redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity
remarkable-linux/drivers/tty/serial/sirfsoc_uart.h
Barry Song 205c384f73 serial: sirf: move to writel for TXFIFO instead of writeb 
All SiRFSoC UART registers are in 32-bits. If we use writeb for
TXFIFO, actually all of 32-bits are still written, for TXTIFO,
only low 8-bits are valid, so in prima2&atlas6, this causes no
problem.
But in the new atlas7, using writeb to write UART registers will
cause an imprecise data abort as HW does check the "wrong" writeb.
So move to writel and this also makes the code consistent with
sirfsoc_uart_pio_tx_chars() in which we use writel.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28 12:22:43 -07:00

455 lines
13 KiB
C
Raw Blame History

/*
* Drivers for CSR SiRFprimaII onboard UARTs.
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/bitops.h>
struct sirfsoc_uart_param {
const char *uart_name;
const char *port_name;
u32 uart_nr;
u32 register_uart_nr;
};
struct sirfsoc_register {
/* hardware uart specific */
u32 sirfsoc_line_ctrl;
u32 sirfsoc_divisor;
/* uart - usp common */
u32 sirfsoc_tx_rx_en;
u32 sirfsoc_int_en_reg;
u32 sirfsoc_int_st_reg;
u32 sirfsoc_tx_dma_io_ctrl;
u32 sirfsoc_tx_dma_io_len;
u32 sirfsoc_tx_fifo_ctrl;
u32 sirfsoc_tx_fifo_level_chk;
u32 sirfsoc_tx_fifo_op;
u32 sirfsoc_tx_fifo_status;
u32 sirfsoc_tx_fifo_data;
u32 sirfsoc_rx_dma_io_ctrl;
u32 sirfsoc_rx_dma_io_len;
u32 sirfsoc_rx_fifo_ctrl;
u32 sirfsoc_rx_fifo_level_chk;
u32 sirfsoc_rx_fifo_op;
u32 sirfsoc_rx_fifo_status;
u32 sirfsoc_rx_fifo_data;
u32 sirfsoc_afc_ctrl;
u32 sirfsoc_swh_dma_io;
/* hardware usp specific */
u32 sirfsoc_mode1;
u32 sirfsoc_mode2;
u32 sirfsoc_tx_frame_ctrl;
u32 sirfsoc_rx_frame_ctrl;
u32 sirfsoc_async_param_reg;
};
typedef u32 (*fifo_full_mask)(int line);
typedef u32 (*fifo_empty_mask)(int line);
struct sirfsoc_fifo_status {
fifo_full_mask ff_full;
fifo_empty_mask ff_empty;
};
struct sirfsoc_int_en {
u32 sirfsoc_rx_done_en;
u32 sirfsoc_tx_done_en;
u32 sirfsoc_rx_oflow_en;
u32 sirfsoc_tx_allout_en;
u32 sirfsoc_rx_io_dma_en;
u32 sirfsoc_tx_io_dma_en;
u32 sirfsoc_rxfifo_full_en;
u32 sirfsoc_txfifo_empty_en;
u32 sirfsoc_rxfifo_thd_en;
u32 sirfsoc_txfifo_thd_en;
u32 sirfsoc_frm_err_en;
u32 sirfsoc_rxd_brk_en;
u32 sirfsoc_rx_timeout_en;
u32 sirfsoc_parity_err_en;
u32 sirfsoc_cts_en;
u32 sirfsoc_rts_en;
};
struct sirfsoc_int_status {
u32 sirfsoc_rx_done;
u32 sirfsoc_tx_done;
u32 sirfsoc_rx_oflow;
u32 sirfsoc_tx_allout;
u32 sirfsoc_rx_io_dma;
u32 sirfsoc_tx_io_dma;
u32 sirfsoc_rxfifo_full;
u32 sirfsoc_txfifo_empty;
u32 sirfsoc_rxfifo_thd;
u32 sirfsoc_txfifo_thd;
u32 sirfsoc_frm_err;
u32 sirfsoc_rxd_brk;
u32 sirfsoc_rx_timeout;
u32 sirfsoc_parity_err;
u32 sirfsoc_cts;
u32 sirfsoc_rts;
};
enum sirfsoc_uart_type {
SIRF_REAL_UART,
SIRF_USP_UART,
};
struct sirfsoc_uart_register {
struct sirfsoc_register uart_reg;
struct sirfsoc_int_en uart_int_en;
struct sirfsoc_int_status uart_int_st;
struct sirfsoc_fifo_status fifo_status;
struct sirfsoc_uart_param uart_param;
enum sirfsoc_uart_type uart_type;
};
u32 usp_ff_full(int line)
{
return 0x80;
}
u32 usp_ff_empty(int line)
{
return 0x100;
}
u32 uart_ff_full(int line)
{
return (line == 1) ? (0x20) : (0x80);
}
u32 uart_ff_empty(int line)
{
return (line == 1) ? (0x40) : (0x100);
}
struct sirfsoc_uart_register sirfsoc_usp = {
.uart_reg = {
.sirfsoc_mode1 = 0x0000,
.sirfsoc_mode2 = 0x0004,
.sirfsoc_tx_frame_ctrl = 0x0008,
.sirfsoc_rx_frame_ctrl = 0x000c,
.sirfsoc_tx_rx_en = 0x0010,
.sirfsoc_int_en_reg = 0x0014,
.sirfsoc_int_st_reg = 0x0018,
.sirfsoc_async_param_reg = 0x0024,
.sirfsoc_tx_dma_io_ctrl = 0x0100,
.sirfsoc_tx_dma_io_len = 0x0104,
.sirfsoc_tx_fifo_ctrl = 0x0108,
.sirfsoc_tx_fifo_level_chk = 0x010c,
.sirfsoc_tx_fifo_op = 0x0110,
.sirfsoc_tx_fifo_status = 0x0114,
.sirfsoc_tx_fifo_data = 0x0118,
.sirfsoc_rx_dma_io_ctrl = 0x0120,
.sirfsoc_rx_dma_io_len = 0x0124,
.sirfsoc_rx_fifo_ctrl = 0x0128,
.sirfsoc_rx_fifo_level_chk = 0x012c,
.sirfsoc_rx_fifo_op = 0x0130,
.sirfsoc_rx_fifo_status = 0x0134,
.sirfsoc_rx_fifo_data = 0x0138,
},
.uart_int_en = {
.sirfsoc_rx_done_en = BIT(0),
.sirfsoc_tx_done_en = BIT(1),
.sirfsoc_rx_oflow_en = BIT(2),
.sirfsoc_tx_allout_en = BIT(3),
.sirfsoc_rx_io_dma_en = BIT(4),
.sirfsoc_tx_io_dma_en = BIT(5),
.sirfsoc_rxfifo_full_en = BIT(6),
.sirfsoc_txfifo_empty_en = BIT(7),
.sirfsoc_rxfifo_thd_en = BIT(8),
.sirfsoc_txfifo_thd_en = BIT(9),
.sirfsoc_frm_err_en = BIT(10),
.sirfsoc_rx_timeout_en = BIT(11),
.sirfsoc_rxd_brk_en = BIT(15),
},
.uart_int_st = {
.sirfsoc_rx_done = BIT(0),
.sirfsoc_tx_done = BIT(1),
.sirfsoc_rx_oflow = BIT(2),
.sirfsoc_tx_allout = BIT(3),
.sirfsoc_rx_io_dma = BIT(4),
.sirfsoc_tx_io_dma = BIT(5),
.sirfsoc_rxfifo_full = BIT(6),
.sirfsoc_txfifo_empty = BIT(7),
.sirfsoc_rxfifo_thd = BIT(8),
.sirfsoc_txfifo_thd = BIT(9),
.sirfsoc_frm_err = BIT(10),
.sirfsoc_rx_timeout = BIT(11),
.sirfsoc_rxd_brk = BIT(15),
},
.fifo_status = {
.ff_full = usp_ff_full,
.ff_empty = usp_ff_empty,
},
.uart_param = {
.uart_name = "ttySiRF",
.port_name = "sirfsoc-uart",
.uart_nr = 2,
.register_uart_nr = 3,
},
};
struct sirfsoc_uart_register sirfsoc_uart = {
.uart_reg = {
.sirfsoc_line_ctrl = 0x0040,
.sirfsoc_tx_rx_en = 0x004c,
.sirfsoc_divisor = 0x0050,
.sirfsoc_int_en_reg = 0x0054,
.sirfsoc_int_st_reg = 0x0058,
.sirfsoc_tx_dma_io_ctrl = 0x0100,
.sirfsoc_tx_dma_io_len = 0x0104,
.sirfsoc_tx_fifo_ctrl = 0x0108,
.sirfsoc_tx_fifo_level_chk = 0x010c,
.sirfsoc_tx_fifo_op = 0x0110,
.sirfsoc_tx_fifo_status = 0x0114,
.sirfsoc_tx_fifo_data = 0x0118,
.sirfsoc_rx_dma_io_ctrl = 0x0120,
.sirfsoc_rx_dma_io_len = 0x0124,
.sirfsoc_rx_fifo_ctrl = 0x0128,
.sirfsoc_rx_fifo_level_chk = 0x012c,
.sirfsoc_rx_fifo_op = 0x0130,
.sirfsoc_rx_fifo_status = 0x0134,
.sirfsoc_rx_fifo_data = 0x0138,
.sirfsoc_afc_ctrl = 0x0140,
.sirfsoc_swh_dma_io = 0x0148,
},
.uart_int_en = {
.sirfsoc_rx_done_en = BIT(0),
.sirfsoc_tx_done_en = BIT(1),
.sirfsoc_rx_oflow_en = BIT(2),
.sirfsoc_tx_allout_en = BIT(3),
.sirfsoc_rx_io_dma_en = BIT(4),
.sirfsoc_tx_io_dma_en = BIT(5),
.sirfsoc_rxfifo_full_en = BIT(6),
.sirfsoc_txfifo_empty_en = BIT(7),
.sirfsoc_rxfifo_thd_en = BIT(8),
.sirfsoc_txfifo_thd_en = BIT(9),
.sirfsoc_frm_err_en = BIT(10),
.sirfsoc_rxd_brk_en = BIT(11),
.sirfsoc_rx_timeout_en = BIT(12),
.sirfsoc_parity_err_en = BIT(13),
.sirfsoc_cts_en = BIT(14),
.sirfsoc_rts_en = BIT(15),
},
.uart_int_st = {
.sirfsoc_rx_done = BIT(0),
.sirfsoc_tx_done = BIT(1),
.sirfsoc_rx_oflow = BIT(2),
.sirfsoc_tx_allout = BIT(3),
.sirfsoc_rx_io_dma = BIT(4),
.sirfsoc_tx_io_dma = BIT(5),
.sirfsoc_rxfifo_full = BIT(6),
.sirfsoc_txfifo_empty = BIT(7),
.sirfsoc_rxfifo_thd = BIT(8),
.sirfsoc_txfifo_thd = BIT(9),
.sirfsoc_frm_err = BIT(10),
.sirfsoc_rxd_brk = BIT(11),
.sirfsoc_rx_timeout = BIT(12),
.sirfsoc_parity_err = BIT(13),
.sirfsoc_cts = BIT(14),
.sirfsoc_rts = BIT(15),
},
.fifo_status = {
.ff_full = uart_ff_full,
.ff_empty = uart_ff_empty,
},
.uart_param = {
.uart_name = "ttySiRF",
.port_name = "sirfsoc_uart",
.uart_nr = 3,
.register_uart_nr = 0,
},
};
/* uart io ctrl */
#define SIRFUART_DATA_BIT_LEN_MASK 0x3
#define SIRFUART_DATA_BIT_LEN_5 BIT(0)
#define SIRFUART_DATA_BIT_LEN_6 1
#define SIRFUART_DATA_BIT_LEN_7 2
#define SIRFUART_DATA_BIT_LEN_8 3
#define SIRFUART_STOP_BIT_LEN_1 0
#define SIRFUART_STOP_BIT_LEN_2 BIT(2)
#define SIRFUART_PARITY_EN BIT(3)
#define SIRFUART_EVEN_BIT BIT(4)
#define SIRFUART_STICK_BIT_MASK (7 << 3)
#define SIRFUART_STICK_BIT_NONE (0 << 3)
#define SIRFUART_STICK_BIT_EVEN BIT(3)
#define SIRFUART_STICK_BIT_ODD (3 << 3)
#define SIRFUART_STICK_BIT_MARK (5 << 3)
#define SIRFUART_STICK_BIT_SPACE (7 << 3)
#define SIRFUART_SET_BREAK BIT(6)
#define SIRFUART_LOOP_BACK BIT(7)
#define SIRFUART_PARITY_MASK (7 << 3)
#define SIRFUART_DUMMY_READ BIT(16)
#define SIRFUART_AFC_CTRL_RX_THD 0x70
#define SIRFUART_AFC_RX_EN BIT(8)
#define SIRFUART_AFC_TX_EN BIT(9)
#define SIRFUART_AFC_CTS_CTRL BIT(10)
#define SIRFUART_AFC_RTS_CTRL BIT(11)
#define SIRFUART_AFC_CTS_STATUS BIT(12)
#define SIRFUART_AFC_RTS_STATUS BIT(13)
/* UART FIFO Register */
#define SIRFUART_FIFO_STOP 0x0
#define SIRFUART_FIFO_RESET BIT(0)
#define SIRFUART_FIFO_START BIT(1)
#define SIRFUART_RX_EN BIT(0)
#define SIRFUART_TX_EN BIT(1)
#define SIRFUART_IO_MODE BIT(0)
#define SIRFUART_DMA_MODE 0x0
/* Macro Specific*/
#define SIRFUART_INT_EN_CLR 0x0060
/* Baud Rate Calculation */
#define SIRF_MIN_SAMPLE_DIV 0xf
#define SIRF_MAX_SAMPLE_DIV 0x3f
#define SIRF_IOCLK_DIV_MAX 0xffff
#define SIRF_SAMPLE_DIV_SHIFT 16
#define SIRF_IOCLK_DIV_MASK 0xffff
#define SIRF_SAMPLE_DIV_MASK 0x3f0000
#define SIRF_BAUD_RATE_SUPPORT_NR 18
/* USP SPEC */
#define SIRFSOC_USP_ENDIAN_CTRL_LSBF BIT(4)
#define SIRFSOC_USP_EN BIT(5)
#define SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET 0
#define SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET 8
#define SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK 0x3ff
#define SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET 21
#define SIRFSOC_USP_TX_DATA_LEN_OFFSET 0
#define SIRFSOC_USP_TX_SYNC_LEN_OFFSET 8
#define SIRFSOC_USP_TX_FRAME_LEN_OFFSET 16
#define SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET 24
#define SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET 30
#define SIRFSOC_USP_RX_DATA_LEN_OFFSET 0
#define SIRFSOC_USP_RX_FRAME_LEN_OFFSET 8
#define SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET 16
#define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24
#define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f
#define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16
/* USP-UART Common */
#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000)
#define SIRFUART_RECV_TIMEOUT_VALUE(x) \
(((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF))
#define SIRFUART_RECV_TIMEOUT(port, x) \
(((port)->line > 2) ? (x & 0xFFFF) : ((x) & 0xFFFF) << 16)
#define SIRFUART_FIFO_THD(port) ((port->line) == 1 ? 16 : 64)
#define SIRFUART_ERR_INT_STAT(port, unit_st) \
(uint_st->sirfsoc_rx_oflow | \
uint_st->sirfsoc_frm_err | \
uint_st->sirfsoc_rxd_brk | \
((port->line > 2) ? 0 : uint_st->sirfsoc_parity_err))
#define SIRFUART_RX_IO_INT_EN(port, uint_en) \
(uint_en->sirfsoc_rx_timeout_en |\
uint_en->sirfsoc_rxfifo_thd_en |\
uint_en->sirfsoc_rxfifo_full_en |\
uint_en->sirfsoc_frm_err_en |\
uint_en->sirfsoc_rx_oflow_en |\
uint_en->sirfsoc_rxd_brk_en |\
((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en))
#define SIRFUART_RX_IO_INT_ST(uint_st) \
(uint_st->sirfsoc_rx_timeout |\
uint_st->sirfsoc_rxfifo_thd |\
uint_st->sirfsoc_rxfifo_full)
#define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts)
#define SIRFUART_RX_DMA_INT_EN(port, uint_en) \
(uint_en->sirfsoc_rx_timeout_en |\
uint_en->sirfsoc_frm_err_en |\
uint_en->sirfsoc_rx_oflow_en |\
uint_en->sirfsoc_rxd_brk_en |\
((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en))
/* Generic Definitions */
#define SIRFSOC_UART_NAME "ttySiRF"
#define SIRFSOC_UART_MAJOR 0
#define SIRFSOC_UART_MINOR 0
#define SIRFUART_PORT_NAME "sirfsoc-uart"
#define SIRFUART_MAP_SIZE 0x200
#define SIRFSOC_UART_NR 6
#define SIRFSOC_PORT_TYPE 0xa5
/* Uart Common Use Macro*/
#define SIRFSOC_RX_DMA_BUF_SIZE 256
#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3)
#define LOOP_DMA_BUFA_FILL 1
#define LOOP_DMA_BUFB_FILL 2
#define TX_TRAN_PIO 1
#define TX_TRAN_DMA 2
/* Uart Fifo Level Chk */
#define SIRFUART_TX_FIFO_SC_OFFSET 0
#define SIRFUART_TX_FIFO_LC_OFFSET 10
#define SIRFUART_TX_FIFO_HC_OFFSET 20
#define SIRFUART_TX_FIFO_CHK_SC(line, value) ((((line) == 1) ? (value & 0x3) :\
(value & 0x1f)) << SIRFUART_TX_FIFO_SC_OFFSET)
#define SIRFUART_TX_FIFO_CHK_LC(line, value) ((((line) == 1) ? (value & 0x3) :\
(value & 0x1f)) << SIRFUART_TX_FIFO_LC_OFFSET)
#define SIRFUART_TX_FIFO_CHK_HC(line, value) ((((line) == 1) ? (value & 0x3) :\
(value & 0x1f)) << SIRFUART_TX_FIFO_HC_OFFSET)
#define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC
#define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC
#define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC
/* Indicate how many buffers used */
#define SIRFSOC_RX_LOOP_BUF_CNT 2
/* For Fast Baud Rate Calculation */
struct sirfsoc_baudrate_to_regv {
unsigned int baud_rate;
unsigned int reg_val;
};
enum sirfsoc_tx_state {
TX_DMA_IDLE,
TX_DMA_RUNNING,
TX_DMA_PAUSE,
};
struct sirfsoc_loop_buffer {
struct circ_buf xmit;
dma_cookie_t cookie;
struct dma_async_tx_descriptor *desc;
dma_addr_t dma_addr;
};
struct sirfsoc_uart_port {
bool hw_flow_ctrl;
bool ms_enabled;
struct uart_port port;
struct clk *clk;
/* for SiRFmarco, there are SET/CLR for UART_INT_EN */
bool is_marco;
struct sirfsoc_uart_register *uart_reg;
struct dma_chan *rx_dma_chan;
struct dma_chan *tx_dma_chan;
dma_addr_t tx_dma_addr;
struct dma_async_tx_descriptor *tx_dma_desc;
spinlock_t rx_lock;
spinlock_t tx_lock;
struct tasklet_struct rx_dma_complete_tasklet;
struct tasklet_struct rx_tmo_process_tasklet;
unsigned int rx_io_count;
unsigned long transfer_size;
enum sirfsoc_tx_state tx_dma_state;
unsigned int cts_gpio;
unsigned int rts_gpio;
struct sirfsoc_loop_buffer rx_dma_items[SIRFSOC_RX_LOOP_BUF_CNT];
int rx_completed;
int rx_issued;
};
/* Register Access Control */
#define portaddr(port, reg) ((port)->membase + (reg))
#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
/* UART Port Mask */
#define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f))
#define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80))
#define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100))
/* I/O Mode */
#define SIRFSOC_UART_IO_RX_MAX_CNT 256
#define SIRFSOC_UART_IO_TX_REASONABLE_CNT 6
View git blame Copy permalink