As we have decouple decompression from data delivery we can now rename all
occurences of process_data in receive path.
Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Separating skb delivery from decompression ensures that we can support further
decompression schemes and removes the mixed return value of error codes with
NET_RX_FOO.
Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently there are potentially 2 skb_copy_expand calls in IPHC
decompression. This patch replaces this with one call to
skb_cow which will check to see if there is enough headroom
first to ensure it's only done if necessary and will handle
alignment issues for cache.
As skb_cow uses pskb_expand_head we ensure the skb isn't shared from
bluetooth and ieee802.15.4 code that use the IPHC decompression.
Signed-off-by: Martin Townsend <martin.townsend@xsilon.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Change config symbol 6LOWPAN from type bool to type tristate, so
6LoWPAN can be built modular, just like IPV6
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
net/6lowpan/iphc.c
Minor conflicts in iphc.c were changes overlapping with some
style cleanups.
John W. Linville says:
====================
Please pull this last(?) batch of wireless change intended for the
3.17 stream...
For the NFC bits, Samuel says:
"This is a rather quiet one, we have:
- A new driver from ST Microelectronics for their NCI ST21NFCB,
including device tree support.
- p2p support for the ST21NFCA driver
- A few fixes an enhancements for the NFC digital laye"
For the Atheros bits, Kalle says:
"Michal and Janusz did some important RX aggregation fixes, basically we
were missing RX reordering altogether. The 10.1 firmware doesn't support
Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc
support with that firmware. Also he implemented a workaround for a KVM
issue."
For the Bluetooth bits, Gustavo and Johan say:
"To quote Gustavo from his previous request:
'Some last minute fixes for -next. We have a fix for a use after free in
RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with
auto-connection handling. Last, we added support for reading the codec and
MWS setting for controllers that support these features.'
Additionally there are fixes to LE scanning, an update to conform to the 4.1
core specification as well as fixes for tracking the page scan state. All
of these fixes are important for 3.17."
And,
"We've got:
- 6lowpan fixes/cleanups
- A couple crash fixes, one for the Marvell HCI driver and another in LE SMP.
- Fix for an incorrect connected state check
- Fix for the bondable requirement during pairing (an issue which had
crept in because of using "pairable" when in fact the actual meaning
was "bondable" (these have different meanings in Bluetooth)"
Along with those are some late-breaking hardware support patches in
brcmfmac and b43 as well as a stray ath9k patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
CHECK: braces {} should be used on all arms of this statement
+ if ((iphc0 & 0x03) != LOWPAN_IPHC_TTL_I)
[...]
+ else {
[...]
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
WARNING: Missing a blank line after declarations
+ struct sk_buff *new;
+ if (uncompress_udp_header(skb, &uh))
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch fixes all the issues with alignment matching of open
parenthesis found by checkpatch.pl and makes them follow the
network coding style now.
CHECK: Alignment should match open parenthesis
+static int uncompress_addr(struct sk_buff *skb,
+ struct in6_addr *ipaddr, const u8 address_mode,
CHECK: Alignment should match open parenthesis
+static int uncompress_context_based_src_addr(struct sk_buff *skb,
+ struct in6_addr *ipaddr,
CHECK: Alignment should match open parenthesis
+static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
+ struct net_device *dev, skb_delivery_cb deliver_skb)
CHECK: Alignment should match open parenthesis
+ new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
+ GFP_ATOMIC);
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb data dump before receiving",
+ new->data, new->len);
CHECK: Alignment should match open parenthesis
+lowpan_uncompress_multicast_daddr(struct sk_buff *skb,
+ struct in6_addr *ipaddr,
CHECK: Alignment should match open parenthesis
+ raw_dump_inline(NULL, "Reconstructed ipv6 multicast addr is",
+ ipaddr->s6_addr, 16);
CHECK: Alignment should match open parenthesis
+int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
+ const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb data dump uncompressed",
+ skb->data, skb->len);
CHECK: Alignment should match open parenthesis
+ err = uncompress_addr(skb, &hdr.saddr, tmp, saddr,
+ saddr_type, saddr_len);
CHECK: Alignment should match open parenthesis
+ err = uncompress_addr(skb, &hdr.daddr, tmp, daddr,
+ daddr_type, daddr_len);
CHECK: Alignment should match open parenthesis
+ pr_debug("dest: stateless compression mode %d dest %pI6c\n",
+ tmp, &hdr.daddr);
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw UDP header dump",
+ (u8 *)&uh, sizeof(uh));
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw header dump", (u8 *)&hdr,
+ sizeof(hdr));
CHECK: Alignment should match open parenthesis
+int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
+ unsigned short type, const void *_daddr,
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb network header dump",
+ skb_network_header(skb), sizeof(struct ipv6hdr));
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__,
+ "sending raw skb network uncompressed packet",
CHECK: Alignment should match open parenthesis
+ if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+ (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {
WARNING: quoted string split across lines
+ pr_debug("dest address unicast link-local %pI6c "
+ "iphc1 0x%02x\n", &hdr->daddr, iphc1);
CHECK: Alignment should match open parenthesis
+ raw_dump_table(__func__, "raw skb data dump compressed",
+ skb->data, skb->len);
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch fixes all the block comment issues found by checkpatch.pl and
makes them match the network style now.
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Based on patches from Jon Smirl <jonsmirl@gmail.com>
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source and
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source context
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * UDP lenght needs to be infered from the lower layers
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Traffic Class and FLow Label carried in-line
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Traffic class carried in-line
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Flow Label carried in-line
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * replace the compressed UDP head by the uncompressed UDP
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * As we copy some bit-length fields, in the IPHC encoding bytes,
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Traffic class, flow label
WARNING: networking block comments don't use an empty /* line, use /* Comment...
+ /*
+ * Hop limit
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This memory is placed on stack and can't be null so remove the check on
null.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch removes the own implementation to check of link-layer,
broadcast and any address type and use the IPv6 api for that.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch uses the lowpan_push_hc_data functions in several places
where we can use it. The lowpan_push_hc_data was introduced in some
previous patches.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We introduced the lowpan_fetch_skb function in some previous patches for
6lowpan to have a generic fetch function. This patch drops the old
function and use the generic lowpan_fetch_skb one.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The hc06_ptr pointer variable stands for header compression draft-06. We
are mostly rfc complaint. This patch rename the variable to normal hc_ptr.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
John W. Linville says:
====================
pull request: wireless-next 2014-07-25
Please pull this batch of updates intended for the 3.17 stream!
For the mac80211 bits, Johannes says:
"We have a lot of TDLS patches, among them a fix that should make hwsim
tests happy again. The rest, this time, is mostly small fixes."
For the Bluetooth bits, Gustavo says:
"Some more patches for 3.17. The most important change here is the move of
the 6lowpan code to net/6lowpan. It has been agreed with Davem that this
change will go through the bluetooth tree. The rest are mostly clean up and
fixes."
and,
"Here follows some more patches for 3.17. These are mostly fixes to what
we've sent to you before for next merge window."
For the iwlwifi bits, Emmanuel says:
"I have the usual amount of BT Coex stuff. Arik continues to work
on TDLS and Ariej contributes a few things for HS2.0. I added a few
more things to the firmware debugging infrastructure. Eran fixes a
small bug - pretty normal content."
And for the Atheros bits, Kalle says:
"For ath6kl me and Jessica added support for ar6004 hw3.0, our latest
version of ar6004.
For ath10k Janusz added a printout so that it's easier to check what
ath10k kconfig options are enabled. He also added a debugfs file to
configure maximum amsdu and ampdu values. Also we had few fixes as
usual."
On top of that is the usual large batch of various driver updates --
brcmfmac, mwifiex, the TI drivers, and wil6210 all get some action.
RafaĆ has also been very busy with b43 and related updates.
Also, I pulled the wireless tree into this in order to resolve a
merge conflict...
P.S. The change to fs/compat_ioctl.c reflects a name change in a
Bluetooth header file...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves generic code which is used by bluetooth and ieee802154
6lowpan to a new net/6lowpan directory. This directory contains generic
6LoWPAN code which is shared between bluetooth and ieee802154 MAC-Layer.
This is the IPHC - "IPv6 Header Compression" format at the moment. Which
is described by RFC 6282 [0]. The BLTE 6LoWPAN draft describes that the
IPHC is the same format like IEEE 802.15.4, see [1].
Futuremore we can put more code into this directory which is shared
between BLTE and IEEE 802.15.4 6LoWPAN like RFC 6775 or the routing
protocol RPL RFC 6550.
To avoid naming conflicts I renamed 6lowpan-y to ieee802154_6lowpan-y
in net/ieee802154/Makefile.
[0] http://tools.ietf.org/html/rfc6282
[1] http://tools.ietf.org/html/draft-ietf-6lowpan-btle-12#section-3.2
[2] http://tools.ietf.org/html/rfc6775
[3] http://tools.ietf.org/html/rfc6550
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>