1
0
Fork 0
remarkable-linux/drivers/mmc/core
Ziyuan Xu 1712c9373f mmc: core: don't try to switch block size for dual rate mode
Per spec, block size should always be 512 bytes for dual rate mode,
so any attempts to switch the block size under dual rate mode should
be neglected.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26 21:31:34 +02:00
..
Kconfig mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
Makefile mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
bus.c mmc: core: implement enhanced strobe support 2016-07-25 10:34:05 +02:00
bus.h mmc: rename dev_to_mmc_card() to mmc_dev_to_card() 2010-10-23 21:11:12 +08:00
core.c mmc: core: don't try to switch block size for dual rate mode 2016-09-26 21:31:34 +02:00
core.h mmc: fix mmc_{un,}register_pm_notifier prototypes 2015-12-22 11:32:09 +01:00
debugfs.c mmc: debugfs: add HS400 enhanced strobe description 2016-07-25 10:34:06 +02:00
host.c mmc: core: expose MMC_CAP2_NO_* to dt 2016-07-25 10:34:49 +02:00
host.h mmc: host: Add facility to support re-tuning 2015-06-01 09:06:53 +02:00
mmc.c mmc: core: Add error message when switching fails in mmc_select_hs() 2016-09-26 21:31:14 +02:00
mmc_ops.c mmc: mmc: fix switch timeout issue caused by jiffies precision 2016-07-25 10:34:09 +02:00
mmc_ops.h mmc: core: Convert __mmc_switch() into an internal core function 2015-10-26 15:59:54 +01:00
pwrseq.c mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
pwrseq.h mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
pwrseq_emmc.c mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
pwrseq_simple.c mmc: pwrseq-simple: Add an optional post-power-on-delay 2016-09-26 21:31:07 +02:00
quirks.c mmc: core: Disable HPI for certain Hynix eMMC cards 2016-07-25 10:34:12 +02:00
sd.c mmc: sd: Export SD Status via “ssr” device attribute 2016-09-26 21:31:09 +02:00
sd.h mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sd_ops.c mmc: remove unnecessary assignment statements before return 2016-02-29 11:02:47 +01:00
sd_ops.h mmc: add erase, secure erase, trim and secure trim operations 2010-08-12 08:43:30 -07:00
sdio.c mmc: core: remove redundant memset of sdio_read_cccr 2016-03-17 14:54:41 +01:00
sdio_bus.c mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously 2015-12-22 11:32:16 +01:00
sdio_bus.h mmc: basic SDIO device model 2007-09-23 19:45:31 +02:00
sdio_cis.c mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cards 2016-05-16 11:31:27 +02:00
sdio_cis.h sdio: split up common and function CIS parsing 2007-09-23 20:44:22 +02:00
sdio_io.c mmc: sdio: deploy error handling instead of triggering BUG_ON 2016-09-26 21:31:15 +02:00
sdio_irq.c mmc: core: Remove MMC_CLKGATE 2015-10-26 16:00:09 +01:00
sdio_ops.c mmc: sdio: deploy error handling instead of triggering BUG_ON 2016-09-26 21:31:15 +02:00
sdio_ops.h mmc: Add mmc_is_io_op helper function 2015-10-26 16:00:01 +01:00
slot-gpio.c mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts 2015-01-19 09:56:29 +01:00
slot-gpio.h mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core 2015-01-19 09:56:17 +01:00