ip_vs_lblc_table and ip_vs_lblcr_table, and code that uses them
are unnecessary when CONFIG_SYSCTL is undefined.
Signed-off-by: Simon Horman <horms@verge.net.au>
Much of ip_vs_leave() is unnecessary if CONFIG_SYSCTL is undefined.
I tried an approach of breaking the now #ifdef'ed portions out
into a separate function. However this appeared to grow the
compiled code on x86_64 by about 200 bytes in the case where
CONFIG_SYSCTL is defined. So I have gone with the simpler though
less elegant #ifdef'ed solution for now.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_lblc{r}_expiration in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_expire_quiescent_template in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_expire_nodest_conn in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_sync_ver in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_sync_threshold in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_nat_icmp_send in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_snat_reroute in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
Rename ip_vs_new_estimator to ip_vs_start_estimator
and ip_vs_kill_estimator to ip_vs_stop_estimator to better
match their logic.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Move the estimator reading from estimation_timer to user
context. ip_vs_read_estimator() will be used to decode the rate
values. As the decoded rates are not set by estimation timer
there is no need to reset them in ip_vs_zero_stats.
There is no need ip_vs_new_estimator() to encode stats
to rates, if the destination is in trash both the stats and the
rates are inactive.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Currently, the new percpu counters are not zeroed and
the zero commands do not work as expected, we still show the old
sum of percpu values. OTOH, we can not reset the percpu counters
from user context without causing the incrementing to use old
and bogus values.
So, as Eric Dumazet suggested fix that by moving all overhead
to stats reading in user context. Do not introduce overhead in
timer context (estimator) and incrementing (packet handling in
softirqs).
The new ustats0 field holds the zero point for all
counter values, the rates always use 0 as base value as before.
When showing the values to user space just give the difference
between counters and the base values. The only drawback is that
percpu stats are not zeroed, they are accessible only from /proc
and are new interface, so it should not be a compatibility problem
as long as the sum stats are correct after zeroing.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
The global tot_stats contains cpustats field just like the
stats for dest and svc, so better use it to simplify the usage
in estimation_timer. As tot_stats is registered as estimator
we can remove the special ip_vs_read_cpu_stats call for
tot_stats. Fix ip_vs_read_cpu_stats to be called under
stats lock because it is still used as synchronization between
estimation timer and user context (the stats readers).
Also, make sure ip_vs_stats_percpu_show reads properly
the u64 stats from user context.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
The semantic patch that makes this output is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_read_cpu_stats is called only from timer, so
no need for _bh locks.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Restore the previous behaviour to lookup for fwmark
service only when fwmark is non-null. This saves only CPU.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Message in log because sysctl table was not empty at netns exit
WARNING: at net/sysctl_net.c:84 sysctl_net_exit+0x2a/0x2c()
Instrumenting showed that the nf_conntrack_timestamp was the entry
that was being created but not cleared.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
As Stephen correctly points out, we need to return -ENOENT in
xt_find_match()/xt_find_target() after the patch "netfilter: x_tables:
misuse of try_then_request_module" in order to properly indicate
a non-existant module to the caller.
Signed-off-by: Patrick McHardy <kaber@trash.net>
I intend to turn struct flowi into a union of AF specific flowi
structs. There will be a common structure that each variant includes
first, much like struct sock_common.
This is the first step to move in that direction.
Signed-off-by: David S. Miller <davem@davemloft.net>
The idea here is this minimizes the number of places one has to edit
in order to make changes to how flows are defined and used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Since xt_find_match() returns ERR_PTR(xx) on error not NULL,
the macro try_then_request_module won't work correctly here.
The macro expects its first argument will be zero if condition
fails. But ERR_PTR(-ENOENT) is not zero.
The correct solution is to propagate the error value
back.
Found by inspection, and compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
net/netfilter/ipset/ip_set_core.c:615: warning: ‘clash’ may be used uninitialized in this function
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Like many other places, we have to check that the array index is
within allowed limits, or otherwise, a kernel oops and other nastiness
can ensue when we access memory beyond the end of the array.
[ 5954.115381] BUG: unable to handle kernel paging request at 0000004000000000
[ 5954.120014] IP: __find_logger+0x6f/0xa0
[ 5954.123979] nf_log_bind_pf+0x2b/0x70
[ 5954.123979] nfulnl_recv_config+0xc0/0x4a0 [nfnetlink_log]
[ 5954.123979] nfnetlink_rcv_msg+0x12c/0x1b0 [nfnetlink]
...
The problem goes back to v2.6.30-rc1~1372~1342~31 where nf_log_bind
was decoupled from nf_log_register.
Reported-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>,
via irc.freenode.net/#netfilter
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Fix dst_lock usage in __ip_vs_update_dest. We need
_bh locking because destination is updated in user context.
Can cause lockups on frequent destination updates.
Problem reported by Simon Kirby. Bug was introduced
in 2.6.37 from the "ipvs: changes for local real server"
change.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch fixes the out of sync scenarios while in SYN_RECV state.
Quoting Jozsef, what it happens if we are out of sync if the
following:
> > b. conntrack entry is outdated, new SYN received
> > - (b1) we ignore it but save the initialization data from it
> > - (b2) when the reply SYN/ACK receives and it matches the saved data,
> > we pick up the new connection
This is what it should happen if we are in SYN_RECV state. Initially,
the SYN packet hits b1, thus we save data from it. But the SYN/ACK
packet is considered a retransmission given that we're in SYN_RECV
state. Therefore, we never hit b2 and we don't get in sync. To fix
this, we ignore SYN/ACK if we are in SYN_RECV. If the previous packet
was a SYN, then we enter the ignore case that get us in sync.
This patch helps a lot to conntrackd in stress scenarios (assumming a
client that generates lots of small TCP connections). During the failover,
consider that the new primary has injected one outdated flow in SYN_RECV
state (this is likely to happen if the conntrack event rate is high
because the backup will be a bit delayed from the primary). With the
current code, if the client starts a new fresh connection that matches
the tuple, the SYN packet will be ignored without updating the state
tracking, and the SYN+ACK in reply will blocked as it will not pass
checkings III or IV (since all state tracking in the original direction
is not initialized because of the SYN packet was ignored and the ignore
case that get us in sync is not applied).
I posted a couple of patches before this one. Changli Gao spotted
a simpler way to fix this problem. This patch implements his idea.
Cc: Changli Gao <xiaosuo@gmail.com>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
lc and wlc use the same formula, but lblc and lblcr use another one. There
is no reason for using two different formulas for the lc variants.
The formula used by lc is used by all the lc variants in this patch.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Wensong Zhang <wensong@linux-vs.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
Assigning a socket in timewait state to skb->sk can trigger
kernel oops, e.g. in nfnetlink_log, which does:
if (skb->sk) {
read_lock_bh(&skb->sk->sk_callback_lock);
if (skb->sk->sk_socket && skb->sk->sk_socket->file) ...
in the timewait case, accessing sk->sk_callback_lock and sk->sk_socket
is invalid.
Either all of these spots will need to add a test for sk->sk_state != TCP_TIME_WAIT,
or xt_TPROXY must not assign a timewait socket to skb->sk.
This does the latter.
If a TW socket is found, assign the tproxy nfmark, but skip the skb->sk assignment,
thus mimicking behaviour of a '-m socket .. -j MARK/ACCEPT' re-routing rule.
The 'SYN to TW socket' case is left unchanged -- we try to redirect to the
listener socket.
Cc: Balazs Scheidler <bazsi@balabit.hu>
Cc: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Florian Westphal <fwestphal@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
When IP_VS schedulers do not find a destination, they output a terse
"WLC: no destination available" message through kernel syslog, which I
can not only make sense of because syslog puts them in a logfile
together with keepalived checker results.
This patch makes the output a bit more informative, by telling you which
virtual service failed to find a destination.
Example output:
kernel: [1539214.552233] IPVS: wlc: TCP 192.168.8.30:22 - no destination available
kernel: [1539299.674418] IPVS: wlc: FWM 22 0x00000016 - no destination available
I have tested the code for IPv4 and FWM services, as you can see from
the example; I do not have an IPv6 setup to test the third code path
with.
To avoid code duplication, I put a new function ip_vs_scheduler_err()
into ip_vs_sched.c, and use that from the schedulers instead of calling
IP_VS_ERR_RL directly.
Signed-off-by: Patrick Schaaf <netdev@bof.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
Remove code that should not be called anymore.
Now when ip_vs_out handles replies for local clients at
LOCAL_IN hook we do not need to call conn_out_get and
handle_response_icmp from ip_vs_in_icmp* because such
lookups were already performed for the ICMP packet and no
connection was found.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Fix get_curr_sync_buff to keep buffer for 2 seconds
as intended, not just for the current jiffie. By this way
we will sync more connection structures with single packet.
Signed-off-by: Tinggong Wang <wangtinggong@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
As noticed by Eric, nf_iterate doesn't use RCU correctly by
accessing the prev pointer of a RCU protected list element when
a verdict of NF_REPEAT is issued.
Fix by jumping backwards to the hook invocation directly instead
of loading the previous list element before continuing the list
iteration.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This reverts commit 44bd4de9c2.
I have to revert the early loop termination in connlimit since it generates
problems when an iptables statement does not use -m state --state NEW before
the connlimit match extension.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The patch below introduces an early termination of the loop that is
counting matches. It terminates once the counter has exceeded the
threshold provided by the user. There's no point in continuing the loop
afterwards and looking at other entries.
It plays together with the following code further below:
return (connections > info->limit) ^ info->inverse;
where connections is the result of the counted connection, which in turn
is the matches variable in the loop. So once
-> matches = info->limit + 1
alias -> matches > info->limit
alias -> matches > threshold
we can terminate the loop.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
When SYSCTL and PROC_FS and NETFILTER_NETLINK are not enabled:
net/built-in.o: In function `try_to_load_type':
ip_set_core.c:(.text+0x3ab49): undefined reference to `nfnl_unlock'
ip_set_core.c:(.text+0x3ab4e): undefined reference to `nfnl_lock'
...
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The TCP tracking code has a special case that allows to return
NF_REPEAT if we receive a new SYN packet while in TIME_WAIT state.
In this situation, the TCP tracking code destroys the existing
conntrack to start a new clean session.
[DESTROY] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=38925 dport=8000 src=192.168.1.2 dst=192.168.1.100 sport=8000 dport=38925 [ASSURED]
[NEW] tcp 6 120 SYN_SENT src=192.168.0.2 dst=192.168.1.2 sport=38925 dport=8000 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=8000 dport=38925
However, this is a problem for the iptables' CT target event filtering
which will not work in this case since the conntrack template will not
be there for the new session. To fix this, we reassign the conntrack
template to the packet if we return NF_REPEAT.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
'!' has higher precedence than '&'. IP_VS_STATE_MASTER is 0x1 so
the original code is equivelent to if (!ipvs->sync_state) ...
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Use sctp_app_lock instead of tcp_app_lock in the SCTP protocol module.
This appears to be a typo introduced by the netns changes.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Add a new 'devgroup' match to match on the device group of the
incoming and outgoing network device of a packet.
Signed-off-by: Patrick McHardy <kaber@trash.net>
When a message carries multiple commands and one of them triggers
an error, we have to report to the userspace which one was that.
The line number of the command plays this role and there's an attribute
reserved in the header part of the message to be filled out with the error
line number. In order not to modify the original message received from
the userspace, we construct a new, complete netlink error message and
modifies the attribute there, then send it.
Netlink is notified not to send its ACK/error message.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu
Signed-off-by: Patrick McHardy <kaber@trash.net>
Add a dummy ip_set_get_ip6_port function that unconditionally
returns false for CONFIG_IPV6=n and convert the real function
to ipv6_skip_exthdr() to avoid pulling in the ip6_tables module
when loading ipset.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Don't fall through in the switch statement, otherwise IPv4 headers
are incorrectly parsed again as IPv6 and the return value will always
be 'false'.
Signed-off-by: Patrick McHardy <kaber@trash.net>
ip_vs_sync_cleanup() may be called from ip_vs_init() on error
and thus needs to be accesible from section __init
Reporte-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This is a rather naieve approach to allowing PVS to compile with
CONFIG_SYSCTL disabled. I am working on a more comprehensive patch which
will remove compilation of all sysctl-related IPVS code when CONFIG_SYSCTL
is disabled.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
net/netfilter/nf_conntrack_netlink.c: In function 'ctnetlink_parse_tuple':
net/netfilter/nf_conntrack_netlink.c:832:11: warning: comparison between 'enum ctattr_tuple' and 'enum ctattr_type'
Use ctattr_type for the 'type' parameter since that's the type of all attributes
passed to this function.
Signed-off-by: Patrick McHardy <kaber@trash.net>
None of the set types need uaccess.h since this is handled centrally
in ip_set_core. Most set types additionally don't need bitops.h and
spinlock.h since they use neither. tcp.h is only needed by those
using before(), udp.h is not needed at all.
Signed-off-by: Patrick McHardy <kaber@trash.net>
For the following rule:
iptables -I PREROUTING -t raw -j CT --ctevents assured
The event delivered looks like the following:
[UPDATE] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]
Note that the TCP protocol state is not included. For that reason
the CT event filtering is not very useful for conntrackd.
To resolve this issue, instead of conditionally setting the CT events
bits based on the ctmask, we always set them and perform the filtering
in the late stage, just before the delivery.
Thus, the event delivered looks like the following:
[UPDATE] tcp 6 432000 ESTABLISHED src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The patch adds the combined module of the "SET" target and "set" match
to netfilter. Both the previous and the current revisions are supported.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the list:set type support in two flavours:
without and with timeout. The sets has two sides: for the userspace,
they store the names of other (non list:set type of) sets: one can add,
delete and test set names. For the kernel, it forms an ordered union of
the member sets: the members sets are tried in order when elements are
added, deleted and tested and the process stops at the first success.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:net,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 network address/prefix and protocol/port
pairs.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are one dimensional: IPv4/IPv6 network address/prefixes.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port,net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
network address/prefix triples. The different prefixes are searched/matched
from the longest prefix to the shortes one (most specific to least).
In other words the processing time linearly grows with the number of
different prefixes in the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port,ip type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
address triples.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 address and protocol/port pairs. The port
is interpeted for TCP, UPD, ICMP and ICMPv6 (at the latters as type/code
of course).
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip type support in four flavours:
for IPv4 or IPv6, both without and with timeout support.
All the hash types are based on the "array hash" or ahash structure
and functions as a good compromise between minimal memory footprint
and speed. The hashing uses arrays to resolve clashes. The hash table
is resized (doubled) when searching becomes too long. Resizing can be
triggered by userspace add commands only and those are serialized by
the nfnl mutex. During resizing the set is read-locked, so the only
possible concurrent operations are the kernel side readers. Those are
protected by RCU locking.
Because of the four flavours and the other hash types, the functions
are implemented in general forms in the ip_set_ahash.h header file
and the real functions are generated before compiling by macro expansion.
Thus the dereferencing of low-level functions and void pointer arguments
could be avoided: the low-level functions are inlined, the function
arguments are pointers of type-specific structures.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:port type in two flavours, without
and with timeout support to store TCP/UDP ports from a range.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:ip,mac set type in two flavours,
without and with timeout support. In this kind of set one can store
IPv4 address and (source) MAC address pairs. The type supports elements
added without the MAC part filled out: when the first matching from kernel
happens, the MAC part is automatically filled out. The timing out of the
elements stars when an element is complete in the IP,MAC pair.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:ip set type in two flavours, without
and with timeout support. In this kind of set one can store IPv4
addresses (or network addresses) from a given range.
In order not to waste memory, the timeout version does not rely on
the kernel timer for every element to be timed out but on garbage
collection. All set types use this mechanism.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The patch adds the IP set core support to the kernel.
The IP set core implements a netlink (nfnetlink) based protocol by which
one can create, destroy, flush, rename, swap, list, save, restore sets,
and add, delete, test elements from userspace. For simplicity (and backward
compatibilty and for not to force ip(6)tables to be linked with a netlink
library) reasons a small getsockopt-based protocol is also kept in order
to communicate with the ip(6)tables match and target.
The netlink protocol passes all u16, etc values in network order with
NLA_F_NET_BYTEORDER flag. The protocol enforces the proper use of the
NLA_F_NESTED and NLA_F_NET_BYTEORDER flags.
For other kernel subsystems (netfilter match and target) the API contains
the functions to add, delete and test elements in sets and the required calls
to get/put refereces to the sets before those operations can be performed.
The set types (which are implemented in independent modules) are stored
in a simple RCU protected list. A set type may have variants: for example
without timeout or with timeout support, for IPv4 or for IPv6. The sets
(i.e. the pointers to the sets) are stored in an array. The sets are
identified by their index in the array, which makes possible easy and
fast swapping of sets. The array is protected indirectly by the nfnl
mutex from nfnetlink. The content of the sets are protected by the rwlock
of the set.
There are functional differences between the add/del/test functions
for the kernel and userspace:
- kernel add/del/test: works on the current packet (i.e. one element)
- kernel test: may trigger an "add" operation in order to fill
out unspecified parts of the element from the packet (like MAC address)
- userspace add/del: works on the netlink message and thus possibly
on multiple elements from the IPSET_ATTR_ADT container attribute.
- userspace add: may trigger resizing of a set
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
xt_connlimit normally records the "original" tuples in a hashlist
(such as "1.2.3.4 -> 5.6.7.8"), and looks in this list for iph->daddr
when counting.
When the user however uses DNAT in PREROUTING, looking for
iph->daddr -- which is now 192.168.9.10 -- will not match. Thus in
daddr mode, we need to record the reverse direction tuple
("192.168.9.10 -> 1.2.3.4") instead. In the reverse tuple, the dst
addr is on the src side, which is convenient, as count_them still uses
&conn->tuple.src.u3.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
The newly created table was not used when register sysctl for a new namespace.
I.e. sysctl doesn't work for other than root namespace (init_net)
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
iprange_ipv6_sub was substracting 2 unsigned ints and then casting
the result to int to find out whether they are lt, eq or gt each
other, this doesn't work if the full 32 bits of each part
can be used in IPv6 addresses. Patch should remedy that without
significant performance penalties. Also number of ntohl
calls can be reduced this way (Jozsef Kadlecsik).
Signed-off-by: Thomas Jacob <jacob@internet24.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
In 13ee6ac netfilter: fix race in conntrack between dump_table and
destroy, we recovered spinlocks to protect the dump of the conntrack
table according to reports from Stephen and acknowledgments on the
issue from Eric.
In that patch, the refcount bump that allows to keep a reference
to the current ct object was removed. However, we still decrement
the refcount for that object in the output path of
ctnetlink_dump_table():
if (last)
nf_ct_put(last)
Cc: Stephen Hemminger <stephen.hemminger@vyatta.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The recent netns changes omitted to change
sock_create_kernel() to __sock_create() in ip_vs_sync.c
The effect of this is that the interface will be selected in the
root-namespace, from my point of view it's a major bug.
Reported-by: Hans Schillstrom <hans@schillstrom.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Fix compiler warnings when no transport protocol load balancing support
is configured.
[horms@verge.net.au: removed suprious __ip_vs_cleanup() clean-up hunk]
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
When no tstamp extension exists, ct_delta_time() returns -1, which is
then assigned to an u64 and tested for negative values to decide
whether to display the lifetime. This obviously doesn't work, use
a s64 and merge the two minor functions into one.
Signed-off-by: Patrick McHardy <kaber@trash.net>
This adds destination address-based selection. The old "inverse"
member is overloaded (memory-wise) with a new "flags" variable,
similar to how J.Park did it with xt_string rev 1. Since revision 0
userspace only sets flag 0x1, no great changes are made to explicitly
test for different revisions.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
This patch adds flow-based timestamping for conntracks. This
conntrack extension is disabled by default. Basically, we use
two 64-bits variables to store the creation timestamp once the
conntrack has been confirmed and the other to store the deletion
time. This extension is disabled by default, to enable it, you
have to:
echo 1 > /proc/sys/net/netfilter/nf_conntrack_timestamp
This patch allows to save memory for user-space flow-based
loogers such as ulogd2. In short, ulogd2 does not need to
keep a hashtable with the conntrack in user-space to know
when they were created and destroyed, instead we use the
kernel timestamp. If we want to have a sane IPFIX implementation
in user-space, this nanosecs resolution timestamps are also
useful. Other custom user-space applications can benefit from
this via libnetfilter_conntrack.
This patch modifies the /proc output to display the delta time
in seconds since the flow start. You can also obtain the
flow-start date by means of the conntrack-tools.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Adding support for SNMP broadcast connection tracking. The SNMP
broadcast requests are now paired with the SNMP responses.
Thus allowing using SNMP broadcasts with firewall enabled.
Please refer to the following conversation:
http://marc.info/?l=netfilter-devel&m=125992205006600&w=2
Patrick McHardy wrote:
> > The best solution would be to add generic broadcast tracking, the
> > use of expectations for this is a bit of abuse.
> > The second best choice I guess would be to move the help() function
> > to a shared module and generalize it so it can be used for both.
This patch implements the "second best choice".
Since the netbios-ns conntrack module uses the same helper
functionality as the snmp, only one helper function is added
for both snmp and netbios-ns modules into the new object -
nf_conntrack_broadcast.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
If an skb is to be NF_QUEUE'd, but no program has opened the queue, the
packet is dropped.
This adds a v2 target revision of xt_NFQUEUE that allows packets to
continue through the ruleset instead.
Because the actual queueing happens outside of the target context, the
'bypass' flag has to be communicated back to the netfilter core.
Unfortunately the only choice to do this without adding a new function
argument is to use the target function return value (i.e. the verdict).
In the NF_QUEUE case, the upper 16bit already contain the queue number
to use. The previous patch reduced NF_VERDICT_MASK to 0xff, i.e.
we now have extra room for a new flag.
If a hook issued a NF_QUEUE verdict, then the netfilter core will
continue packet processing if the queueing hook
returns -ESRCH (== "this queue does not exist") and the new
NF_VERDICT_FLAG_QUEUE_BYPASS flag is set in the verdict value.
Note: If the queue exists, but userspace does not consume packets fast
enough, the skb will still be dropped.
Signed-off-by: Florian Westphal <fwestphal@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
NF_VERDICT_MASK is currently 0xffff. This is because the upper
16 bits are used to store errno (for NF_DROP) or the queue number
(NF_QUEUE verdict).
As there are up to 0xffff different queues available, there is no more
room to store additional flags.
At the moment there are only 6 different verdicts, i.e. we can reduce
NF_VERDICT_MASK to 0xff to allow storing additional flags in the 0xff00 space.
NF_VERDICT_BITS would then be reduced to 8, but because the value is
exported to userspace, this might cause breakage; e.g.:
e.g. 'queuenr = (1 << NF_VERDICT_BITS) | NF_QUEUE' would now break.
Thus, remove NF_VERDICT_BITS usage in the kernel and move the old value
to the 'userspace compat' section.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Move free responsibility from nf_queue to caller.
This enables more flexible error handling; we can now accept the skb
instead of freeing it.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
instead of returning -1 on error, return an error number to allow the
caller to handle some errors differently.
ECANCELED is used to indicate that the hook is going away and should be
ignored.
A followup patch will introduce more 'ignore this hook' conditions,
(depending on queue settings) and will move kfree_skb responsibility
to the caller.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
NFLOG already does the same thing for NETFILTER_NETLINK_LOG.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
As this ct won't be seen by the others, we don't need to set the
IPS_CONFIRMED_BIT in atomic way.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The setsockopt() syscall to replace tables is already recorded
in the audit logs. This patch stores additional information
such as table name and netfilter protocol.
Cc: Patrick McHardy <kaber@trash.net>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch adds a new netfilter target which creates audit records
for packets traversing a certain chain.
It can be used to record packets which are rejected administraively
as follows:
-N AUDIT_DROP
-A AUDIT_DROP -j AUDIT --type DROP
-A AUDIT_DROP -j DROP
a rule which would typically drop or reject a packet would then
invoke the new chain to record packets before dropping them.
-j AUDIT_DROP
The module is protocol independant and works for iptables, ip6tables
and ebtables.
The following information is logged:
- netfilter hook
- packet length
- incomming/outgoing interface
- MAC src/dst/proto for ethernet packets
- src/dst/protocol address for IPv4/IPv6
- src/dst port for TCP/UDP/UDPLITE
- icmp type/code
Cc: Patrick McHardy <kaber@trash.net>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Use is_vmalloc_addr() in nf_ct_free_hashtable() and get rid of
the vmalloc flags to indicate that a hash table has been allocated
using vmalloc().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Fix dependencies of netfilter realm match: it depends on NET_CLS_ROUTE,
which itself depends on NET_SCHED; this dependency is missing from netfilter.
Since matching on realms is also useful without having NET_SCHED enabled and
the option really only controls whether the tclassid member is included in
route and dst entries, rename the config option to IP_ROUTE_CLASSID and move
it outside of traffic scheduling context to get rid of the NET_SCHED dependeny.
Reported-by: Vladis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch fixes a loop in ctnetlink_get_conntrack() that can be
triggered if you use the same socket to receive events and to
perform a GET operation. Under heavy load, netlink_unicast()
may return -EAGAIN, this error code is reserved in nfnetlink for
the module load-on-demand. Instead, we return -ENOBUFS which is
the appropriate error code that has to be propagated to
user-space.
Reported-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
One iptables invocation with 135000 rules takes 35 seconds of cpu time
on a recent server, using a 32bit distro and a 64bit kernel.
We eventually trigger NMI/RCU watchdog.
INFO: rcu_sched_state detected stall on CPU 3 (t=6000 jiffies)
COMPAT mode has quadratic behavior and consume 16 bytes of memory per
rule.
Switch the xt_compat algos to use an array instead of list, and use a
binary search to locate an offset in the sorted array.
This halves memory need (8 bytes per rule), and removes quadratic
behavior [ O(N*N) -> O(N*log2(N)) ]
Time of iptables goes from 35 s to 150 ms.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new revision 3 that contains port ranges for all of origsrc,
origdst, replsrc and repldst. The high ports are appended to the
original v2 data structure to allow sharing most of the code with
v1 and v2. Use of the revision specific port matching function is
made dependant on par->match->revision.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
all init_net removed, (except for some alloc related
that needs to be there)
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
init_net removed in __ip_vs_addr_is_local_v6, and got net as param.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Last two global vars to be moved,
ip_vs_ftpsvc_counter and ip_vs_nullsvc_counter.
[horms@verge.net.au: removed whitespace-change-only hunk]
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
trash list per namspace,
and reordering of some params in dst struct.
[ horms@verge.net.au: Use cancel_delayed_work_sync() instead of
cancel_rearming_delayed_work(). Found during
merge conflict resoliution ]
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch makes defense work timer per name-space,
A net ptr had to be added to the ipvs struct,
since it's needed by defense_work_handler.
[ horms@verge.net.au: Use cancel_delayed_work_sync() instead of
cancel_rearming_delayed_work(). Found during
merge conflict resoliution ]
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Moving global vars to ipvs struct, except for svc table lock.
Next patch for ctl will be drop-rate handling.
*v3
__ip_vs_mutex remains global
ip_vs_conntrack_enabled(struct netns_ipvs *ipvs)
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Connection hash table is now name space aware.
i.e. net ptr >> 8 is xor:ed to the hash,
and this is the first param to be compared.
The net struct is 0xa40 in size ( a little bit smaller for 32 bit arch:s)
and cache-line aligned, so a ptr >> 5 might be a more clever solution ?
All lookups where net is compared uses net_eq() which returns 1 when netns
is disabled, and the compiler seems to do something clever in that case.
ip_vs_conn_fill_param() have *net as first param now.
Three new inlines added to keep conn struct smaller
when names space is disabled.
- ip_vs_conn_net()
- ip_vs_conn_net_set()
- ip_vs_conn_net_eq()
*v3
moved net compare to the end in "fast path"
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The statistic counter locks for every packet are now removed,
and that statistic is now per CPU, i.e. no locks needed.
However summing is made in ip_vs_est into ip_vs_stats struct
which is moved to ipvs struc.
procfs, ip_vs_stats now have a "per cpu" count and a grand total.
A new function seq_file_single_net() in ip_vs.h created for handling of
single_open_net() since it does not place net ptr in a struct, like others.
/var/lib/lxc # cat /proc/net/ip_vs_stats_percpu
Total Incoming Outgoing Incoming Outgoing
CPU Conns Packets Packets Bytes Bytes
0 0 3 1 9D 34
1 0 1 2 49 70
2 0 1 2 34 76
3 1 2 2 70 74
~ 1 7 7 18A 18E
Conns/s Pkts/s Pkts/s Bytes/s Bytes/s
0 0 0 0 0
*v3
ip_vs_stats reamains as before, instead ip_vs_stats_percpu is added.
u64 seq lock added
*v4
Bug correction inbytes and outbytes as own vars..
per_cpu counter for all stats now as suggested by Julian.
[horms@verge.net.au: removed whitespace-change-only hunk]
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
All global variables moved to struct ipvs,
most external changes fixed (i.e. init_net removed)
in sync_buf create + 4 replaced by sizeof(struct..)
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
All variables moved to struct ipvs,
most external changes fixed (i.e. init_net removed)
*v3
timer per ns instead of a common timer in estimator.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
All variables moved to struct ipvs,
most external changes fixed (i.e. init_net removed)
in ip_vs_protocol param struct net *net added to:
- register_app()
- unregister_app()
This affected almost all proto_xxx.c files
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
appcnt and timeout_table moved from struct ip_vs_protocol to
ip_vs proto_data.
struct net *net added as first param to
- register_app()
- unregister_app()
- app_conn_bind()
- ip_vs_conn_new()
[horms@verge.net.au: removed cosmetic-change-only hunk]
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_protocol *pp is replaced by ip_vs_proto_data *pd in
function call in ip_vs_protocol struct i.e. :,
- timeout_change()
- state_transition()
ip_vs_protocol_timeout_change() got ipvs as param, due to above
and a upcoming patch - defence work
Most of this changes are triggered by Julians comment:
"tcp_timeout_change should work with the new struct ip_vs_proto_data
so that tcp_state_table will go to pd->state_table
and set_tcp_state will get pd instead of pp"
*v3
Mostly comments from Julian
The pp -> pd conversion should start from functions like
ip_vs_out() that use pp = ip_vs_proto_get(iph.protocol),
now they should use ip_vs_proto_data_get(net, iph.protocol).
conn_in_get() and conn_out_get() unused param *pp, removed.
*v4
ip_vs_protocol_timeout_change() walk the proto_data path.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
In this phase (one), all local vars will be moved to ipvs struct.
Remaining work, add param struct net *net to a couple of
functions that common for all protos.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
In this phase (one), all local vars will be moved to ipvs struct.
Remaining work, add param struct net *net to a couple of
functions that is common for all protos and use ip_vs_proto_data
*v3
Removed unuset function set_state_timeout()
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
In this phase (one), all local vars will be moved to ipvs struct.
Remaining work, add param struct net *net to a couple of
functions that is common for all protos and use ip_vs_proto_data
*v3
Removed unused function set_state_timeout()
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
In this phase (one), all local vars will be moved to ipvs struct.
Remaining work, add param struct net *net to a couple of
functions that is common for all protos and use all
ip_vs_proto_data
*v3
Removed unused function as sugested by Simon
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Add support for protocol data per name-space.
in struct ip_vs_protocol, appcnt will be removed when all protos
are modified for network name-space.
This patch causes warnings of unused functions, they will be used
when next patch will be applied.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
var sysctl_ip_vs_lblc_expiration moved to ipvs struct as
sysctl_lblc_expiration
procfs updated to handle this.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
var sysctl_ip_vs_lblcr_expiration moved to ipvs struct as
sysctl_lblcr_expiration
procfs updated to handle this.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Services hash tables got netns ptr a hash arg,
While Real Servers (rs) has been moved to ipvs struct.
Two new inline functions added to get net ptr from skb.
Since ip_vs is called from different contexts there is two
places to dig for the net ptr skb->dev or skb->sk
this is handled in skb_net() and skb_sknet()
Global functions, ip_vs_service_get() ip_vs_lookup_real_service()
etc have got struct net *net as first param.
If possible get net ptr skb etc,
- if not &init_net is used at this early stage of patching.
ip_vs_ctl.c procfs not ready for netns yet.
*v3
Comments by Julian
- __ip_vs_service_find and __ip_vs_svc_fwm_find are fast path,
net_eq(svc->net, net) so the check is at the end now.
- net = skb_net(skb) in ip_vs_out moved after check for skb_dst.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Preparation for network name-space init, in this stage
some empty functions exists.
In most files there is a check if it is root ns i.e. init_net
if (!net_eq(net, &init_net))
return ...
this will be removed by the last patch, when enabling name-space.
*v3
ip_vs_conn.c merge error corrected.
net_ipvs #ifdef removed as sugested by Jan Engelhardt
[ horms@verge.net.au: Removed whitespace-change-only hunks ]
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The netlink interface to dump the connection tracking table has a race
when entries are deleted at the same time. A customer reported a crash
and the backtrace showed thatctnetlink_dump_table was running while a
conntrack entry was being destroyed.
(see https://bugzilla.vyatta.com/show_bug.cgi?id=6402).
According to RCU documentation, when using hlist_nulls the reader
must handle the case of seeing a deleted entry and not proceed
further down the linked list. The old code would continue
which caused the scan to walk into the free list.
This patch uses locking (rather than RCU) for this operation which
is guaranteed safe, and no longer requires getting reference while
doing dump operation.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Using "iptables -L" with a lot of rules have a too big BH latency.
Jesper mentioned ~6 ms and worried of frame drops.
Switch to a per_cpu seqlock scheme, so that taking a snapshot of
counters doesnt need to block BH (for this cpu, but also other cpus).
This adds two increments on seqlock sequence per ipt_do_table() call,
its a reasonable cost for allowing "iptables -L" not block BH
processing.
Reported-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Due to NLM_F_DUMP is composed of two bits, NLM_F_ROOT | NLM_F_MATCH,
when doing "if (x & NLM_F_DUMP)", it tests for _either_ of the bits
being set. Because NLM_F_MATCH's value overlaps with NLM_F_EXCL,
non-dump requests with NLM_F_EXCL set are mistaken as dump requests.
Substitute the condition to test for _all_ bits being set.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
usb: don't use flush_scheduled_work()
speedtch: don't abuse struct delayed_work
media/video: don't use flush_scheduled_work()
media/video: explicitly flush request_module work
ioc4: use static work_struct for ioc4_load_modules()
init: don't call flush_scheduled_work() from do_initcalls()
s390: don't use flush_scheduled_work()
rtc: don't use flush_scheduled_work()
mmc: update workqueue usages
mfd: update workqueue usages
dvb: don't use flush_scheduled_work()
leds-wm8350: don't use flush_scheduled_work()
mISDN: don't use flush_scheduled_work()
macintosh/ams: don't use flush_scheduled_work()
vmwgfx: don't use flush_scheduled_work()
tpm: don't use flush_scheduled_work()
sonypi: don't use flush_scheduled_work()
hvsi: don't use flush_scheduled_work()
xen: don't use flush_scheduled_work()
gdrom: don't use flush_scheduled_work()
...
Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
In 1ae4de0cdf, the secctx was exported
via the /proc/net/netfilter/nf_conntrack and ctnetlink interfaces
instead of the secmark.
That patch introduced the use of security_secid_to_secctx() which may
return a non-zero value on error.
In one of my setups, I have NF_CONNTRACK_SECMARK enabled but no
security modules. Thus, security_secid_to_secctx() returns a negative
value that results in the breakage of the /proc and `conntrack -L'
outputs. To fix this, we skip the inclusion of secctx if the
aforementioned function fails.
This patch also fixes the dynamic netlink message size calculation
if security_secid_to_secctx() returns an error, since its logic is
also wrong.
This problem exists in Linux kernel >= 2.6.37.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since nf_ct_expect_dst_hash() may be called without nf_conntrack_lock
locked, nf_ct_expect_hash_rnd should be initialized in the atomic way.
In this patch, we use nf_conntrack_hash_rnd instead of
nf_ct_expect_hash_rnd.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cancel_rearming_delayed_work[queue]() has been superceded by
cancel_delayed_work_sync() quite some time ago. Convert all the
in-kernel users. The conversions are completely equivalent and
trivial.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: netdev@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: netfilter-devel@vger.kernel.org
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org
This patch adds a sysclt net.ipv4.vs.sync_version
that can be used to send sync msg in version 0 or 1 format.
sync_version value is logical,
Value 1 (default) New version
0 Plain old version
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Enable sending and removal of version 0 sending
Affected functions,
ip_vs_sync_buff_create()
ip_vs_sync_conn()
ip_vs_core.c removal of IPv4 check.
*v5
Just check cp->pe_data_len in ip_vs_sync_conn
Check if padding needed before adding a new sync_conn
to the buffer, i.e. avoid sending padding at the end.
*v4
moved sanity check and pe_name_len after sloop.
use cp->pe instead of cp->dest->svc->pe
real length in each sync_conn, not padded length
however total size of a sync_msg includes padding.
*v3
Sending ip_vs_sync_conn_options in network order.
Sending Templates for ONE_PACKET conn.
Renaming of ip_vs_sync_mesg to ip_vs_sync_mesg_v0
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Functionality improvements
* flags changed from 16 to 32 bits
* fwmark added (32 bits)
* timeout in sec. added (32 bits)
* pe data added (Variable length)
* IPv6 capabilities (3x16 bytes for addr.)
* Version and type in every conn msg.
ip_vs_process_message() now handles Version 1 messages
and will call ip_vs_process_message_v0() for version 0 messages.
ip_vs_proc_conn() is common for both version, and handles the update of
connection hash.
ip_vs_conn_fill_param_sync() - Version 1 messages only
ip_vs_conn_fill_param_sync_v0() - Version 0 messages only
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
New structs defined for version 1 of sync.
* ip_vs_sync_v4 Ipv4 base format struct
* ip_vs_sync_v6 Ipv6 base format struct
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
If ip_vs_conn_fill_param_persist return an error to ip_vs_sched_persist,
this error must propagate as ignored=-1 to ip_vs_schedule().
Errors from ip_vs_conn_new() in ip_vs_sched_persist() and ip_vs_schedule()
should also return *ignored=-1;
This patch just relies on the fact that ignored is 1 before calling
ip_vs_sched_persist().
Sent from Julian:
"The new case when ip_vs_conn_fill_param_persist fails
should set *ignored = -1, so that we can use NF_DROP,
see below. *ignored = -1 should be also used for ip_vs_conn_new
failure in ip_vs_sched_persist() and ip_vs_schedule().
The new negative value should be handled in tcp,udp,sctp"
"To summarize:
- *ignored = 1:
protocol tried to schedule (eg. on SYN), found svc but the
svc/scheduler decides that this packet should be accepted with
NF_ACCEPT because it must not be scheduled.
- *ignored = 0:
scheduler can not find destination, so try bypass or
return ICMP and then NF_DROP (ip_vs_leave).
- *ignored = -1:
scheduler tried to schedule but fatal error occurred, eg.
ip_vs_conn_new failure (ENOMEM) or ip_vs_sip_fill_param
failure such as missing Call-ID, ENOMEM on skb_linearize
or pe_data. In this case we should return NF_DROP without
any attempts to send ICMP with ip_vs_leave."
More or less all ideas and input to this patch is work from
Julian Anastasov
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
L7 helpers like sip needs skb defrag
since L7 data can be fragmented.
This patch requires "IPVS Break ports-2 into src_port and dst_port" patch
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Avoid sending invalid pointer due to skb_linearize() call.
This patch prepares for next patch where skb_linearize is a part.
In ip_vs_sched_persist() params the ports ptr will be replaced by
src and dst port.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
One struct will have fwmark added:
* ip_vs_conn
ip_vs_conn_new() and ip_vs_find_dest()
will have an extra param - fwmark
The effects of that, is in this patch.
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols.
Therefore IP_VS can't be linked statically when conntrack
is built modular.
Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the macros defined for the members of flowi to clean the code up.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SELinux would like to pass certain fatal errors back up the stack. This patch
implements the generic netfilter support for this functionality.
Based-on-patch-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Attempt at allowing LVS to transmit skbs of greater than MTU length that
have been aggregated by GRO and can thus be deaggregated by GSO.
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_conn_tab_bits & ip_vs_conn_tab_mask are static to
ipvs/ip_vs_conn.c
ip_vs_conn_tab_size, ip_vs_conn_tab_mask, ip_vs_conn_tab [the pointer],
ip_vs_conn_rnd are mostly read.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
It is assigned to a non-const variable and its contents are modified.
Acked-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Only match persistence engine data if it was
created by the same persistence engine.
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The dest of a connection may not exist if it has been created as the result
of connection synchronisation. But in order for connection entries for
templates with persistence engine data created through connection
synchronisation to be valid access to the persistence engine pointer is
required. So add the persistence engine to the connection itself.
Signed-off-by: Simon Horman <horms@verge.net.au>
Use RCU helpers to reduce number of sparse warnings
(CONFIG_SPARSE_RCU_POINTER=y), and adds lockdep checks.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Add some __rcu annotations and use helpers to reduce number of sparse
warnings (CONFIG_SPARSE_RCU_POINTER=y)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
In function update_alloc_size(), sizeof(struct nf_ct_ext) is added twice
wrongly.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
ct->proto is big(60 bytes) due to structure ip_ct_tcp, and we don't need
to initialize the whole for all the other protocols. This patch moves
proto to the end of structure nf_conn, and pushes the initialization down
to the individual protocols.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
When we test rt->fl.iif against zero, we're seeing if it's
an output or an input route.
Make that explicit with some helper functions.
Signed-off-by: David S. Miller <davem@davemloft.net>
While doing __rcu annotations work on net/netfilter I found following
bug. On some arches, it is possible we publish a table while its content
is not yet committed to memory, and lockless reader can dereference wild
pointer.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Otherwise error indications from ipv6_find_hdr() won't be noticed.
This required making the protocol argument to extract_icmp6_fields()
signed too.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit ea781f197d (use SLAB_DESTROY_BY_RCU and get rid of call_rcu())
did a mistake in __vmalloc() call in nf_ct_alloc_hashtable().
I forgot to add __GFP_HIGHMEM, so pages were taken from LOWMEM only.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
One of the previous tproxy related patches split IPv6 defragmentation and
connection tracking, but did not correctly add Kconfig stanzas to handle the
new dependencies correctly. This patch fixes that by making the config options
mirror the setup we have for IPv4: a distinct config option for defragmentation
that is automatically selected by both connection tracking and
xt_TPROXY/xt_socket.
The patch also changes the #ifdefs enclosing IPv6 specific code in xt_socket
and xt_TPROXY: we only compile these in case we have ip6tables support enabled.
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
vlan: Calling vlan_hwaccel_do_receive() is always valid.
tproxy: use the interface primary IP address as a default value for --on-ip
tproxy: added IPv6 support to the socket match
cxgb3: function namespace cleanup
tproxy: added IPv6 support to the TPROXY target
tproxy: added IPv6 socket lookup function to nf_tproxy_core
be2net: Changes to use only priority codes allowed by f/w
tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
tproxy: added tproxy sockopt interface in the IPV6 layer
tproxy: added udp6_lib_lookup function
tproxy: added const specifiers to udp lookup functions
tproxy: split off ipv6 defragmentation to a separate module
l2tp: small cleanup
nf_nat: restrict ICMP translation for embedded header
can: mcp251x: fix generation of error frames
can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
can-raw: add msg_flags to distinguish local traffic
9p: client code cleanup
rds: make local functions/variables static
...
Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
The REDIRECT target and the older TProxy versions used the primary address
of the incoming interface as the default value of the --on-ip parameter.
This was unintentionally changed during the initial TProxy submission and
caused confusion among users.
Since IPv6 has no notion of primary address, we just select the first address
on the list: this way the socket lookup finds wildcard bound sockets
properly and we cannot really do better without the user telling us the
IPv6 address of the proxy.
This is implemented for both IPv4 and IPv6.
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The ICMP extraction bits were contributed by Harry Mason.
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This requires a new revision as the old target structure was
IPv4 specific.
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Also, inline this function as the lookup_type is always a literal
and inlining removes branches performed at runtime.
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Without tproxy redirections an incoming SYN kicks out conflicting
TIME_WAIT sockets, in order to handle clients that reuse ports
within the TIME_WAIT period.
The same mechanism didn't work in case TProxy is involved in finding
the proper socket, as the time_wait processing code looked up the
listening socket assuming that the listener addr/port matches those
of the established connection.
This is not the case with TProxy as the listener addr/port is possibly
changed with the tproxy rule.
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
As skb->protocol is not valid in LOCAL_OUT add
parameter for address family in packet debugging functions.
Even if ports are not present in AH and ESP change them to
use ip_vs_tcpudp_debug_packet to show at least valid addresses
as before. This patch removes the last user of skb->protocol
in IPVS.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Connections in backup server should inherit the
forwarding method from real server. It is a way to fix a
problem where the forwarding method in backup connection
is damaged by logical OR operation with the real server's
connection flags. And the change is needed for setups
where the backup server uses different forwarding method
for the same real servers.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch deals with local client processing.
Prefer LOCAL_OUT hook for scheduling connections from
local clients. LOCAL_IN is still supported if the packets are
not marked as processed in LOCAL_OUT. The idea to process
requests in LOCAL_OUT is to alter conntrack reply before
it is confirmed at POST_ROUTING. If the local requests are
processed in LOCAL_IN the conntrack can not be updated
and matching by state is impossible.
Add the following handlers:
- ip_vs_reply[46] at LOCAL_IN:99 to process replies from
remote real servers to local clients. Now when both
replies from remote real servers (ip_vs_reply*) and
local real servers (ip_vs_local_reply*) are handled
it is safe to remove the conn_out_get call from ip_vs_in
because it does not support related ICMP packets.
- ip_vs_local_request[46] at LOCAL_OUT:-98 to process
requests from local client
Handling in LOCAL_OUT causes some changes:
- as skb->dev, skb->protocol and skb->pkt_type are not defined
in LOCAL_OUT make sure we set skb->dev before calling icmpv6_send,
prefer skb_dst(skb) for struct net and remove the skb->protocol
checks from TUN transmitters.
[ horms@verge.net.au: removed trailing whitespace ]
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch deals with local real servers:
- Add support for DNAT to local address (different real server port).
It needs ip_vs_out hook in LOCAL_OUT for both families because
skb->protocol is not set for locally generated packets and can not
be used to set 'af'.
- Skip packets in ip_vs_in marked with skb->ipvs_property because
ip_vs_out processing can be executed in LOCAL_OUT but we still
have the conn_out_get check in ip_vs_in.
- Ignore packets with inet->nodefrag from local stack
- Require skb_dst(skb) != NULL because we use it to get struct net
- Add support for changing the route to local IPv4 stack after DNAT
depending on the source address type. Local client sets output
route and the remote client sets input route. It looks like
IPv6 does not need such rerouting because the replies use
addresses from initial incoming header, not from skb route.
- All transmitters now have strict checks for the destination
address type: redirect from non-local address to local real
server requires NAT method, local address can not be used as
source address when talking to remote real server.
- Now LOCALNODE is not set explicitly as forwarding
method in real server to allow the connections to provide
correct forwarding method to the backup server. Not sure if
this breaks tools that expect to see 'Local' real server type.
If needed, this can be supported with new flag IP_VS_DEST_F_LOCAL.
Now it should be possible connections in backup that lost
their fwmark information during sync to be forwarded properly
to their daddr, even if it is local address in the backup server.
By this way backup could be used as real server for DR or TUN,
for NAT there are some restrictions because tuple collisions
in conntracks can create problems for the traffic.
- Call ip_vs_dst_reset when destination is updated in case
some real server IP type is changed between local and remote.
[ horms@verge.net.au: removed trailing whitespace ]
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Currently, ip_route_me_harder after ip_vs_out_icmp
is called even if packet is not related to IPVS connection.
Move it into handle_response_icmp. Also, force rerouting
if sending to local client because IPv4 stack uses addresses
from the route.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Create new function ip_vs_defrag_user to return correct
IP_DEFRAG_xxx user depending on the hooknum. It will be needed
when we add handlers in LOCAL_OUT.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The recent change in IP_VS_XMIT_TUNNEL to set
CHECKSUM_NONE is not correct. After adding IPIP header
skb->csum becomes invalid but the CHECKSUM_PARTIAL
case must be supported. So, use skb_forward_csum() which is
most suitable for us to allow local clients to send IPIP
to remote real server.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Delivering locally ICMP from FORWARD hook is not supported.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
This patch is needed to avoid scheduling of
packets from local real server when we add ip_vs_in
in LOCAL_OUT hook to support local client.
Currently, when ip_vs_in can not find existing
connection it tries to create new one by calling ip_vs_schedule.
The default indication from ip_vs_schedule was if
connection was scheduled to real server. If real server is
not available we try to use the bypass forwarding method
or to send ICMP error. But in some cases we do not want to use
the bypass feature. So, add flag 'ignored' to indicate if
the scheduler ignores this packet.
Make sure we do not create new connections from replies.
We can hit this problem for persistent services and local real
server when ip_vs_in is added to LOCAL_OUT hook to handle
local clients.
Also, make sure ip_vs_schedule ignores SYN packets
for Active FTP DATA from local real server. The FTP DATA
connection should be created on SYN+ACK from client to assign
correct connection daddr.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Change skb->ipvs_property semantic. This is preparation
to support ip_vs_out processing in LOCAL_OUT. ipvs_property=1
will be used to avoid expensive lookups for traffic sent by
transmitters. Now when conntrack support is not used we call
ip_vs_notrack method to avoid problems in OUTPUT and
POST_ROUTING hooks instead of exiting POST_ROUTING as before.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Avoid full checksum calculation for apps that can provide
info whether csum was broken after payload mangling. For now only
ip_vs_ftp mangles payload and it updates the csum, so the full
recalculation is avoided for all packets.
Add CHECKSUM_UNNECESSARY for snat_handler (TCP and UDP).
It is needed to support SNAT from local address for the case
when csum is fully recalculated.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
