Instead of doing fs_info->fs_root in need_async_flush, which may not be set
during recovery when mounting, just pass the root itself in, which makes more
sense as thats what btrfs_calc_reclaim_metadata_size takes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We do this check when we start the async reclaimer thread, might as well check
before we kick it off to save us some cycles. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We were doing trace_btrfs_release_reserved_extent() in pin_down_extent which
isn't quite right because we will go through and free that extent later when we
unpin, so it messes up apps that are accounting for the reservation space. We
were also unconditionally doing it in __btrfs_free_reserved_extent(), when we
only actually free the reservation instead of pinning the extent. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to track when we're triggering flushing from our reservation code and
what flushing is being done when we start flushing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can sometimes drop the reservation we had for our inode, so we need to remove
that amount from to_reserve so that our tracepoint reports a valid amount of
space.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pinned extents are an important metric to keep track of for enospc.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our enospc flushing sucks. It is born from a time where we were early
enospc'ing constantly because multiple threads would race in for the same
reservation and randomly starve other ones out. So I came up with this solution
to block any other reservations from happening while one guy tried to flush
stuff to satisfy his reservation. This gives us pretty good correctness, but
completely crap latency.
The solution I've come up with is ticketed reservations. Basically we try to
make our reservation, and if we can't we put a ticket on a list in order and
kick off an async flusher thread. This async flusher thread does the same old
flushing we always did, just asynchronously. As space is freed and added back
to the space_info it checks and sees if we have any tickets that need
satisfying, and adds space to the tickets and wakes up anything we've satisfied.
Once the flusher thread stops making progress it wakes up all the current
tickets and tells them to take a hike.
There is a priority list for things that can't flush, since the async flusher
could do anything we need to avoid deadlocks. These guys get priority for
having their reservation made, and will still do manual flushing themselves in
case the async flusher isn't running.
This patch gives us significantly better latencies. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I'm writing a tool to visualize the enospc system inside btrfs, I need this
tracepoint in order to keep track of the block groups in the system. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These were hidden behind enospc_debug, which isn't helpful as they indicate
actual bugs, unlike the rest of the enospc_debug stuff which is really debug
information. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We reserve space for the inode update when we first reserve space for writing to
a file. However there are lots of ways that we can use this reservation and not
have it for subsequent ordered extents. Previously we'd fall through and try to
reserve metadata bytes for this, then we'd just steal the full reservation from
the delalloc_block_rsv, and if that didn't have enough space we'd steal the full
reservation from the global reserve. The problem with this is we can easily
just return ENOSPC and fallback to updating the inode item directly. In the
worst case (assuming 4k nodesize) we'd steal 64kib from the global reserve if we
fall all the way through, however if we just fallback and update the inode
directly we'd only steal 4k * BTRFS_PATH_MAX in the worst case which is 32kib.
We would have also just added the extent item for the inode so we likely will
have already cow'ed down most of the way to the leaf containing the inode item,
so we are more often than not only need one or two nodesize's worth of
reservations. Given the reservation for the extent itself is also a worst case
we will likely already have space to cover the inode update.
This change will make us behave better in the theoretical worst case, and much
better in the case that we don't have our reservation and cannot reserve more
metadata. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few races in the metadata reservation stuff. First we add the bytes
to the block_rsv well after we've set the bit on the inode saying that we have
space for it and after we've reserved the bytes. So use the normal
btrfs_block_rsv_add helper for this case. Secondly we can flush delalloc
extents when we try to reserve space for our write, which means that we could
have used up the space for the inode and we wouldn't know because we only check
before the reservation. So instead make sure we are always reserving space for
the inode update, and then if we don't need it release those bytes afterward.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So btrfs_block_rsv_migrate just unconditionally calls block_rsv_migrate_bytes.
Not only this but it unconditionally changes the size of the block_rsv. This
isn't a bug strictly speaking, but it makes truncate block rsv's look funny
because every time we migrate bytes over its size grows, even though we only
want it to be a specific size. So collapse this into one function that takes an
update_size argument and make truncate and evict not update the size for
consistency sake. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For some reason we're adding bytes_readonly to the space info after we update
the space info with the block group info. This creates a tiny race where we
could over-reserve space because we haven't yet taken out the bytes_readonly
bit. Since we already know this information at the time we call
update_space_info, just pass it along so it can be updated all at once. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes part 2 from Chris Mason:
"This has one patch from Omar to bring iterate_shared back to btrfs.
We have a tree of work we queue up for directory items and it doesn't
lend itself well to shared access. While we're cleaning it up, Omar
has changed things to use an exclusive lock when there are delayed
items"
* 'for-linus-4.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix ->iterate_shared() by upgrading i_rwsem for delayed nodes
Pull btrfs fixes from Chris Mason:
"I have a two part pull this time because one of the patches Dave
Sterba collected needed to be against v4.7-rc2 or higher (we used
rc4). I try to make my for-linus-xx branch testable on top of the
last major so we can hand fixes to people on the list more easily, so
I've split this pull in two.
This first part has some fixes and two performance improvements that
we've been testing for some time.
Josef's two performance fixes are most notable. The transid tracking
patch makes a big improvement on pretty much every workload"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: Force stripesize to the value of sectorsize
btrfs: fix disk_i_size update bug when fallocate() fails
Btrfs: fix error handling in map_private_extent_buffer
Btrfs: fix error return code in btrfs_init_test_fs()
Btrfs: don't do nocow check unless we have to
btrfs: fix deadlock in delayed_ref_async_start
Btrfs: track transid for delayed ref flushing
Commit fe742fd4f9 ("Revert "btrfs: switch to ->iterate_shared()"")
backed out the conversion to ->iterate_shared() for Btrfs because the
delayed inode handling in btrfs_real_readdir() is racy. However, we can
still do readdir in parallel if there are no delayed nodes.
This is a temporary fix which upgrades the shared inode lock to an
exclusive lock only when we have delayed items until we come up with a
more complete solution. While we're here, rename the
btrfs_{get,put}_delayed_items functions to make it very clear that
they're just for readdir.
Tested with xfstests and by doing a parallel kernel build:
while make tinyconfig && make -j4 && git clean dqfx; do
:
done
along with a bunch of parallel finds in another shell:
while true; do
for ((i=0; i<4; i++)); do
find . >/dev/null &
done
wait
done
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs code currently assumes stripesize to be same as
sectorsize. However Btrfs-progs (until commit
df05c7ed455f519e6e15e46196392e4757257305) has been setting
btrfs_super_block->stripesize to a value of 4096.
This commit makes sure that the value of btrfs_super_block->stripesize
is a power of 2. Later, it unconditionally sets btrfs_root->stripesize
to sectorsize.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When doing truncate operation, btrfs_setsize() will first call
truncate_setsize() to set new inode->i_size, but if later
btrfs_truncate() fails, btrfs_setsize() will call
"i_size_write(inode, BTRFS_I(inode)->disk_i_size)" to reset the
inmemory inode size, now bug occurs. It's because for truncate
case btrfs_ordered_update_i_size() directly uses inode->i_size
to update BTRFS_I(inode)->disk_i_size, indeed we should use the
"offset" argument to update disk_i_size. Here is the call graph:
==>btrfs_truncate()
====>btrfs_truncate_inode_items()
======>btrfs_ordered_update_i_size(inode, last_size, NULL);
Here btrfs_ordered_update_i_size()'s offset argument is last_size.
And below test case can reveal this bug:
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=100
dev=$(losetup --show -f fs.img)
mkdir -p /mnt/mntpoint
mkfs.btrfs -f $dev
mount $dev /mnt/mntpoint
cd /mnt/mntpoint
echo "workdir is: /mnt/mntpoint"
blocksize=$((128 * 1024))
dd if=/dev/zero of=testfile bs=$blocksize count=1
sync
count=$((17*1024*1024*1024/blocksize))
echo "file size is:" $((count*blocksize))
for ((i = 1; i <= $count; i++)); do
i=$((i + 1))
dst_offset=$((blocksize * i))
xfs_io -f -c "reflink testfile 0 $dst_offset $blocksize"\
testfile > /dev/null
done
sync
truncate --size 0 testfile
ls -l testfile
du -sh testfile
exit
In this case, truncate operation will fail for enospc reason and
"du -sh testfile" returns value greater than 0, but testfile's
size is 0, we need to reflect correct inode->i_size.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
map_private_extent_buffer() can return -EINVAL in two different cases,
1. when the requested contents span two pages if nodesize is larger
than pagesize,
2. when it detects something insane.
The 2nd one used to be only a WARN_ON(1), and we decided to return a error
to callers, but we didn't fix up all its callers, which will be
addressed by this patch.
Without this, btrfs may end up with 'general protection', ie.
reading invalid memory.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Fix to return a negative error code from the kern_mount() error handling
case instead of 0(ret is set to 0 by register_filesystem), as done
elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before we write into prealloc/nocow space we have to make sure that there are no
references to the extents we are writing into, which means checking the extent
tree and csum tree in the case of nocow. So we don't want to do the nocow dance
unless we can't reserve data space, since it's a serious drag on performance.
With the following sequence
fallocate -l10737418240 /mnt/btrfs-test/file
cp --reflink /mnt/btrfs-test/file /mnt/btrfs-test/link
fio --name=randwrite --rw=randwrite --bs=4k --filename=/mnt/btrfs-test/file \
--end_fsync=1
we get the worst case scenario where we have to fall back on to doing the check
anyway.
Without this patch
lat (usec): min=5, max=111598, avg=27.65, stdev=124.51
write: io=10240MB, bw=126876KB/s, iops=31718, runt= 82646msec
With this patch
lat (usec): min=3, max=91210, avg=14.09, stdev=110.62
write: io=10240MB, bw=212753KB/s, iops=53188, runt= 49286msec
We get twice the throughput, half of the runtime, and half of the average
latency. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ PAGE_CACHE_ removal related fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
"Btrfs: track transid for delayed ref flushing" was deadlocking on
btrfs_attach_transaction because its not safe to call from the async
delayed ref start code. This commit brings back btrfs_join_transaction
instead and checks for a blocked commit.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Using the offwakecputime bpf script I noticed most of our time was spent waiting
on the delayed ref throttling. This is what is supposed to happen, but
sometimes the transaction can commit and then we're waiting for throttling that
doesn't matter anymore. So change this stuff to be a little smarter by tracking
the transid we were in when we initiated the throttling. If the transaction we
get is different then we can just bail out. This resulted in a 50% speedup in
my fs_mark test, and reduced the amount of time spent throttling by 60 seconds
over the entire run (which is about 30 minutes). Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"The most user visible change here is a fix for our recent superblock
validation checks that were causing problems on non-4k pagesized
systems"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: btrfs_check_super_valid: Allow 4096 as stripesize
btrfs: remove build fixup for qgroup_account_snapshot
btrfs: use new error message helper in qgroup_account_snapshot
btrfs: avoid blocking open_ctree from cleaner_kthread
Btrfs: don't BUG_ON() in btrfs_orphan_add
btrfs: account for non-CoW'd blocks in btrfs_abort_transaction
Btrfs: check if extent buffer is aligned to sectorsize
btrfs: Use correct format specifier
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence
restricting stripesize to be equal to sectorsize would cause super block
validation to return an error on architectures where PAGE_SIZE is not
equal to 4096.
Hence as a workaround, this commit allows stripesize to be set to 4096
bytes.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduced in 2c1984f244 ("btrfs: build fixup for
qgroup_account_snapshot") as temporary bisectability build fixup.
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes a problem introduced in commit 2f3165ecf1
"btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes".
open_ctree eventually calls btrfs_replay_log which in turn calls
btrfs_commit_super which tries to lock the cleaner_mutex, causing a
recursive mutex deadlock during mount.
Instead of playing whack-a-mole trying to keep up with all the
functions that may want to lock cleaner_mutex, put all the cleaner_mutex
lockers back where they were, and attack the problem more directly:
keep cleaner_kthread asleep until the filesystem is mounted.
When filesystems are mounted read-only and later remounted read-write,
open_ctree did not set fs_info->open and neither does anything else.
Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs
nor cleaner_kthread get confused by the common case of "/" filesystem
read-only mount followed by read-write remount.
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is just a screwup for developers, so change it to an ASSERT() so developers
notice when things go wrong and deal with the error appropriately if ASSERT()
isn't enabled. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The test for !trans->blocks_used in btrfs_abort_transaction is
insufficient to determine whether it's safe to drop the transaction
handle on the floor. btrfs_cow_block, informed by should_cow_block,
can return blocks that have already been CoW'd in the current
transaction. trans->blocks_used is only incremented for new block
allocations. If an operation overlaps the blocks in the current
transaction entirely and must abort the transaction, we'll happily
let it clean up the trans handle even though it may have modified
the blocks and will commit an incomplete operation.
In the long-term, I'd like to do closer tracking of when the fs
is actually modified so we can still recover as gracefully as possible,
but that approach will need some discussion. In the short term,
since this is the only code using trans->blocks_used, let's just
switch it to a bool indicating whether any blocks were used and set
it when should_cow_block returns false.
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer
via alloc_extent_buffer(). An unaligned eb can have more pages than it
should have, which ends up extent buffer's leak or some corrupted content
in extent buffer.
This adds a warning to let us quickly know what was happening.
Now that alloc_extent_buffer() no more returns NULL, this changes its
caller and callers of its caller to match with the new error
handling.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Component mirror_num of struct btrfsic_block is defined
as unsigned int. Use %u as format specifier.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"Has some fixes and some new self tests for btrfs. The self tests are
usually disabled in the .config file (unless you're doing btrfs dev
work), and this bunch is meant to find problems with the 64K page size
patches.
Jeff has a patch to help people see if they are using the hardware
assist crc32c module, which really helps us nail down problems when
people ask why crcs are using so much CPU.
Otherwise, it's small fixes"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system
Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize
Btrfs: self-tests: Use macros instead of constants and add missing newline
Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes
Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE
btrfs: advertise which crc32c implementation is being used at module load
Btrfs: add validadtion checks for chunk loading
Btrfs: add more validation checks for superblock
Btrfs: clear uptodate flags of pages in sys_array eb
Btrfs: self-tests: Support non-4k page size
Btrfs: Fix integer overflow when calculating bytes_per_bitmap
Btrfs: test_check_exists: Fix infinite loop when searching for free space entries
Btrfs: end transaction if we abort when creating uuid root
btrfs: Use __u64 in exported linux/btrfs.h.
In __test_eb_bitmaps(), we write random data to a bitmap. Then copy
the bitmap to another bitmap that resides inside an extent buffer.
Later we verify the values of corresponding bits in the bitmap and the
bitmap inside the extent buffer. However, extent_buffer_test_bit()
reads in byte granularity while test_bit() reads in unsigned long
granularity. Hence we end up comparing wrong bits on big-endian
systems such as ppc64. This commit fixes the issue by reading the
bitmap in byte granularity.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To test all possible sectorsizes, this commit adds a sectorsize
array. This commit executes the tests for all possible sectorsizes and
nodesizes.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On ppc64, PAGE_SIZE is 64k which is same as BTRFS_MAX_METADATA_BLOCKSIZE.
In such a scenario, we will never be able to have an extent buffer
containing more than one page. Hence in such cases this commit does not
execute the page straddling tests.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since several architectures support hardware-accelerated crc32c
calculation, it would be nice to confirm that btrfs is actually using it.
We can see an elevated use count for the module, but it doesn't actually
show who the users are. This patch simply prints the name of the driver
after successfully initializing the shash.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ added a helper and used in module load-time message ]
Signed-off-by: David Sterba <dsterba@suse.com>
To prevent fuzzed filesystem images from panic the whole system,
we need various validation checks to refuse to mount such an image
if btrfs finds any invalid value during loading chunks, including
both sys_array and regular chunks.
Note that these checks may not be sufficient to cover all corner cases,
feel free to add more checks.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds validation checks for super_total_bytes, super_bytes_used and
super_stripesize, super_num_devices.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We set uptodate flag to pages in the temporary sys_array eb,
but do not clear the flag after free eb. As the special
btree inode may still hold a reference on those pages, the
uptodate flag can remain alive in them.
If btrfs_super_chunk_root has been intentionally changed to the
offset of this sys_array eb, reading chunk_root will read content
of sys_array and it will skip our beautiful checks in
btree_readpage_end_io_hook() because of
"pages of eb are uptodate => eb is uptodate"
This adds the 'clear uptodate' part to force it to read from disk.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from Chris Mason:
"The important part of this pull is Filipe's set of fixes for btrfs
device replacement. Filipe fixed a few issues seen on the list and a
number he found on his own"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent
Btrfs: fix race between device replace and read repair
Btrfs: fix race between device replace and discard
Btrfs: fix race between device replace and chunk allocation
Btrfs: fix race setting block group back to RW mode during device replace
Btrfs: fix unprotected assignment of the left cursor for device replace
Btrfs: fix race setting block group readonly during device replace
Btrfs: fix race between device replace and block group removal
Btrfs: fix race between readahead and device replace/removal
When dealing with inline extents, btrfs_get_extent will incorrectly try
to insert a duplicate extent_map. The dup hits -EEXIST from
add_extent_map, but then we try to merge with the existing one and end
up trying to insert a zero length extent_map.
This actually works most of the time, except when there are extent maps
past the end of the inline extent. rocksdb will trigger this sometimes
because it preallocates an extent and then truncates down.
Josef made a script to trigger with xfs_io:
#!/bin/bash
xfs_io -f -c "pwrite 0 1000" inline
xfs_io -c "falloc -k 4k 1M" inline
xfs_io -c "pread 0 1000" -c "fadvise -d 0 1000" -c "pread 0 1000" inline
xfs_io -c "fadvise -d 0 1000" inline
cat inline
You'll get EIOs trying to read inline after this because add_extent_map
is returning EEXIST
Signed-off-by: Chris Mason <clm@fb.com>
self-tests code assumes 4k as the sectorsize and nodesize. This commit
fix hardcoded 4K. Enables the self-tests code to be executed on non-4k
page sized systems (e.g. ppc64).
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On ppc64, bytes_per_bitmap will be (65536*8*65536). Hence append UL to
fix integer overflow.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On a ppc64 machine using 64K as the block size, assume that the RB
tree at btrfs_free_space_ctl->free_space_offset contains following
two entries:
1. A bitmap entry having an offset value of 0 and having the bits
corresponding to the address range [128M+512K, 128M+768K] set.
2. An extent entry corresponding to the address range
[128M-256K, 128M-128K]
In such a scenario, test_check_exists() invoked for checking the
existence of address range [128M+768K, 256M] can lead to an
infinite loop as explained below:
- Checking for the extent entry fails.
- Checking for a bitmap entry results in the free space info in
range [128M+512K, 128M+768K] beng returned.
- rb_prev(info) returns NULL because the bitmap entry starting from
offset 0 comes first in the RB tree.
- current_node = bitmap node.
- while (current_node)
tmp = rb_next(bitmap_node);/*tmp is extent based free space entry*/
Since extent based free space entry's last address is smaller
than the address being searched for (i.e. 128M+768K) we
incorrectly again obtain the extent node as the "next right node"
of the RB tree and thus end up looping infinitely.
This patch fixes the issue by checking the "tmp" variable which point
to the most recently searched free space node.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We still need to call btrfs_end_transaction if we call btrfs_abort_transaction,
otherwise we hang and make me super grumpy. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
