remarkable-linux/sound/soc/codecs/wm8510.h
Mark Brown 5e357952b1 ALSA: ASoC: Add WM8510 SPI support
Implement SPI support for WM8510, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13 02:17:15 +02:00

106 lines
2.6 KiB
C

/*
* wm8510.h -- WM8510 Soc Audio driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _WM8510_H
#define _WM8510_H
/* WM8510 register space */
#define WM8510_RESET 0x0
#define WM8510_POWER1 0x1
#define WM8510_POWER2 0x2
#define WM8510_POWER3 0x3
#define WM8510_IFACE 0x4
#define WM8510_COMP 0x5
#define WM8510_CLOCK 0x6
#define WM8510_ADD 0x7
#define WM8510_GPIO 0x8
#define WM8510_DAC 0xa
#define WM8510_DACVOL 0xb
#define WM8510_ADC 0xe
#define WM8510_ADCVOL 0xf
#define WM8510_EQ1 0x12
#define WM8510_EQ2 0x13
#define WM8510_EQ3 0x14
#define WM8510_EQ4 0x15
#define WM8510_EQ5 0x16
#define WM8510_DACLIM1 0x18
#define WM8510_DACLIM2 0x19
#define WM8510_NOTCH1 0x1b
#define WM8510_NOTCH2 0x1c
#define WM8510_NOTCH3 0x1d
#define WM8510_NOTCH4 0x1e
#define WM8510_ALC1 0x20
#define WM8510_ALC2 0x21
#define WM8510_ALC3 0x22
#define WM8510_NGATE 0x23
#define WM8510_PLLN 0x24
#define WM8510_PLLK1 0x25
#define WM8510_PLLK2 0x26
#define WM8510_PLLK3 0x27
#define WM8510_ATTEN 0x28
#define WM8510_INPUT 0x2c
#define WM8510_INPPGA 0x2d
#define WM8510_ADCBOOST 0x2f
#define WM8510_OUTPUT 0x31
#define WM8510_SPKMIX 0x32
#define WM8510_SPKVOL 0x36
#define WM8510_MONOMIX 0x38
#define WM8510_CACHEREGNUM 57
/* Clock divider Id's */
#define WM8510_OPCLKDIV 0
#define WM8510_MCLKDIV 1
#define WM8510_ADCCLK 2
#define WM8510_DACCLK 3
#define WM8510_BCLKDIV 4
/* DAC clock dividers */
#define WM8510_DACCLK_F2 (1 << 3)
#define WM8510_DACCLK_F4 (0 << 3)
/* ADC clock dividers */
#define WM8510_ADCCLK_F2 (1 << 3)
#define WM8510_ADCCLK_F4 (0 << 3)
/* PLL Out dividers */
#define WM8510_OPCLKDIV_1 (0 << 4)
#define WM8510_OPCLKDIV_2 (1 << 4)
#define WM8510_OPCLKDIV_3 (2 << 4)
#define WM8510_OPCLKDIV_4 (3 << 4)
/* BCLK clock dividers */
#define WM8510_BCLKDIV_1 (0 << 2)
#define WM8510_BCLKDIV_2 (1 << 2)
#define WM8510_BCLKDIV_4 (2 << 2)
#define WM8510_BCLKDIV_8 (3 << 2)
#define WM8510_BCLKDIV_16 (4 << 2)
#define WM8510_BCLKDIV_32 (5 << 2)
/* MCLK clock dividers */
#define WM8510_MCLKDIV_1 (0 << 5)
#define WM8510_MCLKDIV_1_5 (1 << 5)
#define WM8510_MCLKDIV_2 (2 << 5)
#define WM8510_MCLKDIV_3 (3 << 5)
#define WM8510_MCLKDIV_4 (4 << 5)
#define WM8510_MCLKDIV_6 (5 << 5)
#define WM8510_MCLKDIV_8 (6 << 5)
#define WM8510_MCLKDIV_12 (7 << 5)
struct wm8510_setup_data {
int spi;
int i2c_bus;
unsigned short i2c_address;
};
extern struct snd_soc_dai wm8510_dai;
extern struct snd_soc_codec_device soc_codec_dev_wm8510;
#endif