2956b5d94a
Currently we already have two pin configuration related callbacks available for GPIO chips .set_single_ended() and .set_debounce(). In future we expect to have even more, which does not scale well if we need to add yet another callback to the GPIO chip structure for each possible configuration parameter. Better solution is to reuse what we already have available in the generic pinconf. To support this, we introduce a new .set_config() callback for GPIO chips. The callback takes a single packed pin configuration value as parameter. This can then be extended easily beyond what is currently supported by just adding new types to the generic pinconf enum. If the GPIO driver is backed up by a pinctrl driver the GPIO driver can just assign gpiochip_generic_config() (introduced in this patch) to .set_config and that will take care configuration requests are directed to the pinctrl driver. We then convert the existing drivers over .set_config() and finally remove the .set_single_ended() and .set_debounce() callbacks. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
247 lines
6.2 KiB
C
247 lines
6.2 KiB
C
/*
|
|
* Copyright 2015 Verifone Int.
|
|
*
|
|
* Author: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify i t
|
|
* under the terms of the GNU General Public License as published by th e
|
|
* Free Software Foundation; either version 2 of the License, or (at you r
|
|
* option) any later version.
|
|
*
|
|
* This driver is based on the gpio-tps65912 implementation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/tps65218.h>
|
|
|
|
struct tps65218_gpio {
|
|
struct tps65218 *tps65218;
|
|
struct gpio_chip gpio_chip;
|
|
};
|
|
|
|
static int tps65218_gpio_get(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
|
|
struct tps65218 *tps65218 = tps65218_gpio->tps65218;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(tps65218->regmap, TPS65218_REG_ENABLE2, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(val & (TPS65218_ENABLE2_GPIO1 << offset));
|
|
}
|
|
|
|
static void tps65218_gpio_set(struct gpio_chip *gc, unsigned offset,
|
|
int value)
|
|
{
|
|
struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
|
|
struct tps65218 *tps65218 = tps65218_gpio->tps65218;
|
|
|
|
if (value)
|
|
tps65218_set_bits(tps65218, TPS65218_REG_ENABLE2,
|
|
TPS65218_ENABLE2_GPIO1 << offset,
|
|
TPS65218_ENABLE2_GPIO1 << offset,
|
|
TPS65218_PROTECT_L1);
|
|
else
|
|
tps65218_clear_bits(tps65218, TPS65218_REG_ENABLE2,
|
|
TPS65218_ENABLE2_GPIO1 << offset,
|
|
TPS65218_PROTECT_L1);
|
|
}
|
|
|
|
static int tps65218_gpio_output(struct gpio_chip *gc, unsigned offset,
|
|
int value)
|
|
{
|
|
/* Only drives GPOs */
|
|
tps65218_gpio_set(gc, offset, value);
|
|
return 0;
|
|
}
|
|
|
|
static int tps65218_gpio_input(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
return -EPERM;
|
|
}
|
|
|
|
static int tps65218_gpio_request(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
|
|
struct tps65218 *tps65218 = tps65218_gpio->tps65218;
|
|
int ret;
|
|
|
|
if (gpiochip_line_is_open_source(gc, offset)) {
|
|
dev_err(gc->parent, "can't work as open source\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (offset) {
|
|
case 0:
|
|
if (!gpiochip_line_is_open_drain(gc, offset)) {
|
|
dev_err(gc->parent, "GPO1 works only as open drain\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Disable sequencer for GPO1 */
|
|
ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7,
|
|
TPS65218_SEQ7_GPO1_SEQ_MASK,
|
|
TPS65218_PROTECT_L1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Setup GPO1 */
|
|
ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1,
|
|
TPS65218_CONFIG1_IO1_SEL,
|
|
TPS65218_PROTECT_L1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
break;
|
|
case 1:
|
|
/* Setup GPO2 */
|
|
ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG1,
|
|
TPS65218_CONFIG1_IO1_SEL,
|
|
TPS65218_PROTECT_L1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
if (!gpiochip_line_is_open_drain(gc, offset)) {
|
|
dev_err(gc->parent, "GPO3 works only as open drain\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Disable sequencer for GPO3 */
|
|
ret = tps65218_clear_bits(tps65218, TPS65218_REG_SEQ7,
|
|
TPS65218_SEQ7_GPO3_SEQ_MASK,
|
|
TPS65218_PROTECT_L1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Setup GPO3 */
|
|
ret = tps65218_clear_bits(tps65218, TPS65218_REG_CONFIG2,
|
|
TPS65218_CONFIG2_DC12_RST,
|
|
TPS65218_PROTECT_L1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tps65218_gpio_set_config(struct gpio_chip *gc, unsigned offset,
|
|
unsigned long config)
|
|
{
|
|
struct tps65218_gpio *tps65218_gpio = gpiochip_get_data(gc);
|
|
struct tps65218 *tps65218 = tps65218_gpio->tps65218;
|
|
enum pin_config_param param = pinconf_to_config_param(config);
|
|
|
|
switch (offset) {
|
|
case 0:
|
|
case 2:
|
|
/* GPO1 is hardwired to be open drain */
|
|
if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
|
|
return 0;
|
|
return -ENOTSUPP;
|
|
case 1:
|
|
/* GPO2 is push-pull by default, can be set as open drain. */
|
|
if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
|
|
return tps65218_clear_bits(tps65218,
|
|
TPS65218_REG_CONFIG1,
|
|
TPS65218_CONFIG1_GPO2_BUF,
|
|
TPS65218_PROTECT_L1);
|
|
if (param == PIN_CONFIG_DRIVE_PUSH_PULL)
|
|
return tps65218_set_bits(tps65218,
|
|
TPS65218_REG_CONFIG1,
|
|
TPS65218_CONFIG1_GPO2_BUF,
|
|
TPS65218_CONFIG1_GPO2_BUF,
|
|
TPS65218_PROTECT_L1);
|
|
return -ENOTSUPP;
|
|
default:
|
|
break;
|
|
}
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static const struct gpio_chip template_chip = {
|
|
.label = "gpio-tps65218",
|
|
.owner = THIS_MODULE,
|
|
.request = tps65218_gpio_request,
|
|
.direction_output = tps65218_gpio_output,
|
|
.direction_input = tps65218_gpio_input,
|
|
.get = tps65218_gpio_get,
|
|
.set = tps65218_gpio_set,
|
|
.set_config = tps65218_gpio_set_config,
|
|
.can_sleep = true,
|
|
.ngpio = 3,
|
|
.base = -1,
|
|
};
|
|
|
|
static int tps65218_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct tps65218 *tps65218 = dev_get_drvdata(pdev->dev.parent);
|
|
struct tps65218_gpio *tps65218_gpio;
|
|
int ret;
|
|
|
|
tps65218_gpio = devm_kzalloc(&pdev->dev, sizeof(*tps65218_gpio),
|
|
GFP_KERNEL);
|
|
if (!tps65218_gpio)
|
|
return -ENOMEM;
|
|
|
|
tps65218_gpio->tps65218 = tps65218;
|
|
tps65218_gpio->gpio_chip = template_chip;
|
|
tps65218_gpio->gpio_chip.parent = &pdev->dev;
|
|
#ifdef CONFIG_OF_GPIO
|
|
tps65218_gpio->gpio_chip.of_node = pdev->dev.of_node;
|
|
#endif
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &tps65218_gpio->gpio_chip,
|
|
tps65218_gpio);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to register gpiochip, %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, tps65218_gpio);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id tps65218_dt_match[] = {
|
|
{ .compatible = "ti,tps65218-gpio" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tps65218_dt_match);
|
|
|
|
static const struct platform_device_id tps65218_gpio_id_table[] = {
|
|
{ "tps65218-gpio", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, tps65218_gpio_id_table);
|
|
|
|
static struct platform_driver tps65218_gpio_driver = {
|
|
.driver = {
|
|
.name = "tps65218-gpio",
|
|
.of_match_table = of_match_ptr(tps65218_dt_match)
|
|
},
|
|
.probe = tps65218_gpio_probe,
|
|
.id_table = tps65218_gpio_id_table,
|
|
};
|
|
|
|
module_platform_driver(tps65218_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
|
|
MODULE_DESCRIPTION("GPO interface for TPS65218 PMICs");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:tps65218-gpio");
|