![Axel Lin](/assets/img/avatar_default.png)
This patch converts the drivers in drivers/input/* to use the module_spi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
166 lines
3.7 KiB
C
166 lines
3.7 KiB
C
/*
|
|
* AD7879/AD7889 touchscreen (SPI bus)
|
|
*
|
|
* Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/input.h> /* BUS_SPI */
|
|
#include <linux/pm.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "ad7879.h"
|
|
|
|
#define AD7879_DEVID 0x7A /* AD7879/AD7889 */
|
|
|
|
#define MAX_SPI_FREQ_HZ 5000000
|
|
#define AD7879_CMD_MAGIC 0xE000
|
|
#define AD7879_CMD_READ (1 << 10)
|
|
#define AD7879_CMD(reg) (AD7879_CMD_MAGIC | ((reg) & 0xF))
|
|
#define AD7879_WRITECMD(reg) (AD7879_CMD(reg))
|
|
#define AD7879_READCMD(reg) (AD7879_CMD(reg) | AD7879_CMD_READ)
|
|
|
|
/*
|
|
* ad7879_read/write are only used for initial setup and for sysfs controls.
|
|
* The main traffic is done in ad7879_collect().
|
|
*/
|
|
|
|
static int ad7879_spi_xfer(struct spi_device *spi,
|
|
u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf)
|
|
{
|
|
struct spi_message msg;
|
|
struct spi_transfer *xfers;
|
|
void *spi_data;
|
|
u16 *command;
|
|
u16 *_rx_buf = _rx_buf; /* shut gcc up */
|
|
u8 idx;
|
|
int ret;
|
|
|
|
xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL);
|
|
if (!spi_data)
|
|
return -ENOMEM;
|
|
|
|
spi_message_init(&msg);
|
|
|
|
command = spi_data;
|
|
command[0] = cmd;
|
|
if (count == 1) {
|
|
/* ad7879_spi_{read,write} gave us buf on stack */
|
|
command[1] = *tx_buf;
|
|
tx_buf = &command[1];
|
|
_rx_buf = rx_buf;
|
|
rx_buf = &command[2];
|
|
}
|
|
|
|
++xfers;
|
|
xfers[0].tx_buf = command;
|
|
xfers[0].len = 2;
|
|
spi_message_add_tail(&xfers[0], &msg);
|
|
++xfers;
|
|
|
|
for (idx = 0; idx < count; ++idx) {
|
|
if (rx_buf)
|
|
xfers[idx].rx_buf = &rx_buf[idx];
|
|
if (tx_buf)
|
|
xfers[idx].tx_buf = &tx_buf[idx];
|
|
xfers[idx].len = 2;
|
|
spi_message_add_tail(&xfers[idx], &msg);
|
|
}
|
|
|
|
ret = spi_sync(spi, &msg);
|
|
|
|
if (count == 1)
|
|
_rx_buf[0] = command[2];
|
|
|
|
kfree(spi_data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7879_spi_multi_read(struct device *dev,
|
|
u8 first_reg, u8 count, u16 *buf)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
|
|
return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf);
|
|
}
|
|
|
|
static int ad7879_spi_read(struct device *dev, u8 reg)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
u16 ret, dummy;
|
|
|
|
return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret;
|
|
}
|
|
|
|
static int ad7879_spi_write(struct device *dev, u8 reg, u16 val)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
u16 dummy;
|
|
|
|
return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy);
|
|
}
|
|
|
|
static const struct ad7879_bus_ops ad7879_spi_bus_ops = {
|
|
.bustype = BUS_SPI,
|
|
.read = ad7879_spi_read,
|
|
.multi_read = ad7879_spi_multi_read,
|
|
.write = ad7879_spi_write,
|
|
};
|
|
|
|
static int __devinit ad7879_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct ad7879 *ts;
|
|
int err;
|
|
|
|
/* don't exceed max specified SPI CLK frequency */
|
|
if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
|
|
dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spi->bits_per_word = 16;
|
|
err = spi_setup(spi);
|
|
if (err) {
|
|
dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
|
|
return err;
|
|
}
|
|
|
|
ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops);
|
|
if (IS_ERR(ts))
|
|
return PTR_ERR(ts);
|
|
|
|
spi_set_drvdata(spi, ts);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit ad7879_spi_remove(struct spi_device *spi)
|
|
{
|
|
struct ad7879 *ts = spi_get_drvdata(spi);
|
|
|
|
ad7879_remove(ts);
|
|
spi_set_drvdata(spi, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver ad7879_spi_driver = {
|
|
.driver = {
|
|
.name = "ad7879",
|
|
.owner = THIS_MODULE,
|
|
.pm = &ad7879_pm_ops,
|
|
},
|
|
.probe = ad7879_spi_probe,
|
|
.remove = __devexit_p(ad7879_spi_remove),
|
|
};
|
|
|
|
module_spi_driver(ad7879_spi_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
|
|
MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:ad7879");
|