With ftrace_dump_on_oops, we previously did not open the tracer in
question, sometimes causing the trace output to be useless.
For example, the function_graph tracer with tracing_thresh set dumped via
ftrace_dump_on_oops would show a series of '}' indented at different levels,
but no function names.
call trace->open() (and do a few other fixups copied from the normal dump
path) to make the output more intelligible.
Link: http://lkml.kernel.org/r/1382554197-16961-1-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:
Before:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 2048
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.
After:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters. For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.
The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).
Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Andrey reported the following report:
ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3
ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3)
Accessed by thread T13003:
#0 ffffffff810dd2da (asan_report_error+0x32a/0x440)
#1 ffffffff810dc6b0 (asan_check_region+0x30/0x40)
#2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20)
#3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260)
#4 ffffffff812a1065 (__fput+0x155/0x360)
#5 ffffffff812a12de (____fput+0x1e/0x30)
#6 ffffffff8111708d (task_work_run+0x10d/0x140)
#7 ffffffff810ea043 (do_exit+0x433/0x11f0)
#8 ffffffff810eaee4 (do_group_exit+0x84/0x130)
#9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30)
#10 ffffffff81928782 (system_call_fastpath+0x16/0x1b)
Allocated by thread T5167:
#0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0)
#1 ffffffff8128337c (__kmalloc+0xbc/0x500)
#2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90)
#3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0)
#4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40)
#5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430)
#6 ffffffff8129b668 (finish_open+0x68/0xa0)
#7 ffffffff812b66ac (do_last+0xb8c/0x1710)
#8 ffffffff812b7350 (path_openat+0x120/0xb50)
#9 ffffffff812b8884 (do_filp_open+0x54/0xb0)
#10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0)
#11 ffffffff8129d4b7 (SyS_open+0x37/0x50)
#12 ffffffff81928782 (system_call_fastpath+0x16/0x1b)
Shadow bytes around the buggy address:
ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa
ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb
ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap redzone: fa
Heap kmalloc redzone: fb
Freed heap region: fd
Shadow gap: fe
The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;'
Although the crash happened in ftrace_regex_open() the real bug
occurred in trace_get_user() where there's an incrementation to
parser->idx without a check against the size. The way it is triggered
is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop
that reads the last character stores it and then breaks out because
there is no more characters. Then the last character is read to determine
what to do next, and the index is incremented without checking size.
Then the caller of trace_get_user() usually nulls out the last character
with a zero, but since the index is equal to the size, it writes a nul
character after the allocated space, which can corrupt memory.
Luckily, only root user has write access to this file.
Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.home
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current "help" that comes out of the snapshot file when it is
not allocated looks like this:
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Echo 2 says that it does not allocate the buffer, which is correct,
but to be more consistent with "echo 0" it should also state
that it does not free.
Link: http://lkml.kernel.org/r/20130914045916.GA4243@udknight
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allow tracer instances to disable tracing by cpu by moving
the static global tracing_cpumask into trace_array.
Link: http://lkml.kernel.org/r/921622317f239bfc2283cac2242647801ef584f2.1375980149.git.azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fixed two issues with changing the timestamp clock with trace_clock:
- The global buffer was reset on instance clock changes. Change this to pass
the correct per-instance buffer
- ftrace_now() is used to set buf->time_start in tracing_reset_online_cpus().
This was incorrect because ftrace_now() used the global buffer's clock to
return the current time. Change this to use buffer_ftrace_now() which
returns the current time for the correct per-instance buffer.
Also removed tracing_reset_current() because it is not used anywhere
Link: http://lkml.kernel.org/r/1375493777-17261-2-git-send-email-azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Releasing the free_buffer file in an instance causes the global buffer
to be stopped when TRACE_ITER_STOP_ON_FREE is enabled. Operate on the
correct buffer.
Link: http://lkml.kernel.org/r/1375493777-17261-1-git-send-email-azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_read_pipe zeros all fields bellow "seq". The declaration contains
a comment about that, but it doesn't help.
The first field is "snapshot", it's true when current open file is
snapshot. Looks obvious, that it should not be zeroed.
The second field is "started". It was converted from cpumask_t to
cpumask_var_t (v2.6.28-4983-g4462344), in other words it was
converted from cpumask to pointer on cpumask.
Currently the reference on "started" memory is lost after the first read
from tracing_read_pipe and a proper object will never be freed.
The "started" is never dereferenced for trace_pipe, because trace_pipe
can't have the TRACE_FILE_ANNOTATE options.
Link: http://lkml.kernel.org/r/1375463803-3085183-1-git-send-email-avagin@openvz.org
Cc: stable@vger.kernel.org # 2.6.30
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit a82274151a "tracing: Protect ftrace_trace_arrays list in trace_events.c"
added taking the trace_types_lock mutex in trace_events.c as there were
several locations that needed it for protection. Unfortunately, it also
encapsulated a call to tracing_reset_all_online_cpus() which also takes
the trace_types_lock, causing a deadlock.
This happens when a module has tracepoints and has been traced. When the
module is removed, the trace events module notifier will grab the
trace_types_lock, do a bunch of clean ups, and also clears the buffer
by calling tracing_reset_all_online_cpus. This doesn't happen often
which explains why it wasn't caught right away.
Commit a82274151a was marked for stable, which means this must be
sent to stable too.
Link: http://lkml.kernel.org/r/51EEC646.7070306@broadcom.com
Reported-by: Arend van Spril <arend@broadcom.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Cc: Alexander Z Lam <azl@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After the previous changes trace_array_cpu->trace_cpu and
trace_array->trace_cpu becomes write-only. Remove these members
and kill "struct trace_cpu" as well.
As a side effect this also removes memset(per_cpu_memory, 0).
It was not needed, alloc_percpu() returns zero-filled memory.
Link: http://lkml.kernel.org/r/20130723152613.GA23741@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open() and tracing_snapshot_open() are racy, the memory
inode->i_private points to can be already freed.
Convert these last users of "inode->i_private == trace_cpu" to
use "i_private = trace_array" and rely on tracing_get_cpu().
v2: incorporate the fix from Steven, tracing_release() must not
blindly dereference file->private_data unless we know that
the file was opened for reading.
Link: http://lkml.kernel.org/r/20130723152610.GA23737@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open_generic_tc() is racy, the memory inode->i_private
points to can be already freed.
1. Change its last user, tracing_entries_fops, to use
tracing_*_generic_tr() instead.
2. Change debugfs_create_file("buffer_size_kb", data) callers
to pass "data = tr".
3. Change tracing_entries_read() and tracing_entries_write() to
use tracing_get_cpu().
4. Kill the no longer used tracing_open_generic_tc() and
tracing_release_generic_tc().
Link: http://lkml.kernel.org/r/20130723152606.GA23730@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open_generic_tc() is racy, the memory inode->i_private
points to can be already freed.
1. Change one of its users, tracing_stats_fops, to use
tracing_*_generic_tr() instead.
2. Change trace_create_cpu_file("stats", data) to pass "data = tr".
3. Change tracing_stats_read() to use tracing_get_cpu().
Link: http://lkml.kernel.org/r/20130723152603.GA23727@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_buffers_open() is racy, the memory inode->i_private points
to can be already freed.
Change debugfs_create_file("trace_pipe_raw", data) caller to pass
"data = tr", tracing_buffers_open() can use tracing_get_cpu().
Change debugfs_create_file("snapshot_raw_fops", data) caller too,
this file uses tracing_buffers_open/release.
Link: http://lkml.kernel.org/r/20130723152600.GA23720@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open_pipe() is racy, the memory inode->i_private points to
can be already freed.
Change debugfs_create_file("trace_pipe", data) callers to to pass
"data = tr", tracing_open_pipe() can use tracing_get_cpu().
Link: http://lkml.kernel.org/r/20130723152557.GA23717@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every "file_operations" used by tracing_init_debugfs_percpu is buggy.
f_op->open/etc does:
1. struct trace_cpu *tc = inode->i_private;
struct trace_array *tr = tc->tr;
2. trace_array_get(tr) or fail;
3. do_something(tc);
But tc (and tr) can be already freed before trace_array_get() is called.
And it doesn't matter whether this file is per-cpu or it was created by
init_tracer_debugfs(), free_percpu() or kfree() are equally bad.
Note that even 1. is not safe, the freed memory can be unmapped. But even
if it was safe trace_array_get() can wrongly succeed if we also race with
the next new_instance_create() which can re-allocate the same tr, or tc
was overwritten and ->tr points to the valid tr. In this case 3. uses the
freed/reused memory.
Add the new trivial helper, trace_create_cpu_file() which simply calls
trace_create_file() and encodes "cpu" in "struct inode". Another helper,
tracing_get_cpu() will be used to read cpu_nr-or-RING_BUFFER_ALL_CPUS.
The patch abuses ->i_cdev to encode the number, it is never used unless
the file is S_ISCHR(). But we could use something else, say, i_bytes or
even ->d_fsdata. In any case this hack is hidden inside these 2 helpers,
it would be trivial to change them if needed.
This patch only changes tracing_init_debugfs_percpu() to use the new
trace_create_cpu_file(), the next patches will change file_operations.
Note: tracing_get_cpu(inode) is always safe but you can't trust the
result unless trace_array_get() was called, without trace_types_lock
which acts as a barrier it can wrongly return RING_BUFFER_ALL_CPUS.
Link: http://lkml.kernel.org/r/20130723152554.GA23710@redhat.com
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_buffers_open() does trace_array_get() and then it wrongly
inrcements tr->ref again under trace_types_lock. This means that
every caller leaks trace_array:
# cd /sys/kernel/debug/tracing/
# mkdir instances/X
# true < instances/X/per_cpu/cpu0/trace_pipe_raw
# rmdir instances/X
rmdir: failed to remove `instances/X': Device or resource busy
Link: http://lkml.kernel.org/r/20130719153644.GA18899@redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some error paths did not handle ref counting properly, and some trace files need
ref counting.
Link: http://lkml.kernel.org/r/1374171524-11948-1-git-send-email-azl@google.com
Cc: stable@vger.kernel.org # 3.10
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove debugfs directories for tracing instances during creation if an error
occurs causing the trace_array for that instance to not be added to
ftrace_trace_arrays. If the directory continues to exist after the error, it
cannot be removed because the respective trace_array is not in
ftrace_trace_arrays.
Link: http://lkml.kernel.org/r/1373502874-1706-2-git-send-email-azl@google.com
Cc: stable@vger.kernel.org # 3.10
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We should use CONFIG_STACK_TRACER to guard readme text
of stack tracer related file, not CONFIG_STACKTRACE.
Link: http://lkml.kernel.org/r/51E3B3A2.8080609@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
were added to 3.10, which includes several bug fixes that have been
marked for stable.
As for new features, there were a few, but nothing to write to LWN about.
These include:
New function trigger called "dump" and "cpudump" that will cause
ftrace to dump its buffer to the console when the function is called.
The difference between "dump" and "cpudump" is that "dump" will dump
the entire contents of the ftrace buffer, where as "cpudump" will only
dump the contents of the ftrace buffer for the CPU that called the function.
Another small enhancement is a new sysctl switch called "traceoff_on_warning"
which, when enabled, will disable tracing if any WARN_ON() is triggered.
This is useful if you want to debug what caused a warning and do not
want to risk losing your trace data by the ring buffer overwriting the
data before you can disable it. There's also a kernel command line
option that will make this enabled at boot up called the same thing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJR1uF2AAoJEOdOSU1xswtMJ1IH/2LSiZAKTA2QaRgGQC/5Bb9c
XSOI1HfD/78lmUvTyb0AX8sLpkzZlvIONEQ/WaZUFo1Zjbrl45zJUwMkTE9uImEg
ZqI5x8OiiN6j4XrRbfYn3Ti060H/Jq41pZXa+shh961Vv51ilv/1yyLkoRmnjzuO
JTloPdXDV7icOqqiSdgxSdtUSv59Ef1ZdHgvvsb3aqzMC5btVQPi4kIys0ST1Tr1
pMWBY+UgvH0xYm3gvTR+W6jjDlkVZEH2alkmcinfr+uC1tm9DDqK2HA17Pd5yZ5z
HNdT76lCzf9iqRF5F8HUvUt+PIp76dNNxAt2qpB6APqAuJTojyguxXHDbY/0kzs=
=UvLi
-----END PGP SIGNATURE-----
Merge tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing changes from Steven Rostedt:
"The majority of the changes here are cleanups for the large changes
that were added to 3.10, which includes several bug fixes that have
been marked for stable.
As for new features, there were a few, but nothing to write to LWN
about. These include:
New function trigger called "dump" and "cpudump" that will cause
ftrace to dump its buffer to the console when the function is called.
The difference between "dump" and "cpudump" is that "dump" will dump
the entire contents of the ftrace buffer, where as "cpudump" will only
dump the contents of the ftrace buffer for the CPU that called the
function.
Another small enhancement is a new sysctl switch called
"traceoff_on_warning" which, when enabled, will disable tracing if any
WARN_ON() is triggered. This is useful if you want to debug what
caused a warning and do not want to risk losing your trace data by the
ring buffer overwriting the data before you can disable it. There's
also a kernel command line option that will make this enabled at boot
up called the same thing"
* tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (34 commits)
tracing: Make tracing_open_generic_{tr,tc}() static
tracing: Remove ftrace() function
tracing: Remove TRACE_EVENT_TYPE enum definition
tracing: Make tracer_tracing_{off,on,is_on}() static
tracing: Fix irqs-off tag display in syscall tracing
uprobes: Fix return value in error handling path
tracing: Fix race between deleting buffer and setting events
tracing: Add trace_array_get/put() to event handling
tracing: Get trace_array ref counts when accessing trace files
tracing: Add trace_array_get/put() to handle instance refs better
tracing: Protect ftrace_trace_arrays list in trace_events.c
tracing: Make trace_marker use the correct per-instance buffer
ftrace: Do not run selftest if command line parameter is set
tracing/kprobes: Don't pass addr=ip to perf_trace_buf_submit()
tracing: Use flag buffer_disabled for irqsoff tracer
tracing/kprobes: Turn trace_probe->files into list_head
tracing: Fix disabling of soft disable
tracing: Add missing syscall_metadata comment
tracing: Simplify code for showing of soft disabled flag
tracing/kprobes: Kill probe_enable_lock
...
I have patches that will use tracing_open_generic_tr/tc() in other
files, but as they are not ready to be merged yet, and Fengguang Wu's
sparse scripts pointed out that these functions were not declared
anywhere, I'll make them static for now.
When these functions are required to be used elsewhere, I'll remove
the static then.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I have patches that will use tracer_tracing_on/off/is_on() in other
files, but as they are not ready to be merged yet, and Fengguang Wu's
sparse scripts pointed out that these functions were not declared
anywhere, I'll make them static for now.
When these functions are required to be used elsewhere, I'll remove
the static then.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a trace file is opened that may access a trace array, it must
increment its ref count to prevent it from being deleted.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit a695cb5816 "tracing: Prevent deleting instances when they are being read"
tried to fix a race between deleting a trace instance and reading contents
of a trace file. But it wasn't good enough. The following could crash the kernel:
# cd /sys/kernel/debug/tracing/instances
# ( while :; do mkdir foo; rmdir foo; done ) &
# ( while :; do cat foo/trace &> /dev/null; done ) &
Luckily this can only be done by root user, but it should be fixed regardless.
The problem is that a delete of the file can happen after the reader starts
to open the file but before it grabs the trace_types_mutex.
The solution is to validate the trace array before using it. If the trace
array does not exist in the list of trace arrays, then it returns -ENODEV.
There's a possibility that a trace_array could be deleted and a new one
created and the open would open its file instead. But that is very minor as
it will just return the data of the new trace array, it may confuse the user
but it will not crash the system. As this can only be done by root anyway,
the race will only occur if root is deleting what its trying to read at
the same time.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are multiple places where the ftrace_trace_arrays list is accessed in
trace_events.c without the trace_types_lock held.
Link: http://lkml.kernel.org/r/1372732674-22726-1-git-send-email-azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_marker file was present for each new instance created, but it
added the trace mark to the global trace buffer instead of to
the instance's buffer.
Link: http://lkml.kernel.org/r/1372717885-4543-2-git-send-email-azl@google.com
Cc: David Sharp <dhsharp@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ring buffer is disabled and the irqsoff tracer records a trace it
will clear out its buffer and lose the data it had previously recorded.
Currently there's a callback when writing to the tracing_of file, but if
tracing is disabled via the function tracer trigger, it will not inform
the irqsoff tracer to stop recording.
By using the "mirror" flag (buffer_disabled) in the trace_array, that keeps
track of the status of the trace_array's buffer, it gives the irqsoff
tracer a fast way to know if it should record a new trace or not.
The flag may be a little behind the real state of the buffer, but it
should not affect the trace too much. It's more important for the irqsoff
tracer to be fast.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a traceoff_on_warning option in both the kernel command line as well
as a sysctl option. When set, any WARN*() function that is hit will cause
the tracing_on variable to be cleared, which disables writing to the
ring buffer.
This is useful especially when tracing a bug with function tracing. When
a warning is hit, the print caused by the warning can flood the trace with
the functions that producing the output for the warning. This can make the
resulting trace useless by either hiding where the bug happened, or worse,
by overflowing the buffer and losing the trace of the bug totally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 4f271a2a60
(tracing: Add a proc file to stop tracing and free buffer)
implement a method to free up ring buffer in kernel memory
in the release code path of free_buffer's fd.
Then we don't need read/write support for free_buffer,
indeed we just have a dummy write fop, and don't implement read fop.
So the 0200 is more reasonable file mode for free_buffer than
the current file mode 0644.
Link: http://lkml.kernel.org/r/20130526085201.GA3183@udknight
Acked-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Acked-by: David Sharp <dhsharp@google.com>
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Outputting formats of x86-tsc and counter should be a raw format, but after
applying the patch(2b6080f28c), the format was
changed to nanosec. This is because the global variable trace_clock_id was used.
When we use multiple buffers, clock_id of each sub-buffer should be used. Then,
this patch uses tr->clock_id instead of the global variable trace_clock_id.
[ Basically, this fixes a regression where the multibuffer code changed the
trace_clock file to update tr->clock_id but the traces still use the old
global trace_clock_id variable, negating the file's effect. The global
trace_clock_id variable is obsolete and removed. - SR ]
Link: http://lkml.kernel.org/r/20130423013239.22334.7394.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.
When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.
During testing, this RCU lockdep dump appeared:
[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021] #0: (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021] [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021] [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021] [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021] [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021] [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021] [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021] [<ffffffff8154bdca>] int_signal+0x12/0x17
What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.
The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).
As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.
This fixes the RCU suspicious splat.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If ftrace=<tracer> is on the kernel command line, when that tracer is
registered, it will be initiated by tracing_set_tracer() to execute that
tracer.
The nop tracer is just a stub tracer that is used to have no tracer
enabled. It is assigned at early bootup as it is the default tracer.
But if ftrace=nop is on the kernel command line, the registering of the
nop tracer will call tracing_set_tracer() which will try to execute
the nop tracer. But it expects tr->current_trace to be assigned something
as it usually is assigned to the nop tracer. As it hasn't been assigned
to anything yet, it causes the system to crash.
The simple fix is to move the tr->current_trace = nop before registering
the nop tracer. The functionality is still the same as the nop tracer
doesn't do anything anyway.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
During the 3.10 merge, a conflict happened and the resolution was
almost, but not quite, correct. An if statement was reversed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ Duh. That was just silly of me - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few years.
I even heard that Google was about to implement it themselves. I finally
had time and cleaned up the code such that you can now create multiple
instances of the ftrace buffer and have different events go to different
buffers. This way, a low frequency event will not be lost in the noise
of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie. function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will make
it easier to interleave the perf and ftrace data for analysis.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRfnTPAAoJEOdOSU1xswtMqYYH/1WIdrwXmxHflErnYkCIr3sU
QtYae2K5A1HcgiqOvRJrdWMOt016iMx5CaQQyBFM1vvMiPY0sTWRmwNxDfZzz9LN
10jRvWEzZSLtzl+a9mkFWLEpr5nR/QODOxkWFCnRWscp46sp04LSTxGDYsOnPQZB
sam/AQ1h4xA+DqDBChm9BDEUEPorGleTlN54LBaCGgSFGvrbF+eAg2s4vHNAQAvQ
8d5xjSE9zC7J+FqbVxvJTbKI3+EqKL6hMsJKsKfi0SI+FuxBaFMSltXck5zKyTI4
HpNJzXCmw+v90Tju7oMkPHh6RTbESPCHoGU+wqE52fM6m7oScVeuI/kfc6USwU4=
=W1n+
-----END PGP SIGNATURE-----
Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few
years. I even heard that Google was about to implement it themselves.
I finally had time and cleaned up the code such that you can now
create multiple instances of the ftrace buffer and have different
events go to different buffers. This way, a low frequency event will
not be lost in the noise of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will
make it easier to interleave the perf and ftrace data for analysis."
* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
tracepoints: Prevent null probe from being added
tracing: Compare to 1 instead of zero for is_signed_type()
tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
ftrace: Get rid of ftrace_profile_bits
tracing: Check return value of tracing_init_dentry()
tracing: Get rid of unneeded key calculation in ftrace_hash_move()
tracing: Reset ftrace_graph_filter_enabled if count is zero
tracing: Fix off-by-one on allocating stat->pages
kernel: tracing: Use strlcpy instead of strncpy
tracing: Update debugfs README file
tracing: Fix ftrace_dump()
tracing: Rename trace_event_mutex to trace_event_sem
tracing: Fix comment about prefix in arch_syscall_match_sym_name()
tracing: Convert trace_destroy_fields() to static
tracing: Move find_event_field() into trace_events.c
tracing: Use TRACE_MAX_PRINT instead of constant
tracing: Use pr_warn_once instead of open coded implementation
ring-buffer: Add ring buffer startup selftest
tracing: Bring Documentation/trace/ftrace.txt up to date
tracing: Add "perf" trace_clock
...
Conflicts:
kernel/trace/ftrace.c
kernel/trace/trace.c
Use strlcpy() instead of strncpy() as it will always add a '\0'
to the end of the string even if the buffer is smaller than what
is being copied.
Link: http://lkml.kernel.org/r/51624254.30301@asianux.com
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The commit 34600f0e9 "tracing: Fix race with max_tr and changing tracers"
fixed the updating of the main buffers with the race of changing
tracers, but left out the fix to the updating of just a per cpu buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For NUL terminated string we always need to set '\0' at the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: rostedt@goodmis.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/51624254.30301@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Update the README file in debugfs/tracing to something more useful.
What's currently in the file is very old and what it shows doesn't
have much use. Heck, it tells you how to mount debugfs! But to read
this file you would have already needed to mount it.
Replace the file with current up-to-date information. It's rather
limited, but what do you expect from a pseudo README file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_dump() had a lot of issues. What ftrace_dump() does, is when
ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it
will dump out the ftrace buffers to the console when either a oops,
panic, or a sysrq-z occurs.
This was written a long time ago when ftrace was fragile to recursion.
But it wasn't written well even for that.
There's a possible deadlock that can occur if a ftrace_dump() is happening
and an NMI triggers another dump. This is because it grabs a lock
before checking if the dump ran.
It also totally disables ftrace, and tracing for no good reasons.
As the ring_buffer now checks if it is read via a oops or NMI, where
there's a chance that the buffer gets corrupted, it will disable
itself. No need to have ftrace_dump() do the same.
ftrace_dump() is now cleaned up where it uses an atomic counter to
make sure only one dump happens at a time. A simple atomic_inc_return()
is enough that is needed for both other CPUs and NMIs. No need for
a spinlock, as if one CPU is running the dump, no other CPU needs
to do it too.
The tracing_on variable is turned off and not turned on. The original
code did this, but it wasn't pretty. By just disabling this variable
we get the result of not seeing traces that happen between crashes.
For sysrq-z, it doesn't get turned on, but the user can always write
a '1' to the tracing_on file. If they are using sysrq-z, then they should
know about tracing_on.
The new code is much easier to read and less error prone. No more
deadlock possibility when an NMI triggers here.
Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
TRACE_MAX_PRINT macro is defined, but is not used.
Link: http://lkml.kernel.org/r/513D8421.4070404@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use pr_warn_once, instead of making an open coded implementation.
Link: http://lkml.kernel.org/r/513D8419.20400@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function trace_clock() calls "local_clock()" which is exactly
the same clock that perf uses. I'm not sure why perf doesn't call
trace_clock(), as trace_clock() doesn't have any users.
But now it does. As trace_clock() calls local_clock() like perf does,
I added the trace_clock "perf" option that uses trace_clock().
Now the ftrace buffers can use the same clock as perf uses. This
will be useful when perf starts reading the ftrace buffers, and will
be able to interleave them with the same clock data.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a simple trace clock called "uptime" for those that are
interested in the uptime of the trace. It uses jiffies as that's
the safest method, as other uptime clocks grab seq locks, which could
cause a deadlock if taken from an event or function tracer.
Requested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the only way to stop the latency tracers from doing function
tracing is to fully disable the function tracer from the proc file
system:
echo 0 > /proc/sys/kernel/ftrace_enabled
This is a big hammer approach as it disables function tracing for
all users. This includes kprobes, perf, stack tracer, etc.
Instead, create a function-trace option that the latency tracers can
check to determine if it should enable function tracing or not.
This option can be set or cleared even while the tracer is active
and the tracers will disable or enable function tracing depending
on how the option was set.
Instead of using the proc file, disable latency function tracing with
echo 0 > /debug/tracing/options/function-trace
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Altough the trace_dump_stack() already skips three functions in
the call to stack trace, which gets the stack trace to start
at the caller of the function, the caller may want to skip some
more too (as it may have helper functions).
Add a skip argument to the trace_dump_stack() that lets the caller
skip back tracing functions that it doesn't care about.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
echo 'schedule:snapshot:1' > /debug/tracing/set_ftrace_filter
This will cause the scheduler to trigger a snapshot the next time
it's called (you can use any function that's not called by NMI).
Even though it triggers only once, you still need to remove it with:
echo '!schedule:snapshot:0' > /debug/tracing/set_ftrace_filter
The :1 can be left off for the first command:
echo 'schedule:snapshot' > /debug/tracing/set_ftrace_filter
But this will cause all calls to schedule to trigger a snapshot.
This must be removed without the ':0'
echo '!schedule:snapshot' > /debug/tracing/set_ftrace_filter
As adding a "count" is a different operation (internally).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add alloc_snapshot() and free_snapshot() to allocate and free the
snapshot buffer respectively, and use these to remove duplicate
code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add EXPORT_SYMBOL_GPL() to let the tracing_snapshot() functions be
called from modules.
Also add a test to see if the snapshot was called from NMI context
and just warn in the tracing buffer if so, and return.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a few places that ftrace uses trace_printk() for internal
use, but this requires context (normal, softirq, irq, NMI) buffers
to keep things lockless. But the trace_puts() does not, as it can
write the string directly into the ring buffer. Make a internal helper
for trace_puts() and have the internal functions use that.
This way the extra context buffers are not used.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_printk() is extremely fast and is very handy as it can be
used in any context (including NMIs!). But it still requires scanning
the fmt string for parsing the args. Even the trace_bprintk() requires
a scan to know what args will be saved, although it doesn't copy the
format string itself.
Several times trace_printk() has no args, and wastes cpu cycles scanning
the fmt string.
Adding trace_puts() allows the developer to use an even faster
tracing method that only saves the pointer to the string in the
ring buffer without doing any format parsing at all. This will
help remove even more of the "Heisenbug" effect, when debugging.
Also fixed up the F_printk()s for the ftrace internal bprint and print events.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If debugging the kernel, and the developer wants to use
tracing_snapshot() in places where tracing_snapshot_alloc() may
be difficult (or more likely, the developer is lazy and doesn't
want to bother with tracing_snapshot_alloc() at all), then adding
alloc_snapshot
to the kernel command line parameter will tell ftrace to allocate
the snapshot buffer (if configured) when it allocates the main
tracing buffer.
I also noticed that ring_buffer_expanded and tracing_selftest_disabled
had inconsistent use of boolean "true" and "false" with "0" and "1".
I cleaned that up too.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the tracing startup selftest code into its own function and
when not enabled, always have that function succeed.
This makes the register_tracer() function much more readable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new snapshot feature is quite handy. It's a way for the user
to take advantage of the spare buffer that, until then, only
the latency tracers used to "snapshot" the buffer when it hit
a max latency. Now users can trigger a "snapshot" manually when
some condition is hit in a program. But a snapshot currently can
not be triggered by a condition inside the kernel.
With the addition of tracing_snapshot() and tracing_snapshot_alloc(),
snapshots can now be taking when a condition is hit, and the
developer wants to snapshot the case without stopping the trace.
Note, any snapshot will overwrite the old one, so take care
in how this is done.
These new functions are to be used like tracing_on(), tracing_off()
and trace_printk() are. That is, they should never be called
in the mainline Linux kernel. They are solely for the purpose
of debugging.
The tracing_snapshot() will not allocate a buffer, but it is
safe to be called from any context (except NMIs). But if a
snapshot buffer isn't allocated when it is called, it will write
to the live buffer, complaining about the lack of a snapshot
buffer, and then stop tracing (giving you the "permanent snapshot").
tracing_snapshot_alloc() will allocate the snapshot buffer if
it was not already allocated and then take the snapshot. This routine
*may sleep*, and must be called from context that can sleep.
The allocation is done with GFP_KERNEL and not atomic.
If you need a snapshot in an atomic context, say in early boot,
then it is best to call the tracing_snapshot_alloc() before then,
where it will allocate the buffer, and then you can use the
tracing_snapshot() anywhere you want and still get snapshots.
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a ref count to the trace_array structure and prevent removal
of instances that have open descriptors.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the per_cpu directory to the created tracing instances:
cd /sys/kernel/debug/tracing/instances
mkdir foo
ls foo/per_cpu/cpu0
buffer_size_kb snapshot_raw trace trace_pipe_raw
snapshot stats trace_pipe
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "snapshot" file to the the multi-buffer instances.
cd /sys/kernel/debug/tracing/instances
mkdir foo
ls foo
buffer_size_kb buffer_total_size_kb events free_buffer set_event
snapshot trace trace_clock trace_marker trace_options trace_pipe
tracing_on
cat foo/snapshot
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bit of duplicate code in creating the trace buffers for
the normal trace buffer and the max trace buffer among the instances
and the main global_trace. This code can be consolidated and cleaned
up a bit making the code cleaner and more readable as well as less
duplication.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The snapshot buffer belongs to the trace array not the tracer that is
running. The trace array should be the data structure that keeps track
of whether or not the snapshot buffer is allocated, not the tracer
desciptor. Having the trace array keep track of it makes modifications
so much easier.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'snapshot_raw' per_cpu file that allows tools to read the raw
binary data of the snapshot buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the snapshot file into the per_cpu tracing directories to allow
them to be read for an individual cpu. This also allows to clear
an individual cpu from the snapshot buffer.
If the kernel allows it (CONFIG_RING_BUFFER_ALLOW_SWAP is set), then
echoing in '1' into one of the per_cpu snapshot files will do an
individual cpu buffer swap instead of the entire file.
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.
The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.
This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.
The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we do not know what buffer a module event was enabled in.
On unload, it is safest to clear all buffer instances, not just the
top level buffer.
Todo: Clear only the buffer that the event was used in. The
infrastructure is there to do this, but it makes the code a bit
more complex. Lets get the current code vetted before we add that.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the logic to wake up on ring buffer data into the ring buffer
code itself. This simplifies the tracing code a lot and also has the
added benefit that waiters on one of the instance buffers can be woken
only when data is added to that instance instead of data added to
any instance.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ring buffer is empty, a read to trace_pipe_raw wont block.
The tracing code has the infrastructure to wake up waiting readers,
but the trace_pipe_raw doesn't take advantage of that.
When a read is done to trace_pipe_raw without the O_NONBLOCK flag
set, have the read block until there's data in the requested buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_pipe_raw never implemented polling and this was casing
issues for several utilities. This is now implemented.
Blocked reads still are on the TODO list.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently only the splice NONBLOCK flag is checked to determine if
the splice read should block or not. But the file descriptor NONBLOCK
flag also needs to be checked.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a method to the hijacked dentry descriptor of the
"instances" directory to allow for rmdir to remove an
instance of a multibuffer.
Example:
cd /debug/tracing/instances
mkdir hello
ls
hello/
rmdir hello
ls
Like the mkdir method, the i_mutex is dropped for the instances
directory. The instances directory is created at boot up and can
not be renamed or removed. The trace_types_lock mutex is used to
synchronize adding and removing of instances.
I've run several stress tests with different threads trying to
create and delete directories of the same name, and it has stood
up fine.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the interface ("instances" directory) to add multiple buffers
to ftrace. To create a new instance, simply do a mkdir in the
instances directory:
This will create a directory with the following:
# cd instances
# mkdir foo
# ls foo
buffer_size_kb free_buffer trace_clock trace_pipe
buffer_total_size_kb set_event trace_marker tracing_enabled
events/ trace trace_options tracing_on
Currently only events are able to be set, and there isn't a way
to delete a buffer when one is created (yet).
Note, the i_mutex lock is dropped from the parent "instances"
directory during the mkdir operation. As the "instances" directory
can not be renamed or deleted (created on boot), I do not see
any harm in dropping the lock. The creation of the sub directories
is protected by trace_types_lock mutex, which only lets one
instance get into the code path at a time. If two tasks try to
create or delete directories of the same name, only one will occur
and the other will fail with -EEXIST.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pass the struct ftrace_event_file *ftrace_file to the
trace_event_buffer_lock_reserve() (new function that replaces the
trace_current_buffer_lock_reserver()).
The ftrace_file holds a pointer to the trace_array that is in use.
In the case of multiple buffers with different trace_arrays, this
allows different events to be recorded into different buffers.
Also fixed some of the stale comments in include/trace/ftrace.h
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global_trace variable in kernel/trace/trace.c has been kept 'static' and
local to that file so that it would not be used too much outside of that
file. This has paid off, even though there were lots of changes to make
the trace_array structure more generic (not depending on global_trace).
Removal of a lot of direct usages of global_trace is needed to be able to
create more trace_arrays such that we can add multiple buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both RING_BUFFER_ALL_CPUS and TRACE_PIPE_ALL_CPU are defined as
-1 and used to say that all the ring buffers are to be modified
or read (instead of just a single cpu, which would be >= 0).
There's no reason to keep TRACE_PIPE_ALL_CPU as it is also started
to be used for more than what it was created for, and now that
the ring buffer code added a generic RING_BUFFER_ALL_CPUS define,
we can clean up the trace code to use that instead and remove
the TRACE_PIPE_ALL_CPU macro.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).
By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.
Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.
Keep the two buffers overwrite modes in sync.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.
Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.
Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.
New code is coming soon that will allow for this race to trigger.
I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To use the tracing snapshot feature, writing a '1' into the snapshot
file causes the snapshot buffer to be allocated if it has not already
been allocated and dose a 'swap' with the main buffer, so that the
snapshot now contains what was in the main buffer, and the main buffer
now writes to what was the snapshot buffer.
To free the snapshot buffer, a '0' is written into the snapshot file.
To clear the snapshot buffer, any number but a '0' or '1' is written
into the snapshot file. But if the file is not allocated it returns
-EINVAL error code. This is rather pointless. It is better just to
do nothing and return success.
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When cat'ing the snapshot file, instead of showing an empty trace
header like the trace file does, show how to use the snapshot
feature.
Also, this is a good place to show if the snapshot has been allocated
or not. Users may want to "pre allocate" the snapshot to have a fast
"swap" of the current buffer. Otherwise, a swap would be slow and might
fail as it would need to allocate the snapshot buffer, and that might
fail under tight memory constraints.
Here's what it looked like before:
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Here's what it looks like now:
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull scheduler changes from Ingo Molnar:
"Main changes:
- scheduler side full-dynticks (user-space execution is undisturbed
and receives no timer IRQs) preparation changes that convert the
cputime accounting code to be full-dynticks ready, from Frederic
Weisbecker.
- Initial sched.h split-up changes, by Clark Williams
- select_idle_sibling() performance improvement by Mike Galbraith:
" 1 tbench pair (worst case) in a 10 core + SMT package:
pre 15.22 MB/sec 1 procs
post 252.01 MB/sec 1 procs "
- sched_rr_get_interval() ABI fix/change. We think this detail is not
used by apps (so it's not an ABI in practice), but lets keep it
under observation.
- misc RT scheduling cleanups, optimizations"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h>
cputime: Remove irqsave from seqlock readers
sched, powerpc: Fix sched.h split-up build failure
cputime: Restore CPU_ACCOUNTING config defaults for PPC64
sched/rt: Move rt specific bits into new header file
sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice
sched: Move sched.h sysctl bits into separate header
sched: Fix signedness bug in yield_to()
sched: Fix select_idle_sibling() bouncing cow syndrome
sched/rt: Further simplify pick_rt_task()
sched/rt: Do not account zero delta_exec in update_curr_rt()
cputime: Safely read cputime of full dynticks CPUs
kvm: Prepare to add generic guest entry/exit callbacks
cputime: Use accessors to read task cputime stats
cputime: Allow dynamic switch between tick/virtual based cputime accounting
cputime: Generic on-demand virtual cputime accounting
cputime: Move default nsecs_to_cputime() to jiffies based cputime file
cputime: Librarize per nsecs resolution cputime definitions
cputime: Avoid multiplication overflow on utime scaling
context_tracking: Export context state for generic vtime
...
Fix up conflict in kernel/context_tracking.c due to comment additions.
Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On early boot up, when the ftrace ring buffer is initialized, the
static variable current_trace is initialized to &nop_trace.
Before this initialization, current_trace is NULL and will never
become NULL again. It is always reassigned to a ftrace tracer.
Several places check if current_trace is NULL before it uses
it, and this check is frivolous, because at the point in time
when the checks are made the only way current_trace could be
NULL is if ftrace failed its allocations at boot up, and the
paths to these locations would probably not be possible.
By initializing current_trace to &nop_trace where it is declared,
current_trace will never be NULL, and we can remove all these
checks of current_trace being NULL which never needed to be
checked in the first place.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.
Add "snapshot" debugfs file in "tracing" directory.
snapshot:
This is used to take a snapshot and to read the output of the
snapshot.
# echo 1 > snapshot
This will allocate the spare buffer for snapshot (if it is
not allocated), and take a snapshot.
# cat snapshot
This will show contents of the snapshot.
# echo 0 > snapshot
This will free the snapshot if it is allocated.
Any other positive values will clear the snapshot contents if
the snapshot is allocated, or return EINVAL if it is not allocated.
Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
Fixed irqsoff selftest and also a conflict with a change
that fixes the update_max_tr.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the trace buffer read functions use a static variable
"old_tracer" for detecting if the current tracer changes. This
was suitable for a single trace file ("trace"), but to add a
snapshot feature that will use the same function for its file,
a check against a static variable is not sufficient.
To use the output functions for two different files, instead of
storing the current tracer in a static variable, as the trace
iterator descriptor contains a pointer to the original current
tracer's name, that pointer can now be used to check if the
current tracer has changed between different reads of the trace
file.
Link: http://lkml.kernel.org/r/20121226025252.3252.9276.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a stat about the number of events read from the ring buffer:
# cat /debug/tracing/per_cpu/cpu0/stats
entries: 39869
overrun: 870512
commit overrun: 0
bytes: 1449912
oldest event ts: 6561.368690
now ts: 6565.246426
dropped events: 0
read events: 112 <-- Added
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__this_cpu_inc_return() or __this_cpu_dec generates a single instruction,
which is faster than __get_cpu_var operation.
Link: http://lkml.kernel.org/r/50A9C1BD.1060308@gmail.com
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a race condition between the setting of a new tracer and
the update of the max trace buffers (the swap). When a new tracer
is added, it sets current_trace to nop_trace before disabling
the old tracer. At this moment, if the old tracer uses update_max_tr(),
the update may trigger the warning against !current_trace->use_max-tr,
as nop_trace doesn't have that set.
As update_max_tr() requires that interrupts be disabled, we can
add a check to see if current_trace == nop_trace and bail if it
does. Then when disabling the current_trace, set it to nop_trace
and run synchronize_sched(). This will make sure all calls to
update_max_tr() have completed (it was called with interrupts disabled).
As a clean up, this commit also removes shrinking and recreating
the max_tr buffer if the old and new tracers both have use_max_tr set.
The old way use to always shrink the buffer, and then expand it
for the next tracer. This is a waste of time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Due to a userspace issue with PowerTop v2beta, which hardcoded
the offset of event fields that it was using, it broke when
we removed the Big Kernel Lock counter from the event header.
(commit e6e1e2593 "tracing: Remove lock_depth from event entry")
Because this broke userspace, it was determined that we must
keep those 4 bytes around.
(commit a3a4a5acd "Regression: partial revert "tracing: Remove lock_depth from event entry"")
This unfortunately wastes space in the ring buffer. 4 bytes per
event, where a lot of events are just 24 bytes. That's 16% of the
buffer wasted. A million events will add 4 megs of white space
into the buffer.
It was later noticed that PowerTop v2beta could not work on systems
where the kernel was 64 bit but the userspace was 32 bits.
The reason was because the offsets are different between the
two and the hard coded offset of one would not work with the other.
With PowerTop v2 final, it implemented the same interface that both
perf and trace-cmd use. That is, it reads the format file of
the event to find the offsets of the fields it needs. This fixes
the problem with running powertop on a 32 bit userspace running
on a 64 bit kernel. It also no longer requires the 4 byte padding.
As PowerTop v2 has been out for a while, and is included in all
major distributions, it is time that we can safely remove the
4 bytes of padding. Users of PowerTop v2beta should upgrade to
PowerTop v2 final.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's now a check in tracing_reset_online_cpus() if the buffer is
allocated or NULL. No need to do a check before calling it with max_tr.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
max_tr->buffer could be NULL in the tracing_reset{_online_cpus}. In this
case, a NULL pointer dereference happens, so we should return immediately
from these functions.
Note, the current code does not call tracing_reset*() with max_tr when
its buffer is NULL, but future code will. This patch is needed to prevent
the future code from crashing.
Link: http://lkml.kernel.org/r/20121219070234.31200.93863.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
typeof(&buffer) is a pointer to array of 1024 char, or char (*)[1024].
But, typeof(&buffer[0]) is a pointer to char which match the return type of get_trace_buf().
As well-known, the value of &buffer is equal to &buffer[0].
so return this_cpu_ptr(&percpu_buffer->buffer[0]) can avoid type cast.
Link: http://lkml.kernel.org/r/50A1A800.3020102@gmail.com
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 0fb9656d "tracing: Make tracing_enabled be equal to tracing_on"
changes the behaviour of trace_pipe, ie. it makes trace_pipe return if
we've read something and tracing is enabled, and this means that we have
to 'cat trace_pipe' again and again while running tests.
IMO the right way is if tracing is enabled, we always block and wait for
ring buffer, or we may lose what we want since ring buffer's size is limited.
Link: http://lkml.kernel.org/r/1358132051-5410-1-git-send-email-bo.li.liu@oracle.com
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 02404baf1b "tracing: Remove deprecated tracing_enabled file"
removed the tracing_enabled file as it never worked properly and
the tracing_on file should be used instead. But the tracing_on file
didn't call into the tracers start/stop routines like the
tracing_enabled file did. This caused trace-cmd to break when it
enabled the irqsoff tracer.
If you just did "echo irqsoff > current_tracer" then it would work
properly. But the tool trace-cmd disables tracing first by writing
"0" into the tracing_on file. Then it writes "irqsoff" into
current_tracer and then writes "1" into tracing_on. Unfortunately,
the above commit changed the irqsoff tracer to check the tracing_on
status instead of the tracing_enabled status. If it's disabled then
it does not start the tracer internals.
The problem is that writing "1" into tracing_on does not call the
tracers "start" routine like writing "1" into tracing_enabled did.
This makes the irqsoff tracer not start when using the trace-cmd
tool, and is a regression for userspace.
Simple fix is to have the tracing_on file call the tracers start()
method when being enabled (and the stop() method when disabled).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latest change to allow trace options to be set on the command
line also broke the trace_options file.
The zeroing of the last byte of the option name that is echoed into
the trace_option file was removed with the consolidation of some
of the code. The compare between the option and what was written to
the trace_options file fails because the string holding the data
written doesn't terminate with a null character.
A zero needs to be added to the end of the string copied from
user space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull minor tracing updates and fixes from Steven Rostedt:
"It seems that one of my old pull requests have slipped through.
The changes are contained to just the files that I maintain, and are
changes from others that I told I would get into this merge window.
They have already been in linux-next for several weeks, and should be
well tested."
* 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove unnecessary WARN_ONCE's from tracing_buffers_splice_read
tracing: Remove unneeded checks from the stack tracer
tracing: Add a resize function to make one buffer equivalent to another buffer
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.
Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
WARN shouldn't be used as a means of communicating failure to a userspace programmer.
Link: http://lkml.kernel.org/r/20120725153908.GA25203@redhat.com
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace buffer size is now per-cpu, so that there are the following two
patterns in resizing of buffers.
(1) resize per-cpu buffers to same given size
(2) resize per-cpu buffers to another trace_array's buffer size
for each CPU (such as preparing the max_tr which is equivalent
to the global_trace's size)
__tracing_resize_ring_buffer() can be used for (1), and had
implemented (2) inside it for resetting the global_trace to the
original size.
(2) was also implemented in another place. So this patch assembles
them in a new function - resize_buffer_duplicate_size().
Link: http://lkml.kernel.org/r/20121017025616.2627.91226.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Show raw time stamp values for stats per cpu if you choose counter or tsc mode
for trace_clock. Although a unit of tracing time stamp is nsec in local or global mode,
the units in counter and TSC mode are tracing counter and cycles respectively.
Link: http://lkml.kernel.org/r/1352837903-32191-3-git-send-email-dhsharp@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to promote interoperability between userspace tracers and ftrace,
add a trace_clock that reports raw TSC values which will then be recorded
in the ring buffer. Userspace tracers that also record TSCs are then on
exactly the same time base as the kernel and events can be unambiguously
interlaced.
Tested: Enabled a tracepoint and the "tsc" trace_clock and saw very large
timestamp values.
v2:
Move arch-specific bits out of generic code.
v3:
Rename "x86-tsc", cleanups
v7:
Generic arch bits in Kbuild.
Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1352837903-32191-1-git-send-email-dhsharp@google.com
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add trace_options to the kernel command line parameter to be able to
set options at early boot. For example, to enable stack dumps of
events, add the following:
trace_options=stacktrace
This along with the trace_event option, you can get not only
traces of the events but also the stack dumps with them.
Requested-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Have the ring buffer commit function use the irq_work infrastructure to
wake up any waiters waiting on the ring buffer for new data. The irq_work
was created for such a purpose, where doing the actual wake up at the
time of adding data is too dangerous, as an event or function trace may
be in the midst of the work queue locks and cause deadlocks. The irq_work
will either delay the action to the next timer interrupt, or trigger an IPI
to itself forcing an interrupt to do the work (in a safe location).
With irq_work, all ring buffer commits can safely do wakeups, removing
the need for the ring buffer commit "nowake" variants, which were used
by events and function tracing. All commits can now safely use the
normal commit, and the "nowake" variants can be removed.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file was used as a quick way to stop
tracers, and try to bring down overhead for things like
the latency tracers (irqsoff, wakeup, etc). But it didn't
work that well.
The tracing_on file was created as a really fast way to
stop recording into the ftrace ring buffer and can interact
with the kernel. That is a tracing_off() call in the kernel
can disable recording of events, and then from userspace one
could echo 1 into the tracing_on file to continue it. The
tracing_enabled function did too much to allow for this.
The tracing_on has taken over as a way to start and stop tracing
and the tracing_enabled file should not be used. But because of
its existance, it still confuses people. Over a year ago the
following commit was added:
commit 6752ab4a9c
Author: Steven Rostedt <srostedt@redhat.com>
Date: Tue Feb 8 13:54:06 2011 -0500
tracing: Deprecate tracing_enabled for tracing_on
This commit added a WARN_ON() if the tracing_enabled file's variable
was changed. After this was added, only LatencyTop complained, and
they soon fixed their tool as there was no reason that LatencyTop
should touch this file as it was using the perf ring buffers which
this file does not interact with. But since that time no one else
has complained about this WARN_ON(). Thus it is safe to assume that
this file is no longer needed. Time to get rid of it.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file has been deprecated as it never was able
to serve its purpose well. The tracing_on file has taken over.
Instead of having code to keep tracing_enabled, have the tracing_enabled
file just set tracing_on, and remove the tracing_enabled variable.
This allows us to remove the tracing_enabled file. The reason that
the remove is in a different change set and not removed here is
in case we find some lonely userspace tool that requires the file
to exist. Then the removal patch will get reverted, but this one
will not.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function register_tracer() is only used by kernel core code,
that never needs to remove the tracer. As trace_events have become
the main way to add new tracing to the kernel, the need to
unregister a tracer has diminished. Remove the unused function
unregister_tracer(). If a need arises where we need it, then we
can always add it back.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the "tsc" clock isn't in nanoseconds, the ring buffer must be
reset when changing clocks so that incomparable timestamps don't end up
in the same trace.
Tested: Confirmed switching clocks resets the trace buffer.
Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1349998076-15495-3-git-send-email-dhsharp@google.com
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.
Here's an example, if you enable the following events:
echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable
Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:
echo 0 > /debug/tracing/events/net/net_dev_xmit/enable
and look at the trace:
cat /debug/tracing/trace
sshd-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
sshd-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:
cat /debug/tracing/trace
<...>-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
<...>-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
The stored "sshd" comm has been flushed out and we get a useless "<...>".
But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If comm recording is not enabled when trace_printk() is used then
you just get this type of output:
[ adding trace_printk("hello! %d", irq); in do_IRQ ]
<...>-2843 [001] d.h. 80.812300: do_IRQ: hello! 14
<...>-2734 [002] d.h2 80.824664: do_IRQ: hello! 14
<...>-2713 [003] d.h. 80.829971: do_IRQ: hello! 14
<...>-2814 [000] d.h. 80.833026: do_IRQ: hello! 14
By enabling the comm recorder when trace_printk is enabled:
hackbench-6715 [001] d.h. 193.233776: do_IRQ: hello! 21
sshd-2659 [001] d.h. 193.665862: do_IRQ: hello! 21
<idle>-0 [001] d.h1 193.665996: do_IRQ: hello! 21
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.
This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.
On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.
Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com
Signed-off-by: Slava Pestov <slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull virtio changes from Rusty Russell:
"New workflow: same git trees pulled by linux-next get sent straight to
Linus. Git is awkward at shuffling patches compared with quilt or mq,
but that doesn't happen often once things get into my -next branch."
* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
lguest: fix occasional crash in example launcher.
virtio-blk: Disable callback in virtblk_done()
virtio_mmio: Don't attempt to create empty virtqueues
virtio_mmio: fix off by one error allocating queue
drivers/virtio/virtio_pci.c: fix error return code
virtio: don't crash when device is buggy
virtio: remove CONFIG_VIRTIO_RING
virtio: add help to CONFIG_VIRTIO option.
virtio: support reserved vqs
virtio: introduce an API to set affinity for a virtqueue
virtio-ring: move queue_index to vring_virtqueue
virtio_balloon: not EXPERIMENTAL any more.
virtio-balloon: dependency fix
virtio-blk: fix NULL checking in virtblk_alloc_req()
virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
virtio-blk: Add bio-based IO path for virtio-blk
virtio: console: fix error handling in init() function
tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
tools: Add guest trace agent as a user tool
virtio/console: Allocate scatterlist according to the current pipe size
...
Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.
The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.
The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.
Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.
Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.
While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.
Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.
After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."
Fix up some fairly trivial conflicts in netfilter uid/git logging code.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...
Use generic steal operation on pipe buffer to allow stealing
ring buffer's read page from pipe buffer.
Note that this could reduce the performance of splice on the
splice_write side operation without affinity setting.
Since the ring buffer's read pages are allocated on the
tracing-node, but the splice user does not always execute
splice write side operation on the same node. In this case,
the page will be accessed from the another node.
Thus, it is strongly recommended to assign the splicing
thread to corresponding node.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In our application, we have trace markers spread through user-space.
We have markers in GL, X, etc. These are super handy for Chrome's
about:tracing feature (Chrome + system + kernel trace view), but
can be very distracting when you're trying to debug a kernel issue.
I normally, use "grep -v tracing_mark_write" but it would be nice
if I could just temporarily disable markers all together.
Link: http://lkml.kernel.org/r/1347066739-26285-1-git-send-email-msb@chromium.org
CC: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- When tracing capture the kuid.
- When displaying the data to user space convert the kuid into the
user namespace of the process that opened the report file.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Here's the big staging tree merge for the 3.6-rc1 merge window.
There are some patches in here outside of drivers/staging/, notibly the iio
code (which is still stradeling the staging / not staging boundry), the pstore
code, and the tracing code. All of these have gotten ackes from the various
subsystem maintainers to be included in this tree. The pstore and tracing
patches are related, and are coming here as they replace one of the android
staging drivers.
Otherwise, the normal staging mess. Lots of cleanups and a few new drivers
(some iio drivers, and the large csr wireless driver abomination.)
Note, you will get a merge issue with the following files:
drivers/staging/comedi/drivers/s626.h
drivers/staging/gdm72xx/netlink_k.c
both of which should be trivial for you to handle.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAlAQiD8ACgkQMUfUDdst+ykxhgCeMUjvc+1RTtSprzvkzpejgoUU
6A4AnAleWMnkaCD8vruGnRdGl/Qtz51+
=mN6M
-----END PGP SIGNATURE-----
Merge tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree patches from Greg Kroah-Hartman:
"Here's the big staging tree merge for the 3.6-rc1 merge window.
There are some patches in here outside of drivers/staging/, notibly
the iio code (which is still stradeling the staging / not staging
boundry), the pstore code, and the tracing code. All of these have
gotten acks from the various subsystem maintainers to be included in
this tree. The pstore and tracing patches are related, and are coming
here as they replace one of the android staging drivers.
Otherwise, the normal staging mess. Lots of cleanups and a few new
drivers (some iio drivers, and the large csr wireless driver
abomination.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fixed up trivial conflicts in drivers/staging/comedi/drivers/s626.h and
drivers/staging/gdm72xx/netlink_k.c
* tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1108 commits)
staging: csr: delete a bunch of unused library functions
staging: csr: remove csr_utf16.c
staging: csr: remove csr_pmem.h
staging: csr: remove CsrPmemAlloc
staging: csr: remove CsrPmemFree()
staging: csr: remove CsrMemAllocDma()
staging: csr: remove CsrMemCalloc()
staging: csr: remove CsrMemAlloc()
staging: csr: remove CsrMemFree() and CsrMemFreeDma()
staging: csr: remove csr_util.h
staging: csr: remove CsrOffSetOf()
stating: csr: remove unneeded #includes in csr_util.c
staging: csr: make CsrUInt16ToHex static
staging: csr: remove CsrMemCpy()
staging: csr: remove CsrStrLen()
staging: csr: remove CsrVsnprintf()
staging: csr: remove CsrStrDup
staging: csr: remove CsrStrChr()
staging: csr: remove CsrStrNCmp
staging: csr: remove CsrStrCmp
...
If tracer->init() fails, current code will leave current_tracer pointing
to an unusable tracer, which at best makes 'current_tracer' report
inaccurate value.
Fix the issue by pointing current_tracer to nop tracer, and only update
current_tracer with the new one after all the initialization succeeds.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up and return -ENOMEM on if the kzalloc() fails.
This also prevents a potential crash, as the pointer that failed to
allocate would be later used.
Link: http://lkml.kernel.org/r/20120711063507.GF11812@elgon.mountain
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block bits from Jens Axboe:
"As vacation is coming up, thought I'd better get rid of my pending
changes in my for-linus branch for this iteration. It contains:
- Two patches for mtip32xx. Killing a non-compliant sysfs interface
and moving it to debugfs, where it belongs.
- A few patches from Asias. Two legit bug fixes, and one killing an
interface that is no longer in use.
- A patch from Jan, making the annoying partition ioctl warning a bit
less annoying, by restricting it to !CAP_SYS_RAWIO only.
- Three bug fixes for drbd from Lars Ellenberg.
- A fix for an old regression for umem, it hasn't really worked since
the plugging scheme was changed in 3.0.
- A few fixes from Tejun.
- A splice fix from Eric Dumazet, fixing an issue with pipe
resizing."
* 'for-linus' of git://git.kernel.dk/linux-block:
scsi: Silence unnecessary warnings about ioctl to partition
block: Drop dead function blk_abort_queue()
block: Mitigate lock unbalance caused by lock switching
block: Avoid missed wakeup in request waitqueue
umem: fix up unplugging
splice: fix racy pipe->buffers uses
drbd: fix null pointer dereference with on-congestion policy when diskless
drbd: fix list corruption by failing but already aborted reads
drbd: fix access of unallocated pages and kernel panic
xen/blkfront: Add WARN to deal with misbehaving backends.
blkcg: drop local variable @q from blkg_destroy()
mtip32xx: Create debugfs entries for troubleshooting
mtip32xx: Remove 'registers' and 'flags' from sysfs
blkcg: fix blkg_alloc() failure path
block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
block: fix return value on cfq_init() failure
mtip32xx: Remove version.h header file inclusion
xen/blkback: Copy id field when doing BLKIF_DISCARD.
Replace the NR_CPUS array of buffer_iter from the trace_iterator
with an allocated array. This will just create an array of
possible CPUS instead of the max number specified.
The use of NR_CPUS in that array caused allocation failures for
machines that were tight on memory. This did not cause any failures
to the system itself (no crashes), but caused unnecessary failures
for reading the trace files.
Added a helper function called 'trace_buffer_iter()' that returns
the buffer_iter item or NULL if it is not defined or the array was
not allocated. Some routines do not require the array
(tracing_open_pipe() for one).
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a WARN_ON() output on test failures so that they are easier to detect
in automated tests. Although, the WARN_ON() will not print if the test
causes the system to crash, obviously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered
by splice_shrink_spd() called from vmsplice_to_pipe()
commit 35f3d14dbb (pipe: add support for shrinking and growing pipes)
added capability to adjust pipe->buffers.
Problem is some paths don't hold pipe mutex and assume pipe->buffers
doesn't change for their duration.
Fix this by adding nr_pages_max field in struct splice_pipe_desc, and
use it in place of pipe->buffers where appropriate.
splice_shrink_spd() loses its struct pipe_inode_info argument.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tom Herbert <therbert@google.com>
Cc: stable <stable@vger.kernel.org> # 2.6.35
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A recent update to have tracing_on/off() only affect the ftrace ring
buffers instead of all ring buffers had a cut and paste error.
The tracing_off() did the exact same thing as tracing_on() and
would not actually turn off tracing. Unfortunately, tracing_off()
is more important to be working than tracing_on() as this is a key
development tool, as it lets the developer turn off tracing as soon
as a problem is discovered. It is also used by panic and oops code.
This bug also breaks the 'echo func:traceoff > set_ftrace_filter'
Cc: <stable@vger.kernel.org> # 3.4
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fixes for perf/core:
- Rename some perf_target methods to avoid double negation, from Namhyung Kim.
- Revert change to use per task events with inheritance, from Namhyung Kim.
- Events should start disabled till children starts running, from David Ahern.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure that the state of buffer_size_kb is initialized correctly and
returns actual size of the ring buffer.
Link: http://lkml.kernel.org/r/1336066834-1673-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Merge reason: We are going to queue up a dependent patch:
"perf tools: Move parse event automated tests to separated object"
That depends on:
commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing
Conflicts:
tools/perf/builtin-stat.c
Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to Documentation/trace/ftrace.txt:
tracing_cpumask:
This is a mask that lets the user only trace
on specified CPUS. The format is a hex string
representing the CPUS.
The tracing_cpumask currently doesn't affect the tracing state of
per-CPU ring buffers.
This patch enables/disables CPU recording as its corresponding bit in
tracing_cpumask is set/unset.
Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If tracing_dentry_percpu() failed, tracing_init_debugfs_percpu()
will try to create each cpu directories on debugfs' root directory
as d_percpu is NULL.
Link: http://lkml.kernel.org/r/1335143517-2285-1-git-send-email-namhyung.kim@lge.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the capability to remove pages from a ring buffer
without destroying any existing data in it.
This is done by removing the pages after the tail page. This makes sure
that first all the empty pages in the ring buffer are removed. If the
head page is one in the list of pages to be removed, then the page after
the removed ones is made the head page. This removes the oldest data
from the ring buffer and keeps the latest data around to be read.
To do this in a non-racey manner, tracing is stopped for a very short
time while the pages to be removed are identified and unlinked from the
ring buffer. The pages are freed after the tracing is restarted to
minimize the time needed to stop tracing.
The context in which the pages from the per-cpu ring buffer are removed
runs on the respective CPU. This minimizes the events not traced to only
NMI trace contexts.
Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On gcc 4.5 the function tracing_mark_write() would give a warning
of page2 being uninitialized. This is due to a bug in gcc because
the logic prevents page2 from being used uninitialized, and
gcc 4.6+ does not complain (correctly).
Instead of adding a "unitialized" around page2, which could show
a bug later on, I combined page1 and page2 into an array map_pages[].
This binds the two and the two are modified according to nr_pages
(what gcc 4.5 seems to ignore). This no longer gives a warning with
gcc 4.5 nor with gcc 4.6.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_disable_cpu() and ftrace_enable_cpu() functions were
needed back before the ring buffer was lockless. Now that the
ring buffer is lockless (and has been for some time), these functions
serve no purpose, and unnecessarily slow down operations of the tracer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's appropriate to use __seq_open_private interface to open
some of trace seq files, because it covers all steps we are
duplicating in tracing code - zallocating the iterator and
setting it as seq_file's private.
Using this for following files:
trace
available_filter_functions
enabled_functions
Link: http://lkml.kernel.org/r/1335342219-2782-5-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[
Fixed warnings for:
kernel/trace/trace.c: In function '__tracing_open':
kernel/trace/trace.c:2418:11: warning: unused variable 'ret' [-Wunused-variable]
kernel/trace/trace.c:2417:19: warning: unused variable 'm' [-Wunused-variable]
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a debugfs entry under per_cpu/ folder for each cpu called
buffer_size_kb to control the ring buffer size for each CPU
independently.
If the global file buffer_size_kb is used to set size, the individual
ring buffers will be adjusted to the given size. The buffer_size_kb will
report the common size to maintain backward compatibility.
If the buffer_size_kb file under the per_cpu/ directory is used to
change buffer size for a specific CPU, only the size of the respective
ring buffer is updated. When tracing/buffer_size_kb is read, it reports
'X' to indicate that sizes of per_cpu ring buffers are not equivalent.
Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Justin Teravest <teravest@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
memcpy() returns a pointer to "bug". Hopefully, it's not NULL here or
we would already have Oopsed.
Link: http://lkml.kernel.org/r/20120420063145.GA22649@elgon.mountain
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, trace_printk() uses a single buffer to write into
to calculate the size and format needed to save the trace. To
do this safely in an SMP environment, a spin_lock() is taken
to only allow one writer at a time to the buffer. But this could
also affect what is being traced, and add synchronization that
would not be there otherwise.
Ideally, using percpu buffers would be useful, but since trace_printk()
is only used in development, having per cpu buffers for something
never used is a waste of space. Thus, the use of the trace_bprintk()
format section is changed to be used for static fmts as well as dynamic ones.
Then at boot up, we can check if the section that holds the trace_printk
formats is non-empty, and if it does contain something, then we
know a trace_printk() has been added to the kernel. At this time
the trace_printk per cpu buffers are allocated. A check is also
done at module load time in case a module is added that contains a
trace_printk().
Once the buffers are allocated, they are never freed. If you use
a trace_printk() then you should know what you are doing.
A buffer is made for each type of context:
normal
softirq
irq
nmi
The context is checked and the appropriate buffer is used.
This allows for totally lockless usage of trace_printk(),
and they no longer even disable interrupts.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The change to make tracing_on affect only the ftrace ring buffer, caused
a bug where it wont affect any ring buffer. The problem was that the buffer
of the trace_array was passed to the write function and not the trace array
itself.
The trace_array can change the buffer when running a latency tracer. If this
happens, then the buffer being disabled may not be the buffer currently used
by ftrace. This will cause the tracing_on file to become useless.
The simple fix is to pass the trace_array to the write function instead of
the buffer. Then the actual buffer may be changed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When reading the trace file, the records of each of the per_cpu buffers
are examined to find the next event to print out. At the point of looking
at the event, the size of the event is recorded. But if the first event is
chosen, the other events in the other CPU buffers will reset the event size
that is stored in the iterator descriptor, causing the event size passed to
the output functions to be incorrect.
In most cases this is not a problem, but for the case of stack traces, it
is. With the change to the stack tracing to record a dynamic number of
back traces, the output depends on the size of the entry instead of the
fixed 8 back traces. When the entry size is not correct, the back traces
would not be fully printed.
Note, reading from the per-cpu trace files were not affected.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_dump() (called by ftrace_dump_on_oops) disables interrupts
as it dumps its output to the console, it can keep interrupts disabled
for long periods of time. This is likely to trigger the NMI watchdog,
and it can disrupt the output of critical data.
Add a touch_nmi_watchdog() to each event that is written to the screen
to keep the NMI watchdog from affecting the output.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the ring-buffer code is being used by other facilities in the
kernel, having tracing_on file disable *all* buffers is not a desired
affect. It should only disable the ftrace buffers that are being used.
Move the code into the trace.c file and use the buffer disabling
for tracing_on() and tracing_off(). This way only the ftrace buffers
will be affected by them and other kernel utilities will not be
confused to why their output suddenly stopped.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Actually, sched_switch function tracer is merged into wakeup/wakeup_rt
Update 'mini-HOWTO' for ftrace(Kernel function tracer).
If we want to trace "sched:sched_switch" to trace sched_switch func,
We may utilize event option.(e.g: trace-cmd list -e | grep sched)
This patch is based on Linux-3.3.rc2-SMP-PREEMPT
Link: http://lkml.kernel.org/r/1328695537-15081-1-git-send-email-geunsik.lim@gmail.com
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
reiserfs: Properly display mount options in /proc/mounts
vfs: prevent remount read-only if pending removes
vfs: count unlinked inodes
vfs: protect remounting superblock read-only
vfs: keep list of mounts for each superblock
vfs: switch ->show_options() to struct dentry *
vfs: switch ->show_path() to struct dentry *
vfs: switch ->show_devname() to struct dentry *
vfs: switch ->show_stats to struct dentry *
switch security_path_chmod() to struct path *
vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
vfs: trim includes a bit
switch mnt_namespace ->root to struct mount
vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
vfs: opencode mntget() mnt_set_mountpoint()
vfs: spread struct mount - remaining argument of next_mnt()
vfs: move fsnotify junk to struct mount
vfs: move mnt_devname
vfs: move mnt_list to struct mount
vfs: switch pnode.h macros to struct mount *
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits)
perf kvm: Fix copy & paste error in description
perf script: Kill script_spec__delete
perf top: Fix a memory leak
perf stat: Introduce get_ratio_color() helper
perf session: Remove impossible condition check
perf tools: Fix feature-bits rework fallout, remove unused variable
perf script: Add generic perl handler to process events
perf tools: Use for_each_set_bit() to iterate over feature flags
perf tools: Unify handling of features when writing feature section
perf report: Accept fifos as input file
perf tools: Moving code in some files
perf tools: Fix out-of-bound access to struct perf_session
perf tools: Continue processing header on unknown features
perf tools: Improve macros for struct feature_ops
perf: builtin-record: Document and check that mmap_pages must be a power of two.
perf: builtin-record: Provide advice if mmap'ing fails with EPERM.
perf tools: Fix truncated annotation
perf script: look up thread using tid instead of pid
perf tools: Look up thread names for system wide profiling
perf tools: Fix comm for processes with named threads
...
Add an EXPORT_SYMBOL_GPL() so that rcutorture can dump the trace buffer
upon detection of an RCU error.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Knowing the number of event entries in the ring buffer compared
to the total number that were written is useful information. The
latency format gives this information and there's no reason that the
default format does not.
This information is now added to the default header, along with the
number of online CPUs:
# tracer: nop
#
# entries-in-buffer/entries-written: 159836/64690869 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [000] ...2 49.442971: local_touch_nmi <-cpu_idle
<idle>-0 [000] d..2 49.442973: enter_idle <-cpu_idle
<idle>-0 [000] d..2 49.442974: atomic_notifier_call_chain <-enter_idle
<idle>-0 [000] d..2 49.442976: __atomic_notifier_call_chain <-atomic_notifier
The above shows that the trace contains 159836 entries, but
64690869 were written. One could figure out that there were
64531033 entries that were dropped.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
People keep asking how to get the preempt count, irq, and need resched info
and we keep telling them to enable the latency format. Some developers think
that traces without this info is completely useless, and for a lot of tasks
it is useless.
The first option was to enable the latency trace as the default format, but
the header for the latency format is pretty useless for most tracers and
it also does the timestamp in straight microseconds from the time the trace
started. This is sometimes more difficult to read as the default trace is
seconds from the start of boot up.
Latency format:
# tracer: nop
#
# nop latency trace v1.1.5 on 3.2.0-rc1-test+
# --------------------------------------------------------------------
# latency: 0 us, #159771/64234230, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| / delay
# cmd pid ||||| time | caller
# \ / ||||| \ | /
migratio-6 0...2 41778231us+: rcu_note_context_switch <-__schedule
migratio-6 0...2 41778233us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778235us+: rcu_sched_qs <-rcu_note_context_switch
migratio-6 0d..2 41778236us+: rcu_preempt_qs <-rcu_note_context_switch
migratio-6 0...2 41778238us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778239us+: debug_lockdep_rcu_enabled <-__schedule
default format:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The latency format header has latency information that is pretty meaningless
for most tracers. Although some of the header is useful, and we can add that
later to the default format as well.
What is really useful with the latency format is the irqs-off, need-resched
hard/softirq context and the preempt count.
This commit adds the option irq-info which is on by default that adds this
information:
# tracer: nop
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [000] d..2 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] d..2 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] d..2 49.309309: need_resched <-mwait_idle
<idle>-0 [000] d..2 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] d..2 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] d..2 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] d..2 49.309315: need_resched <-mwait_idle
If a user wants the old format, they can disable the 'irq-info' option:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<idle>-0 [000] 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] 49.309309: need_resched <-mwait_idle
<idle>-0 [000] 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] 49.309315: need_resched <-mwait_idle
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
perf symbols: Increase symbol KSYM_NAME_LEN size
perf hists browser: Refuse 'a' hotkey on non symbolic views
perf ui browser: Use libslang to read keys
perf tools: Fix tracing info recording
perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
perf hists: Don't consider filtered entries when calculating column widths
perf hists: Don't decay total_period for filtered entries
perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
perf hists browser: Do not exit on tab key with single event
perf annotate browser: Don't change selection line when returning from callq
perf tools: handle endianness of feature bitmap
perf tools: Add prelink suggestion to dso update message
perf script: Fix unknown feature comment
perf hists browser: Apply the dso and thread filters when merging new batches
perf hists: Move the dso and thread filters from hist_browser
perf ui browser: Honour the xterm colors
perf top tui: Give color hints just on the percentage, like on --stdio
perf ui browser: Make the colors configurable and change the defaults
perf tui: Remove unneeded call to newtCls on startup
perf hists: Don't format the percentage on hist_entry__snprintf
...
Fix up conflicts in arch/x86/kernel/kprobes.c manually.
Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?). But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..
Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge. Make
sure that new use also uses the raw accessor functions.
The trace_pipe_raw handler holds a cached page from the time the file
is opened to the time it is closed. The cached page is used to handle
the case of the user space buffer being smaller than what was read from
the ring buffer. The left over buffer is held in the cache so that the
next read will continue where the data left off.
After EOF is returned (no more data in the buffer), the index of
the cached page is set to zero. If a user app reads the page again
after EOF, the check in the buffer will see that the cached page
is less than page size and will return the cached page again. This
will cause reading the trace_pipe_raw again after EOF to return
duplicate data, making the output look like the time went backwards
but instead data is just repeated.
The fix is to not reset the index right after all data is read
from the cache, but to reset it after all data is read and more
data exists in the ring buffer.
Cc: stable <stable@kernel.org>
Reported-by: Jeremy Eder <jeder@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_enabled option is deprecated.
To start/stop tracing, write to /sys/kernel/debug/tracing/tracing_on
without tracing_enabled. This patch is based on Linux 3.1.0-rc1
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Link: http://lkml.kernel.org/r/1313127022-23830-1-git-send-email-leemgs1@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When doing intense tracing, the kmalloc inside trace_marker can
introduce side effects to what is being traced.
As trace_marker() is used by userspace to inject data into the
kernel ring buffer, it needs to do so with the least amount
of intrusion to the operations of the kernel or the user space
application.
As the ring buffer is designed to write directly into the buffer
without the need to make a temporary buffer, and userspace already
went through the hassle of knowing how big the write will be,
we can simply pin the userspace pages and write the data directly
into the buffer. This improves the impact of tracing via trace_marker
tremendously!
Thanks to Peter Zijlstra and Thomas Gleixner for pointing out the
use of get_user_pages_fast() and kmap_atomic().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the function tracer is very intrusive, lots of self checks are
performed on the tracer and if something is found to be strange
it will shut itself down keeping it from corrupting the rest of the
kernel. This shutdown may still allow functions to be traced, as the
tracing only stops new modifications from happening. Trying to stop
the function tracer itself can cause more harm as it requires code
modification.
Although a WARN_ON() is executed, a user may not notice it. To help
the user see that something isn't right with the tracing of the system
a big warning is added to the output of the tracer that lets the user
know that their data may be incomplete.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When debugging tight race conditions, it can be helpful to have a
synchronized tracing method. Although in most cases the global clock
provides this functionality, if timings is not the issue, it is more
comforting to know that the order of events really happened in a precise
order.
Instead of using a clock, add a "counter" that is simply an incrementing
atomic 64bit counter that orders the events as they are perceived to
happen.
The trace_clock_counter() is added from the attempt by Peter Zijlstra
trying to convert the trace_clock_global() to it. I took Peter's counter
code and made trace_clock_counter() instead, and added it to the choice
of clocks. Just echo counter > /debug/tracing/trace_clock to activate
it.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing locks can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.
In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The stats file under per_cpu folder provides the number of entries,
overruns and other statistics about the CPU ring buffer. However, the
numbers do not provide any indication of how full the ring buffer is in
bytes compared to the overall size in bytes. Also, it is helpful to know
the rate at which the cpu buffer is filling up.
This patch adds an entry "bytes: " in printed stats for per_cpu ring
buffer which provides the actual bytes consumed in the ring buffer. This
field includes the number of bytes used by recorded events and the
padding bytes added when moving the tail pointer to next page.
It also adds the following time stamps:
"oldest event ts:" - the oldest timestamp in the ring buffer
"now ts:" - the timestamp at the time of reading
The field "now ts" provides a consistent time snapshot to the userspace
when being read. This is read from the same trace clock used by tracing
event timestamps.
Together, these values provide the rate at which the buffer is filling
up, from the formula:
bytes / (now_ts - oldest_event_ts)
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current file "buffer_size_kb" reports the size of per-cpu buffer and
not the overall memory allocated which could be misleading. A new file
"buffer_total_size_kb" adds up all the enabled CPU buffer sizes and
reports it. This is only a readonly entry.
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1313531179-9323-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the stack trace per event in ftace is only 8 frames.
This can be quite limiting and sometimes useless. Especially when
the "ignore frames" is wrong and we also use up stack frames for
the event processing itself.
Change this to be dynamic by adding a percpu buffer that we can
write a large stack frame into and then copy into the ring buffer.
For interrupts and NMIs that come in while another event is being
process, will only get to use the 8 frame stack. That should be enough
as the task that it interrupted will have the full stack frame anyway.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix to support kernel stack trace correctly on kprobe-tracer.
Since the execution path of kprobe-based dynamic events is different
from other tracepoint-based events, normal ftrace_trace_stack() doesn't
work correctly. To fix that, this introduces ftrace_trace_stack_regs()
which traces stack via pt_regs instead of current stack register.
e.g.
# echo p schedule+4 > /sys/kernel/debug/tracing/kprobe_events
# echo 1 > /sys/kernel/debug/tracing/options/stacktrace
# echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
# head -n 20 /sys/kernel/debug/tracing/trace
bash-2968 [000] 10297.050245: p_schedule_4: (schedule+0x4/0x4ca)
bash-2968 [000] 10297.050247: <stack trace>
=> schedule_timeout
=> n_tty_read
=> tty_read
=> vfs_read
=> sys_read
=> system_call_fastpath
kworker/0:1-2940 [000] 10297.050265: p_schedule_4: (schedule+0x4/0x4ca)
kworker/0:1-2940 [000] 10297.050266: <stack trace>
=> worker_thread
=> kthread
=> kernel_thread_helper
sshd-1132 [000] 10297.050365: p_schedule_4: (schedule+0x4/0x4ca)
sshd-1132 [000] 10297.050365: <stack trace>
=> sysret_careful
Note: Even with this fix, the first entry will be skipped
if the probe is put on the function entry area before
the frame pointer is set up (usually, that is 4 bytes
(push %bp; mov %sp %bp) on x86), because stack unwinder
depends on the frame pointer.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/20110608070934.17777.17116.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Link: http://lkml.kernel.org/r/1307476707-14762-1-git-send-email-peterhuewe@gmx.de
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The header display of function tracer does not follow
the context-info option, so field names are displayed even
if this option is off.
Added check for TRACE_ITER_CONTEXT_INFO trace_flags.
With following commands:
# echo function > ./current_tracer
# echo 0 > options/context-info
# cat trace
This is what it looked like before:
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
add_preempt_count <-schedule
rcu_note_context_switch <-schedule
...
This is what it looks like now:
# tracer: function
#
_raw_spin_unlock_irqrestore <-hrtimer_try_to_cancel
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-4-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a trace option to disable tracing on free. When this option is
set, a write into the free_buffer file will not only shrink the
ring buffer down to zero, but it will also disable tracing.
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The proc file entry buffer_size_kb is used to set the size of tracing
buffer. The memory to expand the buffer size is kernel memory. Consider
a use case where tracing is handled by a user space utility, which acts
as a gate keeper for tracing requests. In an OOM condition, tracing is
considered a low priority task and if the utility gets killed the ring
buffer memory cannot be released back to the kernel.
This patch adds a proc file called "free_buffer" whose purpose is to
stop tracing and free up the ring buffer when it is closed.
The user space process can then set the desired size in buffer_size_kb
file and open the fd to the "free_buffer" file. Under OOM condition, if
the process gets killed, the kernel closes the file descriptor. The
release handler stops the tracing and releases the kernel memory
automatically.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/1308012717-11148-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing ring buffer is a group of per-cpu ring buffers where
allocation and logging is done on a per-cpu basis. The events that are
generated on a particular CPU are logged in the corresponding buffer.
This is to provide wait-free writes between CPUs and good NUMA node
locality while accessing the ring buffer.
However, the allocation routines consider NUMA locality only for buffer
page metadata and not for the actual buffer page. This causes the pages
to be allocated on the NUMA node local to the CPU where the allocation
routine is running at the time.
This patch fixes the problem by using a NUMA node specific allocation
routine so that the pages are allocated from a NUMA node local to the
logging CPU.
I tested with the getuid_microbench from autotest. It is a simple binary
that calls getuid() in a loop and measures the average time for the
syscall to complete. The following command was used to test:
$ getuid_microbench 1000000
Compared the numbers found on kernel with and without this patch and
found that logging latency decreases by 30-50 ns/call.
tracing with non-NUMA allocation - 569 ns/call
tracing with NUMA allocation - 512 ns/call
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In using syscall tracing by concurrent processes, the wakeup() that is
called in the event commit function causes contention on the spin lock
of the waitqueue. I enabled sys_enter_getuid and sys_exit_getuid
tracepoints, and by running getuid_microbench from autotest in parallel
I found that the contention causes exponential latency increase in the
tracing path.
The autotest binary getuid_microbench calls getuid() in a tight loop for
the given number of iterations and measures the average time required to
complete a single invocation of syscall.
The patch schedules a delayed work after 2 ms once an event commit calls
to wake up the trace wait_queue. This removes the delay caused by
contention on spin lock in wakeup() and amortizes the wakeup() calls
scheduled over the 2 ms period.
In the following example, the script enables the sys_enter_getuid and
sys_exit_getuid tracepoints and runs the getuid_microbench in parallel
with the given number of processes. The output clearly shows the latency
increase caused by contentions.
$ ~/getuid.sh 1
1000000 calls in 0.720974253 s (720.974253 ns/call)
$ ~/getuid.sh 2
1000000 calls in 1.166457554 s (1166.457554 ns/call)
1000000 calls in 1.168933765 s (1168.933765 ns/call)
$ ~/getuid.sh 3
1000000 calls in 1.783827516 s (1783.827516 ns/call)
1000000 calls in 1.795553270 s (1795.553270 ns/call)
1000000 calls in 1.796493376 s (1796.493376 ns/call)
$ ~/getuid.sh 4
1000000 calls in 4.483041796 s (4483.041796 ns/call)
1000000 calls in 4.484165388 s (4484.165388 ns/call)
1000000 calls in 4.484850762 s (4484.850762 ns/call)
1000000 calls in 4.485643576 s (4485.643576 ns/call)
$ ~/getuid.sh 5
1000000 calls in 6.497521653 s (6497.521653 ns/call)
1000000 calls in 6.502000236 s (6502.000236 ns/call)
1000000 calls in 6.501709115 s (6501.709115 ns/call)
1000000 calls in 6.502124100 s (6502.124100 ns/call)
1000000 calls in 6.502936358 s (6502.936358 ns/call)
After the patch, the latencies scale better.
1000000 calls in 0.728720455 s (728.720455 ns/call)
1000000 calls in 0.842782857 s (842.782857 ns/call)
1000000 calls in 0.883803135 s (883.803135 ns/call)
1000000 calls in 0.902077764 s (902.077764 ns/call)
1000000 calls in 0.902838202 s (902.838202 ns/call)
1000000 calls in 0.908896885 s (908.896885 ns/call)
1000000 calls in 0.932523515 s (932.523515 ns/call)
1000000 calls in 0.958009672 s (958.009672 ns/call)
1000000 calls in 0.986188020 s (986.188020 ns/call)
1000000 calls in 0.989771102 s (989.771102 ns/call)
1000000 calls in 0.933518391 s (933.518391 ns/call)
1000000 calls in 0.958897947 s (958.897947 ns/call)
1000000 calls in 1.031038897 s (1031.038897 ns/call)
1000000 calls in 1.089516025 s (1089.516025 ns/call)
1000000 calls in 1.141998347 s (1141.998347 ns/call)
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1305059241-7629-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This partially reverts commit e6e1e25935.
That commit changed the structure layout of the trace structure, which
in turn broke PowerTOP (1.9x generation) quite badly.
I appreciate not wanting to expose the variable in question, and
PowerTOP was not using it, so I've replaced the variable with just a
padding field - that way if in the future a new field is needed it can
just use this padding field.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts:
include/linux/perf_event.h
Merge reason: pick up the latest jump-label enhancements, they are cooked ready.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
running following commands:
# enable the binary option
echo 1 > ./options/bin
# disable context info option
echo 0 > ./options/context-info
# tracing only events
echo 1 > ./events/enable
cat trace_pipe
plus forcing system to generate many tracing events,
is causing lockup (in NON preemptive kernels) inside
tracing_read_pipe function.
The issue is also easily reproduced by running ltp stress test.
(ftrace_stress_test.sh)
The reasons are:
- bin/hex/raw output functions for events are set to
trace_nop_print function, which prints nothing and
returns TRACE_TYPE_HANDLED value
- LOST EVENT trace do not handle trace_seq overflow
These reasons force the while loop in tracing_read_pipe
function never to break.
The attached patch fixies handling of lost event trace, and
changes trace_nop_print to print minimal info, which is needed
for the correct tracing_read_pipe processing.
v2 changes:
- omit the cond_resched changes by trace_nop_print changes
- WARN changed to WARN_ONCE and added info to be able
to find out the culprit
v3 changes:
- make more accurate patch comment
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20110325110518.GC1922@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the kernel command line declares a tracer "ftrace=sometracer" and
that tracer is either not defined or is enabled after irqsoff,
then the irqs off selftest will fail with the following error:
Testing tracer irqsoff:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/autotest/nobackup/linux-test.git/kernel/trace/tra
ce.c:713 update_max_tr_single+0xfa/0x11b()
Hardware name:
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38-rc8-test #1
Call Trace:
[<c0441d9d>] ? warn_slowpath_common+0x65/0x7a
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c0441dc1>] ? warn_slowpath_null+0xf/0x13
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c049e454>] ? stop_critical_timing+0x154/0x204
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049e529>] ? time_hardirqs_on+0x25/0x28
[<c0468bca>] ? trace_hardirqs_on_caller+0x18/0x12f
[<c0468cec>] ? trace_hardirqs_on+0xb/0xd
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b6b8>] ? register_tracer+0xf8/0x1a3
[<c14e93fe>] ? init_irqsoff_tracer+0xd/0x11
[<c040115e>] ? do_one_initcall+0x71/0x121
[<c14e93f1>] ? init_irqsoff_tracer+0x0/0x11
[<c14ce3a9>] ? kernel_init+0x13a/0x1b6
[<c14ce26f>] ? kernel_init+0x0/0x1b6
[<c0403842>] ? kernel_thread_helper+0x6/0x10
---[ end trace e93713a9d40cd06c ]---
.. no entries found ..FAILED!
What happens is the "ftrace=..." will expand the ring buffer to its
default size (from its minimum size) but it will not expand the
max ring buffer (the ring buffer to store maximum latencies).
When the irqsoff test runs, it will call the ring buffer swap routine
that checks if the max ring buffer is the same size as the normal
ring buffer, and will fail if it is not. This causes the test to fail.
The solution is to expand the max ring buffer before running the self
test if the max ring buffer is used by that tracer and the normal ring
buffer is expanded. The max ring buffer should be shrunk again after
the test is done to save space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The lock_depth field in the event headers was added as a temporary
data point for help in removing the BKL. Now that the BKL is pretty
much been removed, we can remove this field.
This in turn changes the header from 12 bytes to 8 bytes,
removing the 4 byte buffer that gcc would insert if the first field
in the data load was 8 bytes in size.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_enabled should not be used, it is heavy weight and does not
do much in helping lower the overhead.
tracing_on should be used instead. Warn users to use tracing_on
when tracing_enabled is used as it will soon be removed from the
tracing directory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While running my ftrace stress test, this showed up:
BUG: sleeping function called from invalid context at mm/mmap.c:233
...
note: cat[3293] exited with preempt_count 1
The bug was introduced by commit 91e86e560d
("tracing: Fix recursive user stack trace")
Cc: <stable@kernel.org>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4D0089AC.1020802@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The file_ops struct for the "trace" special file defined llseek as seq_lseek().
However, if the file was opened for writing only, seq_open() was not called,
and the seek would dereference a null pointer, file->private_data.
This patch introduces a new wrapper for seq_lseek() which checks if the file
descriptor is opened for reading first. If not, it does nothing.
Cc: <stable@kernel.org>
Signed-off-by: Slava Pestov <slavapestov@google.com>
LKML-Reference: <1290640396-24179-1-git-send-email-slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf symbols: Remove incorrect open-coded container_of()
perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
x86/kprobes: Prevent kprobes to probe on save_args()
irq_work: Drop cmpxchg() result
perf: Fix owner-list vs exit
x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
tracing: Fix recursive user stack trace
perf,hw_breakpoint: Initialize hardware api earlier
x86: Ignore trap bits on single step exceptions
tracing: Force arch_local_irq_* notrace for paravirt
tracing: Fix module use of trace_bprintk()
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The user stack trace can fault when examining the trace. Which
would call the do_page_fault handler, which would trace again,
which would do the user stack trace, which would fault and call
do_page_fault again ...
Thus this is causing a recursive bug. We need to have a recursion
detector here.
[ Resubmitted by Jiri Olsa ]
[ Eric Dumazet recommended using __this_cpu_* instead of __get_cpu_* ]
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1289390172-9730-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing per_cpu buffers were limited to 999 CPUs for a mear
savings in stack space of a char array. Up the array to 30 characters
which is more than enough to hold a 64 bit number.
Reported-by: Robin Holt <holt@sgi.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
do_coredump: Do not take BKL
init: Remove the BKL from startup code
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
tracing/kprobes: unregister_trace_probe needs to be called under mutex
perf: expose event__process function
perf events: Fix mmap offset determination
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
perf, powerpc: Convert the FSL driver to use local64_t
perf tools: Don't keep unreferenced maps when unmaps are detected
perf session: Invalidate last_match when removing threads from rb_tree
perf session: Free the ref_reloc_sym memory at the right place
x86,mmiotrace: Add support for tracing STOS instruction
perf, sched migration: Librarize task states and event headers helpers
perf, sched migration: Librarize the GUI class
perf, sched migration: Make the GUI class client agnostic
perf, sched migration: Make it vertically scrollable
perf, sched migration: Parameterize cpu height and spacing
perf, sched migration: Fix key bindings
perf, sched migration: Ignore unhandled task states
perf, sched migration: Handle ignored migrate out events
perf: New migration tool overview
tracing: Drop cpparg() macro
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
...
Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
Add in a helper function to allow the kdb shell to dump the ftrace
buffer.
Modify trace.c to expose the capability to iterate over the ftrace
buffer in a read only capacity.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
We need to add one to the strlen() return because of the NULL
character. The type->name here generally comes from the kernel and I
don't think any of them come close to being MAX_TRACER_SIZE (100)
characters long so this is basically a cleanup.
Signed-off-by: Dan Carpenter <error27@gmail.com>
LKML-Reference: <20100710100644.GV19184@bicker>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Documentation/trace/ftrace.txt says
buffer_size_kb:
This sets or displays the number of kilobytes each CPU
buffer can hold. The tracer buffers are the same size
for each CPU. The displayed number is the size of the
CPU buffer and not total size of all buffers. The
trace buffers are allocated in pages (blocks of memory
that the kernel uses for allocation, usually 4 KB in size).
If the last page allocated has room for more bytes
than requested, the rest of the page will be used,
making the actual allocation bigger than requested.
( Note, the size may not be a multiple of the page size
due to buffer management overhead. )
This can only be updated when the current_tracer
is set to "nop".
But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.
Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.
That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.
Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.
This patch shrink buffer size of the max latency buffer if
unnecessary.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We found that even enabling a single trace event that will rarely be
triggered can add big overhead to context switch.
(lmbench context switch test)
-------------------------------------------------
2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw
------ ------ ------ ------ ------ ------- -------
2.19 2.3 2.21 2.56 2.13 2.54 2.07
2.39 2.51 2.35 2.75 2.27 2.81 2.24
The overhead is 6% ~ 11%.
It's because when a trace event is enabled 3 tracepoints (sched_switch,
sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname.
We'd like to avoid this overhead, so add a trace option '(no)record-cmd'
to allow to disable cmdline recording.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The default for llseek will change to no_llseek,
so the tracing debugfs files need to add explicit
.llseek assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1278538820-1392-10-git-send-email-arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Special traces type was only used by sysprof. Lets remove it now
that sysprof ftrace plugin has been dropped.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.
Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
I have shown by code review that no driver takes
the BKL at init time any more, so whatever the
init code was locking against is no longer there
and it is now safe to remove the BKL there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedt@goodmis>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.
Nobody seem to be using it so far. Then just remove it.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).
The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.
This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.
This bug would cause a missed preemption check and cause lower latencies.
Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tui: Fix last use_browser problem related to .perfconfig
perf symbols: Add the build id cache to the vmlinux path
perf tui: Reset use_browser if stdout is not a tty
ring-buffer: Move zeroing out excess in page to ring buffer code
ring-buffer: Reset "real_end" when page is filled
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
tracing: Add __used annotation to event variable
perf, trace: Fix !x86 build bug
perf report: Support multiple events on the TUI
perf annotate: Fix up usage of the build id cache
x86/mmiotrace: Remove redundant instruction prefix checks
perf annotate: Add TUI interface
perf tui: Remove annotate from popup menu after failure
perf report: Don't start the TUI if -D is used
perf: Fix getline undeclared
perf: Optimize perf_tp_event_match()
perf: Remove more code from the fastpath
perf: Optimize the !vmalloc backed buffer
perf: Optimize perf_output_copy()
perf: Fix wakeup storm for RO mmap()s
perf-record: Share per-cpu buffers
perf-record: Remove -M
perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
...
Currently the trace splice code zeros out the excess bytes in the page before
sending it off to userspace.
This is to make sure userspace is not getting anything it should not be
when reading the pages, because the excess data was never initialized
to zero before writing (for perfomance reasons).
But the splice code has no business in doing this work, it should be
done by the ring buffer. With the latest changes for recording lost
events, the splice code gets it wrong anyway.
Move the zeroing out of excess bytes into the ring buffer code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds F_GETPIPE_SZ and F_SETPIPE_SZ fcntl() actions for
growing and shrinking the size of a pipe and adjusts pipe.c and splice.c
(and relay and network splice) usage to work with these larger (or smaller)
pipes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.
The event itself is now passed to the print function to let the print
function know what kind of event it should print.
This opens the door to consolidating the way several events print
their output.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900382 1048964 861512 6810858 67ecea vmlinux.init
4900446 1049028 861512 6810986 67ed6a vmlinux.preprint
This change slightly increases the size but is needed for the next change.
v3: Fix the branch tracer events to handle this change.
v2: Fix the new function graph tracer event calls to handle this change.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When performing a non-consuming read, a synchronize_sched() is
performed once for every cpu which is actively tracing.
This is very expensive, and can make it take several seconds to open
up the 'trace' file with lots of cpus.
Only one synchronize_sched() call is actually necessary. What is
desired is for all cpus to see the disabling state change. So we
transform the existing sequence:
for_each_cpu() {
ring_buffer_read_start();
}
where each ring_buffer_start() call performs a synchronize_sched(),
into the following:
for_each_cpu() {
ring_buffer_read_prepare();
}
ring_buffer_read_prepare_sync();
for_each_cpu() {
ring_buffer_read_start();
}
wherein only the single ring_buffer_read_prepare_sync() call needs to
do the synchronize_sched().
The first phase, via ring_buffer_read_prepare(), allocates the 'iter'
memory and increments ->record_disabled.
In the second phase, ring_buffer_read_prepare_sync() makes sure this
->record_disabled state is visible fully to all cpus.
And in the final third phase, the ring_buffer_read_start() calls reset
the 'iter' objects allocated in the first phase since we now know that
none of the cpus are adding trace entries any more.
This makes openning the 'trace' file nearly instantaneous on a
sparc64 Niagara2 box with 128 cpus tracing.
Signed-off-by: David S. Miller <davem@davemloft.net>
LKML-Reference: <20100420.154711.11246950.davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function graph output to irqsoff tracer.
The graph output is enabled by setting new 'display-graph' trace option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_dump_on_oops kernel parameter, sysctl and sysrq let one
dump every cpu buffers when an oops or panic happens.
It's nice when you have few cpus but it may take ages if have many,
plus you miss the real origin of the problem in all the cpu traces.
Sometimes, all you need is to dump the cpu buffer that triggered the
opps, most of the time it is our main interest.
This patch modifies ftrace_dump_on_oops to handle this choice.
The ftrace_dump_on_oops kernel parameter, when it comes alone, has
the same behaviour than before. But ftrace_dump_on_oops=orig_cpu
will only dump the buffer of the cpu that oops'ed.
Similarly, sysctl kernel.ftrace_dump_on_oops=1 and
echo 1 > /proc/sys/kernel/ftrace_dump_on_oops keep their previous
behaviour. But setting 2 jumps into cpu origin dump mode.
v2: Fix double setup
v3: Fix spelling issues reported by Randy Dunlap
v4: Also update __ftrace_dump in the selftests
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Because a local variable is not initialized, I got these
when I did 'cat tracing/trace'. (not trace_pipe):
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770221: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446612133255294080 EVENTS]
ps-3099 [000] 560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770222: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770222: lock_release: ffffffff816cfb98 dcache_lock
See peek_next_entry(), it does not set *lost_events when we 'cat tracing/trace'
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4BB9A929.2000303@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the ring buffer can keep track of where events are lost.
Use this information to the output of trace_pipe:
hackbench-3588 [001] 1326.701660: lock_acquire: ffffffff816591e0 read rcu_read_lock
hackbench-3588 [001] 1326.701661: lock_acquire: ffff88003f4091f0 &(&dentry->d_lock)->rlock
hackbench-3588 [001] 1326.701664: lock_release: ffff88003f4091f0 &(&dentry->d_lock)->rlock
CPU:1 [LOST 673 EVENTS]
hackbench-3588 [001] 1326.702711: kmem_cache_free: call_site=ffffffff81102b85 ptr=ffff880026d96738
hackbench-3588 [001] 1326.702712: lock_release: ffff88003e1480a8 &mm->mmap_sem
hackbench-3588 [001] 1326.702713: lock_acquire: ffff88003e1480a8 &mm->mmap_sem
Even works with the function graph tracer:
2) ! 170.098 us | }
2) 4.036 us | rcu_irq_exit();
2) 3.657 us | idle_cpu();
2) ! 190.301 us | }
CPU:2 [LOST 2196 EVENTS]
2) 0.853 us | } /* cancel_dirty_page */
2) | remove_from_page_cache() {
2) 1.578 us | _raw_spin_lock_irq();
2) | __remove_from_page_cache() {
Note, it does not work with the iterator "trace" file, since it requires
the use of consuming the page from the ring buffer to determine how many
events were lost, which the iterator does not do.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, when the ring buffer drops events, it does not record
the fact that it did so. It does inform the writer that the event
was dropped by returning a NULL event, but it does not put in any
place holder where the event was dropped.
This is not a trivial thing to add because the ring buffer mostly
runs in overwrite (flight recorder) mode. That is, when the ring
buffer is full, new data will overwrite old data.
In a produce/consumer mode, where new data is simply dropped when
the ring buffer is full, it is trivial to add the placeholder
for dropped events. When there's more room to write new data, then
a special event can be added to notify the reader about the dropped
events.
But in overwrite mode, any new write can overwrite events. A place
holder can not be inserted into the ring buffer since there never
may be room. A reader could also come in at anytime and miss the
placeholder.
Luckily, the way the ring buffer works, the read side can find out
if events were lost or not, and how many events. Everytime a write
takes place, if it overwrites the header page (the next read) it
updates a "overrun" variable that keeps track of the number of
lost events. When a reader swaps out a page from the ring buffer,
it can record this number, perfom the swap, and then check to
see if the number changed, and take the diff if it has, which would be
the number of events dropped. This can be stored by the reader
and returned to callers of the reader.
Since the reader page swap will fail if the writer moved the head
page since the time the reader page set up the swap, this gives room
to record the overruns without worrying about races. If the reader
sets up the pages, records the overrun, than performs the swap,
if the swap succeeds, then the overrun variable has not been
updated since the setup before the swap.
For binary readers of the ring buffer, a flag is set in the header
of each sub page (sub buffer) of the ring buffer. This flag is embedded
in the size field of the data on the sub buffer, in the 31st bit (the size
can be 32 or 64 bits depending on the architecture), but only 27
bits needs to be used for the actual size (less actually).
We could add a new field in the sub buffer header to also record the
number of events dropped since the last read, but this will change the
format of the binary ring buffer a bit too much. Perhaps this change can
be made if the information on the number of events dropped is considered
important enough.
Note, the notification of dropped events is only used by consuming reads
or peeking at the ring buffer. Iterating over the ring buffer does not
keep this information because the necessary data is only available when
a page swap is made, and the iterator does not swap out pages.
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Do not record user stack trace from NMI context
tracing: Disable buffer switching when starting or stopping trace
tracing: Use same local variable when resetting the ring buffer
function-graph: Init curr_ret_stack with ret_stack
ring-buffer: Move disabled check into preempt disable section
function-graph: Add tracing_thresh support to function_graph tracer
tracing: Update the comm field in the right variable in update_max_tr
function-graph: Use comment notation for func names of dangling '}'
function-graph: Fix unused reference to ftrace_set_func()
tracing: Fix warning in s_next of trace file ops
tracing: Include irqflags headers from trace clock
A bug was found with Li Zefan's ftrace_stress_test that caused applications
to segfault during the test.
Placing a tracing_off() in the segfault code, and examining several
traces, I found that the following was always the case. The lock tracer
was enabled (lockdep being required) and userstack was enabled. Testing
this out, I just enabled the two, but that was not good enough. I needed
to run something else that could trigger it. Running a load like hackbench
did not work, but executing a new program would. The following would
trigger the segfault within seconds:
# echo 1 > /debug/tracing/options/userstacktrace
# echo 1 > /debug/tracing/events/lock/enable
# while :; do ls > /dev/null ; done
Enabling the function graph tracer and looking at what was happening
I finally noticed that all cashes happened just after an NMI.
1) | copy_user_handle_tail() {
1) | bad_area_nosemaphore() {
1) | __bad_area_nosemaphore() {
1) | no_context() {
1) | fixup_exception() {
1) 0.319 us | search_exception_tables();
1) 0.873 us | }
[...]
1) 0.314 us | __rcu_read_unlock();
1) 0.325 us | native_apic_mem_write();
1) 0.943 us | }
1) 0.304 us | rcu_nmi_exit();
[...]
1) 0.479 us | find_vma();
1) | bad_area() {
1) | __bad_area() {
After capturing several traces of failures, all of them happened
after an NMI. Curious about this, I added a trace_printk() to the NMI
handler to read the regs->ip to see where the NMI happened. In which I
found out it was here:
ffffffff8135b660 <page_fault>:
ffffffff8135b660: 48 83 ec 78 sub $0x78,%rsp
ffffffff8135b664: e8 97 01 00 00 callq ffffffff8135b800 <error_entry>
What was happening is that the NMI would happen at the place that a page
fault occurred. It would call rcu_read_lock() which was traced by
the lock events, and the user_stack_trace would run. This would trigger
a page fault inside the NMI. I do not see where the CR2 register is
saved or restored in NMI handling. This means that it would corrupt
the page fault handling that the NMI interrupted.
The reason the while loop of ls helped trigger the bug, was that
each execution of ls would cause lots of pages to be faulted in, and
increase the chances of the race happening.
The simple solution is to not allow user stack traces in NMI context.
After this patch, I ran the above "ls" test for a couple of hours
without any issues. Without this patch, the bug would trigger in less
than a minute.
Cc: stable@kernel.org
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the trace iterator is read, tracing_start() and tracing_stop()
is called to stop tracing while the iterator is processing the trace
output.
These functions disable both the standard buffer and the max latency
buffer. But if the wakeup tracer is running, it can switch these
buffers between the two disables:
buffer = global_trace.buffer;
if (buffer)
ring_buffer_record_disable(buffer);
<<<--------- swap happens here
buffer = max_tr.buffer;
if (buffer)
ring_buffer_record_disable(buffer);
What happens is that we disabled the same buffer twice. On tracing_start()
we can enable the same buffer twice. All ring_buffer_record_disable()
must be matched with a ring_buffer_record_enable() or the buffer
can be disable permanently, or enable prematurely, and cause a bug
where a reset happens while a trace is commiting.
This patch protects these two by taking the ftrace_max_lock to prevent
a switch from occurring.
Found with Li Zefan's ftrace_stress_test.
Cc: stable@kernel.org
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the ftrace code that resets the ring buffer it references the
buffer with a local variable, but then uses the tr->buffer as the
parameter to reset. If the wakeup tracer is running, which can
switch the tr->buffer with the max saved buffer, this can break
the requirement of disabling the buffer before the reset.
buffer = tr->buffer;
ring_buffer_record_disable(buffer);
synchronize_sched();
__tracing_reset(tr->buffer, cpu);
If the tr->buffer is swapped, then the reset is not happening to the
buffer that was disabled. This will cause the ring buffer to fail.
Found with Li Zefan's ftrace_stress_test.
Cc: stable@kernel.org
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add support for tracing_thresh to the function_graph tracer. This
version of this feature isolates the checks into new entry and
return functions, to avoid adding more conditional code into the
main function_graph paths.
When the tracing_thresh is set and the function graph tracer is
enabled, only the functions that took longer than the time in
microseconds that was set in tracing_thresh are recorded. To do this
efficiently, only the function exits are recorded:
[tracing]# echo 100 > tracing_thresh
[tracing]# echo function_graph > current_tracer
[tracing]# cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) ! 119.214 us | } /* smp_apic_timer_interrupt */
1) <========== |
0) ! 101.527 us | } /* __rcu_process_callbacks */
0) ! 126.461 us | } /* rcu_process_callbacks */
0) ! 145.111 us | } /* __do_softirq */
0) ! 149.667 us | } /* do_softirq */
0) ! 168.817 us | } /* irq_exit */
0) ! 248.254 us | } /* smp_apic_timer_interrupt */
Also, add support for specifying tracing_thresh on the kernel
command line. When used like so: "tracing_thresh=200 ftrace=function_graph"
this can be used to analyse system startup. It is important to disable
tracing soon after boot, in order to avoid losing the trace data.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4B87098B.4040308@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency output showed:
# | task: -3 (uid:0 nice:0 policy:1 rt_prio:99)
The comm is missing in the "task:" and it looks like a minus 3 is
the output. The correct display should be:
# | task: migration/0-3 (uid:0 nice:0 policy:1 rt_prio:99)
The problem is that the comm is being stored in the wrong data
structure. The max_tr.data[cpu] is what stores the comm, not the
tr->data[cpu].
Before this patch the max_tr.data[cpu]->comm was zeroed and the /debug/trace
ended up showing just the '-' sign followed by the pid.
Also remove a needless initialization of max_data.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1267824230-23861-1-git-send-email-acme@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This warning in s_next() can be triggered by lseek():
[<c018b3f7>] ? s_next+0x77/0x80
[<c013e3c1>] warn_slowpath_common+0x81/0xa0
[<c018b3f7>] ? s_next+0x77/0x80
[<c013e3fa>] warn_slowpath_null+0x1a/0x20
[<c018b3f7>] s_next+0x77/0x80
[<c01efa77>] traverse+0x117/0x200
[<c01eff13>] seq_lseek+0xa3/0x120
[<c01efe70>] ? seq_lseek+0x0/0x120
[<c01d7081>] vfs_llseek+0x41/0x50
[<c01d8116>] sys_llseek+0x66/0xa0
[<c0102bd0>] sysenter_do_call+0x12/0x26
The iterator "leftover" variable is zeroed in the opening of the trace
file. But lseek can call s_start() which will call s_next() without
reseting the "leftover" variable back to zero, which might trigger
the WARN_ON_ONCE(iter->leftover) that is in s_next().
Cc: stable@kernel.org
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B8CE06A.9090207@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the contents of the ftrace ring buffer gets corrupted and the trace
file is read, it could create a kernel oops (usualy just killing the user
task thread). This is caused by the checking of the pid in the buffer.
If the pid is negative, it still references the cmdline cache array,
which could point to an invalid address.
The simple fix is to test for negative PIDs.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ftrace stacktrace option is set, then add the stack dumps to
trace_printk.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
At the beginning, access to the ring buffer was fully serialized
by trace_types_lock. Patch d7350c3f45 gives more freedom to readers,
and patch b04cc6b1f6 adds code to protect trace_pipe and cpu#/trace_pipe.
But actually it is not enough, ring buffer readers are not always
read-only, they may consume data.
This patch makes accesses to trace, trace_pipe, trace_pipe_raw
cpu#/trace, cpu#/trace_pipe and cpu#/trace_pipe_raw serialized.
And removes tracing_reader_cpumask which is used to protect trace_pipe.
Details:
Ring buffer serializes readers, but it is low level protection.
The validity of the events (which returns by ring_buffer_peek() ..etc)
are not protected by ring buffer.
The content of events may become garbage if we allow another process to consume
these events concurrently:
A) the page of the consumed events may become a normal page
(not reader page) in ring buffer, and this page will be rewritten
by the events producer.
B) The page of the consumed events may become a page for splice_read,
and this page will be returned to system.
This patch adds trace_access_lock() and trace_access_unlock() primitives.
These primitives allow multi process access to different cpu ring buffers
concurrently.
These primitives don't distinguish read-only and read-consume access.
Multi read-only access is also serialized.
And we don't use these primitives when we open files,
we only use them when we read files.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B447D52.1050602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix sign fields in ftrace_define_fields_##call()
tracing/syscalls: Fix typo in SYSCALL_DEFINE0
tracing/kprobe: Show sign of fields in trace_kprobe format files
ksym_tracer: Remove trace_stat
ksym_tracer: Fix race when incrementing count
ksym_tracer: Fix to allow writing newline to ksym_trace_filter
ksym_tracer: Fix to make the tracer work
tracing: Kconfig spelling fixes and cleanups
tracing: Fix setting tracer specific options
Documentation: Update ftrace-design.txt
Documentation: Update tracepoint-analysis.txt
Documentation: Update mmiotrace.txt
The function __set_tracer_option() takes as its last parameter a
"neg" value. If set it should negate the value of the option.
The trace_options_write() passed the value written to the file
which is what the new value needs to be set as. But since this
is not the negative, it never sets the value.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
net: fix for utsrelease.h moving to generated
gen_init_cpio: fixed fwrite warning
kbuild: fix make clean after mismerge
kbuild: generate modules.builtin
genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}()
score: add asm/asm-offsets.h wrapper
unifdef: update to upstream revision 1.190
kbuild: specify absolute paths for cscope
kbuild: create include/generated in silentoldconfig
scripts/package: deb-pkg: use fakeroot if available
scripts/package: add KBUILD_PKG_ROOTCMD variable
scripts/package: tar-pkg: use tar --owner=root
Kbuild: clean up marker
net: add net_tstamp.h to headers_install
kbuild: move utsrelease.h to include/generated
kbuild: move autoconf.h to include/generated
drop explicit include of autoconf.h
kbuild: move compile.h to include/generated
kbuild: drop include/asm
kbuild: do not check for include/asm-$ARCH
...
Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix return of trace_dump_stack()
ksym_tracer: Fix bad cast
tracing/power: Remove two exports
tracing: Change event->profile_count to be int type
tracing: Simplify trace_option_write()
tracing: Remove useless trace option
tracing: Use seq file for trace_clock
tracing: Use seq file for trace_options
function-graph: Allow writing the same val to set_graph_function
ftrace: Call trace_parser_clear() properly
ftrace: Return EINVAL when writing invalid val to set_ftrace_filter
tracing: Move a printk out of ftrace_raw_reg_event_foo()
tracing: Pull up calls to trace_define_common_fields()
tracing: Extract duplicate ftrace_raw_init_event_foo()
ftrace.h: Use common pr_info fmt string
tracing: Add stack trace to irqsoff tracer
tracing: Add trace_dump_stack()
ring-buffer: Move resize integrity check under reader lock
ring-buffer: Use sync sched protection on ring buffer resizing
tracing: Fix wrong usage of strstrip in trace_ksyms
The trace_dump_stack() returned a value for a void function.
Also, added the missing stub for trace_dump_stack() when tracing is
not configured.
Reported-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20091214162713.GA31060@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
