Florian Fainelli b21ee34259 net: dsa: Do not override PHY interface if already configured ... [ Upstream commit 211c504a44 ] In case we need to divert reads/writes using the slave MII bus, we may have already fetched a valid PHY interface property from Device Tree, and that mode is used by the PHY driver to make configuration decisions. If we could not fetch the "phy-mode" property, we will assign p->phy_interface to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as to whether or not we should override the interface value. Fixes: 19334920ea ("net: dsa: Set valid phy interface type") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2015-09-29 19:26:26 +02:00
..
Kconfig	net: dsa: make NET_DSA manually selectable from the config	2015-03-20 21:37:58 -04:00
Makefile	net: dsa: add Broadcom tag RX/TX handler	2014-08-27 22:59:40 -07:00
dsa.c	net: dsa: Properly propagate errors from dsa_switch_setup_one	2015-05-31 21:50:34 -07:00
dsa_priv.h	net: dsa: integrate with SWITCHDEV for HW bridging	2015-02-25 17:03:38 -05:00
slave.c	net: dsa: Do not override PHY interface if already configured	2015-09-29 19:26:26 +02:00
tag_brcm.c	dsa: Split ops up, and avoid assigning tag_protocol and receive separately	2014-09-15 17:24:20 -04:00
tag_dsa.c	net: dsa: Don't set skb->protocol on outgoing tagged packets	2014-10-30 14:54:10 -04:00
tag_edsa.c	net: dsa: Don't set skb->protocol on outgoing tagged packets	2014-10-30 14:54:10 -04:00
tag_trailer.c	net: dsa: Don't set skb->protocol on outgoing tagged packets	2014-10-30 14:54:10 -04:00