![Peter Ujfalusi](/assets/img/avatar_default.png)
It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2367 lines
58 KiB
C
2367 lines
58 KiB
C
/*
|
|
* drivers/mmc/host/omap_hsmmc.c
|
|
*
|
|
* Driver for OMAP2430/3430 MMC controller.
|
|
*
|
|
* Copyright (C) 2007 Texas Instruments.
|
|
*
|
|
* Authors:
|
|
* Syed Mohammed Khasim <x0khasim@ti.com>
|
|
* Madhusudhan <madhu.cr@ti.com>
|
|
* Mohit Jalori <mjalori@ti.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/core.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pm_wakeirq.h>
|
|
#include <linux/platform_data/hsmmc-omap.h>
|
|
|
|
/* OMAP HSMMC Host Controller Registers */
|
|
#define OMAP_HSMMC_SYSSTATUS 0x0014
|
|
#define OMAP_HSMMC_CON 0x002C
|
|
#define OMAP_HSMMC_SDMASA 0x0100
|
|
#define OMAP_HSMMC_BLK 0x0104
|
|
#define OMAP_HSMMC_ARG 0x0108
|
|
#define OMAP_HSMMC_CMD 0x010C
|
|
#define OMAP_HSMMC_RSP10 0x0110
|
|
#define OMAP_HSMMC_RSP32 0x0114
|
|
#define OMAP_HSMMC_RSP54 0x0118
|
|
#define OMAP_HSMMC_RSP76 0x011C
|
|
#define OMAP_HSMMC_DATA 0x0120
|
|
#define OMAP_HSMMC_PSTATE 0x0124
|
|
#define OMAP_HSMMC_HCTL 0x0128
|
|
#define OMAP_HSMMC_SYSCTL 0x012C
|
|
#define OMAP_HSMMC_STAT 0x0130
|
|
#define OMAP_HSMMC_IE 0x0134
|
|
#define OMAP_HSMMC_ISE 0x0138
|
|
#define OMAP_HSMMC_AC12 0x013C
|
|
#define OMAP_HSMMC_CAPA 0x0140
|
|
|
|
#define VS18 (1 << 26)
|
|
#define VS30 (1 << 25)
|
|
#define HSS (1 << 21)
|
|
#define SDVS18 (0x5 << 9)
|
|
#define SDVS30 (0x6 << 9)
|
|
#define SDVS33 (0x7 << 9)
|
|
#define SDVS_MASK 0x00000E00
|
|
#define SDVSCLR 0xFFFFF1FF
|
|
#define SDVSDET 0x00000400
|
|
#define AUTOIDLE 0x1
|
|
#define SDBP (1 << 8)
|
|
#define DTO 0xe
|
|
#define ICE 0x1
|
|
#define ICS 0x2
|
|
#define CEN (1 << 2)
|
|
#define CLKD_MAX 0x3FF /* max clock divisor: 1023 */
|
|
#define CLKD_MASK 0x0000FFC0
|
|
#define CLKD_SHIFT 6
|
|
#define DTO_MASK 0x000F0000
|
|
#define DTO_SHIFT 16
|
|
#define INIT_STREAM (1 << 1)
|
|
#define ACEN_ACMD23 (2 << 2)
|
|
#define DP_SELECT (1 << 21)
|
|
#define DDIR (1 << 4)
|
|
#define DMAE 0x1
|
|
#define MSBS (1 << 5)
|
|
#define BCE (1 << 1)
|
|
#define FOUR_BIT (1 << 1)
|
|
#define HSPE (1 << 2)
|
|
#define IWE (1 << 24)
|
|
#define DDR (1 << 19)
|
|
#define CLKEXTFREE (1 << 16)
|
|
#define CTPL (1 << 11)
|
|
#define DW8 (1 << 5)
|
|
#define OD 0x1
|
|
#define STAT_CLEAR 0xFFFFFFFF
|
|
#define INIT_STREAM_CMD 0x00000000
|
|
#define DUAL_VOLT_OCR_BIT 7
|
|
#define SRC (1 << 25)
|
|
#define SRD (1 << 26)
|
|
#define SOFTRESET (1 << 1)
|
|
|
|
/* PSTATE */
|
|
#define DLEV_DAT(x) (1 << (20 + (x)))
|
|
|
|
/* Interrupt masks for IE and ISE register */
|
|
#define CC_EN (1 << 0)
|
|
#define TC_EN (1 << 1)
|
|
#define BWR_EN (1 << 4)
|
|
#define BRR_EN (1 << 5)
|
|
#define CIRQ_EN (1 << 8)
|
|
#define ERR_EN (1 << 15)
|
|
#define CTO_EN (1 << 16)
|
|
#define CCRC_EN (1 << 17)
|
|
#define CEB_EN (1 << 18)
|
|
#define CIE_EN (1 << 19)
|
|
#define DTO_EN (1 << 20)
|
|
#define DCRC_EN (1 << 21)
|
|
#define DEB_EN (1 << 22)
|
|
#define ACE_EN (1 << 24)
|
|
#define CERR_EN (1 << 28)
|
|
#define BADA_EN (1 << 29)
|
|
|
|
#define INT_EN_MASK (BADA_EN | CERR_EN | ACE_EN | DEB_EN | DCRC_EN |\
|
|
DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \
|
|
BRR_EN | BWR_EN | TC_EN | CC_EN)
|
|
|
|
#define CNI (1 << 7)
|
|
#define ACIE (1 << 4)
|
|
#define ACEB (1 << 3)
|
|
#define ACCE (1 << 2)
|
|
#define ACTO (1 << 1)
|
|
#define ACNE (1 << 0)
|
|
|
|
#define MMC_AUTOSUSPEND_DELAY 100
|
|
#define MMC_TIMEOUT_MS 20 /* 20 mSec */
|
|
#define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */
|
|
#define OMAP_MMC_MIN_CLOCK 400000
|
|
#define OMAP_MMC_MAX_CLOCK 52000000
|
|
#define DRIVER_NAME "omap_hsmmc"
|
|
|
|
#define VDD_1V8 1800000 /* 180000 uV */
|
|
#define VDD_3V0 3000000 /* 300000 uV */
|
|
#define VDD_165_195 (ffs(MMC_VDD_165_195) - 1)
|
|
|
|
/*
|
|
* One controller can have multiple slots, like on some omap boards using
|
|
* omap.c controller driver. Luckily this is not currently done on any known
|
|
* omap_hsmmc.c device.
|
|
*/
|
|
#define mmc_pdata(host) host->pdata
|
|
|
|
/*
|
|
* MMC Host controller read/write API's
|
|
*/
|
|
#define OMAP_HSMMC_READ(base, reg) \
|
|
__raw_readl((base) + OMAP_HSMMC_##reg)
|
|
|
|
#define OMAP_HSMMC_WRITE(base, reg, val) \
|
|
__raw_writel((val), (base) + OMAP_HSMMC_##reg)
|
|
|
|
struct omap_hsmmc_next {
|
|
unsigned int dma_len;
|
|
s32 cookie;
|
|
};
|
|
|
|
struct omap_hsmmc_host {
|
|
struct device *dev;
|
|
struct mmc_host *mmc;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
struct clk *fclk;
|
|
struct clk *dbclk;
|
|
struct regulator *pbias;
|
|
bool pbias_enabled;
|
|
void __iomem *base;
|
|
int vqmmc_enabled;
|
|
resource_size_t mapbase;
|
|
spinlock_t irq_lock; /* Prevent races with irq handler */
|
|
unsigned int dma_len;
|
|
unsigned int dma_sg_idx;
|
|
unsigned char bus_mode;
|
|
unsigned char power_mode;
|
|
int suspended;
|
|
u32 con;
|
|
u32 hctl;
|
|
u32 sysctl;
|
|
u32 capa;
|
|
int irq;
|
|
int wake_irq;
|
|
int use_dma, dma_ch;
|
|
struct dma_chan *tx_chan;
|
|
struct dma_chan *rx_chan;
|
|
int response_busy;
|
|
int context_loss;
|
|
int protect_card;
|
|
int reqs_blocked;
|
|
int req_in_progress;
|
|
unsigned long clk_rate;
|
|
unsigned int flags;
|
|
#define AUTO_CMD23 (1 << 0) /* Auto CMD23 support */
|
|
#define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */
|
|
struct omap_hsmmc_next next_data;
|
|
struct omap_hsmmc_platform_data *pdata;
|
|
|
|
/* return MMC cover switch state, can be NULL if not supported.
|
|
*
|
|
* possible return values:
|
|
* 0 - closed
|
|
* 1 - open
|
|
*/
|
|
int (*get_cover_state)(struct device *dev);
|
|
|
|
int (*card_detect)(struct device *dev);
|
|
};
|
|
|
|
struct omap_mmc_of_data {
|
|
u32 reg_offset;
|
|
u8 controller_flags;
|
|
};
|
|
|
|
static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
|
|
|
|
static int omap_hsmmc_card_detect(struct device *dev)
|
|
{
|
|
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
|
|
|
|
return mmc_gpio_get_cd(host->mmc);
|
|
}
|
|
|
|
static int omap_hsmmc_get_cover_state(struct device *dev)
|
|
{
|
|
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
|
|
|
|
return mmc_gpio_get_cd(host->mmc);
|
|
}
|
|
|
|
static int omap_hsmmc_enable_supply(struct mmc_host *mmc)
|
|
{
|
|
int ret;
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
struct mmc_ios *ios = &mmc->ios;
|
|
|
|
if (mmc->supply.vmmc) {
|
|
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Enable interface voltage rail, if needed */
|
|
if (mmc->supply.vqmmc && !host->vqmmc_enabled) {
|
|
ret = regulator_enable(mmc->supply.vqmmc);
|
|
if (ret) {
|
|
dev_err(mmc_dev(mmc), "vmmc_aux reg enable failed\n");
|
|
goto err_vqmmc;
|
|
}
|
|
host->vqmmc_enabled = 1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_vqmmc:
|
|
if (mmc->supply.vmmc)
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_disable_supply(struct mmc_host *mmc)
|
|
{
|
|
int ret;
|
|
int status;
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
if (mmc->supply.vqmmc && host->vqmmc_enabled) {
|
|
ret = regulator_disable(mmc->supply.vqmmc);
|
|
if (ret) {
|
|
dev_err(mmc_dev(mmc), "vmmc_aux reg disable failed\n");
|
|
return ret;
|
|
}
|
|
host->vqmmc_enabled = 0;
|
|
}
|
|
|
|
if (mmc->supply.vmmc) {
|
|
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
|
if (ret)
|
|
goto err_set_ocr;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_set_ocr:
|
|
if (mmc->supply.vqmmc) {
|
|
status = regulator_enable(mmc->supply.vqmmc);
|
|
if (status)
|
|
dev_err(mmc_dev(mmc), "vmmc_aux re-enable failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_set_pbias(struct omap_hsmmc_host *host, bool power_on,
|
|
int vdd)
|
|
{
|
|
int ret;
|
|
|
|
if (!host->pbias)
|
|
return 0;
|
|
|
|
if (power_on) {
|
|
if (vdd <= VDD_165_195)
|
|
ret = regulator_set_voltage(host->pbias, VDD_1V8,
|
|
VDD_1V8);
|
|
else
|
|
ret = regulator_set_voltage(host->pbias, VDD_3V0,
|
|
VDD_3V0);
|
|
if (ret < 0) {
|
|
dev_err(host->dev, "pbias set voltage fail\n");
|
|
return ret;
|
|
}
|
|
|
|
if (host->pbias_enabled == 0) {
|
|
ret = regulator_enable(host->pbias);
|
|
if (ret) {
|
|
dev_err(host->dev, "pbias reg enable fail\n");
|
|
return ret;
|
|
}
|
|
host->pbias_enabled = 1;
|
|
}
|
|
} else {
|
|
if (host->pbias_enabled == 1) {
|
|
ret = regulator_disable(host->pbias);
|
|
if (ret) {
|
|
dev_err(host->dev, "pbias reg disable fail\n");
|
|
return ret;
|
|
}
|
|
host->pbias_enabled = 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on,
|
|
int vdd)
|
|
{
|
|
struct mmc_host *mmc = host->mmc;
|
|
int ret = 0;
|
|
|
|
if (mmc_pdata(host)->set_power)
|
|
return mmc_pdata(host)->set_power(host->dev, power_on, vdd);
|
|
|
|
/*
|
|
* If we don't see a Vcc regulator, assume it's a fixed
|
|
* voltage always-on regulator.
|
|
*/
|
|
if (!mmc->supply.vmmc)
|
|
return 0;
|
|
|
|
if (mmc_pdata(host)->before_set_reg)
|
|
mmc_pdata(host)->before_set_reg(host->dev, power_on, vdd);
|
|
|
|
ret = omap_hsmmc_set_pbias(host, false, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Assume Vcc regulator is used only to power the card ... OMAP
|
|
* VDDS is used to power the pins, optionally with a transceiver to
|
|
* support cards using voltages other than VDDS (1.8V nominal). When a
|
|
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
|
|
*
|
|
* In some cases this regulator won't support enable/disable;
|
|
* e.g. it's a fixed rail for a WLAN chip.
|
|
*
|
|
* In other cases vcc_aux switches interface power. Example, for
|
|
* eMMC cards it represents VccQ. Sometimes transceivers or SDIO
|
|
* chips/cards need an interface voltage rail too.
|
|
*/
|
|
if (power_on) {
|
|
ret = omap_hsmmc_enable_supply(mmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = omap_hsmmc_set_pbias(host, true, vdd);
|
|
if (ret)
|
|
goto err_set_voltage;
|
|
} else {
|
|
ret = omap_hsmmc_disable_supply(mmc);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (mmc_pdata(host)->after_set_reg)
|
|
mmc_pdata(host)->after_set_reg(host->dev, power_on, vdd);
|
|
|
|
return 0;
|
|
|
|
err_set_voltage:
|
|
omap_hsmmc_disable_supply(mmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_disable_boot_regulator(struct regulator *reg)
|
|
{
|
|
int ret;
|
|
|
|
if (!reg)
|
|
return 0;
|
|
|
|
if (regulator_is_enabled(reg)) {
|
|
ret = regulator_enable(reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_disable(reg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_disable_boot_regulators(struct omap_hsmmc_host *host)
|
|
{
|
|
struct mmc_host *mmc = host->mmc;
|
|
int ret;
|
|
|
|
/*
|
|
* disable regulators enabled during boot and get the usecount
|
|
* right so that regulators can be enabled/disabled by checking
|
|
* the return value of regulator_is_enabled
|
|
*/
|
|
ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vmmc);
|
|
if (ret) {
|
|
dev_err(host->dev, "fail to disable boot enabled vmmc reg\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = omap_hsmmc_disable_boot_regulator(mmc->supply.vqmmc);
|
|
if (ret) {
|
|
dev_err(host->dev,
|
|
"fail to disable boot enabled vmmc_aux reg\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = omap_hsmmc_disable_boot_regulator(host->pbias);
|
|
if (ret) {
|
|
dev_err(host->dev,
|
|
"failed to disable boot enabled pbias reg\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
|
|
{
|
|
int ocr_value = 0;
|
|
int ret;
|
|
struct mmc_host *mmc = host->mmc;
|
|
|
|
if (mmc_pdata(host)->set_power)
|
|
return 0;
|
|
|
|
mmc->supply.vmmc = devm_regulator_get_optional(host->dev, "vmmc");
|
|
if (IS_ERR(mmc->supply.vmmc)) {
|
|
ret = PTR_ERR(mmc->supply.vmmc);
|
|
if ((ret != -ENODEV) && host->dev->of_node)
|
|
return ret;
|
|
dev_dbg(host->dev, "unable to get vmmc regulator %ld\n",
|
|
PTR_ERR(mmc->supply.vmmc));
|
|
mmc->supply.vmmc = NULL;
|
|
} else {
|
|
ocr_value = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
|
|
if (ocr_value > 0)
|
|
mmc_pdata(host)->ocr_mask = ocr_value;
|
|
}
|
|
|
|
/* Allow an aux regulator */
|
|
mmc->supply.vqmmc = devm_regulator_get_optional(host->dev, "vmmc_aux");
|
|
if (IS_ERR(mmc->supply.vqmmc)) {
|
|
ret = PTR_ERR(mmc->supply.vqmmc);
|
|
if ((ret != -ENODEV) && host->dev->of_node)
|
|
return ret;
|
|
dev_dbg(host->dev, "unable to get vmmc_aux regulator %ld\n",
|
|
PTR_ERR(mmc->supply.vqmmc));
|
|
mmc->supply.vqmmc = NULL;
|
|
}
|
|
|
|
host->pbias = devm_regulator_get_optional(host->dev, "pbias");
|
|
if (IS_ERR(host->pbias)) {
|
|
ret = PTR_ERR(host->pbias);
|
|
if ((ret != -ENODEV) && host->dev->of_node) {
|
|
dev_err(host->dev,
|
|
"SD card detect fail? enable CONFIG_REGULATOR_PBIAS\n");
|
|
return ret;
|
|
}
|
|
dev_dbg(host->dev, "unable to get pbias regulator %ld\n",
|
|
PTR_ERR(host->pbias));
|
|
host->pbias = NULL;
|
|
}
|
|
|
|
/* For eMMC do not power off when not in sleep state */
|
|
if (mmc_pdata(host)->no_regulator_off_init)
|
|
return 0;
|
|
|
|
ret = omap_hsmmc_disable_boot_regulators(host);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t omap_hsmmc_cover_irq(int irq, void *dev_id);
|
|
|
|
static int omap_hsmmc_gpio_init(struct mmc_host *mmc,
|
|
struct omap_hsmmc_host *host,
|
|
struct omap_hsmmc_platform_data *pdata)
|
|
{
|
|
int ret;
|
|
|
|
if (gpio_is_valid(pdata->gpio_cod)) {
|
|
ret = mmc_gpio_request_cd(mmc, pdata->gpio_cod, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
host->get_cover_state = omap_hsmmc_get_cover_state;
|
|
mmc_gpio_set_cd_isr(mmc, omap_hsmmc_cover_irq);
|
|
} else if (gpio_is_valid(pdata->gpio_cd)) {
|
|
ret = mmc_gpio_request_cd(mmc, pdata->gpio_cd, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
host->card_detect = omap_hsmmc_card_detect;
|
|
}
|
|
|
|
if (gpio_is_valid(pdata->gpio_wp)) {
|
|
ret = mmc_gpio_request_ro(mmc, pdata->gpio_wp);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Start clock to the card
|
|
*/
|
|
static void omap_hsmmc_start_clock(struct omap_hsmmc_host *host)
|
|
{
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
|
|
}
|
|
|
|
/*
|
|
* Stop clock to the card
|
|
*/
|
|
static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host)
|
|
{
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
|
|
if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
|
|
dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stopped\n");
|
|
}
|
|
|
|
static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
|
|
struct mmc_command *cmd)
|
|
{
|
|
u32 irq_mask = INT_EN_MASK;
|
|
unsigned long flags;
|
|
|
|
if (host->use_dma)
|
|
irq_mask &= ~(BRR_EN | BWR_EN);
|
|
|
|
/* Disable timeout for erases */
|
|
if (cmd->opcode == MMC_ERASE)
|
|
irq_mask &= ~DTO_EN;
|
|
|
|
spin_lock_irqsave(&host->irq_lock, flags);
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
|
|
|
|
/* latch pending CIRQ, but don't signal MMC core */
|
|
if (host->flags & HSMMC_SDIO_IRQ_ENABLED)
|
|
irq_mask |= CIRQ_EN;
|
|
OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
|
|
spin_unlock_irqrestore(&host->irq_lock, flags);
|
|
}
|
|
|
|
static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host)
|
|
{
|
|
u32 irq_mask = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->irq_lock, flags);
|
|
/* no transfer running but need to keep cirq if enabled */
|
|
if (host->flags & HSMMC_SDIO_IRQ_ENABLED)
|
|
irq_mask |= CIRQ_EN;
|
|
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
|
|
OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
spin_unlock_irqrestore(&host->irq_lock, flags);
|
|
}
|
|
|
|
/* Calculate divisor for the given clock frequency */
|
|
static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios)
|
|
{
|
|
u16 dsor = 0;
|
|
|
|
if (ios->clock) {
|
|
dsor = DIV_ROUND_UP(clk_get_rate(host->fclk), ios->clock);
|
|
if (dsor > CLKD_MAX)
|
|
dsor = CLKD_MAX;
|
|
}
|
|
|
|
return dsor;
|
|
}
|
|
|
|
static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
|
|
{
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
unsigned long regval;
|
|
unsigned long timeout;
|
|
unsigned long clkdiv;
|
|
|
|
dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock);
|
|
|
|
omap_hsmmc_stop_clock(host);
|
|
|
|
regval = OMAP_HSMMC_READ(host->base, SYSCTL);
|
|
regval = regval & ~(CLKD_MASK | DTO_MASK);
|
|
clkdiv = calc_divisor(host, ios);
|
|
regval = regval | (clkdiv << 6) | (DTO << 16);
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
|
|
|
|
/* Wait till the ICS bit is set */
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS
|
|
&& time_before(jiffies, timeout))
|
|
cpu_relax();
|
|
|
|
/*
|
|
* Enable High-Speed Support
|
|
* Pre-Requisites
|
|
* - Controller should support High-Speed-Enable Bit
|
|
* - Controller should not be using DDR Mode
|
|
* - Controller should advertise that it supports High Speed
|
|
* in capabilities register
|
|
* - MMC/SD clock coming out of controller > 25MHz
|
|
*/
|
|
if ((mmc_pdata(host)->features & HSMMC_HAS_HSPE_SUPPORT) &&
|
|
(ios->timing != MMC_TIMING_MMC_DDR52) &&
|
|
(ios->timing != MMC_TIMING_UHS_DDR50) &&
|
|
((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
|
|
regval = OMAP_HSMMC_READ(host->base, HCTL);
|
|
if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
|
|
regval |= HSPE;
|
|
else
|
|
regval &= ~HSPE;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL, regval);
|
|
}
|
|
|
|
omap_hsmmc_start_clock(host);
|
|
}
|
|
|
|
static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host)
|
|
{
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
u32 con;
|
|
|
|
con = OMAP_HSMMC_READ(host->base, CON);
|
|
if (ios->timing == MMC_TIMING_MMC_DDR52 ||
|
|
ios->timing == MMC_TIMING_UHS_DDR50)
|
|
con |= DDR; /* configure in DDR mode */
|
|
else
|
|
con &= ~DDR;
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_8:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con | DW8);
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
|
|
break;
|
|
case MMC_BUS_WIDTH_1:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void omap_hsmmc_set_bus_mode(struct omap_hsmmc_host *host)
|
|
{
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
u32 con;
|
|
|
|
con = OMAP_HSMMC_READ(host->base, CON);
|
|
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
OMAP_HSMMC_WRITE(host->base, CON, con | OD);
|
|
else
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~OD);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/*
|
|
* Restore the MMC host context, if it was lost as result of a
|
|
* power state change.
|
|
*/
|
|
static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
|
|
{
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
u32 hctl, capa;
|
|
unsigned long timeout;
|
|
|
|
if (host->con == OMAP_HSMMC_READ(host->base, CON) &&
|
|
host->hctl == OMAP_HSMMC_READ(host->base, HCTL) &&
|
|
host->sysctl == OMAP_HSMMC_READ(host->base, SYSCTL) &&
|
|
host->capa == OMAP_HSMMC_READ(host->base, CAPA))
|
|
return 0;
|
|
|
|
host->context_loss++;
|
|
|
|
if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
|
|
if (host->power_mode != MMC_POWER_OFF &&
|
|
(1 << ios->vdd) <= MMC_VDD_23_24)
|
|
hctl = SDVS18;
|
|
else
|
|
hctl = SDVS30;
|
|
capa = VS30 | VS18;
|
|
} else {
|
|
hctl = SDVS18;
|
|
capa = VS18;
|
|
}
|
|
|
|
if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
|
|
hctl |= IWE;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | hctl);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CAPA,
|
|
OMAP_HSMMC_READ(host->base, CAPA) | capa);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((OMAP_HSMMC_READ(host->base, HCTL) & SDBP) != SDBP
|
|
&& time_before(jiffies, timeout))
|
|
;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, ISE, 0);
|
|
OMAP_HSMMC_WRITE(host->base, IE, 0);
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
|
|
/* Do not initialize card-specific things if the power is off */
|
|
if (host->power_mode == MMC_POWER_OFF)
|
|
goto out;
|
|
|
|
omap_hsmmc_set_bus_width(host);
|
|
|
|
omap_hsmmc_set_clock(host);
|
|
|
|
omap_hsmmc_set_bus_mode(host);
|
|
|
|
out:
|
|
dev_dbg(mmc_dev(host->mmc), "context is restored: restore count %d\n",
|
|
host->context_loss);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Save the MMC host context (store the number of power state changes so far).
|
|
*/
|
|
static void omap_hsmmc_context_save(struct omap_hsmmc_host *host)
|
|
{
|
|
host->con = OMAP_HSMMC_READ(host->base, CON);
|
|
host->hctl = OMAP_HSMMC_READ(host->base, HCTL);
|
|
host->sysctl = OMAP_HSMMC_READ(host->base, SYSCTL);
|
|
host->capa = OMAP_HSMMC_READ(host->base, CAPA);
|
|
}
|
|
|
|
#else
|
|
|
|
static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void omap_hsmmc_context_save(struct omap_hsmmc_host *host)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Send init stream sequence to card
|
|
* before sending IDLE command
|
|
*/
|
|
static void send_init_stream(struct omap_hsmmc_host *host)
|
|
{
|
|
int reg = 0;
|
|
unsigned long timeout;
|
|
|
|
if (host->protect_card)
|
|
return;
|
|
|
|
disable_irq(host->irq);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
|
|
OMAP_HSMMC_WRITE(host->base, CON,
|
|
OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
|
|
OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((reg != CC_EN) && time_before(jiffies, timeout))
|
|
reg = OMAP_HSMMC_READ(host->base, STAT) & CC_EN;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CON,
|
|
OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
OMAP_HSMMC_READ(host->base, STAT);
|
|
|
|
enable_irq(host->irq);
|
|
}
|
|
|
|
static inline
|
|
int omap_hsmmc_cover_is_closed(struct omap_hsmmc_host *host)
|
|
{
|
|
int r = 1;
|
|
|
|
if (host->get_cover_state)
|
|
r = host->get_cover_state(host->dev);
|
|
return r;
|
|
}
|
|
|
|
static ssize_t
|
|
omap_hsmmc_show_cover_switch(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
return sprintf(buf, "%s\n",
|
|
omap_hsmmc_cover_is_closed(host) ? "closed" : "open");
|
|
}
|
|
|
|
static DEVICE_ATTR(cover_switch, S_IRUGO, omap_hsmmc_show_cover_switch, NULL);
|
|
|
|
static ssize_t
|
|
omap_hsmmc_show_slot_name(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
return sprintf(buf, "%s\n", mmc_pdata(host)->name);
|
|
}
|
|
|
|
static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL);
|
|
|
|
/*
|
|
* Configure the response type and send the cmd.
|
|
*/
|
|
static void
|
|
omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
int cmdreg = 0, resptype = 0, cmdtype = 0;
|
|
|
|
dev_vdbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
|
|
mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
|
|
host->cmd = cmd;
|
|
|
|
omap_hsmmc_enable_irq(host, cmd);
|
|
|
|
host->response_busy = 0;
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136)
|
|
resptype = 1;
|
|
else if (cmd->flags & MMC_RSP_BUSY) {
|
|
resptype = 3;
|
|
host->response_busy = 1;
|
|
} else
|
|
resptype = 2;
|
|
}
|
|
|
|
/*
|
|
* Unlike OMAP1 controller, the cmdtype does not seem to be based on
|
|
* ac, bc, adtc, bcr. Only commands ending an open ended transfer need
|
|
* a val of 0x3, rest 0x0.
|
|
*/
|
|
if (cmd == host->mrq->stop)
|
|
cmdtype = 0x3;
|
|
|
|
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
|
|
|
|
if ((host->flags & AUTO_CMD23) && mmc_op_multi(cmd->opcode) &&
|
|
host->mrq->sbc) {
|
|
cmdreg |= ACEN_ACMD23;
|
|
OMAP_HSMMC_WRITE(host->base, SDMASA, host->mrq->sbc->arg);
|
|
}
|
|
if (data) {
|
|
cmdreg |= DP_SELECT | MSBS | BCE;
|
|
if (data->flags & MMC_DATA_READ)
|
|
cmdreg |= DDIR;
|
|
else
|
|
cmdreg &= ~(DDIR);
|
|
}
|
|
|
|
if (host->use_dma)
|
|
cmdreg |= DMAE;
|
|
|
|
host->req_in_progress = 1;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
|
|
OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
|
|
}
|
|
|
|
static int
|
|
omap_hsmmc_get_dma_dir(struct omap_hsmmc_host *host, struct mmc_data *data)
|
|
{
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
return DMA_TO_DEVICE;
|
|
else
|
|
return DMA_FROM_DEVICE;
|
|
}
|
|
|
|
static struct dma_chan *omap_hsmmc_get_dma_chan(struct omap_hsmmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
|
|
}
|
|
|
|
static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq)
|
|
{
|
|
int dma_ch;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->irq_lock, flags);
|
|
host->req_in_progress = 0;
|
|
dma_ch = host->dma_ch;
|
|
spin_unlock_irqrestore(&host->irq_lock, flags);
|
|
|
|
omap_hsmmc_disable_irq(host);
|
|
/* Do not complete the request if DMA is still in progress */
|
|
if (mrq->data && host->use_dma && dma_ch != -1)
|
|
return;
|
|
host->mrq = NULL;
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
/*
|
|
* Notify the transfer complete to MMC core
|
|
*/
|
|
static void
|
|
omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
|
|
{
|
|
if (!data) {
|
|
struct mmc_request *mrq = host->mrq;
|
|
|
|
/* TC before CC from CMD6 - don't know why, but it happens */
|
|
if (host->cmd && host->cmd->opcode == 6 &&
|
|
host->response_busy) {
|
|
host->response_busy = 0;
|
|
return;
|
|
}
|
|
|
|
omap_hsmmc_request_done(host, mrq);
|
|
return;
|
|
}
|
|
|
|
host->data = NULL;
|
|
|
|
if (!data->error)
|
|
data->bytes_xfered += data->blocks * (data->blksz);
|
|
else
|
|
data->bytes_xfered = 0;
|
|
|
|
if (data->stop && (data->error || !host->mrq->sbc))
|
|
omap_hsmmc_start_command(host, data->stop, NULL);
|
|
else
|
|
omap_hsmmc_request_done(host, data->mrq);
|
|
}
|
|
|
|
/*
|
|
* Notify the core about command completion
|
|
*/
|
|
static void
|
|
omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd)
|
|
{
|
|
if (host->mrq->sbc && (host->cmd == host->mrq->sbc) &&
|
|
!host->mrq->sbc->error && !(host->flags & AUTO_CMD23)) {
|
|
host->cmd = NULL;
|
|
omap_hsmmc_start_dma_transfer(host);
|
|
omap_hsmmc_start_command(host, host->mrq->cmd,
|
|
host->mrq->data);
|
|
return;
|
|
}
|
|
|
|
host->cmd = NULL;
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
/* response type 2 */
|
|
cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
|
|
cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
|
|
cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
|
|
cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
|
|
} else {
|
|
/* response types 1, 1b, 3, 4, 5, 6 */
|
|
cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
|
|
}
|
|
}
|
|
if ((host->data == NULL && !host->response_busy) || cmd->error)
|
|
omap_hsmmc_request_done(host, host->mrq);
|
|
}
|
|
|
|
/*
|
|
* DMA clean up for command errors
|
|
*/
|
|
static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
|
|
{
|
|
int dma_ch;
|
|
unsigned long flags;
|
|
|
|
host->data->error = errno;
|
|
|
|
spin_lock_irqsave(&host->irq_lock, flags);
|
|
dma_ch = host->dma_ch;
|
|
host->dma_ch = -1;
|
|
spin_unlock_irqrestore(&host->irq_lock, flags);
|
|
|
|
if (host->use_dma && dma_ch != -1) {
|
|
struct dma_chan *chan = omap_hsmmc_get_dma_chan(host, host->data);
|
|
|
|
dmaengine_terminate_all(chan);
|
|
dma_unmap_sg(chan->device->dev,
|
|
host->data->sg, host->data->sg_len,
|
|
omap_hsmmc_get_dma_dir(host, host->data));
|
|
|
|
host->data->host_cookie = 0;
|
|
}
|
|
host->data = NULL;
|
|
}
|
|
|
|
/*
|
|
* Readable error output
|
|
*/
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
static void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host, u32 status)
|
|
{
|
|
/* --- means reserved bit without definition at documentation */
|
|
static const char *omap_hsmmc_status_bits[] = {
|
|
"CC" , "TC" , "BGE", "---", "BWR" , "BRR" , "---" , "---" ,
|
|
"CIRQ", "OBI" , "---", "---", "---" , "---" , "---" , "ERRI",
|
|
"CTO" , "CCRC", "CEB", "CIE", "DTO" , "DCRC", "DEB" , "---" ,
|
|
"ACE" , "---" , "---", "---", "CERR", "BADA", "---" , "---"
|
|
};
|
|
char res[256];
|
|
char *buf = res;
|
|
int len, i;
|
|
|
|
len = sprintf(buf, "MMC IRQ 0x%x :", status);
|
|
buf += len;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(omap_hsmmc_status_bits); i++)
|
|
if (status & (1 << i)) {
|
|
len = sprintf(buf, " %s", omap_hsmmc_status_bits[i]);
|
|
buf += len;
|
|
}
|
|
|
|
dev_vdbg(mmc_dev(host->mmc), "%s\n", res);
|
|
}
|
|
#else
|
|
static inline void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host,
|
|
u32 status)
|
|
{
|
|
}
|
|
#endif /* CONFIG_MMC_DEBUG */
|
|
|
|
/*
|
|
* MMC controller internal state machines reset
|
|
*
|
|
* Used to reset command or data internal state machines, using respectively
|
|
* SRC or SRD bit of SYSCTL register
|
|
* Can be called from interrupt context
|
|
*/
|
|
static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
|
|
unsigned long bit)
|
|
{
|
|
unsigned long i = 0;
|
|
unsigned long limit = MMC_TIMEOUT_US;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
|
|
|
|
/*
|
|
* OMAP4 ES2 and greater has an updated reset logic.
|
|
* Monitor a 0->1 transition first
|
|
*/
|
|
if (mmc_pdata(host)->features & HSMMC_HAS_UPDATED_RESET) {
|
|
while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
|
|
&& (i++ < limit))
|
|
udelay(1);
|
|
}
|
|
i = 0;
|
|
|
|
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
|
|
(i++ < limit))
|
|
udelay(1);
|
|
|
|
if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
|
|
dev_err(mmc_dev(host->mmc),
|
|
"Timeout waiting on controller reset in %s\n",
|
|
__func__);
|
|
}
|
|
|
|
static void hsmmc_command_incomplete(struct omap_hsmmc_host *host,
|
|
int err, int end_cmd)
|
|
{
|
|
if (end_cmd) {
|
|
omap_hsmmc_reset_controller_fsm(host, SRC);
|
|
if (host->cmd)
|
|
host->cmd->error = err;
|
|
}
|
|
|
|
if (host->data) {
|
|
omap_hsmmc_reset_controller_fsm(host, SRD);
|
|
omap_hsmmc_dma_cleanup(host, err);
|
|
} else if (host->mrq && host->mrq->cmd)
|
|
host->mrq->cmd->error = err;
|
|
}
|
|
|
|
static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
|
|
{
|
|
struct mmc_data *data;
|
|
int end_cmd = 0, end_trans = 0;
|
|
int error = 0;
|
|
|
|
data = host->data;
|
|
dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
|
|
|
|
if (status & ERR_EN) {
|
|
omap_hsmmc_dbg_report_irq(host, status);
|
|
|
|
if (status & (CTO_EN | CCRC_EN))
|
|
end_cmd = 1;
|
|
if (host->data || host->response_busy) {
|
|
end_trans = !end_cmd;
|
|
host->response_busy = 0;
|
|
}
|
|
if (status & (CTO_EN | DTO_EN))
|
|
hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd);
|
|
else if (status & (CCRC_EN | DCRC_EN | DEB_EN | CEB_EN |
|
|
BADA_EN))
|
|
hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
|
|
|
|
if (status & ACE_EN) {
|
|
u32 ac12;
|
|
ac12 = OMAP_HSMMC_READ(host->base, AC12);
|
|
if (!(ac12 & ACNE) && host->mrq->sbc) {
|
|
end_cmd = 1;
|
|
if (ac12 & ACTO)
|
|
error = -ETIMEDOUT;
|
|
else if (ac12 & (ACCE | ACEB | ACIE))
|
|
error = -EILSEQ;
|
|
host->mrq->sbc->error = error;
|
|
hsmmc_command_incomplete(host, error, end_cmd);
|
|
}
|
|
dev_dbg(mmc_dev(host->mmc), "AC12 err: 0x%x\n", ac12);
|
|
}
|
|
}
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT, status);
|
|
if (end_cmd || ((status & CC_EN) && host->cmd))
|
|
omap_hsmmc_cmd_done(host, host->cmd);
|
|
if ((end_trans || (status & TC_EN)) && host->mrq)
|
|
omap_hsmmc_xfer_done(host, data);
|
|
}
|
|
|
|
/*
|
|
* MMC controller IRQ handler
|
|
*/
|
|
static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
|
|
{
|
|
struct omap_hsmmc_host *host = dev_id;
|
|
int status;
|
|
|
|
status = OMAP_HSMMC_READ(host->base, STAT);
|
|
while (status & (INT_EN_MASK | CIRQ_EN)) {
|
|
if (host->req_in_progress)
|
|
omap_hsmmc_do_irq(host, status);
|
|
|
|
if (status & CIRQ_EN)
|
|
mmc_signal_sdio_irq(host->mmc);
|
|
|
|
/* Flush posted write */
|
|
status = OMAP_HSMMC_READ(host->base, STAT);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void set_sd_bus_power(struct omap_hsmmc_host *host)
|
|
{
|
|
unsigned long i;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
|
|
for (i = 0; i < loops_per_jiffy; i++) {
|
|
if (OMAP_HSMMC_READ(host->base, HCTL) & SDBP)
|
|
break;
|
|
cpu_relax();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Switch MMC interface voltage ... only relevant for MMC1.
|
|
*
|
|
* MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
|
|
* The MMC2 transceiver controls are used instead of DAT4..DAT7.
|
|
* Some chips, like eMMC ones, use internal transceivers.
|
|
*/
|
|
static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
|
|
{
|
|
u32 reg_val = 0;
|
|
int ret;
|
|
|
|
/* Disable the clocks */
|
|
if (host->dbclk)
|
|
clk_disable_unprepare(host->dbclk);
|
|
|
|
/* Turn the power off */
|
|
ret = omap_hsmmc_set_power(host, 0, 0);
|
|
|
|
/* Turn the power ON with given VDD 1.8 or 3.0v */
|
|
if (!ret)
|
|
ret = omap_hsmmc_set_power(host, 1, vdd);
|
|
if (host->dbclk)
|
|
clk_prepare_enable(host->dbclk);
|
|
|
|
if (ret != 0)
|
|
goto err;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
|
|
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
|
|
|
|
/*
|
|
* If a MMC dual voltage card is detected, the set_ios fn calls
|
|
* this fn with VDD bit set for 1.8V. Upon card removal from the
|
|
* slot, omap_hsmmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
|
|
*
|
|
* Cope with a bit of slop in the range ... per data sheets:
|
|
* - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
|
|
* but recommended values are 1.71V to 1.89V
|
|
* - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
|
|
* but recommended values are 2.7V to 3.3V
|
|
*
|
|
* Board setup code shouldn't permit anything very out-of-range.
|
|
* TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
|
|
* middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
|
|
*/
|
|
if ((1 << vdd) <= MMC_VDD_23_24)
|
|
reg_val |= SDVS18;
|
|
else
|
|
reg_val |= SDVS30;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
|
|
set_sd_bus_power(host);
|
|
|
|
return 0;
|
|
err:
|
|
dev_err(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Protect the card while the cover is open */
|
|
static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
|
|
{
|
|
if (!host->get_cover_state)
|
|
return;
|
|
|
|
host->reqs_blocked = 0;
|
|
if (host->get_cover_state(host->dev)) {
|
|
if (host->protect_card) {
|
|
dev_info(host->dev, "%s: cover is closed, "
|
|
"card is now accessible\n",
|
|
mmc_hostname(host->mmc));
|
|
host->protect_card = 0;
|
|
}
|
|
} else {
|
|
if (!host->protect_card) {
|
|
dev_info(host->dev, "%s: cover is open, "
|
|
"card is now inaccessible\n",
|
|
mmc_hostname(host->mmc));
|
|
host->protect_card = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* irq handler when (cell-phone) cover is mounted/removed
|
|
*/
|
|
static irqreturn_t omap_hsmmc_cover_irq(int irq, void *dev_id)
|
|
{
|
|
struct omap_hsmmc_host *host = dev_id;
|
|
|
|
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
|
|
|
|
omap_hsmmc_protect_card(host);
|
|
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void omap_hsmmc_dma_callback(void *param)
|
|
{
|
|
struct omap_hsmmc_host *host = param;
|
|
struct dma_chan *chan;
|
|
struct mmc_data *data;
|
|
int req_in_progress;
|
|
|
|
spin_lock_irq(&host->irq_lock);
|
|
if (host->dma_ch < 0) {
|
|
spin_unlock_irq(&host->irq_lock);
|
|
return;
|
|
}
|
|
|
|
data = host->mrq->data;
|
|
chan = omap_hsmmc_get_dma_chan(host, data);
|
|
if (!data->host_cookie)
|
|
dma_unmap_sg(chan->device->dev,
|
|
data->sg, data->sg_len,
|
|
omap_hsmmc_get_dma_dir(host, data));
|
|
|
|
req_in_progress = host->req_in_progress;
|
|
host->dma_ch = -1;
|
|
spin_unlock_irq(&host->irq_lock);
|
|
|
|
/* If DMA has finished after TC, complete the request */
|
|
if (!req_in_progress) {
|
|
struct mmc_request *mrq = host->mrq;
|
|
|
|
host->mrq = NULL;
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
}
|
|
|
|
static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host,
|
|
struct mmc_data *data,
|
|
struct omap_hsmmc_next *next,
|
|
struct dma_chan *chan)
|
|
{
|
|
int dma_len;
|
|
|
|
if (!next && data->host_cookie &&
|
|
data->host_cookie != host->next_data.cookie) {
|
|
dev_warn(host->dev, "[%s] invalid cookie: data->host_cookie %d"
|
|
" host->next_data.cookie %d\n",
|
|
__func__, data->host_cookie, host->next_data.cookie);
|
|
data->host_cookie = 0;
|
|
}
|
|
|
|
/* Check if next job is already prepared */
|
|
if (next || data->host_cookie != host->next_data.cookie) {
|
|
dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len,
|
|
omap_hsmmc_get_dma_dir(host, data));
|
|
|
|
} else {
|
|
dma_len = host->next_data.dma_len;
|
|
host->next_data.dma_len = 0;
|
|
}
|
|
|
|
|
|
if (dma_len == 0)
|
|
return -EINVAL;
|
|
|
|
if (next) {
|
|
next->dma_len = dma_len;
|
|
data->host_cookie = ++next->cookie < 0 ? 1 : next->cookie;
|
|
} else
|
|
host->dma_len = dma_len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Routine to configure and start DMA for the MMC card
|
|
*/
|
|
static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host,
|
|
struct mmc_request *req)
|
|
{
|
|
struct dma_async_tx_descriptor *tx;
|
|
int ret = 0, i;
|
|
struct mmc_data *data = req->data;
|
|
struct dma_chan *chan;
|
|
struct dma_slave_config cfg = {
|
|
.src_addr = host->mapbase + OMAP_HSMMC_DATA,
|
|
.dst_addr = host->mapbase + OMAP_HSMMC_DATA,
|
|
.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.src_maxburst = data->blksz / 4,
|
|
.dst_maxburst = data->blksz / 4,
|
|
};
|
|
|
|
/* Sanity check: all the SG entries must be aligned by block size. */
|
|
for (i = 0; i < data->sg_len; i++) {
|
|
struct scatterlist *sgl;
|
|
|
|
sgl = data->sg + i;
|
|
if (sgl->length % data->blksz)
|
|
return -EINVAL;
|
|
}
|
|
if ((data->blksz % 4) != 0)
|
|
/* REVISIT: The MMC buffer increments only when MSB is written.
|
|
* Return error for blksz which is non multiple of four.
|
|
*/
|
|
return -EINVAL;
|
|
|
|
BUG_ON(host->dma_ch != -1);
|
|
|
|
chan = omap_hsmmc_get_dma_chan(host, data);
|
|
|
|
ret = dmaengine_slave_config(chan, &cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = omap_hsmmc_pre_dma_transfer(host, data, NULL, chan);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tx = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len,
|
|
data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!tx) {
|
|
dev_err(mmc_dev(host->mmc), "prep_slave_sg() failed\n");
|
|
/* FIXME: cleanup */
|
|
return -1;
|
|
}
|
|
|
|
tx->callback = omap_hsmmc_dma_callback;
|
|
tx->callback_param = host;
|
|
|
|
/* Does not fail */
|
|
dmaengine_submit(tx);
|
|
|
|
host->dma_ch = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_data_timeout(struct omap_hsmmc_host *host,
|
|
unsigned int timeout_ns,
|
|
unsigned int timeout_clks)
|
|
{
|
|
unsigned int timeout, cycle_ns;
|
|
uint32_t reg, clkd, dto = 0;
|
|
|
|
reg = OMAP_HSMMC_READ(host->base, SYSCTL);
|
|
clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
|
|
if (clkd == 0)
|
|
clkd = 1;
|
|
|
|
cycle_ns = 1000000000 / (host->clk_rate / clkd);
|
|
timeout = timeout_ns / cycle_ns;
|
|
timeout += timeout_clks;
|
|
if (timeout) {
|
|
while ((timeout & 0x80000000) == 0) {
|
|
dto += 1;
|
|
timeout <<= 1;
|
|
}
|
|
dto = 31 - dto;
|
|
timeout <<= 1;
|
|
if (timeout && dto)
|
|
dto += 1;
|
|
if (dto >= 13)
|
|
dto -= 13;
|
|
else
|
|
dto = 0;
|
|
if (dto > 14)
|
|
dto = 14;
|
|
}
|
|
|
|
reg &= ~DTO_MASK;
|
|
reg |= dto << DTO_SHIFT;
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
|
|
}
|
|
|
|
static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host)
|
|
{
|
|
struct mmc_request *req = host->mrq;
|
|
struct dma_chan *chan;
|
|
|
|
if (!req->data)
|
|
return;
|
|
OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
|
|
| (req->data->blocks << 16));
|
|
set_data_timeout(host, req->data->timeout_ns,
|
|
req->data->timeout_clks);
|
|
chan = omap_hsmmc_get_dma_chan(host, req->data);
|
|
dma_async_issue_pending(chan);
|
|
}
|
|
|
|
/*
|
|
* Configure block length for MMC/SD cards and initiate the transfer.
|
|
*/
|
|
static int
|
|
omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req)
|
|
{
|
|
int ret;
|
|
host->data = req->data;
|
|
|
|
if (req->data == NULL) {
|
|
OMAP_HSMMC_WRITE(host->base, BLK, 0);
|
|
/*
|
|
* Set an arbitrary 100ms data timeout for commands with
|
|
* busy signal.
|
|
*/
|
|
if (req->cmd->flags & MMC_RSP_BUSY)
|
|
set_data_timeout(host, 100000000U, 0);
|
|
return 0;
|
|
}
|
|
|
|
if (host->use_dma) {
|
|
ret = omap_hsmmc_setup_dma_transfer(host, req);
|
|
if (ret != 0) {
|
|
dev_err(mmc_dev(host->mmc), "MMC start dma failure\n");
|
|
return ret;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
|
|
int err)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (host->use_dma && data->host_cookie) {
|
|
struct dma_chan *c = omap_hsmmc_get_dma_chan(host, data);
|
|
|
|
dma_unmap_sg(c->device->dev, data->sg, data->sg_len,
|
|
omap_hsmmc_get_dma_dir(host, data));
|
|
data->host_cookie = 0;
|
|
}
|
|
}
|
|
|
|
static void omap_hsmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
|
|
bool is_first_req)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
if (mrq->data->host_cookie) {
|
|
mrq->data->host_cookie = 0;
|
|
return ;
|
|
}
|
|
|
|
if (host->use_dma) {
|
|
struct dma_chan *c = omap_hsmmc_get_dma_chan(host, mrq->data);
|
|
|
|
if (omap_hsmmc_pre_dma_transfer(host, mrq->data,
|
|
&host->next_data, c))
|
|
mrq->data->host_cookie = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Request function. for read/write operation
|
|
*/
|
|
static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
int err;
|
|
|
|
BUG_ON(host->req_in_progress);
|
|
BUG_ON(host->dma_ch != -1);
|
|
if (host->protect_card) {
|
|
if (host->reqs_blocked < 3) {
|
|
/*
|
|
* Ensure the controller is left in a consistent
|
|
* state by resetting the command and data state
|
|
* machines.
|
|
*/
|
|
omap_hsmmc_reset_controller_fsm(host, SRD);
|
|
omap_hsmmc_reset_controller_fsm(host, SRC);
|
|
host->reqs_blocked += 1;
|
|
}
|
|
req->cmd->error = -EBADF;
|
|
if (req->data)
|
|
req->data->error = -EBADF;
|
|
req->cmd->retries = 0;
|
|
mmc_request_done(mmc, req);
|
|
return;
|
|
} else if (host->reqs_blocked)
|
|
host->reqs_blocked = 0;
|
|
WARN_ON(host->mrq != NULL);
|
|
host->mrq = req;
|
|
host->clk_rate = clk_get_rate(host->fclk);
|
|
err = omap_hsmmc_prepare_data(host, req);
|
|
if (err) {
|
|
req->cmd->error = err;
|
|
if (req->data)
|
|
req->data->error = err;
|
|
host->mrq = NULL;
|
|
mmc_request_done(mmc, req);
|
|
return;
|
|
}
|
|
if (req->sbc && !(host->flags & AUTO_CMD23)) {
|
|
omap_hsmmc_start_command(host, req->sbc, NULL);
|
|
return;
|
|
}
|
|
|
|
omap_hsmmc_start_dma_transfer(host);
|
|
omap_hsmmc_start_command(host, req->cmd, req->data);
|
|
}
|
|
|
|
/* Routine to configure clock values. Exposed API to core */
|
|
static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
int do_send_init_stream = 0;
|
|
|
|
if (ios->power_mode != host->power_mode) {
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_OFF:
|
|
omap_hsmmc_set_power(host, 0, 0);
|
|
break;
|
|
case MMC_POWER_UP:
|
|
omap_hsmmc_set_power(host, 1, ios->vdd);
|
|
break;
|
|
case MMC_POWER_ON:
|
|
do_send_init_stream = 1;
|
|
break;
|
|
}
|
|
host->power_mode = ios->power_mode;
|
|
}
|
|
|
|
/* FIXME: set registers based only on changes to ios */
|
|
|
|
omap_hsmmc_set_bus_width(host);
|
|
|
|
if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
|
|
/* Only MMC1 can interface at 3V without some flavor
|
|
* of external transceiver; but they all handle 1.8V.
|
|
*/
|
|
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
|
|
(ios->vdd == DUAL_VOLT_OCR_BIT)) {
|
|
/*
|
|
* The mmc_select_voltage fn of the core does
|
|
* not seem to set the power_mode to
|
|
* MMC_POWER_UP upon recalculating the voltage.
|
|
* vdd 1.8v.
|
|
*/
|
|
if (omap_hsmmc_switch_opcond(host, ios->vdd) != 0)
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Switch operation failed\n");
|
|
}
|
|
}
|
|
|
|
omap_hsmmc_set_clock(host);
|
|
|
|
if (do_send_init_stream)
|
|
send_init_stream(host);
|
|
|
|
omap_hsmmc_set_bus_mode(host);
|
|
}
|
|
|
|
static int omap_hsmmc_get_cd(struct mmc_host *mmc)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
if (!host->card_detect)
|
|
return -ENOSYS;
|
|
return host->card_detect(host->dev);
|
|
}
|
|
|
|
static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
if (mmc_pdata(host)->init_card)
|
|
mmc_pdata(host)->init_card(card);
|
|
}
|
|
|
|
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
u32 irq_mask, con;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->irq_lock, flags);
|
|
|
|
con = OMAP_HSMMC_READ(host->base, CON);
|
|
irq_mask = OMAP_HSMMC_READ(host->base, ISE);
|
|
if (enable) {
|
|
host->flags |= HSMMC_SDIO_IRQ_ENABLED;
|
|
irq_mask |= CIRQ_EN;
|
|
con |= CTPL | CLKEXTFREE;
|
|
} else {
|
|
host->flags &= ~HSMMC_SDIO_IRQ_ENABLED;
|
|
irq_mask &= ~CIRQ_EN;
|
|
con &= ~(CTPL | CLKEXTFREE);
|
|
}
|
|
OMAP_HSMMC_WRITE(host->base, CON, con);
|
|
OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
|
|
|
|
/*
|
|
* if enable, piggy back detection on current request
|
|
* but always disable immediately
|
|
*/
|
|
if (!host->req_in_progress || !enable)
|
|
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
|
|
|
|
/* flush posted write */
|
|
OMAP_HSMMC_READ(host->base, IE);
|
|
|
|
spin_unlock_irqrestore(&host->irq_lock, flags);
|
|
}
|
|
|
|
static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* For omaps with wake-up path, wakeirq will be irq from pinctrl and
|
|
* for other omaps, wakeirq will be from GPIO (dat line remuxed to
|
|
* gpio). wakeirq is needed to detect sdio irq in runtime suspend state
|
|
* with functional clock disabled.
|
|
*/
|
|
if (!host->dev->of_node || !host->wake_irq)
|
|
return -ENODEV;
|
|
|
|
ret = dev_pm_set_dedicated_wake_irq(host->dev, host->wake_irq);
|
|
if (ret) {
|
|
dev_err(mmc_dev(host->mmc), "Unable to request wake IRQ\n");
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Some omaps don't have wake-up path from deeper idle states
|
|
* and need to remux SDIO DAT1 to GPIO for wake-up from idle.
|
|
*/
|
|
if (host->pdata->controller_flags & OMAP_HSMMC_SWAKEUP_MISSING) {
|
|
struct pinctrl *p = devm_pinctrl_get(host->dev);
|
|
if (!p) {
|
|
ret = -ENODEV;
|
|
goto err_free_irq;
|
|
}
|
|
if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) {
|
|
dev_info(host->dev, "missing default pinctrl state\n");
|
|
devm_pinctrl_put(p);
|
|
ret = -EINVAL;
|
|
goto err_free_irq;
|
|
}
|
|
|
|
if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_IDLE))) {
|
|
dev_info(host->dev, "missing idle pinctrl state\n");
|
|
devm_pinctrl_put(p);
|
|
ret = -EINVAL;
|
|
goto err_free_irq;
|
|
}
|
|
devm_pinctrl_put(p);
|
|
}
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | IWE);
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
dev_pm_clear_wake_irq(host->dev);
|
|
err:
|
|
dev_warn(host->dev, "no SDIO IRQ support, falling back to polling\n");
|
|
host->wake_irq = 0;
|
|
return ret;
|
|
}
|
|
|
|
static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
|
|
{
|
|
u32 hctl, capa, value;
|
|
|
|
/* Only MMC1 supports 3.0V */
|
|
if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
|
|
hctl = SDVS30;
|
|
capa = VS30 | VS18;
|
|
} else {
|
|
hctl = SDVS18;
|
|
capa = VS18;
|
|
}
|
|
|
|
value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK;
|
|
OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl);
|
|
|
|
value = OMAP_HSMMC_READ(host->base, CAPA);
|
|
OMAP_HSMMC_WRITE(host->base, CAPA, value | capa);
|
|
|
|
/* Set SD bus power bit */
|
|
set_sd_bus_power(host);
|
|
}
|
|
|
|
static int omap_hsmmc_multi_io_quirk(struct mmc_card *card,
|
|
unsigned int direction, int blk_size)
|
|
{
|
|
/* This controller can't do multiblock reads due to hw bugs */
|
|
if (direction == MMC_DATA_READ)
|
|
return 1;
|
|
|
|
return blk_size;
|
|
}
|
|
|
|
static struct mmc_host_ops omap_hsmmc_ops = {
|
|
.post_req = omap_hsmmc_post_req,
|
|
.pre_req = omap_hsmmc_pre_req,
|
|
.request = omap_hsmmc_request,
|
|
.set_ios = omap_hsmmc_set_ios,
|
|
.get_cd = omap_hsmmc_get_cd,
|
|
.get_ro = mmc_gpio_get_ro,
|
|
.init_card = omap_hsmmc_init_card,
|
|
.enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
static int omap_hsmmc_regs_show(struct seq_file *s, void *data)
|
|
{
|
|
struct mmc_host *mmc = s->private;
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
seq_printf(s, "mmc%d:\n", mmc->index);
|
|
seq_printf(s, "sdio irq mode\t%s\n",
|
|
(mmc->caps & MMC_CAP_SDIO_IRQ) ? "interrupt" : "polling");
|
|
|
|
if (mmc->caps & MMC_CAP_SDIO_IRQ) {
|
|
seq_printf(s, "sdio irq \t%s\n",
|
|
(host->flags & HSMMC_SDIO_IRQ_ENABLED) ? "enabled"
|
|
: "disabled");
|
|
}
|
|
seq_printf(s, "ctx_loss:\t%d\n", host->context_loss);
|
|
|
|
pm_runtime_get_sync(host->dev);
|
|
seq_puts(s, "\nregs:\n");
|
|
seq_printf(s, "CON:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, CON));
|
|
seq_printf(s, "PSTATE:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, PSTATE));
|
|
seq_printf(s, "HCTL:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, HCTL));
|
|
seq_printf(s, "SYSCTL:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, SYSCTL));
|
|
seq_printf(s, "IE:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, IE));
|
|
seq_printf(s, "ISE:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, ISE));
|
|
seq_printf(s, "CAPA:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, CAPA));
|
|
|
|
pm_runtime_mark_last_busy(host->dev);
|
|
pm_runtime_put_autosuspend(host->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, omap_hsmmc_regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations mmc_regs_fops = {
|
|
.open = omap_hsmmc_regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void omap_hsmmc_debugfs(struct mmc_host *mmc)
|
|
{
|
|
if (mmc->debugfs_root)
|
|
debugfs_create_file("regs", S_IRUSR, mmc->debugfs_root,
|
|
mmc, &mmc_regs_fops);
|
|
}
|
|
|
|
#else
|
|
|
|
static void omap_hsmmc_debugfs(struct mmc_host *mmc)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct omap_mmc_of_data omap3_pre_es3_mmc_of_data = {
|
|
/* See 35xx errata 2.1.1.128 in SPRZ278F */
|
|
.controller_flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
|
|
};
|
|
|
|
static const struct omap_mmc_of_data omap4_mmc_of_data = {
|
|
.reg_offset = 0x100,
|
|
};
|
|
static const struct omap_mmc_of_data am33xx_mmc_of_data = {
|
|
.reg_offset = 0x100,
|
|
.controller_flags = OMAP_HSMMC_SWAKEUP_MISSING,
|
|
};
|
|
|
|
static const struct of_device_id omap_mmc_of_match[] = {
|
|
{
|
|
.compatible = "ti,omap2-hsmmc",
|
|
},
|
|
{
|
|
.compatible = "ti,omap3-pre-es3-hsmmc",
|
|
.data = &omap3_pre_es3_mmc_of_data,
|
|
},
|
|
{
|
|
.compatible = "ti,omap3-hsmmc",
|
|
},
|
|
{
|
|
.compatible = "ti,omap4-hsmmc",
|
|
.data = &omap4_mmc_of_data,
|
|
},
|
|
{
|
|
.compatible = "ti,am33xx-hsmmc",
|
|
.data = &am33xx_mmc_of_data,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
|
|
|
|
static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
|
|
{
|
|
struct omap_hsmmc_platform_data *pdata, *legacy;
|
|
struct device_node *np = dev->of_node;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return ERR_PTR(-ENOMEM); /* out of memory */
|
|
|
|
legacy = dev_get_platdata(dev);
|
|
if (legacy && legacy->name)
|
|
pdata->name = legacy->name;
|
|
|
|
if (of_find_property(np, "ti,dual-volt", NULL))
|
|
pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
|
|
|
|
pdata->gpio_cd = -EINVAL;
|
|
pdata->gpio_cod = -EINVAL;
|
|
pdata->gpio_wp = -EINVAL;
|
|
|
|
if (of_find_property(np, "ti,non-removable", NULL)) {
|
|
pdata->nonremovable = true;
|
|
pdata->no_regulator_off_init = true;
|
|
}
|
|
|
|
if (of_find_property(np, "ti,needs-special-reset", NULL))
|
|
pdata->features |= HSMMC_HAS_UPDATED_RESET;
|
|
|
|
if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
|
|
pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
|
|
|
|
return pdata;
|
|
}
|
|
#else
|
|
static inline struct omap_hsmmc_platform_data
|
|
*of_get_hsmmc_pdata(struct device *dev)
|
|
{
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
#endif
|
|
|
|
static int omap_hsmmc_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_hsmmc_platform_data *pdata = pdev->dev.platform_data;
|
|
struct mmc_host *mmc;
|
|
struct omap_hsmmc_host *host = NULL;
|
|
struct resource *res;
|
|
int ret, irq;
|
|
const struct of_device_id *match;
|
|
const struct omap_mmc_of_data *data;
|
|
void __iomem *base;
|
|
|
|
match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
|
|
if (match) {
|
|
pdata = of_get_hsmmc_pdata(&pdev->dev);
|
|
|
|
if (IS_ERR(pdata))
|
|
return PTR_ERR(pdata);
|
|
|
|
if (match->data) {
|
|
data = match->data;
|
|
pdata->reg_offset = data->reg_offset;
|
|
pdata->controller_flags |= data->controller_flags;
|
|
}
|
|
}
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&pdev->dev, "Platform Data is missing\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (res == NULL || irq < 0)
|
|
return -ENXIO;
|
|
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev);
|
|
if (!mmc) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
ret = mmc_of_parse(mmc);
|
|
if (ret)
|
|
goto err1;
|
|
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
host->pdata = pdata;
|
|
host->dev = &pdev->dev;
|
|
host->use_dma = 1;
|
|
host->dma_ch = -1;
|
|
host->irq = irq;
|
|
host->mapbase = res->start + pdata->reg_offset;
|
|
host->base = base + pdata->reg_offset;
|
|
host->power_mode = MMC_POWER_OFF;
|
|
host->next_data.cookie = 1;
|
|
host->pbias_enabled = 0;
|
|
host->vqmmc_enabled = 0;
|
|
|
|
ret = omap_hsmmc_gpio_init(mmc, host, pdata);
|
|
if (ret)
|
|
goto err_gpio;
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
if (pdev->dev.of_node)
|
|
host->wake_irq = irq_of_parse_and_map(pdev->dev.of_node, 1);
|
|
|
|
mmc->ops = &omap_hsmmc_ops;
|
|
|
|
mmc->f_min = OMAP_MMC_MIN_CLOCK;
|
|
|
|
if (pdata->max_freq > 0)
|
|
mmc->f_max = pdata->max_freq;
|
|
else if (mmc->f_max == 0)
|
|
mmc->f_max = OMAP_MMC_MAX_CLOCK;
|
|
|
|
spin_lock_init(&host->irq_lock);
|
|
|
|
host->fclk = devm_clk_get(&pdev->dev, "fck");
|
|
if (IS_ERR(host->fclk)) {
|
|
ret = PTR_ERR(host->fclk);
|
|
host->fclk = NULL;
|
|
goto err1;
|
|
}
|
|
|
|
if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) {
|
|
dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n");
|
|
omap_hsmmc_ops.multi_io_quirk = omap_hsmmc_multi_io_quirk;
|
|
}
|
|
|
|
device_init_wakeup(&pdev->dev, true);
|
|
pm_runtime_enable(host->dev);
|
|
pm_runtime_get_sync(host->dev);
|
|
pm_runtime_set_autosuspend_delay(host->dev, MMC_AUTOSUSPEND_DELAY);
|
|
pm_runtime_use_autosuspend(host->dev);
|
|
|
|
omap_hsmmc_context_save(host);
|
|
|
|
host->dbclk = devm_clk_get(&pdev->dev, "mmchsdb_fck");
|
|
/*
|
|
* MMC can still work without debounce clock.
|
|
*/
|
|
if (IS_ERR(host->dbclk)) {
|
|
host->dbclk = NULL;
|
|
} else if (clk_prepare_enable(host->dbclk) != 0) {
|
|
dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n");
|
|
host->dbclk = NULL;
|
|
}
|
|
|
|
/* Since we do only SG emulation, we can have as many segs
|
|
* as we want. */
|
|
mmc->max_segs = 1024;
|
|
|
|
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
|
|
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
|
|
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
|
|
|
|
mmc->caps |= mmc_pdata(host)->caps;
|
|
if (mmc->caps & MMC_CAP_8_BIT_DATA)
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
|
if (mmc_pdata(host)->nonremovable)
|
|
mmc->caps |= MMC_CAP_NONREMOVABLE;
|
|
|
|
mmc->pm_caps |= mmc_pdata(host)->pm_caps;
|
|
|
|
omap_hsmmc_conf_bus_power(host);
|
|
|
|
host->rx_chan = dma_request_chan(&pdev->dev, "rx");
|
|
if (IS_ERR(host->rx_chan)) {
|
|
dev_err(mmc_dev(host->mmc), "RX DMA channel request failed\n");
|
|
ret = PTR_ERR(host->rx_chan);
|
|
goto err_irq;
|
|
}
|
|
|
|
host->tx_chan = dma_request_chan(&pdev->dev, "tx");
|
|
if (IS_ERR(host->tx_chan)) {
|
|
dev_err(mmc_dev(host->mmc), "TX DMA channel request failed\n");
|
|
ret = PTR_ERR(host->tx_chan);
|
|
goto err_irq;
|
|
}
|
|
|
|
/* Request IRQ for MMC operations */
|
|
ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0,
|
|
mmc_hostname(mmc), host);
|
|
if (ret) {
|
|
dev_err(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
|
|
goto err_irq;
|
|
}
|
|
|
|
ret = omap_hsmmc_reg_get(host);
|
|
if (ret)
|
|
goto err_irq;
|
|
|
|
mmc->ocr_avail = mmc_pdata(host)->ocr_mask;
|
|
|
|
omap_hsmmc_disable_irq(host);
|
|
|
|
/*
|
|
* For now, only support SDIO interrupt if we have a separate
|
|
* wake-up interrupt configured from device tree. This is because
|
|
* the wake-up interrupt is needed for idle state and some
|
|
* platforms need special quirks. And we don't want to add new
|
|
* legacy mux platform init code callbacks any longer as we
|
|
* are moving to DT based booting anyways.
|
|
*/
|
|
ret = omap_hsmmc_configure_wake_irq(host);
|
|
if (!ret)
|
|
mmc->caps |= MMC_CAP_SDIO_IRQ;
|
|
|
|
omap_hsmmc_protect_card(host);
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
if (mmc_pdata(host)->name != NULL) {
|
|
ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
|
|
if (ret < 0)
|
|
goto err_slot_name;
|
|
}
|
|
if (host->get_cover_state) {
|
|
ret = device_create_file(&mmc->class_dev,
|
|
&dev_attr_cover_switch);
|
|
if (ret < 0)
|
|
goto err_slot_name;
|
|
}
|
|
|
|
omap_hsmmc_debugfs(mmc);
|
|
pm_runtime_mark_last_busy(host->dev);
|
|
pm_runtime_put_autosuspend(host->dev);
|
|
|
|
return 0;
|
|
|
|
err_slot_name:
|
|
mmc_remove_host(mmc);
|
|
err_irq:
|
|
device_init_wakeup(&pdev->dev, false);
|
|
if (!IS_ERR_OR_NULL(host->tx_chan))
|
|
dma_release_channel(host->tx_chan);
|
|
if (!IS_ERR_OR_NULL(host->rx_chan))
|
|
dma_release_channel(host->rx_chan);
|
|
pm_runtime_dont_use_autosuspend(host->dev);
|
|
pm_runtime_put_sync(host->dev);
|
|
pm_runtime_disable(host->dev);
|
|
if (host->dbclk)
|
|
clk_disable_unprepare(host->dbclk);
|
|
err1:
|
|
err_gpio:
|
|
mmc_free_host(mmc);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
|
|
|
|
pm_runtime_get_sync(host->dev);
|
|
mmc_remove_host(host->mmc);
|
|
|
|
dma_release_channel(host->tx_chan);
|
|
dma_release_channel(host->rx_chan);
|
|
|
|
pm_runtime_dont_use_autosuspend(host->dev);
|
|
pm_runtime_put_sync(host->dev);
|
|
pm_runtime_disable(host->dev);
|
|
device_init_wakeup(&pdev->dev, false);
|
|
if (host->dbclk)
|
|
clk_disable_unprepare(host->dbclk);
|
|
|
|
mmc_free_host(host->mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int omap_hsmmc_suspend(struct device *dev)
|
|
{
|
|
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
|
|
|
|
if (!host)
|
|
return 0;
|
|
|
|
pm_runtime_get_sync(host->dev);
|
|
|
|
if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) {
|
|
OMAP_HSMMC_WRITE(host->base, ISE, 0);
|
|
OMAP_HSMMC_WRITE(host->base, IE, 0);
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
|
|
}
|
|
|
|
if (host->dbclk)
|
|
clk_disable_unprepare(host->dbclk);
|
|
|
|
pm_runtime_put_sync(host->dev);
|
|
return 0;
|
|
}
|
|
|
|
/* Routine to resume the MMC device */
|
|
static int omap_hsmmc_resume(struct device *dev)
|
|
{
|
|
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
|
|
|
|
if (!host)
|
|
return 0;
|
|
|
|
pm_runtime_get_sync(host->dev);
|
|
|
|
if (host->dbclk)
|
|
clk_prepare_enable(host->dbclk);
|
|
|
|
if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
|
|
omap_hsmmc_conf_bus_power(host);
|
|
|
|
omap_hsmmc_protect_card(host);
|
|
pm_runtime_mark_last_busy(host->dev);
|
|
pm_runtime_put_autosuspend(host->dev);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int omap_hsmmc_runtime_suspend(struct device *dev)
|
|
{
|
|
struct omap_hsmmc_host *host;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
host = platform_get_drvdata(to_platform_device(dev));
|
|
omap_hsmmc_context_save(host);
|
|
dev_dbg(dev, "disabled\n");
|
|
|
|
spin_lock_irqsave(&host->irq_lock, flags);
|
|
if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
|
|
(host->flags & HSMMC_SDIO_IRQ_ENABLED)) {
|
|
/* disable sdio irq handling to prevent race */
|
|
OMAP_HSMMC_WRITE(host->base, ISE, 0);
|
|
OMAP_HSMMC_WRITE(host->base, IE, 0);
|
|
|
|
if (!(OMAP_HSMMC_READ(host->base, PSTATE) & DLEV_DAT(1))) {
|
|
/*
|
|
* dat1 line low, pending sdio irq
|
|
* race condition: possible irq handler running on
|
|
* multi-core, abort
|
|
*/
|
|
dev_dbg(dev, "pending sdio irq, abort suspend\n");
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN);
|
|
OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN);
|
|
pm_runtime_mark_last_busy(dev);
|
|
ret = -EBUSY;
|
|
goto abort;
|
|
}
|
|
|
|
pinctrl_pm_select_idle_state(dev);
|
|
} else {
|
|
pinctrl_pm_select_idle_state(dev);
|
|
}
|
|
|
|
abort:
|
|
spin_unlock_irqrestore(&host->irq_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_runtime_resume(struct device *dev)
|
|
{
|
|
struct omap_hsmmc_host *host;
|
|
unsigned long flags;
|
|
|
|
host = platform_get_drvdata(to_platform_device(dev));
|
|
omap_hsmmc_context_restore(host);
|
|
dev_dbg(dev, "enabled\n");
|
|
|
|
spin_lock_irqsave(&host->irq_lock, flags);
|
|
if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
|
|
(host->flags & HSMMC_SDIO_IRQ_ENABLED)) {
|
|
|
|
pinctrl_pm_select_default_state(host->dev);
|
|
|
|
/* irq lost, if pinmux incorrect */
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN);
|
|
OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN);
|
|
} else {
|
|
pinctrl_pm_select_default_state(host->dev);
|
|
}
|
|
spin_unlock_irqrestore(&host->irq_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(omap_hsmmc_suspend, omap_hsmmc_resume)
|
|
.runtime_suspend = omap_hsmmc_runtime_suspend,
|
|
.runtime_resume = omap_hsmmc_runtime_resume,
|
|
};
|
|
|
|
static struct platform_driver omap_hsmmc_driver = {
|
|
.probe = omap_hsmmc_probe,
|
|
.remove = omap_hsmmc_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.pm = &omap_hsmmc_dev_pm_ops,
|
|
.of_match_table = of_match_ptr(omap_mmc_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(omap_hsmmc_driver);
|
|
MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
MODULE_AUTHOR("Texas Instruments Inc");
|