remarkable-linux/net/tipc/link.h
Jon Paul Maloy ed193ece26 tipc: simplify link mtu negotiation
When a link is being established, the two endpoints advertise their
respective interface MTU in the transmitted RESET and ACTIVATE messages.
If there is any difference, the lower of the two MTUs will be selected
for use by both endpoints.

However, as a remnant of earlier attempts to introduce TIPC level
routing. there also exists an MTU discovery mechanism. If an intermediate
node has a lower MTU than the two endpoints, they will discover this
through a bisectional approach, and finally adopt this MTU for common use.

Since there is no TIPC level routing, and probably never will be,
this mechanism doesn't make any sense, and only serves to make the
link level protocol unecessarily complex.

In this commit, we eliminate the MTU discovery algorithm,and fall back
to the simple MTU advertising approach. This change is fully backwards
compatible.

Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 16:27:12 -04:00

312 lines
10 KiB
C

/*
* net/tipc/link.h: Include file for TIPC link code
*
* Copyright (c) 1995-2006, 2013-2014, Ericsson AB
* Copyright (c) 2004-2005, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_LINK_H
#define _TIPC_LINK_H
#include <net/genetlink.h>
#include "msg.h"
#include "node.h"
/* TIPC-specific error codes
*/
#define ELINKCONG EAGAIN /* link congestion <=> resource unavailable */
/* Out-of-range value for link sequence numbers
*/
#define INVALID_LINK_SEQ 0x10000
/* Link working states
*/
#define WORKING_WORKING 560810u
#define WORKING_UNKNOWN 560811u
#define RESET_UNKNOWN 560812u
#define RESET_RESET 560813u
/* Link endpoint execution states
*/
#define LINK_STARTED 0x0001
#define LINK_STOPPED 0x0002
#define LINK_SYNCHING 0x0004
#define LINK_FAILINGOVER 0x0008
/* Starting value for maximum packet size negotiation on unicast links
* (unless bearer MTU is less)
*/
#define MAX_PKT_DEFAULT 1500
struct tipc_stats {
u32 sent_info; /* used in counting # sent packets */
u32 recv_info; /* used in counting # recv'd packets */
u32 sent_states;
u32 recv_states;
u32 sent_probes;
u32 recv_probes;
u32 sent_nacks;
u32 recv_nacks;
u32 sent_acks;
u32 sent_bundled;
u32 sent_bundles;
u32 recv_bundled;
u32 recv_bundles;
u32 retransmitted;
u32 sent_fragmented;
u32 sent_fragments;
u32 recv_fragmented;
u32 recv_fragments;
u32 link_congs; /* # port sends blocked by congestion */
u32 deferred_recv;
u32 duplicates;
u32 max_queue_sz; /* send queue size high water mark */
u32 accu_queue_sz; /* used for send queue size profiling */
u32 queue_sz_counts; /* used for send queue size profiling */
u32 msg_length_counts; /* used for message length profiling */
u32 msg_lengths_total; /* used for message length profiling */
u32 msg_length_profile[7]; /* used for msg. length profiling */
};
/**
* struct tipc_link - TIPC link data structure
* @addr: network address of link's peer node
* @name: link name character string
* @media_addr: media address to use when sending messages over link
* @timer: link timer
* @owner: pointer to peer node
* @refcnt: reference counter for permanent references (owner node & timer)
* @flags: execution state flags for link endpoint instance
* @checkpoint: reference point for triggering link continuity checking
* @peer_session: link session # being used by peer end of link
* @peer_bearer_id: bearer id used by link's peer endpoint
* @bearer_id: local bearer id used by link
* @tolerance: minimum link continuity loss needed to reset link [in ms]
* @cont_intv: link continuity testing interval
* @abort_limit: # of unacknowledged continuity probes needed to reset link
* @state: current state of link FSM
* @fsm_msg_cnt: # of protocol messages link FSM has sent in current state
* @proto_msg: template for control messages generated by link
* @pmsg: convenience pointer to "proto_msg" field
* @priority: current link priority
* @net_plane: current link network plane ('A' through 'H')
* @backlog_limit: backlog queue congestion thresholds (indexed by importance)
* @exp_msg_count: # of tunnelled messages expected during link changeover
* @reset_checkpoint: seq # of last acknowledged message at time of link reset
* @mtu: current maximum packet size for this link
* @advertised_mtu: advertised own mtu when link is being established
* @transmitq: queue for sent, non-acked messages
* @backlogq: queue for messages waiting to be sent
* @next_out_no: next sequence number to use for outbound messages
* @last_retransmitted: sequence number of most recently retransmitted message
* @stale_count: # of identical retransmit requests made by peer
* @next_in_no: next sequence number to expect for inbound messages
* @deferred_queue: deferred queue saved OOS b'cast message received from node
* @unacked_window: # of inbound messages rx'd without ack'ing back to peer
* @inputq: buffer queue for messages to be delivered upwards
* @namedq: buffer queue for name table messages to be delivered upwards
* @next_out: ptr to first unsent outbound message in queue
* @wakeupq: linked list of wakeup msgs waiting for link congestion to abate
* @long_msg_seq_no: next identifier to use for outbound fragmented messages
* @reasm_buf: head of partially reassembled inbound message fragments
* @stats: collects statistics regarding link activity
*/
struct tipc_link {
u32 addr;
char name[TIPC_MAX_LINK_NAME];
struct tipc_media_addr media_addr;
struct timer_list timer;
struct tipc_node *owner;
struct kref ref;
/* Management and link supervision data */
unsigned int flags;
u32 checkpoint;
u32 peer_session;
u32 peer_bearer_id;
u32 bearer_id;
u32 tolerance;
unsigned long cont_intv;
u32 abort_limit;
int state;
u32 fsm_msg_cnt;
struct {
unchar hdr[INT_H_SIZE];
unchar body[TIPC_MAX_IF_NAME];
} proto_msg;
struct tipc_msg *pmsg;
u32 priority;
char net_plane;
u16 synch_point;
/* Failover */
u16 failover_pkts;
u16 failover_checkpt;
struct sk_buff *failover_skb;
/* Max packet negotiation */
u16 mtu;
u16 advertised_mtu;
/* Sending */
struct sk_buff_head transmq;
struct sk_buff_head backlogq;
struct {
u16 len;
u16 limit;
} backlog[5];
u32 next_out_no;
u32 window;
u32 last_retransmitted;
u32 stale_count;
/* Reception */
u32 next_in_no;
u32 rcv_unacked;
struct sk_buff_head deferdq;
struct sk_buff_head inputq;
struct sk_buff_head namedq;
/* Congestion handling */
struct sk_buff_head wakeupq;
/* Fragmentation/reassembly */
struct sk_buff *reasm_buf;
/* Statistics */
struct tipc_stats stats;
};
struct tipc_port;
struct tipc_link *tipc_link_create(struct tipc_node *n_ptr,
struct tipc_bearer *b_ptr,
const struct tipc_media_addr *media_addr);
void tipc_link_delete(struct tipc_link *link);
void tipc_link_delete_list(struct net *net, unsigned int bearer_id,
bool shutting_down);
void tipc_link_failover_send_queue(struct tipc_link *l_ptr);
void tipc_link_dup_queue_xmit(struct tipc_link *l_ptr, struct tipc_link *dest);
void tipc_link_reset_fragments(struct tipc_link *l_ptr);
int tipc_link_is_up(struct tipc_link *l_ptr);
int tipc_link_is_active(struct tipc_link *l_ptr);
void tipc_link_purge_queues(struct tipc_link *l_ptr);
void tipc_link_reset_all(struct tipc_node *node);
void tipc_link_reset(struct tipc_link *l_ptr);
void tipc_link_reset_list(struct net *net, unsigned int bearer_id);
int tipc_link_xmit_skb(struct net *net, struct sk_buff *skb, u32 dest,
u32 selector);
int tipc_link_xmit(struct net *net, struct sk_buff_head *list, u32 dest,
u32 selector);
int __tipc_link_xmit(struct net *net, struct tipc_link *link,
struct sk_buff_head *list);
void tipc_link_proto_xmit(struct tipc_link *l_ptr, u32 msg_typ, int prob,
u32 gap, u32 tolerance, u32 priority);
void tipc_link_push_packets(struct tipc_link *l_ptr);
u32 tipc_link_defer_pkt(struct sk_buff_head *list, struct sk_buff *buf);
void tipc_link_set_queue_limits(struct tipc_link *l_ptr, u32 window);
void tipc_link_retransmit(struct tipc_link *l_ptr,
struct sk_buff *start, u32 retransmits);
struct sk_buff *tipc_skb_queue_next(const struct sk_buff_head *list,
const struct sk_buff *skb);
int tipc_nl_link_dump(struct sk_buff *skb, struct netlink_callback *cb);
int tipc_nl_link_get(struct sk_buff *skb, struct genl_info *info);
int tipc_nl_link_set(struct sk_buff *skb, struct genl_info *info);
int tipc_nl_link_reset_stats(struct sk_buff *skb, struct genl_info *info);
int tipc_nl_parse_link_prop(struct nlattr *prop, struct nlattr *props[]);
void link_prepare_wakeup(struct tipc_link *l);
/*
* Link sequence number manipulation routines (uses modulo 2**16 arithmetic)
*/
static inline u32 buf_seqno(struct sk_buff *buf)
{
return msg_seqno(buf_msg(buf));
}
static inline u32 mod(u32 x)
{
return x & 0xffffu;
}
static inline int less_eq(u32 left, u32 right)
{
return mod(right - left) < 32768u;
}
static inline int more(u32 left, u32 right)
{
return !less_eq(left, right);
}
static inline int less(u32 left, u32 right)
{
return less_eq(left, right) && (mod(right) != mod(left));
}
static inline u32 lesser(u32 left, u32 right)
{
return less_eq(left, right) ? left : right;
}
static inline u32 link_own_addr(struct tipc_link *l)
{
return msg_prevnode(l->pmsg);
}
/*
* Link status checking routines
*/
static inline int link_working_working(struct tipc_link *l_ptr)
{
return l_ptr->state == WORKING_WORKING;
}
static inline int link_working_unknown(struct tipc_link *l_ptr)
{
return l_ptr->state == WORKING_UNKNOWN;
}
static inline int link_reset_unknown(struct tipc_link *l_ptr)
{
return l_ptr->state == RESET_UNKNOWN;
}
static inline int link_reset_reset(struct tipc_link *l_ptr)
{
return l_ptr->state == RESET_RESET;
}
#endif