't check the entire alias path of the
device to the root bus, therefore if a PCIe device is masked upstream,
the wrong result is produced. Also, it's known to get confused and
give up when it crosses a bridge from a conventional PCI bus to a PCIe
bus that lacks a PCIe capability. The PCI-core provided DMA alias
support solves both of these problems and additionally adds support
for DMA function quirks allowing VT-d to work with devices like
Marvell and Ricoh with known broken requester IDs.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
