* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: revert "save ARCH & CROSS_COMPILE ..."
warn about use of uninstalled kernel headers
kbuild: mkcompile_h: trivial cleanups
kbuild: fix warning when domainname is not available
kbuild: Fix size_append issue for bzip2/lzma kernel
kbuild,scripts: use non-builtin echo for '-e'
kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
Revert commit 575543347b
It caused following issues:
- On architectures where ARCH= setting is used to select between
32 and 64 bit this was no longer possible without "make mrproper"
- If ARCH was changed then kbuild refused to run "make mrproper"
because ARCH had changed
- When CROSS_COMPILE was changed people were asked to run "make mrproper"
but kbuild refused to run "make mrproper" because CROSS_COMPILE changed.
- Spaces in CROSS_COMPILE was not 'supported'
- If an non-existing ARCH= was used kbuild could get stuck
Lessons learned:
. Despite being simple and straghtforward people uses very different
approaches when building the kernel.
. CROSS_COMPILE is sometimes used for ccache despite cache being
only a CC frontend so one would have expected CC to be
used for this purpose.
. And obviously this was not tested widely enough.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in
order to avoid confusion, I'm jumping from -rc1 to -rc3. That way, when
'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about
whether people perhaps meant -rc1 or -rc2.
Albin Tonnerre <albin.tonnerre@free-electrons.com> reported:
Bash 4 filters out variables which contain a dot in them.
This happends to be the case of CPPFLAGS_vmlinux.lds.
This is rather unfortunate, as it now causes
build failures when using SHELL=/bin/bash to compile,
or when bash happens to be used by make (eg when it's /bin/sh)
Remove the common definition of CPPFLAGS_vmlinux.lds by
pushing relevant stuff to either Makefile.build or the
arch specific kernel/Makefile where we build the linker script.
This is also nice cleanup as we move the information out where
it is used.
Notes for the different architectures touched:
arm - we use an already exported symbol
cris - we use a config symbol aleady available
[Not build tested]
mips - the jiffies complexity has moved to vmlinux.lds.S where we need it.
Added a few variables to CPPFLAGS - they are only used by
the linker script.
[Not build tested]
powerpc - removed assignment that is not needed
[not build tested]
sparc - simplified it using $(BITS)
um - introduced a few new exported variables to deal with this
xtensa - added options to CPP invocation
[not build tested]
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The upcomming gcc 4.5 has a new -fconserve-stack option that tells the
inliner to take stack frame size in account. Set it if the compiler
supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The new alternative `gold' linker in recent binutils doesn't support
the -X option. This breaks allyesconfig builds that have
CONFIG_STRIP_ASM_SYMS enabled. Check if the linker really supports
the option using ld-option.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
ld-option is misnamed as it test options to gcc, not to ld.
Renamed it to reflect this.
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When building a kernel for a different architecture
kbuild requires the user always to specify ARCH and
CROSS_COMPILE on the command-line.
We use the asm symlink to detect if user forgets to
specify the correct ARCH value - but that symlink
is about to die. And we do now want to loose this check.
This patch save the settings of ARCH and CROSS_COMPILE
in two files named:
include/generated/kernel.arch
include/generated/kernel.cross
The settings are saved during "make *config" time
and always read.
If user try to change the settings we error out.
This works both for plain builds and for O=...
builds.
So now you can do:
$ mkdir sparc64
$ make O=sparc64 ARCH=sparc64 CROSS_COMPILE=sparc64-linux- defconfig
$ cd sparc64
$ make
Notice that you no longer need to tell kbuild
the settings of ARCH and CROSS_COMPILE when you type make
in the output directory.
Likewise for plain builds where you do not use O=...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roland McGrath <roland@redhat.com>
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:
make INSTALLKERNEL=arm-installkernel install
With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.
The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.
The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]
This patch undos what Ian did in commit:
0f8e2d62fa
("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")
The patch has been lightly tested on x86 only - but all changes
looks obvious.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
powerpc64: convert to dynamic percpu allocator
sparc64: use embedding percpu first chunk allocator
percpu: kill lpage first chunk allocator
x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
percpu: update embedding first chunk allocator to handle sparse units
percpu: use group information to allocate vmap areas sparsely
vmalloc: implement pcpu_get_vm_areas()
vmalloc: separate out insert_vmalloc_vm()
percpu: add chunk->base_addr
percpu: add pcpu_unit_offsets[]
percpu: introduce pcpu_alloc_info and pcpu_group_info
percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
percpu: add @align to pcpu_fc_alloc_fn_t
percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
percpu: drop @static_size from first chunk allocators
percpu: generalize first chunk allocator selection
percpu: build first chunk allocators selectively
percpu: rename 4k first chunk allocator to page
percpu: improve boot messages
percpu: fix pcpu_reclaim() locking
...
Fix trivial conflict as by Tejun Heo in kernel/sched.c
Conflicts:
arch/sparc/kernel/smp_64.c
arch/x86/kernel/cpu/perf_counter.c
arch/x86/kernel/setup_percpu.c
drivers/cpufreq/cpufreq_ondemand.c
mm/percpu.c
Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Turning on this flag could prevent the compiler from optimising away
some "useless" checks for null pointers. Such bugs can sometimes become
exploitable at compile time because of the -O2 optimisation.
See http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Optimize-Options.html
An example that clearly shows this 'problem' is commit 6bf67672.
static void __devexit agnx_pci_remove(struct pci_dev *pdev)
{
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- struct agnx_priv *priv = dev->priv;
+ struct agnx_priv *priv;
AGNX_TRACE;
if (!dev)
return;
+ priv = dev->priv;
By reverting this patch, and compile it with and without
-fno-delete-null-pointer-checks flag, we can see that the check for dev
is compiled away.
call printk #
- testq %r12, %r12 # dev
- je .L94 #,
movq %r12, %rdi # dev,
Clearly the 'fix' is to stop using dev before it is tested, but building
with -fno-delete-null-pointer-checks flag at least makes it harder to
abuse.
Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: Wang Cong <amwang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This causes kernel images that don't run init to completion with certain
broken gcc versions.
This fixes kernel bugzilla entry:
http://bugzilla.kernel.org/show_bug.cgi?id=13012
I suspect the gcc problem is this:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230
Fix the problem by using the -fno-strict-overflow flag instead, which
not only does not exist in the known-to-be-broken versions of gcc (it
was introduced later than fwrapv), but seems to be much less disturbing
to gcc too: the difference in the generated code by -fno-strict-overflow
are smaller (compared to using neither flag) than when using -fwrapv.
Reported-by: Barry K. Nathan <barryn@pobox.com>
Pushed-by: Frans Pop <elendil@planet.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes. As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.
Conflicts:
arch/alpha/include/asm/percpu.h
arch/mn10300/kernel/vmlinux.lds.S
include/linux/percpu-defs.h
Some distributions have enabled the gcc flag -Wformat-security by default.
This results in a number of warnings about format arguments to functions,
sometimes in cases where fixing the warning is not likely to actually fix a
bug. Instead of hand patching a dozens of places (possibly more) that produce
warnings that get ignored anyway we just turn off the flag in the Makefile.
Signed-off-by: Floris Kraak <randakar@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
x86 throws away .discard section but no other archs do. Also,
.discard is not thrown away while linking modules. Make every arch
and module linking throw it away. This will be used to define dummy
variables for percpu declarations and definitions.
This patch is based on Ivan Kokshaysky's alpha percpu patch.
[ Impact: always throw away everything in .discard ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel. gcov may be useful for:
* debugging (has this code been reached at all?)
* test improvement (how do I change my test to cover these lines?)
* minimizing kernel configurations (do I need this option if the
associated code is never run?)
The profiling patch incorporates the following changes:
* change kbuild to include profiling flags
* provide functions needed by profiling code
* present profiling data as files in debugfs
Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.
For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).
[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (53 commits)
.gitignore: ignore *.lzma files
kbuild: add generic --set-str option to scripts/config
kbuild: simplify argument loop in scripts/config
kbuild: handle non-existing options in scripts/config
kallsyms: generalize text region handling
kallsyms: support kernel symbols in Blackfin on-chip memory
documentation: make version fix
kbuild: fix a compile warning
gitignore: Add GNU GLOBAL files to top .gitignore
kbuild: fix delay in setlocalversion on readonly source
README: fix misleading pointer to the defconf directory
vmlinux.lds.h update
kernel-doc: cleanup perl script
Improve vmlinux.lds.h support for arch specific linker scripts
kbuild: fix headers_exports with boolean expression
kbuild/headers_check: refine extern check
kbuild: fix "Argument list too long" error for "make headers_check",
ignore *.patch files
Remove bashisms from scripts
menu: fix embedded menu presentation
...
The GNU make's origin function know undefined variable well,
so the outer ifdef/endif conditional checking is unneeded.
From `info make` documentation, origin will return
`undefined'
if VARIABLE was never defined.
`command line'
if VARIABLE was defined on the command line.
...
Therefore, $(origin V) will get a value anyway, killing ifdef/endif is
viable and safe.
Furthermore, I've checked the minimal requirements from
Documentation/Changes is GNU make 3.79.1, and that version of GNU make
has support of origin function well already, so now it's safe to kill
the outer conditional checking, without upgrading the minimal
requirements.
Signed-off-by: Cheng Renquan <crq@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The checking of CONFIG_FRAME_WARN in the top level Makefile forgot to
actually derefence the variable thus leading to an always true check.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct the Makefile help text to read "make modules_prepare".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We need a location for generated files.
Today they are spread over several places and bringing them
together to a common place makes it obvious hat is generated
and what isreal files.
Al Viro originally suggested: include/gen
Linus suggested to spell it out.
This patch implement support for
include/generated
All files in include/generated are ignored by git.
include/generated is removed during "make mrproper".
With this we are ready to implement support for include/generated
in the various architctures and in the base kernel.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Make it possible for the linker to discard local symbols from vmlinux as
they cause vmlinux to balloon when CONFIG_KALLSYMS=y and they cause
dump_stack() and get_wchan() to produce useless information under some
circumstances.
With this we add a config option (CONFIG_STRIP_ASM_SYMS) that will cause
the build to supply -X to the linker to tell it to strip temporary local
symbols.
This doesn't seem to cause gdb any problems.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This adds in support for building with ARCH=sh64 using the sh SRCARCH.
This tidies up the randconfig generation somewhat to make sure that we
don't end up with impossible configurations, and without having to rely
on things like KCONFIG_ALLCONFIG to detect the proper CPU support subset.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
With a sufficiently new compiler and binutils, code which wasn't
previously generating .eh_frame sections has begun to. Certain
architectures (powerpc, in this case) may generate unexpected relocation
formats in response to this, preventing modules from loading.
While the new relocation types should probably be handled, revert to the
previous behaviour with regards to generation of .eh_frame sections.
(This was reported against Fedora, which appears to be the only distro
doing any building against gcc-4.4 at present: RH bz#486545.)
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Alexandre Oliva <aoliva@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sam Ravnborg says:
"We have several architectures that plays strange games with $(CC) and
$(CROSS_COMPILE).
So we need to postpone any use of $(call cc-option..) until we have
included the arch specific Makefile so we try with the correct $(CC)
version."
Requested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes sure that gcc doesn't try to optimize away wrapping
arithmetic, which the kernel occasionally uses for overflow testing, ie
things like
if (ptr + offset < ptr)
which technically is undefined for non-unsigned types. See
http://bugzilla.kernel.org/show_bug.cgi?id=12597
for details.
Not all versions of gcc support it, so we need to make it conditional
(it looks like it was introduced in gcc-3.4).
Reminded-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Following a thread on busybox mailing list
depmod -r option is ignored by module-init-tools depmod
-r option break busybox depmod.
So the best solution look to remove -r from kernel Makefile
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source
tree under SCM. This is due to KERNELRELEASE being different when the initial make
is run and when make is run from rpmbuild.
mkspec creates kernel.spec using KERNELRELEASE:
<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>
When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any
additional version info from SCM. Next, the srctree is tarred up and SCM
information is excluded.
rpmbuild reruns make and in the process generates a new include/config/kernel.release
and thus a new KERNELRELEASE. However this time the SCM information is gone so
KERNELRELEASE no longer has the additional version information. When "make modules_install"
runs, it uses the new KERNELRELEASE value to determine where to install the modules.
This conflicts with where the spec file assumes they are going because of the
mis-matching KERNELRELEASE versions.
<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
INSTALL crypto/aead.ko
INSTALL crypto/cbc.ko
INSTALL crypto/chainiv.ko
INSTALL crypto/crc32c.ko
INSTALL crypto/crypto_algapi.ko
INSTALL crypto/crypto_blkcipher.ko
INSTALL crypto/crypto_hash.ko
INSTALL crypto/cryptomgr.ko
INSTALL crypto/ecb.ko
INSTALL crypto/eseqiv.ko
INSTALL crypto/krng.ko
INSTALL crypto/md5.ko
INSTALL crypto/pcbc.ko
INSTALL crypto/rng.ko
INSTALL drivers/block/cciss.ko
INSTALL drivers/hid/hid-dummy.ko
INSTALL drivers/scsi/iscsi_tcp.ko
INSTALL drivers/scsi/libiscsi.ko
INSTALL drivers/scsi/libiscsi_tcp.ko
INSTALL drivers/scsi/scsi_transport_iscsi.ko
INSTALL drivers/scsi/scsi_wait_scan.ko
INSTALL fs/lockd/lockd.ko
INSTALL fs/nfs/nfs.ko
INSTALL fs/nfsd/nfsd.ko
INSTALL lib/libcrc32c.ko
INSTALL net/sunrpc/sunrpc.ko
DEPMOD 2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
RPM build errors:
File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>
I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both
with and without CONFIG_LOCALVERSION_AUTO=y.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
----
It's useful to already have the source symlink in a
objdir when one just runs make *config. Then one
can do
mkdir obj-allyes
cd obj-allyes
make -C ../sourcedir O=$(pwd) allyesconfig
./source/scripts/config --disable debug_info
make CC=icecc -j18
without having to interrupt the make first just to
get the source symlink.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[sam: deleted the other source symlink statement]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Impact: no default -fno-stack-protector if stackp is enabled, cleanup
Stackprotector make rules had the following problems.
* cc support test and warning are scattered across makefile and
kernel/panic.c.
* -fno-stack-protector was always added regardless of configuration.
Update such that cc support test and warning are contained in makefile
and -fno-stack-protector is added iff stackp is turned off. While at
it, prepare for 32bit support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge header files for m68k and m68knommu to the single location:
arch/m68k/include/asm
The majority of this patch was the result of the
script that is included in the changelog below.
The script was originally written by Arnd Bergman and
exten by me to cover a few more files.
When the header files differed the script uses the following:
The original m68k file is named <file>_mm.h [mm for memory manager]
The m68knommu file is named <file>_no.h [no for no memory manager]
The files uses the following include guard:
This include gaurd works as the m68knommu toolchain set
the __uClinux__ symbol - so this should work in userspace too.
Merging the header files for m68k and m68knommu exposes the
(unexpected?) ABI differences thus it is easier to actually
identify these and thus to fix them.
The commit has been build tested with both a m68k and
a m68knommu toolchain - with success.
The commit has also been tested with "make headers_check"
and this patch fixes make headers_check for m68knommu.
The script used:
TARGET=arch/m68k/include/asm
SOURCE=arch/m68knommu/include/asm
INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \
linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \
oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \
shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \
termbits.h termios.h tlb.h types.h user.h"
EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \
ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \
sections.h topology.h"
NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \
elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \
m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \
m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \
m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \
mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \
mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \
nettel.h quicc_simple.h smp.h"
FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \
cacheflush.h checksum.h current.h delay.h div64.h \
dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \
irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \
module.h page.h page_offset.h param.h pci.h pgalloc.h \
pgtable.h processor.h ptrace.h scatterlist.h segment.h \
setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \
thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \
unaligned.h unistd.h"
mergefile() {
BASE=${1%.h}
git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h
git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h
cat << EOF > ${TARGET}/$1
EOF
git add ${TARGET}/$1
}
set -e
mkdir -p ${TARGET}
git mv include/asm-m68k/* ${TARGET}
rmdir include/asm-m68k
git rm ${SOURCE}/Kbuild
for F in $INCLUDE $EQUAL; do
git rm ${SOURCE}/$F
done
for F in $NOMUUFILES; do
git mv ${SOURCE}/$F ${TARGET}/$F
done
for F in $FILES ; do
mergefile $F
done
rmdir arch/m68knommu/include/asm
rmdir arch/m68knommu/include
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
This reverts commit ad7a953c52.
And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL")
9bb482476c
These stripping patches has caused a set of issues:
1) People have reported compatibility issues with binutils due to
lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2
Reported by: Wenji
2) ccache and distcc no longer works as expeced
Reported by: Ted, Roland, + others
3) The installed modules increased a lot in size
Reported by: Ted, Davej + others
Reported-by: Wenji Huang <wenji.huang@oracle.com>
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation
kbuild: add a symlink to the source for separate objdirs
kconfig: add script to manipulate .config files on the command line
kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope
bootchart: improve output based on Dave Jones' feedback
fix modules_install via NFS
qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types
I have some scripts which need to map back to the source directory
from an objdir. This was so far done by parsing the Makefile,
but the Makefile format changes occasionally and breaks my scripts
then.
To make this more reliable add a "source" symlink back.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The sparse warning -Wreturn-void ("returning void-valued expression")
is off by default, but it is enabled with -Wall, so add
-Wno-return-void to CHECKFLAGS to disable it.
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
kbuild: strip generated symbols from *.ko
kbuild: simplify use of genksyms
kernel-doc: check for extra kernel-doc notations
kbuild: add headerdep used to detect inclusion cycles in header files
kbuild: fix string equality testing in tags.sh
kbuild: fix make tags/cscope
kbuild: fix make incompatibility
kbuild: remove TAR_IGNORE
setlocalversion: add git-svn support
setlocalversion: print correct subversion revision
scripts: improve the decodecode script
scripts/package: allow custom options to rpm
genksyms: allow to ignore symbol checksum changes
genksyms: track symbol checksum changes
tags and cscope support really belongs in a shell script
kconfig: fix options to check-lxdialog.sh
kbuild: gen_init_cpio expands shell variables in file names
remove bashisms from scripts/extract-ikconfig
kbuild: teach mkmakfile to be silent
...
Building upon parts of the module stripping patch, this patch
introduces similar stripping for vmlinux when CONFIG_KALLSYMS_ALL=y.
Using CONFIG_KALLSYMS_STRIP_GENERATED reduces the overhead of
CONFIG_KALLSYMS_ALL from 245k/310k to 65k/80k for the (i386/x86-64)
kernels I tested with.
The patch also does away with the need to special case the kallsyms-
internal symbols by making them available even in the first linking
stage.
While it is a generated file, the patch includes the changes to
scripts/genksyms/keywords.c_shipped, as I'm unsure what the procedure
here is.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch changes the way __crc_ symbols are being resolved from
using ld to do so to using the assembler, thus allowing these symbols
to be marked local (the linker creates then as global ones) and hence
allow stripping (for modules) or ignoring (for vmlinux) them. While at
this, also strip other generated symbols during module installation.
One potentially debatable point is the handling of the flags passeed
to gcc when translating the intermediate assembly file into an object:
passing $(c_flags) unchanged doesn't work as gcc passes --gdwarf2 to
gas whenever is sees any -g* option, even for -g0, and despite the
fact that the compiler would have already produced all necessary debug
info in the C->assembly translation phase. I took the approach of just
filtering out all -g* options, but an alternative to such negative
filtering might be to have a positive filter which might, in the ideal
case allow just all the -Wa,* options to pass through.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
"Paul Smith" <psmith@gnu.org> reported that we would fail
to build with a new check that may be enabled in an
upcoming version of make.
The error was:
Makefile:442: *** mixed implicit and normal rules. Stop.
The problem is that we did stuff like this:
config %config: ...
The solution was simple - the above was split into two with identical
prerequisites and commands.
With only three lines it was not worth to try to avoid the duplication.
Cc: "Paul Smith" <psmith@gnu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To unify Makefile for sparc and sparc64 a few other steps was needed:
1) separate defconfig files for sparc and sparc64 is required,
so locate these in arch/sparc/configs
2) removoval of hack in toplevel Makefile to deal with that
headers was in a separate directory compared to the rest
The unification of the Makefile required usage of several
foo-$(CONFIG_SPARCnn) +=
due to a few directories pending unification.
This will be cleaned up when we unify the remaining directories.
Included in this patch are the deletion of a few files in
sparc64 as they are no longer needed: Makefile + Kconfig.
arch/sparc64/ will after this patch is applied only
have four directories (prom, lib, kernel, boot)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
as they do not benefit from the make functionality.
Moving the support to a shell script has several benefits:
- The readability of the code has increased a lot
- More people is able to extend the tags support
- We see less changes to the top-level Makefile
The shell script version includes improvements from:
Alexey Dobriyan <adobriyan@gmail.com> (jump to kconfig symbols)
Alexey Dobriyan <adobriyan@gmail.com> (drop ./ in paths)
Ian Campbell <ijc@hellion.org.uk> (simplified find algorithms)
This version has a few caveats:
=> It does not support ALLSOURCE_ARCHS
- it is easy to add if it is really used
=> It assumes all archs have moved to arch/$ARCH/include
- until that happens we have a few additional hits in the archs
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Convert a few echos in the build system to new $(kecho) so we get correct
output according to build verbosity.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: added kecho in a few more places for O=... builds]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
kbuild failed to expand include flags in KBUILD_CPPFLAGS
resulting in code like this in arch Makefiles:
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += -Iinclude/foo
else
KBUILD_CPPFLAGS += -I$(srctree)/include/foo
endif
Move use of LINUXINCLUDE into Makefile.lib to allow
us to expand -I directives of KBUILD_CPPFLAGS so
we can avoid the above code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Architectures which have moved their includes to arch/<ARCH>/include
now list the headers twice in the source listing used by "make
cscope" and friends, causing those tools to list symbols twice.
Skipping these files in the ALLSOURCE_ARCHS pass rather than removing
the ALLINCLUDE_ARCHS pass preserves the semantics of the later.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
o if include/asm point to a nonexisting directory remove the asm symlink
o if include/asm is a directory error out
This fixes a situation where one could be left with a symlink
to asm-x86 but that directory no longer exist and thus the build
would error out.
include/asm may be a directory if the kernel tree has been copied
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile
is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>.
Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter
would be top-level one (and include the pieces of the former).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently source files in the Documentation/ sub-dir can easily bit-rot
since they are not generally buildable, either because they are hidden in
text files or because there are no Makefile rules for them. This needs to
be fixed so that the source files remain usable and good examples of code
instead of bad examples.
Add the ability to build source files that are in the Documentation/ dir.
Add to Kconfig as "BUILD_DOCSRC" config symbol.
Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the
Documentation/ sources. Or enable BUILD_DOCSRC in the *config system.
However, this symbol depends on HEADERS_CHECK since the header files need
to be installed (for userspace builds).
Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32,
sparc64, powerpc, sh, m68k, & mips.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's a problem about cscope target of kernel Makefile, and the cscope
plugin of emacs:
1. `make cscope` will generate cscope.files cscope.{in,po,}.out;
2. the cscope plugin expect a cscope.out.{in,po,};
3. the default `cscope -b` would generate cscope.{in,po,}.out;
There are three approach to solve it:
1. modify the cscope C code;
2. modify the cscope emacs plugin lisp code;
3. modify the Makefile;
I have tried to communicate with the cscope upstream, but later I
realize the third approach is most meaningful.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With a make O=... build kbuild would only create
the include2/asm symlink for archs that not yet
had moved headers to include/$ARCH/include
There is no longer any reason to avoid the symlink
for archs that has moved their headers so create it
unconditionally.
This fixes arm because kbuild checked for include/asm-$ARCH/errno.h
and that file was not present for arm but the platform files
are not yet moved.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
We used include/asm-$ARCH/system.h to check if
we should create a symlink in include2 directory with
make O=... builds.
But um does not have such a file thus build filed.
Let's try anohter filename:
$ ls -d include/asm-* | wc -l
21
$ ls -d include/asm-*/errno.h | wc -l
21
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
The majority of this patch was created by the following script:
***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***
The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
setlocalversion: do not describe if there is nothing to describe
kconfig: fix typos: "Suport" -> "Support"
kconfig: make defconfig is no longer chatty
kconfig: make oldconfig is now less chatty
kconfig: speed up all*config + randconfig
kconfig: set all new symbols automatically
kconfig: add diffconfig utility
kbuild: remove Module.markers during mrproper
kbuild: sparse needs CF not CHECKFLAGS
kernel-doc: handle/strip __init
vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
init: fix URL of "The GNU Accounting Utilities"
kbuild: add arch/$ARCH/include to search path
kbuild: asm symlink support for arch/$ARCH/include
kbuild: support arch/$ARCH/include for tags, cscope
kbuild: prepare headers_* for arch/$ARCH/include
kbuild: install all headers when arch is changed
kbuild: make clean removes *.o.* as well
kbuild: optimize headers_* targets
kbuild: only one call for include/ in make headers_*
...
This patch conclude the support for
arch/$ARCH/include
Note: The individual architectures will most likely require
a few minor patches to support locating header files in
arch/$ARCH/include
Testing shows that it worked out-of-the-box for sparc.
x86 required a few trivial changes in the arch
specific Makefile and a few include paths had to be adjusted.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Adjust the asm symlink support so we do not create the
symlink unless really needed.
We check the precense of include/asm-$ARCH by checking
for the system.h file. We may end up with a stale directory
so it is not enough to check if the directory is present.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Factor out the headers_*_all support to a seperate
shell script and add support for arch specific
header files can be located in either
arch/$ARCH/include/asm
or
include/asm-$ARCH/
In "make help" always display the headers_* targets.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Those are left presumably from aborted ccache(1) compilations:
arch/x86/kernel/.tmp_io_apic_64.o.T5veul
arch/x86/kvm/.tmp_x86.o.SZWn69
arch/x86/mm/.tmp_pgtable.o.sL1LTf
drivers/ieee1394/.tmp_ieee1394_transactions.o.bUj6o1
drivers/infiniband/hw/mlx4/.tmp_main.o.vy0ep6
BTW, with git there is nice way to check for such nuisainces:
make mrproper
git-ls-files -o
should give empty output.
More precise wildcard spec from: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jan Engelhardt <jengelh@medozas.de>
Move it to the top-level file to decide if we install/check
the generic headers or the arch specific headers.
This revealed a long standing bug where "make headers_check_all"
relied on the files in asm/ for the current architecture.
So make headers_check_all is now broken by this commit.
In addition:
o add a simpler way to detect if an arch support
exporting header files.
o add 'set -e;' so we error out early if
make headers_check_all fails.
o add sparc64 and cris to arch we do not process
in make headers_*_all because:
sparc64 - use sparc to export headers
cris - is know seriously broken
Includes suggestions from: David Woodhouse
<dwmw2@infradead.org>.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Fix the a.out.h case by setting SRCARCH and error
out early in case of an error.
The a.out.h case failed with the *_all targets.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
o Use lower case for local variables
o Add a helper target for common targets
o Use $(hdr-inst)= ... to make Make invocations simpler
o Add -rR to make invocations
In total this adds more lines than it removes but the
benefit is better readability
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
This means that we no longer need write access to the source tree while
doing 'make modules_install'.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
When a kernel was rebuilt, the previous Module.markers was not cleared.
It caused markers with different format strings to appear as duplicates
when a markers was changed. This problem is present since
scripts/mod/modpost.c started to generate Module.markers, commit
b2e3e658b3
It therefore applies to 2.6.25, 2.6.26 and linux-next.
I merely merged the patches from Roland, Wenji and Takashi here.
Credits to
Roland McGrath <roland@redhat.com>
Wenji Huang <wenji.huang@oracle.com>
and
Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
for providing the individual fixes.
- Changelog :
- Integrated Takashi's Makefile modification to clear Module.markers upon
make clean.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Roland McGrath <roland@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch named "powerpc/mpc5121: Add clock driver", also contained
an unrelated and bogus change to the top-level makefile. This patch
backs out the bad bit.
SHA1 of offending patch: 137e95906e)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Repented-by: John Rigby <jrigby@freescale.com>
[ Heh. Normally I pick these out from the diffstats, but I guess
I've grown to trust the ppc tree too much ;) - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Crosscompiling on a Fedora 9 machine running gcc 4.3.0 as its host compiler
and gcc 3.4.6 for the mips-linux target results in the following build
error:
$ make malta_defconfig
$ make
cc1: error: unrecognized command line option "-fno-stack-protector"
scripts/kconfig/conf -s arch/mips/Kconfig
cc1: error: unrecognized command line option "-fno-stack-protector"
The arch Makefile is included too late so the host compiler is feature
tested, not the crosscompiler as intended and thus the Makefile applies
adds -fno-stack-protector to crosscompiler's flags which fails for gcc
3.4.6. The bug was introduced by e06b8b98da
in 2.6.25; 35bb5b1e0e did add more flags
testing before the arch Makefile inclusion.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6: (64 commits)
firmware: convert sb16_csp driver to use firmware loader exclusively
dsp56k: use request_firmware
edgeport-ti: use request_firmware()
edgeport: use request_firmware()
vicam: use request_firmware()
dabusb: use request_firmware()
cpia2: use request_firmware()
ip2: use request_firmware()
firmware: convert Ambassador ATM driver to request_firmware()
whiteheat: use request_firmware()
ti_usb_3410_5052: use request_firmware()
emi62: use request_firmware()
emi26: use request_firmware()
keyspan_pda: use request_firmware()
keyspan: use request_firmware()
ttusb-budget: use request_firmware()
kaweth: use request_firmware()
smctr: use request_firmware()
firmware: convert ymfpci driver to use firmware loader exclusively
firmware: convert maestro3 driver to use firmware loader exclusively
...
Fix up trivial conflicts with BKL removal in drivers/char/dsp56k.c and
drivers/char/ip2/ip2main.c manually.
Plugs into the generic powerpc clock driver in
arch/powerpc/kernel/clock.c
The following subset of clk_interface is implemented:
clk_get, clk_put: get clock via name, release clock
clk_enable, clk_disable: enable or disable clock
clk_get_rate: get clock rate in Hz
clk_set_rate: stubbed
clk_round_rate: stubbed
clk_set_parent: NULL
clk_get_parent: NULL
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
For 'make modules_install', install any firmware required by
the modules which are being installed.
Also add a 'make firmware_install' target which doesn't depend on the
configuration, but installs _all_ available in-kernel-tree firmware into
$(INSTALL_FW_PATH), which defaults to /lib/firmware. This is intended
for distributors to make arch-independent (and config-independent)
packages containing firmware.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This allows arbitrary firmware files to be included in the static kernel
where the firmware loader can find them without requiring userspace to
be alive.
(Updated and CONFIG_EXTRA_FIRMWARE_DIR added with lots of help from
Johannes Berg).
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.
The ftrace routine will then call a registered function if a function
happens to be registered.
[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
so don't blame Arnaldo for all of this ;-) ]
Update:
It is now possible to register more than one ftrace function.
If only one ftrace function is registered, that will be the
function that ftrace calls directly. If more than one function
is registered, then ftrace will call a function that will loop
through the functions to call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
Don't clean bounds.h and asm-offsets.h
kconfig: incorrect 'len' field initialisation ?
kernel-doc: allow unnamed bit-fields
kbuild: filter away debug symbols from kernel symbols
Remove *.rej pattern from .gitignore
MAINTAINERS: document names of new kbuild trees
kbuild: disable modpost warnings for linkonce sections
kbuild: escape meta characters in regular expression in make TAGS
Since 97965478a6 ("mm: Get rid of __ZONE_COUNT")
mmzone.h includes bounds.h.
Calling make clean after make prepare removes bounds.h
again so when building external modules this fails.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
--
Alexey Dobriyan <adobriyan@gmail.com> introduced a code adds
menuconfig SOMETHING in Kconfig to tags output when you did "make tags".
See http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=80ff26241623875636674a31c0540a78c0fb5433
"make tags" may work fine with his code. However make TAGS doesn't work well
because etags command requires backslashes to escape meta characters like
`(', `)' and `|'.
Here is a patch.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
PowerPC will start moving board defconfigs into subarch-specific
subdirs soon. "make help" currently does not look in subdirs to
find the defconfigs to show. This is partially a good thing,
since there are way too many defconfigs for one list.
This patch makes the main "make help" display something like
help-40x - Show 40x-specific targets
help-44x - Show 44x-specific targets
help-boards - Show all of the above
and wires up stuff so those new help-* commands actually work.
[sam: fixed it up to display x86 defconfigs too]
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add option to enable -Wframe-larger-than= on gcc 4.4
gcc mainline (upcoming 4.4) added a new -Wframe-larger-than=...
option to warn at build time about too large stack frames. Add a config
option to enable this warning, since this very useful for the kernel.
I choose (somewhat arbitarily) 2048 as default warning threshold for 64bit
and 1024 as default for 32bit architectures. With some research and
fixing all the code for smaller values these defaults should be probably
lowered.
With the default allyesconfigs have some new warnings, but I think
that is all code that should be just fixed.
At some point (when gcc 4.4 is released and widely used) this should
obsolete make checkstack
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This snuck in through 919ee677b6
("[SPARC64]: Add NUMA support")
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently there is only code to parse NUMA attributes on
sun4v/niagara systems, but later on we will add such parsing
for older systems.
Signed-off-by: David S. Miller <davem@davemloft.net>
It should be "if" but is written as "is"..
Signed-off-by: Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
The module alias support in the kernel have a consistency
check where it is checked that the size of a structure
in the kernel and on the build host are the same.
For cross builds this check does not make sense so detect
when we do cross builds and silently skip the check in these
situations.
This fixes a build bug for a wireless driver when cross building
for arm.
Acked-by: Michael Buesch <mb@bu3sch.de>
Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@kernel.org
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
kbuild: explain why DEBUG_SECTION_MISMATCH is UNDEFINED
kbuild: fix building vmlinux.o
kbuild: allow -fstack-protector to take effect
kconfig: fix select in combination with default
Ingo Molnar wrote:
>
> i've got a build log from a weird build error below:
>
> LD init/built-in.o
> distcc[12023] ERROR: compile (null) on localhost failed
> make: *** [vmlinux.o] Error 1
> make: *** Waiting for unfinished jobs....
> LD .tmp_vmlinux1
>
Building vmlinux.o were moved up in the dependency chain so we started
to build it before the kallsym stuff. This was done to let modpost
report section mismatch bugs even when the final link failed.
Originally I had expected the dependency of $(kallsyms.o) to
cover this but it turns out that we need to be even more explicit.
Fix this by adding a conditional dependency on firat target
used in the kallsyms serie of builds.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Arjan van de Ven <arjan@infradead.org> wrote:
===
I just read the excellent LWN writeup of the vmsplice
security thing, and that got me wondering why this attack
wasn't stopped by the CONFIG_CC_STACKPROTECTOR option...
because it plain should have been...
Some analysis later.. it turns out that the following line
in the top level Makefile, added by you in October 2007,
entirely disables CONFIG_CC_STACKPROTECTOR ;(
With this line removed the exploit will be nicely stopped.
CFLAGS += $(call cc-option, -fno-stack-protector)
Now I realize that certain distros have patched gcc to
compensate for their lack of distro wide CFLAGS, and it's
great to work around that... but would there be a way to NOT
disable this for CONFIG_CC_STACKPROTECTOR please?
It would have made this exploit not possible for those kernels
that enable this feature (and that includes distros like Fedora)
===
Move the assignment to KBUILD_CFLAGS up before including
the arch specific Makefile so arch makefiles may override
the setting.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: stable@kernel.org
.. and I really need to call it something else. Maybe it is time to
bring back the weasel series, since weasels always make me feel good
about a kernel.
link vmlinux.o so we may report section mismatch bugs before
we start with the real link - that may error out.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Setting the option DEBUG_SECTION_MISMATCH will
report additional section mismatch'es but this
should in the end makes it possible to get rid of
all of them.
See help text in lib/Kconfig.debug for details.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The output of 'make help' covers a lot of options, but doesn't include
a listing for 'make prepare'. Here's a one-liner to fix that...
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With this patch I'm able to find the definition of _xmit_lock defined in
include/linux/netdevice.h as follows:
struct net_device {
...
spinlock_t _xmit_lock ____cacheline_aligned_in_smp;
}
Otherwise this counts as definition of ____cacheline_aligned_in_smp.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile. This implicit ordering is lost for loadable
modules.
When driver modules are loaded by udev, what comes first in
modules.alias file is selected. However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules). This causes confusion.
The solution is two-parted. This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile. The second part is update to
depmod such that it generates output files according to this file.
Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.
Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add missing $(srctree)/ prefix for scripts used by the includecheck and
versioncheck make targets
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add 'includecheck' to the Static analyzers help list.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Change two occurances of "behavour" to "behaviour".
Signed-off-by: Linus Nilsson <lajnold@acc.umu.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The check introduced in commit:
4f1127e204 "kbuild: fix
infinite make recursion"
caused certain external modules not to build and
also caused 'make targz-pkg' to fail.
This is a minimal fix so we revert to previous
behaviour - but we do not overwrite the Makefile
in the top-level directory.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Jay Cliburn <jacliburn@bellsouth.net>
Cc: Jay Cliburn <jacliburn@bellsouth.net>
Jan Altenberg <jan.altenberg@linutronix.de> reported that
building with redirected input like this failed:
make O=dir oldconfig bzImage < /dev/null
The problem were caused by a make silentoldconfig being
run before oldconfig and with a non-recent .config the build
failed because silentoldconfig requires non-redirected stdin.
Silentoldconfig was run as a side-effect of having the
top-level Makefile re-made by make.
Introducing an empty rule for the top-level Makefile
(and Kbuild.include) fixed the issue.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Simplify "make ARCH=x86" and fix kconfig so we again
can set 64BIT in all.config.
For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)
The patch reverts these commits:
0f855aa64b
-> kconfig: add helper to set config symbol from environment variable
2a113281f5
-> kconfig: use $K64BIT to set 64BIT with all*config targets
Roman Zippel pointed out that kconfig supported string
compares so the additional complexity introduced by the
above two patches were not needed.
With this patch we have following behaviour:
# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit
The general rule are that ARCH= and native architecture
takes precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit
kernel no matter what the configuration says.
The configuration will be updated to 32-bit if it was
configured to 64-bit and the other way around.
This behaviour is consistent with previous behaviour so
no suprises here.
make ARCH=x86 will per default result in a 32-bit kernel
but as the only ARCH= value x86 allow the user to select
between 32-bit and 64-bit using menuconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
The x86 merge modified the tags target to handle the two separate
source directories. Remove it now that i386/x86_64 are gone completely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".
With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
=> select 64-bit
Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
For x86 ARCH may say i386 or x86_64 and soon x86.
Rely on CONFIG_X64_32 to select between 32/64 or just
hardcode the value as appropriate.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Too many people have CFLAGS set to support building userspace.
And now Kbuild picks up CFLAGS this caused troubles.
Although people should realise that setting CFLAGS has
a 'global' effect the impact on the kernel build is a suprise.
So change kbuild to pick up value from KCFLAGS that is
much less used.
When kbuild pick up a value it will warn like this:
Makefile:544: "WARNING: Appending $KCFLAGS (-O3) from environment to kernel $CFLAGS"
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bächler <thomas@archlinux.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
When configuring the kernel natively the uname matching is off,
so fix up the uname mangling to get the proper SUBARCH. Needs
an explicit range so that SH-5 doesn't break.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Moving the ARCH specific Makefiles for i386 and x86_64
required a litle bit tweaking in the top-lvel Makefile.
SRCARCH is now set in the top-level Makefile
because we need this info to include the correct
arch Makefile.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The patch is big. Really big. You just won't believe how vastly hugely
mindbogglingly big it is. I mean you may think it's a long way down the
road to the chemist, but that's just peanuts to how big the patch from
2.6.23 is.
But it's all good.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
depmod from module-init-tools 3.3-pre2 are reported
to work fine in cross build.
depmod from module-init-tools 3.1-pre5 are known to SEGV
Do not workaround older module-init-tools bugs here.
The right fix is for users to upgrade module-init-tools.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
make vmlinux would delete the content of $(MODVERDIR)
equals .tmp_versions. This caused a subsequent
make modules_install to fail.
Fix it so we clean the directory only for the
modules build - but we still unconditionally create it so
we can do:
make dir/file.ko
without a preceeding make modules.
Reported by David Miller <davem@davemloft.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Miller <davem@davemloft.net>
This removes a syntax error (seen building on Ubuntu Feisty).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
kbuild: fix first module build
kconfig: update kconfig-language text
kbuild: introduce cc-cross-prefix
kbuild: disable depmod in cross-compile kernel build
kbuild: make deb-pkg - add 'Provides:' line
kconfig: comment typo in scripts/kconfig/Makefile.
kbuild: stop docproc segfaulting when SRCTREE isn't set.
kbuild: modpost problem when symbols move from one module to another
kbuild: cscope - filter out .tmp_* in find_sources
kbuild: mailing list has moved
kbuild: check asm symlink when building a kernel
When building a specific module before doing a total kernel
build it failed because $(MORVERDIR) were missing.
Creating the MODVERDIR explicit (independent of KBUILD_MODULES)
fixed this. As a side-effect the MODVERDIR will be created
also for a non-module build - but no harm done by that.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Begin infrastructure for kernel code samples in the samples/ directory.
Add its Kconfig and Kbuild files.
Source its Kconfig file in all arch/ Kconfigs.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building embedded systems in a cross-compile environment and
populating a target's file system image, we don't want to run the
depmod on the host as we may be building for a completely different
architecture. Since there's no such thing as a cross-depmod, we
just disable running depmod in the cross-compile case and we just
run depmod on the target at bootup.
Inspired by patches from Christian, Armin and Deepak.
This solves: http://bugzilla.kernel.org/show_bug.cgi?id=3881
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Christian Bjølevik <nafallo@magicalforest.se>
Cc: Deepak Saxena <dsaxena@mvista.com> and
Cc: Armin Kuster <akuster@mvista.com>,
We often hit the situation where the asm symlink
in include/ points to the wrong architecture.
In 9 out of 10 cases thats because we forgot to set
ARCH but sometimes we just reused the same tree
for another ARCH. For the merged x86 tree we need
to create a new symlink but this is not obvious.
So with the following patch we check if the symlink
points to the correct architecture and error
out if this is not the case.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The variable CPPFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
This patch replace use of CPPFLAGS with KBUILD_CPPFLAGS all over the
tree and enabling one to use:
make CPPFLAGS=...
to specify additional CPP commandline options.
Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The previous patches was preparation.
With this patch we can now say:
make CFLAGS=-Os vmlinux
And the option specified will be appended to the
options passed to gcc for C files.
For assembler use:
make AFLAGS=-foo vmlinux
for the same functionality.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.
This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.
Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.
This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.
One usecase is when trying to find gcc bugs but other
use cases has been requested too.
Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k
Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The main feature is that export_report now automatically works
for O= builds.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Change the invocations of make in the output directory Makefile and the
main Makefile for separate object trees to pass all goals to one $(MAKE)
via a new phony target "sub-make" and the existing target _all.
When compiling with separate object directories, a separate make is called
in the context of another directory (from the output directory the main
Makefile is called, the Makefile is then restarted with current directory
set to the object tree). Before this patch, when multiple make command
goals are specified, each target results in a separate make invocation.
With make -j, these invocations may run in parallel, resulting in multiple
commands running in the same directory clobbering each others results.
I did not try to address make -j for mixed dot-config and no-dot-config
targets. Because the order does matter, a solution was not obvious.
Perhaps a simple check for MAKEFLAGS having -j and refusing to run would
be appropriate.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The assembler for a while now supports -gdwarf to generate source line info
just like the C compiler does. Source-level assembly debugging sounds like an
oxymoron, but it is handy to be able to see the right source file and read its
comments rather than just the disassembly. This patch enables -gdwarf for
assembly files when CONFIG_DEBUG_INFO=y and the assembler supports the option.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Jan Engelhardt <jengelh@computergmbh.de> reported:
You can cause a recursion in kbuild/make with the following:
make O=$PWD kernel/time.o
make mrproper
Of course no one would use O=$PWD (that's just the testcase),
but this happened too often:
/ws/linux/linux-2.6.23$ make O=/ws/linux/linux-2.6.23 kernel/time.o
(Oops - should have been O=/ws/linux/obj-2.6.23!)
Fixed by an explicit test for this case - we error
out if output directory and source directory are the same.
Tested-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
At the moment, running `make clean` in an external module directory does a
nice job of cleaning up with one exception: it leaves behind Modules.symvers.
Attached patch adds this file to the clean list for external modules.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Change the $(ARCH) dependency to $(SRCARCH) to honor the x86
namespace for i386 and x86_64.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the headers to include/asm-x86 and fixup the
header install make rules
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Preparatory patch for the source merge of arch/i386 and arch/x86_64
into arch/x86. Make scope and tags aware of SRCARCH
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Preparatory patch for the source merge of arch/i386 and arch/x86_64
into arch/x86. This allows to keep the original arch directories as
stubs for the main Makefiles, Kconfigs et. al during the transition
phase while having the code in the new arch/x86 directory.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg pointed out that Documentation/kbuild/makefiles.txt already
says this is what it's for. This patch makes the reality live up to the
documentation. This fixes the problem of LDFLAGS_BUILD_ID getting into too
many places.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits)
xtensa: use DATA_DATA in xtensa
powerpc: add missing DATA_DATA to powerpc
cris: use DATA_DATA in cris
kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c
kbuild: use -fno-optimize-sibling-calls unconditionally
kconfig: reset generated values only if Kconfig and .config agree.
kbuild: fix the warning when running make tags
kconfig: strip 'CONFIG_' automatically in kernel configuration search
kbuild: use POSIX BRE in headers install target
Whitelist references from __dbe_table to .init
modpost white list pattern adjustment
kbuild: do section mismatch check on full vmlinux
kbuild: whitelist references from variables named _timer to .init.text
kbuild: remove hardcoded _logo names from modpost
kbuild: remove hardcoded apic_es7000 from modpost
kbuild: warn about references from .init.text to .exit.text
kbuild: consolidate section checks
kbuild: refactor code in modpost to improve maintainability
kbuild: ignore section mismatch warnings originating from .note section
kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it
...
This change passes the --build-id when linking the kernel and when linking
modules, if ld supports it. This is a new GNU ld option that synthesizes an
ELF note section inside the read-only data. The note in this section contains
unique identifying bits called the "build ID", which are generated so as to be
different for any two linked ELF files that aren't identical. The build ID
can be recovered from stripped files, memory dumps, etc. and used to look up
the original program built, locate debuginfo or other details or history
associated with it. For normal program linking, the compiler passes
--build-id to ld by default, but the option is needed when using ld directly
as we do.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't have to check for -fno-optimize-sibling-calls since even
gcc 3.2 supports it.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
make tags was giving the below warning.
ctags: Warning: arch/x86_64/kernel/head.S:124: null expansion of name
pattern "\1"
Fix the same by making sure we taken only ENTRY pattern found at the
begining of the line.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Previously we did do the check on the .o files used to link
vmlinux but that failed to find questionable references across
the .o files.
Create a dedicated vmlinux.o file used only for section mismatch checks
that uses the defualt linker script so section does not get renamed.
The vmlinux.o may later be used as part of the the final link of vmlinux
but for now it is used fo section mismatch only.
For a defconfig build this is instant but for an allyesconfig this
add two minutes to a full build (that anyways takes ~2 hours).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add -Werror-implicit-function-declaration
This makes builds fail sooner if something is implicitly defined instead
of having to wait half an hour for it to fail at the linking stage.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Woo-hoo. I'm sure somebody will report a "this doesn't compile, and
I have a new root exploit" five minutes after release, but it still
feels good ;)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's that time of the year again. Summer starts in the US, and people
want to sit at the beach with a new -rc candidate.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c8fdd24725.
It turns out the kernel was correct, and the gcc complaint was a gcc
bug. The preferred stack boundary is expressed not in bytes, but in the
the log2() of the preferred boundary, so "-mpreferred-stack-boundary=2"
is in fact exactly what we want, but a gcc that is compiled for x86-64
will consider it an error (because the 64-bit calling sequence says that
the stack should be 16-byte aligned) even if we are then using "-m32" to
generate 32-bit code.
Noted-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Jan Hubicka <jh@suse.cz>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
kconfig: fix mconf segmentation fault
kbuild: enable use of code from a different dir
kconfig: error out if recursive dependencies are found
kbuild: scripts/basic/fixdep segfault on pathological string-o-death
kconfig: correct minor typo in Kconfig warning message.
kconfig: fix path to modules.txt in Kconfig help
usr/Kconfig: fix typo
kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
kbuild: be more explicit on missing .config file
kbuild: clarify the creation of the LOCALVERSION_AUTO string.
kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
kconfig: refer to qt3 if we cannot find qt libraries
kbuild: handle compressed cpio initramfs-es
kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
kbuild: remove stale comment in modpost.c
kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
kbuild: fix make mrproper for Documentation/DocBook/man
kbuild: remove kconfig binaries during make mrproper
kconfig/menuconfig: do not hardcode '.config'
kbuild: override build timestamp & version
...
Move tags extracted from the ARCH and include/ sub-trees ahead of
those from device drivers, so that the former will appear first
during searches.
Saves user time during interactive searches for certain patterns
that happen to find unwanted matches in driver files.
Example in emacs:
"M-x find-tag PAGE_SIZE"
"M-1 M-." (repeated until definition from asm-i386/page.h appears)
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
vmlinux does not contain relocation entries which is
used by the section mismatch checks.
Reported by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Use the individual objects as inputs to overcome
this limitation.
In modpost check the .o files and skip non-ELF files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The kernel only supports gcc 3.2+ now so it doesn't make sense
anymore to explicitely check for options this compiler version
already has.
This actually fixes a bug. The -mprefered-stack-boundary check
never worked because gcc rightly complains
CC arch/i386/kernel/asm-offsets.s
cc1: -mpreferred-stack-boundary=2 is not between 4 and 12
We just never saw the error because of cc-options.
I changed it to 4 to actually work.
Tested by compiling i386 and x86-64 defconfig with gcc 3.2.
Should speed up the build time a tiny bit and improve
stack usage on i386 slightly.
Signed-off-by: Andi Kleen <ak@suse.de>
I tend to prefer to not have to cut an -rc7, but we still have some
network device driver and suspend issues. So here's -rc7.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. hopefully most of the resume/suspend problems introduced by the timer
and other changes are behind us.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Too many changes for comfort since -rc1. Some missed merges, and some
just annoyingly big fixes since. This is not how an -rc2 should look.
Need to really calm things down!
Add new headers_check_all target for checking all arches in one go.
Useful for distros (and people with too much time on their hands) that support
a ton of architectures, headers_check_all is to headers_check as
headers_install_all is to headers_install
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove references to the deprecated "make prepare-all" target from the
top-level Makefile; use just "make prepare" instead.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we look in both source and object directories for localversion*
files, we accidentally ended up getting them twice. Use 'sort -u' to
avoid that.
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tildes as in path as in filenames are handled correctly now:
only files, containing tilde '~', are backups, thus are not valid.
[KJ]:
Definition of `space' was removed, scripts/Kbuild.include has one.
That definition was taken right from the GNU make manual, while Kbuild's
version is original.
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Bastian Blank <bastian@waldi.eu.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
`make help' in the build tree doesn't show the help texts about the
`headers_install' and `headers_check' targets because it looks for
include/asm-$(ARCH)/Kbuild in the wrong place.
Add the missing `$(srctree)' prefixes to fix this.
Also move the printing of the default install path for the headers inside the
`if/fi', where it belongs.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert previous attempts at messing with the linux banner string and
simply use a separate format string for proc.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
include/linux/utsrelease.h and include/linux/version.h aren't removed any
more by mrproper in kernel 2.6.20-rc2. The patch below fixes this.
The definition of MRPROPER_FILES looks weird: generated-headers looks like
a misspelling of generated_headers, but that one is a Makefile target, not
a variable or a file, so I don't see how including it in MRPROPER_FILES
could have any effect.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
compile.h is created super-late in the build. But proc_misc.c want to include
it, and it's generally not sane to have a header file in include/linux be
created at the end of the build: it's either not present or, worse, wrong for
most of the build.
So the patch arranges for compile.h to be built at the start of the build
process. It also consolidates the compile.h rules with those for version.h
and utsname.h, so they all get built together.
I hope. My chances of having got this right are about 2%.
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed. We can put it back when
it's stable and isn't likely to make warning or bug events worse.
In the meantime, enable frame pointers for more readable stack traces.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The previous checkstack fix for UML, which needs to use the host's tools,
was wrong in the crossbuilding case. It would use the build host's, rather
than the target's, toolchain.
This patch removes the old fix and adds an explicit special case for UML,
leaving everyone else alone.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
`make -d help | grep Makefile` shows patterns, where make tries to rebuild
included and top makefiles.
While `make -rR is now default' commit should fix this, actually, it was just
a little janitorial.
This fix is aimed to complete cancelling implicit rules.
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>