When we deleting a direntry from a directory, if it's the first in a block we
invalid it by setting inode to 0; otherwise, we merge the deleted one to the
prior and contiguous direntry. And we don't truncate directories.
There is a problem for the later case since inode is not set to 0.
This problem happens when the caller passes a file position as parameter to
ocfs2_dir_foreach_blk(). If the position happens to point to a stale(not
the first, deleted in betweens of ocfs2_dir_foreach_blk()s) direntry, we are
not able to recognize its staleness. So that we treat it as a live one wrongly.
The fix is to set inode to 0 in both cases indicating the direntry is stale.
This won't introduce additional IOs.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Memory allocated using kmem_cache_zalloc should be freed using
kmem_cache_free, not kfree.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,e,e1,e2;
@@
x = kmem_cache_zalloc(e1,e2)
... when != x = e
?-kfree(x)
+kmem_cache_free(e1,x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
When someone writes to an inode, readers accessing the same inode via
ocfs2_readpage() just busyloop trying to get ip_alloc_sem because
do_generic_file_read() looks up the page again and retries ->readpage()
when previous attempt failed with AOP_TRUNCATED_PAGE. When there are enough
readers, they can occupy all CPUs and in non-preempt kernel the system is
deadlocked because writer holding ip_alloc_sem is never run to release the
semaphore. Fix the problem by making reader block on ip_alloc_sem to break
the busy loop.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Fix a corruption that can happen when we have (two or more) outstanding
aio's to an overlapping unaligned region. Ext4
(e9e3bcecf4) and xfs recently had to fix
similar issues.
In our case what happens is that we can have an outstanding aio on a region
and if a write comes in with some bytes overlapping the original aio we may
decide to read that region into a page before continuing (typically because
of buffered-io fallback). Since we have no ordering guarantees with the
aio, we can read stale or bad data into the page and then write it back out.
If the i/o is page and block aligned, then we avoid this issue as there
won't be any need to read data from disk.
I took the same approach as Eric in the ext4 patch and introduced some
serialization of unaligned async direct i/o. I don't expect this to have an
effect on the most common cases of AIO. Unaligned aio will be slower
though, but that's far more acceptable than data corruption.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
ocfs2 implements its own llseek() to provide the SEEK_HOLE/SEEK_DATA
functionality.
SEEK_HOLE sets the file pointer to the start of either a hole or an unwritten
(preallocated) extent, that is greater than or equal to the supplied offset.
SEEK_DATA sets the file pointer to the start of an allocated extent (not
unwritten) that is greater than or equal to the supplied offset.
If the supplied offset is on a desired region, then the file pointer is set
to it. Offsets greater than or equal to the file size return -ENXIO.
Unwritten (preallocated) extents are considered holes because the file system
treats reads to such regions in the same way as it does to holes.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
This patch address two shortcomings in ocfs2_page_mkwrite():
1. Makes the function return better VM_FAULT_* errors.
2. It handles a error that is triggered when a page is dropped from the mapping
due to memory pressure. This patch locks the page to prevent that.
[Patch was cleaned up by Sunil Mushran.]
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The cluster up check only checks to see if the node is heartbeating or not.
If yes it continues assuming that the node is connected to all the nodes. But
if that is not the case, the cluster join aborts with a stack of errors that
are not easy to comprehend.
This patch adds the network connect check upfront and prints the nodes that
the node is not yet connected to, before aborting.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Patch adds function o2net_fill_node_map() to return the bitmap of nodes that
it is connected to. This bitmap is also accessible by the user via the debugfs
file, /sys/kernel/debug/o2net/connected_nodes.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The o2hb debugfs file, elapsed_time_in_ms, should return values only after the
timer is armed atleast once.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
In dlmlock_remote(), we wait for the resource to stop being active before
setting the inprogress flag. Active includes recovery, migration, etc.
The problem here is that if the resource was being recovered or migrated, the
new owner could very well be that node itself (and thus not a remote node).
This problem was observed in Oracle bug#12583620. The error messages observed
were as follows:
dlm_send_remote_lock_request:337 ERROR: Error -40 (ELOOP) when sending message 503 (key 0xd6d8c7) to node 2
dlmlock_remote:271 ERROR: dlm status = DLM_BADARGS
dlmlock:751 ERROR: dlm status = DLM_BADARGS
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The inflight reference count, in the lock resource, is taken to pin the resource
in memory. We take it when a new resource is created and release it after a
lock is attached to it. We do this to prevent the resource from getting purged
prematurely.
Earlier this reference count was being taken for locally mastered resources
only. This patch extends the same functionality for remotely mastered ones.
We are doing this because the same premature purging could occur for remotely
mastered resources if the remote node were to die before completion of the
create lock.
Fix for Oracle bug#12405575.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Currently if the heartbeat device is hard-ro, the o2hb thread keeps chugging
along and dumping errors along the way. The user needs to manually stop the
heartbeat.
The patch addresses this shortcoming by adding a limit to the number of times
the hb thread will iterate in an unsteady state. If the hb thread does not
ready steady state in that many interation, the start is aborted.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For filesystems that delay their end_io processing we should keep our
i_dio_count until the the processing is done. Enable this by moving
the inode_dio_done call to the end_io handler if one exist. Note that
the actual move to the workqueue for ext4 and XFS is not done in
this patch yet, but left to the filesystem maintainers. At least
for XFS it's not needed yet either as XFS has an internal equivalent
to i_dio_count.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Maintain i_dio_count for all filesystems, not just those using DIO_LOCKING.
This these filesystems to also protect truncate against direct I/O requests
by using common code. Right now the only non-DIO_LOCKING filesystem that
appears to do so is XFS, which uses an opencoded variant of the i_dio_count
scheme.
Behaviour doesn't change for filesystems never calling inode_dio_wait.
For ext4 behaviour changes when using the dioread_nonlock option, which
previously was missing any protection between truncate and direct I/O reads.
For ocfs2 that handcrafted i_dio_count manipulations are replaced with
the common code now enable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand. This means filesystem-specific locks to prevent
new dio referenes from appearing can be held. This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
i_alloc_sem is a rather special rw_semaphore. It's the last one that may
be released by a non-owner, and it's write side is always mirrored by
real exclusion. It's intended use it to wait for all pending direct I/O
requests to finish before starting a truncate.
Replace it with a hand-grown construct:
- exclusion for truncates is already guaranteed by i_mutex, so it can
simply fall way
- the reader side is replaced by an i_dio_count member in struct inode
that counts the number of pending direct I/O requests. Truncate can't
proceed as long as it's non-zero
- when i_dio_count reaches non-zero we wake up a pending truncate using
wake_up_bit on a new bit in i_flags
- new references to i_dio_count can't appear while we are waiting for
it to read zero because the direct I/O count always needs i_mutex
(or an equivalent like XFS's i_iolock) for starting a new operation.
This scheme is much simpler, and saves the space of a spinlock_t and a
struct list_head in struct inode (typically 160 bits on a non-debug 64-bit
system).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
combination of kern_path_parent() and lookup_create(). Does *not*
expose struct nameidata to caller. Syscalls converted to that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.
AFAICS, the only reasonably sane way to deal with that is
* new superblock flag; unless set, S_NOSEC is not going to be set.
* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.
It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Using __test_and_{set,clear}_bit_le() with ignoring its return value
can be replaced with __{set,clear}_bit_le().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Joel Becker <jlbec@evilplan.org>
The original code had a null derefence in the error handling.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
"new_phys_cpos" is always a valid pointer here.
ocfs2_probe_alloc_group() allocates "*new_phys_cpos".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
ocfs2 cannot currently mount a device that is readonly at the media
("hard readonly"). Fix the broken places.
see detail: http://oss.oracle.com/bugzilla/show_bug.cgi?id=1322
[ Description edited -- Joel ]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Reviewed-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
Ocfs2/move_extents: Validate moving goal after the adjustment.
Ocfs2/move_extents: Avoid doing division in extent moving.
though the goal_to_be_moved will be validated again in following moving, it's
still a good idea to validate it after adjustment at the very beginning, instead
of validating it before adjustment.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
It's not wise enough to do a 64bits division anywhere in kernside, replace it
with a decent helper or proper shifts.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits)
Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly.
ocfs2/dlm: Do not migrate resource to a node that is leaving the domain
ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG
Ocfs2/move_extents: Set several trivial constraints for threshold.
Ocfs2/move_extents: Let defrag handle partial extent moving.
Ocfs2/move_extents: move/defrag extents within a certain range.
Ocfs2/move_extents: helper to calculate the defraging length in one run.
Ocfs2/move_extents: move entire/partial extent.
Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode.
Ocfs2/move_extents: helper to probe a proper region to move in an alloc group.
Ocfs2/move_extents: helper to validate and adjust moving goal.
Ocfs2/move_extents: find the victim alloc group, where the given #blk fits.
Ocfs2/move_extents: defrag a range of extent.
Ocfs2/move_extents: move a range of extent.
Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving.
Ocfs2/move_extents: Add basic framework and source files for extent moving.
Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2.
Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c
Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl.
Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl.
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
xen: cleancache shim to Xen Transcendent Memory
ocfs2: add cleancache support
ext4: add cleancache support
btrfs: add cleancache support
ext3: add cleancache support
mm/fs: add hooks to support cleancache
mm: cleancache core ops functions and config
fs: add field to superblock to support cleancache
mm/fs: cleancache documentation
Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
This eighth patch of eight in this cleancache series "opts-in"
cleancache for ocfs2. Clustered filesystems must explicitly enable
cleancache by calling cleancache_init_shared_fs anytime an instance
of the filesystem is mounted. Ocfs2 is currently the only user of
the clustered filesystem interface but nevertheless, the cleancache
hooks in the VFS layer are sufficient for ocfs2 including the matching
cleancache_flush_fs hook which must be called on unmount.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v8: trivial merge conflict update]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Nitin Gupta <ngupta@vflare.org>
Oops, local-mounted of 'ocfs2_fops_no_plocks' is just missing the support
of unwritten_extents/punching-hole due to no func pointer was given correctly
to '.follocate' field.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
During dlm domain shutdown, o2dlm has to free all the lock resources. Ones that
have no locks and references are freed. Ones that have locks and/or references
are migrated to another node.
The first task in migration is finding a target. Currently we scan the lock
resource and find one node that either has a lock or a reference. This is not
very efficient in a parallel umount case as we might end up migrating the
lock resource to a node which itself may have to migrate it to a third node.
The patch scans the dlm->exit_domain_map to ensure the target node is not
leaving the domain. If no valid target node is found, o2dlm does not migrate
the resource but instead waits for the unlock and deref messages that will
allow it to free the resource.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
This patch adds a new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG and ups the dlm
protocol to 1.2.
o2dlm sends this new message in dlm_unregister_domain() to mark the beginning
of the exit domain. This message is sent to all nodes in the domain.
Currently o2dlm has no way of informing other nodes of its impending exit.
This information is useful as the other nodes could disregard the exiting
node in certain operations. For example, in resource migration. If two or
more nodes were umounting in parallel, it would be more efficient if o2dlm
were to choose a non-exiting node to be the new master node rather than an
exiting one.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
