![Axel Lin](/assets/img/avatar_default.png)
This patch converts the drivers in drivers/input/* to use the module_spi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
201 lines
5.1 KiB
C
201 lines
5.1 KiB
C
/*
|
|
* Source for:
|
|
* Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
|
|
* For use with Cypress Txx3xx parts.
|
|
* Supported parts include:
|
|
* CY8CTST341
|
|
* CY8CTMA340
|
|
*
|
|
* Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
|
|
* Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2, and only version 2, as published by the
|
|
* Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
*
|
|
* Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
|
|
*
|
|
*/
|
|
|
|
#include "cyttsp_core.h"
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/input.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define CY_SPI_WR_OP 0x00 /* r/~w */
|
|
#define CY_SPI_RD_OP 0x01
|
|
#define CY_SPI_CMD_BYTES 4
|
|
#define CY_SPI_SYNC_BYTE 2
|
|
#define CY_SPI_SYNC_ACK1 0x62 /* from protocol v.2 */
|
|
#define CY_SPI_SYNC_ACK2 0x9D /* from protocol v.2 */
|
|
#define CY_SPI_DATA_SIZE 128
|
|
#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
|
|
#define CY_SPI_BITS_PER_WORD 8
|
|
|
|
static int cyttsp_spi_xfer(struct cyttsp *ts,
|
|
u8 op, u8 reg, u8 *buf, int length)
|
|
{
|
|
struct spi_device *spi = to_spi_device(ts->dev);
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer[2];
|
|
u8 *wr_buf = &ts->xfer_buf[0];
|
|
u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE];
|
|
int retval;
|
|
int i;
|
|
|
|
if (length > CY_SPI_DATA_SIZE) {
|
|
dev_err(ts->dev, "%s: length %d is too big.\n",
|
|
__func__, length);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
|
|
memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE);
|
|
|
|
wr_buf[0] = 0x00; /* header byte 0 */
|
|
wr_buf[1] = 0xFF; /* header byte 1 */
|
|
wr_buf[2] = reg; /* reg index */
|
|
wr_buf[3] = op; /* r/~w */
|
|
if (op == CY_SPI_WR_OP)
|
|
memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
|
|
|
|
memset(xfer, 0, sizeof(xfer));
|
|
spi_message_init(&msg);
|
|
|
|
/*
|
|
We set both TX and RX buffers because Cypress TTSP
|
|
requires full duplex operation.
|
|
*/
|
|
xfer[0].tx_buf = wr_buf;
|
|
xfer[0].rx_buf = rd_buf;
|
|
switch (op) {
|
|
case CY_SPI_WR_OP:
|
|
xfer[0].len = length + CY_SPI_CMD_BYTES;
|
|
spi_message_add_tail(&xfer[0], &msg);
|
|
break;
|
|
|
|
case CY_SPI_RD_OP:
|
|
xfer[0].len = CY_SPI_CMD_BYTES;
|
|
spi_message_add_tail(&xfer[0], &msg);
|
|
|
|
xfer[1].rx_buf = buf;
|
|
xfer[1].len = length;
|
|
spi_message_add_tail(&xfer[1], &msg);
|
|
break;
|
|
|
|
default:
|
|
dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op);
|
|
return -EINVAL;
|
|
}
|
|
|
|
retval = spi_sync(spi, &msg);
|
|
if (retval < 0) {
|
|
dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
|
|
__func__, retval, xfer[1].len, op);
|
|
|
|
/*
|
|
* do not return here since was a bad ACK sequence
|
|
* let the following ACK check handle any errors and
|
|
* allow silent retries
|
|
*/
|
|
}
|
|
|
|
if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
|
|
rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
|
|
|
|
dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op);
|
|
|
|
for (i = 0; i < CY_SPI_CMD_BYTES; i++)
|
|
dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n",
|
|
__func__, i, rd_buf[i]);
|
|
for (i = 0; i < length; i++)
|
|
dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n",
|
|
__func__, i, buf[i]);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cyttsp_spi_read_block_data(struct cyttsp *ts,
|
|
u8 addr, u8 length, void *data)
|
|
{
|
|
return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length);
|
|
}
|
|
|
|
static int cyttsp_spi_write_block_data(struct cyttsp *ts,
|
|
u8 addr, u8 length, const void *data)
|
|
{
|
|
return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length);
|
|
}
|
|
|
|
static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {
|
|
.bustype = BUS_SPI,
|
|
.write = cyttsp_spi_write_block_data,
|
|
.read = cyttsp_spi_read_block_data,
|
|
};
|
|
|
|
static int __devinit cyttsp_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct cyttsp *ts;
|
|
int error;
|
|
|
|
/* Set up SPI*/
|
|
spi->bits_per_word = CY_SPI_BITS_PER_WORD;
|
|
spi->mode = SPI_MODE_0;
|
|
error = spi_setup(spi);
|
|
if (error < 0) {
|
|
dev_err(&spi->dev, "%s: SPI setup error %d\n",
|
|
__func__, error);
|
|
return error;
|
|
}
|
|
|
|
ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
|
|
CY_SPI_DATA_BUF_SIZE * 2);
|
|
if (IS_ERR(ts))
|
|
return PTR_ERR(ts);
|
|
|
|
spi_set_drvdata(spi, ts);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit cyttsp_spi_remove(struct spi_device *spi)
|
|
{
|
|
struct cyttsp *ts = spi_get_drvdata(spi);
|
|
|
|
cyttsp_remove(ts);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver cyttsp_spi_driver = {
|
|
.driver = {
|
|
.name = CY_SPI_NAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &cyttsp_pm_ops,
|
|
},
|
|
.probe = cyttsp_spi_probe,
|
|
.remove = __devexit_p(cyttsp_spi_remove),
|
|
};
|
|
|
|
module_spi_driver(cyttsp_spi_driver);
|
|
|
|
MODULE_ALIAS("spi:cyttsp");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
|
|
MODULE_AUTHOR("Cypress");
|
|
MODULE_ALIAS("spi:cyttsp");
|