Pull x86 asm updates from Ingo Molnar:
"This is another big update. Main changes are:
- lots of x86 system call (and other traps/exceptions) entry code
enhancements. In particular the complex parts of the 64-bit entry
code have been migrated to C code as well, and a number of dusty
corners have been refreshed. (Andy Lutomirski)
- vDSO special mapping robustification and general cleanups (Andy
Lutomirski)
- cpufeature refactoring, cleanups and speedups (Borislav Petkov)
- lots of other changes ..."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/cpufeature: Enable new AVX-512 features
x86/entry/traps: Show unhandled signal for i386 in do_trap()
x86/entry: Call enter_from_user_mode() with IRQs off
x86/entry/32: Change INT80 to be an interrupt gate
x86/entry: Improve system call entry comments
x86/entry: Remove TIF_SINGLESTEP entry work
x86/entry/32: Add and check a stack canary for the SYSENTER stack
x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup
x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed
x86/entry: Vastly simplify SYSENTER TF (single-step) handling
x86/entry/traps: Clear DR6 early in do_debug() and improve the comment
x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions
x86/entry/32: Restore FLAGS on SYSEXIT
x86/entry/32: Filter NT and speed up AC filtering in SYSENTER
x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test
selftests/x86: In syscall_nt, test NT|TF as well
x86/asm-offsets: Remove PARAVIRT_enabled
x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled
uprobes: __create_xol_area() must nullify xol_mapping.fault
x86/cpufeature: Create a new synthetic cpu capability for machine check recovery
...
Pull perf updates from Ingo Molnar:
"Main kernel side changes:
- Big reorganization of the x86 perf support code. The old code grew
organically deep inside arch/x86/kernel/cpu/perf* and its naming
became somewhat messy.
The new location is under arch/x86/events/, using the following
cleaner hierarchy of source code files:
perf/x86: Move perf_event.c .................. => x86/events/core.c
perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c
perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c
perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch]
perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c
perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c
perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c
perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c
perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c
perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c
perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c
perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch]
perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c
perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch]
perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c
perf/x86: Move perf_event_intel_uncore_snb.c => x86/events/intel/uncore_snb.c
perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c
perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c
perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c
perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c
perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c
(Borislav Petkov)
- Update various x86 PMU constraint and hw support details (Stephane
Eranian)
- Optimize kprobes for BPF execution (Martin KaFai Lau)
- Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas
Gleixner)
- Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner)
- Various fixes and smaller cleanups.
There are lots of perf tooling updates as well. A few highlights:
perf report/top:
- Hierarchy histogram mode for 'perf top' and 'perf report',
showing multiple levels, one per --sort entry: (Namhyung Kim)
On a mostly idle system:
# perf top --hierarchy -s comm,dso
Then expand some levels and use 'P' to take a snapshot:
# cat perf.hist.0
- 92.32% perf
58.20% perf
22.29% libc-2.22.so
5.97% [kernel]
4.18% libelf-0.165.so
1.69% [unknown]
- 4.71% qemu-system-x86
3.10% [kernel]
1.60% qemu-system-x86_64 (deleted)
+ 2.97% swapper
#
- Add 'L' hotkey to dynamicly set the percent threshold for
histogram entries and callchains, i.e. dynamicly do what the
--percent-limit command line option to 'top' and 'report' does.
(Namhyung Kim)
perf mem:
- Allow specifying events via -e in 'perf mem record', also listing
what events can be specified via 'perf mem record -e list' (Jiri
Olsa)
perf record:
- Add 'perf record' --all-user/--all-kernel options, so that one
can tell that all the events in the command line should be
restricted to the user or kernel levels (Jiri Olsa), i.e.:
perf record -e cycles:u,instructions:u
is equivalent to:
perf record --all-user -e cycles,instructions
- Make 'perf record' collect CPU cache info in the perf.data file header:
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
$ perf report --header-only -I | tail -10 | head -8
# CPU cache info:
# L1 Data 32K [0-1]
# L1 Instruction 32K [0-1]
# L1 Data 32K [2-3]
# L1 Instruction 32K [2-3]
# L2 Unified 256K [0-1]
# L2 Unified 256K [2-3]
# L3 Unified 4096K [0-3]
Will be used in 'perf c2c' and eventually in 'perf diff' to
allow, for instance running the same workload in multiple
machines and then when using 'diff' show the hardware difference.
(Jiri Olsa)
- Improved support for Java, using the JVMTI agent library to do
jitdumps that then will be inserted in synthesized
PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized
ELF files stored in ~/.debug and keyed with build-ids, to allow
symbol resolution and even annotation with source line info, see
the changeset comments to see how to use it (Stephane Eranian)
perf script/trace:
- Decode data_src values (e.g. perf.data files generated by 'perf
mem record') in 'perf script': (Jiri Olsa)
# perf script
perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- Improve support to 'data_src', 'weight' and 'addr' fields in
'perf script' (Jiri Olsa)
- Handle empty print fmts in 'perf script -s' i.e. when running
python or perl scripts (Taeung Song)
perf stat:
- 'perf stat' now shows shadow metrics (insn per cycle, etc) in
interval mode too. E.g:
# perf stat -I 1000 -e instructions,cycles sleep 1
# time counts unit events
1.000215928 519,620 instructions # 0.69 insn per cycle
1.000215928 752,003 cycles
<SNIP>
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
- Implement CSV metrics output in 'perf stat' (Andi Kleen)
perf BPF support:
- Support converting data from bpf events in 'perf data' (Wang Nan)
- Print bpf-output events in 'perf script': (Wang Nan).
# perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000
# perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
#
- Add API to set values of map entries in a BPF object, be it
individual map slots or ranges (Wang Nan)
- Introduce support for the 'bpf-output' event (Wang Nan)
- Add glue to read perf events in a BPF program (Wang Nan)
- Improve support for bpf-output events in 'perf trace' (Wang Nan)
... and tons of other changes as well - see the shortlog and git log
for details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits)
perf stat: Add --metric-only support for -A
perf stat: Implement --metric-only mode
perf stat: Document CSV format in manpage
perf hists browser: Check sort keys before hot key actions
perf hists browser: Allow thread filtering for comm sort key
perf tools: Add sort__has_comm variable
perf tools: Recalc total periods using top-level entries in hierarchy
perf tools: Remove nr_sort_keys field
perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
perf tools: Remove hist_entry->fmt field
perf tools: Fix command line filters in hierarchy mode
perf tools: Add more sort entry check functions
perf tools: Fix hist_entry__filter() for hierarchy
perf jitdump: Build only on supported archs
tools lib traceevent: Add '~' operation within arg_num_eval()
perf tools: Omit unnecessary cast in perf_pmu__parse_scale
perf tools: Pass perf_hpp_list all the way through setup_sort_list
perf tools: Fix perf script python database export crash
perf jitdump: DWARF is also needed
perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
...
This patch updates all instances of csum_tcpudp_magic and
csum_tcpudp_nofold to reflect the types that are usually used as the source
inputs. For example the protocol field is populated based on nexthdr which
is actually an unsigned 8 bit value. The length is usually populated based
on skb->len which is an unsigned integer.
This addresses an issue in which the IPv6 function csum_ipv6_magic was
generating a checksum using the full 32b of skb->len while
csum_tcpudp_magic was only using the lower 16 bits. As a result we could
run into issues when attempting to adjust the checksum as there was no
protocol agnostic way to update it.
With this change the value is still truncated as many architectures use
"(len + proto) << 8", however this truncation only occurs for values
greater than 16776960 in length and as such is unlikely to occur as we stop
the inner headers at ~64K in size.
I did have to make a few minor changes in the arm, mn10300, nios2, and
score versions of the function in order to support these changes as they
were either using things such as an OR to combine the protocol and length,
or were using ntohs to convert the length which would have truncated the
value.
I also updated a few spots in terms of whitespace and type differences for
the addresses. Most of this was just to make sure all of the definitions
were in sync going forward.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Given we have uninitialized list_heads being passed to list_add() it
will always be the case that those uninitialized values randomly trigger
the poison value. Especially since a list_add() operation will seed the
stack with the poison value for later stack allocations to trip over.
For example, see these two false positive reports:
list_add attempted on force-poisoned entry
WARNING: at lib/list_debug.c:34
[..]
NIP [c00000000043c390] __list_add+0xb0/0x150
LR [c00000000043c38c] __list_add+0xac/0x150
Call Trace:
__list_add+0xac/0x150 (unreliable)
__down+0x4c/0xf8
down+0x68/0x70
xfs_buf_lock+0x4c/0x150 [xfs]
list_add attempted on force-poisoned entry(0000000000000500),
new->next == d0000000059ecdb0, new->prev == 0000000000000500
WARNING: at lib/list_debug.c:33
[..]
NIP [c00000000042db78] __list_add+0xa8/0x140
LR [c00000000042db74] __list_add+0xa4/0x140
Call Trace:
__list_add+0xa4/0x140 (unreliable)
rwsem_down_read_failed+0x6c/0x1a0
down_read+0x58/0x60
xfs_log_commit_cil+0x7c/0x600 [xfs]
Fixes: commit 5c2c2587b1 ("mm, dax, pmem: introduce {get|put}_dev_pagemap() for dax-gup")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Tested-by: Eryu Guan <eguan@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are going to require dma_ops for several common drivers, even for
systems that do have an identity mapping. Lets provide some minimal
no-op dma_ops that can be used for that purpose.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want the fixes in here, and others are sending us pull requests based
on this kernel tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make it possible to write a target state to the per cpu state file, so we can
switch between states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.022814799@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Can be used to randomly match packets e.g. for statistic traffic sampling.
See commit 3ad0040573
("bpf: split state from prandom_u32() and consolidate {c, e}BPF prngs")
for more info why this doesn't use prandom_u32 directly.
Unlike bpf nft_meta can be built as a module, so add an EXPORT_SYMBOL
for prandom_seed_full_state too.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Almost every cpumask function is exported, just not the one I need to make the
Intel uncore driver modular.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221011.878299859@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a CONFIG_STACK_VALIDATION option which will run "objtool check" for
each .o file to ensure the validity of its stack metadata.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/92baab69a6bf9bc7043af0bfca9fb964a1d45546.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we use CONFIG_PROFILE_ALL_BRANCHES, every 'if()' introduces
a static variable, but that is not allowed in 'extern inline'
functions:
mpi-inline.h:116:204: warning: '______f' is static but declared in inline function 'mpihelp_sub' which is not static
mpi-inline.h:113:184: warning: '______f' is static but declared in inline function 'mpihelp_sub' which is not static
mpi-inline.h:70:184: warning: '______f' is static but declared in inline function 'mpihelp_add' which is not static
mpi-inline.h:56:204: warning: '______f' is static but declared in inline function 'mpihelp_add_1' which is not static
This changes the MPI code to use 'static inline' instead, to get
rid of hundreds of warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A wrapper around the umull assembly instruction might reuse
the input register as an output, which is undefined on
some ARM machines, as pointed out by this assembler warning:
CC lib/mpi/generic_mpih-mul1.o
/tmp/ccxJuxIy.s: Assembler messages:
/tmp/ccxJuxIy.s:53: rdhi, rdlo and rm must all be different
CC lib/mpi/generic_mpih-mul2.o
/tmp/ccI0scAD.s: Assembler messages:
/tmp/ccI0scAD.s:53: rdhi, rdlo and rm must all be different
CC lib/mpi/generic_mpih-mul3.o
/tmp/ccMvVQcp.s: Assembler messages:
/tmp/ccMvVQcp.s:53: rdhi, rdlo and rm must all be different
This changes the constraints to force different registers to
be used as output.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The limbs are integers in the host endianness, so we can't simply
iterate over the individual bytes. The current code happens to work on
little-endian, because the order of the limbs in the MPI array is the
same as the order of the bytes in each limb, but it breaks on
big-endian.
Fixes: 0f74fbf77d ("MPI: Fix mpi_read_buffer")
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds support to the generic search_extable() and sort_extable()
implementations for dealing with exception table entries whose fields
contain relative offsets rather than absolute addresses.
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Conflicts:
drivers/net/phy/bcm7xxx.c
drivers/net/phy/marvell.c
drivers/net/vxlan.c
All three conflicts were cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This is mainly testing bitmap construction and conversion to/from u32[]
for now.
Tested:
qemu i386, x86_64, ppc, ppc64 BE and LE, ARM.
Signed-off-by: David Decotigny <decot@googlers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aimed at transferring bitmaps to/from user-space in a 32/64-bit agnostic
way.
Tested:
unit tests (next patch) on qemu i386, x86_64, ppc, ppc64 BE and LE,
ARM.
Signed-off-by: David Decotigny <decot@googlers.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparisons should be >= since 0x800 and 0x80 require an additional bit
to store.
For the 3 byte case, the existing shift would drop off 2 more bits than
intended.
For the 2 byte case, there should be 5 bits bits in byte 1, and 6 bits in
byte 2.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Matthew Garrett <mjg59@coreos.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
may brick machines. We use a whitelist of known-safe variables to
allow things like installing distributions to work out of the box, and
instead restrict vendor-specific variable deletion by making
non-whitelist variables immutable - Peter Jones
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=F4YT
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
* Prevent accidental deletion of EFI variables through efivarfs that
may brick machines. We use a whitelist of known-safe variables to
allow things like installing distributions to work out of the box, and
instead restrict vendor-specific variable deletion by making
non-whitelist variables immutable (Peter Jones)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All are in comments.
Signed-off-by: Bogdan Sikora <bsikora@redhat.com>
Cc: <linux-mm@kvack.org>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jan Kara <jack@suse.cz>
[jkosina@suse.cz: more fixup]
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fix spelling typos found in printk and Kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Here is one driver core, well klist, fix for 4.5-rc4. It fixes a
problem found in the scsi device list traversal that probably also could
be triggered by other subsystems.
The fix has been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbAzd8ACgkQMUfUDdst+ymrBQCeKF7+mPHBApEJsedFJhGNNwSb
PnIAoKMa1hCZ4MR86tfdXCylh2Gw/xPt
=OlH/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is one driver core, well klist, fix for 4.5-rc4.
It fixes a problem found in the scsi device list traversal that
probably also could be triggered by other subsystems.
The fix has been in linux-next for a while with no reported problems"
* tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
klist: fix starting point removed bug in klist iterators
The kptr_restrict flag, when set to 1, only prints the kernel address
when the user has CAP_SYSLOG. When it is set to 2, the kernel address
is always printed as zero. When set to 1, this needs to check whether
or not we're in IRQ.
However, when set to 2, this check is unneccessary, and produces
confusing results in dmesg. Thus, only make sure we're not in IRQ when
mode 1 is used, but not mode 2.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When enabling UBSAN_SANITIZE_ALL, the kernel image size gets increased
significantly (~3x). So, it sounds better to have some note in Kconfig.
And, fixed a typo.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull workqueue fixes from Tejun Heo:
"Workqueue fixes for v4.5-rc3.
- Remove a spurious triggering of flush dependency warning.
- Officially break local execution guarantee of unbound work items
and add a debug feature to flush out usages which depend on it.
- Work around CPU -> NODE mapping becoming invalid on CPU offline.
The branch is young but pushing out early as stable kernels are being
affected"
* 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup
workqueue: implement "workqueue.debug_force_rr_cpu" debug feature
workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs
Revert "workqueue: make sure delayed work run in local cpu"
workqueue: skip flush dependency checks for legacy workqueues
This adds ucs2_utf8size(), which tells us how big our ucs2 string is in
bytes, and ucs2_as_utf8, which translates from ucs2 to utf8..
Signed-off-by: Peter Jones <pjones@redhat.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Workqueue used to guarantee local execution for work items queued
without explicit target CPU. The guarantee is gone now which can
break some usages in subtle ways. To flush out those cases, this
patch implements a debug feature which forces round-robin CPU
selection for all such work items.
The debug feature defaults to off and can be enabled with a kernel
parameter. The default can be flipped with a debug config option.
If you hit this commit during bisection, please refer to 041bd12e27
("Revert "workqueue: make sure delayed work run in local cpu"") for
more information and ping me.
Signed-off-by: Tejun Heo <tj@kernel.org>
clang does not support nested functions inside of an array definition:
lib/test_static_keys.c:105:16: error: function definition is not allowed here
.test_key = test_key_func(&old_true_key, static_key_true),
lib/test_static_keys.c:50:20: note: expanded from macro 'test_key_func'
({bool func(void) { return branch(key); } func; })
That code appears to be a little too clever, so this simplifies it
a bit by defining functions outside of the array.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1454942223-2781480-1-git-send-email-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix the doubled "started" and tidy up the following sentences.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The starting node for a klist iteration is often passed in from
somewhere way above the klist infrastructure, meaning there's no
guarantee the node is still on the list. We've seen this in SCSI where
we use bus_find_device() to iterate through a list of devices. In the
face of heavy hotplug activity, the last device returned by
bus_find_device() can be removed before the next call. This leads to
Dec 3 13:22:02 localhost kernel: WARNING: CPU: 2 PID: 28073 at include/linux/kref.h:47 klist_iter_init_node+0x3d/0x50()
Dec 3 13:22:02 localhost kernel: Modules linked in: scsi_debug x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel joydev iTCO_wdt dcdbas ipmi_devintf acpi_power_meter iTCO_vendor_support ipmi_si imsghandler pcspkr wmi acpi_cpufreq tpm_tis tpm shpchp lpc_ich mfd_core nfsd nfs_acl lockd grace sunrpc tg3 ptp pps_core
Dec 3 13:22:02 localhost kernel: CPU: 2 PID: 28073 Comm: cat Not tainted 4.4.0-rc1+ #2
Dec 3 13:22:02 localhost kernel: Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013
Dec 3 13:22:02 localhost kernel: ffffffff81a20e77 ffff880613acfd18 ffffffff81321eef 0000000000000000
Dec 3 13:22:02 localhost kernel: ffff880613acfd50 ffffffff8107ca52 ffff88061176b198 0000000000000000
Dec 3 13:22:02 localhost kernel: ffffffff814542b0 ffff880610cfb100 ffff88061176b198 ffff880613acfd60
Dec 3 13:22:02 localhost kernel: Call Trace:
Dec 3 13:22:02 localhost kernel: [<ffffffff81321eef>] dump_stack+0x44/0x55
Dec 3 13:22:02 localhost kernel: [<ffffffff8107ca52>] warn_slowpath_common+0x82/0xc0
Dec 3 13:22:02 localhost kernel: [<ffffffff814542b0>] ? proc_scsi_show+0x20/0x20
Dec 3 13:22:02 localhost kernel: [<ffffffff8107cb4a>] warn_slowpath_null+0x1a/0x20
Dec 3 13:22:02 localhost kernel: [<ffffffff8167225d>] klist_iter_init_node+0x3d/0x50
Dec 3 13:22:02 localhost kernel: [<ffffffff81421d41>] bus_find_device+0x51/0xb0
Dec 3 13:22:02 localhost kernel: [<ffffffff814545ad>] scsi_seq_next+0x2d/0x40
[...]
And an eventual crash. It can actually occur in any hotplug system
which has a device finder and a starting device.
We can fix this globally by making sure the starting node for
klist_iter_init_node() is actually a member of the list before using it
(and by starting from the beginning if it isn't).
Reported-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some servers experienced fatal deadlocks because of a combination of
bugs, leading to multiple cpus calling dump_stack().
The checksumming bug was fixed in commit 34ae6a1aa0 ("ipv6: update
skb->csum when CE mark is propagated").
The second problem is a faulty locking in dump_stack()
CPU1 runs in process context and calls dump_stack(), grabs dump_lock.
CPU2 receives a TCP packet under softirq, grabs socket spinlock, and
call dump_stack() from netdev_rx_csum_fault().
dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since
dump_lock is owned by CPU1
While dumping its stack, CPU1 is interrupted by a softirq, and happens
to process a packet for the TCP socket locked by CPU2.
CPU1 spins forever in spin_lock() : deadlock
Stack trace on CPU1 looked like :
NMI backtrace for cpu 1
RIP: _raw_spin_lock+0x25/0x30
...
Call Trace:
<IRQ>
tcp_v6_rcv+0x243/0x620
ip6_input_finish+0x11f/0x330
ip6_input+0x38/0x40
ip6_rcv_finish+0x3c/0x90
ipv6_rcv+0x2a9/0x500
process_backlog+0x461/0xaa0
net_rx_action+0x147/0x430
__do_softirq+0x167/0x2d0
call_softirq+0x1c/0x30
do_softirq+0x3f/0x80
irq_exit+0x6e/0xc0
smp_call_function_single_interrupt+0x35/0x40
call_function_single_interrupt+0x6a/0x70
<EOI>
printk+0x4d/0x4f
printk_address+0x31/0x33
print_trace_address+0x33/0x3c
print_context_stack+0x7f/0x119
dump_trace+0x26b/0x28e
show_trace_log_lvl+0x4f/0x5c
show_stack_log_lvl+0x104/0x113
show_stack+0x42/0x44
dump_stack+0x46/0x58
netdev_rx_csum_fault+0x38/0x3c
__skb_checksum_complete_head+0x6e/0x80
__skb_checksum_complete+0x11/0x20
tcp_rcv_established+0x2bd5/0x2fd0
tcp_v6_do_rcv+0x13c/0x620
sk_backlog_rcv+0x15/0x30
release_sock+0xd2/0x150
tcp_recvmsg+0x1c1/0xfc0
inet_recvmsg+0x7d/0x90
sock_recvmsg+0xaf/0xe0
___sys_recvmsg+0x111/0x3b0
SyS_recvmsg+0x5c/0xb0
system_call_fastpath+0x16/0x1b
Fixes: b58d977432 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup. Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.
This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0. The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.
Fixes: cebbd29e1c ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently added commit 564b026fbd ("string_helpers: fix precision loss
for some inputs") fixed precision issues for string_get_size() and broke
tests.
Fix and improve them: test both STRING_UNITS_2 and STRING_UNITS_10 at a
time, better failure reporting, test small an huge values.
Fixes: 564b026fbd ("string_helpers: fix precision loss for some inputs")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move them to a separate header and have the following
dependency:
x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h
This makes it easier to use the header in asm code and not
include the whole cpufeature.h and add guards for asm.
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1453842730-28463-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On my bigger s390 systems I always get "Out of memory.
ODEBUG disabled". Since the number of objects is needed at
compile time, we can not change the size dynamically before
the caches etc are available. Doubling the size seems to
do the trick. Since it is init data it will be freed anyway,
this should be ok.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: http://lkml.kernel.org/r/1453905478-13409-1-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed through the
RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to dependencies,
acknowledged by Bruce)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5oO7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Initial roundup of 4.5 merge window patches
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed
through the RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to
dependencies, acknowledged by Bruce)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
IB/mlx5: Unify CQ create flags check
IB/mlx5: Expose Raw Packet QP to user space consumers
{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
IB/mlx5: Add Raw Packet QP query functionality
IB/mlx5: Add create and destroy functionality for Raw Packet QP
IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
IB/mlx5: Allocate a Transport Domain for each ucontext
net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
net/mlx5_core: Add RQ and SQ event handling
net/mlx5_core: Export transport objects
IB/mlx5: Expose CQE version to user-space
IB/mlx5: Add CQE version 1 support to user QPs and SRQs
IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
IB/sa: Fix netlink local service GFP crash
IB/srpt: Remove redundant wc array
IB/qib: Improve ipoib UD performance
IB/mlx4: Advertise RoCE v2 support
IB/mlx4: Create and use another QP1 for RoCEv2
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
...
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
API:
- A large number of bug fixes for the af_alg interface, credit goes
to Dmitry Vyukov for discovering and reporting these issues.
Algorithms:
- sw842 needs to select crc32.
- The soft dependency on crc32c is now in the correct spot.
Drivers:
- The atmel AES driver needs HAS_DMA.
- The atmel AES driver was a missing break statement, fortunately
it's only a debug function.
- A number of bug fixes for the Intel qat driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (24 commits)
crypto: algif_skcipher - sendmsg SG marking is off by one
crypto: crc32c - Fix crc32c soft dependency
crypto: algif_skcipher - Load TX SG list after waiting
crypto: atmel-aes - Add missing break to atmel_aes_reg_name
crypto: algif_skcipher - Fix race condition in skcipher_check_key
crypto: algif_hash - Fix race condition in hash_check_key
crypto: CRYPTO_DEV_ATMEL_AES should depend on HAS_DMA
lib: sw842: select crc32
crypto: af_alg - Forbid bind(2) when nokey child sockets are present
crypto: algif_skcipher - Remove custom release parent function
crypto: algif_hash - Remove custom release parent function
crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
crypto: qat - update init_esram for C3xxx dev type
crypto: qat - fix timeout issues
crypto: qat - remove to call get_sram_bar_id for qat_c3xxx
crypto: algif_skcipher - Add key check exception for cipher_null
crypto: skcipher - Add crypto_skcipher_has_setkey
crypto: algif_hash - Require setkey before accept(2)
crypto: hash - Add crypto_ahash_has_setkey
crypto: algif_skcipher - Add nokey compatibility path
...
Merge misc fixes from Andrew Morton:
"Six fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lock
reiserfs: fix dereference of ERR_PTR
ratelimit: fix bug in time interval by resetting right begin time
mm: fix kernel crash in khugepaged thread
mm: fix mlock accouting
thp: change pmd_trans_huge_lock() interface to return ptl
Pull block driver updates from Jens Axboe:
"This is the block driver pull request for 4.5, with the exception of
NVMe, which is in a separate branch and will be posted after this one.
This pull request contains:
- A set of bcache stability fixes, which have been acked by Kent.
These have been used and tested for more than a year by the
community, so it's about time that they got in.
- A set of drbd updates from the drbd team (Andreas, Lars, Philipp)
and Markus Elfring, Oleg Drokin.
- A set of fixes for xen blkback/front from the usual suspects, (Bob,
Konrad) as well as community based fixes from Kiri, Julien, and
Peng.
- A 2038 time fix for sx8 from Shraddha, with a fix from me.
- A small mtip32xx cleanup from Zhu Yanjun.
- A null_blk division fix from Arnd"
* 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits)
null_blk: use sector_div instead of do_div
mtip32xx: restrict variables visible in current code module
xen/blkfront: Fix crash if backend doesn't follow the right states.
xen/blkback: Fix two memory leaks.
xen/blkback: make st_ statistics per ring
xen/blkfront: Handle non-indirect grant with 64KB pages
xen-blkfront: Introduce blkif_ring_get_request
xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule()
xen/blkback: Free resources if connect_ring failed.
xen/blocks: Return -EXX instead of -1
xen/blkback: make pool of persistent grants and free pages per-queue
xen/blkback: get the number of hardware queues/rings from blkfront
xen/blkback: pseudo support for multi hardware queues/rings
xen/blkback: separate ring information out of struct xen_blkif
xen/blkfront: correct setting for xen_blkif_max_ring_order
xen/blkfront: make persistent grants pool per-queue
xen/blkfront: Remove duplicate setting of ->xbdev.
xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors.
xen/blkfront: negotiate number of queues/rings to be used with backend
xen/blkfront: split per device io_lock
...
rs->begin in ratelimit is set in two cases.
1) when rs->begin was not initialized
2) when rs->interval was passed
For case #2, current ratelimit sets the begin to 0. This incurrs
improper suppression. The begin value will be set in the next ratelimit
call by 1). Then the time interval check will be always false, and
rs->printed will not be initialized. Although enough time passed,
ratelimit may return 0 if rs->printed is not less than rs->burst. To
reset interval properly, begin should be jiffies rather than 0.
For an example code below:
static DEFINE_RATELIMIT_STATE(mylimit, 1, 1);
for (i = 1; i <= 10; i++) {
if (__ratelimit(&mylimit))
printk("ratelimit test count %d\n", i);
msleep(3000);
}
test result in the current code shows suppression even there is 3 seconds sleep.
[ 78.391148] ratelimit test count 1
[ 81.295988] ratelimit test count 2
[ 87.315981] ratelimit test count 4
[ 93.336267] ratelimit test count 6
[ 99.356031] ratelimit test count 8
[ 105.376367] ratelimit test count 10
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Expose an interface to allow users to mark several accesses together as
being user space accesses, allowing batching of the surrounding user
space access markers (SMAP on x86, PAN on arm64, domain register
switching on arm).
This is currently only used for the user string lenth and copying
functions, where the SMAP overhead on x86 drowned the actual user
accesses (only noticeable on newer microarchitectures that support SMAP
in the first place, of course).
* user access batching branch:
Use the new batched user accesses in generic user string handling
Add 'unsafe' user access functions for batched accesses
x86: reorganize SMAP handling in user space accesses
Merge third patch-bomb from Andrew Morton:
"I'm pretty much done for -rc1 now:
- the rest of MM, basically
- lib/ updates
- checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit
- cpu_mask simplifications
- kexec, rapidio, MAINTAINERS etc, etc.
- more dma-mapping cleanups/simplifications from hch"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
MAINTAINERS: add/fix git URLs for various subsystems
mm: memcontrol: add "sock" to cgroup2 memory.stat
mm: memcontrol: basic memory statistics in cgroup2 memory controller
mm: memcontrol: do not uncharge old page in page cache replacement
Documentation: cgroup: add memory.swap.{current,max} description
mm: free swap cache aggressively if memcg swap is full
mm: vmscan: do not scan anon pages if memcg swap limit is hit
swap.h: move memcg related stuff to the end of the file
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mm: vmscan: pass memcg to get_scan_count()
mm: memcontrol: charge swap to cgroup2
mm: memcontrol: clean up alloc, online, offline, free functions
mm: memcontrol: flatten struct cg_proto
mm: memcontrol: rein in the CONFIG space madness
net: drop tcp_memcontrol.c
mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
mm: memcontrol: allow to disable kmem accounting for cgroup2
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
mm: memcontrol: separate kmem code from legacy tcp accounting code
...
The asm-generic tree this time contains one series from Nicolas Pitre
that makes the optimized do_div() implementation from the ARM
architecture available to all architectures. This also adds stricter
type checking for callers of do_div, which has uncovered a number
of bugs in existing code, and fixes up the ones we have found.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4psa
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree this time contains one series from Nicolas Pitre
that makes the optimized do_div() implementation from the ARM
architecture available to all architectures.
This also adds stricter type checking for callers of do_div, which has
uncovered a number of bugs in existing code, and fixes up the ones we
have found"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
ARM: asm/div64.h: adjust to generic codde
__div64_32(): make it overridable at compile time
__div64_const32(): abstract out the actual 128-bit cross product code
do_div(): generic optimization for constant divisor on 32-bit machines
div64.h: optimize do_div() for power-of-two constant divisors
mtd/sm_ftl.c: fix wrong do_div() usage
drm/mgag200/mgag200_mode.c: fix wrong do_div() usage
hid-sensor-hub.c: fix wrong do_div() usage
ti/fapll: fix wrong do_div() usage
ti/clkt_dpll: fix wrong do_div() usage
tegra/clk-divider: fix wrong do_div() usage
imx/clk-pllv2: fix wrong do_div() usage
imx/clk-pllv1: fix wrong do_div() usage
nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage
Larry Finger reports:
"My PowerBook G4 Aluminum with a 32-bit PPC processor fails to boot for
the 4.4-git series".
This is likely due to X still needing /dev/mem access on this platform.
CONFIG_IO_STRICT_DEVMEM is not yet safe to turn on when
CONFIG_STRICT_DEVMEM=y.
Remove the default so that old configurations do not change behavior.
Fixes: 90a545e981 ("restrict /dev/mem to idle io memory ranges")
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: http://marc.info/?l=linux-kernel&m=145332012023825&w=2
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
UBSAN uses compile-time instrumentation to catch undefined behavior
(UB). Compiler inserts code that perform certain kinds of checks before
operations that could cause UB. If check fails (i.e. UB detected)
__ubsan_handle_* function called to print error message.
So the most of the work is done by compiler. This patch just implements
ubsan handlers printing errors.
GCC has this capability since 4.9.x [1] (see -fsanitize=undefined
option and its suboptions).
However GCC 5.x has more checkers implemented [2].
Article [3] has a bit more details about UBSAN in the GCC.
[1] - https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
[2] - https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
[3] - http://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/
Issues which UBSAN has found thus far are:
Found bugs:
* out-of-bounds access - 97840cb67f ("netfilter: nfnetlink: fix
insufficient validation in nfnetlink_bind")
undefined shifts:
* d48458d4a7 ("jbd2: use a better hash function for the revoke
table")
* 10632008b9 ("clockevents: Prevent shift out of bounds")
* 'x << -1' shift in ext4 -
http://lkml.kernel.org/r/<5444EF21.8020501@samsung.com>
* undefined rol32(0) -
http://lkml.kernel.org/r/<1449198241-20654-1-git-send-email-sasha.levin@oracle.com>
* undefined dirty_ratelimit calculation -
http://lkml.kernel.org/r/<566594E2.3050306@odin.com>
* undefined roundown_pow_of_two(0) -
http://lkml.kernel.org/r/<1449156616-11474-1-git-send-email-sasha.levin@oracle.com>
* [WONTFIX] undefined shift in __bpf_prog_run -
http://lkml.kernel.org/r/<CACT4Y+ZxoR3UjLgcNdUm4fECLMx2VdtfrENMtRRCdgHB2n0bJA@mail.gmail.com>
WONTFIX here because it should be fixed in bpf program, not in kernel.
signed overflows:
* 32a8df4e0b ("sched: Fix odd values in effective_load()
calculations")
* mul overflow in ntp -
http://lkml.kernel.org/r/<1449175608-1146-1-git-send-email-sasha.levin@oracle.com>
* incorrect conversion into rtc_time in rtc_time64_to_tm() -
http://lkml.kernel.org/r/<1449187944-11730-1-git-send-email-sasha.levin@oracle.com>
* unvalidated timespec in io_getevents() -
http://lkml.kernel.org/r/<CACT4Y+bBxVYLQ6LtOKrKtnLthqLHcw-BMp3aqP3mjdAvr9FULQ@mail.gmail.com>
* [NOTABUG] signed overflow in ktime_add_safe() -
http://lkml.kernel.org/r/<CACT4Y+aJ4muRnWxsUe1CMnA6P8nooO33kwG-c8YZg=0Xc8rJqw@mail.gmail.com>
[akpm@linux-foundation.org: fix unused local warning]
[akpm@linux-foundation.org: fix __int128 build woes]
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yury Gribov <y.gribov@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The clz table (__clz_tab) in lib/clz_tab.c is also provided as part of
libgcc.a, and many architectures link against libgcc. To allow the
linker to avoid a multiple-definition link failure, clz_tab.o has to be
in lib/lib.a rather than lib/builtin.o. The specific issue is that
libgcc.a comes before lib/builtin.o on vmlinux.o's link command line, so
its _clz.o is pulled to satisfy __clz_tab, and then when the remainder
of lib/builtin.o is pulled in to satisfy all the other dependencies, the
__clz_tab symbols conflict. By putting clz_tab.o in lib.a, the linker
can simply avoid pulling it into vmlinux.o when this situation arises.
The definitions of __clz_tab are the same in libgcc.a and in the kernel;
arguably we could also simply rename the kernel version, but it's
unlikely the libgcc version will ever change to become incompatible, so
just using it seems reasonably safe.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Like others test are doing print the gathered statistics after test module
is finished. Return from the module based on the result.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the only one combination is tested for overflow, i.e. rowsize =
16, groupsize = 1, len = 1. Do various test to go through all possible
branches.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After processing by hex_dump_to_buffer() check all the parts to be expected.
Part 1. The actual expected hex dump with or without ASCII part.
Part 2. Check if the buffer is dirty beyond needed.
Part 3. Return code should be as expected.
This is done by using comparison of the return code and memcmp() against
the test buffer. We fill the buffer by FILL_CHAR ('#') characters, so, we
expect to have a tail of the buffer will be left untouched. The
terminating NUL is also checked by memcmp().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Better to use memcmp() against entire buffer to check that nothing is
happened to the data in the tail.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The magic numbers of the length are converted to their actual meaning,
such as end of the buffer with and without ASCII part.
We don't touch the rest of the magic constants that will be removed in the
following commits.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When test for overflow do iterate the buffer length in a range 0 ..
BUF_SIZE.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Define a character to fill the test buffers. Though the character should
be printable since it's used when errors are reported. It should neither
be from hex digit [a-fA-F0-9] dictionary nor space. It is recommended not
to use one which is present in ASCII part of the test data. Later on we
might switch to unprintable character to make test case more robust.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function prepares the expected result in the provided buffer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The test suite currently doesn't cover many corner cases when
hex_dump_to_buffer() runs into overflow. Refactor and amend test suite
to cover most of the cases.
This patch (of 9):
Just to follow the scheme that most of the test modules are using.
There is no fuctional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some drivers need to read data out of iomem areas 32-bits at a time.
Add an API to do this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: <zajec5@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was noticed that we lose precision in the final calculation for some
inputs. The most egregious example is size=3000 blk_size=1900 in units
of 10 should yield 5.70 MB but in fact yields 3.00 MB (oops).
This is because the current algorithm doesn't correctly account for
all the remainders in the logarithms. Fix this by doing a correct
calculation in the remainders based on napier's algorithm.
Additionally, now we have the correct result, we have to account for
arithmetic rounding because we're printing 3 digits of precision. This
means that if the fourth digit is five or greater, we have to round up,
so add a section to ensure correct rounding. Finally account for all
possible inputs correctly, including zero for block size.
Fixes: b9f28d8635
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: <stable@vger.kernel.org> [delay until after 4.4 release]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following build warning:
lib/libcrc32c.c:42:5: warning: no previous prototype for "crc32c" [-Wmissing-prototypes]
u32 crc32c(u32 crc, const void *address, unsigned int length)
^
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IRQ_POLL_F_SCHED bit is set as long as polling is ongoing.
This means that irq_poll_sched() must proceed if this bit has
not yet been set.
Fixes: commit ea51190c03 ("irq_poll: fold irq_poll_sched_prep into irq_poll_sched").
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
I don't think it makes sense for a module to have a soft dependency
on itself. This seems quite cyclic by nature and I can't see what
purpose it could serve.
OTOH libcrc32c calls crypto_alloc_shash("crc32c", 0, 0) so it pretty
much assumes that some incarnation of the "crc32c" hash algorithm has
been loaded. Therefore it makes sense to have the soft dependency
there (as crc-t10dif does.)
Cc: stable@vger.kernel.org
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sw842 library code was merged in linux-4.1 and causes a very rare randconfig
failure when CONFIG_CRC32 is not set:
lib/built-in.o: In function `sw842_compress':
oid_registry.c:(.text+0x12ddc): undefined reference to `crc32_be'
lib/built-in.o: In function `sw842_decompress':
oid_registry.c:(.text+0x137e4): undefined reference to `crc32_be'
This adds an explict 'select CRC32' statement, similar to what the other users
of the crc32 code have. In practice, CRC32 is always enabled anyway because
over 100 other symbols select it.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 2da572c959 ("lib: add software 842 compression/decompression")
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This 14 patch update:
- adds a new test for intel_pstate driver
- adds empty string and async test cases to
firmware class tests
- fixes and cleans up several existing tests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Vt32
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This 14 patch update:
- adds a new test for intel_pstate driver
- adds empty string and async test cases to firmware class tests
- fixes and cleans up several existing tests"
* tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: firmware: add empty string and async tests
firmware: actually return NULL on failed request_firmware_nowait()
test: firmware_class: add asynchronous request trigger
test: firmware_class: use kstrndup() where appropriate
test: firmware_class: report errors properly on failure
selftests/seccomp: fix 32-bit build warnings
add breakpoints/.gitignore
add ptrace/.gitignore
update .gitignore in selftests/timers
update .gitignore in selftests/vm
tools, testing, add test for intel_pstate driver
selftest/ipc: actually test it
selftests/capabilities: actually test it
selftests/capabilities: clean up for Makefile
Move switch case to the netdev_features_string() and rename it to
netdev_bits(). In the future we can extend it as needed.
Here we replace the fallback of %pN from '%p' with possible flags to
sticter '0x%p' without any flags variation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
special_hex_number() is a helper to print a fixed size type in a hex
format with '0x' prefix, zero padding, and small letters. In the module
we have already several copies of such code. Consolidate them under
special_hex_number() helper.
There are couple of differences though.
It seems nobody cared about the output in case of CONFIG_KALLSYMS=n,
when printing symbol address, because the asked field width is not
enough to care last 2 characters in the string represantation of the
pointer. Fixed here.
The %pNF specifier used to be allowed with a specific field width,
though there is neither any user of it nor mention the possibility in
the documentation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Following "lib/vsprintf.c: expand field_width to 24 bits", let's add a
test to see that we now actually support bitmaps with 65536 bits.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a few tests to test_number, one of which serves to document
another deviation from POSIX/C99 (printing 0 with an explicit precision
of 0).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel's printf doesn't follow the standards in a few corner cases
(which are probably mostly irrelevant). Add tests that document the
current behaviour.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a few padding bytes on either side of the test buffer, and check
that these (and the part of the buffer not used) are untouched by
vsnprintf.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
BUG is a completely unnecessarily big hammer, and we're more likely to
get the internal bug reported if we just pr_err() and ensure the test
suite fails.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kasprintf relies on being able to replay the formatting and getting the
same result (in particular, the same length). This will almost always
work, but it is possible that the object pointed to by a %s or %p
argument changed under us (so we might get truncated output). Add a
somewhat paranoid sanity check and let's see if it ever triggers.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The field width is overloaded to pass some extra information for some %p
extensions (e.g. #bits for %pb). But we might silently truncate the
passed value when we stash it in struct printf_spec (see e.g.
"lib/vsprintf.c: expand field_width to 24 bits"). Hopefully 23 value
bits should now be enough for everybody, but if not, let's make some
noise.
Do the same for the precision. In both cases, clamping seems more
sensible than truncating. While, according to POSIX, "A negative
precision is taken as if the precision were omitted.", the kernel's
printf has always treated that case as if the precision was 0, so we use
that as lower bound. For the field width, the smallest representable
value is actually -(1<<23), but a negative field width means 'set the
LEFT flag and use the absolute value', so we want the absolute value to
fit.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One consequence of the reorganization of struct printf_spec to make
field_width 24 bits was that number() gained about 180 bytes. Since
spec is never passed to other functions, we can help gcc make number()
lose most of that extra weight by using local variables for the field
width and precision.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maurizio Lombardi reported a problem [1] with the %pb extension: It
doesn't work for sufficiently large bitmaps, since the size is stashed
in the field_width field of the struct printf_spec, which is currently
an s16. Concretely, this manifested itself in
/sys/bus/pseudo/drivers/scsi_debug/map being empty, since the bitmap
printer got a size of 0, which is the 16 bit truncation of the actual
bitmap size.
We do want to keep struct printf_spec at 8 bytes so that it can cheaply
be passed by value. The qualifier field is only used for internal
bookkeeping in format_decode, so we might as well use a local variable
for that. This gives us an additional 8 bits, which we can then use for
the field width.
To stay in 8 bytes, we need to do a little rearranging and make the type
member a bitfield as well. For consistency, change all the members to
bit fields. gcc doesn't generate much worse code with these changes (in
fact, bloat-o-meter says we save 300 bytes - which I think is a little
surprising).
I didn't find a BUILD_BUG/compiletime_assertion/... which would work
outside function context, so for now I just open-coded it.
[1] http://thread.gmane.org/gmane.linux.kernel/2034835
[akpm@linux-foundation.org: avoid open-coded BUILD_BUG_ON]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the string corresponding to a %s specifier can change under us, we
might end up copying a \0 byte to the output buffer. There might be
callers who expect the output buffer to contain a genuine C string whose
length is exactly the snprintf return value (assuming truncation hasn't
happened or has been checked for).
We can avoid this by only passing over the source string once, stopping
the first time we meet a nul byte (or when we reach the given
precision), and then letting widen_string() handle left/right space
padding. As a small bonus, this code reuse also makes the generated
code slightly smaller.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is pure code movement, making sure the widen_string() helper is
defined before the string() function.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull out the logic in dentry_name() which handles field width space
padding, in preparation for reusing it from string(). Rename the
widen() helper to move_right(), since it is used for handling the
!(flags & LEFT) case.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As illustrated by commit a3afe70b83 ("[S390] latencytop s390
support."), HAVE_LATENCYTOP_SUPPORT is defined by an architecture to
advertise an implementation of save_stack_trace_tsk.
However, as of 9212ddb5ea ("stacktrace: provide save_stack_trace_tsk()
weak alias") a dummy implementation is provided if STACKTRACE=y. Given
that LATENCYTOP already depends on STACKTRACE_SUPPORT and selects
STACKTRACE, we can remove HAVE_LATENCYTOP_SUPPORT altogether.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Helge Deller <deller@gmx.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_dev_page() enables paths like get_user_pages() to pin a dynamically
mapped pfn-range (devm_memremap_pages()) while the resulting struct page
objects are in use. Unlike get_page() it may fail if the device is, or
is in the process of being, disabled. While the initial lookup of the
range may be an expensive list walk, the result is cached to speed up
subsequent lookups which are likely to be in the same mapped range.
devm_memremap_pages() now requires a reference counter to be specified
at init time. For pmem this means moving request_queue allocation into
pmem_alloc() so the existing queue usage counter can track "device
pages".
ZONE_DEVICE pages always have an elevated count and will never be on an
lru reclaim list. That space in 'struct page' can be redirected for
other uses, but for safety introduce a poison value that will always
trip __list_add() to assert. This allows half of the struct list_head
storage to be reclaimed with some assurance to back up the assumption
that the page count never goes to zero and a list_add() is never
attempted.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Ground work for the new Power9 MMU from Aneesh Kumar K.V
- Optimise FP/VMX/VSX context switching from Anton Blanchard
- Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica Gupta,
Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling, Andrew Donnellan
- Allow wrapper to work on non-english system from Laurent Vivier
- Add rN aliases to the pt_regs_offset table from Rashmica Gupta
- Fix module autoload for rackmeter & axonram drivers from Luis de Bethencourt
- Include KVM guest test in all interrupt vectors from Paul Mackerras
- Fix DSCR inheritance over fork() from Anton Blanchard
- Make value-returning atomics & {cmp}xchg* & their atomic_ versions fully ordered from Boqun Feng
- Print MSR TM bits in oops messages from Michael Neuling
- Add TM signal return & invalid stack selftests from Michael Neuling
- Limit EPOW reset event warnings from Vipin K Parashar
- Remove the Cell QPACE code from Rashmica Gupta
- Append linux_banner to exception information in xmon from Rashmica Gupta
- Add selftest to check if VSRs are corrupted from Rashmica Gupta
- Remove broken GregorianDay() from Daniel Axtens
- Import Anton's context_switch2 benchmark into selftests from Michael Ellerman
- Add selftest script to test HMI functionality from Daniel Axtens
- Remove obsolete OPAL v2 support from Stewart Smith
- Make enter_rtas() private from Michael Ellerman
- PPR exception cleanups from Michael Ellerman
- Add page soft dirty tracking from Laurent Dufour
- Add support for Nvlink NPUs from Alistair Popple
- Add support for kexec on 476fpe from Alistair Popple
- Enable kernel CPU dlpar from sysfs from Nathan Fontenot
- Copy only required pieces of the mm_context_t to the paca from Michael Neuling
- Add a kmsg_dumper that flushes OPAL console output on panic from Russell Currey
- Implement save_stack_trace_regs() to enable kprobe stack tracing from Steven Rostedt
- Add HWCAP bits for Power9 from Michael Ellerman
- Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
- Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
- scripts/recordmcount.pl: support data in text section on powerpc from Ulrich Weigand
- Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand
- cxl: Fix possible idr warning when contexts are released from Vaibhav Jain
- cxl: use correct operator when writing pcie config space values from Andrew Donnellan
- cxl: Fix DSI misses when the context owning task exits from Vaibhav Jain
- cxl: fix build for GCC 4.6.x from Brian Norris
- cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
- cxl: Enable PCI device ID for future IBM CXL adapter from Uma Krishnan
- Freescale updates from Scott: Highlights include moving QE code out of
arch/powerpc (to be shared with arm), device tree updates, and minor fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=R5bX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Core:
- Ground work for the new Power9 MMU from Aneesh Kumar K.V
- Optimise FP/VMX/VSX context switching from Anton Blanchard
Misc:
- Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica
Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling,
Andrew Donnellan
- Allow wrapper to work on non-english system from Laurent Vivier
- Add rN aliases to the pt_regs_offset table from Rashmica Gupta
- Fix module autoload for rackmeter & axonram drivers from Luis de
Bethencourt
- Include KVM guest test in all interrupt vectors from Paul Mackerras
- Fix DSCR inheritance over fork() from Anton Blanchard
- Make value-returning atomics & {cmp}xchg* & their atomic_ versions
fully ordered from Boqun Feng
- Print MSR TM bits in oops messages from Michael Neuling
- Add TM signal return & invalid stack selftests from Michael Neuling
- Limit EPOW reset event warnings from Vipin K Parashar
- Remove the Cell QPACE code from Rashmica Gupta
- Append linux_banner to exception information in xmon from Rashmica
Gupta
- Add selftest to check if VSRs are corrupted from Rashmica Gupta
- Remove broken GregorianDay() from Daniel Axtens
- Import Anton's context_switch2 benchmark into selftests from
Michael Ellerman
- Add selftest script to test HMI functionality from Daniel Axtens
- Remove obsolete OPAL v2 support from Stewart Smith
- Make enter_rtas() private from Michael Ellerman
- PPR exception cleanups from Michael Ellerman
- Add page soft dirty tracking from Laurent Dufour
- Add support for Nvlink NPUs from Alistair Popple
- Add support for kexec on 476fpe from Alistair Popple
- Enable kernel CPU dlpar from sysfs from Nathan Fontenot
- Copy only required pieces of the mm_context_t to the paca from
Michael Neuling
- Add a kmsg_dumper that flushes OPAL console output on panic from
Russell Currey
- Implement save_stack_trace_regs() to enable kprobe stack tracing
from Steven Rostedt
- Add HWCAP bits for Power9 from Michael Ellerman
- Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
- Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
- scripts/recordmcount.pl: support data in text section on powerpc
from Ulrich Weigand
- Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand
cxl:
- cxl: Fix possible idr warning when contexts are released from
Vaibhav Jain
- cxl: use correct operator when writing pcie config space values
from Andrew Donnellan
- cxl: Fix DSI misses when the context owning task exits from Vaibhav
Jain
- cxl: fix build for GCC 4.6.x from Brian Norris
- cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
- cxl: Enable PCI device ID for future IBM CXL adapter from Uma
Krishnan
Freescale:
- Freescale updates from Scott: Highlights include moving QE code out
of arch/powerpc (to be shared with arm), device tree updates, and
minor fixes"
* tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits)
powerpc/module: Handle R_PPC64_ENTRY relocations
scripts/recordmcount.pl: support data in text section on powerpc
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff
powerpc/mm: Fix _PAGE_PTE breaking swapoff
cxl: Enable PCI device ID for future IBM CXL adapter
cxl: use -Werror only with CONFIG_PPC_WERROR
cxl: fix build for GCC 4.6.x
powerpc: Add HWCAP bits for Power9
powerpc/powernv: Reserve PE#0 on NPU
powerpc/powernv: Change NPU PE# assignment
powerpc/powernv: Fix update of NVLink DMA mask
powerpc/powernv: Remove misleading comment in pci.c
powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing
powerpc: Fix build break due to paca mm_context_t changes
cxl: Fix DSI misses when the context owning task exits
MAINTAINERS: Update Scott Wood's e-mail address
powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery()
powerpc: Fix style of self-test config prompts
powerpc/powernv: Only delay opal_rtc_read() retry when necessary
...
Merge first patch-bomb from Andrew Morton:
- A few hotfixes which missed 4.4 becasue I was asleep. cc'ed to
-stable
- A few misc fixes
- OCFS2 updates
- Part of MM. Including pretty large changes to page-flags handling
and to thp management which have been buffered up for 2-3 cycles now.
I have a lot of MM material this time.
[ It turns out the THP part wasn't quite ready, so that got dropped from
this series - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
zsmalloc: reorganize struct size_class to pack 4 bytes hole
mm/zbud.c: use list_last_entry() instead of list_tail_entry()
zram/zcomp: do not zero out zcomp private pages
zram: pass gfp from zcomp frontend to backend
zram: try vmalloc() after kmalloc()
zram/zcomp: use GFP_NOIO to allocate streams
mm: add tracepoint for scanning pages
drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64
mm/page_isolation: use macro to judge the alignment
mm: fix noisy sparse warning in LIBCFS_ALLOC_PRE()
mm: rework virtual memory accounting
include/linux/memblock.h: fix ordering of 'flags' argument in comments
mm: move lru_to_page to mm_inline.h
Documentation/filesystems: describe the shared memory usage/accounting
memory-hotplug: don't BUG() in register_memory_resource()
hugetlb: make mm and fs code explicitly non-modular
mm/swapfile.c: use list_for_each_entry_safe in free_swap_count_continuations
mm: /proc/pid/clear_refs: no need to clear VM_SOFTDIRTY in clear_soft_dirty_pmd()
mm: make sure isolate_lru_page() is never called for tail page
vmstat: make vmstat_updater deferrable again and shut down on idle
...
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
floppy: make local variable non-static
exynos: fixes an incorrect header guard
dt-bindings: fixes some incorrect header guards
cpufreq-dt: correct dead link in documentation
cpufreq: ARM big LITTLE: correct dead link in documentation
treewide: Fix typos in printk
Documentation: filesystem: Fix typo in fs/eventfd.c
fs/super.c: use && instead of & for warn_on condition
Documentation: fix sysfs-ptp
lib: scatterlist: fix Kconfig description
In include/asm-generic/sections.h:
/*
* Usage guidelines:
* _text, _data: architecture specific, don't use them in
* arch-independent code
* [_stext, _etext]: contains .text.* sections, may also contain
* .rodata.*
* and/or .init.* sections
_text is not guaranteed across architectures. Architectures such as ARM
may reuse parts which are not actually text and erroneously trigger a bug.
Switch to using _stext which is guaranteed to contain text sections.
Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1/ Media error handling: The 'badblocks' implementation that originated
in md-raid is up-levelled to a generic capability of a block device.
This initial implementation is limited to being consulted in the pmem
block-i/o path. Later, 'badblocks' will be consulted when creating
dax mappings.
2/ Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability to
dax-mmap a block device directly.
3/ Increased /dev/mem restrictions: Add an option to treat all io-memory
as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is
actively using an address range. This behavior is controlled via the
new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the
existing "iomem=relaxed" kernel command line option.
4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7V5r
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has appeared in -next and independently received a
build success notification from the kbuild robot. The 'for-4.5/block-
dax' topic branch was rebased over the weekend to drop the "block
device end-of-life" rework that Al would like to see re-implemented
with a notifier, and to address bug reports against the badblocks
integration.
There is pending feedback against "libnvdimm: Add a poison list and
export badblocks" received last week. Linda identified some localized
fixups that we will handle incrementally.
Summary:
- Media error handling: The 'badblocks' implementation that
originated in md-raid is up-levelled to a generic capability of a
block device. This initial implementation is limited to being
consulted in the pmem block-i/o path. Later, 'badblocks' will be
consulted when creating dax mappings.
- Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability
to dax-mmap a block device directly.
- Increased /dev/mem restrictions: Add an option to treat all
io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
while a driver is actively using an address range. This behavior
is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
overridden by the existing "iomem=relaxed" kernel command line
option.
- Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes"
* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
block: kill disk_{check|set|clear|alloc}_badblocks
libnvdimm, pmem: nvdimm_read_bytes() badblocks support
pmem, dax: disable dax in the presence of bad blocks
pmem: fail io-requests to known bad blocks
libnvdimm: convert to statically allocated badblocks
libnvdimm: don't fail init for full badblocks list
block, badblocks: introduce devm_init_badblocks
block: clarify badblocks lifetime
badblocks: rename badblocks_free to badblocks_exit
libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
libnvdimm: Add a poison list and export badblocks
nfit_test: Enable DSMs for all test NFITs
md: convert to use the generic badblocks code
block: Add badblock management for gendisks
badblocks: Add core badblock management code
block: fix del_gendisk() vs blkdev_ioctl crash
block: enable dax for raw block devices
block: introduce bdev_file_inode()
restrict /dev/mem to idle io memory ranges
arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
...
minor fixes.
Here's what else is new:
o A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
o New selftest to test the instance create and delete
o Better debug output when ftrace fails
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlU8tAAoJEKKk/i67LK/8JckH/2XIhjwMunm35uCg1308sDqy
d44G3+p0pm8ztjBf8iD8wH2nP3m7z+nC8JBmSPIUgAHsKOYHWsBy2A/36OVWv5lK
1hVXvBwOuZXnyWXr7bC2RO9S9f9acSFaabZXWDi1BCJRJSgEcknz32V7ZAL4jOCO
SfBWBNrWJfUsURbfbElfVxPLArvyUg9Bb5dW5B+QFf6PuoJaORYzNLYXHlbsq++T
WlrlnD+mFZ/DKFZ/gl3FMSGMPaGimw09/3eqMzv/tLQobp6PbCWlJTwjUoxJ/9dO
XOY4sWUrUUZilU8qCk0i0ZSEumWmE+SWS3eq+Ef18B/5haIj/LkoM4UQD3h2Rc4=
=FDR+
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Not much new with tracing for this release. Mostly just clean ups and
minor fixes.
Here's what else is new:
- A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
- New selftest to test the instance create and delete
- Better debug output when ftrace fails"
* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
ftrace: Fix the race between ftrace and insmod
ftrace: Add infrastructure for delayed enabling of module functions
x86: ftrace: Fix the comments for ftrace_modify_code_direct()
tracing: Fix comment to use tracing_on over tracing_enable
metag: ftrace: Fix the comments for ftrace_modify_code
sh: ftrace: Fix the comments for ftrace_modify_code()
ia64: ftrace: Fix the comments for ftrace_modify_code()
ftrace: Clean up ftrace_module_init() code
ftrace: Join functions ftrace_module_init() and ftrace_init_module()
tracing: Introduce TRACE_EVENT_FN_COND macro
tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
bpf: Constify bpf_verifier_ops structure
ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
ftrace: Remove use of control list and ops
ftrace: Fix output of enabled_functions for showing tramp
ftrace: Fix a typo in comment
ftrace: Show all tramps registered to a record on ftrace_bug()
ftrace: Add variable ftrace_expected for archs to show expected code
ftrace: Add new type to distinguish what kind of ftrace_bug()
tracing: Update cond flag when enabling or disabling a trigger
...
Pull networking updates from Davic Miller:
1) Support busy polling generically, for all NAPI drivers. From Eric
Dumazet.
2) Add byte/packet counter support to nft_ct, from Floriani Westphal.
3) Add RSS/XPS support to mvneta driver, from Gregory Clement.
4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
Frederic Sowa.
5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.
6) Add support for VLAN device bridging to mlxsw switch driver, from
Ido Schimmel.
7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.
8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.
9) Reorganize wireless drivers into per-vendor directories just like we
do for ethernet drivers. From Kalle Valo.
10) Provide a way for administrators "destroy" connected sockets via the
SOCK_DESTROY socket netlink diag operation. From Lorenzo Colitti.
11) Add support to add/remove multicast routes via netlink, from Nikolay
Aleksandrov.
12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.
13) Add forwarding and packet duplication facilities to nf_tables, from
Pablo Neira Ayuso.
14) Dead route support in MPLS, from Roopa Prabhu.
15) TSO support for thunderx chips, from Sunil Goutham.
16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.
17) Rationalize, consolidate, and more completely document the checksum
offloading facilities in the networking stack. From Tom Herbert.
18) Support aborting an ongoing scan in mac80211/cfg80211, from
Vidyullatha Kanchanapally.
19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
net: bnxt: always return values from _bnxt_get_max_rings
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
phy: remove an unneeded condition
mdio: remove an unneed condition
mdio_bus: NULL dereference on allocation error
net: Fix typo in netdev_intersect_features
net: freescale: mac-fec: Fix build error from phy_device API change
net: freescale: ucc_geth: Fix build error from phy_device API change
bonding: Prevent IPv6 link local address on enslaved devices
IB/mlx5: Add flow steering support
net/mlx5_core: Export flow steering API
net/mlx5_core: Make ipv4/ipv6 location more clear
net/mlx5_core: Enable flow steering support for the IB driver
net/mlx5_core: Initialize namespaces only when supported by device
net/mlx5_core: Set priority attributes
net/mlx5_core: Connect flow tables
net/mlx5_core: Introduce modify flow table command
net/mlx5_core: Managing root flow table
...
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
Pull iov_iter infrastructure updates from Al Viro:
"A couple of iov_iter updates"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: export import_single_range()
iov_iter: constify {csum_and_,}copy_to_iter()
- Optimize boot time by detecting cards simultaneously
- Make runtime resume default behavior for MMC/SD
- Enable MMC/SD/SDIO devices to suspend/resume asynchronously
- Allow more than 8 partitions per card
- Introduce MMC_CAP2_NO_SDIO to prevent unsupported SDIO commands
- Support the standard DT wakeup-source property
- Fix driver strength switching for HS200 and HS400
- Fix switch command timeout
- Fix invalid vdd in voltage switch power cycle for SDIO
MMC host:
- sdhci: Restore behavior when setting VDD via external regulator
- sdhci: A couple of changes/fixes related to the dma support
- sdhci-tegra: Add Tegra210 support
- sdhci-tegra: Support for UHS-I cards including tuning support
- sdhci-of-at91: Add PM support
- sh_mmcif: Rework dma channel handling
- mvsdio: Delete platform data code path
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=p5RF
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Optimize boot time by detecting cards simultaneously
- Make runtime resume default behavior for MMC/SD
- Enable MMC/SD/SDIO devices to suspend/resume asynchronously
- Allow more than 8 partitions per card
- Introduce MMC_CAP2_NO_SDIO to prevent unsupported SDIO commands
- Support the standard DT wakeup-source property
- Fix driver strength switching for HS200 and HS400
- Fix switch command timeout
- Fix invalid vdd in voltage switch power cycle for SDIO
MMC host:
- sdhci: Restore behavior when setting VDD via external regulator
- sdhci: A couple of changes/fixes related to the dma support
- sdhci-tegra: Add Tegra210 support
- sdhci-tegra: Support for UHS-I cards including tuning support
- sdhci-of-at91: Add PM support
- sh_mmcif: Rework dma channel handling
- mvsdio: Delete platform data code path"
* tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc: (52 commits)
mmc: dw_mmc: remove the unused quirks
mmc: sdhci-pci: use to_pci_dev()
mmc: cb710: use to_platform_device()
mmc: tegra: use correct accessor for misc ctrl register
mmc: tegra: enable UHS-I modes
mmc: tegra: implement UHS tuning
mmc: tegra: disable SPI_MODE_CLKEN
mmc: tegra: implement module external clock change
mmc: sdhci: restore behavior when setting VDD via external regulator
mmc: It is not an error for the card to be removed while suspended
mmc: block: Allow more than 8 partitions per card
mmc: core: Optimize boot time by detecting cards simultaneously
mmc: dw_mmc: use resource_size_t to store physical address
mmc: core: fix __mmc_switch timeout caused by preempt
mmc: usdhi6rol0: handle NULL data in timeout
mmc: of_mmc_spi: Add IRQF_ONESHOT to interrupt flags
mmc: mediatek: change some dev_err to dev_dbg
mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously
mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
mmc: sdhci: 64-bit DMA actually has 4-byte alignment
...
Pull workqueue update from Tejun Heo:
"Workqueue changes for v4.5. One cleanup patch and three to improve
the debuggability.
Workqueue now has a stall detector which dumps workqueue state if any
worker pool hasn't made forward progress over a certain amount of time
(30s by default) and also triggers a warning if a workqueue which can
be used in memory reclaim path tries to wait on something which can't
be.
These should make workqueue hangs a lot easier to debug."
* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: simplify the apply_workqueue_attrs_locked()
workqueue: implement lockup detector
watchdog: introduce touch_softlockup_watchdog_sched()
workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Intel Knights Landing support. (Harish Chegondi)
- Intel Broadwell-EP uncore PMU support. (Kan Liang)
- Core code improvements. (Peter Zijlstra.)
- Event filter, LBR and PEBS fixes. (Stephane Eranian)
- Enable cycles:pp on Intel Atom. (Stephane Eranian)
- Add cycles:ppp support for Skylake. (Andi Kleen)
- Various x86 NMI overhead optimizations. (Andi Kleen)
- Intel PT enhancements. (Takao Indoh)
- AMD cache events fix. (Vince Weaver)
Tons of tooling changes:
- Show random perf tool tips in the 'perf report' bottom line
(Namhyung Kim)
- perf report now defaults to --group if the perf.data file has
grouped events, try it with:
# perf record -e '{cycles,instructions}' -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ]
# perf report
# Samples: 1K of event 'anon group { cycles, instructions }'
# Event count (approx.): 1955219195
#
# Overhead Command Shared Object Symbol
2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle
1.05% 0.33% firefox libxul.so [.] js::SetObjectElement
1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno
0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab
0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1>
0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay
0.62% 1.27% firefox libxul.so [.] js::GetIterator
0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty
0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining
- Introduce the 'perf stat record/report' workflow:
Generate perf.data files from 'perf stat', to tap into the
scripting capabilities perf has instead of defining a 'perf stat'
specific scripting support to calculate event ratios, etc.
Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to
not generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
- Make command line options always available, even when they depend
on some feature being enabled, warning the user about use of such
options (Wang Nan)
- Support hw breakpoint events (mem:0xAddress) in the default output
mode in 'perf script' (Wang Nan)
- Fixes and improvements for supporting annotating ARM binaries,
support ARM call and jump instructions, more work needed to have
arch specific stuff separated into tools/perf/arch/*/annotate/
(Russell King)
- Add initial 'perf config' command, for now just with a --list
command to the contents of the configuration file in use and a
basic man page describing its format, commands for doing edits and
detailed documentation are being reviewed and proof-read. (Taeung
Song)
- Allows BPF scriptlets specify arguments to be fetched using DWARF
info, using a prologue generated at compile/build time (He Kuang,
Wang Nan)
- Allow attaching BPF scriptlets to module symbols (Wang Nan)
- Allow attaching BPF scriptlets to userspace code using uprobe (Wang
Nan)
- BPF programs now can specify 'perf probe' tunables via its section
name, separating key=val values using semicolons (Wang Nan)
Testing some of these new BPF features:
Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.
# cat ssl.bpf.c
#define SEC(NAME) __attribute__((section(NAME), used))
struct pt_regs;
SEC("func=__inet_lookup_established hnum")
int func(struct pt_regs *ctx, int err, unsigned short port)
{
return err == 0 && port == 443;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf record -a -g -e ssl.bpf.c
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
# perf script | head -30
swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
430a br_handle_frame_finish ([bridge])
48bc br_handle_frame ([bridge])
855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
#
- Use 'perf probe' various options to list functions, see what
variables can be collected at any given point, experiment first
collecting without a filter, then filter, use it together with
'perf trace', 'perf top', with or without callchains, if it
explodes, please tell us!
- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry,
facilitating 'perf report' output processing by other tools, such
as Brendan Gregg's flamegraph tools (Namhyung Kim)
E.g:
# perf report | grep -v ^# | head
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--12.07%--start_secondary
|
--6.30%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
#
Becomes, in "folded" mode:
# perf report -g folded | grep -v ^# | head -5
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
12.07% cpu_startup_entry;start_secondary
6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle
11.23% call_cpuidle;cpu_startup_entry;start_secondary
5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter
11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state
#
The user can also select one of "count", "period" or "percent" as
the first column.
... and lots of infrastructure enhancements, plus fixes and other
changes, features I failed to list - see the shortlog and the git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits)
perf evlist: Add --trace-fields option to show trace fields
perf record: Store data mmaps for dwarf unwind
perf libdw: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Use find_map function in access_dso_mem
perf evlist: Remove perf_evlist__(enable|disable)_event functions
perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
perf report: Show random usage tip on the help line
perf hists: Export a couple of hist functions
perf diff: Use perf_hpp__register_sort_field interface
perf tools: Add overhead/overhead_children keys defaults via string
perf tools: Remove list entry from struct sort_entry
perf tools: Include all tools/lib directory for tags/cscope/TAGS targets
perf script: Align event name properly
perf tools: Add missing headers in perf's MANIFEST
perf tools: Do not show trace command if it's not compiled in
perf report: Change default to use event group view
perf top: Decay periods in callchains
tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/
tools lib: Sync tools/lib/find_bit.c with the kernel
...
Pull locking updates from Ingo Molnar:
"So we have a laundry list of locking subsystem changes:
- continuing barrier API and code improvements
- futex enhancements
- atomics API improvements
- pvqspinlock enhancements: in particular lock stealing and adaptive
spinning
- qspinlock micro-enhancements"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op
futex: Cleanup the goto confusion in requeue_pi()
futex: Remove pointless put_pi_state calls in requeue()
futex: Document pi_state refcounting in requeue code
futex: Rename free_pi_state() to put_pi_state()
futex: Drop refcount if requeue_pi() acquired the rtmutex
locking/barriers, arch: Remove ambiguous statement in the smp_store_mb() documentation
lcoking/barriers, arch: Use smp barriers in smp_store_release()
locking/cmpxchg, arch: Remove tas() definitions
locking/pvqspinlock: Queue node adaptive spinning
locking/pvqspinlock: Allow limited lock stealing
locking/pvqspinlock: Collect slowpath lock statistics
sched/core, locking: Document Program-Order guarantees
locking, sched: Introduce smp_cond_acquire() and use it
locking/pvqspinlock, x86: Optimize the PV unlock code path
locking/qspinlock: Avoid redundant read of next pointer
locking/qspinlock: Prefetch the next node cacheline
locking/qspinlock: Use _acquire/_release() versions of cmpxchg() & xchg()
atomics: Add test for atomic operations with _relaxed variants
This effectively promotes IORESOURCE_BUSY to IORESOURCE_EXCLUSIVE
semantics by default. If userspace really believes it is safe to access
the memory region it can also perform the extra step of disabling an
active driver. This protects device address ranges with read side
effects and otherwise directs userspace to use the driver.
Persistent memory presents a large "mistake surface" to /dev/mem as now
accidental writes can corrupt a filesystem.
In general if a device driver is busily using a memory region it already
informs other parts of the kernel to not touch it via
request_mem_region(). /dev/mem should honor the same safety restriction
by default. Debugging a device driver from userspace becomes more
difficult with this enabled. Any application using /dev/mem or mmap of
sysfs pci resources will now need to perform the extra step of either:
1/ Disabling the driver, for example:
echo <device id> > /dev/bus/<parent bus>/drivers/<driver name>/unbind
2/ Rebooting with "iomem=relaxed" on the command line
3/ Recompiling with CONFIG_IO_STRICT_DEVMEM=n
Traditional users of /dev/mem like dosemu are unaffected because the
first 1MB of memory is not subject to the IO_STRICT_DEVMEM restriction.
Legacy X configurations use /dev/mem to talk to graphics hardware, but
that functionality has since moved to kernel graphics drivers.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Let all the archs that implement devmem_is_allowed() opt-in to a common
definition of CONFIG_STRICT_DEVM in lib/Kconfig.debug.
Cc: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko: drop 'default y' for s390]
Acked-by: Ingo Molnar <mingo@redhat.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We might want to test for bugs like that found in commit f9692b2699
("firmware: fix possible use after free on name on asynchronous
request"), where the asynchronous request API had race conditions.
Let's add a simple file that will launch the async request, then wait
until it's complete and report the status. It's not a true async test
(we're using a mutex + wait_for_completion(), so we can't get more than
one going at the same time), but it does help make sure the basic API is
sane, and it can catch some class of bugs.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
We're essentially just doing an open-coded kstrndup(). The only
differences are with what happens after the first '\0' character, but
request_firmware() doesn't care about that.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
request_firmware() failures currently won't get reported at all (the
error code is discarded). What's more, we get confusing messages, like:
# echo -n notafile > /sys/devices/virtual/misc/test_firmware/trigger_request
[ 8280.311856] test_firmware: loading 'notafile'
[ 8280.317042] test_firmware: load of 'notafile' failed: -2
[ 8280.322445] test_firmware: loaded: 0
# echo $?
0
Report the failures via write() errors, and don't say we "loaded"
anything.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This allow to directly print block_device name.
Currently one should use bdevname() with temporal char buffer.
This is very ineffective because bloat stack usage for deep IO call-traces
Example:
%pg -> sda, sda1 or loop0p1
[AV: fixed a minor braino - position updates should not be dependent
upon having reached the of buffer]
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull RCU changes from Paul E. McKenney:
- Adding transitivity uniformly to rcu_node structure ->lock
acquisitions. (This is implemented by the first two commits
on top of v4.4-rc2 due to the pervasive nature of this change.)
- Documentation updates, including RCU requirements.
- Expedited grace-period changes.
- Miscellaneous fixes.
- Linked-list fixes, courtesy of KTSAN.
- Torture-test updates.
- Late-breaking fix to sysrq-generated crash.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 5ac4837841 ("tracing: Use trace_seq_used() and seq_buf_used()
instead of len") changed the tracing code to use trace_seq_used() and
seq_buf_used() instead of using the seq_buf len directly to avoid
overflow issues, but missed a spot in seq_buf_to_user() that makes use
of s->len.
Cleaned up the code a bit as well per suggestion of Steve Rostedt.
Link: http://lkml.kernel.org/r/1447703848-2951-1-git-send-email-jsnitsel@redhat.com
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove the WARN() from the beN_to_cpu macro, which is used as a param to a
pr_debug() call. With a certain kernel config, this printk-in-printk
results in the no_printk() macro trying to recursively call the
no_printk() macro, and since macros can't recursively call themselves
a build error results.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use genalloc to manage CPM/QE muram instead of rheap.
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Add new algo for genalloc, it reserve a specific region of
memory
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Bytes alignment is required to manage some special RAM,
so add gen_pool_first_fit_align to genalloc,
meanwhile add gen_pool_alloc_algo to pass algo in case user
layer using more than one algo, and pass data to
gen_pool_first_fit_align(modify gen_pool_alloc as a wrapper)
Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Fault-injection capability for MMC IO uses debugfs entries to configure
the attributes.
FAULT_INJECTION_DEBUG_FS must be enabled to use FAIL_MMC_REQUEST.
Replace FAULT_INJECTION with FAULT_INJECTION_DEBUG_FS.
Also remove 'select DEBUG_FS' since FAULT_INJECTION_DEBUG_FS depends on
it.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The commit c6ff526829 ("rhashtable:
Fix walker list corruption") causes a suspicious RCU usage warning
because we no longer hold ht->mutex when we dereference ht->tbl.
However, this is a false positive because we now hold ht->lock
which also guarantees that ht->tbl won't disppear from under us.
This patch kills the warning by using rcu_dereference_protected.
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add couple of test cases for interpreter but also JITs, f.e. to test that
when imm32 moves are being done, upper 32bits of the regs are being zero
extended.
Without JIT:
[...]
[ 1114.129301] test_bpf: #43 MOV REG64 jited:0 128 PASS
[ 1114.130626] test_bpf: #44 MOV REG32 jited:0 139 PASS
[ 1114.132055] test_bpf: #45 LD IMM64 jited:0 124 PASS
[...]
With JIT (generated code can as usual be nicely verified with the help of
bpf_jit_disasm tool):
[...]
[ 1062.726782] test_bpf: #43 MOV REG64 jited:1 6 PASS
[ 1062.726890] test_bpf: #44 MOV REG32 jited:1 6 PASS
[ 1062.726993] test_bpf: #45 LD IMM64 jited:1 6 PASS
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/geneve.c
Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of
people reported this... From Arnd Bergmann.
2) Don't init mutex twice in i40e driver, from Jesse Brandeburg.
3) Fix spurious EBUSY in rhashtable, from Herbert Xu.
4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas.
5) Fix race with work structure access in pppoe driver causing
corruptions, from Guillaume Nault.
6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb()
actually succeeded or not, from Sergei Shtylyov.
7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from
Bjørn Mork.
8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc.
9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo
Leitner.
10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven.
11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling
properly as well, from Jiri Benc.
12) Handle request sockets properly in xfrm layer, from Eric Dumazet.
13) Double stats update in ipv6 geneve transmit path, fix from Pravin B
Shelar.
14) sk->sk_policy[] needs RCU protection, and as a result
xfrm_policy_destroy() needs to free policies using an RCU grace
period, from Eric Dumazet.
15) SCTP needs to clone ipv6 tx options in order to avoid use after
free, from Eric Dumazet.
16) Missing kbuild export if ila.h, from Stephen Hemminger.
17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from
Tobias Klauser.
18) Validate protocol value range in ->create() methods, from Hannes
Frederic Sowa.
19) Fix early socket demux races that result in illegal dst reuse, from
Eric Dumazet.
20) Validate socket address length in pptp code, from WANG Cong.
21) skb_reorder_vlan_header() uses incorrect offset and can corrupt
packets, from Vlad Yasevich.
22) Fix memory leaks in nl80211 registry code, from Ola Olsson.
23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and
qlcnic. From Dan Carpenter.
24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for
example, AF_ALG will interpret it as an async call. From Tadeusz
Struk.
25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from
Eric Dumazet.
26) rhashtable enforces the minimum table size not early enough,
breaking how we calculate the per-cpu lock allocations. From
Herbert Xu.
27) Fix FCC port lockup in 82xx driver, from Martin Roth.
28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa.
29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and
sock_setsockopt() wrt. timestamp handling. From WANG Cong.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits)
net: check both type and procotol for tcp sockets
drivers: net: xgene: fix Tx flow control
tcp: restore fastopen with no data in SYN packet
af_unix: Revert 'lock_interruptible' in stream receive code
fou: clean up socket with kfree_rcu
82xx: FCC: Fixing a bug causing to FCC port lock-up
gianfar: Don't enable RX Filer if not supported
net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration
rhashtable: Fix walker list corruption
rhashtable: Enforce minimum size on initial hash table
inet: tcp: fix inetpeer_set_addr_v4()
ipv6: automatically enable stable privacy mode if stable_secret set
net: fix uninitialized variable issue
bluetooth: Validate socket address length in sco_sock_bind().
net_sched: make qdisc_tree_decrease_qlen() work for non mq
ser_gigaset: remove unnecessary kfree() calls from release method
ser_gigaset: fix deallocation of platform device structure
ser_gigaset: turn nonsense checks into WARN_ON
ser_gigaset: fix up NULL checks
qlcnic: fix a timeout loop
...
Pull libnvdimm fixes from Dan Williams:
- Two bug fixes for misuse of PAGE_MASK in scatterlist and dma-debug.
These are tagged for -stable. The scatterlist impact is potentially
corrupted dma addresses on HIGHMEM enabled platforms.
- A minor locking fix for the NFIT hot-add implementation that is new
in 4.4-rc. This would only trigger in the case a hot-add raced
driver removal.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dma-debug: Fix dma_debug_entry offset calculation
Revert "scatterlist: use sg_phys()"
nfit: acpi_nfit_notify(): Do not leave device locked
This converts the generic user string functions to use the batched user
access functions.
It makes a big difference on Skylake, which is the first x86
microarchitecture to implement SMAP. The STAC/CLAC instructions are not
very fast, and doing them for each access inside the loop that copies
strings from user space (which is what the pathname handling does for
every pathname the kernel uses, for example) is very inefficient.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dma-debug uses struct dma_debug_entry to keep track of dma coherent
memory allocation requests. The virtual address is converted into a pfn
and an offset. Previously, the offset was calculated using an incorrect
bit mask. As a result, we saw incorrect error messages from dma-debug
like the following:
"DMA-API: exceeded 7 overlapping mappings of cacheline 0x03e00000"
Cacheline 0x03e00000 does not exist on our platform.
Cc: <stable@vger.kernel.org>
Fixes: 0abdd7a81b ("dma-debug: introduce debug_dma_assert_idle()")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The commit ba7c95ea38 ("rhashtable:
Fix sleeping inside RCU critical section in walk_stop") introduced
a new spinlock for the walker list. However, it did not convert
all existing users of the list over to the new spin lock. Some
continued to use the old mutext for this purpose. This obviously
led to corruption of the list.
The fix is to use the spin lock everywhere where we touch the list.
This also allows us to do rcu_rad_lock before we take the lock in
rhashtable_walk_start. With the old mutex this would've deadlocked
but it's safe with the new spin lock.
Fixes: ba7c95ea38 ("rhashtable: Fix sleeping inside RCU...")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Hua <william.hua@canonical.com> wrote:
>
> I wasn't aware there was an enforced minimum size. I simply set the
> nelem_hint in the rhastable_params struct to 1, expecting it to grow as
> needed. This caused a segfault afterwards when trying to insert an
> element.
OK we're doing the size computation before we enforce the limit
on min_size.
---8<---
We need to do the initial hash table size computation after we
have obtained the correct min_size/max_size parameters. Otherwise
we may end up with a hash table whose size is outside the allowed
envelope.
Fixes: a998f712f7 ("rhashtable: Round up/down min/max_size to...")
Reported-by: William Hua <william.hua@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no good reason to keep them apart, and this makes using the API
a bit simpler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
There is no good reason to start out disabled - drivers can control if
the poll instance can be scheduled by simply not scheduling it yet.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
The new name is irq_poll as iopoll is already taken. Better suggestions
welcome.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
The patch 9497df88ab ("rhashtable:
Fix reader/rehash race") added a pair of barriers. In fact the
wmb is superfluous because every subsequent write to the old or
new hash table uses rcu_assign_pointer, which itself carriers a
full barrier prior to the assignment.
Therefore we may remove the explicit wmb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Workqueue stalls can happen from a variety of usage bugs such as
missing WQ_MEM_RECLAIM flag or concurrency managed work item
indefinitely staying RUNNING. These stalls can be extremely difficult
to hunt down because the usual warning mechanisms can't detect
workqueue stalls and the internal state is pretty opaque.
To alleviate the situation, this patch implements workqueue lockup
detector. It periodically monitors all worker_pools periodically and,
if any pool failed to make forward progress longer than the threshold
duration, triggers warning and dumps workqueue state as follows.
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 31s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=17/256
pending: monkey_wrench_fn, e1000_watchdog, cache_reap, vmstat_shepherd, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, cgroup_release_agent
workqueue events_power_efficient: flags=0x80
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
pending: check_lifetime, neigh_periodic_work
workqueue cgroup_pidlist_destroy: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
pending: cgroup_pidlist_destroy_work_fn
...
The detection mechanism is controller through kernel parameter
workqueue.watchdog_thresh and can be updated at runtime through the
sysfs module parameter file.
v2: Decoupled from softlockup control knobs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
asm/atomic.h doesn't really need asm/processor.h anymore. Everything
it uses has moved to other header files. So remove that include.
processor.h is a nasty header that includes lots of
other headers and makes it prone to include loops. Removing the
include here makes asm/atomic.h a "leaf" header that can
be safely included in most other headers.
The only fallout is in the lib/atomic tester which relied on
this implicit include. Give it an explicit include.
(the include is in ifdef because the user is also in ifdef)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1449018060-1742-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit d3716f18a7.
vmalloc cannot be used in BH disabled contexts, even
with GFP_ATOMIC. And we certainly want to support
rhashtable users inserting entries with software
interrupts disabled.
Signed-off-by: David S. Miller <davem@davemloft.net>
When an rhashtable user pounds rhashtable hard with back-to-back
insertions we may end up growing the table in GFP_ATOMIC context.
Unfortunately when the table reaches a certain size this often
fails because we don't have enough physically contiguous pages
to hold the new table.
Eric Dumazet suggested (and in fact wrote this patch) using
__vmalloc instead which can be used in GFP_ATOMIC context.
Reported-by: Phil Sutter <phil@nwl.cc>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas and Phil observed that under stress rhashtable insertion
sometimes failed with EBUSY, even though this error should only
ever been seen when we're under attack and our hash chain length
has grown to an unacceptable level, even after a rehash.
It turns out that the logic for detecting whether there is an
existing rehash is faulty. In particular, when two threads both
try to grow the same table at the same time, one of them may see
the newly grown table and thus erroneously conclude that it had
been rehashed. This is what leads to the EBUSY error.
This patch fixes this by remembering the current last table we
used during insertion so that rhashtable_insert_rehash can detect
when another thread has also done a resize/rehash. When this is
detected we will give up our resize/rehash and simply retry the
insertion with the new table.
Reported-by: Thomas Graf <tgraf@suug.ch>
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since CHANGEUPPER can now fail, add support for it in the newly
introduced netdev notifier error injection infrastructure.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module allows to insert errors in some of netdevice's notifier
events. All network drivers use these notifiers to signal various events
and to check if they are allowed, e.g. PRECHANGEMTU and CHANGEMTU
afterwards. Until recently I had to run failure tests by injecting
a custom module, but now this infrastructure makes it trivial to test
these failure paths. Some of the recent bugs I fixed were found using
this module.
Here's an example:
$ cd /sys/kernel/debug/notifier-error-inject/netdev
$ echo -22 > actions/NETDEV_CHANGEMTU/error
$ ip link set eth0 mtu 1024
RTNETLINK answers: Invalid argument
CC: Akinobu Mita <akinobu.mita@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev <netdev@vger.kernel.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The enable_kernel_*() functions leave the relevant MSR bits enabled
until we exit the kernel sometime later. Create disable versions
that wrap the kernel use of FP, Altivec VSX or SPE.
While we don't want to disable it normally for performance reasons
(MSR writes are slow), it will be used for a debug boot option that
does this and catches bad uses in other areas of the kernel.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix the semantic of lc_seq_printf. Currently, it always returns 0 and
the return value is unused, therefore, convert the return type to void.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Code that does lockless emptiness testing of non-RCU lists is relying
on the list-addition code to write the list head's ->next pointer
atomically. This commit therefore adds WRITE_ONCE() to list-addition
pointer stores that could affect the head's ->next pointer.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This is rather a hack to expose the current issue with rhashtable to
under high pressure sometimes return -ENOMEM even though system memory
is not exhausted and a consecutive insert may succeed.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
A maximum table size of 64k entries is insufficient for the multiple
threads test even in default configuration (10 threads * 50000 objects =
500000 objects in total). Since we know how many objects will be
inserted, calculate the max size unless overridden by parameter.
Note that specifying the exact number of objects upon table init won't
suffice as that value is being rounded down to the next power of two -
anticipate this by rounding up to the next power of two in beforehand.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
After adding cond_resched() calls to threadfunc(), a surprisingly high
rate of insert failures occurred probably due to table resizes getting a
better chance to run in background. To not soften up the remaining
tests, retry inserts until they either succeed or fail permanently.
Also change the non-threaded test to retry insert operations, too.
Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
This should fix for soft lockup bugs triggered on slow systems.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some atomic operations now have _relaxed/acquire/release variants, this
patch adds some trivial tests for two purposes:
1. test the behavior of these new operations in single-CPU
environment.
2. make their code generated before we actually use them somewhere,
so that we can examine their assembly code.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1446634365-25176-1-git-send-email-boqun.feng@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There were still a number of references to my old Red Hat email
address in the kernel source. Remove these while keeping the
Red Hat copyright notices intact.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since mpi_write_to_sgl and mpi_read_buffer explicitly left-align the
integers being written it makes no sense to require a buffer big enough for
the number + the leading zero bytes which are not written. The error
returned also doesn't convey any information. So instead require only the
size needed and return -EOVERFLOW to signal when buffer too short.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some architectures may want to override the default implementation
at compile time to do things inline. For example, ARM uses a
non-standard calling convention for better efficiency in this case.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Merge final patch-bomb from Andrew Morton:
"Various leftovers, mainly Christoph's pci_dma_supported() removals"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
pci: remove pci_dma_supported
usbnet: remove ifdefed out call to dma_supported
kaweth: remove ifdefed out call to dma_supported
sfc: don't call dma_supported
nouveau: don't call pci_dma_supported
netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported
cx23885: use pci_set_dma_mask insted of pci_dma_supported
cx25821: use pci_set_dma_mask insted of pci_dma_supported
cx88: use pci_set_dma_mask insted of pci_dma_supported
saa7134: use pci_set_dma_mask insted of pci_dma_supported
saa7164: use pci_set_dma_mask insted of pci_dma_supported
tw68-core: use pci_set_dma_mask insted of pci_dma_supported
pcnet32: use pci_set_dma_mask insted of pci_dma_supported
lib/string.c: add ULL suffix to the constant definition
hugetlb: trivial comment fix
selftests/mlock2: add ULL suffix to 64-bit constants
selftests/mlock2: add missing #define _GNU_SOURCE
Pull networking fixes from David Miller:
1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.
2) Several spots need to get to the original listner for SYN-ACK
packets, most spots got this ok but some were not. Whilst covering
the remaining cases, create a helper to do this. From Eric Dumazet.
3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
from Rasmus Villemoes.
4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.
5) Use after free in mvneta driver, from Justin Maggard.
6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.
7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd
Bergmann.
8) Fix multicast getsockopt deadlock, from WANG Cong.
9) Fix deadlock in btusb, from Kuba Pawlak.
10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
counter state. From Sabrina Dubroca.
11) Fix packet_bind() race, which can cause lost notifications, from
Francesco Ruggeri.
12) Fix MAC restoration in qlcnic driver during bonding mode changes,
from Jarod Wilson.
13) Revert bridging forward delay change which broke libvirt and other
userspace things, from Vlad Yasevich.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
Revert "bridge: Allow forward delay to be cfgd when STP enabled"
bpf_trace: Make dependent on PERF_EVENTS
qed: select ZLIB_INFLATE
net: fix a race in dst_release()
net: mvneta: Fix memory use after free.
net: Documentation: Fix default value tcp_limit_output_bytes
macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
mvneta: add FIXED_PHY dependency
net: caif: check return value of alloc_netdev
net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
drivers: net: xgene: fix RGMII 10/100Mb mode
netfilter: nft_meta: use skb_to_full_sk() helper
net_sched: em_meta: use skb_to_full_sk() helper
sched: cls_flow: use skb_to_full_sk() helper
netfilter: xt_owner: use skb_to_full_sk() helper
smack: use skb_to_full_sk() helper
net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
bpf: doc: correct arch list for supported eBPF JIT
dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
bonding: fix panic on non-ARPHRD_ETHER enslave failure
...
8-byte constant is too big for long and compiler complains about this.
lib/string.c:907:20: warning: constant 0x0101010101010101 is so big it is long
Append ULL suffix to explicitly show its type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WtDm
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Nothing exciting, minor tweaks and cleanups"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
scripts: [modpost] add new sections to white list
modpost: Add flag -E for making section mismatches fatal
params: don't ignore the rest of cmdline if parse_one() fails
modpost: abort if a module symbol is too long
Switch everything to the new and more capable implementation of abs().
Mainly to give the new abs() a bit of a workout.
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge second patch-bomb from Andrew Morton:
- most of the rest of MM
- procfs
- lib/ updates
- printk updates
- bitops infrastructure tweaks
- checkpatch updates
- nilfs2 update
- signals
- various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc,
dma-debug, dma-mapping, ...
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
ipc,msg: drop dst nil validation in copy_msg
include/linux/zutil.h: fix usage example of zlib_adler32()
panic: release stale console lock to always get the logbuf printed out
dma-debug: check nents in dma_sync_sg*
dma-mapping: tidy up dma_parms default handling
pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
kexec: use file name as the output message prefix
fs, seqfile: always allow oom killer
seq_file: reuse string_escape_str()
fs/seq_file: use seq_* helpers in seq_hex_dump()
coredump: change zap_threads() and zap_process() to use for_each_thread()
coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
signals: kill block_all_signals() and unblock_all_signals()
nilfs2: fix gcc uninitialized-variable warnings in powerpc build
nilfs2: fix gcc unused-but-set-variable warnings
MAINTAINERS: nilfs2: add header file for tracing
nilfs2: add tracepoints for analyzing reading and writing metadata files
...
Like dma_unmap_sg, dma_sync_sg* should be called with the original number
of entries passed to dma_map_sg, so do the same check in the sync path as
we do in the unmap path.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a classical off-by-one error in case when we try to place, for
example, 1+1 bytes as hex in the buffer of size 6. The expected result is
to get an output truncated, but in the reality we get 6 bytes filed
followed by terminating NUL.
Change the logic how we fill the output in case of byte dumping into
limited space. This will follow the snprintf() behaviour by truncating
output even on half bytes.
Fixes: 114fc1afb2 (hexdump: make it return number of bytes placed in buffer)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change current_is_single_threaded() to use for_each_thread() rather than
deprecated while_each_thread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sometimes kobject_set_name_vargs is called with a format string conaining
no %, or a format string of precisely "%s", where the single vararg
happens to point to .rodata. kvasprintf_const detects these cases for us
and returns a copy of that pointer instead of duplicating the string, thus
saving some run-time memory. Otherwise, it falls back to kvasprintf. We
just need to always deallocate ->name using kfree_const.
Unfortunately, the dance we need to do to perform the '/' -> '!'
sanitization makes the resulting code rather ugly.
I instrumented kstrdup_const to provide some statistics on the memory
saved, and for me this gave an additional ~14KB after boot (306KB was
already saved; this patch bumped that to 320KB). I have
KMALLOC_SHIFT_LOW==3, and since 80% of the kvasprintf_const hits were
satisfied by an 8-byte allocation, the 14K would roughly be quadrupled
when KMALLOC_SHIFT_LOW==5. Whether these numbers are sufficient to
justify the ugliness I'll leave to others to decide.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds kvasprintf_const which tries to use kstrdup_const if possible:
If the format string contains no % characters, or if the format string is
exactly "%s", we delegate to kstrdup_const. Otherwise, we fall back to
kvasprintf.
Just as for kstrdup_const, the main motivation is to save memory by
reusing .rodata when possible.
The return value should be freed by kfree_const, just like for
kstrdup_const.
There is deliberately no kasprintf_const: In the vast majority of cases,
the format string argument is a literal, so one can determine statically
whether one could instead use kstrdup_const directly (which would also
require one to change all corresponding kfree calls to kfree_const).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
llist_del_first reads entry->next, but it did not acquire visibility over
the entry node. As the result it can get a stale value of entry->next
(e.g. NULL or whatever garbage was there before the appending thread
wrote correct value). And then commit that value as llist head with
cmpxchg. That will corrupt llist.
Note there is a control-dependency between read of head->first and read of
entry->next, but it does not make the code correct. Kernel memory model
unambiguously says: "A load-load control dependency requires a full read
memory barrier".
Use smp_load_acquire to acquire visibility over the entry node.
The data race was found with KernelThreadSanitizer (KTSAN).
Here is an example of KTSAN report:
ThreadSanitizer: data-race in llist_del_first
Read of size 1 by thread T389 (K2630, CPU0):
[<ffffffff8156b8a9>] llist_del_first+0x39/0x70 lib/llist.c:74
[< inlined >] tty_buffer_alloc drivers/tty/tty_buffer.c:181
[<ffffffff81664af4>] __tty_buffer_request_room+0xb4/0x250 drivers/tty/tty_buffer.c:292
[<ffffffff81664e6c>] tty_insert_flip_string_fixed_flag+0x6c/0x150 drivers/tty/tty_buffer.c:337
[< inlined >] tty_insert_flip_string include/linux/tty_flip.h:35
[<ffffffff81667422>] pty_write+0x72/0xc0 drivers/tty/pty.c:110
[< inlined >] process_output_block drivers/tty/n_tty.c:611
[<ffffffff8165c016>] n_tty_write+0x346/0x7f0 drivers/tty/n_tty.c:2401
[< inlined >] do_tty_write drivers/tty/tty_io.c:1159
[<ffffffff816568df>] tty_write+0x21f/0x3f0 drivers/tty/tty_io.c:1245
[<ffffffff8125f00f>] __vfs_write+0x5f/0x1f0 fs/read_write.c:489
[<ffffffff8125ff8f>] vfs_write+0xef/0x280 fs/read_write.c:538
[< inlined >] SYSC_write fs/read_write.c:585
[<ffffffff81261390>] SyS_write+0x70/0xe0 fs/read_write.c:577
[<ffffffff81ee862e>] entry_SYSCALL_64_fastpath+0x12/0x71 arch/x86/entry/entry_64.S:186
Previous write of size 8 by thread T226 (K761, CPU0):
[<ffffffff8156b832>] llist_add_batch+0x32/0x70 lib/llist.c:44 (discriminator 16)
[< inlined >] llist_add include/linux/llist.h:180
[<ffffffff816649fc>] tty_buffer_free+0x6c/0xb0 drivers/tty/tty_buffer.c:221
[<ffffffff816651e7>] flush_to_ldisc+0x107/0x300 drivers/tty/tty_buffer.c:514
[<ffffffff810b20ee>] process_one_work+0x47e/0x930 kernel/workqueue.c:2036
[<ffffffff810b2650>] worker_thread+0xb0/0x900 kernel/workqueue.c:2170
[<ffffffff810bbe20>] kthread+0x150/0x170 kernel/kthread.c:209
[<ffffffff81ee8a1f>] ret_from_fork+0x3f/0x70 arch/x86/entry/entry_64.S:526
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a couple of simple tests for string_get_size(). The last one will
hang the kernel without the 'lib/string_helpers.c: fix infinite loop in
string_get_size()' fix.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: James Bottomley <JBottomley@Odin.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
<linux/bitops.h> provides rol32() inline function, let's use already
predefined function instead of direct expression.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
%n is no longer just ignored; it results in early return from vsnprintf.
Also add a request to add test cases for future %p extensions.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a simple module for testing the kernel's printf facilities.
Previously, some %p extensions have caused a wrong return value in case
the entire output didn't fit and/or been unusable in kasprintf(). This
should help catch such issues. Also, it should help ensure that changes
to the formatting algorithms don't break anything.
I'm not sure if we have a struct dentry or struct file lying around at
boot time or if we can fake one, but most %p extensions should be
testable, as should the ordinary number and string formatting.
The nature of vararg functions means we can't use a more conventional
table-driven approach.
For now, this is mostly a skeleton; contributions are very
welcome. Some tests are/will be slightly annoying to write, since the
expected output depends on stuff like CONFIG_*, sizeof(long), runtime
values etc.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a quick
git grep -E '%[ +0#-]*#[ +0#-]*(\*|[0-9]+)?(\.(\*|[0-9]+)?)?p'
shows, nobody uses the # flag with %p. Should one try to do so, one
will be met with
warning: `#' flag used with `%p' gnu_printf format [-Wformat]
(POSIX and C99 both say "... For other conversion specifiers, the
behavior is undefined.". Obviously, the kernel can choose to define
the behaviour however it wants, but as long as gcc issues that
warning, users are unlikely to show up.)
Since default_width is effectively always 2*sizeof(void*), we can
simplify the prologue of pointer() and save a few instructions.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Martin Kletzander <mkletzan@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quoting from 2aa2f9e21e ("lib/vsprintf.c: improve sanity check in
vsnprintf()"):
On 64 bit, size may very well be huge even if bit 31 happens to be 0.
Somehow it doesn't feel right that one can pass a 5 GiB buffer but not a
3 GiB one. So cap at INT_MAX as was probably the intention all along.
This is also the made-up value passed by sprintf and vsprintf.
I should have seen this copy-pasted instance back then, but let's just
do it now.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Martin Kletzander <mkletzan@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we meet any invalid or unsupported format specifier, 'handling' it by
just printing it as a literal string is not safe: Presumably the format
string and the arguments passed gcc's type checking, but that means
something like sprintf(buf, "%n %pd", &intvar, dentry) would end up
interpreting &intvar as a struct dentry*.
When the offending specifier was %n it used to be at the end of the format
string, but we can't rely on that always being the case. Also, gcc
doesn't complain about some more or less exotic qualifiers (or 'length
modifiers' in posix-speak) such as 'j' or 'q', but being unrecognized by
the kernel's printf implementation, they'd be interpreted as unknown
specifiers, and the rest of arguments would be interpreted wrongly.
So let's complain about anything we don't understand, not just %n, and
stop pretending that we'd be able to make sense of the rest of the
format/arguments. If the offending specifier is in a printk() call we
unfortunately only get a "BUG: recent printk recursion!", but at least
direct users of the sprintf family will be caught.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Martin Kletzander <mkletzan@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move all pointer-formatting documentation to one place in the code and one
place in the documentation instead of keeping it in three places with
different level of completeness. Documentation/printk-formats.txt has
detailed information about each modifier, docstring above pointer() has
short descriptions of them (as that is the function dealing with %p) and
docstring above vsprintf() is removed as redundant. Both docstrings in
the code that were modified are updated with a reminder of updating the
documentation upon any further change.
[akpm@linux-foundation.org: fix comment]
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using kstrdup_const, thus reusing .rodata when possible, saves around 2 kB
of runtime memory on my laptop/.config combination.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__GFP_WAIT was used to signal that the caller was in atomic context and
could not sleep. Now it is possible to distinguish between true atomic
context and callers that are not willing to sleep. The latter should
clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing
__GFP_WAIT behaves differently, there is a risk that people will clear the
wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly
indicate what it does -- setting it allows all reclaim activity, clearing
them prevents it.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig
to clean up various abuses of headers in there. The patch to rename the
io-64-nonatomic-*.h headers caused some conflicts with new users, so I
added a workaround that we can remove in the next merge window.
The only other patch is a warning fix from Marek Vasut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dQKG
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"The asm-generic changes for 4.4 are mostly a series from Christoph
Hellwig to clean up various abuses of headers in there. The patch to
rename the io-64-nonatomic-*.h headers caused some conflicts with new
users, so I added a workaround that we can remove in the next merge
window.
The only other patch is a warning fix from Marek Vasut"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h
asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
gpio-mxc: stop including <asm-generic/bug>
n_tracesink: stop including <asm-generic/bug>
n_tracerouter: stop including <asm-generic/bug>
mlx5: stop including <asm-generic/kmap_types.h>
hifn_795x: stop including <asm-generic/kmap_types.h>
drbd: stop including <asm-generic/kmap_types.h>
move count_zeroes.h out of asm-generic
move io-64-nonatomic*.h out of asm-generic
Merge patch-bomb from Andrew Morton:
- inotify tweaks
- some ocfs2 updates (many more are awaiting review)
- various misc bits
- kernel/watchdog.c updates
- Some of mm. I have a huge number of MM patches this time and quite a
lot of it is quite difficult and much will be held over to next time.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
selftests: vm: add tests for lock on fault
mm: mlock: add mlock flags to enable VM_LOCKONFAULT usage
mm: introduce VM_LOCKONFAULT
mm: mlock: add new mlock system call
mm: mlock: refactor mlock, munlock, and munlockall code
kasan: always taint kernel on report
mm, slub, kasan: enable user tracking by default with KASAN=y
kasan: use IS_ALIGNED in memory_is_poisoned_8()
kasan: Fix a type conversion error
lib: test_kasan: add some testcases
kasan: update reference to kasan prototype repo
kasan: move KASAN_SANITIZE in arch/x86/boot/Makefile
kasan: various fixes in documentation
kasan: update log messages
kasan: accurately determine the type of the bad access
kasan: update reported bug types for kernel memory accesses
kasan: update reported bug types for not user nor kernel memory accesses
mm/kasan: prevent deadlock in kasan reporting
mm/kasan: don't use kasan shadow pointer in generic functions
mm/kasan: MODULE_VADDR is not available on all archs
...
It's recommended to have slub's user tracking enabled with CONFIG_KASAN,
because:
a) User tracking disables slab merging which improves
detecting out-of-bounds accesses.
b) User tracking metadata acts as redzone which also improves
detecting out-of-bounds accesses.
c) User tracking provides additional information about object.
This information helps to understand bugs.
Currently it is not enabled by default. Besides recompiling the kernel
with KASAN and reinstalling it, user also have to change the boot cmdline,
which is not very handy.
Enable slub user tracking by default with KASAN=y, since there is no good
reason to not do this.
[akpm@linux-foundation.org: little fixes, per David]
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add some out of bounds testcases to test_kasan module.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sparc updates from David Miller:
"Just a couple of fixes/cleanups:
- Correct NUMA latency calculations on sparc64, from Nitin Gupta.
- ASI_ST_BLKINIT_MRU_S value was wrong, from Rob Gardner.
- Fix non-faulting load handling of non-quad values, also from Rob
Gardner.
- Cleanup VISsave assembler, from Sam Ravnborg.
- Fix iommu-common code so it doesn't emit rediculous warnings on
some architectures, particularly ARM"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix numa distance values
sparc64: Don't restrict fp regs for no-fault loads
iommu-common: Fix error code used in iommu_tbl_range_{alloc,free}().
sparc64: use ENTRY/ENDPROC in VISsave
sparc64: Fix incorrect ASI_ST_BLKINIT_MRU_S value
Pull security subsystem update from James Morris:
"This is mostly maintenance updates across the subsystem, with a
notable update for TPM 2.0, and addition of Jarkko Sakkinen as a
maintainer of that"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits)
apparmor: clarify CRYPTO dependency
selinux: Use a kmem_cache for allocation struct file_security_struct
selinux: ioctl_has_perm should be static
selinux: use sprintf return value
selinux: use kstrdup() in security_get_bools()
selinux: use kmemdup in security_sid_to_context_core()
selinux: remove pointless cast in selinux_inode_setsecurity()
selinux: introduce security_context_str_to_sid
selinux: do not check open perm on ftruncate call
selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default
KEYS: Merge the type-specific data with the payload data
KEYS: Provide a script to extract a module signature
KEYS: Provide a script to extract the sys cert list from a vmlinux file
keys: Be more consistent in selection of union members used
certs: add .gitignore to stop git nagging about x509_certificate_list
KEYS: use kvfree() in add_key
Smack: limited capability for changing process label
TPM: remove unnecessary little endian conversion
vTPM: support little endian guests
char: Drop owner assignment from i2c_driver
...
Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of
debugfs updates, with a smattering of minor driver core fixes and
updates as well.
All have been in linux-next for a long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlY6ePQACgkQMUfUDdst+ymNTgCgpP0CZw57GpwF/Hp2L/lMkVeo
Kx8AoKhEi4iqD5fdCQS9qTfomB+2/M6g
=g7ZO
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch
of debugfs updates, with a smattering of minor driver core fixes and
updates as well.
All have been in linux-next for a long time"
* tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Add debugfs_create_ulong()
of: to support binding numa node to specified device in devicetree
debugfs: Add read-only/write-only bool file ops
debugfs: Add read-only/write-only size_t file ops
debugfs: Add read-only/write-only x64 file ops
debugfs: Consolidate file mode checks in debugfs_create_*()
Revert "mm: Check if section present during memory block (un)registering"
driver-core: platform: Provide helpers for multi-driver modules
mm: Check if section present during memory block (un)registering
devres: fix a for loop bounds check
CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit
base/platform: assert that dev_pm_domain callbacks are called unconditionally
sysfs: correctly handle short reads on PREALLOC attrs.
base: soc: siplify ida usage
kobject: move EXPORT_SYMBOL() macros next to corresponding definitions
kobject: explain what kobject's sd field is
debugfs: document that debugfs_remove*() accepts NULL and error values
debugfs: Pass bool pointer to debugfs_create_bool()
ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
When running "mod X" operation, if X is 0 the filter has to be halt.
Add new test cases to cover A = A mod X if X is 0, and A = A mod 1.
CC: Xi Wang <xi.wang@gmail.com>
CC: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Zi Shen Lim <zlim.lnx@gmail.com>
Acked-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value returned from iommu_tbl_range_alloc() (and the one passed
in as a fourth argument to iommu_tbl_range_free) is not a DMA address,
it is rather an index into the IOMMU page table.
Therefore using DMA_ERROR_CODE is not appropriate.
Use a more type matching error code define, IOMMU_ERROR_CODE, and
update all users of this interface.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
Pull crypto update from Herbert Xu:
"API:
- Add support for cipher output IVs in testmgr
- Add missing crypto_ahash_blocksize helper
- Mark authenc and des ciphers as not allowed under FIPS.
Algorithms:
- Add CRC support to 842 compression
- Add keywrap algorithm
- A number of changes to the akcipher interface:
+ Separate functions for setting public/private keys.
+ Use SG lists.
Drivers:
- Add Intel SHA Extension optimised SHA1 and SHA256
- Use dma_map_sg instead of custom functions in crypto drivers
- Add support for STM32 RNG
- Add support for ST RNG
- Add Device Tree support to exynos RNG driver
- Add support for mxs-dcp crypto device on MX6SL
- Add xts(aes) support to caam
- Add ctr(aes) and xts(aes) support to qat
- A large set of fixes from Russell King for the marvell/cesa driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits)
crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params()
crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used
hwrng: exynos - Add Device Tree support
hwrng: exynos - Fix missing configuration after suspend to RAM
hwrng: exynos - Add timeout for waiting on init done
dt-bindings: rng: Describe Exynos4 PRNG bindings
crypto: marvell/cesa - use __le32 for hardware descriptors
crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op()
crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio()
crypto: marvell/cesa - use gfp_t for gfp flags
crypto: marvell/cesa - use dma_addr_t for cur_dma
crypto: marvell/cesa - use readl_relaxed()/writel_relaxed()
crypto: caam - fix indentation of close braces
crypto: caam - only export the state we really need to export
crypto: caam - fix non-block aligned hash calculation
crypto: caam - avoid needlessly saving and restoring caam_hash_ctx
crypto: caam - print errno code when hash registration fails
crypto: marvell/cesa - fix memory leak
crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req()
crypto: marvell/cesa - rearrange handling for sw padded hashes
...
Pull ARM updates from Russell King:
"In this ARM merge, we remove more lines than we add. Changes include:
- Enable imprecise aborts early, so that bus errors aren't masked
until later in the boot. This has the side effect that boot
loaders which provoke these aborts can cause the kernel to crash
early in boot, so we install a handler to report this event around
the site where these are enabled.
- Remove the buggy but impossible to enable cmpxchg syscall code.
- Add unwinding annotations to some assembly code.
- Add support for atomic half-word exchange for ARMv6k+.
- Reduce ioremap() alignment for SMP/LPAE cases where we don't need
the large alignment.
- Addition of an "optimal" 3G configuration for systems with 1G of
RAM.
- Increase vmalloc space by 128M.
- Constify some SMP operations structures, which have never been
writable.
- Improve ARMs dma_mmap() support for mapping DMA coherent mappings
into userspace.
- Fix to the NMI backtrace code in the IPI case on ARM where the
failing CPU gets stuck for 10s waiting for its own IPI to be
delivered.
- Removal of legacy PM support from the AMBA bus driver.
- Another fix for the previous fix of vdsomunge"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (23 commits)
ARM: 8449/1: fix bug in vdsomunge swab32 macro
arm: add missing of_node_put
ARM: 8447/1: catch pending imprecise abort on unmask
ARM: 8446/1: amba: Remove unused callbacks for legacy system PM
ARM: 8443/1: Adding support for atomic half word exchange
ARM: clean up TWD after previous patch
ARM: 8441/2: twd: Don't set CLOCK_EVT_FEAT_C3STOP unconditionally
ARM: 8440/1: remove obsolete documentation
ARM: make highpte an expert option
ARM: 8433/1: add a VMSPLIT_3G_OPT config option
ARM: 8439/1: Fix backtrace generation when IPI is masked
ARM: 8428/1: kgdb: Fix registers on sleeping tasks
ARM: 8427/1: dma-mapping: add support for offset parameter in dma_mmap()
ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()
ARM: remove user cmpxchg syscall
ARM: 8438/1: Add unwinding to __clear_user_std()
ARM: 8436/1: hw_breakpoint: remove unnecessary header
ARM: 8434/2: Revert "7655/1: smp_twd: make twd_local_timer_of_register() no-op for nosmp"
ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000
ARM: 8430/1: use default ioremap alignment for SMP or LPAE
...
When the kernel compiled with KASAN=y, GCC adds redzones for each
variable on stack. This enlarges function's stack frame and causes:
'warning: the frame size of X bytes is larger than Y bytes'
The worst case I've seen for now is following:
../net/wireless/nl80211.c: In function `nl80211_send_wiphy':
../net/wireless/nl80211.c:1731:1: warning: the frame size of 5448 bytes is larger than 2048 bytes [-Wframe-larger-than=]
That kind of warning becomes useless with KASAN=y. It doesn't
necessarily indicate that there is some problem in the code, thus we
should turn it off.
(The KASAN=y stack size in increased from 16k to 32k for this reason)
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch fixes the analysis of the input data which contains an off
by one.
The issue is visible when the SGL contains one byte per SG entry.
The code for checking for zero bytes does not operate on the data byte.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Conflicts:
drivers/net/usb/asix_common.c
net/ipv4/inet_connection_sock.c
net/switchdev/switchdev.c
In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.
The other two conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
lib/built-in.o: In function `__bitrev32':
deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table'
Anything which uses bitrevX() has to select BITREVERSE, to grab
lib/bitrev.o.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This header contains a few helpers currenly only used by the mpi
implementation, and not default implementation of architecture code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds CRC generation and validation support for nx-842.
Add CRC flag so that nx842 coprocessor includes CRC during compression
and validates during decompression.
Also changes in 842 SW compression to append CRC value at the end
of template and checks during decompression.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add mpi_read_raw_from_sgl and mpi_write_to_sgl helpers.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a prandom_init_once() facility that works on the rnd_state, so that
users that are keeping their own state independent from prandom_u32() can
initialize their taus113 per cpu states.
The motivation here is similar to net_get_random_once(): initialize the
state as late as possible in the hope that enough entropy has been
collected for the seeding. prandom_init_once() makes use of the recently
introduced prandom_seed_full_state() helper and is generic enough so that
it could also be used on fast-paths due to the DO_ONCE().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out the full reseed handling code that populates the state
through get_random_bytes() and runs prandom_warmup(). The resulting
prandom_seed_full_state() will be used later on in more than the
current __prandom_reseed() user. Fix also two minor whitespace
issues along the way.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the get_random_once() helper generic enough, so that functions
in general would only be called once, where one user of this is then
net_get_random_once().
The only implementation specific call is to get_random_bytes(), all
the rest of this *_once() facility would be duplicated among different
subsystems otherwise. The new DO_ONCE() helper will be used by prandom()
later on, but might also be useful for other scenarios/subsystems as
well where a one-time initialization in often-called, possibly fast
path code could occur.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no good reason why users outside of networking should not
be using this facility, f.e. for initializing their seeds.
Therefore, make it accessible from there as get_random_once().
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's possible that the destination can be shadowed in userspace
(as, for example, the perf buffers are now). So we should take
care not to leak data that could be inspected by userspace.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
The section mismatch warning can be easy to miss during the kernel build
process. Allow it to be marked as fatal to be easily caught and prevent
bugs from slipping in.
Setting CONFIG_SECTION_MISMATCH_WARN_ONLY=y causes these warnings to be
non-fatal, since there are a number of section mismatches when using
allmodconfig on some architectures, and we do not want to break these
builds by default.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Change-Id: Ic346706e3297c9f0d790e3552aa94e5cff9897a6
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The iomap[] array has PCIM_IOMAP_MAX (6) elements and not
DEVICE_COUNT_RESOURCE (16). This bug was found using a static checker.
It may be that the "if (!(mask & (1 << i)))" check means we never
actually go past the end of the array in real life.
Fixes: ec04b07584 ('iomap: implement pcim_iounmap_regions()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull strscpy string copy function implementation from Chris Metcalf.
Chris sent this during the merge window, but I waffled back and forth on
the pull request, which is why it's going in only now.
The new "strscpy()" function is definitely easier to use and more secure
than either strncpy() or strlcpy(), both of which are horrible nasty
interfaces that have serious and irredeemable problems.
strncpy() has a useless return value, and doesn't NUL-terminate an
overlong result. To make matters worse, it pads a short result with
zeroes, which is a performance disaster if you have big buffers.
strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking
the insane NUL padding, but having a differently broken return value
which returns the original length of the source string. Which means
that it will read characters past the count from the source buffer, and
you have to trust the source to be properly terminated. It also makes
error handling fragile, since the test for overflow is unnecessarily
subtle.
strscpy() avoids both these problems, guaranteeing the NUL termination
(but not excessive padding) if the destination size wasn't zero, and
making the overflow condition very obvious by returning -E2BIG. It also
doesn't read past the size of the source, and can thus be used for
untrusted source data too.
So why did I waffle about this for so long?
Every time we introduce a new-and-improved interface, people start doing
these interminable series of trivial conversion patches.
And every time that happens, somebody does some silly mistake, and the
conversion patch to the improved interface actually makes things worse.
Because the patch is mindnumbing and trivial, nobody has the attention
span to look at it carefully, and it's usually done over large swatches
of source code which means that not every conversion gets tested.
So I'm pulling the strscpy() support because it *is* a better interface.
But I will refuse to pull mindless conversion patches. Use this in
places where it makes sense, but don't do trivial patches to fix things
that aren't actually known to be broken.
* 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: use global strscpy() rather than private copy
string: provide strscpy()
Make asm/word-at-a-time.h available on all architectures
Move EXPORT_SYMBOL() macros in kobject.c from the end of the file
next to the function definitions to which they belong.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument,
when all it needs is a boolean pointer.
It would be better to update this API to make it accept 'bool *'
instead, as that will make it more consistent and often more convenient.
Over that bool takes just a byte.
That required updates to all user sites as well, in the same commit
updating the API. regmap core was also using
debugfs_{read|write}_file_bool(), directly and variable types were
updated for that to be bool as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently on ARM when <SysRq-L> is triggered from an interrupt handler
(e.g. a SysRq issued using UART or kbd) the main CPU will wedge for ten
seconds with interrupts masked before issuing a backtrace for every CPU
except itself.
The new backtrace code introduced by commit 96f0e00378 ("ARM: add
basic support for on-demand backtrace of other CPUs") does not work
correctly when run from an interrupt handler because IPI_CPU_BACKTRACE
is used to generate the backtrace on all CPUs but cannot preempt the
current calling context.
This can be fixed by detecting that the calling context cannot be
preempted and issuing the backtrace directly in this case. Issuing
directly leaves us without any pt_regs to pass to nmi_cpu_backtrace()
so we also modify the generic code to call dump_stack() when its
argument is NULL.
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull networking fixes from David Miller:
1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs
instead of cloning them. From Daniel Borkmann.
2) When converting classical BPF into eBPF, fix the setting of the
source reg to BPF_REG_X. From Tycho Andersen.
3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from
Linus Lussing.
4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau.
5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from
Roopa Prabhu.
6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai.
7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from
Florian Westphal.
8) Check DMA mapping errors in bna driver, from Ivan Vecera.
9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context,
misclearing of interrupt status in TX timeout handler, etc.) from
David Woodhouse.
10) In tipc, reset SKB header pointer after skb_linearize(), from Erik
Hugne.
11) Fix autobind races et al. in netlink code, from Herbert Xu with
help from Tejun Heo and others.
12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan.
13) Fix various races in timewait timer and reqsk_queue_hadh_req, from
Eric Dumazet.
14) Fix array overruns in mac80211, from Johannes Berg and Dan
Carpenter.
15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov.
16) Fix race between poll_one_napi and napi_disable, from Neil Horman.
17) Fix byte order in geneve tunnel port config, from John W Linville.
18) Fix handling of ARP replies over lightweight tunnels, from Jiri
Benc.
19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson
Kok and Roopa Prabhu.
20) Several reference count handling bug fixes in the PHY/MDIO layer
from Russel King.
21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault.
22) Fix crash in icmp_route_lookup(), from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net: Fix panic in icmp_route_lookup
net: update docbook comment for __mdiobus_register()
ppp: fix lockdep splat in ppp_dev_uninit()
net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected
phy: marvell: add link partner advertised modes
net: fix net_device refcounting
phy: add phy_device_remove()
phy: fixed-phy: properly validate phy in fixed_phy_update_state()
net: fix phy refcounting in a bunch of drivers
of_mdio: fix MDIO phy device refcounting
phy: add proper phy struct device refcounting
phy: fix mdiobus module safety
net: dsa: fix of_mdio_find_bus() device refcount leak
phy: fix of_mdio_find_bus() device refcount leak
ip6_tunnel: Reduce log level in ip6_tnl_err() to debug
ip6_gre: Reduce log level in ip6gre_err() to debug
fib_rules: fix fib rule dumps across multiple skbs
bnx2x: byte swap rss_key to comply to Toeplitz specs
net: revert "net_sched: move tp->root allocation into fw_init()"
lwtunnel: remove source and destination UDP port config option
...
rhashtable_rehash_one() uses complex logic to update entry->next field,
after INIT_RHT_NULLS_HEAD and NULLS_MARKER expansion:
entry->next = 1 | ((base + off) << 1)
This can be compiled along the lines of:
entry->next = base + off
entry->next <<= 1
entry->next |= 1
Which will break concurrent readers.
NULLS value recomputation is not needed here, so just remove
the complex logic.
The data race was found with KernelThreadSanitizer (KTSAN).
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for invoking iommu->lazy_flush() from iommu_tbl_range_alloc()
has to be refactored so that we only call ->lazy_flush() if it is
non-null.
I had a sparc kernel that was crashing when I was trying to process some
very large perf.data files- the crash happens when the scsi driver calls
into dma_4v_map_sg and thus the iommu_tbl_range_alloc().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some string_get_size() calls (e.g.:
string_get_size(1, 512, STRING_UNITS_10, ..., ...)
string_get_size(15, 64, STRING_UNITS_10, ..., ...)
) result in an infinite loop. The problem is that if size is equal to
divisor[units]/blk_size and is smaller than divisor[units] we'll end
up with size == 0 when we start doing sf_cap calculations:
For string_get_size(1, 512, STRING_UNITS_10, ..., ...) case:
...
remainder = do_div(size, divisor[units]); -> size is 0, remainder is 1
remainder *= blk_size; -> remainder is 512
...
size *= blk_size; -> size is still 0
size += remainder / divisor[units]; -> size is still 0
The caller causing the issue is sd_read_capacity(), the problem was
noticed on Hyper-V, such weird size was reported by host when scanning
collides with device removal. This is probably a separate issue worth
fixing, this patch is intended to prevent the library routine from
infinite looping.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: James Bottomley <JBottomley@Odin.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove bi_reverse() and use generic bitrev32() instead - it should have
better performance on some platforms.
Signed-off-by: yalin wang <yalin.wang2010@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compare pointer-typed values to NULL rather than 0.
The semantic patch that makes this change is available
in scripts/coccinelle/null/badzero.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When loading x86 64bit kernel above 4GiB with patched grub2, got kernel
gunzip error.
| early console in decompress_kernel
| decompress_kernel:
| input: [0x807f2143b4-0x807ff61aee]
| output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len
| boot via startup_64
| KASLR using RDTSC...
| new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size
| decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee]
|
| Decompressing Linux... gz...
|
| uncompression error
|
| -- System halted
the new buffer is at 0x46fe000000ULL, decompressor_gzip is using
0xffffffb901ffffff as out_len. gunzip in lib/zlib_inflate/inflate.c cap
that len to 0x01ffffff and decompress fails later.
We could hit this problem with crashkernel booting that uses kexec loading
kernel above 4GiB.
We have decompress_* support:
1. inbuf[]/outbuf[] for kernel preboot.
2. inbuf[]/flush() for initramfs
3. fill()/flush() for initrd.
This bug only affect kernel preboot path that use outbuf[].
Add __decompress and take real out_buf_len for gunzip instead of guessing
wrong buf size.
Fixes: 1431574a1c (lib/decompressors: fix "no limit" output buffer length)
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In kmalloc_oob_krealloc_less, I think it is better to test
the size2 boundary.
If we do not call krealloc, the access of position size1 will still cause
out-of-bounds and access of position size2 does not. After call krealloc,
the access of position size2 cause out-of-bounds. So using size2 is more
correct.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To further clarify the purpose of the "esc" argument, rename it to "only"
to reflect that it is a limit, not a list of additional characters to
escape.
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The esc argument is used to reduce which characters will be escaped. For
example, using " " with ESCAPE_SPACE will not produce any escaped spaces.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __bitmap_parselist we can accept whitespaces on head or tail during
every parsing procedure. If input has valid ranges, there is no reason to
reject the user.
For example, bitmap_parselist(" 1-3, 5, ", &mask, nmaskbits). After
separating the string, we get " 1-3", " 5", and " ". It's possible and
reasonable to accept such string as long as the parsing result is correct.
Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If string end with '-', for exapmle, bitmap_parselist("1,0-",&mask,
nmaskbits), It is not in a valid pattern, so add a check after loop.
Return -EINVAL on such condition.
Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can avoid in-loop incrementation of ndigits. Save current totaldigits
to ndigits before loop, and check ndigits against totaldigits after the
loop.
Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
strtol(3) et al accept "-0", so should we.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The strscpy() API is intended to be used instead of strlcpy(),
and instead of most uses of strncpy().
- Unlike strlcpy(), it doesn't read from memory beyond (src + size).
- Unlike strlcpy() or strncpy(), the API provides an easy way to check
for destination buffer overflow: an -E2BIG error return value.
- The provided implementation is robust in the face of the source
buffer being asynchronously changed during the copy, unlike the
current implementation of strlcpy().
- Unlike strncpy(), the destination buffer will be NUL-terminated
if the string in the source buffer is too long.
- Also unlike strncpy(), the destination buffer will not be updated
beyond the NUL termination, avoiding strncpy's behavior of zeroing
the entire tail end of the destination buffer. (A memset() after
the strscpy() can be used if this behavior is desired.)
- The implementation should be reasonably performant on all
platforms since it uses the asm/word-at-a-time.h API rather than
simple byte copy. Kernel-to-kernel string copy is not considered
to be performance critical in any case.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Merge second patch-bomb from Andrew Morton:
"Almost all of the rest of MM. There was an unusually large amount of
MM material this time"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
zpool: remove no-op module init/exit
mm: zbud: constify the zbud_ops
mm: zpool: constify the zpool_ops
mm: swap: zswap: maybe_preload & refactoring
zram: unify error reporting
zsmalloc: remove null check from destroy_handle_cache()
zsmalloc: do not take class lock in zs_shrinker_count()
zsmalloc: use class->pages_per_zspage
zsmalloc: consider ZS_ALMOST_FULL as migrate source
zsmalloc: partial page ordering within a fullness_list
zsmalloc: use shrinker to trigger auto-compaction
zsmalloc: account the number of compacted pages
zsmalloc/zram: introduce zs_pool_stats api
zsmalloc: cosmetic compaction code adjustments
zsmalloc: introduce zs_can_compact() function
zsmalloc: always keep per-class stats
zsmalloc: drop unused variable `nr_to_migrate'
mm/memblock.c: fix comment in __next_mem_range()
mm/page_alloc.c: fix type information of memoryless node
memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node()
...
CMA reserved memory is not part of total reserved memory. Currently
when we print the total reserve memory it considers cma as part of
reserve memory and do minus of totalcma_pages from reserved, which is
wrong. In cases where total reserved is less than cma reserved we will
get negative values & while printing we print as unsigned and we will
get a very large value.
Below is the show mem output on X86 ubuntu based system where CMA
reserved is 100MB (25600 pages) & total reserved is ~40MB(10316 pages).
And reserve memory shows a large value because of this bug.
Before:
[ 127.066430] 898908 pages RAM
[ 127.066432] 671682 pages HighMem/MovableOnly
[ 127.066434] 4294952012 pages reserved
[ 127.066436] 25600 pages cma reserved
After:
[ 44.663129] 898908 pages RAM
[ 44.663130] 671682 pages HighMem/MovableOnly
[ 44.663130] 10316 pages reserved
[ 44.663131] 25600 pages cma reserved
Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Danesh Petigara <dpetigara@broadcom.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map. This facility is used by the pmem driver to
enable pfn_to_page() operations on the page frames returned by DAX
('direct_access' in 'struct block_device_operations'). For now, the
'memmap' allocation for these "device" pages comes from "System
RAM". Support for allocating the memmap from device memory will
arrive in a later kernel.
2/ Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3. Completion of
the conversion is targeted for v4.4.
3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
5/ Miscellaneous updates and fixes to libnvdimm including support
for issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o57/
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This update has successfully completed a 0day-kbuild run and has
appeared in a linux-next release. The changes outside of the typical
drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
the introduction of ZONE_DEVICE + devm_memremap_pages().
Summary:
- Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map.
This facility is used by the pmem driver to enable pfn_to_page()
operations on the page frames returned by DAX ('direct_access' in
'struct block_device_operations').
For now, the 'memmap' allocation for these "device" pages comes
from "System RAM". Support for allocating the memmap from device
memory will arrive in a later kernel.
- Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3.
Completion of the conversion is targeted for v4.4.
- Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
- Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
- Miscellaneous updates and fixes to libnvdimm including support for
issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes"
* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
libnvdimm, pmem: direct map legacy pmem by default
libnvdimm, pmem: 'struct page' for pmem
libnvdimm, pfn: 'struct page' provider infrastructure
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
add devm_memremap_pages
mm: ZONE_DEVICE for "device memory"
mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
dax: drop size parameter to ->direct_access()
nd_blk: change aperture mapping from WC to WB
nvdimm: change to use generic kvfree()
pmem, dax: have direct_access use __pmem annotation
dax: update I/O path to do proper PMEM flushing
pmem: add copy_from_iter_pmem() and clear_pmem()
pmem, x86: clean up conditional pmem includes
pmem: remove layer when calling arch_has_wmb_pmem()
pmem, x86: move x86 PMEM API to new pmem.h header
libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
pmem: switch to devm_ allocations
devres: add devm_memremap
libnvdimm, btt: write and validate parent_uuid
...
Pull security subsystem updates from James Morris:
"Highlights:
- PKCS#7 support added to support signed kexec, also utilized for
module signing. See comments in 3f1e1bea.
** NOTE: this requires linking against the OpenSSL library, which
must be installed, e.g. the openssl-devel on Fedora **
- Smack
- add IPv6 host labeling; ignore labels on kernel threads
- support smack labeling mounts which use binary mount data
- SELinux:
- add ioctl whitelisting (see
http://kernsec.org/files/lss2015/vanderstoep.pdf)
- fix mprotect PROT_EXEC regression caused by mm change
- Seccomp:
- add ptrace options for suspend/resume"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits)
PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Documentation/Changes: Now need OpenSSL devel packages for module signing
scripts: add extract-cert and sign-file to .gitignore
modsign: Handle signing key in source tree
modsign: Use if_changed rule for extracting cert from module signing key
Move certificate handling to its own directory
sign-file: Fix warning about BIO_reset() return value
PKCS#7: Add MODULE_LICENSE() to test module
Smack - Fix build error with bringup unconfigured
sign-file: Document dependency on OpenSSL devel libraries
PKCS#7: Appropriately restrict authenticated attributes and content type
KEYS: Add a name for PKEY_ID_PKCS7
PKCS#7: Improve and export the X.509 ASN.1 time object decoder
modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS
extract-cert: Cope with multiple X.509 certificates in a single file
sign-file: Generate CMS message as signature instead of PKCS#7
PKCS#7: Support CMS messages also [RFC5652]
X.509: Change recorded SKID & AKID to not include Subject or Issuer
PKCS#7: Check content type and versions
MAINTAINERS: The keyrings mailing list has moved
...
Pull NMI backtrace update from Russell King:
"These changes convert the x86 NMI handling to be a library
implementation which other architectures can make use of. Thomas
Gleixner has reviewed and tested these changes, and wishes me to send
these rather than taking them through the tip tree.
The final patch in the set adds an initial implementation using this
infrastructure to ARM, even though it doesn't send the IPI at "NMI"
level. Patches are in progress to add the ARM equivalent of NMI, but
we still need the IRQ-level fallback for systems where the "NMI" isn't
available due to secure firmware denying access to it"
* 'nmi' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: add basic support for on-demand backtrace of other CPUs
nmi: x86: convert to generic nmi handler
nmi: create generic NMI backtrace implementation
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
- An assortment of little fixes, several for minor races only likely
to be hit during testing
- further cluster-md-raid1 development, not ready for real use yet.
- new RAID6 syndrome code for ARM NEON
- fix a race where a write can return before failure of one device
is properly recorded in metadata, so an immediate crash might result
in that write being lost.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n+/k
-----END PGP SIGNATURE-----
Merge tag 'md/4.3' of git://neil.brown.name/md
Pull md updates from Neil Brown:
- an assortment of little fixes, several for minor races only likely to
be hit during testing
- further cluster-md-raid1 development, not ready for real use yet.
- new RAID6 syndrome code for ARM NEON
- fix a race where a write can return before failure of one device is
properly recorded in metadata, so an immediate crash might result in
that write being lost.
* tag 'md/4.3' of git://neil.brown.name/md: (33 commits)
md/raid5: ensure device failure recorded before write request returns.
md/raid5: use bio_list for the list of bios to return.
md/raid10: ensure device failure recorded before write request returns.
md/raid1: ensure device failure recorded before write request returns.
md-cluster: remove inappropriate try_module_get from join()
md: extend spinlock protection in register_md_cluster_operations
md-cluster: Read the disk bitmap sb and check if it needs recovery
md-cluster: only call complete(&cinfo->completion) when node join cluster
md-cluster: add missed lockres_free
md-cluster: remove the unused sb_lock
md-cluster: init suspend_list and suspend_lock early in join
md-cluster: add the error check if failed to get dlm lock
md-cluster: init completion within lockres_init
md-cluster: fix deadlock issue on message lock
md-cluster: transfer the resync ownership to another node
md-cluster: split recover_slot for future code reuse
md-cluster: use %pU to print UUIDs
md: setup safemode_timer before it's being used
md/raid5: handle possible race as reshape completes.
md: sync sync_completed has correct value as recovery finishes.
...
This change fills devm_gen_pool_create()/gen_pool_get() "name" argument
stub with contents and extends of_gen_pool_get() functionality on this
basis.
If there is no associated platform device with a device node passed to
of_gen_pool_get(), the function attempts to get a label property or device
node name (= repeats MTD OF partition standard) and seeks for a named
gen_pool registered by device of the parent device node.
The main idea of the change is to allow registration of independent
gen_pools under the same umbrella device, say "partitions" on "storage
device", the original functionality of one "partition" per "storage
device" is untouched.
[akpm@linux-foundation.org: fix constness in devres_find()]
[dan.carpenter@oracle.com: freeing const data pointers]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change modifies gen_pool_get() and devm_gen_pool_create() client
interfaces adding one more argument "name" of a gen_pool object.
Due to implementation gen_pool_get() is capable to retrieve only one
gen_pool associated with a device even if multiple gen_pools are created,
fortunately right at the moment it is sufficient for the clients, hence
provide NULL as a valid argument on both producer devm_gen_pool_create()
and consumer gen_pool_get() sides.
Because only one created gen_pool per device is addressable, explicitly
add a restriction to devm_gen_pool_create() to create only one gen_pool
per device, this implies two possible error codes returned by the
function, account it on client side (only misc/sram). This completes
client side changes related to genalloc updates.
[akpm@linux-foundation.org: gen_pool_get() cleanup]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull locking and atomic updates from Ingo Molnar:
"Main changes in this cycle are:
- Extend atomic primitives with coherent logic op primitives
(atomic_{or,and,xor}()) and deprecate the old partial APIs
(atomic_{set,clear}_mask())
The old ops were incoherent with incompatible signatures across
architectures and with incomplete support. Now every architecture
supports the primitives consistently (by Peter Zijlstra)
- Generic support for 'relaxed atomics':
- _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
- atomic_read_acquire()
- atomic_set_release()
This came out of porting qwrlock code to arm64 (by Will Deacon)
- Clean up the fragile static_key APIs that were causing repeat bugs,
by introducing a new one:
DEFINE_STATIC_KEY_TRUE(name);
DEFINE_STATIC_KEY_FALSE(name);
which define a key of different types with an initial true/false
value.
Then allow:
static_branch_likely()
static_branch_unlikely()
to take a key of either type and emit the right instruction for the
case. To be able to know the 'type' of the static key we encode it
in the jump entry (by Peter Zijlstra)
- Static key self-tests (by Jason Baron)
- qrwlock optimizations (by Waiman Long)
- small futex enhancements (by Davidlohr Bueso)
- ... and misc other changes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
jump_label/x86: Work around asm build bug on older/backported GCCs
locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
locking/static_keys: Make verify_keys() static
jump label, locking/static_keys: Update docs
locking/static_keys: Provide a selftest
jump_label: Provide a self-test
s390/uaccess, locking/static_keys: employ static_branch_likely()
x86, tsc, locking/static_keys: Employ static_branch_likely()
locking/static_keys: Add selftest
locking/static_keys: Add a new static_key interface
locking/static_keys: Rework update logic
locking/static_keys: Add static_key_{en,dis}able() helpers
...
Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?
1) Add conntrack support to openvswitch, from Joe Stringer.
2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.
3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.
4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.
5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.
6) Document the DSA layer, from Florian Fainelli.
7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.
8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.
9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.
10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.
11) Support fragmented SKBs in iwlwifi, from Johannes Berg.
12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.
13) Add BQL support to 3c59x driver, from Loganaden Velvindron.
14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.
15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.
16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.
17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...
Pull SG updates from Jens Axboe:
"This contains a set of scatter-gather related changes/fixes for 4.3:
- Add support for limited chaining of sg tables even for
architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph.
- Add sg chain support to target_rd. From Christoph.
- Fixup open coded sg->page_link in crypto/omap-sham. From
Christoph.
- Fixup open coded crypto ->page_link manipulation. From Dan.
- Also from Dan, automated fixup of manual sg_unmark_end()
manipulations.
- Also from Dan, automated fixup of open coded sg_phys()
implementations.
- From Robert Jarzmik, addition of an sg table splitting helper that
drivers can use"
* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
lib: scatterlist: add sg splitting function
scatterlist: use sg_phys()
crypto/omap-sham: remove an open coded access to ->page_link
scatterlist: remove open coded sg_unmark_end instances
crypto: replace scatterwalk_sg_chain with sg_chain
target/rd: always chain S/G list
scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore,
Lv Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to
AML method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool
to be built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future
introduction of CPPC support and ACPI PCC mailbox driver
updates (Ashwin Chaugule).
- ACPI interrupts enumeration fix for a regression related
to the handling of IRQ attribute conflicts between MADT
and the ACPI namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael
J Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups
(Pan Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it
to preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support
for them in the OPP framework and in the cpufreq-dt driver plus
related OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=fTgI
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"From the number of commits perspective, the biggest items are ACPICA
and cpufreq changes with the latter taking the lead (over 50 commits).
On the cpufreq front, there are many cleanups and minor fixes in the
core and governors, driver updates etc. We also have a new cpufreq
driver for Mediatek MT8173 chips.
ACPICA mostly updates its debug infrastructure and adds a number of
fixes and cleanups for a good measure.
The Operating Performance Points (OPP) framework is updated with new
DT bindings and support for them among other things.
We have a few updates of the generic power domains framework and a
reorganization of the ACPI device enumeration code and bus type
operations.
And a lot of fixes and cleanups all over.
Included is one branch from the MFD tree as it contains some
PM-related driver core and ACPI PM changes a few other commits are
based on.
Specifics:
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to AML
method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool to be
built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future introduction
of CPPC support and ACPI PCC mailbox driver updates (Ashwin
Chaugule).
- ACPI interrupts enumeration fix for a regression related to the
handling of IRQ attribute conflicts between MADT and the ACPI
namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael J
Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it to
preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support for
them in the OPP framework and in the cpufreq-dt driver plus related
OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu)"
* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
cpufreq: speedstep-lib: Use monotonic clock
cpufreq: powernv: Increase the verbosity of OCC console messages
cpufreq: sfi: use kmemdup rather than duplicating its implementation
cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
cpufreq: remove redundant 'policy' field from user_policy
cpufreq: remove redundant 'governor' field from user_policy
cpufreq: update user_policy.* on success
cpufreq: use memcpy() to copy policy
cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
cpufreq: mediatek: Add MT8173 cpufreq driver
dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
PM / Domains: Fix typo in description of genpd_dev_pm_detach()
PM / Domains: Remove unusable governor dummies
PM / Domains: Make pm_genpd_init() available to modules
PM / domains: Align column headers and data in pm_genpd_summary output
powercap / RAPL: disable the 2nd power limit properly
tools: cpupower: Fix error when running cpupower monitor
PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
PM / OPP: Fix static checker warning (broken 64bit big endian systems)
...
Pull x86 mm updates from Ingo Molnar:
"The dominant change in this cycle was the continued work to isolate
kernel drivers from MTRR legacies: this tree gets rid of all kernel
internal driver interfaces to MTRRs (mostly by rewriting it to proper
PAT interfaces), the only access left is the /proc/mtrr ABI.
This work was done by Luis R Rodriguez.
There's also some related PCI interface additions for which I've
Cc:-ed Bjorn"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mm/mtrr: Remove kernel internal MTRR interfaces: unexport mtrr_add() and mtrr_del()
s390/io: Add pci_iomap_wc() and pci_iomap_wc_range()
drivers/dma/iop-adma: Use dma_alloc_writecombine() kernel-style
drivers/video/fbdev/vt8623fb: Use arch_phys_wc_add() and pci_iomap_wc()
drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc()
drivers/video/fbdev/arkfb.c: Use arch_phys_wc_add() and pci_iomap_wc()
PCI: Add pci_iomap_wc() variants
drivers/video/fbdev/gxt4500: Use pci_ioremap_wc_bar() to map framebuffer
drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar()
drivers/video/fbdev/i740fb: Use arch_phys_wc_add() and pci_ioremap_wc_bar()
PCI: Add pci_ioremap_wc_bar()
x86/mm: Make kernel/check.c explicitly non-modular
x86/mm/pat: Make mm/pageattr[-test].c explicitly non-modular
x86/mm/pat: Add comments to cachemode translation tables
arch/*/io.h: Add ioremap_uc() to all architectures
drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc()
drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC
drivers/video/fbdev/atyfb: Clarify ioremap() base and length used
drivers/video/fbdev/atyfb: Carve out framebuffer length fudging into a helper
x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default
...
* acpi-pm:
ACPI / bus: Move duplicate code to a separate new function
mfd: Add support for Intel Sunrisepoint LPSS devices
dmaengine: add a driver for Intel integrated DMA 64-bit
mfd: make mfd_remove_devices() iterate in reverse order
driver core: implement device_for_each_child_reverse()
klist: implement klist_prev()
Driver core: wakeup the parent device before trying probe
ACPI / PM: Attach ACPI power domain only once
PM / QoS: Make it possible to expose device latency tolerance to userspace
ACPI / PM: Update the copyright notice and description of power.c
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- the combination of tree geometry-initialization simplifications and
OS-jitter-reduction changes to expedited grace periods. These two
are stacked due to the large number of conflicts that would
otherwise result.
- privatize smp_mb__after_unlock_lock().
This commit moves the definition of smp_mb__after_unlock_lock() to
kernel/rcu/tree.h, in recognition of the fact that RCU is the only
thing using this, that nothing else is likely to use it, and that
it is likely to go away completely.
- documentation updates.
- torture-test updates.
- misc fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcu,locking: Privatize smp_mb__after_unlock_lock()
rcu: Silence lockdep false positive for expedited grace periods
rcu: Don't disable CPU hotplug during OOM notifiers
scripts: Make checkpatch.pl warn on expedited RCU grace periods
rcu: Update MAINTAINERS entry
rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
rcu: Make rcu_is_watching() really notrace
cpu: Wait for RCU grace periods concurrently
rcu: Create a synchronize_rcu_mult()
rcu: Fix obsolete priority-boosting comment
rcu: Use WRITE_ONCE in RCU_INIT_POINTER
rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
rcu: Add RCU-sched flavors of get-state and cond-sync
rcu: Add fastpath bypassing funnel locking
rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
rcu: Pull out wait_event*() condition into helper function
documentation: Describe new expedited stall warnings
rcu: Add stall warnings to synchronize_sched_expedited()
...