redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity
remarkable-linux/drivers/video/atafb.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

3272 lines
89 KiB
C
Raw Blame History

/*
* linux/drivers/video/atafb.c -- Atari builtin chipset frame buffer device
*
* Copyright (C) 1994 Martin Schaller & Roman Hodek
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*
* History:
* - 03 Jan 95: Original version by Martin Schaller: The TT driver and
* all the device independent stuff
* - 09 Jan 95: Roman: I've added the hardware abstraction (hw_switch)
* and wrote the Falcon, ST(E), and External drivers
* based on the original TT driver.
* - 07 May 95: Martin: Added colormap operations for the external driver
* - 21 May 95: Martin: Added support for overscan
* Andreas: some bug fixes for this
* - Jul 95: Guenther Kelleter <guenther@pool.informatik.rwth-aachen.de>:
* Programmable Falcon video modes
* (thanks to Christian Cartus for documentation
* of VIDEL registers).
* - 27 Dec 95: Guenther: Implemented user definable video modes "user[0-7]"
* on minor 24...31. "user0" may be set on commandline by
* "R<x>;<y>;<depth>". (Makes sense only on Falcon)
* Video mode switch on Falcon now done at next VBL interrupt
* to avoid the annoying right shift of the screen.
* - 23 Sep 97: Juergen: added xres_virtual for cards like ProMST
* The external-part is legacy, therefore hardware-specific
* functions like panning/hardwarescrolling/blanking isn't
* supported.
* - 29 Sep 97: Juergen: added Romans suggestion for pan_display
* (var->xoffset was changed even if no set_screen_base avail.)
* - 05 Oct 97: Juergen: extfb (PACKED_PIXEL) is FB_PSEUDOCOLOR 'cause
* we know how to set the colors
* ext_*palette: read from ext_colors (former MV300_colors)
* write to ext_colors and RAMDAC
*
* To do:
* - For the Falcon it is not possible to set random video modes on
* SM124 and SC/TV, only the bootup resolution is supported.
*
*/
#define ATAFB_TT
#define ATAFB_STE
#define ATAFB_EXT
#define ATAFB_FALCON
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/setup.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/atari_stram.h>
#include <linux/fb.h>
#include <asm/atarikb.h>
#include "c2p.h"
#include "atafb.h"
#define SWITCH_ACIA 0x01 /* modes for switch on OverScan */
#define SWITCH_SND6 0x40
#define SWITCH_SND7 0x80
#define SWITCH_NONE 0x00
#define up(x, r) (((x) + (r) - 1) & ~((r)-1))
/*
* Interface to the world
*/
static int atafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
static int atafb_set_par(struct fb_info *info);
static int atafb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
unsigned int blue, unsigned int transp,
struct fb_info *info);
static int atafb_blank(int blank, struct fb_info *info);
static int atafb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info);
static void atafb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect);
static void atafb_copyarea(struct fb_info *info,
const struct fb_copyarea *region);
static void atafb_imageblit(struct fb_info *info, const struct fb_image *image);
static int atafb_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg);
static int default_par; /* default resolution (0=none) */
static unsigned long default_mem_req;
static int hwscroll = -1;
static int use_hwscroll = 1;
static int sttt_xres = 640, st_yres = 400, tt_yres = 480;
static int sttt_xres_virtual = 640, sttt_yres_virtual = 400;
static int ovsc_offset, ovsc_addlen;
/*
* Hardware parameters for current mode
*/
static struct atafb_par {
void *screen_base;
int yres_virtual;
u_long next_line;
#if defined ATAFB_TT || defined ATAFB_STE
union {
struct {
int mode;
int sync;
} tt, st;
#endif
#ifdef ATAFB_FALCON
struct falcon_hw {
/* Here are fields for storing a video mode, as direct
* parameters for the hardware.
*/
short sync;
short line_width;
short line_offset;
short st_shift;
short f_shift;
short vid_control;
short vid_mode;
short xoffset;
short hht, hbb, hbe, hdb, hde, hss;
short vft, vbb, vbe, vdb, vde, vss;
/* auxiliary information */
short mono;
short ste_mode;
short bpp;
u32 pseudo_palette[16];
} falcon;
#endif
/* Nothing needed for external mode */
} hw;
} current_par;
/* Don't calculate an own resolution, and thus don't change the one found when
* booting (currently used for the Falcon to keep settings for internal video
* hardware extensions (e.g. ScreenBlaster) */
static int DontCalcRes = 0;
#ifdef ATAFB_FALCON
#define HHT hw.falcon.hht
#define HBB hw.falcon.hbb
#define HBE hw.falcon.hbe
#define HDB hw.falcon.hdb
#define HDE hw.falcon.hde
#define HSS hw.falcon.hss
#define VFT hw.falcon.vft
#define VBB hw.falcon.vbb
#define VBE hw.falcon.vbe
#define VDB hw.falcon.vdb
#define VDE hw.falcon.vde
#define VSS hw.falcon.vss
#define VCO_CLOCK25 0x04
#define VCO_CSYPOS 0x10
#define VCO_VSYPOS 0x20
#define VCO_HSYPOS 0x40
#define VCO_SHORTOFFS 0x100
#define VMO_DOUBLE 0x01
#define VMO_INTER 0x02
#define VMO_PREMASK 0x0c
#endif
static struct fb_info fb_info = {
.fix = {
.id = "Atari ",
.visual = FB_VISUAL_PSEUDOCOLOR,
.accel = FB_ACCEL_NONE,
}
};
static void *screen_base; /* base address of screen */
static void *real_screen_base; /* (only for Overscan) */
static int screen_len;
static int current_par_valid;
static int mono_moni;
#ifdef ATAFB_EXT
/* external video handling */
static unsigned int external_xres;
static unsigned int external_xres_virtual;
static unsigned int external_yres;
/*
* not needed - atafb will never support panning/hardwarescroll with external
* static unsigned int external_yres_virtual;
*/
static unsigned int external_depth;
static int external_pmode;
static void *external_addr;
static unsigned long external_len;
static unsigned long external_vgaiobase;
static unsigned int external_bitspercol = 6;
/*
* JOE <joe@amber.dinoco.de>:
* added card type for external driver, is only needed for
* colormap handling.
*/
enum cardtype { IS_VGA, IS_MV300 };
static enum cardtype external_card_type = IS_VGA;
/*
* The MV300 mixes the color registers. So we need an array of munged
* indices in order to access the correct reg.
*/
static int MV300_reg_1bit[2] = {
0, 1
};
static int MV300_reg_4bit[16] = {
0, 8, 4, 12, 2, 10, 6, 14, 1, 9, 5, 13, 3, 11, 7, 15
};
static int MV300_reg_8bit[256] = {
0, 128, 64, 192, 32, 160, 96, 224, 16, 144, 80, 208, 48, 176, 112, 240,
8, 136, 72, 200, 40, 168, 104, 232, 24, 152, 88, 216, 56, 184, 120, 248,
4, 132, 68, 196, 36, 164, 100, 228, 20, 148, 84, 212, 52, 180, 116, 244,
12, 140, 76, 204, 44, 172, 108, 236, 28, 156, 92, 220, 60, 188, 124, 252,
2, 130, 66, 194, 34, 162, 98, 226, 18, 146, 82, 210, 50, 178, 114, 242,
10, 138, 74, 202, 42, 170, 106, 234, 26, 154, 90, 218, 58, 186, 122, 250,
6, 134, 70, 198, 38, 166, 102, 230, 22, 150, 86, 214, 54, 182, 118, 246,
14, 142, 78, 206, 46, 174, 110, 238, 30, 158, 94, 222, 62, 190, 126, 254,
1, 129, 65, 193, 33, 161, 97, 225, 17, 145, 81, 209, 49, 177, 113, 241,
9, 137, 73, 201, 41, 169, 105, 233, 25, 153, 89, 217, 57, 185, 121, 249,
5, 133, 69, 197, 37, 165, 101, 229, 21, 149, 85, 213, 53, 181, 117, 245,
13, 141, 77, 205, 45, 173, 109, 237, 29, 157, 93, 221, 61, 189, 125, 253,
3, 131, 67, 195, 35, 163, 99, 227, 19, 147, 83, 211, 51, 179, 115, 243,
11, 139, 75, 203, 43, 171, 107, 235, 27, 155, 91, 219, 59, 187, 123, 251,
7, 135, 71, 199, 39, 167, 103, 231, 23, 151, 87, 215, 55, 183, 119, 247,
15, 143, 79, 207, 47, 175, 111, 239, 31, 159, 95, 223, 63, 191, 127, 255
};
static int *MV300_reg = MV300_reg_8bit;
#endif /* ATAFB_EXT */
static int inverse;
extern int fontheight_8x8;
extern int fontwidth_8x8;
extern unsigned char fontdata_8x8[];
extern int fontheight_8x16;
extern int fontwidth_8x16;
extern unsigned char fontdata_8x16[];
/*
* struct fb_ops {
* * open/release and usage marking
* struct module *owner;
* int (*fb_open)(struct fb_info *info, int user);
* int (*fb_release)(struct fb_info *info, int user);
*
* * For framebuffers with strange non linear layouts or that do not
* * work with normal memory mapped access
* ssize_t (*fb_read)(struct file *file, char __user *buf, size_t count, loff_t *ppos);
* ssize_t (*fb_write)(struct file *file, const char __user *buf, size_t count, loff_t *ppos);
*
* * checks var and eventually tweaks it to something supported,
* * DOES NOT MODIFY PAR *
* int (*fb_check_var)(struct fb_var_screeninfo *var, struct fb_info *info);
*
* * set the video mode according to info->var *
* int (*fb_set_par)(struct fb_info *info);
*
* * set color register *
* int (*fb_setcolreg)(unsigned int regno, unsigned int red, unsigned int green,
* unsigned int blue, unsigned int transp, struct fb_info *info);
*
* * set color registers in batch *
* int (*fb_setcmap)(struct fb_cmap *cmap, struct fb_info *info);
*
* * blank display *
* int (*fb_blank)(int blank, struct fb_info *info);
*
* * pan display *
* int (*fb_pan_display)(struct fb_var_screeninfo *var, struct fb_info *info);
*
* *** The meat of the drawing engine ***
* * Draws a rectangle *
* void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect);
* * Copy data from area to another *
* void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region);
* * Draws a image to the display *
* void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image);
*
* * Draws cursor *
* int (*fb_cursor) (struct fb_info *info, struct fb_cursor *cursor);
*
* * Rotates the display *
* void (*fb_rotate)(struct fb_info *info, int angle);
*
* * wait for blit idle, optional *
* int (*fb_sync)(struct fb_info *info);
*
* * perform fb specific ioctl (optional) *
* int (*fb_ioctl)(struct fb_info *info, unsigned int cmd,
* unsigned long arg);
*
* * Handle 32bit compat ioctl (optional) *
* int (*fb_compat_ioctl)(struct fb_info *info, unsigned int cmd,
* unsigned long arg);
*
* * perform fb specific mmap *
* int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma);
* } ;
*/
/* ++roman: This structure abstracts from the underlying hardware (ST(e),
* TT, or Falcon.
*
* int (*detect)(void)
* This function should detect the current video mode settings and
* store them in atafb_predefined[0] for later reference by the
* user. Return the index+1 of an equivalent predefined mode or 0
* if there is no such.
*
* int (*encode_fix)(struct fb_fix_screeninfo *fix,
* struct atafb_par *par)
* This function should fill in the 'fix' structure based on the
* values in the 'par' structure.
* !!! Obsolete, perhaps !!!
*
* int (*decode_var)(struct fb_var_screeninfo *var,
* struct atafb_par *par)
* Get the video params out of 'var'. If a value doesn't fit, round
* it up, if it's too big, return EINVAL.
* Round up in the following order: bits_per_pixel, xres, yres,
* xres_virtual, yres_virtual, xoffset, yoffset, grayscale, bitfields,
* horizontal timing, vertical timing.
*
* int (*encode_var)(struct fb_var_screeninfo *var,
* struct atafb_par *par);
* Fill the 'var' structure based on the values in 'par' and maybe
* other values read out of the hardware.
*
* void (*get_par)(struct atafb_par *par)
* Fill the hardware's 'par' structure.
* !!! Used only by detect() !!!
*
* void (*set_par)(struct atafb_par *par)
* Set the hardware according to 'par'.
*
* void (*set_screen_base)(void *s_base)
* Set the base address of the displayed frame buffer. Only called
* if yres_virtual > yres or xres_virtual > xres.
*
* int (*blank)(int blank_mode)
* Blank the screen if blank_mode != 0, else unblank. If blank == NULL then
* the caller blanks by setting the CLUT to all black. Return 0 if blanking
* succeeded, !=0 if un-/blanking failed due to e.g. a video mode which
* doesn't support it. Implements VESA suspend and powerdown modes on
* hardware that supports disabling hsync/vsync:
* blank_mode == 2: suspend vsync, 3:suspend hsync, 4: powerdown.
*/
static struct fb_hwswitch {
int (*detect)(void);
int (*encode_fix)(struct fb_fix_screeninfo *fix,
struct atafb_par *par);
int (*decode_var)(struct fb_var_screeninfo *var,
struct atafb_par *par);
int (*encode_var)(struct fb_var_screeninfo *var,
struct atafb_par *par);
void (*get_par)(struct atafb_par *par);
void (*set_par)(struct atafb_par *par);
void (*set_screen_base)(void *s_base);
int (*blank)(int blank_mode);
int (*pan_display)(struct fb_var_screeninfo *var,
struct fb_info *info);
} *fbhw;
static char *autodetect_names[] = { "autodetect", NULL };
static char *stlow_names[] = { "stlow", NULL };
static char *stmid_names[] = { "stmid", "default5", NULL };
static char *sthigh_names[] = { "sthigh", "default4", NULL };
static char *ttlow_names[] = { "ttlow", NULL };
static char *ttmid_names[] = { "ttmid", "default1", NULL };
static char *tthigh_names[] = { "tthigh", "default2", NULL };
static char *vga2_names[] = { "vga2", NULL };
static char *vga4_names[] = { "vga4", NULL };
static char *vga16_names[] = { "vga16", "default3", NULL };
static char *vga256_names[] = { "vga256", NULL };
static char *falh2_names[] = { "falh2", NULL };
static char *falh16_names[] = { "falh16", NULL };
static char **fb_var_names[] = {
autodetect_names,
stlow_names,
stmid_names,
sthigh_names,
ttlow_names,
ttmid_names,
tthigh_names,
vga2_names,
vga4_names,
vga16_names,
vga256_names,
falh2_names,
falh16_names,
NULL
};
static struct fb_var_screeninfo atafb_predefined[] = {
/*
* yres_virtual == 0 means use hw-scrolling if possible, else yres
*/
{ /* autodetect */
0, 0, 0, 0, 0, 0, 0, 0, /* xres-grayscale */
{0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, /* red green blue tran*/
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* st low */
320, 200, 320, 0, 0, 0, 4, 0,
{0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* st mid */
640, 200, 640, 0, 0, 0, 2, 0,
{0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* st high */
640, 400, 640, 0, 0, 0, 1, 0,
{0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* tt low */
320, 480, 320, 0, 0, 0, 8, 0,
{0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* tt mid */
640, 480, 640, 0, 0, 0, 4, 0,
{0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* tt high */
1280, 960, 1280, 0, 0, 0, 1, 0,
{0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* vga2 */
640, 480, 640, 0, 0, 0, 1, 0,
{0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* vga4 */
640, 480, 640, 0, 0, 0, 2, 0,
{0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* vga16 */
640, 480, 640, 0, 0, 0, 4, 0,
{0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* vga256 */
640, 480, 640, 0, 0, 0, 8, 0,
{0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* falh2 */
896, 608, 896, 0, 0, 0, 1, 0,
{0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
{ /* falh16 */
896, 608, 896, 0, 0, 0, 4, 0,
{0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0},
0, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0, 0 },
};
static int num_atafb_predefined = ARRAY_SIZE(atafb_predefined);
static struct fb_videomode atafb_modedb[] __initdata = {
/*
* Atari Video Modes
*
* If you change these, make sure to update DEFMODE_* as well!
*/
/*
* ST/TT Video Modes
*/
{
/* 320x200, 15 kHz, 60 Hz (ST low) */
"st-low", 60, 320, 200, 32000, 32, 16, 31, 14, 96, 4,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
}, {
/* 640x200, 15 kHz, 60 Hz (ST medium) */
"st-mid", 60, 640, 200, 32000, 32, 16, 31, 14, 96, 4,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
}, {
/* 640x400, 30.25 kHz, 63.5 Hz (ST high) */
"st-high", 63, 640, 400, 32000, 128, 0, 40, 14, 128, 4,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
}, {
/* 320x480, 15 kHz, 60 Hz (TT low) */
"tt-low", 60, 320, 480, 31041, 120, 100, 8, 16, 140, 30,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
}, {
/* 640x480, 29 kHz, 57 Hz (TT medium) */
"tt-mid", 60, 640, 480, 31041, 120, 100, 8, 16, 140, 30,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
}, {
/* 1280x960, 29 kHz, 60 Hz (TT high) */
"tt-high", 57, 640, 960, 31041, 120, 100, 8, 16, 140, 30,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
},
/*
* VGA Video Modes
*/
{
/* 640x480, 31 kHz, 60 Hz (VGA) */
"vga", 63.5, 640, 480, 32000, 18, 42, 31, 11, 96, 3,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
}, {
/* 640x400, 31 kHz, 70 Hz (VGA) */
"vga70", 70, 640, 400, 32000, 18, 42, 31, 11, 96, 3,
FB_SYNC_VERT_HIGH_ACT | FB_SYNC_COMP_HIGH_ACT, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
},
/*
* Falcon HiRes Video Modes
*/
{
/* 896x608, 31 kHz, 60 Hz (Falcon High) */
"falh", 60, 896, 608, 32000, 18, 42, 31, 1, 96,3,
0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP
},
};
#define NUM_TOTAL_MODES ARRAY_SIZE(atafb_modedb)
static char *mode_option __initdata = NULL;
/* default modes */
#define DEFMODE_TT 5 /* "tt-high" for TT */
#define DEFMODE_F30 7 /* "vga70" for Falcon */
#define DEFMODE_STE 2 /* "st-high" for ST/E */
#define DEFMODE_EXT 6 /* "vga" for external */
static int get_video_mode(char *vname)
{
char ***name_list;
char **name;
int i;
name_list = fb_var_names;
for (i = 0; i < num_atafb_predefined; i++) {
name = *name_list++;
if (!name || !*name)
break;
while (*name) {
if (!strcmp(vname, *name))
return i + 1;
name++;
}
}
return 0;
}
/* ------------------- TT specific functions ---------------------- */
#ifdef ATAFB_TT
static int tt_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
{
int mode;
strcpy(fix->id, "Atari Builtin");
fix->smem_start = (unsigned long)real_screen_base;
fix->smem_len = screen_len;
fix->type = FB_TYPE_INTERLEAVED_PLANES;
fix->type_aux = 2;
fix->visual = FB_VISUAL_PSEUDOCOLOR;
mode = par->hw.tt.mode & TT_SHIFTER_MODEMASK;
if (mode == TT_SHIFTER_TTHIGH || mode == TT_SHIFTER_STHIGH) {
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
if (mode == TT_SHIFTER_TTHIGH)
fix->visual = FB_VISUAL_MONO01;
}
fix->xpanstep = 0;
fix->ypanstep = 1;
fix->ywrapstep = 0;
fix->line_length = par->next_line;
fix->accel = FB_ACCEL_ATARIBLITT;
return 0;
}
static int tt_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
{
int xres = var->xres;
int yres = var->yres;
int bpp = var->bits_per_pixel;
int linelen;
int yres_virtual = var->yres_virtual;
if (mono_moni) {
if (bpp > 1 || xres > sttt_xres * 2 || yres > tt_yres * 2)
return -EINVAL;
par->hw.tt.mode = TT_SHIFTER_TTHIGH;
xres = sttt_xres * 2;
yres = tt_yres * 2;
bpp = 1;
} else {
if (bpp > 8 || xres > sttt_xres || yres > tt_yres)
return -EINVAL;
if (bpp > 4) {
if (xres > sttt_xres / 2 || yres > tt_yres)
return -EINVAL;
par->hw.tt.mode = TT_SHIFTER_TTLOW;
xres = sttt_xres / 2;
yres = tt_yres;
bpp = 8;
} else if (bpp > 2) {
if (xres > sttt_xres || yres > tt_yres)
return -EINVAL;
if (xres > sttt_xres / 2 || yres > st_yres / 2) {
par->hw.tt.mode = TT_SHIFTER_TTMID;
xres = sttt_xres;
yres = tt_yres;
bpp = 4;
} else {
par->hw.tt.mode = TT_SHIFTER_STLOW;
xres = sttt_xres / 2;
yres = st_yres / 2;
bpp = 4;
}
} else if (bpp > 1) {
if (xres > sttt_xres || yres > st_yres / 2)
return -EINVAL;
par->hw.tt.mode = TT_SHIFTER_STMID;
xres = sttt_xres;
yres = st_yres / 2;
bpp = 2;
} else if (var->xres > sttt_xres || var->yres > st_yres) {
return -EINVAL;
} else {
par->hw.tt.mode = TT_SHIFTER_STHIGH;
xres = sttt_xres;
yres = st_yres;
bpp = 1;
}
}
if (yres_virtual <= 0)
yres_virtual = 0;
else if (yres_virtual < yres)
yres_virtual = yres;
if (var->sync & FB_SYNC_EXT)
par->hw.tt.sync = 0;
else
par->hw.tt.sync = 1;
linelen = xres * bpp / 8;
if (yres_virtual * linelen > screen_len && screen_len)
return -EINVAL;
if (yres * linelen > screen_len && screen_len)
return -EINVAL;
if (var->yoffset + yres > yres_virtual && yres_virtual)
return -EINVAL;
par->yres_virtual = yres_virtual;
par->screen_base = screen_base + var->yoffset * linelen;
par->next_line = linelen;
return 0;
}
static int tt_encode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
{
int linelen;
memset(var, 0, sizeof(struct fb_var_screeninfo));
var->red.offset = 0;
var->red.length = 4;
var->red.msb_right = 0;
var->grayscale = 0;
var->pixclock = 31041;
var->left_margin = 120; /* these may be incorrect */
var->right_margin = 100;
var->upper_margin = 8;
var->lower_margin = 16;
var->hsync_len = 140;
var->vsync_len = 30;
var->height = -1;
var->width = -1;
if (par->hw.tt.sync & 1)
var->sync = 0;
else
var->sync = FB_SYNC_EXT;
switch (par->hw.tt.mode & TT_SHIFTER_MODEMASK) {
case TT_SHIFTER_STLOW:
var->xres = sttt_xres / 2;
var->xres_virtual = sttt_xres_virtual / 2;
var->yres = st_yres / 2;
var->bits_per_pixel = 4;
break;
case TT_SHIFTER_STMID:
var->xres = sttt_xres;
var->xres_virtual = sttt_xres_virtual;
var->yres = st_yres / 2;
var->bits_per_pixel = 2;
break;
case TT_SHIFTER_STHIGH:
var->xres = sttt_xres;
var->xres_virtual = sttt_xres_virtual;
var->yres = st_yres;
var->bits_per_pixel = 1;
break;
case TT_SHIFTER_TTLOW:
var->xres = sttt_xres / 2;
var->xres_virtual = sttt_xres_virtual / 2;
var->yres = tt_yres;
var->bits_per_pixel = 8;
break;
case TT_SHIFTER_TTMID:
var->xres = sttt_xres;
var->xres_virtual = sttt_xres_virtual;
var->yres = tt_yres;
var->bits_per_pixel = 4;
break;
case TT_SHIFTER_TTHIGH:
var->red.length = 0;
var->xres = sttt_xres * 2;
var->xres_virtual = sttt_xres_virtual * 2;
var->yres = tt_yres * 2;
var->bits_per_pixel = 1;
break;
}
var->blue = var->green = var->red;
var->transp.offset = 0;
var->transp.length = 0;
var->transp.msb_right = 0;
linelen = var->xres_virtual * var->bits_per_pixel / 8;
if (!use_hwscroll)
var->yres_virtual = var->yres;
else if (screen_len) {
if (par->yres_virtual)
var->yres_virtual = par->yres_virtual;
else
/* yres_virtual == 0 means use maximum */
var->yres_virtual = screen_len / linelen;
} else {
if (hwscroll < 0)
var->yres_virtual = 2 * var->yres;
else
var->yres_virtual = var->yres + hwscroll * 16;
}
var->xoffset = 0;
if (screen_base)
var->yoffset = (par->screen_base - screen_base) / linelen;
else
var->yoffset = 0;
var->nonstd = 0;
var->activate = 0;
var->vmode = FB_VMODE_NONINTERLACED;
return 0;
}
static void tt_get_par(struct atafb_par *par)
{
unsigned long addr;
par->hw.tt.mode = shifter_tt.tt_shiftmode;
par->hw.tt.sync = shifter.syncmode;
addr = ((shifter.bas_hi & 0xff) << 16) |
((shifter.bas_md & 0xff) << 8) |
((shifter.bas_lo & 0xff));
par->screen_base = phys_to_virt(addr);
}
static void tt_set_par(struct atafb_par *par)
{
shifter_tt.tt_shiftmode = par->hw.tt.mode;
shifter.syncmode = par->hw.tt.sync;
/* only set screen_base if really necessary */
if (current_par.screen_base != par->screen_base)
fbhw->set_screen_base(par->screen_base);
}
static int tt_setcolreg(unsigned int regno, unsigned int red,
unsigned int green, unsigned int blue,
unsigned int transp, struct fb_info *info)
{
if ((shifter_tt.tt_shiftmode & TT_SHIFTER_MODEMASK) == TT_SHIFTER_STHIGH)
regno += 254;
if (regno > 255)
return 1;
tt_palette[regno] = (((red >> 12) << 8) | ((green >> 12) << 4) |
(blue >> 12));
if ((shifter_tt.tt_shiftmode & TT_SHIFTER_MODEMASK) ==
TT_SHIFTER_STHIGH && regno == 254)
tt_palette[0] = 0;
return 0;
}
static int tt_detect(void)
{
struct atafb_par par;
/* Determine the connected monitor: The DMA sound must be
* disabled before reading the MFP GPIP, because the Sound
* Done Signal and the Monochrome Detect are XORed together!
*
* Even on a TT, we should look if there is a DMA sound. It was
* announced that the Eagle is TT compatible, but only the PCM is
* missing...
*/
if (ATARIHW_PRESENT(PCM_8BIT)) {
tt_dmasnd.ctrl = DMASND_CTRL_OFF;
udelay(20); /* wait a while for things to settle down */
}
mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
tt_get_par(&par);
tt_encode_var(&atafb_predefined[0], &par);
return 1;
}
#endif /* ATAFB_TT */
/* ------------------- Falcon specific functions ---------------------- */
#ifdef ATAFB_FALCON
static int mon_type; /* Falcon connected monitor */
static int f030_bus_width; /* Falcon ram bus width (for vid_control) */
#define F_MON_SM 0
#define F_MON_SC 1
#define F_MON_VGA 2
#define F_MON_TV 3
static struct pixel_clock {
unsigned long f; /* f/[Hz] */
unsigned long t; /* t/[ps] (=1/f) */
int right, hsync, left; /* standard timing in clock cycles, not pixel */
/* hsync initialized in falcon_detect() */
int sync_mask; /* or-mask for hw.falcon.sync to set this clock */
int control_mask; /* ditto, for hw.falcon.vid_control */
} f25 = {
25175000, 39721, 18, 0, 42, 0x0, VCO_CLOCK25
}, f32 = {
32000000, 31250, 18, 0, 42, 0x0, 0
}, fext = {
0, 0, 18, 0, 42, 0x1, 0
};
/* VIDEL-prescale values [mon_type][pixel_length from VCO] */
static int vdl_prescale[4][3] = {
{ 4,2,1 }, { 4,2,1 }, { 4,2,2 }, { 4,2,1 }
};
/* Default hsync timing [mon_type] in picoseconds */
static long h_syncs[4] = { 3000000, 4875000, 4000000, 4875000 };
static inline int hxx_prescale(struct falcon_hw *hw)
{
return hw->ste_mode ? 16
: vdl_prescale[mon_type][hw->vid_mode >> 2 & 0x3];
}
static int falcon_encode_fix(struct fb_fix_screeninfo *fix,
struct atafb_par *par)
{
strcpy(fix->id, "Atari Builtin");
fix->smem_start = (unsigned long)real_screen_base;
fix->smem_len = screen_len;
fix->type = FB_TYPE_INTERLEAVED_PLANES;
fix->type_aux = 2;
fix->visual = FB_VISUAL_PSEUDOCOLOR;
fix->xpanstep = 1;
fix->ypanstep = 1;
fix->ywrapstep = 0;
if (par->hw.falcon.mono) {
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
/* no smooth scrolling with longword aligned video mem */
fix->xpanstep = 32;
} else if (par->hw.falcon.f_shift & 0x100) {
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
/* Is this ok or should it be DIRECTCOLOR? */
fix->visual = FB_VISUAL_TRUECOLOR;
fix->xpanstep = 2;
}
fix->line_length = par->next_line;
fix->accel = FB_ACCEL_ATARIBLITT;
return 0;
}
static int falcon_decode_var(struct fb_var_screeninfo *var,
struct atafb_par *par)
{
int bpp = var->bits_per_pixel;
int xres = var->xres;
int yres = var->yres;
int xres_virtual = var->xres_virtual;
int yres_virtual = var->yres_virtual;
int left_margin, right_margin, hsync_len;
int upper_margin, lower_margin, vsync_len;
int linelen;
int interlace = 0, doubleline = 0;
struct pixel_clock *pclock;
int plen; /* width of pixel in clock cycles */
int xstretch;
int prescale;
int longoffset = 0;
int hfreq, vfreq;
int hdb_off, hde_off, base_off;
int gstart, gend1, gend2, align;
/*
Get the video params out of 'var'. If a value doesn't fit, round
it up, if it's too big, return EINVAL.
Round up in the following order: bits_per_pixel, xres, yres,
xres_virtual, yres_virtual, xoffset, yoffset, grayscale, bitfields,
horizontal timing, vertical timing.
There is a maximum of screen resolution determined by pixelclock
and minimum frame rate -- (X+hmarg.)*(Y+vmarg.)*vfmin <= pixelclock.
In interlace mode this is " * " *vfmin <= pixelclock.
Additional constraints: hfreq.
Frequency range for multisync monitors is given via command line.
For TV and SM124 both frequencies are fixed.
X % 16 == 0 to fit 8x?? font (except 1 bitplane modes must use X%32 == 0)
Y % 16 == 0 to fit 8x16 font
Y % 8 == 0 if Y<400
Currently interlace and doubleline mode in var are ignored.
On SM124 and TV only the standard resolutions can be used.
*/
/* Reject uninitialized mode */
if (!xres || !yres || !bpp)
return -EINVAL;
if (mon_type == F_MON_SM && bpp != 1)
return -EINVAL;
if (bpp <= 1) {
bpp = 1;
par->hw.falcon.f_shift = 0x400;
par->hw.falcon.st_shift = 0x200;
} else if (bpp <= 2) {
bpp = 2;
par->hw.falcon.f_shift = 0x000;
par->hw.falcon.st_shift = 0x100;
} else if (bpp <= 4) {
bpp = 4;
par->hw.falcon.f_shift = 0x000;
par->hw.falcon.st_shift = 0x000;
} else if (bpp <= 8) {
bpp = 8;
par->hw.falcon.f_shift = 0x010;
} else if (bpp <= 16) {
bpp = 16; /* packed pixel mode */
par->hw.falcon.f_shift = 0x100; /* hicolor, no overlay */
} else
return -EINVAL;
par->hw.falcon.bpp = bpp;
if (mon_type == F_MON_SM || DontCalcRes) {
/* Skip all calculations. VGA/TV/SC1224 only supported. */
struct fb_var_screeninfo *myvar = &atafb_predefined[0];
if (bpp > myvar->bits_per_pixel ||
var->xres > myvar->xres ||
var->yres > myvar->yres)
return -EINVAL;
fbhw->get_par(par); /* Current par will be new par */
goto set_screen_base; /* Don't forget this */
}
/* Only some fixed resolutions < 640x400 */
if (xres <= 320)
xres = 320;
else if (xres <= 640 && bpp != 16)
xres = 640;
if (yres <= 200)
yres = 200;
else if (yres <= 240)
yres = 240;
else if (yres <= 400)
yres = 400;
/* 2 planes must use STE compatibility mode */
par->hw.falcon.ste_mode = bpp == 2;
par->hw.falcon.mono = bpp == 1;
/* Total and visible scanline length must be a multiple of one longword,
* this and the console fontwidth yields the alignment for xres and
* xres_virtual.
* TODO: this way "odd" fontheights are not supported
*
* Special case in STE mode: blank and graphic positions don't align,
* avoid trash at right margin
*/
if (par->hw.falcon.ste_mode)
xres = (xres + 63) & ~63;
else if (bpp == 1)
xres = (xres + 31) & ~31;
else
xres = (xres + 15) & ~15;
if (yres >= 400)
yres = (yres + 15) & ~15;
else
yres = (yres + 7) & ~7;
if (xres_virtual < xres)
xres_virtual = xres;
else if (bpp == 1)
xres_virtual = (xres_virtual + 31) & ~31;
else
xres_virtual = (xres_virtual + 15) & ~15;
if (yres_virtual <= 0)
yres_virtual = 0;
else if (yres_virtual < yres)
yres_virtual = yres;
/* backward bug-compatibility */
if (var->pixclock > 1)
var->pixclock -= 1;
par->hw.falcon.line_width = bpp * xres / 16;
par->hw.falcon.line_offset = bpp * (xres_virtual - xres) / 16;
/* single or double pixel width */
xstretch = (xres < 640) ? 2 : 1;
#if 0 /* SM124 supports only 640x400, this is rejected above */
if (mon_type == F_MON_SM) {
if (xres != 640 && yres != 400)
return -EINVAL;
plen = 1;
pclock = &f32;
/* SM124-mode is special */
par->hw.falcon.ste_mode = 1;
par->hw.falcon.f_shift = 0x000;
par->hw.falcon.st_shift = 0x200;
left_margin = hsync_len = 128 / plen;
right_margin = 0;
/* TODO set all margins */
} else
#endif
if (mon_type == F_MON_SC || mon_type == F_MON_TV) {
plen = 2 * xstretch;
if (var->pixclock > f32.t * plen)
return -EINVAL;
pclock = &f32;
if (yres > 240)
interlace = 1;
if (var->pixclock == 0) {
/* set some minimal margins which center the screen */
left_margin = 32;
right_margin = 18;
hsync_len = pclock->hsync / plen;
upper_margin = 31;
lower_margin = 14;
vsync_len = interlace ? 3 : 4;
} else {
left_margin = var->left_margin;
right_margin = var->right_margin;
hsync_len = var->hsync_len;
upper_margin = var->upper_margin;
lower_margin = var->lower_margin;
vsync_len = var->vsync_len;
if (var->vmode & FB_VMODE_INTERLACED) {
upper_margin = (upper_margin + 1) / 2;
lower_margin = (lower_margin + 1) / 2;
vsync_len = (vsync_len + 1) / 2;
} else if (var->vmode & FB_VMODE_DOUBLE) {
upper_margin *= 2;
lower_margin *= 2;
vsync_len *= 2;
}
}
} else { /* F_MON_VGA */
if (bpp == 16)
xstretch = 2; /* Double pixel width only for hicolor */
/* Default values are used for vert./hor. timing if no pixelclock given. */
if (var->pixclock == 0) {
int linesize;
/* Choose master pixelclock depending on hor. timing */
plen = 1 * xstretch;
if ((plen * xres + f25.right + f25.hsync + f25.left) *
fb_info.monspecs.hfmin < f25.f)
pclock = &f25;
else if ((plen * xres + f32.right + f32.hsync +
f32.left) * fb_info.monspecs.hfmin < f32.f)
pclock = &f32;
else if ((plen * xres + fext.right + fext.hsync +
fext.left) * fb_info.monspecs.hfmin < fext.f &&
fext.f)
pclock = &fext;
else
return -EINVAL;
left_margin = pclock->left / plen;
right_margin = pclock->right / plen;
hsync_len = pclock->hsync / plen;
linesize = left_margin + xres + right_margin + hsync_len;
upper_margin = 31;
lower_margin = 11;
vsync_len = 3;
} else {
/* Choose largest pixelclock <= wanted clock */
int i;
unsigned long pcl = ULONG_MAX;
pclock = 0;
for (i = 1; i <= 4; i *= 2) {
if (f25.t * i >= var->pixclock &&
f25.t * i < pcl) {
pcl = f25.t * i;
pclock = &f25;
}
if (f32.t * i >= var->pixclock &&
f32.t * i < pcl) {
pcl = f32.t * i;
pclock = &f32;
}
if (fext.t && fext.t * i >= var->pixclock &&
fext.t * i < pcl) {
pcl = fext.t * i;
pclock = &fext;
}
}
if (!pclock)
return -EINVAL;
plen = pcl / pclock->t;
left_margin = var->left_margin;
right_margin = var->right_margin;
hsync_len = var->hsync_len;
upper_margin = var->upper_margin;
lower_margin = var->lower_margin;
vsync_len = var->vsync_len;
/* Internal unit is [single lines per (half-)frame] */
if (var->vmode & FB_VMODE_INTERLACED) {
/* # lines in half frame */
/* External unit is [lines per full frame] */
upper_margin = (upper_margin + 1) / 2;
lower_margin = (lower_margin + 1) / 2;
vsync_len = (vsync_len + 1) / 2;
} else if (var->vmode & FB_VMODE_DOUBLE) {
/* External unit is [double lines per frame] */
upper_margin *= 2;
lower_margin *= 2;
vsync_len *= 2;
}
}
if (pclock == &fext)
longoffset = 1; /* VIDEL doesn't synchronize on short offset */
}
/* Is video bus bandwidth (32MB/s) too low for this resolution? */
/* this is definitely wrong if bus clock != 32MHz */
if (pclock->f / plen / 8 * bpp > 32000000L)
return -EINVAL;
if (vsync_len < 1)
vsync_len = 1;
/* include sync lengths in right/lower margin for all calculations */
right_margin += hsync_len;
lower_margin += vsync_len;
/* ! In all calculations of margins we use # of lines in half frame
* (which is a full frame in non-interlace mode), so we can switch
* between interlace and non-interlace without messing around
* with these.
*/
again:
/* Set base_offset 128 and video bus width */
par->hw.falcon.vid_control = mon_type | f030_bus_width;
if (!longoffset)
par->hw.falcon.vid_control |= VCO_SHORTOFFS; /* base_offset 64 */
if (var->sync & FB_SYNC_HOR_HIGH_ACT)
par->hw.falcon.vid_control |= VCO_HSYPOS;
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
par->hw.falcon.vid_control |= VCO_VSYPOS;
/* Pixelclock */
par->hw.falcon.vid_control |= pclock->control_mask;
/* External or internal clock */
par->hw.falcon.sync = pclock->sync_mask | 0x2;
/* Pixellength and prescale */
par->hw.falcon.vid_mode = (2 / plen) << 2;
if (doubleline)
par->hw.falcon.vid_mode |= VMO_DOUBLE;
if (interlace)
par->hw.falcon.vid_mode |= VMO_INTER;
/*********************
* Horizontal timing: unit = [master clock cycles]
* unit of hxx-registers: [master clock cycles * prescale]
* Hxx-registers are 9 bit wide
*
* 1 line = ((hht + 2) * 2 * prescale) clock cycles
*
* graphic output = hdb & 0x200 ?
* ((hht + 2) * 2 - hdb + hde) * prescale - hdboff + hdeoff:
* (hht + 2 - hdb + hde) * prescale - hdboff + hdeoff
* (this must be a multiple of plen*128/bpp, on VGA pixels
* to the right may be cut off with a bigger right margin)
*
* start of graphics relative to start of 1st halfline = hdb & 0x200 ?
* (hdb - hht - 2) * prescale + hdboff :
* hdb * prescale + hdboff
*
* end of graphics relative to start of 1st halfline =
* (hde + hht + 2) * prescale + hdeoff
*********************/
/* Calculate VIDEL registers */
{
prescale = hxx_prescale(&par->hw.falcon);
base_off = par->hw.falcon.vid_control & VCO_SHORTOFFS ? 64 : 128;
/* Offsets depend on video mode */
/* Offsets are in clock cycles, divide by prescale to
* calculate hd[be]-registers
*/
if (par->hw.falcon.f_shift & 0x100) {
align = 1;
hde_off = 0;
hdb_off = (base_off + 16 * plen) + prescale;
} else {
align = 128 / bpp;
hde_off = ((128 / bpp + 2) * plen);
if (par->hw.falcon.ste_mode)
hdb_off = (64 + base_off + (128 / bpp + 2) * plen) + prescale;
else
hdb_off = (base_off + (128 / bpp + 18) * plen) + prescale;
}
gstart = (prescale / 2 + plen * left_margin) / prescale;
/* gend1 is for hde (gend-gstart multiple of align), shifter's xres */
gend1 = gstart + roundup(xres, align) * plen / prescale;
/* gend2 is for hbb, visible xres (rest to gend1 is cut off by hblank) */
gend2 = gstart + xres * plen / prescale;
par->HHT = plen * (left_margin + xres + right_margin) /
(2 * prescale) - 2;
/* par->HHT = (gend2 + plen * right_margin / prescale) / 2 - 2;*/
par->HDB = gstart - hdb_off / prescale;
par->HBE = gstart;
if (par->HDB < 0)
par->HDB += par->HHT + 2 + 0x200;
par->HDE = gend1 - par->HHT - 2 - hde_off / prescale;
par->HBB = gend2 - par->HHT - 2;
#if 0
/* One more Videl constraint: data fetch of two lines must not overlap */
if ((par->HDB & 0x200) && (par->HDB & ~0x200) - par->HDE <= 5) {
/* if this happens increase margins, decrease hfreq. */
}
#endif
if (hde_off % prescale)
par->HBB++; /* compensate for non matching hde and hbb */
par->HSS = par->HHT + 2 - plen * hsync_len / prescale;
if (par->HSS < par->HBB)
par->HSS = par->HBB;
}
/* check hor. frequency */
hfreq = pclock->f / ((par->HHT + 2) * prescale * 2);
if (hfreq > fb_info.monspecs.hfmax && mon_type != F_MON_VGA) {
/* ++guenther: ^^^^^^^^^^^^^^^^^^^ can't remember why I did this */
/* Too high -> enlarge margin */
left_margin += 1;
right_margin += 1;
goto again;
}
if (hfreq > fb_info.monspecs.hfmax || hfreq < fb_info.monspecs.hfmin)
return -EINVAL;
/* Vxx-registers */
/* All Vxx must be odd in non-interlace, since frame starts in the middle
* of the first displayed line!
* One frame consists of VFT+1 half lines. VFT+1 must be even in
* non-interlace, odd in interlace mode for synchronisation.
* Vxx-registers are 11 bit wide
*/
par->VBE = (upper_margin * 2 + 1); /* must begin on odd halfline */
par->VDB = par->VBE;
par->VDE = yres;
if (!interlace)
par->VDE <<= 1;
if (doubleline)
par->VDE <<= 1; /* VDE now half lines per (half-)frame */
par->VDE += par->VDB;
par->VBB = par->VDE;
par->VFT = par->VBB + (lower_margin * 2 - 1) - 1;
par->VSS = par->VFT + 1 - (vsync_len * 2 - 1);
/* vbb,vss,vft must be even in interlace mode */
if (interlace) {
par->VBB++;
par->VSS++;
par->VFT++;
}
/* V-frequency check, hope I didn't create any loop here. */
/* Interlace and doubleline are mutually exclusive. */
vfreq = (hfreq * 2) / (par->VFT + 1);
if (vfreq > fb_info.monspecs.vfmax && !doubleline && !interlace) {
/* Too high -> try again with doubleline */
doubleline = 1;
goto again;
} else if (vfreq < fb_info.monspecs.vfmin && !interlace && !doubleline) {
/* Too low -> try again with interlace */
interlace = 1;
goto again;
} else if (vfreq < fb_info.monspecs.vfmin && doubleline) {
/* Doubleline too low -> clear doubleline and enlarge margins */
int lines;
doubleline = 0;
for (lines = 0;
(hfreq * 2) / (par->VFT + 1 + 4 * lines - 2 * yres) >
fb_info.monspecs.vfmax;
lines++)
;
upper_margin += lines;
lower_margin += lines;
goto again;
} else if (vfreq > fb_info.monspecs.vfmax && doubleline) {
/* Doubleline too high -> enlarge margins */
int lines;
for (lines = 0;
(hfreq * 2) / (par->VFT + 1 + 4 * lines) >
fb_info.monspecs.vfmax;
lines += 2)
;
upper_margin += lines;
lower_margin += lines;
goto again;
} else if (vfreq > fb_info.monspecs.vfmax && interlace) {
/* Interlace, too high -> enlarge margins */
int lines;
for (lines = 0;
(hfreq * 2) / (par->VFT + 1 + 4 * lines) >
fb_info.monspecs.vfmax;
lines++)
;
upper_margin += lines;
lower_margin += lines;
goto again;
} else if (vfreq < fb_info.monspecs.vfmin ||
vfreq > fb_info.monspecs.vfmax)
return -EINVAL;
set_screen_base:
linelen = xres_virtual * bpp / 8;
if (yres_virtual * linelen > screen_len && screen_len)
return -EINVAL;
if (yres * linelen > screen_len && screen_len)
return -EINVAL;
if (var->yoffset + yres > yres_virtual && yres_virtual)
return -EINVAL;
par->yres_virtual = yres_virtual;
par->screen_base = screen_base + var->yoffset * linelen;
par->hw.falcon.xoffset = 0;
par->next_line = linelen;
return 0;
}
static int falcon_encode_var(struct fb_var_screeninfo *var,
struct atafb_par *par)
{
/* !!! only for VGA !!! */
int linelen;
int prescale, plen;
int hdb_off, hde_off, base_off;
struct falcon_hw *hw = &par->hw.falcon;
memset(var, 0, sizeof(struct fb_var_screeninfo));
/* possible frequencies: 25.175 or 32MHz */
var->pixclock = hw->sync & 0x1 ? fext.t :
hw->vid_control & VCO_CLOCK25 ? f25.t : f32.t;
var->height = -1;
var->width = -1;
var->sync = 0;
if (hw->vid_control & VCO_HSYPOS)
var->sync |= FB_SYNC_HOR_HIGH_ACT;
if (hw->vid_control & VCO_VSYPOS)
var->sync |= FB_SYNC_VERT_HIGH_ACT;
var->vmode = FB_VMODE_NONINTERLACED;
if (hw->vid_mode & VMO_INTER)
var->vmode |= FB_VMODE_INTERLACED;
if (hw->vid_mode & VMO_DOUBLE)
var->vmode |= FB_VMODE_DOUBLE;
/* visible y resolution:
* Graphics display starts at line VDB and ends at line
* VDE. If interlace mode off unit of VC-registers is
* half lines, else lines.
*/
var->yres = hw->vde - hw->vdb;
if (!(var->vmode & FB_VMODE_INTERLACED))
var->yres >>= 1;
if (var->vmode & FB_VMODE_DOUBLE)
var->yres >>= 1;
/*
* to get bpp, we must examine f_shift and st_shift.
* f_shift is valid if any of bits no. 10, 8 or 4
* is set. Priority in f_shift is: 10 ">" 8 ">" 4, i.e.
* if bit 10 set then bit 8 and bit 4 don't care...
* If all these bits are 0 get display depth from st_shift
* (as for ST and STE)
*/
if (hw->f_shift & 0x400) /* 2 colors */
var->bits_per_pixel = 1;
else if (hw->f_shift & 0x100) /* hicolor */
var->bits_per_pixel = 16;
else if (hw->f_shift & 0x010) /* 8 bitplanes */
var->bits_per_pixel = 8;
else if (hw->st_shift == 0)
var->bits_per_pixel = 4;
else if (hw->st_shift == 0x100)
var->bits_per_pixel = 2;
else /* if (hw->st_shift == 0x200) */
var->bits_per_pixel = 1;
var->xres = hw->line_width * 16 / var->bits_per_pixel;
var->xres_virtual = var->xres + hw->line_offset * 16 / var->bits_per_pixel;
if (hw->xoffset)
var->xres_virtual += 16;
if (var->bits_per_pixel == 16) {
var->red.offset = 11;
var->red.length = 5;
var->red.msb_right = 0;
var->green.offset = 5;
var->green.length = 6;
var->green.msb_right = 0;
var->blue.offset = 0;
var->blue.length = 5;
var->blue.msb_right = 0;
} else {
var->red.offset = 0;
var->red.length = hw->ste_mode ? 4 : 6;
if (var->red.length > var->bits_per_pixel)
var->red.length = var->bits_per_pixel;
var->red.msb_right = 0;
var->grayscale = 0;
var->blue = var->green = var->red;
}
var->transp.offset = 0;
var->transp.length = 0;
var->transp.msb_right = 0;
linelen = var->xres_virtual * var->bits_per_pixel / 8;
if (screen_len) {
if (par->yres_virtual)
var->yres_virtual = par->yres_virtual;
else
/* yres_virtual == 0 means use maximum */
var->yres_virtual = screen_len / linelen;
} else {
if (hwscroll < 0)
var->yres_virtual = 2 * var->yres;
else
var->yres_virtual = var->yres + hwscroll * 16;
}
var->xoffset = 0; /* TODO change this */
/* hdX-offsets */
prescale = hxx_prescale(hw);
plen = 4 >> (hw->vid_mode >> 2 & 0x3);
base_off = hw->vid_control & VCO_SHORTOFFS ? 64 : 128;
if (hw->f_shift & 0x100) {
hde_off = 0;
hdb_off = (base_off + 16 * plen) + prescale;
} else {
hde_off = ((128 / var->bits_per_pixel + 2) * plen);
if (hw->ste_mode)
hdb_off = (64 + base_off + (128 / var->bits_per_pixel + 2) * plen)
+ prescale;
else
hdb_off = (base_off + (128 / var->bits_per_pixel + 18) * plen)
+ prescale;
}
/* Right margin includes hsync */
var->left_margin = hdb_off + prescale * ((hw->hdb & 0x1ff) -
(hw->hdb & 0x200 ? 2 + hw->hht : 0));
if (hw->ste_mode || mon_type != F_MON_VGA)
var->right_margin = prescale * (hw->hht + 2 - hw->hde) - hde_off;
else
/* can't use this in ste_mode, because hbb is +1 off */
var->right_margin = prescale * (hw->hht + 2 - hw->hbb);
var->hsync_len = prescale * (hw->hht + 2 - hw->hss);
/* Lower margin includes vsync */
var->upper_margin = hw->vdb / 2; /* round down to full lines */
var->lower_margin = (hw->vft + 1 - hw->vde + 1) / 2; /* round up */
var->vsync_len = (hw->vft + 1 - hw->vss + 1) / 2; /* round up */
if (var->vmode & FB_VMODE_INTERLACED) {
var->upper_margin *= 2;
var->lower_margin *= 2;
var->vsync_len *= 2;
} else if (var->vmode & FB_VMODE_DOUBLE) {
var->upper_margin = (var->upper_margin + 1) / 2;
var->lower_margin = (var->lower_margin + 1) / 2;
var->vsync_len = (var->vsync_len + 1) / 2;
}
var->pixclock *= plen;
var->left_margin /= plen;
var->right_margin /= plen;
var->hsync_len /= plen;
var->right_margin -= var->hsync_len;
var->lower_margin -= var->vsync_len;
if (screen_base)
var->yoffset = (par->screen_base - screen_base) / linelen;
else
var->yoffset = 0;
var->nonstd = 0; /* what is this for? */
var->activate = 0;
return 0;
}
static int f_change_mode;
static struct falcon_hw f_new_mode;
static int f_pan_display;
static void falcon_get_par(struct atafb_par *par)
{
unsigned long addr;
struct falcon_hw *hw = &par->hw.falcon;
hw->line_width = shifter_f030.scn_width;
hw->line_offset = shifter_f030.off_next;
hw->st_shift = videl.st_shift & 0x300;
hw->f_shift = videl.f_shift;
hw->vid_control = videl.control;
hw->vid_mode = videl.mode;
hw->sync = shifter.syncmode & 0x1;
hw->xoffset = videl.xoffset & 0xf;
hw->hht = videl.hht;
hw->hbb = videl.hbb;
hw->hbe = videl.hbe;
hw->hdb = videl.hdb;
hw->hde = videl.hde;
hw->hss = videl.hss;
hw->vft = videl.vft;
hw->vbb = videl.vbb;
hw->vbe = videl.vbe;
hw->vdb = videl.vdb;
hw->vde = videl.vde;
hw->vss = videl.vss;
addr = (shifter.bas_hi & 0xff) << 16 |
(shifter.bas_md & 0xff) << 8 |
(shifter.bas_lo & 0xff);
par->screen_base = phys_to_virt(addr);
/* derived parameters */
hw->ste_mode = (hw->f_shift & 0x510) == 0 && hw->st_shift == 0x100;
hw->mono = (hw->f_shift & 0x400) ||
((hw->f_shift & 0x510) == 0 && hw->st_shift == 0x200);
}
static void falcon_set_par(struct atafb_par *par)
{
f_change_mode = 0;
/* only set screen_base if really necessary */
if (current_par.screen_base != par->screen_base)
fbhw->set_screen_base(par->screen_base);
/* Don't touch any other registers if we keep the default resolution */
if (DontCalcRes)
return;
/* Tell vbl-handler to change video mode.
* We change modes only on next VBL, to avoid desynchronisation
* (a shift to the right and wrap around by a random number of pixels
* in all monochrome modes).
* This seems to work on my Falcon.
*/
f_new_mode = par->hw.falcon;
f_change_mode = 1;
}
static irqreturn_t falcon_vbl_switcher(int irq, void *dummy)
{
struct falcon_hw *hw = &f_new_mode;
if (f_change_mode) {
f_change_mode = 0;
if (hw->sync & 0x1) {
/* Enable external pixelclock. This code only for ScreenWonder */
*(volatile unsigned short *)0xffff9202 = 0xffbf;
} else {
/* Turn off external clocks. Read sets all output bits to 1. */
*(volatile unsigned short *)0xffff9202;
}
shifter.syncmode = hw->sync;
videl.hht = hw->hht;
videl.hbb = hw->hbb;
videl.hbe = hw->hbe;
videl.hdb = hw->hdb;
videl.hde = hw->hde;
videl.hss = hw->hss;
videl.vft = hw->vft;
videl.vbb = hw->vbb;
videl.vbe = hw->vbe;
videl.vdb = hw->vdb;
videl.vde = hw->vde;
videl.vss = hw->vss;
videl.f_shift = 0; /* write enables Falcon palette, 0: 4 planes */
if (hw->ste_mode) {
videl.st_shift = hw->st_shift; /* write enables STE palette */
} else {
/* IMPORTANT:
* set st_shift 0, so we can tell the screen-depth if f_shift == 0.
* Writing 0 to f_shift enables 4 plane Falcon mode but
* doesn't set st_shift. st_shift != 0 (!= 4planes) is impossible
* with Falcon palette.
*/
videl.st_shift = 0;
/* now back to Falcon palette mode */
videl.f_shift = hw->f_shift;
}
/* writing to st_shift changed scn_width and vid_mode */
videl.xoffset = hw->xoffset;
shifter_f030.scn_width = hw->line_width;
shifter_f030.off_next = hw->line_offset;
videl.control = hw->vid_control;
videl.mode = hw->vid_mode;
}
if (f_pan_display) {
f_pan_display = 0;
videl.xoffset = current_par.hw.falcon.xoffset;
shifter_f030.off_next = current_par.hw.falcon.line_offset;
}
return IRQ_HANDLED;
}
static int falcon_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct atafb_par *par = (struct atafb_par *)info->par;
int xoffset;
int bpp = info->var.bits_per_pixel;
if (bpp == 1)
var->xoffset = up(var->xoffset, 32);
if (bpp != 16)
par->hw.falcon.xoffset = var->xoffset & 15;
else {
par->hw.falcon.xoffset = 0;
var->xoffset = up(var->xoffset, 2);
}
par->hw.falcon.line_offset = bpp *
(info->var.xres_virtual - info->var.xres) / 16;
if (par->hw.falcon.xoffset)
par->hw.falcon.line_offset -= bpp;
xoffset = var->xoffset - par->hw.falcon.xoffset;
par->screen_base = screen_base +
(var->yoffset * info->var.xres_virtual + xoffset) * bpp / 8;
if (fbhw->set_screen_base)
fbhw->set_screen_base(par->screen_base);
else
return -EINVAL; /* shouldn't happen */
f_pan_display = 1;
return 0;
}
static int falcon_setcolreg(unsigned int regno, unsigned int red,
unsigned int green, unsigned int blue,
unsigned int transp, struct fb_info *info)
{
if (regno > 255)
return 1;
f030_col[regno] = (((red & 0xfc00) << 16) |
((green & 0xfc00) << 8) |
((blue & 0xfc00) >> 8));
if (regno < 16) {
shifter_tt.color_reg[regno] =
(((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
(((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
#ifdef ATAFB_FALCON
((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11));
#endif
}
return 0;
}
static int falcon_blank(int blank_mode)
{
/* ++guenther: we can switch off graphics by changing VDB and VDE,
* so VIDEL doesn't hog the bus while saving.
* (this may affect usleep()).
*/
int vdb, vss, hbe, hss;
if (mon_type == F_MON_SM) /* this doesn't work on SM124 */
return 1;
vdb = current_par.VDB;
vss = current_par.VSS;
hbe = current_par.HBE;
hss = current_par.HSS;
if (blank_mode >= 1) {
/* disable graphics output (this speeds up the CPU) ... */
vdb = current_par.VFT + 1;
/* ... and blank all lines */
hbe = current_par.HHT + 2;
}
/* use VESA suspend modes on VGA monitors */
if (mon_type == F_MON_VGA) {
if (blank_mode == 2 || blank_mode == 4)
vss = current_par.VFT + 1;
if (blank_mode == 3 || blank_mode == 4)
hss = current_par.HHT + 2;
}
videl.vdb = vdb;
videl.vss = vss;
videl.hbe = hbe;
videl.hss = hss;
return 0;
}
static int falcon_detect(void)
{
struct atafb_par par;
unsigned char fhw;
/* Determine connected monitor and set monitor parameters */
fhw = *(unsigned char *)0xffff8006;
mon_type = fhw >> 6 & 0x3;
/* bit 1 of fhw: 1=32 bit ram bus, 0=16 bit */
f030_bus_width = fhw << 6 & 0x80;
switch (mon_type) {
case F_MON_SM:
fb_info.monspecs.vfmin = 70;
fb_info.monspecs.vfmax = 72;
fb_info.monspecs.hfmin = 35713;
fb_info.monspecs.hfmax = 35715;
break;
case F_MON_SC:
case F_MON_TV:
/* PAL...NTSC */
fb_info.monspecs.vfmin = 49; /* not 50, since TOS defaults to 49.9x Hz */
fb_info.monspecs.vfmax = 60;
fb_info.monspecs.hfmin = 15620;
fb_info.monspecs.hfmax = 15755;
break;
}
/* initialize hsync-len */
f25.hsync = h_syncs[mon_type] / f25.t;
f32.hsync = h_syncs[mon_type] / f32.t;
if (fext.t)
fext.hsync = h_syncs[mon_type] / fext.t;
falcon_get_par(&par);
falcon_encode_var(&atafb_predefined[0], &par);
/* Detected mode is always the "autodetect" slot */
return 1;
}
#endif /* ATAFB_FALCON */
/* ------------------- ST(E) specific functions ---------------------- */
#ifdef ATAFB_STE
static int stste_encode_fix(struct fb_fix_screeninfo *fix,
struct atafb_par *par)
{
int mode;
strcpy(fix->id, "Atari Builtin");
fix->smem_start = (unsigned long)real_screen_base;
fix->smem_len = screen_len;
fix->type = FB_TYPE_INTERLEAVED_PLANES;
fix->type_aux = 2;
fix->visual = FB_VISUAL_PSEUDOCOLOR;
mode = par->hw.st.mode & 3;
if (mode == ST_HIGH) {
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
fix->visual = FB_VISUAL_MONO10;
}
if (ATARIHW_PRESENT(EXTD_SHIFTER)) {
fix->xpanstep = 16;
fix->ypanstep = 1;
} else {
fix->xpanstep = 0;
fix->ypanstep = 0;
}
fix->ywrapstep = 0;
fix->line_length = par->next_line;
fix->accel = FB_ACCEL_ATARIBLITT;
return 0;
}
static int stste_decode_var(struct fb_var_screeninfo *var,
struct atafb_par *par)
{
int xres = var->xres;
int yres = var->yres;
int bpp = var->bits_per_pixel;
int linelen;
int yres_virtual = var->yres_virtual;
if (mono_moni) {
if (bpp > 1 || xres > sttt_xres || yres > st_yres)
return -EINVAL;
par->hw.st.mode = ST_HIGH;
xres = sttt_xres;
yres = st_yres;
bpp = 1;
} else {
if (bpp > 4 || xres > sttt_xres || yres > st_yres)
return -EINVAL;
if (bpp > 2) {
if (xres > sttt_xres / 2 || yres > st_yres / 2)
return -EINVAL;
par->hw.st.mode = ST_LOW;
xres = sttt_xres / 2;
yres = st_yres / 2;
bpp = 4;
} else if (bpp > 1) {
if (xres > sttt_xres || yres > st_yres / 2)
return -EINVAL;
par->hw.st.mode = ST_MID;
xres = sttt_xres;
yres = st_yres / 2;
bpp = 2;
} else
return -EINVAL;
}
if (yres_virtual <= 0)
yres_virtual = 0;
else if (yres_virtual < yres)
yres_virtual = yres;
if (var->sync & FB_SYNC_EXT)
par->hw.st.sync = (par->hw.st.sync & ~1) | 1;
else
par->hw.st.sync = (par->hw.st.sync & ~1);
linelen = xres * bpp / 8;
if (yres_virtual * linelen > screen_len && screen_len)
return -EINVAL;
if (yres * linelen > screen_len && screen_len)
return -EINVAL;
if (var->yoffset + yres > yres_virtual && yres_virtual)
return -EINVAL;
par->yres_virtual = yres_virtual;
par->screen_base = screen_base + var->yoffset * linelen;
par->next_line = linelen;
return 0;
}
static int stste_encode_var(struct fb_var_screeninfo *var,
struct atafb_par *par)
{
int linelen;
memset(var, 0, sizeof(struct fb_var_screeninfo));
var->red.offset = 0;
var->red.length = ATARIHW_PRESENT(EXTD_SHIFTER) ? 4 : 3;
var->red.msb_right = 0;
var->grayscale = 0;
var->pixclock = 31041;
var->left_margin = 120; /* these are incorrect */
var->right_margin = 100;
var->upper_margin = 8;
var->lower_margin = 16;
var->hsync_len = 140;
var->vsync_len = 30;
var->height = -1;
var->width = -1;
if (!(par->hw.st.sync & 1))
var->sync = 0;
else
var->sync = FB_SYNC_EXT;
switch (par->hw.st.mode & 3) {
case ST_LOW:
var->xres = sttt_xres / 2;
var->yres = st_yres / 2;
var->bits_per_pixel = 4;
break;
case ST_MID:
var->xres = sttt_xres;
var->yres = st_yres / 2;
var->bits_per_pixel = 2;
break;
case ST_HIGH:
var->xres = sttt_xres;
var->yres = st_yres;
var->bits_per_pixel = 1;
break;
}
var->blue = var->green = var->red;
var->transp.offset = 0;
var->transp.length = 0;
var->transp.msb_right = 0;
var->xres_virtual = sttt_xres_virtual;
linelen = var->xres_virtual * var->bits_per_pixel / 8;
ovsc_addlen = linelen * (sttt_yres_virtual - st_yres);
if (!use_hwscroll)
var->yres_virtual = var->yres;
else if (screen_len) {
if (par->yres_virtual)
var->yres_virtual = par->yres_virtual;
else
/* yres_virtual == 0 means use maximum */
var->yres_virtual = screen_len / linelen;
} else {
if (hwscroll < 0)
var->yres_virtual = 2 * var->yres;
else
var->yres_virtual = var->yres + hwscroll * 16;
}
var->xoffset = 0;
if (screen_base)
var->yoffset = (par->screen_base - screen_base) / linelen;
else
var->yoffset = 0;
var->nonstd = 0;
var->activate = 0;
var->vmode = FB_VMODE_NONINTERLACED;
return 0;
}
static void stste_get_par(struct atafb_par *par)
{
unsigned long addr;
par->hw.st.mode = shifter_tt.st_shiftmode;
par->hw.st.sync = shifter.syncmode;
addr = ((shifter.bas_hi & 0xff) << 16) |
((shifter.bas_md & 0xff) << 8);
if (ATARIHW_PRESENT(EXTD_SHIFTER))
addr |= (shifter.bas_lo & 0xff);
par->screen_base = phys_to_virt(addr);
}
static void stste_set_par(struct atafb_par *par)
{
shifter_tt.st_shiftmode = par->hw.st.mode;
shifter.syncmode = par->hw.st.sync;
/* only set screen_base if really necessary */
if (current_par.screen_base != par->screen_base)
fbhw->set_screen_base(par->screen_base);
}
static int stste_setcolreg(unsigned int regno, unsigned int red,
unsigned int green, unsigned int blue,
unsigned int transp, struct fb_info *info)
{
if (regno > 15)
return 1;
red >>= 12;
blue >>= 12;
green >>= 12;
if (ATARIHW_PRESENT(EXTD_SHIFTER))
shifter_tt.color_reg[regno] =
(((red & 0xe) >> 1) | ((red & 1) << 3) << 8) |
(((green & 0xe) >> 1) | ((green & 1) << 3) << 4) |
((blue & 0xe) >> 1) | ((blue & 1) << 3);
else
shifter_tt.color_reg[regno] =
((red & 0xe) << 7) |
((green & 0xe) << 3) |
((blue & 0xe) >> 1);
return 0;
}
static int stste_detect(void)
{
struct atafb_par par;
/* Determine the connected monitor: The DMA sound must be
* disabled before reading the MFP GPIP, because the Sound
* Done Signal and the Monochrome Detect are XORed together!
*/
if (ATARIHW_PRESENT(PCM_8BIT)) {
tt_dmasnd.ctrl = DMASND_CTRL_OFF;
udelay(20); /* wait a while for things to settle down */
}
mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
stste_get_par(&par);
stste_encode_var(&atafb_predefined[0], &par);
if (!ATARIHW_PRESENT(EXTD_SHIFTER))
use_hwscroll = 0;
return 1;
}
static void stste_set_screen_base(void *s_base)
{
unsigned long addr;
addr = virt_to_phys(s_base);
/* Setup Screen Memory */
shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
if (ATARIHW_PRESENT(EXTD_SHIFTER))
shifter.bas_lo = (unsigned char)(addr & 0x0000ff);
}
#endif /* ATAFB_STE */
/* Switching the screen size should be done during vsync, otherwise
* the margins may get messed up. This is a well known problem of
* the ST's video system.
*
* Unfortunately there is hardly any way to find the vsync, as the
* vertical blank interrupt is no longer in time on machines with
* overscan type modifications.
*
* We can, however, use Timer B to safely detect the black shoulder,
* but then we've got to guess an appropriate delay to find the vsync.
* This might not work on every machine.
*
* martin_rogge @ ki.maus.de, 8th Aug 1995
*/
#define LINE_DELAY (mono_moni ? 30 : 70)
#define SYNC_DELAY (mono_moni ? 1500 : 2000)
/* SWITCH_ACIA may be used for Falcon (ScreenBlaster III internal!) */
static void st_ovsc_switch(void)
{
unsigned long flags;
register unsigned char old, new;
if (!(atari_switches & ATARI_SWITCH_OVSC_MASK))
return;
local_irq_save(flags);
st_mfp.tim_ct_b = 0x10;
st_mfp.active_edge |= 8;
st_mfp.tim_ct_b = 0;
st_mfp.tim_dt_b = 0xf0;
st_mfp.tim_ct_b = 8;
while (st_mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */
;
new = st_mfp.tim_dt_b;
do {
udelay(LINE_DELAY);
old = new;
new = st_mfp.tim_dt_b;
} while (old != new);
st_mfp.tim_ct_b = 0x10;
udelay(SYNC_DELAY);
if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID | ACIA_RIE;
if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
if (atari_switches & (ATARI_SWITCH_OVSC_SND6|ATARI_SWITCH_OVSC_SND7)) {
sound_ym.rd_data_reg_sel = 14;
sound_ym.wd_data = sound_ym.rd_data_reg_sel |
((atari_switches & ATARI_SWITCH_OVSC_SND6) ? 0x40:0) |
((atari_switches & ATARI_SWITCH_OVSC_SND7) ? 0x80:0);
}
local_irq_restore(flags);
}
/* ------------------- External Video ---------------------- */
#ifdef ATAFB_EXT
static int ext_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
{
strcpy(fix->id, "Unknown Extern");
fix->smem_start = (unsigned long)external_addr;
fix->smem_len = PAGE_ALIGN(external_len);
if (external_depth == 1) {
fix->type = FB_TYPE_PACKED_PIXELS;
/* The letters 'n' and 'i' in the "atavideo=external:" stand
* for "normal" and "inverted", rsp., in the monochrome case */
fix->visual =
(external_pmode == FB_TYPE_INTERLEAVED_PLANES ||
external_pmode == FB_TYPE_PACKED_PIXELS) ?
FB_VISUAL_MONO10 : FB_VISUAL_MONO01;
} else {
/* Use STATIC if we don't know how to access color registers */
int visual = external_vgaiobase ?
FB_VISUAL_PSEUDOCOLOR :
FB_VISUAL_STATIC_PSEUDOCOLOR;
switch (external_pmode) {
case -1: /* truecolor */
fix->type = FB_TYPE_PACKED_PIXELS;
fix->visual = FB_VISUAL_TRUECOLOR;
break;
case FB_TYPE_PACKED_PIXELS:
fix->type = FB_TYPE_PACKED_PIXELS;
fix->visual = visual;
break;
case FB_TYPE_PLANES:
fix->type = FB_TYPE_PLANES;
fix->visual = visual;
break;
case FB_TYPE_INTERLEAVED_PLANES:
fix->type = FB_TYPE_INTERLEAVED_PLANES;
fix->type_aux = 2;
fix->visual = visual;
break;
}
}
fix->xpanstep = 0;
fix->ypanstep = 0;
fix->ywrapstep = 0;
fix->line_length = par->next_line;
return 0;
}
static int ext_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
{
struct fb_var_screeninfo *myvar = &atafb_predefined[0];
if (var->bits_per_pixel > myvar->bits_per_pixel ||
var->xres > myvar->xres ||
var->xres_virtual > myvar->xres_virtual ||
var->yres > myvar->yres ||
var->xoffset > 0 ||
var->yoffset > 0)
return -EINVAL;
par->next_line = external_xres_virtual * external_depth / 8;
return 0;
}
static int ext_encode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
{
memset(var, 0, sizeof(struct fb_var_screeninfo));
var->red.offset = 0;
var->red.length = (external_pmode == -1) ? external_depth / 3 :
(external_vgaiobase ? external_bitspercol : 0);
var->red.msb_right = 0;
var->grayscale = 0;
var->pixclock = 31041;
var->left_margin = 120; /* these are surely incorrect */
var->right_margin = 100;
var->upper_margin = 8;
var->lower_margin = 16;
var->hsync_len = 140;
var->vsync_len = 30;
var->height = -1;
var->width = -1;
var->sync = 0;
var->xres = external_xres;
var->yres = external_yres;
var->xres_virtual = external_xres_virtual;
var->bits_per_pixel = external_depth;
var->blue = var->green = var->red;
var->transp.offset = 0;
var->transp.length = 0;
var->transp.msb_right = 0;
var->yres_virtual = var->yres;
var->xoffset = 0;
var->yoffset = 0;
var->nonstd = 0;
var->activate = 0;
var->vmode = FB_VMODE_NONINTERLACED;
return 0;
}
static void ext_get_par(struct atafb_par *par)
{
par->screen_base = external_addr;
}
static void ext_set_par(struct atafb_par *par)
{
}
#define OUTB(port,val) \
*((unsigned volatile char *) ((port)+external_vgaiobase)) = (val)
#define INB(port) \
(*((unsigned volatile char *) ((port)+external_vgaiobase)))
#define DACDelay \
do { \
unsigned char tmp = INB(0x3da); \
tmp = INB(0x3da); \
} while (0)
static int ext_setcolreg(unsigned int regno, unsigned int red,
unsigned int green, unsigned int blue,
unsigned int transp, struct fb_info *info)
{
unsigned char colmask = (1 << external_bitspercol) - 1;
if (!external_vgaiobase)
return 1;
if (regno > 255)
return 1;
switch (external_card_type) {
case IS_VGA:
OUTB(0x3c8, regno);
DACDelay;
OUTB(0x3c9, red & colmask);
DACDelay;
OUTB(0x3c9, green & colmask);
DACDelay;
OUTB(0x3c9, blue & colmask);
DACDelay;
return 0;
case IS_MV300:
OUTB((MV300_reg[regno] << 2) + 1, red);
OUTB((MV300_reg[regno] << 2) + 1, green);
OUTB((MV300_reg[regno] << 2) + 1, blue);
return 0;
default:
return 1;
}
}
static int ext_detect(void)
{
struct fb_var_screeninfo *myvar = &atafb_predefined[0];
struct atafb_par dummy_par;
myvar->xres = external_xres;
myvar->xres_virtual = external_xres_virtual;
myvar->yres = external_yres;
myvar->bits_per_pixel = external_depth;
ext_encode_var(myvar, &dummy_par);
return 1;
}
#endif /* ATAFB_EXT */
/* ------ This is the same for most hardware types -------- */
static void set_screen_base(void *s_base)
{
unsigned long addr;
addr = virt_to_phys(s_base);
/* Setup Screen Memory */
shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
shifter.bas_lo = (unsigned char)(addr & 0x0000ff);
}
static int pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct atafb_par *par = (struct atafb_par *)info->par;
if (!fbhw->set_screen_base ||
(!ATARIHW_PRESENT(EXTD_SHIFTER) && var->xoffset))
return -EINVAL;
var->xoffset = up(var->xoffset, 16);
par->screen_base = screen_base +
(var->yoffset * info->var.xres_virtual + var->xoffset)
* info->var.bits_per_pixel / 8;
fbhw->set_screen_base(par->screen_base);
return 0;
}
/* ------------ Interfaces to hardware functions ------------ */
#ifdef ATAFB_TT
static struct fb_hwswitch tt_switch = {
.detect = tt_detect,
.encode_fix = tt_encode_fix,
.decode_var = tt_decode_var,
.encode_var = tt_encode_var,
.get_par = tt_get_par,
.set_par = tt_set_par,
.set_screen_base = set_screen_base,
.pan_display = pan_display,
};
#endif
#ifdef ATAFB_FALCON
static struct fb_hwswitch falcon_switch = {
.detect = falcon_detect,
.encode_fix = falcon_encode_fix,
.decode_var = falcon_decode_var,
.encode_var = falcon_encode_var,
.get_par = falcon_get_par,
.set_par = falcon_set_par,
.set_screen_base = set_screen_base,
.blank = falcon_blank,
.pan_display = falcon_pan_display,
};
#endif
#ifdef ATAFB_STE
static struct fb_hwswitch st_switch = {
.detect = stste_detect,
.encode_fix = stste_encode_fix,
.decode_var = stste_decode_var,
.encode_var = stste_encode_var,
.get_par = stste_get_par,
.set_par = stste_set_par,
.set_screen_base = stste_set_screen_base,
.pan_display = pan_display
};
#endif
#ifdef ATAFB_EXT
static struct fb_hwswitch ext_switch = {
.detect = ext_detect,
.encode_fix = ext_encode_fix,
.decode_var = ext_decode_var,
.encode_var = ext_encode_var,
.get_par = ext_get_par,
.set_par = ext_set_par,
};
#endif
static void ata_get_par(struct atafb_par *par)
{
if (current_par_valid)
*par = current_par;
else
fbhw->get_par(par);
}
static void ata_set_par(struct atafb_par *par)
{
fbhw->set_par(par);
current_par = *par;
current_par_valid = 1;
}
/* =========================================================== */
/* ============== Hardware Independent Functions ============= */
/* =========================================================== */
/* used for hardware scrolling */
static int do_fb_set_var(struct fb_var_screeninfo *var, int isactive)
{
int err, activate;
struct atafb_par par;
err = fbhw->decode_var(var, &par);
if (err)
return err;
activate = var->activate;
if (((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) && isactive)
ata_set_par(&par);
fbhw->encode_var(var, &par);
var->activate = activate;
return 0;
}
/* fbhw->encode_fix() must be called with fb_info->mm_lock held
* if it is called after the register_framebuffer() - not a case here
*/
static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
{
struct atafb_par par;
int err;
// Get fix directly (case con == -1 before)??
err = fbhw->decode_var(&info->var, &par);
if (err)
return err;
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
err = fbhw->encode_fix(fix, &par);
return err;
}
static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct atafb_par par;
ata_get_par(&par);
fbhw->encode_var(var, &par);
return 0;
}
// No longer called by fbcon!
// Still called by set_var internally
static void atafb_set_disp(struct fb_info *info)
{
atafb_get_var(&info->var, info);
atafb_get_fix(&info->fix, info);
info->screen_base = (void *)info->fix.smem_start;
}
static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
red >>= 8;
green >>= 8;
blue >>= 8;
return info->fbops->fb_setcolreg(regno, red, green, blue, transp, info);
}
static int
atafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
{
int xoffset = var->xoffset;
int yoffset = var->yoffset;
int err;
if (var->vmode & FB_VMODE_YWRAP) {
if (yoffset < 0 || yoffset >= info->var.yres_virtual || xoffset)
return -EINVAL;
} else {
if (xoffset + info->var.xres > info->var.xres_virtual ||
yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
}
if (fbhw->pan_display) {
err = fbhw->pan_display(var, info);
if (err)
return err;
} else
return -EINVAL;
info->var.xoffset = xoffset;
info->var.yoffset = yoffset;
if (var->vmode & FB_VMODE_YWRAP)
info->var.vmode |= FB_VMODE_YWRAP;
else
info->var.vmode &= ~FB_VMODE_YWRAP;
return 0;
}
/*
* generic drawing routines; imageblit needs updating for image depth > 1
*/
#if BITS_PER_LONG == 32
#define BYTES_PER_LONG 4
#define SHIFT_PER_LONG 5
#elif BITS_PER_LONG == 64
#define BYTES_PER_LONG 8
#define SHIFT_PER_LONG 6
#else
#define Please update me
#endif
static void atafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct atafb_par *par = (struct atafb_par *)info->par;
int x2, y2;
u32 width, height;
if (!rect->width || !rect->height)
return;
#ifdef ATAFB_FALCON
if (info->var.bits_per_pixel == 16) {
cfb_fillrect(info, rect);
return;
}
#endif
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly.
* */
x2 = rect->dx + rect->width;
y2 = rect->dy + rect->height;
x2 = x2 < info->var.xres_virtual ? x2 : info->var.xres_virtual;
y2 = y2 < info->var.yres_virtual ? y2 : info->var.yres_virtual;
width = x2 - rect->dx;
height = y2 - rect->dy;
if (info->var.bits_per_pixel == 1)
atafb_mfb_fillrect(info, par->next_line, rect->color,
rect->dy, rect->dx, height, width);
else if (info->var.bits_per_pixel == 2)
atafb_iplan2p2_fillrect(info, par->next_line, rect->color,
rect->dy, rect->dx, height, width);
else if (info->var.bits_per_pixel == 4)
atafb_iplan2p4_fillrect(info, par->next_line, rect->color,
rect->dy, rect->dx, height, width);
else
atafb_iplan2p8_fillrect(info, par->next_line, rect->color,
rect->dy, rect->dx, height, width);
return;
}
static void atafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
{
struct atafb_par *par = (struct atafb_par *)info->par;
int x2, y2;
u32 dx, dy, sx, sy, width, height;
int rev_copy = 0;
#ifdef ATAFB_FALCON
if (info->var.bits_per_pixel == 16) {
cfb_copyarea(info, area);
return;
}
#endif
/* clip the destination */
x2 = area->dx + area->width;
y2 = area->dy + area->height;
dx = area->dx > 0 ? area->dx : 0;
dy = area->dy > 0 ? area->dy : 0;
x2 = x2 < info->var.xres_virtual ? x2 : info->var.xres_virtual;
y2 = y2 < info->var.yres_virtual ? y2 : info->var.yres_virtual;
width = x2 - dx;
height = y2 - dy;
if (area->sx + dx < area->dx || area->sy + dy < area->dy)
return;
/* update sx,sy */
sx = area->sx + (dx - area->dx);
sy = area->sy + (dy - area->dy);
/* the source must be completely inside the virtual screen */
if (sx + width > info->var.xres_virtual ||
sy + height > info->var.yres_virtual)
return;
if (dy > sy || (dy == sy && dx > sx)) {
dy += height;
sy += height;
rev_copy = 1;
}
if (info->var.bits_per_pixel == 1)
atafb_mfb_copyarea(info, par->next_line, sy, sx, dy, dx, height, width);
else if (info->var.bits_per_pixel == 2)
atafb_iplan2p2_copyarea(info, par->next_line, sy, sx, dy, dx, height, width);
else if (info->var.bits_per_pixel == 4)
atafb_iplan2p4_copyarea(info, par->next_line, sy, sx, dy, dx, height, width);
else
atafb_iplan2p8_copyarea(info, par->next_line, sy, sx, dy, dx, height, width);
return;
}
static void atafb_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct atafb_par *par = (struct atafb_par *)info->par;
int x2, y2;
unsigned long *dst;
int dst_idx;
const char *src;
u32 dx, dy, width, height, pitch;
#ifdef ATAFB_FALCON
if (info->var.bits_per_pixel == 16) {
cfb_imageblit(info, image);
return;
}
#endif
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly like we are
* doing here.
*/
x2 = image->dx + image->width;
y2 = image->dy + image->height;
dx = image->dx;
dy = image->dy;
x2 = x2 < info->var.xres_virtual ? x2 : info->var.xres_virtual;
y2 = y2 < info->var.yres_virtual ? y2 : info->var.yres_virtual;
width = x2 - dx;
height = y2 - dy;
if (image->depth == 1) {
// used for font data
dst = (unsigned long *)
((unsigned long)info->screen_base & ~(BYTES_PER_LONG - 1));
dst_idx = ((unsigned long)info->screen_base & (BYTES_PER_LONG - 1)) * 8;
dst_idx += dy * par->next_line * 8 + dx;
src = image->data;
pitch = (image->width + 7) / 8;
while (height--) {
if (info->var.bits_per_pixel == 1)
atafb_mfb_linefill(info, par->next_line,
dy, dx, width, src,
image->bg_color, image->fg_color);
else if (info->var.bits_per_pixel == 2)
atafb_iplan2p2_linefill(info, par->next_line,
dy, dx, width, src,
image->bg_color, image->fg_color);
else if (info->var.bits_per_pixel == 4)
atafb_iplan2p4_linefill(info, par->next_line,
dy, dx, width, src,
image->bg_color, image->fg_color);
else
atafb_iplan2p8_linefill(info, par->next_line,
dy, dx, width, src,
image->bg_color, image->fg_color);
dy++;
src += pitch;
}
} else {
c2p_iplan2(info->screen_base, image->data, dx, dy, width,
height, par->next_line, image->width,
info->var.bits_per_pixel);
}
}
static int
atafb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
#ifdef FBCMD_GET_CURRENTPAR
case FBCMD_GET_CURRENTPAR:
if (copy_to_user((void *)arg, (void *)&current_par,
sizeof(struct atafb_par)))
return -EFAULT;
return 0;
#endif
#ifdef FBCMD_SET_CURRENTPAR
case FBCMD_SET_CURRENTPAR:
if (copy_from_user((void *)&current_par, (void *)arg,
sizeof(struct atafb_par)))
return -EFAULT;
ata_set_par(&current_par);
return 0;
#endif
}
return -EINVAL;
}
/* (un)blank/poweroff
* 0 = unblank
* 1 = blank
* 2 = suspend vsync
* 3 = suspend hsync
* 4 = off
*/
static int atafb_blank(int blank, struct fb_info *info)
{
unsigned short black[16];
struct fb_cmap cmap;
if (fbhw->blank && !fbhw->blank(blank))
return 1;
if (blank) {
memset(black, 0, 16 * sizeof(unsigned short));
cmap.red = black;
cmap.green = black;
cmap.blue = black;
cmap.transp = NULL;
cmap.start = 0;
cmap.len = 16;
fb_set_cmap(&cmap, info);
}
#if 0
else
do_install_cmap(info);
#endif
return 0;
}
/*
* New fbcon interface ...
*/
/* check var by decoding var into hw par, rounding if necessary,
* then encoding hw par back into new, validated var */
static int atafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
int err;
struct atafb_par par;
/* Validate wanted screen parameters */
// if ((err = ata_decode_var(var, &par)))
err = fbhw->decode_var(var, &par);
if (err)
return err;
/* Encode (possibly rounded) screen parameters */
fbhw->encode_var(var, &par);
return 0;
}
/* actually set hw par by decoding var, then setting hardware from
* hw par just decoded */
static int atafb_set_par(struct fb_info *info)
{
struct atafb_par *par = (struct atafb_par *)info->par;
/* Decode wanted screen parameters */
fbhw->decode_var(&info->var, par);
mutex_lock(&info->mm_lock);
fbhw->encode_fix(&info->fix, par);
mutex_unlock(&info->mm_lock);
/* Set new videomode */
ata_set_par(par);
return 0;
}
static struct fb_ops atafb_ops = {
.owner = THIS_MODULE,
.fb_check_var = atafb_check_var,
.fb_set_par = atafb_set_par,
.fb_setcolreg = atafb_setcolreg,
.fb_blank = atafb_blank,
.fb_pan_display = atafb_pan_display,
.fb_fillrect = atafb_fillrect,
.fb_copyarea = atafb_copyarea,
.fb_imageblit = atafb_imageblit,
.fb_ioctl = atafb_ioctl,
};
static void check_default_par(int detected_mode)
{
char default_name[10];
int i;
struct fb_var_screeninfo var;
unsigned long min_mem;
/* First try the user supplied mode */
if (default_par) {
var = atafb_predefined[default_par - 1];
var.activate = FB_ACTIVATE_TEST;
if (do_fb_set_var(&var, 1))
default_par = 0; /* failed */
}
/* Next is the autodetected one */
if (!default_par) {
var = atafb_predefined[detected_mode - 1]; /* autodetect */
var.activate = FB_ACTIVATE_TEST;
if (!do_fb_set_var(&var, 1))
default_par = detected_mode;
}
/* If that also failed, try some default modes... */
if (!default_par) {
/* try default1, default2... */
for (i = 1; i < 10; i++) {
sprintf(default_name,"default%d", i);
default_par = get_video_mode(default_name);
if (!default_par)
panic("can't set default video mode");
var = atafb_predefined[default_par - 1];
var.activate = FB_ACTIVATE_TEST;
if (!do_fb_set_var(&var,1))
break; /* ok */
}
}
min_mem = var.xres_virtual * var.yres_virtual * var.bits_per_pixel / 8;
if (default_mem_req < min_mem)
default_mem_req = min_mem;
}
#ifdef ATAFB_EXT
static void __init atafb_setup_ext(char *spec)
{
int xres, xres_virtual, yres, depth, planes;
unsigned long addr, len;
char *p;
/* Format is: <xres>;<yres>;<depth>;<plane organ.>;
* <screen mem addr>
* [;<screen mem length>[;<vgaiobase>[;<bits-per-col>[;<colorreg-type>
* [;<xres-virtual>]]]]]
*
* 09/23/97 Juergen
* <xres_virtual>: hardware's x-resolution (f.e. ProMST)
*
* Even xres_virtual is available, we neither support panning nor hw-scrolling!
*/
p = strsep(&spec, ";");
if (!p || !*p)
return;
xres_virtual = xres = simple_strtoul(p, NULL, 10);
if (xres <= 0)
return;
p = strsep(&spec, ";");
if (!p || !*p)
return;
yres = simple_strtoul(p, NULL, 10);
if (yres <= 0)
return;
p = strsep(&spec, ";");
if (!p || !*p)
return;
depth = simple_strtoul(p, NULL, 10);
if (depth != 1 && depth != 2 && depth != 4 && depth != 8 &&
depth != 16 && depth != 24)
return;
p = strsep(&spec, ";");
if (!p || !*p)
return;
if (*p == 'i')
planes = FB_TYPE_INTERLEAVED_PLANES;
else if (*p == 'p')
planes = FB_TYPE_PACKED_PIXELS;
else if (*p == 'n')
planes = FB_TYPE_PLANES;
else if (*p == 't')
planes = -1; /* true color */
else
return;
p = strsep(&spec, ";");
if (!p || !*p)
return;
addr = simple_strtoul(p, NULL, 0);
p = strsep(&spec, ";");
if (!p || !*p)
len = xres * yres * depth / 8;
else
len = simple_strtoul(p, NULL, 0);
p = strsep(&spec, ";");
if (p && *p)
external_vgaiobase = simple_strtoul(p, NULL, 0);
p = strsep(&spec, ";");
if (p && *p) {
external_bitspercol = simple_strtoul(p, NULL, 0);
if (external_bitspercol > 8)
external_bitspercol = 8;
else if (external_bitspercol < 1)
external_bitspercol = 1;
}
p = strsep(&spec, ";");
if (p && *p) {
if (!strcmp(p, "vga"))
external_card_type = IS_VGA;
if (!strcmp(p, "mv300"))
external_card_type = IS_MV300;
}
p = strsep(&spec, ";");
if (p && *p) {
xres_virtual = simple_strtoul(p, NULL, 10);
if (xres_virtual < xres)
xres_virtual = xres;
if (xres_virtual * yres * depth / 8 > len)
len = xres_virtual * yres * depth / 8;
}
external_xres = xres;
external_xres_virtual = xres_virtual;
external_yres = yres;
external_depth = depth;
external_pmode = planes;
external_addr = (void *)addr;
external_len = len;
if (external_card_type == IS_MV300) {
switch (external_depth) {
case 1:
MV300_reg = MV300_reg_1bit;
break;
case 4:
MV300_reg = MV300_reg_4bit;
break;
case 8:
MV300_reg = MV300_reg_8bit;
break;
}
}
}
#endif /* ATAFB_EXT */
static void __init atafb_setup_int(char *spec)
{
/* Format to config extended internal video hardware like OverScan:
* "internal:<xres>;<yres>;<xres_max>;<yres_max>;<offset>"
* Explanation:
* <xres>: x-resolution
* <yres>: y-resolution
* The following are only needed if you have an overscan which
* needs a black border:
* <xres_max>: max. length of a line in pixels your OverScan hardware would allow
* <yres_max>: max. number of lines your OverScan hardware would allow
* <offset>: Offset from physical beginning to visible beginning
* of screen in bytes
*/
int xres;
char *p;
if (!(p = strsep(&spec, ";")) || !*p)
return;
xres = simple_strtoul(p, NULL, 10);
if (!(p = strsep(&spec, ";")) || !*p)
return;
sttt_xres = xres;
tt_yres = st_yres = simple_strtoul(p, NULL, 10);
if ((p = strsep(&spec, ";")) && *p)
sttt_xres_virtual = simple_strtoul(p, NULL, 10);
if ((p = strsep(&spec, ";")) && *p)
sttt_yres_virtual = simple_strtoul(p, NULL, 0);
if ((p = strsep(&spec, ";")) && *p)
ovsc_offset = simple_strtoul(p, NULL, 0);
if (ovsc_offset || (sttt_yres_virtual != st_yres))
use_hwscroll = 0;
}
#ifdef ATAFB_FALCON
static void __init atafb_setup_mcap(char *spec)
{
char *p;
int vmin, vmax, hmin, hmax;
/* Format for monitor capabilities is: <Vmin>;<Vmax>;<Hmin>;<Hmax>
* <V*> vertical freq. in Hz
* <H*> horizontal freq. in kHz
*/
if (!(p = strsep(&spec, ";")) || !*p)
return;
vmin = simple_strtoul(p, NULL, 10);
if (vmin <= 0)
return;
if (!(p = strsep(&spec, ";")) || !*p)
return;
vmax = simple_strtoul(p, NULL, 10);
if (vmax <= 0 || vmax <= vmin)
return;
if (!(p = strsep(&spec, ";")) || !*p)
return;
hmin = 1000 * simple_strtoul(p, NULL, 10);
if (hmin <= 0)
return;
if (!(p = strsep(&spec, "")) || !*p)
return;
hmax = 1000 * simple_strtoul(p, NULL, 10);
if (hmax <= 0 || hmax <= hmin)
return;
fb_info.monspecs.vfmin = vmin;
fb_info.monspecs.vfmax = vmax;
fb_info.monspecs.hfmin = hmin;
fb_info.monspecs.hfmax = hmax;
}
#endif /* ATAFB_FALCON */
static void __init atafb_setup_user(char *spec)
{
/* Format of user defined video mode is: <xres>;<yres>;<depth>
*/
char *p;
int xres, yres, depth, temp;
p = strsep(&spec, ";");
if (!p || !*p)
return;
xres = simple_strtoul(p, NULL, 10);
p = strsep(&spec, ";");
if (!p || !*p)
return;
yres = simple_strtoul(p, NULL, 10);
p = strsep(&spec, "");
if (!p || !*p)
return;
depth = simple_strtoul(p, NULL, 10);
temp = get_video_mode("user0");
if (temp) {
default_par = temp;
atafb_predefined[default_par - 1].xres = xres;
atafb_predefined[default_par - 1].yres = yres;
atafb_predefined[default_par - 1].bits_per_pixel = depth;
}
}
int __init atafb_setup(char *options)
{
char *this_opt;
int temp;
if (!options || !*options)
return 0;
while ((this_opt = strsep(&options, ",")) != NULL) {
if (!*this_opt)
continue;
if ((temp = get_video_mode(this_opt))) {
default_par = temp;
mode_option = this_opt;
} else if (!strcmp(this_opt, "inverse"))
inverse = 1;
else if (!strncmp(this_opt, "hwscroll_", 9)) {
hwscroll = simple_strtoul(this_opt + 9, NULL, 10);
if (hwscroll < 0)
hwscroll = 0;
if (hwscroll > 200)
hwscroll = 200;
}
#ifdef ATAFB_EXT
else if (!strcmp(this_opt, "mv300")) {
external_bitspercol = 8;
external_card_type = IS_MV300;
} else if (!strncmp(this_opt, "external:", 9))
atafb_setup_ext(this_opt + 9);
#endif
else if (!strncmp(this_opt, "internal:", 9))
atafb_setup_int(this_opt + 9);
#ifdef ATAFB_FALCON
else if (!strncmp(this_opt, "eclock:", 7)) {
fext.f = simple_strtoul(this_opt + 7, NULL, 10);
/* external pixelclock in kHz --> ps */
fext.t = 1000000000 / fext.f;
fext.f *= 1000;
} else if (!strncmp(this_opt, "monitorcap:", 11))
atafb_setup_mcap(this_opt + 11);
#endif
else if (!strcmp(this_opt, "keep"))
DontCalcRes = 1;
else if (!strncmp(this_opt, "R", 1))
atafb_setup_user(this_opt + 1);
}
return 0;
}
int __init atafb_init(void)
{
int pad, detected_mode, error;
unsigned int defmode = 0;
unsigned long mem_req;
#ifndef MODULE
char *option = NULL;
if (fb_get_options("atafb", &option))
return -ENODEV;
atafb_setup(option);
#endif
printk("atafb_init: start\n");
if (!MACH_IS_ATARI)
return -ENODEV;
do {
#ifdef ATAFB_EXT
if (external_addr) {
printk("atafb_init: initializing external hw\n");
fbhw = &ext_switch;
atafb_ops.fb_setcolreg = &ext_setcolreg;
defmode = DEFMODE_EXT;
break;
}
#endif
#ifdef ATAFB_TT
if (ATARIHW_PRESENT(TT_SHIFTER)) {
printk("atafb_init: initializing TT hw\n");
fbhw = &tt_switch;
atafb_ops.fb_setcolreg = &tt_setcolreg;
defmode = DEFMODE_TT;
break;
}
#endif
#ifdef ATAFB_FALCON
if (ATARIHW_PRESENT(VIDEL_SHIFTER)) {
printk("atafb_init: initializing Falcon hw\n");
fbhw = &falcon_switch;
atafb_ops.fb_setcolreg = &falcon_setcolreg;
error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher,
IRQ_TYPE_PRIO,
"framebuffer/modeswitch",
falcon_vbl_switcher);
if (error)
return error;
defmode = DEFMODE_F30;
break;
}
#endif
#ifdef ATAFB_STE
if (ATARIHW_PRESENT(STND_SHIFTER) ||
ATARIHW_PRESENT(EXTD_SHIFTER)) {
printk("atafb_init: initializing ST/E hw\n");
fbhw = &st_switch;
atafb_ops.fb_setcolreg = &stste_setcolreg;
defmode = DEFMODE_STE;
break;
}
fbhw = &st_switch;
atafb_ops.fb_setcolreg = &stste_setcolreg;
printk("Cannot determine video hardware; defaulting to ST(e)\n");
#else /* ATAFB_STE */
/* no default driver included */
/* Nobody will ever see this message :-) */
panic("Cannot initialize video hardware");
#endif
} while (0);
/* Multisync monitor capabilities */
/* Atari-TOS defaults if no boot option present */
if (fb_info.monspecs.hfmin == 0) {
fb_info.monspecs.hfmin = 31000;
fb_info.monspecs.hfmax = 32000;
fb_info.monspecs.vfmin = 58;
fb_info.monspecs.vfmax = 62;
}
detected_mode = fbhw->detect();
check_default_par(detected_mode);
#ifdef ATAFB_EXT
if (!external_addr) {
#endif /* ATAFB_EXT */
mem_req = default_mem_req + ovsc_offset + ovsc_addlen;
mem_req = PAGE_ALIGN(mem_req) + PAGE_SIZE;
screen_base = atari_stram_alloc(mem_req, "atafb");
if (!screen_base)
panic("Cannot allocate screen memory");
memset(screen_base, 0, mem_req);
pad = -(unsigned long)screen_base & (PAGE_SIZE - 1);
screen_base += pad;
real_screen_base = screen_base + ovsc_offset;
screen_len = (mem_req - pad - ovsc_offset) & PAGE_MASK;
st_ovsc_switch();
if (CPU_IS_040_OR_060) {
/* On a '040+, the cache mode of video RAM must be set to
* write-through also for internal video hardware! */
cache_push(virt_to_phys(screen_base), screen_len);
kernel_set_cachemode(screen_base, screen_len,
IOMAP_WRITETHROUGH);
}
printk("atafb: screen_base %p real_screen_base %p screen_len %d\n",
screen_base, real_screen_base, screen_len);
#ifdef ATAFB_EXT
} else {
/* Map the video memory (physical address given) to somewhere
* in the kernel address space.
*/
external_addr = ioremap_writethrough((unsigned long)external_addr,
external_len);
if (external_vgaiobase)
external_vgaiobase =
(unsigned long)ioremap(external_vgaiobase, 0x10000);
screen_base =
real_screen_base = external_addr;
screen_len = external_len & PAGE_MASK;
memset (screen_base, 0, external_len);
}
#endif /* ATAFB_EXT */
// strcpy(fb_info.mode->name, "Atari Builtin ");
fb_info.fbops = &atafb_ops;
// try to set default (detected; requested) var
do_fb_set_var(&atafb_predefined[default_par - 1], 1);
// reads hw state into current par, which may not be sane yet
ata_get_par(&current_par);
fb_info.par = &current_par;
// tries to read from HW which may not be initialized yet
// so set sane var first, then call atafb_set_par
atafb_get_var(&fb_info.var, &fb_info);
#ifdef ATAFB_FALCON
fb_info.pseudo_palette = current_par.hw.falcon.pseudo_palette;
#endif
fb_info.flags = FBINFO_FLAG_DEFAULT;
if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, atafb_modedb,
NUM_TOTAL_MODES, &atafb_modedb[defmode],
fb_info.var.bits_per_pixel)) {
return -EINVAL;
}
fb_videomode_to_modelist(atafb_modedb, NUM_TOTAL_MODES,
&fb_info.modelist);
atafb_set_disp(&fb_info);
fb_alloc_cmap(&(fb_info.cmap), 1 << fb_info.var.bits_per_pixel, 0);
printk("Determined %dx%d, depth %d\n",
fb_info.var.xres, fb_info.var.yres, fb_info.var.bits_per_pixel);
if ((fb_info.var.xres != fb_info.var.xres_virtual) ||
(fb_info.var.yres != fb_info.var.yres_virtual))
printk(" virtual %dx%d\n", fb_info.var.xres_virtual,
fb_info.var.yres_virtual);
if (register_framebuffer(&fb_info) < 0) {
#ifdef ATAFB_EXT
if (external_addr) {
iounmap(external_addr);
external_addr = NULL;
}
if (external_vgaiobase) {
iounmap((void*)external_vgaiobase);
external_vgaiobase = 0;
}
#endif
return -EINVAL;
}
// FIXME: mode needs setting!
//printk("fb%d: %s frame buffer device, using %dK of video memory\n",
// fb_info.node, fb_info.mode->name, screen_len>>10);
printk("fb%d: frame buffer device, using %dK of video memory\n",
fb_info.node, screen_len >> 10);
/* TODO: This driver cannot be unloaded yet */
return 0;
}
module_init(atafb_init);
#ifdef MODULE
MODULE_LICENSE("GPL");
int cleanup_module(void)
{
unregister_framebuffer(&fb_info);
return atafb_deinit();
}
#endif /* MODULE */
View git blame Copy permalink