remarkable-linux/drivers/ata/pata_rb532_cf.c
Alban Bedel 832f5dacfa MIPS: Remove all the uses of custom gpio.h
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS
machines, and each machine type provides its own gpio.h. However
only a handful really implement the GPIO API, most just forward
everythings to gpiolib.

The Alchemy machine is notable as it provides a system to allow
implementing the GPIO API at the board level. But it is not used by
any board currently supported, so it can also be removed.

For most machine types we can just remove the custom gpio.h, as well
as the custom wrappers if some exists. Some of the code found in
the wrappers must be moved to the respective GPIO driver.

A few more fixes are need in some drivers as they rely on linux/gpio.h
to provides some machine specific definitions, or used asm/gpio.h
instead of linux/gpio.h for the gpio API.

Signed-off-by: Alban Bedel <albeu@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Daniel Walter <dwalter@google.com>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Varka Bhadram <varkabhadram@gmail.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Michael Buesch <m@bues.ch>
Cc: abdoulaye berthe <berthe.ab@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: netdev@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10828/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03 12:08:02 +02:00

208 lines
5 KiB
C

/*
* A low-level PATA driver to handle a Compact Flash connected on the
* Mikrotik's RouterBoard 532 board.
*
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
* Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
*
* This file was based on: drivers/ata/pata_ixp4xx_cf.c
* Copyright (C) 2006-07 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* Also was based on the driver for Linux 2.4.xx published by Mikrotik for
* their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
* seems not to have a license.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/libata.h>
#include <scsi/scsi_host.h>
#define DRV_NAME "pata-rb532-cf"
#define DRV_VERSION "0.1.0"
#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash"
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
#define RB500_CF_REG_BASE 0x0800
#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
/* 32bit buffered data register offset */
#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
unsigned int gpio_line;
unsigned int irq;
};
/* ------------------------------------------------------------------------ */
static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
{
struct ata_host *ah = dev_instance;
struct rb532_cf_info *info = ah->private_data;
if (gpio_get_value(info->gpio_line)) {
irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
ata_sff_interrupt(info->irq, dev_instance);
} else {
irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
return IRQ_HANDLED;
}
static struct ata_port_operations rb532_pata_port_ops = {
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
};
/* ------------------------------------------------------------------------ */
static struct scsi_host_template rb532_pata_sht = {
ATA_PIO_SHT(DRV_NAME),
};
/* ------------------------------------------------------------------------ */
static void rb532_pata_setup_ports(struct ata_host *ah)
{
struct rb532_cf_info *info = ah->private_data;
struct ata_port *ap;
ap = ah->ports[0];
ap->ops = &rb532_pata_port_ops;
ap->pio_mask = ATA_PIO4;
ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static int rb532_pata_driver_probe(struct platform_device *pdev)
{
int irq;
int gpio;
struct resource *res;
struct ata_host *ah;
struct rb532_cf_info *info;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no IOMEM resource found\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev, "no IRQ resource found\n");
return -ENOENT;
}
gpio = irq_to_gpio(irq);
if (gpio < 0) {
dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
return -ENOENT;
}
ret = gpio_request(gpio, DRV_NAME);
if (ret) {
dev_err(&pdev->dev, "GPIO request failed\n");
return ret;
}
/* allocate host */
ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS);
if (!ah)
return -ENOMEM;
platform_set_drvdata(pdev, ah);
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
ah->private_data = info;
info->gpio_line = gpio;
info->irq = irq;
info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
resource_size(res));
if (!info->iobase)
return -ENOMEM;
ret = gpio_direction_input(gpio);
if (ret) {
dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
ret);
goto err_free_gpio;
}
rb532_pata_setup_ports(ah);
ret = ata_host_activate(ah, irq, rb532_pata_irq_handler,
IRQF_TRIGGER_LOW, &rb532_pata_sht);
if (ret)
goto err_free_gpio;
return 0;
err_free_gpio:
gpio_free(gpio);
return ret;
}
static int rb532_pata_driver_remove(struct platform_device *pdev)
{
struct ata_host *ah = platform_get_drvdata(pdev);
struct rb532_cf_info *info = ah->private_data;
ata_host_detach(ah);
gpio_free(info->gpio_line);
return 0;
}
static struct platform_driver rb532_pata_platform_driver = {
.probe = rb532_pata_driver_probe,
.remove = rb532_pata_driver_remove,
.driver = {
.name = DRV_NAME,
},
};
#define DRV_INFO DRV_DESC " version " DRV_VERSION
module_platform_driver(rb532_pata_platform_driver);
MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_DESCRIPTION(DRV_DESC);
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);