![Greg Kroah-Hartman](/assets/img/avatar_default.png)
This converts the digi_acceleport.c driver to use the module_usb_serial_driver() call instead of having to have a module_init/module_exit function, saving a lot of duplicated code. CC: Peter Berger <pberger@brimson.com> CC: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1591 lines
45 KiB
C
1591 lines
45 KiB
C
/*
|
|
* Digi AccelePort USB-4 and USB-2 Serial Converters
|
|
*
|
|
* Copyright 2000 by Digi International
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
|
|
* usb-serial driver.
|
|
*
|
|
* Peter Berger (pberger@brimson.com)
|
|
* Al Borchers (borchers@steinerpoint.com)
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/usb/serial.h>
|
|
|
|
/* Defines */
|
|
|
|
/*
|
|
* Version Information
|
|
*/
|
|
#define DRIVER_VERSION "v1.80.1.2"
|
|
#define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>"
|
|
#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver"
|
|
|
|
/* port output buffer length -- must be <= transfer buffer length - 2 */
|
|
/* so we can be sure to send the full buffer in one urb */
|
|
#define DIGI_OUT_BUF_SIZE 8
|
|
|
|
/* port input buffer length -- must be >= transfer buffer length - 3 */
|
|
/* so we can be sure to hold at least one full buffer from one urb */
|
|
#define DIGI_IN_BUF_SIZE 64
|
|
|
|
/* retry timeout while sleeping */
|
|
#define DIGI_RETRY_TIMEOUT (HZ/10)
|
|
|
|
/* timeout while waiting for tty output to drain in close */
|
|
/* this delay is used twice in close, so the total delay could */
|
|
/* be twice this value */
|
|
#define DIGI_CLOSE_TIMEOUT (5*HZ)
|
|
|
|
|
|
/* AccelePort USB Defines */
|
|
|
|
/* ids */
|
|
#define DIGI_VENDOR_ID 0x05c5
|
|
#define DIGI_2_ID 0x0002 /* USB-2 */
|
|
#define DIGI_4_ID 0x0004 /* USB-4 */
|
|
|
|
/* commands
|
|
* "INB": can be used on the in-band endpoint
|
|
* "OOB": can be used on the out-of-band endpoint
|
|
*/
|
|
#define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */
|
|
#define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */
|
|
#define DIGI_CMD_SET_PARITY 2 /* INB, OOB */
|
|
#define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */
|
|
#define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */
|
|
#define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */
|
|
#define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */
|
|
#define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */
|
|
#define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */
|
|
#define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */
|
|
#define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */
|
|
#define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */
|
|
#define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */
|
|
#define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */
|
|
#define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */
|
|
#define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */
|
|
#define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */
|
|
#define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */
|
|
#define DIGI_CMD_SEND_DATA 18 /* INB */
|
|
#define DIGI_CMD_RECEIVE_DATA 19 /* INB */
|
|
#define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */
|
|
#define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */
|
|
|
|
/* baud rates */
|
|
#define DIGI_BAUD_50 0
|
|
#define DIGI_BAUD_75 1
|
|
#define DIGI_BAUD_110 2
|
|
#define DIGI_BAUD_150 3
|
|
#define DIGI_BAUD_200 4
|
|
#define DIGI_BAUD_300 5
|
|
#define DIGI_BAUD_600 6
|
|
#define DIGI_BAUD_1200 7
|
|
#define DIGI_BAUD_1800 8
|
|
#define DIGI_BAUD_2400 9
|
|
#define DIGI_BAUD_4800 10
|
|
#define DIGI_BAUD_7200 11
|
|
#define DIGI_BAUD_9600 12
|
|
#define DIGI_BAUD_14400 13
|
|
#define DIGI_BAUD_19200 14
|
|
#define DIGI_BAUD_28800 15
|
|
#define DIGI_BAUD_38400 16
|
|
#define DIGI_BAUD_57600 17
|
|
#define DIGI_BAUD_76800 18
|
|
#define DIGI_BAUD_115200 19
|
|
#define DIGI_BAUD_153600 20
|
|
#define DIGI_BAUD_230400 21
|
|
#define DIGI_BAUD_460800 22
|
|
|
|
/* arguments */
|
|
#define DIGI_WORD_SIZE_5 0
|
|
#define DIGI_WORD_SIZE_6 1
|
|
#define DIGI_WORD_SIZE_7 2
|
|
#define DIGI_WORD_SIZE_8 3
|
|
|
|
#define DIGI_PARITY_NONE 0
|
|
#define DIGI_PARITY_ODD 1
|
|
#define DIGI_PARITY_EVEN 2
|
|
#define DIGI_PARITY_MARK 3
|
|
#define DIGI_PARITY_SPACE 4
|
|
|
|
#define DIGI_STOP_BITS_1 0
|
|
#define DIGI_STOP_BITS_2 1
|
|
|
|
#define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1
|
|
#define DIGI_INPUT_FLOW_CONTROL_RTS 2
|
|
#define DIGI_INPUT_FLOW_CONTROL_DTR 4
|
|
|
|
#define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1
|
|
#define DIGI_OUTPUT_FLOW_CONTROL_CTS 2
|
|
#define DIGI_OUTPUT_FLOW_CONTROL_DSR 4
|
|
|
|
#define DIGI_DTR_INACTIVE 0
|
|
#define DIGI_DTR_ACTIVE 1
|
|
#define DIGI_DTR_INPUT_FLOW_CONTROL 2
|
|
|
|
#define DIGI_RTS_INACTIVE 0
|
|
#define DIGI_RTS_ACTIVE 1
|
|
#define DIGI_RTS_INPUT_FLOW_CONTROL 2
|
|
#define DIGI_RTS_TOGGLE 3
|
|
|
|
#define DIGI_FLUSH_TX 1
|
|
#define DIGI_FLUSH_RX 2
|
|
#define DIGI_RESUME_TX 4 /* clears xoff condition */
|
|
|
|
#define DIGI_TRANSMIT_NOT_IDLE 0
|
|
#define DIGI_TRANSMIT_IDLE 1
|
|
|
|
#define DIGI_DISABLE 0
|
|
#define DIGI_ENABLE 1
|
|
|
|
#define DIGI_DEASSERT 0
|
|
#define DIGI_ASSERT 1
|
|
|
|
/* in band status codes */
|
|
#define DIGI_OVERRUN_ERROR 4
|
|
#define DIGI_PARITY_ERROR 8
|
|
#define DIGI_FRAMING_ERROR 16
|
|
#define DIGI_BREAK_ERROR 32
|
|
|
|
/* out of band status */
|
|
#define DIGI_NO_ERROR 0
|
|
#define DIGI_BAD_FIRST_PARAMETER 1
|
|
#define DIGI_BAD_SECOND_PARAMETER 2
|
|
#define DIGI_INVALID_LINE 3
|
|
#define DIGI_INVALID_OPCODE 4
|
|
|
|
/* input signals */
|
|
#define DIGI_READ_INPUT_SIGNALS_SLOT 1
|
|
#define DIGI_READ_INPUT_SIGNALS_ERR 2
|
|
#define DIGI_READ_INPUT_SIGNALS_BUSY 4
|
|
#define DIGI_READ_INPUT_SIGNALS_PE 8
|
|
#define DIGI_READ_INPUT_SIGNALS_CTS 16
|
|
#define DIGI_READ_INPUT_SIGNALS_DSR 32
|
|
#define DIGI_READ_INPUT_SIGNALS_RI 64
|
|
#define DIGI_READ_INPUT_SIGNALS_DCD 128
|
|
|
|
|
|
/* Structures */
|
|
|
|
struct digi_serial {
|
|
spinlock_t ds_serial_lock;
|
|
struct usb_serial_port *ds_oob_port; /* out-of-band port */
|
|
int ds_oob_port_num; /* index of out-of-band port */
|
|
int ds_device_started;
|
|
};
|
|
|
|
struct digi_port {
|
|
spinlock_t dp_port_lock;
|
|
int dp_port_num;
|
|
int dp_out_buf_len;
|
|
unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE];
|
|
int dp_write_urb_in_use;
|
|
unsigned int dp_modem_signals;
|
|
wait_queue_head_t dp_modem_change_wait;
|
|
int dp_transmit_idle;
|
|
wait_queue_head_t dp_transmit_idle_wait;
|
|
int dp_throttled;
|
|
int dp_throttle_restart;
|
|
wait_queue_head_t dp_flush_wait;
|
|
wait_queue_head_t dp_close_wait; /* wait queue for close */
|
|
struct work_struct dp_wakeup_work;
|
|
struct usb_serial_port *dp_port;
|
|
};
|
|
|
|
|
|
/* Local Function Declarations */
|
|
|
|
static void digi_wakeup_write(struct usb_serial_port *port);
|
|
static void digi_wakeup_write_lock(struct work_struct *work);
|
|
static int digi_write_oob_command(struct usb_serial_port *port,
|
|
unsigned char *buf, int count, int interruptible);
|
|
static int digi_write_inb_command(struct usb_serial_port *port,
|
|
unsigned char *buf, int count, unsigned long timeout);
|
|
static int digi_set_modem_signals(struct usb_serial_port *port,
|
|
unsigned int modem_signals, int interruptible);
|
|
static int digi_transmit_idle(struct usb_serial_port *port,
|
|
unsigned long timeout);
|
|
static void digi_rx_throttle(struct tty_struct *tty);
|
|
static void digi_rx_unthrottle(struct tty_struct *tty);
|
|
static void digi_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct ktermios *old_termios);
|
|
static void digi_break_ctl(struct tty_struct *tty, int break_state);
|
|
static int digi_tiocmget(struct tty_struct *tty);
|
|
static int digi_tiocmset(struct tty_struct *tty, unsigned int set,
|
|
unsigned int clear);
|
|
static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
|
|
const unsigned char *buf, int count);
|
|
static void digi_write_bulk_callback(struct urb *urb);
|
|
static int digi_write_room(struct tty_struct *tty);
|
|
static int digi_chars_in_buffer(struct tty_struct *tty);
|
|
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
|
|
static void digi_close(struct usb_serial_port *port);
|
|
static void digi_dtr_rts(struct usb_serial_port *port, int on);
|
|
static int digi_startup_device(struct usb_serial *serial);
|
|
static int digi_startup(struct usb_serial *serial);
|
|
static void digi_disconnect(struct usb_serial *serial);
|
|
static void digi_release(struct usb_serial *serial);
|
|
static void digi_read_bulk_callback(struct urb *urb);
|
|
static int digi_read_inb_callback(struct urb *urb);
|
|
static int digi_read_oob_callback(struct urb *urb);
|
|
|
|
|
|
/* Statics */
|
|
|
|
static bool debug;
|
|
|
|
static const struct usb_device_id id_table_combined[] = {
|
|
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
|
|
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
static const struct usb_device_id id_table_2[] = {
|
|
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
static const struct usb_device_id id_table_4[] = {
|
|
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, id_table_combined);
|
|
|
|
static struct usb_driver digi_driver = {
|
|
.name = "digi_acceleport",
|
|
.probe = usb_serial_probe,
|
|
.disconnect = usb_serial_disconnect,
|
|
.id_table = id_table_combined,
|
|
};
|
|
|
|
|
|
/* device info needed for the Digi serial converter */
|
|
|
|
static struct usb_serial_driver digi_acceleport_2_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "digi_2",
|
|
},
|
|
.description = "Digi 2 port USB adapter",
|
|
.id_table = id_table_2,
|
|
.num_ports = 3,
|
|
.open = digi_open,
|
|
.close = digi_close,
|
|
.dtr_rts = digi_dtr_rts,
|
|
.write = digi_write,
|
|
.write_room = digi_write_room,
|
|
.write_bulk_callback = digi_write_bulk_callback,
|
|
.read_bulk_callback = digi_read_bulk_callback,
|
|
.chars_in_buffer = digi_chars_in_buffer,
|
|
.throttle = digi_rx_throttle,
|
|
.unthrottle = digi_rx_unthrottle,
|
|
.set_termios = digi_set_termios,
|
|
.break_ctl = digi_break_ctl,
|
|
.tiocmget = digi_tiocmget,
|
|
.tiocmset = digi_tiocmset,
|
|
.attach = digi_startup,
|
|
.disconnect = digi_disconnect,
|
|
.release = digi_release,
|
|
};
|
|
|
|
static struct usb_serial_driver digi_acceleport_4_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "digi_4",
|
|
},
|
|
.description = "Digi 4 port USB adapter",
|
|
.id_table = id_table_4,
|
|
.num_ports = 4,
|
|
.open = digi_open,
|
|
.close = digi_close,
|
|
.write = digi_write,
|
|
.write_room = digi_write_room,
|
|
.write_bulk_callback = digi_write_bulk_callback,
|
|
.read_bulk_callback = digi_read_bulk_callback,
|
|
.chars_in_buffer = digi_chars_in_buffer,
|
|
.throttle = digi_rx_throttle,
|
|
.unthrottle = digi_rx_unthrottle,
|
|
.set_termios = digi_set_termios,
|
|
.break_ctl = digi_break_ctl,
|
|
.tiocmget = digi_tiocmget,
|
|
.tiocmset = digi_tiocmset,
|
|
.attach = digi_startup,
|
|
.disconnect = digi_disconnect,
|
|
.release = digi_release,
|
|
};
|
|
|
|
static struct usb_serial_driver * const serial_drivers[] = {
|
|
&digi_acceleport_2_device, &digi_acceleport_4_device, NULL
|
|
};
|
|
|
|
/* Functions */
|
|
|
|
/*
|
|
* Cond Wait Interruptible Timeout Irqrestore
|
|
*
|
|
* Do spin_unlock_irqrestore and interruptible_sleep_on_timeout
|
|
* so that wake ups are not lost if they occur between the unlock
|
|
* and the sleep. In other words, spin_unlock_irqrestore and
|
|
* interruptible_sleep_on_timeout are "atomic" with respect to
|
|
* wake ups. This is used to implement condition variables.
|
|
*
|
|
* interruptible_sleep_on_timeout is deprecated and has been replaced
|
|
* with the equivalent code.
|
|
*/
|
|
|
|
static long cond_wait_interruptible_timeout_irqrestore(
|
|
wait_queue_head_t *q, long timeout,
|
|
spinlock_t *lock, unsigned long flags)
|
|
__releases(lock)
|
|
{
|
|
DEFINE_WAIT(wait);
|
|
|
|
prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE);
|
|
spin_unlock_irqrestore(lock, flags);
|
|
timeout = schedule_timeout(timeout);
|
|
finish_wait(q, &wait);
|
|
|
|
return timeout;
|
|
}
|
|
|
|
|
|
/*
|
|
* Digi Wakeup Write
|
|
*
|
|
* Wake up port, line discipline, and tty processes sleeping
|
|
* on writes.
|
|
*/
|
|
|
|
static void digi_wakeup_write_lock(struct work_struct *work)
|
|
{
|
|
struct digi_port *priv =
|
|
container_of(work, struct digi_port, dp_wakeup_work);
|
|
struct usb_serial_port *port = priv->dp_port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
digi_wakeup_write(port);
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
}
|
|
|
|
static void digi_wakeup_write(struct usb_serial_port *port)
|
|
{
|
|
struct tty_struct *tty = tty_port_tty_get(&port->port);
|
|
if (tty) {
|
|
tty_wakeup(tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Digi Write OOB Command
|
|
*
|
|
* Write commands on the out of band port. Commands are 4
|
|
* bytes each, multiple commands can be sent at once, and
|
|
* no command will be split across USB packets. Returns 0
|
|
* if successful, -EINTR if interrupted while sleeping and
|
|
* the interruptible flag is true, or a negative error
|
|
* returned by usb_submit_urb.
|
|
*/
|
|
|
|
static int digi_write_oob_command(struct usb_serial_port *port,
|
|
unsigned char *buf, int count, int interruptible)
|
|
{
|
|
|
|
int ret = 0;
|
|
int len;
|
|
struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
|
|
struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
|
|
unsigned long flags = 0;
|
|
|
|
dbg("digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count);
|
|
|
|
spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
|
|
while (count > 0) {
|
|
while (oob_priv->dp_write_urb_in_use) {
|
|
cond_wait_interruptible_timeout_irqrestore(
|
|
&oob_port->write_wait, DIGI_RETRY_TIMEOUT,
|
|
&oob_priv->dp_port_lock, flags);
|
|
if (interruptible && signal_pending(current))
|
|
return -EINTR;
|
|
spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
|
|
}
|
|
|
|
/* len must be a multiple of 4, so commands are not split */
|
|
len = min(count, oob_port->bulk_out_size);
|
|
if (len > 4)
|
|
len &= ~3;
|
|
memcpy(oob_port->write_urb->transfer_buffer, buf, len);
|
|
oob_port->write_urb->transfer_buffer_length = len;
|
|
ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
|
|
if (ret == 0) {
|
|
oob_priv->dp_write_urb_in_use = 1;
|
|
count -= len;
|
|
buf += len;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
|
|
if (ret)
|
|
dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* Digi Write In Band Command
|
|
*
|
|
* Write commands on the given port. Commands are 4
|
|
* bytes each, multiple commands can be sent at once, and
|
|
* no command will be split across USB packets. If timeout
|
|
* is non-zero, write in band command will return after
|
|
* waiting unsuccessfully for the URB status to clear for
|
|
* timeout ticks. Returns 0 if successful, or a negative
|
|
* error returned by digi_write.
|
|
*/
|
|
|
|
static int digi_write_inb_command(struct usb_serial_port *port,
|
|
unsigned char *buf, int count, unsigned long timeout)
|
|
{
|
|
int ret = 0;
|
|
int len;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
unsigned char *data = port->write_urb->transfer_buffer;
|
|
unsigned long flags = 0;
|
|
|
|
dbg("digi_write_inb_command: TOP: port=%d, count=%d",
|
|
priv->dp_port_num, count);
|
|
|
|
if (timeout)
|
|
timeout += jiffies;
|
|
else
|
|
timeout = ULONG_MAX;
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
while (count > 0 && ret == 0) {
|
|
while (priv->dp_write_urb_in_use &&
|
|
time_before(jiffies, timeout)) {
|
|
cond_wait_interruptible_timeout_irqrestore(
|
|
&port->write_wait, DIGI_RETRY_TIMEOUT,
|
|
&priv->dp_port_lock, flags);
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
}
|
|
|
|
/* len must be a multiple of 4 and small enough to */
|
|
/* guarantee the write will send buffered data first, */
|
|
/* so commands are in order with data and not split */
|
|
len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
|
|
if (len > 4)
|
|
len &= ~3;
|
|
|
|
/* write any buffered data first */
|
|
if (priv->dp_out_buf_len > 0) {
|
|
data[0] = DIGI_CMD_SEND_DATA;
|
|
data[1] = priv->dp_out_buf_len;
|
|
memcpy(data + 2, priv->dp_out_buf,
|
|
priv->dp_out_buf_len);
|
|
memcpy(data + 2 + priv->dp_out_buf_len, buf, len);
|
|
port->write_urb->transfer_buffer_length
|
|
= priv->dp_out_buf_len + 2 + len;
|
|
} else {
|
|
memcpy(data, buf, len);
|
|
port->write_urb->transfer_buffer_length = len;
|
|
}
|
|
|
|
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
|
|
if (ret == 0) {
|
|
priv->dp_write_urb_in_use = 1;
|
|
priv->dp_out_buf_len = 0;
|
|
count -= len;
|
|
buf += len;
|
|
}
|
|
|
|
}
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
|
|
if (ret)
|
|
dev_err(&port->dev,
|
|
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
|
|
__func__, ret, priv->dp_port_num);
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* Digi Set Modem Signals
|
|
*
|
|
* Sets or clears DTR and RTS on the port, according to the
|
|
* modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags
|
|
* for the modem_signals argument. Returns 0 if successful,
|
|
* -EINTR if interrupted while sleeping, or a non-zero error
|
|
* returned by usb_submit_urb.
|
|
*/
|
|
|
|
static int digi_set_modem_signals(struct usb_serial_port *port,
|
|
unsigned int modem_signals, int interruptible)
|
|
{
|
|
|
|
int ret;
|
|
struct digi_port *port_priv = usb_get_serial_port_data(port);
|
|
struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port;
|
|
struct digi_port *oob_priv = usb_get_serial_port_data(oob_port);
|
|
unsigned char *data = oob_port->write_urb->transfer_buffer;
|
|
unsigned long flags = 0;
|
|
|
|
|
|
dbg("digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x",
|
|
port_priv->dp_port_num, modem_signals);
|
|
|
|
spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
|
|
spin_lock(&port_priv->dp_port_lock);
|
|
|
|
while (oob_priv->dp_write_urb_in_use) {
|
|
spin_unlock(&port_priv->dp_port_lock);
|
|
cond_wait_interruptible_timeout_irqrestore(
|
|
&oob_port->write_wait, DIGI_RETRY_TIMEOUT,
|
|
&oob_priv->dp_port_lock, flags);
|
|
if (interruptible && signal_pending(current))
|
|
return -EINTR;
|
|
spin_lock_irqsave(&oob_priv->dp_port_lock, flags);
|
|
spin_lock(&port_priv->dp_port_lock);
|
|
}
|
|
data[0] = DIGI_CMD_SET_DTR_SIGNAL;
|
|
data[1] = port_priv->dp_port_num;
|
|
data[2] = (modem_signals & TIOCM_DTR) ?
|
|
DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE;
|
|
data[3] = 0;
|
|
data[4] = DIGI_CMD_SET_RTS_SIGNAL;
|
|
data[5] = port_priv->dp_port_num;
|
|
data[6] = (modem_signals & TIOCM_RTS) ?
|
|
DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE;
|
|
data[7] = 0;
|
|
|
|
oob_port->write_urb->transfer_buffer_length = 8;
|
|
|
|
ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC);
|
|
if (ret == 0) {
|
|
oob_priv->dp_write_urb_in_use = 1;
|
|
port_priv->dp_modem_signals =
|
|
(port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS))
|
|
| (modem_signals&(TIOCM_DTR|TIOCM_RTS));
|
|
}
|
|
spin_unlock(&port_priv->dp_port_lock);
|
|
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
|
|
if (ret)
|
|
dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Digi Transmit Idle
|
|
*
|
|
* Digi transmit idle waits, up to timeout ticks, for the transmitter
|
|
* to go idle. It returns 0 if successful or a negative error.
|
|
*
|
|
* There are race conditions here if more than one process is calling
|
|
* digi_transmit_idle on the same port at the same time. However, this
|
|
* is only called from close, and only one process can be in close on a
|
|
* port at a time, so its ok.
|
|
*/
|
|
|
|
static int digi_transmit_idle(struct usb_serial_port *port,
|
|
unsigned long timeout)
|
|
{
|
|
int ret;
|
|
unsigned char buf[2];
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
unsigned long flags = 0;
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
priv->dp_transmit_idle = 0;
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
|
|
buf[0] = DIGI_CMD_TRANSMIT_IDLE;
|
|
buf[1] = 0;
|
|
|
|
timeout += jiffies;
|
|
|
|
ret = digi_write_inb_command(port, buf, 2, timeout - jiffies);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
|
|
while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) {
|
|
cond_wait_interruptible_timeout_irqrestore(
|
|
&priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT,
|
|
&priv->dp_port_lock, flags);
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
}
|
|
priv->dp_transmit_idle = 0;
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
static void digi_rx_throttle(struct tty_struct *tty)
|
|
{
|
|
unsigned long flags;
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
|
|
|
|
dbg("digi_rx_throttle: TOP: port=%d", priv->dp_port_num);
|
|
|
|
/* stop receiving characters by not resubmitting the read urb */
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
priv->dp_throttled = 1;
|
|
priv->dp_throttle_restart = 0;
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
}
|
|
|
|
|
|
static void digi_rx_unthrottle(struct tty_struct *tty)
|
|
{
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
|
|
dbg("digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num);
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
|
|
/* restart read chain */
|
|
if (priv->dp_throttle_restart)
|
|
ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
|
|
|
|
/* turn throttle off */
|
|
priv->dp_throttled = 0;
|
|
priv->dp_throttle_restart = 0;
|
|
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
|
|
if (ret)
|
|
dev_err(&port->dev,
|
|
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
|
|
__func__, ret, priv->dp_port_num);
|
|
}
|
|
|
|
|
|
static void digi_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct ktermios *old_termios)
|
|
{
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
unsigned int iflag = tty->termios->c_iflag;
|
|
unsigned int cflag = tty->termios->c_cflag;
|
|
unsigned int old_iflag = old_termios->c_iflag;
|
|
unsigned int old_cflag = old_termios->c_cflag;
|
|
unsigned char buf[32];
|
|
unsigned int modem_signals;
|
|
int arg, ret;
|
|
int i = 0;
|
|
speed_t baud;
|
|
|
|
dbg("digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag);
|
|
|
|
/* set baud rate */
|
|
baud = tty_get_baud_rate(tty);
|
|
if (baud != tty_termios_baud_rate(old_termios)) {
|
|
arg = -1;
|
|
|
|
/* reassert DTR and (maybe) RTS on transition from B0 */
|
|
if ((old_cflag&CBAUD) == B0) {
|
|
/* don't set RTS if using hardware flow control */
|
|
/* and throttling input */
|
|
modem_signals = TIOCM_DTR;
|
|
if (!(tty->termios->c_cflag & CRTSCTS) ||
|
|
!test_bit(TTY_THROTTLED, &tty->flags))
|
|
modem_signals |= TIOCM_RTS;
|
|
digi_set_modem_signals(port, modem_signals, 1);
|
|
}
|
|
switch (baud) {
|
|
/* drop DTR and RTS on transition to B0 */
|
|
case 0: digi_set_modem_signals(port, 0, 1); break;
|
|
case 50: arg = DIGI_BAUD_50; break;
|
|
case 75: arg = DIGI_BAUD_75; break;
|
|
case 110: arg = DIGI_BAUD_110; break;
|
|
case 150: arg = DIGI_BAUD_150; break;
|
|
case 200: arg = DIGI_BAUD_200; break;
|
|
case 300: arg = DIGI_BAUD_300; break;
|
|
case 600: arg = DIGI_BAUD_600; break;
|
|
case 1200: arg = DIGI_BAUD_1200; break;
|
|
case 1800: arg = DIGI_BAUD_1800; break;
|
|
case 2400: arg = DIGI_BAUD_2400; break;
|
|
case 4800: arg = DIGI_BAUD_4800; break;
|
|
case 9600: arg = DIGI_BAUD_9600; break;
|
|
case 19200: arg = DIGI_BAUD_19200; break;
|
|
case 38400: arg = DIGI_BAUD_38400; break;
|
|
case 57600: arg = DIGI_BAUD_57600; break;
|
|
case 115200: arg = DIGI_BAUD_115200; break;
|
|
case 230400: arg = DIGI_BAUD_230400; break;
|
|
case 460800: arg = DIGI_BAUD_460800; break;
|
|
default:
|
|
arg = DIGI_BAUD_9600;
|
|
baud = 9600;
|
|
break;
|
|
}
|
|
if (arg != -1) {
|
|
buf[i++] = DIGI_CMD_SET_BAUD_RATE;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = arg;
|
|
buf[i++] = 0;
|
|
}
|
|
}
|
|
/* set parity */
|
|
tty->termios->c_cflag &= ~CMSPAR;
|
|
|
|
if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
|
|
if (cflag&PARENB) {
|
|
if (cflag&PARODD)
|
|
arg = DIGI_PARITY_ODD;
|
|
else
|
|
arg = DIGI_PARITY_EVEN;
|
|
} else {
|
|
arg = DIGI_PARITY_NONE;
|
|
}
|
|
buf[i++] = DIGI_CMD_SET_PARITY;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = arg;
|
|
buf[i++] = 0;
|
|
}
|
|
/* set word size */
|
|
if ((cflag&CSIZE) != (old_cflag&CSIZE)) {
|
|
arg = -1;
|
|
switch (cflag&CSIZE) {
|
|
case CS5: arg = DIGI_WORD_SIZE_5; break;
|
|
case CS6: arg = DIGI_WORD_SIZE_6; break;
|
|
case CS7: arg = DIGI_WORD_SIZE_7; break;
|
|
case CS8: arg = DIGI_WORD_SIZE_8; break;
|
|
default:
|
|
dbg("digi_set_termios: can't handle word size %d",
|
|
(cflag&CSIZE));
|
|
break;
|
|
}
|
|
|
|
if (arg != -1) {
|
|
buf[i++] = DIGI_CMD_SET_WORD_SIZE;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = arg;
|
|
buf[i++] = 0;
|
|
}
|
|
|
|
}
|
|
|
|
/* set stop bits */
|
|
if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) {
|
|
|
|
if ((cflag&CSTOPB))
|
|
arg = DIGI_STOP_BITS_2;
|
|
else
|
|
arg = DIGI_STOP_BITS_1;
|
|
|
|
buf[i++] = DIGI_CMD_SET_STOP_BITS;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = arg;
|
|
buf[i++] = 0;
|
|
|
|
}
|
|
|
|
/* set input flow control */
|
|
if ((iflag&IXOFF) != (old_iflag&IXOFF)
|
|
|| (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
|
|
arg = 0;
|
|
if (iflag&IXOFF)
|
|
arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
|
|
else
|
|
arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF;
|
|
|
|
if (cflag&CRTSCTS) {
|
|
arg |= DIGI_INPUT_FLOW_CONTROL_RTS;
|
|
|
|
/* On USB-4 it is necessary to assert RTS prior */
|
|
/* to selecting RTS input flow control. */
|
|
buf[i++] = DIGI_CMD_SET_RTS_SIGNAL;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = DIGI_RTS_ACTIVE;
|
|
buf[i++] = 0;
|
|
|
|
} else {
|
|
arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS;
|
|
}
|
|
buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = arg;
|
|
buf[i++] = 0;
|
|
}
|
|
|
|
/* set output flow control */
|
|
if ((iflag & IXON) != (old_iflag & IXON)
|
|
|| (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
|
|
arg = 0;
|
|
if (iflag & IXON)
|
|
arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
|
|
else
|
|
arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
|
|
|
|
if (cflag & CRTSCTS) {
|
|
arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
|
|
} else {
|
|
arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
|
|
tty->hw_stopped = 0;
|
|
}
|
|
|
|
buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = arg;
|
|
buf[i++] = 0;
|
|
}
|
|
|
|
/* set receive enable/disable */
|
|
if ((cflag & CREAD) != (old_cflag & CREAD)) {
|
|
if (cflag & CREAD)
|
|
arg = DIGI_ENABLE;
|
|
else
|
|
arg = DIGI_DISABLE;
|
|
|
|
buf[i++] = DIGI_CMD_RECEIVE_ENABLE;
|
|
buf[i++] = priv->dp_port_num;
|
|
buf[i++] = arg;
|
|
buf[i++] = 0;
|
|
}
|
|
ret = digi_write_oob_command(port, buf, i, 1);
|
|
if (ret != 0)
|
|
dbg("digi_set_termios: write oob failed, ret=%d", ret);
|
|
tty_encode_baud_rate(tty, baud, baud);
|
|
}
|
|
|
|
|
|
static void digi_break_ctl(struct tty_struct *tty, int break_state)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
unsigned char buf[4];
|
|
|
|
buf[0] = DIGI_CMD_BREAK_CONTROL;
|
|
buf[1] = 2; /* length */
|
|
buf[2] = break_state ? 1 : 0;
|
|
buf[3] = 0; /* pad */
|
|
digi_write_inb_command(port, buf, 4, 0);
|
|
}
|
|
|
|
|
|
static int digi_tiocmget(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
unsigned int val;
|
|
unsigned long flags;
|
|
|
|
dbg("%s: TOP: port=%d", __func__, priv->dp_port_num);
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
val = priv->dp_modem_signals;
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
return val;
|
|
}
|
|
|
|
|
|
static int digi_tiocmset(struct tty_struct *tty,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
unsigned int val;
|
|
unsigned long flags;
|
|
|
|
dbg("%s: TOP: port=%d", __func__, priv->dp_port_num);
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
val = (priv->dp_modem_signals & ~clear) | set;
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
return digi_set_modem_signals(port, val, 1);
|
|
}
|
|
|
|
|
|
static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
|
|
int ret, data_len, new_len;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
unsigned char *data = port->write_urb->transfer_buffer;
|
|
unsigned long flags = 0;
|
|
|
|
dbg("digi_write: TOP: port=%d, count=%d, in_interrupt=%ld",
|
|
priv->dp_port_num, count, in_interrupt());
|
|
|
|
/* copy user data (which can sleep) before getting spin lock */
|
|
count = min(count, port->bulk_out_size-2);
|
|
count = min(64, count);
|
|
|
|
/* be sure only one write proceeds at a time */
|
|
/* there are races on the port private buffer */
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
|
|
/* wait for urb status clear to submit another urb */
|
|
if (priv->dp_write_urb_in_use) {
|
|
/* buffer data if count is 1 (probably put_char) if possible */
|
|
if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) {
|
|
priv->dp_out_buf[priv->dp_out_buf_len++] = *buf;
|
|
new_len = 1;
|
|
} else {
|
|
new_len = 0;
|
|
}
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
return new_len;
|
|
}
|
|
|
|
/* allow space for any buffered data and for new data, up to */
|
|
/* transfer buffer size - 2 (for command and length bytes) */
|
|
new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len);
|
|
data_len = new_len + priv->dp_out_buf_len;
|
|
|
|
if (data_len == 0) {
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
port->write_urb->transfer_buffer_length = data_len+2;
|
|
|
|
*data++ = DIGI_CMD_SEND_DATA;
|
|
*data++ = data_len;
|
|
|
|
/* copy in buffered data first */
|
|
memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len);
|
|
data += priv->dp_out_buf_len;
|
|
|
|
/* copy in new data */
|
|
memcpy(data, buf, new_len);
|
|
|
|
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
|
|
if (ret == 0) {
|
|
priv->dp_write_urb_in_use = 1;
|
|
ret = new_len;
|
|
priv->dp_out_buf_len = 0;
|
|
}
|
|
|
|
/* return length of new data written, or error */
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
if (ret < 0)
|
|
dev_err_console(port,
|
|
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
|
|
__func__, ret, priv->dp_port_num);
|
|
dbg("digi_write: returning %d", ret);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static void digi_write_bulk_callback(struct urb *urb)
|
|
{
|
|
|
|
struct usb_serial_port *port = urb->context;
|
|
struct usb_serial *serial;
|
|
struct digi_port *priv;
|
|
struct digi_serial *serial_priv;
|
|
int ret = 0;
|
|
int status = urb->status;
|
|
|
|
dbg("digi_write_bulk_callback: TOP, status=%d", status);
|
|
|
|
/* port and serial sanity check */
|
|
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
|
|
pr_err("%s: port or port->private is NULL, status=%d\n",
|
|
__func__, status);
|
|
return;
|
|
}
|
|
serial = port->serial;
|
|
if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
|
|
dev_err(&port->dev,
|
|
"%s: serial or serial->private is NULL, status=%d\n",
|
|
__func__, status);
|
|
return;
|
|
}
|
|
|
|
/* handle oob callback */
|
|
if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
|
|
dbg("digi_write_bulk_callback: oob callback");
|
|
spin_lock(&priv->dp_port_lock);
|
|
priv->dp_write_urb_in_use = 0;
|
|
wake_up_interruptible(&port->write_wait);
|
|
spin_unlock(&priv->dp_port_lock);
|
|
return;
|
|
}
|
|
|
|
/* try to send any buffered data on this port */
|
|
spin_lock(&priv->dp_port_lock);
|
|
priv->dp_write_urb_in_use = 0;
|
|
if (priv->dp_out_buf_len > 0) {
|
|
*((unsigned char *)(port->write_urb->transfer_buffer))
|
|
= (unsigned char)DIGI_CMD_SEND_DATA;
|
|
*((unsigned char *)(port->write_urb->transfer_buffer) + 1)
|
|
= (unsigned char)priv->dp_out_buf_len;
|
|
port->write_urb->transfer_buffer_length =
|
|
priv->dp_out_buf_len + 2;
|
|
memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf,
|
|
priv->dp_out_buf_len);
|
|
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
|
|
if (ret == 0) {
|
|
priv->dp_write_urb_in_use = 1;
|
|
priv->dp_out_buf_len = 0;
|
|
}
|
|
}
|
|
/* wake up processes sleeping on writes immediately */
|
|
digi_wakeup_write(port);
|
|
/* also queue up a wakeup at scheduler time, in case we */
|
|
/* lost the race in write_chan(). */
|
|
schedule_work(&priv->dp_wakeup_work);
|
|
|
|
spin_unlock(&priv->dp_port_lock);
|
|
if (ret && ret != -EPERM)
|
|
dev_err_console(port,
|
|
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
|
|
__func__, ret, priv->dp_port_num);
|
|
}
|
|
|
|
static int digi_write_room(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
int room;
|
|
unsigned long flags = 0;
|
|
|
|
spin_lock_irqsave(&priv->dp_port_lock, flags);
|
|
|
|
if (priv->dp_write_urb_in_use)
|
|
room = 0;
|
|
else
|
|
room = port->bulk_out_size - 2 - priv->dp_out_buf_len;
|
|
|
|
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
|
|
dbg("digi_write_room: port=%d, room=%d", priv->dp_port_num, room);
|
|
return room;
|
|
|
|
}
|
|
|
|
static int digi_chars_in_buffer(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
|
|
if (priv->dp_write_urb_in_use) {
|
|
dbg("digi_chars_in_buffer: port=%d, chars=%d",
|
|
priv->dp_port_num, port->bulk_out_size - 2);
|
|
/* return(port->bulk_out_size - 2); */
|
|
return 256;
|
|
} else {
|
|
dbg("digi_chars_in_buffer: port=%d, chars=%d",
|
|
priv->dp_port_num, priv->dp_out_buf_len);
|
|
return priv->dp_out_buf_len;
|
|
}
|
|
|
|
}
|
|
|
|
static void digi_dtr_rts(struct usb_serial_port *port, int on)
|
|
{
|
|
/* Adjust DTR and RTS */
|
|
digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
|
|
}
|
|
|
|
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
|
|
{
|
|
int ret;
|
|
unsigned char buf[32];
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
struct ktermios not_termios;
|
|
|
|
dbg("digi_open: TOP: port=%d", priv->dp_port_num);
|
|
|
|
/* be sure the device is started up */
|
|
if (digi_startup_device(port->serial) != 0)
|
|
return -ENXIO;
|
|
|
|
/* read modem signals automatically whenever they change */
|
|
buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
|
|
buf[1] = priv->dp_port_num;
|
|
buf[2] = DIGI_ENABLE;
|
|
buf[3] = 0;
|
|
|
|
/* flush fifos */
|
|
buf[4] = DIGI_CMD_IFLUSH_FIFO;
|
|
buf[5] = priv->dp_port_num;
|
|
buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
|
|
buf[7] = 0;
|
|
|
|
ret = digi_write_oob_command(port, buf, 8, 1);
|
|
if (ret != 0)
|
|
dbg("digi_open: write oob failed, ret=%d", ret);
|
|
|
|
/* set termios settings */
|
|
if (tty) {
|
|
not_termios.c_cflag = ~tty->termios->c_cflag;
|
|
not_termios.c_iflag = ~tty->termios->c_iflag;
|
|
digi_set_termios(tty, port, ¬_termios);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void digi_close(struct usb_serial_port *port)
|
|
{
|
|
DEFINE_WAIT(wait);
|
|
int ret;
|
|
unsigned char buf[32];
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
|
|
dbg("digi_close: TOP: port=%d", priv->dp_port_num);
|
|
|
|
mutex_lock(&port->serial->disc_mutex);
|
|
/* if disconnected, just clear flags */
|
|
if (port->serial->disconnected)
|
|
goto exit;
|
|
|
|
if (port->serial->dev) {
|
|
/* FIXME: Transmit idle belongs in the wait_unti_sent path */
|
|
digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
|
|
|
|
/* disable input flow control */
|
|
buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
|
|
buf[1] = priv->dp_port_num;
|
|
buf[2] = DIGI_DISABLE;
|
|
buf[3] = 0;
|
|
|
|
/* disable output flow control */
|
|
buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
|
|
buf[5] = priv->dp_port_num;
|
|
buf[6] = DIGI_DISABLE;
|
|
buf[7] = 0;
|
|
|
|
/* disable reading modem signals automatically */
|
|
buf[8] = DIGI_CMD_READ_INPUT_SIGNALS;
|
|
buf[9] = priv->dp_port_num;
|
|
buf[10] = DIGI_DISABLE;
|
|
buf[11] = 0;
|
|
|
|
/* disable receive */
|
|
buf[12] = DIGI_CMD_RECEIVE_ENABLE;
|
|
buf[13] = priv->dp_port_num;
|
|
buf[14] = DIGI_DISABLE;
|
|
buf[15] = 0;
|
|
|
|
/* flush fifos */
|
|
buf[16] = DIGI_CMD_IFLUSH_FIFO;
|
|
buf[17] = priv->dp_port_num;
|
|
buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX;
|
|
buf[19] = 0;
|
|
|
|
ret = digi_write_oob_command(port, buf, 20, 0);
|
|
if (ret != 0)
|
|
dbg("digi_close: write oob failed, ret=%d", ret);
|
|
|
|
/* wait for final commands on oob port to complete */
|
|
prepare_to_wait(&priv->dp_flush_wait, &wait,
|
|
TASK_INTERRUPTIBLE);
|
|
schedule_timeout(DIGI_CLOSE_TIMEOUT);
|
|
finish_wait(&priv->dp_flush_wait, &wait);
|
|
|
|
/* shutdown any outstanding bulk writes */
|
|
usb_kill_urb(port->write_urb);
|
|
}
|
|
exit:
|
|
spin_lock_irq(&priv->dp_port_lock);
|
|
priv->dp_write_urb_in_use = 0;
|
|
wake_up_interruptible(&priv->dp_close_wait);
|
|
spin_unlock_irq(&priv->dp_port_lock);
|
|
mutex_unlock(&port->serial->disc_mutex);
|
|
dbg("digi_close: done");
|
|
}
|
|
|
|
|
|
/*
|
|
* Digi Startup Device
|
|
*
|
|
* Starts reads on all ports. Must be called AFTER startup, with
|
|
* urbs initialized. Returns 0 if successful, non-zero error otherwise.
|
|
*/
|
|
|
|
static int digi_startup_device(struct usb_serial *serial)
|
|
{
|
|
int i, ret = 0;
|
|
struct digi_serial *serial_priv = usb_get_serial_data(serial);
|
|
struct usb_serial_port *port;
|
|
|
|
/* be sure this happens exactly once */
|
|
spin_lock(&serial_priv->ds_serial_lock);
|
|
if (serial_priv->ds_device_started) {
|
|
spin_unlock(&serial_priv->ds_serial_lock);
|
|
return 0;
|
|
}
|
|
serial_priv->ds_device_started = 1;
|
|
spin_unlock(&serial_priv->ds_serial_lock);
|
|
|
|
/* start reading from each bulk in endpoint for the device */
|
|
/* set USB_DISABLE_SPD flag for write bulk urbs */
|
|
for (i = 0; i < serial->type->num_ports + 1; i++) {
|
|
port = serial->port[i];
|
|
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
|
|
if (ret != 0) {
|
|
dev_err(&port->dev,
|
|
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
|
|
__func__, ret, i);
|
|
break;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int digi_startup(struct usb_serial *serial)
|
|
{
|
|
|
|
int i;
|
|
struct digi_port *priv;
|
|
struct digi_serial *serial_priv;
|
|
|
|
dbg("digi_startup: TOP");
|
|
|
|
/* allocate the private data structures for all ports */
|
|
/* number of regular ports + 1 for the out-of-band port */
|
|
for (i = 0; i < serial->type->num_ports + 1; i++) {
|
|
/* allocate port private structure */
|
|
priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL);
|
|
if (priv == NULL) {
|
|
while (--i >= 0)
|
|
kfree(usb_get_serial_port_data(serial->port[i]));
|
|
return 1; /* error */
|
|
}
|
|
|
|
/* initialize port private structure */
|
|
spin_lock_init(&priv->dp_port_lock);
|
|
priv->dp_port_num = i;
|
|
priv->dp_out_buf_len = 0;
|
|
priv->dp_write_urb_in_use = 0;
|
|
priv->dp_modem_signals = 0;
|
|
init_waitqueue_head(&priv->dp_modem_change_wait);
|
|
priv->dp_transmit_idle = 0;
|
|
init_waitqueue_head(&priv->dp_transmit_idle_wait);
|
|
priv->dp_throttled = 0;
|
|
priv->dp_throttle_restart = 0;
|
|
init_waitqueue_head(&priv->dp_flush_wait);
|
|
init_waitqueue_head(&priv->dp_close_wait);
|
|
INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
|
|
priv->dp_port = serial->port[i];
|
|
/* initialize write wait queue for this port */
|
|
init_waitqueue_head(&serial->port[i]->write_wait);
|
|
|
|
usb_set_serial_port_data(serial->port[i], priv);
|
|
}
|
|
|
|
/* allocate serial private structure */
|
|
serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL);
|
|
if (serial_priv == NULL) {
|
|
for (i = 0; i < serial->type->num_ports + 1; i++)
|
|
kfree(usb_get_serial_port_data(serial->port[i]));
|
|
return 1; /* error */
|
|
}
|
|
|
|
/* initialize serial private structure */
|
|
spin_lock_init(&serial_priv->ds_serial_lock);
|
|
serial_priv->ds_oob_port_num = serial->type->num_ports;
|
|
serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
|
|
serial_priv->ds_device_started = 0;
|
|
usb_set_serial_data(serial, serial_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void digi_disconnect(struct usb_serial *serial)
|
|
{
|
|
int i;
|
|
dbg("digi_disconnect: TOP, in_interrupt()=%ld", in_interrupt());
|
|
|
|
/* stop reads and writes on all ports */
|
|
for (i = 0; i < serial->type->num_ports + 1; i++) {
|
|
usb_kill_urb(serial->port[i]->read_urb);
|
|
usb_kill_urb(serial->port[i]->write_urb);
|
|
}
|
|
}
|
|
|
|
|
|
static void digi_release(struct usb_serial *serial)
|
|
{
|
|
int i;
|
|
dbg("digi_release: TOP, in_interrupt()=%ld", in_interrupt());
|
|
|
|
/* free the private data structures for all ports */
|
|
/* number of regular ports + 1 for the out-of-band port */
|
|
for (i = 0; i < serial->type->num_ports + 1; i++)
|
|
kfree(usb_get_serial_port_data(serial->port[i]));
|
|
kfree(usb_get_serial_data(serial));
|
|
}
|
|
|
|
|
|
static void digi_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port = urb->context;
|
|
struct digi_port *priv;
|
|
struct digi_serial *serial_priv;
|
|
int ret;
|
|
int status = urb->status;
|
|
|
|
dbg("digi_read_bulk_callback: TOP");
|
|
|
|
/* port sanity check, do not resubmit if port is not valid */
|
|
if (port == NULL)
|
|
return;
|
|
priv = usb_get_serial_port_data(port);
|
|
if (priv == NULL) {
|
|
dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
|
|
__func__, status);
|
|
return;
|
|
}
|
|
if (port->serial == NULL ||
|
|
(serial_priv = usb_get_serial_data(port->serial)) == NULL) {
|
|
dev_err(&port->dev, "%s: serial is bad or serial->private "
|
|
"is NULL, status=%d\n", __func__, status);
|
|
return;
|
|
}
|
|
|
|
/* do not resubmit urb if it has any status error */
|
|
if (status) {
|
|
dev_err(&port->dev,
|
|
"%s: nonzero read bulk status: status=%d, port=%d\n",
|
|
__func__, status, priv->dp_port_num);
|
|
return;
|
|
}
|
|
|
|
/* handle oob or inb callback, do not resubmit if error */
|
|
if (priv->dp_port_num == serial_priv->ds_oob_port_num) {
|
|
if (digi_read_oob_callback(urb) != 0)
|
|
return;
|
|
} else {
|
|
if (digi_read_inb_callback(urb) != 0)
|
|
return;
|
|
}
|
|
|
|
/* continue read */
|
|
ret = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (ret != 0 && ret != -EPERM) {
|
|
dev_err(&port->dev,
|
|
"%s: failed resubmitting urb, ret=%d, port=%d\n",
|
|
__func__, ret, priv->dp_port_num);
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* Digi Read INB Callback
|
|
*
|
|
* Digi Read INB Callback handles reads on the in band ports, sending
|
|
* the data on to the tty subsystem. When called we know port and
|
|
* port->private are not NULL and port->serial has been validated.
|
|
* It returns 0 if successful, 1 if successful but the port is
|
|
* throttled, and -1 if the sanity checks failed.
|
|
*/
|
|
|
|
static int digi_read_inb_callback(struct urb *urb)
|
|
{
|
|
|
|
struct usb_serial_port *port = urb->context;
|
|
struct tty_struct *tty;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
int opcode = ((unsigned char *)urb->transfer_buffer)[0];
|
|
int len = ((unsigned char *)urb->transfer_buffer)[1];
|
|
int port_status = ((unsigned char *)urb->transfer_buffer)[2];
|
|
unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
|
|
int flag, throttled;
|
|
int status = urb->status;
|
|
|
|
/* do not process callbacks on closed ports */
|
|
/* but do continue the read chain */
|
|
if (urb->status == -ENOENT)
|
|
return 0;
|
|
|
|
/* short/multiple packet check */
|
|
if (urb->actual_length != len + 2) {
|
|
dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
|
|
"status=%d, port=%d, opcode=%d, len=%d, "
|
|
"actual_length=%d, status=%d\n", __func__, status,
|
|
priv->dp_port_num, opcode, len, urb->actual_length,
|
|
port_status);
|
|
return -1;
|
|
}
|
|
|
|
tty = tty_port_tty_get(&port->port);
|
|
spin_lock(&priv->dp_port_lock);
|
|
|
|
/* check for throttle; if set, do not resubmit read urb */
|
|
/* indicate the read chain needs to be restarted on unthrottle */
|
|
throttled = priv->dp_throttled;
|
|
if (throttled)
|
|
priv->dp_throttle_restart = 1;
|
|
|
|
/* receive data */
|
|
if (tty && opcode == DIGI_CMD_RECEIVE_DATA) {
|
|
/* get flag from port_status */
|
|
flag = 0;
|
|
|
|
/* overrun is special, not associated with a char */
|
|
if (port_status & DIGI_OVERRUN_ERROR)
|
|
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
|
|
|
|
/* break takes precedence over parity, */
|
|
/* which takes precedence over framing errors */
|
|
if (port_status & DIGI_BREAK_ERROR)
|
|
flag = TTY_BREAK;
|
|
else if (port_status & DIGI_PARITY_ERROR)
|
|
flag = TTY_PARITY;
|
|
else if (port_status & DIGI_FRAMING_ERROR)
|
|
flag = TTY_FRAME;
|
|
|
|
/* data length is len-1 (one byte of len is port_status) */
|
|
--len;
|
|
if (len > 0) {
|
|
tty_insert_flip_string_fixed_flag(tty, data, flag,
|
|
len);
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
}
|
|
spin_unlock(&priv->dp_port_lock);
|
|
tty_kref_put(tty);
|
|
|
|
if (opcode == DIGI_CMD_RECEIVE_DISABLE)
|
|
dbg("%s: got RECEIVE_DISABLE", __func__);
|
|
else if (opcode != DIGI_CMD_RECEIVE_DATA)
|
|
dbg("%s: unknown opcode: %d", __func__, opcode);
|
|
|
|
return throttled ? 1 : 0;
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* Digi Read OOB Callback
|
|
*
|
|
* Digi Read OOB Callback handles reads on the out of band port.
|
|
* When called we know port and port->private are not NULL and
|
|
* the port->serial is valid. It returns 0 if successful, and
|
|
* -1 if the sanity checks failed.
|
|
*/
|
|
|
|
static int digi_read_oob_callback(struct urb *urb)
|
|
{
|
|
|
|
struct usb_serial_port *port = urb->context;
|
|
struct usb_serial *serial = port->serial;
|
|
struct tty_struct *tty;
|
|
struct digi_port *priv = usb_get_serial_port_data(port);
|
|
int opcode, line, status, val;
|
|
int i;
|
|
unsigned int rts;
|
|
|
|
dbg("digi_read_oob_callback: port=%d, len=%d",
|
|
priv->dp_port_num, urb->actual_length);
|
|
|
|
/* handle each oob command */
|
|
for (i = 0; i < urb->actual_length - 3;) {
|
|
opcode = ((unsigned char *)urb->transfer_buffer)[i++];
|
|
line = ((unsigned char *)urb->transfer_buffer)[i++];
|
|
status = ((unsigned char *)urb->transfer_buffer)[i++];
|
|
val = ((unsigned char *)urb->transfer_buffer)[i++];
|
|
|
|
dbg("digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d",
|
|
opcode, line, status, val);
|
|
|
|
if (status != 0 || line >= serial->type->num_ports)
|
|
continue;
|
|
|
|
port = serial->port[line];
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
if (priv == NULL)
|
|
return -1;
|
|
|
|
tty = tty_port_tty_get(&port->port);
|
|
|
|
rts = 0;
|
|
if (tty)
|
|
rts = tty->termios->c_cflag & CRTSCTS;
|
|
|
|
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
|
|
spin_lock(&priv->dp_port_lock);
|
|
/* convert from digi flags to termiox flags */
|
|
if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
|
|
priv->dp_modem_signals |= TIOCM_CTS;
|
|
/* port must be open to use tty struct */
|
|
if (rts) {
|
|
tty->hw_stopped = 0;
|
|
digi_wakeup_write(port);
|
|
}
|
|
} else {
|
|
priv->dp_modem_signals &= ~TIOCM_CTS;
|
|
/* port must be open to use tty struct */
|
|
if (rts)
|
|
tty->hw_stopped = 1;
|
|
}
|
|
if (val & DIGI_READ_INPUT_SIGNALS_DSR)
|
|
priv->dp_modem_signals |= TIOCM_DSR;
|
|
else
|
|
priv->dp_modem_signals &= ~TIOCM_DSR;
|
|
if (val & DIGI_READ_INPUT_SIGNALS_RI)
|
|
priv->dp_modem_signals |= TIOCM_RI;
|
|
else
|
|
priv->dp_modem_signals &= ~TIOCM_RI;
|
|
if (val & DIGI_READ_INPUT_SIGNALS_DCD)
|
|
priv->dp_modem_signals |= TIOCM_CD;
|
|
else
|
|
priv->dp_modem_signals &= ~TIOCM_CD;
|
|
|
|
wake_up_interruptible(&priv->dp_modem_change_wait);
|
|
spin_unlock(&priv->dp_port_lock);
|
|
} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
|
|
spin_lock(&priv->dp_port_lock);
|
|
priv->dp_transmit_idle = 1;
|
|
wake_up_interruptible(&priv->dp_transmit_idle_wait);
|
|
spin_unlock(&priv->dp_port_lock);
|
|
} else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
|
|
wake_up_interruptible(&priv->dp_flush_wait);
|
|
}
|
|
tty_kref_put(tty);
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
module_usb_serial_driver(digi_driver, serial_drivers);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug enabled or not");
|