![Douglas Anderson](/assets/img/avatar_default.png)
Some SD/eMMC PHYs (like the PHY from Arasan that is designed to work with arasan,sdhci-5.1) need to know the card clock in order to function properly. Let's add the ability to expose this clock. Any PHY that needs to know the clock rate can add a reference and query the clock rate. At the moment we register a CLK_GET_RATE_NOCACHE clock that simply allows querying the clock. This allows us to be less intrusive with regards to the main SDHCI driver, which has complex logic for adjusting the SD clock. Right now we always fully power cycle the PHY when the clock changes and that gives the PHY a good chance to query our clock. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
801 lines
24 KiB
Plaintext
801 lines
24 KiB
Plaintext
#
|
|
# MMC/SD host controller drivers
|
|
#
|
|
|
|
comment "MMC/SD/SDIO Host Controller Drivers"
|
|
|
|
config MMC_ARMMMCI
|
|
tristate "ARM AMBA Multimedia Card Interface support"
|
|
depends on ARM_AMBA
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
|
|
Interface (PL180 and PL181) support. If you have an ARM(R)
|
|
platform with a Multimedia Card slot, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_QCOM_DML
|
|
tristate "Qualcomm Data Mover for SD Card Controller"
|
|
depends on MMC_ARMMMCI && QCOM_BAM_DMA
|
|
default y
|
|
help
|
|
This selects the Qualcomm Data Mover lite/local on SD Card controller.
|
|
This option will enable the dma to work correctly, if you are using
|
|
Qcom SOCs and MMC, you would probably need this option to get DMA working.
|
|
|
|
if unsure, say N.
|
|
|
|
config MMC_PXA
|
|
tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
|
|
depends on ARCH_PXA
|
|
help
|
|
This selects the Intel(R) PXA(R) Multimedia card Interface.
|
|
If you have a PXA(R) platform with a Multimedia Card slot,
|
|
say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI
|
|
tristate "Secure Digital Host Controller Interface support"
|
|
depends on HAS_DMA
|
|
help
|
|
This selects the generic Secure Digital Host Controller Interface.
|
|
It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
|
|
and Toshiba(R). Most controllers found in laptops are of this type.
|
|
|
|
If you have a controller with this interface, say Y or M here. You
|
|
also need to enable an appropriate bus interface.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_IO_ACCESSORS
|
|
bool
|
|
depends on MMC_SDHCI
|
|
help
|
|
This is silent Kconfig symbol that is selected by the drivers that
|
|
need to overwrite SDHCI IO memory accessors.
|
|
|
|
config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
|
|
bool
|
|
depends on MMC_SDHCI
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This option is selected by drivers running on big endian hosts
|
|
and performing I/O to a SDHCI controller through a bus that
|
|
implements a hardware byte swapper using a 32-bit datum.
|
|
This endian mapping mode is called "data invariance" and
|
|
has the effect of scrambling the addresses and formats of data
|
|
accessed in sizes other than the datum size.
|
|
|
|
This is the case for the Nintendo Wii SDHCI.
|
|
|
|
config MMC_SDHCI_PCI
|
|
tristate "SDHCI support on PCI bus"
|
|
depends on MMC_SDHCI && PCI
|
|
help
|
|
This selects the PCI Secure Digital Host Controller Interface.
|
|
Most controllers found today are PCI devices.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_RICOH_MMC
|
|
bool "Ricoh MMC Controller Disabler"
|
|
depends on MMC_SDHCI_PCI
|
|
default y
|
|
help
|
|
This adds a pci quirk to disable Ricoh MMC Controller. This
|
|
proprietary controller is unnecessary because the SDHCI driver
|
|
supports MMC cards on the SD controller, but if it is not
|
|
disabled, it will steal the MMC cards away - rendering them
|
|
useless. It is safe to select this even if you don't
|
|
have a Ricoh based card reader.
|
|
|
|
If unsure, say Y.
|
|
|
|
config MMC_SDHCI_ACPI
|
|
tristate "SDHCI support for ACPI enumerated SDHCI controllers"
|
|
depends on MMC_SDHCI && ACPI
|
|
select IOSF_MBI if X86
|
|
help
|
|
This selects support for ACPI enumerated SDHCI controllers,
|
|
identified by ACPI Compatibility ID PNP0D40 or specific
|
|
ACPI Hardware IDs.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_PLTFM
|
|
tristate "SDHCI platform and OF driver helper"
|
|
depends on MMC_SDHCI
|
|
help
|
|
This selects the common helper functions support for Secure Digital
|
|
Host Controller Interface based platform and OF drivers.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_OF_ARASAN
|
|
tristate "SDHCI OF support for the Arasan SDHCI controllers"
|
|
depends on MMC_SDHCI_PLTFM
|
|
depends on OF
|
|
depends on COMMON_CLK
|
|
help
|
|
This selects the Arasan Secure Digital Host Controller Interface
|
|
(SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_OF_AT91
|
|
tristate "SDHCI OF support for the Atmel SDMMC controller"
|
|
depends on MMC_SDHCI_PLTFM
|
|
depends on OF
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the Atmel SDMMC driver
|
|
|
|
config MMC_SDHCI_OF_ESDHC
|
|
tristate "SDHCI OF support for the Freescale eSDHC controller"
|
|
depends on MMC_SDHCI_PLTFM
|
|
depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the Freescale eSDHC controller support.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_OF_HLWD
|
|
tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
|
|
depends on MMC_SDHCI_PLTFM
|
|
depends on PPC
|
|
select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
|
|
help
|
|
This selects the Secure Digital Host Controller Interface (SDHCI)
|
|
found in the "Hollywood" chipset of the Nintendo Wii video game
|
|
console.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_CNS3XXX
|
|
tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
|
|
depends on ARCH_CNS3XXX
|
|
depends on MMC_SDHCI_PLTFM
|
|
help
|
|
This selects the SDHCI support for CNS3xxx System-on-Chip devices.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_ESDHC_IMX
|
|
tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
|
|
depends on ARCH_MXC
|
|
depends on MMC_SDHCI_PLTFM
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the Freescale eSDHC/uSDHC controller support
|
|
found on i.MX25, i.MX35 i.MX5x and i.MX6x.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_DOVE
|
|
tristate "SDHCI support on Marvell's Dove SoC"
|
|
depends on ARCH_DOVE || MACH_DOVE
|
|
depends on MMC_SDHCI_PLTFM
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the Secure Digital Host Controller Interface in
|
|
Marvell's Dove SoC.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_TEGRA
|
|
tristate "SDHCI platform support for the Tegra SD/MMC Controller"
|
|
depends on ARCH_TEGRA
|
|
depends on MMC_SDHCI_PLTFM
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the Tegra SD/MMC controller. If you have a Tegra
|
|
platform with SD or MMC devices, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_S3C
|
|
tristate "SDHCI support on Samsung S3C SoC"
|
|
depends on MMC_SDHCI && PLAT_SAMSUNG
|
|
help
|
|
This selects the Secure Digital Host Controller Interface (SDHCI)
|
|
often referrered to as the HSMMC block in some of the Samsung S3C
|
|
range of SoC.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_SIRF
|
|
tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
|
|
depends on ARCH_SIRF
|
|
depends on MMC_SDHCI_PLTFM
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the SDHCI support for SiRF System-on-Chip devices.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_PXAV3
|
|
tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
|
|
depends on CLKDEV_LOOKUP
|
|
depends on MMC_SDHCI_PLTFM
|
|
depends on ARCH_BERLIN || ARCH_MMP || ARCH_MVEBU || COMPILE_TEST
|
|
default CPU_MMP2
|
|
help
|
|
This selects the Marvell(R) PXAV3 SD Host Controller.
|
|
If you have a MMP2 platform with SD Host Controller
|
|
and a card slot, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_PXAV2
|
|
tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
|
|
depends on CLKDEV_LOOKUP
|
|
depends on MMC_SDHCI_PLTFM
|
|
depends on ARCH_MMP || COMPILE_TEST
|
|
default CPU_PXA910
|
|
help
|
|
This selects the Marvell(R) PXAV2 SD Host Controller.
|
|
If you have a PXA9XX platform with SD Host Controller
|
|
and a card slot, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_SPEAR
|
|
tristate "SDHCI support on ST SPEAr platform"
|
|
depends on MMC_SDHCI && PLAT_SPEAR
|
|
depends on OF
|
|
help
|
|
This selects the Secure Digital Host Controller Interface (SDHCI)
|
|
often referrered to as the HSMMC block in some of the ST SPEAR range
|
|
of SoC
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_S3C_DMA
|
|
bool "DMA support on S3C SDHCI"
|
|
depends on MMC_SDHCI_S3C
|
|
help
|
|
Enable DMA support on the Samsung S3C SDHCI glue. The DMA
|
|
has proved to be problematic if the controller encounters
|
|
certain errors, and thus should be treated with care.
|
|
|
|
YMMV.
|
|
|
|
config MMC_SDHCI_BCM_KONA
|
|
tristate "SDHCI support on Broadcom KONA platform"
|
|
depends on ARCH_BCM_MOBILE
|
|
depends on MMC_SDHCI_PLTFM
|
|
help
|
|
This selects the Broadcom Kona Secure Digital Host Controller
|
|
Interface(SDHCI) support.
|
|
This is used in Broadcom mobile SoCs.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
config MMC_SDHCI_F_SDH30
|
|
tristate "SDHCI support for Fujitsu Semiconductor F_SDH30"
|
|
depends on MMC_SDHCI_PLTFM
|
|
depends on OF
|
|
help
|
|
This selects the Secure Digital Host Controller Interface (SDHCI)
|
|
Needed by some Fujitsu SoC for MMC / SD / SDIO support.
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_IPROC
|
|
tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
|
|
depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
|
|
depends on MMC_SDHCI_PLTFM
|
|
default ARCH_BCM_IPROC
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the iProc SD/MMC controller.
|
|
|
|
If you have a BCM2835 or IPROC platform with SD or MMC devices,
|
|
say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_MOXART
|
|
tristate "MOXART SD/MMC Host Controller support"
|
|
depends on ARCH_MOXART && MMC
|
|
help
|
|
This selects support for the MOXART SD/MMC Host Controller.
|
|
MOXA provides one multi-functional card reader which can
|
|
be found on some embedded hardware such as UC-7112-LX.
|
|
If you have a controller with this interface, say Y here.
|
|
|
|
config MMC_SDHCI_ST
|
|
tristate "SDHCI support on STMicroelectronics SoC"
|
|
depends on ARCH_STI
|
|
depends on MMC_SDHCI_PLTFM
|
|
select MMC_SDHCI_IO_ACCESSORS
|
|
help
|
|
This selects the Secure Digital Host Controller Interface in
|
|
STMicroelectronics SoCs.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
If unsure, say N.
|
|
|
|
config MMC_OMAP
|
|
tristate "TI OMAP Multimedia Card Interface support"
|
|
depends on ARCH_OMAP
|
|
depends on TPS65010 || !MACH_OMAP_H2
|
|
help
|
|
This selects the TI OMAP Multimedia card Interface.
|
|
If you have an OMAP board with a Multimedia Card slot,
|
|
say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_OMAP_HS
|
|
tristate "TI OMAP High Speed Multimedia Card Interface support"
|
|
depends on HAS_DMA
|
|
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
|
|
help
|
|
This selects the TI OMAP High Speed Multimedia card Interface.
|
|
If you have an omap2plus board with a Multimedia Card slot,
|
|
say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_WBSD
|
|
tristate "Winbond W83L51xD SD/MMC Card Interface support"
|
|
depends on ISA_DMA_API
|
|
help
|
|
This selects the Winbond(R) W83L51xD Secure digital and
|
|
Multimedia card Interface.
|
|
If you have a machine with a integrated W83L518D or W83L519D
|
|
SD/MMC card reader, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_AU1X
|
|
tristate "Alchemy AU1XX0 MMC Card Interface support"
|
|
depends on MIPS_ALCHEMY
|
|
help
|
|
This selects the AMD Alchemy(R) Multimedia card interface.
|
|
If you have a Alchemy platform with a MMC slot, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_ATMELMCI
|
|
tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
|
|
depends on AVR32 || ARCH_AT91
|
|
help
|
|
This selects the Atmel Multimedia Card Interface driver. If
|
|
you have an AT32 (AVR32) or AT91 platform with a Multimedia
|
|
Card slot, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_MSM
|
|
tristate "Qualcomm SDHCI Controller Support"
|
|
depends on ARCH_QCOM || (ARM && COMPILE_TEST)
|
|
depends on MMC_SDHCI_PLTFM
|
|
help
|
|
This selects the Secure Digital Host Controller Interface (SDHCI)
|
|
support present in Qualcomm SOCs. The controller supports
|
|
SD/MMC/SDIO devices.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_MXC
|
|
tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
|
|
depends on ARCH_MXC || PPC_MPC512x
|
|
help
|
|
This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
|
|
Multimedia Card Interface. If you have an i.MX or MPC512x platform
|
|
with a Multimedia Card slot, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_MXS
|
|
tristate "Freescale MXS Multimedia Card Interface support"
|
|
depends on ARCH_MXS && MXS_DMA
|
|
help
|
|
This selects the Freescale SSP MMC controller found on MXS based
|
|
platforms like mx23/28.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_TIFM_SD
|
|
tristate "TI Flash Media MMC/SD Interface support"
|
|
depends on PCI
|
|
select TIFM_CORE
|
|
help
|
|
Say Y here if you want to be able to access MMC/SD cards with
|
|
the Texas Instruments(R) Flash Media card reader, found in many
|
|
laptops.
|
|
This option 'selects' (turns on, enables) 'TIFM_CORE', but you
|
|
probably also need appropriate card reader host adapter, such as
|
|
'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
|
|
(TIFM_7XX1)'.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tifm_sd.
|
|
|
|
config MMC_MVSDIO
|
|
tristate "Marvell MMC/SD/SDIO host driver"
|
|
depends on PLAT_ORION
|
|
depends on OF
|
|
---help---
|
|
This selects the Marvell SDIO host driver.
|
|
SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
|
|
SoC controllers.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mvsdio.
|
|
|
|
config MMC_DAVINCI
|
|
tristate "TI DAVINCI Multimedia Card Interface support"
|
|
depends on ARCH_DAVINCI
|
|
help
|
|
This selects the TI DAVINCI Multimedia card Interface.
|
|
If you have an DAVINCI board with a Multimedia Card slot,
|
|
say Y or M here. If unsure, say N.
|
|
|
|
config MMC_GOLDFISH
|
|
tristate "goldfish qemu Multimedia Card Interface support"
|
|
depends on HAS_DMA
|
|
depends on GOLDFISH || COMPILE_TEST
|
|
help
|
|
This selects the Goldfish Multimedia card Interface emulation
|
|
found on the Goldfish Android virtual device emulation.
|
|
|
|
config MMC_SPI
|
|
tristate "MMC/SD/SDIO over SPI"
|
|
depends on SPI_MASTER && !HIGHMEM && HAS_DMA
|
|
select CRC7
|
|
select CRC_ITU_T
|
|
help
|
|
Some systems access MMC/SD/SDIO cards using a SPI controller
|
|
instead of using a "native" MMC/SD/SDIO controller. This has a
|
|
disadvantage of being relatively high overhead, but a compensating
|
|
advantage of working on many systems without dedicated MMC/SD/SDIO
|
|
controllers.
|
|
|
|
If unsure, or if your system has no SPI master driver, say N.
|
|
|
|
config MMC_S3C
|
|
tristate "Samsung S3C SD/MMC Card Interface support"
|
|
depends on ARCH_S3C24XX
|
|
depends on S3C24XX_DMAC
|
|
help
|
|
This selects a driver for the MCI interface found in
|
|
Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
|
|
If you have a board based on one of those and a MMC/SD
|
|
slot, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_S3C_HW_SDIO_IRQ
|
|
bool "Hardware support for SDIO IRQ"
|
|
depends on MMC_S3C
|
|
help
|
|
Enable the hardware support for SDIO interrupts instead of using
|
|
the generic polling code.
|
|
|
|
choice
|
|
prompt "Samsung S3C SD/MMC transfer code"
|
|
depends on MMC_S3C
|
|
|
|
config MMC_S3C_PIO
|
|
bool "Use PIO transfers only"
|
|
help
|
|
Use PIO to transfer data between memory and the hardware.
|
|
|
|
PIO is slower than DMA as it requires CPU instructions to
|
|
move the data. This has been the traditional default for
|
|
the S3C MCI driver.
|
|
|
|
config MMC_S3C_DMA
|
|
bool "Use DMA transfers only"
|
|
help
|
|
Use DMA to transfer data between memory and the hardare.
|
|
|
|
Currently, the DMA support in this driver seems to not be
|
|
working properly and needs to be debugged before this
|
|
option is useful.
|
|
|
|
endchoice
|
|
|
|
config MMC_SDRICOH_CS
|
|
tristate "MMC/SD driver for Ricoh Bay1Controllers"
|
|
depends on PCI && PCMCIA
|
|
help
|
|
Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
|
|
card whenever you insert a MMC or SD card into the card slot.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sdricoh_cs.
|
|
|
|
config MMC_TMIO_CORE
|
|
tristate
|
|
|
|
config MMC_TMIO
|
|
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
|
|
depends on MFD_TMIO || MFD_ASIC3
|
|
select MMC_TMIO_CORE
|
|
help
|
|
This provides support for the SD/MMC cell found in TC6393XB,
|
|
T7L66XB and also HTC ASIC3
|
|
|
|
config MMC_SDHI
|
|
tristate "SH-Mobile SDHI SD/SDIO controller support"
|
|
depends on SUPERH || ARM || ARM64
|
|
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
|
|
select MMC_TMIO_CORE
|
|
help
|
|
This provides support for the SDHI SD/SDIO controller found in
|
|
SuperH and ARM SH-Mobile SoCs
|
|
|
|
config MMC_CB710
|
|
tristate "ENE CB710 MMC/SD Interface support"
|
|
depends on PCI
|
|
select CB710_CORE
|
|
help
|
|
This option enables support for MMC/SD part of ENE CB710/720 Flash
|
|
memory card reader found in some laptops (ie. some versions of
|
|
HP Compaq nx9500).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called cb710-mmc.
|
|
|
|
config MMC_VIA_SDMMC
|
|
tristate "VIA SD/MMC Card Reader Driver"
|
|
depends on PCI
|
|
help
|
|
This selects the VIA SD/MMC Card Reader driver, say Y or M here.
|
|
VIA provides one multi-functional card reader which integrated into
|
|
some motherboards manufactured by VIA. This card reader supports
|
|
SD/MMC/SDHC.
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config SDH_BFIN
|
|
tristate "Blackfin Secure Digital Host support"
|
|
depends on (BF54x && !BF544) || (BF51x && !BF512)
|
|
help
|
|
If you say yes here you will get support for the Blackfin on-chip
|
|
Secure Digital Host interface. This includes support for MMC and
|
|
SD cards.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bfin_sdh.
|
|
|
|
If unsure, say N.
|
|
|
|
config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
|
|
bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
|
|
depends on SDH_BFIN
|
|
help
|
|
If you say yes here SD-Cards may work on the EZkit.
|
|
|
|
config MMC_DW
|
|
tristate "Synopsys DesignWare Memory Card Interface"
|
|
depends on HAS_DMA
|
|
depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
|
|
help
|
|
This selects support for the Synopsys DesignWare Mobile Storage IP
|
|
block, this provides host support for SD and MMC interfaces, in both
|
|
PIO, internal DMA mode and external DMA mode.
|
|
|
|
config MMC_DW_PLTFM
|
|
tristate "Synopsys Designware MCI Support as platform device"
|
|
depends on MMC_DW
|
|
default y
|
|
help
|
|
This selects the common helper functions support for Host Controller
|
|
Interface based platform driver. Please select this option if the IP
|
|
is present as a platform device. This is the common interface for the
|
|
Synopsys Designware IP.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say Y.
|
|
|
|
config MMC_DW_EXYNOS
|
|
tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
|
|
depends on MMC_DW
|
|
select MMC_DW_PLTFM
|
|
help
|
|
This selects support for Samsung Exynos SoC specific extensions to the
|
|
Synopsys DesignWare Memory Card Interface driver. Select this option
|
|
for platforms based on Exynos4 and Exynos5 SoC's.
|
|
|
|
config MMC_DW_K3
|
|
tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
|
|
depends on MMC_DW
|
|
select MMC_DW_PLTFM
|
|
help
|
|
This selects support for Hisilicon K3 SoC specific extensions to the
|
|
Synopsys DesignWare Memory Card Interface driver. Select this option
|
|
for platforms based on Hisilicon K3 SoC's.
|
|
|
|
config MMC_DW_PCI
|
|
tristate "Synopsys Designware MCI support on PCI bus"
|
|
depends on MMC_DW && PCI
|
|
help
|
|
This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
|
|
Select this option if the IP is present on PCI platform.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
|
|
config MMC_DW_ROCKCHIP
|
|
tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface"
|
|
depends on MMC_DW && ARCH_ROCKCHIP
|
|
select MMC_DW_PLTFM
|
|
help
|
|
This selects support for Rockchip SoC specific extensions to the
|
|
Synopsys DesignWare Memory Card Interface driver. Select this option
|
|
for platforms based on RK3066, RK3188 and RK3288 SoC's.
|
|
|
|
config MMC_SH_MMCIF
|
|
tristate "SuperH Internal MMCIF support"
|
|
depends on HAS_DMA
|
|
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
|
|
help
|
|
This selects the MMC Host Interface controller (MMCIF) found in various
|
|
Renesas SoCs for SH and ARM architectures.
|
|
|
|
|
|
config MMC_JZ4740
|
|
tristate "JZ4740 SD/Multimedia Card Interface support"
|
|
depends on MACH_JZ4740
|
|
help
|
|
This selects support for the SD/MMC controller on Ingenic JZ4740
|
|
SoCs.
|
|
If you have a board based on such a SoC and with a SD/MMC slot,
|
|
say Y or M here.
|
|
|
|
config MMC_VUB300
|
|
tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
|
|
depends on USB
|
|
help
|
|
This selects support for Elan Digital Systems' VUB300 chip.
|
|
|
|
The VUB300 is a USB-SDIO Host Controller Interface chip
|
|
that enables the host computer to use SDIO/SD/MMC cards
|
|
via a USB 2.0 or USB 1.1 host.
|
|
|
|
The VUB300 chip will be found in both physically separate
|
|
USB to SDIO/SD/MMC adapters and embedded on some motherboards.
|
|
|
|
The VUB300 chip supports SD and MMC memory cards in addition
|
|
to single and multifunction SDIO cards.
|
|
|
|
Some SDIO cards will need a firmware file to be loaded and
|
|
sent to VUB300 chip in order to achieve better data throughput.
|
|
Download these "Offload Pseudocode" from Elan Digital Systems'
|
|
web-site http://www.elandigitalsystems.com/support/downloads.php
|
|
and put them in /lib/firmware. Note that without these additional
|
|
firmware files the VUB300 chip will still function, but not at
|
|
the best obtainable data rate.
|
|
|
|
To compile this mmc host controller driver as a module,
|
|
choose M here: the module will be called vub300.
|
|
|
|
If you have a computer with an embedded VUB300 chip
|
|
or if you intend connecting a USB adapter based on a
|
|
VUB300 chip say Y or M here.
|
|
|
|
config MMC_USHC
|
|
tristate "USB SD Host Controller (USHC) support"
|
|
depends on USB
|
|
help
|
|
This selects support for USB SD Host Controllers based on
|
|
the Cypress Astoria chip with firmware compliant with CSR's
|
|
USB SD Host Controller specification (CS-118793-SP).
|
|
|
|
CSR boards with this device include: USB<>SDIO (M1985v2),
|
|
and Ultrasira.
|
|
|
|
Note: These controllers only support SDIO cards and do not
|
|
support MMC or SD memory cards.
|
|
|
|
config MMC_WMT
|
|
tristate "Wondermedia SD/MMC Host Controller support"
|
|
depends on ARCH_VT8500
|
|
default y
|
|
help
|
|
This selects support for the SD/MMC Host Controller on
|
|
Wondermedia WM8505/WM8650 based SoCs.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wmt-sdmmc.
|
|
|
|
config MMC_USDHI6ROL0
|
|
tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
|
|
depends on HAS_DMA
|
|
help
|
|
This selects support for the Renesas USDHI6ROL0 SD/SDIO
|
|
Host Controller
|
|
|
|
config MMC_REALTEK_PCI
|
|
tristate "Realtek PCI-E SD/MMC Card Interface Driver"
|
|
depends on MFD_RTSX_PCI
|
|
help
|
|
Say Y here to include driver code to support SD/MMC card interface
|
|
of Realtek PCI-E card reader
|
|
|
|
config MMC_REALTEK_USB
|
|
tristate "Realtek USB SD/MMC Card Interface Driver"
|
|
depends on MFD_RTSX_USB
|
|
help
|
|
Say Y here to include driver code to support SD/MMC card interface
|
|
of Realtek RTS5129/39 series card reader
|
|
|
|
config MMC_SUNXI
|
|
tristate "Allwinner sunxi SD/MMC Host Controller support"
|
|
depends on ARCH_SUNXI
|
|
help
|
|
This selects support for the SD/MMC Host Controller on
|
|
Allwinner sunxi SoCs.
|
|
|
|
config MMC_TOSHIBA_PCI
|
|
tristate "Toshiba Type A SD/MMC Card Interface Driver"
|
|
depends on PCI
|
|
help
|
|
|
|
config MMC_MTK
|
|
tristate "MediaTek SD/MMC Card Interface support"
|
|
depends on HAS_DMA
|
|
help
|
|
This selects the MediaTek(R) Secure digital and Multimedia card Interface.
|
|
If you have a machine with a integrated SD/MMC card reader, say Y or M here.
|
|
This is needed if support for any SD/SDIO/MMC devices is required.
|
|
If unsure, say N.
|
|
|
|
config MMC_SDHCI_MICROCHIP_PIC32
|
|
tristate "Microchip PIC32MZDA SDHCI support"
|
|
depends on MMC_SDHCI && PIC32MZDA && MMC_SDHCI_PLTFM
|
|
help
|
|
This selects the Secure Digital Host Controller Interface (SDHCI)
|
|
for PIC32MZDA platform.
|
|
|
|
If you have a controller with this interface, say Y or M here.
|
|
|
|
If unsure, say N.
|
|
config MMC_SDHCI_BRCMSTB
|
|
tristate "Broadcom SDIO/SD/MMC support"
|
|
depends on ARCH_BRCMSTB || BMIPS_GENERIC
|
|
depends on MMC_SDHCI_PLTFM
|
|
default y
|
|
help
|
|
This selects support for the SDIO/SD/MMC Host Controller on
|
|
Broadcom STB SoCs.
|
|
|
|
If unsure, say Y.
|