This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of
the managed version of kzalloc). Serio struct should never by managed
because it is refcounted. Doing so will lead to a double free oops on module
remove.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Fixes: e534f3e942 ("staging:nvec: Introduce the use of the managed version of kzalloc")
Cc: stable <stable@vger.kernel.org> # 3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 36b30d6138.
This is necessary to detect paz00 (ac100) touchpad properly as one
speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't
work as the touchpad is detected as an ImPS/2 mouse instead.
Commit ec6184b1c7 changed the way
auto-detection is performed on ports marked as pass through and made the
issue apparent.
A pass through port is an additional PS/2 port used to connect a slave
device to a master device that is using PS/2 to communicate with the
host (so slave's PS/2 communication is tunneled over master's PS/2
link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a
setup (PS/2 PASS-THROUGH OPTION section).
Since paz00's embedded controller is not connected to a PS/2 port
itself, the PS/2 interface it exposes is not a pass-through one.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Fixes: 36b30d6138 ("staging: nvec: ps2: change serio type to passthrough")
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This command was sent behind serio's back and the answer to it was
confusing atkbd probe function which lead to the elantech touchpad
getting detected as a keyboard.
To prevent this from happening just let every party do its part of the
job.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch to nvec_ps2.c to remove an unnecessary cast on a void pointer.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse checking warning:
"drivers/staging/nvec/nvec_ps2.c:172:14: warning: duplicate const".
Remove the duplicated const to fix the warning.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.
This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@
(
x = devm_kzalloc(...);
|
x = usb_alloc_urb(...);
|
x = kmalloc_array(...);
|
x = devm_ioremap(...);
|
x = alloc_netdev(...);
)
...
- if(NULL == x)
+ if(!x)
S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.
Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes coding style warnings reported by checkpatch.pl:
"Missing a blank line after declarations".
Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves shared private data kzalloc to managed devm_kzalloc.
There are no kfree statements associated with this data, so using devm
adds the possibility of the data being freed, if the proble function
fails (if that is possible) or if the remove function succeeds.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable device functions and unregister notifier if available. The
serio device must not be "kzallocated". Otherwise serio_unregister_port
will fail because the device is already freed.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keyboard and mouse drivers were missing MODULE_ALIAS
definitions. This fixes auto module loading of these
drivers.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the various command strings by named constants.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EC command for enable/disable is not an EC command. Instead it needs
to be send to the mouse.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleanups registered devices on remove.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify powermanagement initialization by using pm_ops macro.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplifies code by using the module_platform_driver
macro.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleanups the nvec and its childs by replacing calls to
resource allocations by their devm_* equivalents.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This changes the serio type of the nvec_ps2 mouse port to passthrough.
The old 8042 type seems appropiete for keyboards only.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This change makes the touchpad buttons work after suspend/resume.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This can print the mouse traffic which goes over the i2c bus. Make
mouse debugging messages configurable and disable them by default.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This packet size used on most modern touchpads. Ideally, this should
be configurable or autodetected.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of executing these commands during open/close, the start/stop
event of the serio device seem to be more appropiete.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds suspend and resume functions to the nvec_ps2 mouse driver.
During suspend the nvec sends a "Cancel all mouse events" command. If
this is missed, there will be still some bytes in the received buffer
after resume which make the mouse go out of sync.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Get 4 bytes of data from nvec at once instead of just a single
byte. This makes the driver more similar to nvidias and might
improve reliability.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Return the return value of nvec_write_async() in the methods
returning an int.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes coding style and adds copyright notices.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Merge later cleanup into that patch]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Those headers were apparently included by other headers
previously, but are not anymore.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts the nvec to use mfd cells and improves the
registration of the platform driver. The child drivers are also
converted to use mfd cells and platform registration.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is an implementation of a NVidia compliant embedded controller
protocol driver. It is used on some ARM-Tegra boards for device
communication.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>