![Axel Lin](/assets/img/avatar_default.png)
devm_thermal_zone_of_sensor_register can fail, so check it's return value. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
713 lines
18 KiB
C
713 lines
18 KiB
C
/*
|
|
* Copyright (c) 2015 MediaTek Inc.
|
|
* Author: Hanyi Wu <hanyi.wu@mediatek.com>
|
|
* Sascha Hauer <s.hauer@pengutronix.de>
|
|
* Dawei Chien <dawei.chien@mediatek.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/types.h>
|
|
|
|
/* AUXADC Registers */
|
|
#define AUXADC_CON0_V 0x000
|
|
#define AUXADC_CON1_V 0x004
|
|
#define AUXADC_CON1_SET_V 0x008
|
|
#define AUXADC_CON1_CLR_V 0x00c
|
|
#define AUXADC_CON2_V 0x010
|
|
#define AUXADC_DATA(channel) (0x14 + (channel) * 4)
|
|
#define AUXADC_MISC_V 0x094
|
|
|
|
#define AUXADC_CON1_CHANNEL(x) BIT(x)
|
|
|
|
#define APMIXED_SYS_TS_CON1 0x604
|
|
|
|
/* Thermal Controller Registers */
|
|
#define TEMP_MONCTL0 0x000
|
|
#define TEMP_MONCTL1 0x004
|
|
#define TEMP_MONCTL2 0x008
|
|
#define TEMP_MONIDET0 0x014
|
|
#define TEMP_MONIDET1 0x018
|
|
#define TEMP_MSRCTL0 0x038
|
|
#define TEMP_AHBPOLL 0x040
|
|
#define TEMP_AHBTO 0x044
|
|
#define TEMP_ADCPNP0 0x048
|
|
#define TEMP_ADCPNP1 0x04c
|
|
#define TEMP_ADCPNP2 0x050
|
|
#define TEMP_ADCPNP3 0x0b4
|
|
|
|
#define TEMP_ADCMUX 0x054
|
|
#define TEMP_ADCEN 0x060
|
|
#define TEMP_PNPMUXADDR 0x064
|
|
#define TEMP_ADCMUXADDR 0x068
|
|
#define TEMP_ADCENADDR 0x074
|
|
#define TEMP_ADCVALIDADDR 0x078
|
|
#define TEMP_ADCVOLTADDR 0x07c
|
|
#define TEMP_RDCTRL 0x080
|
|
#define TEMP_ADCVALIDMASK 0x084
|
|
#define TEMP_ADCVOLTAGESHIFT 0x088
|
|
#define TEMP_ADCWRITECTRL 0x08c
|
|
#define TEMP_MSR0 0x090
|
|
#define TEMP_MSR1 0x094
|
|
#define TEMP_MSR2 0x098
|
|
#define TEMP_MSR3 0x0B8
|
|
|
|
#define TEMP_SPARE0 0x0f0
|
|
|
|
#define PTPCORESEL 0x400
|
|
|
|
#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff)
|
|
|
|
#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16)
|
|
#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff)
|
|
|
|
#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x)
|
|
|
|
#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE BIT(0)
|
|
#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE BIT(1)
|
|
|
|
#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5)
|
|
#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit)
|
|
|
|
/* MT8173 thermal sensors */
|
|
#define MT8173_TS1 0
|
|
#define MT8173_TS2 1
|
|
#define MT8173_TS3 2
|
|
#define MT8173_TS4 3
|
|
#define MT8173_TSABB 4
|
|
|
|
/* AUXADC channel 11 is used for the temperature sensors */
|
|
#define MT8173_TEMP_AUXADC_CHANNEL 11
|
|
|
|
/* The total number of temperature sensors in the MT8173 */
|
|
#define MT8173_NUM_SENSORS 5
|
|
|
|
/* The number of banks in the MT8173 */
|
|
#define MT8173_NUM_ZONES 4
|
|
|
|
/* The number of sensing points per bank */
|
|
#define MT8173_NUM_SENSORS_PER_ZONE 4
|
|
|
|
/*
|
|
* Layout of the fuses providing the calibration data
|
|
* These macros could be used for both MT8173 and MT2701.
|
|
* MT8173 has five sensors and need five VTS calibration data,
|
|
* and MT2701 has three sensors and need three VTS calibration data.
|
|
*/
|
|
#define MT8173_CALIB_BUF0_VALID BIT(0)
|
|
#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff)
|
|
#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff)
|
|
#define MT8173_CALIB_BUF0_VTS_TS2(x) (((x) >> 8) & 0x1ff)
|
|
#define MT8173_CALIB_BUF1_VTS_TS3(x) (((x) >> 0) & 0x1ff)
|
|
#define MT8173_CALIB_BUF2_VTS_TS4(x) (((x) >> 23) & 0x1ff)
|
|
#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff)
|
|
#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f)
|
|
#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f)
|
|
|
|
/* MT2701 thermal sensors */
|
|
#define MT2701_TS1 0
|
|
#define MT2701_TS2 1
|
|
#define MT2701_TSABB 2
|
|
|
|
/* AUXADC channel 11 is used for the temperature sensors */
|
|
#define MT2701_TEMP_AUXADC_CHANNEL 11
|
|
|
|
/* The total number of temperature sensors in the MT2701 */
|
|
#define MT2701_NUM_SENSORS 3
|
|
|
|
#define THERMAL_NAME "mtk-thermal"
|
|
|
|
/* The number of sensing points per bank */
|
|
#define MT2701_NUM_SENSORS_PER_ZONE 3
|
|
|
|
struct mtk_thermal;
|
|
|
|
struct thermal_bank_cfg {
|
|
unsigned int num_sensors;
|
|
const int *sensors;
|
|
};
|
|
|
|
struct mtk_thermal_bank {
|
|
struct mtk_thermal *mt;
|
|
int id;
|
|
};
|
|
|
|
struct mtk_thermal_data {
|
|
s32 num_banks;
|
|
s32 num_sensors;
|
|
s32 auxadc_channel;
|
|
const int *sensor_mux_values;
|
|
const int *msr;
|
|
const int *adcpnp;
|
|
struct thermal_bank_cfg bank_data[];
|
|
};
|
|
|
|
struct mtk_thermal {
|
|
struct device *dev;
|
|
void __iomem *thermal_base;
|
|
|
|
struct clk *clk_peri_therm;
|
|
struct clk *clk_auxadc;
|
|
/* lock: for getting and putting banks */
|
|
struct mutex lock;
|
|
|
|
/* Calibration values */
|
|
s32 adc_ge;
|
|
s32 degc_cali;
|
|
s32 o_slope;
|
|
s32 vts[MT8173_NUM_SENSORS];
|
|
|
|
const struct mtk_thermal_data *conf;
|
|
struct mtk_thermal_bank banks[];
|
|
};
|
|
|
|
/* MT8173 thermal sensor data */
|
|
const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
|
|
{ MT8173_TS2, MT8173_TS3 },
|
|
{ MT8173_TS2, MT8173_TS4 },
|
|
{ MT8173_TS1, MT8173_TS2, MT8173_TSABB },
|
|
{ MT8173_TS2 },
|
|
};
|
|
|
|
const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
|
|
TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2
|
|
};
|
|
|
|
const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
|
|
TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
|
|
};
|
|
|
|
const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
|
|
|
|
/* MT2701 thermal sensor data */
|
|
const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
|
|
MT2701_TS1, MT2701_TS2, MT2701_TSABB
|
|
};
|
|
|
|
const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
|
|
TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
|
|
};
|
|
|
|
const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
|
|
TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
|
|
};
|
|
|
|
const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
|
|
|
|
/**
|
|
* The MT8173 thermal controller has four banks. Each bank can read up to
|
|
* four temperature sensors simultaneously. The MT8173 has a total of 5
|
|
* temperature sensors. We use each bank to measure a certain area of the
|
|
* SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
|
|
* areas, hence is used in different banks.
|
|
*
|
|
* The thermal core only gets the maximum temperature of all banks, so
|
|
* the bank concept wouldn't be necessary here. However, the SVS (Smart
|
|
* Voltage Scaling) unit makes its decisions based on the same bank
|
|
* data, and this indeed needs the temperatures of the individual banks
|
|
* for making better decisions.
|
|
*/
|
|
static const struct mtk_thermal_data mt8173_thermal_data = {
|
|
.auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
|
|
.num_banks = MT8173_NUM_ZONES,
|
|
.num_sensors = MT8173_NUM_SENSORS,
|
|
.bank_data = {
|
|
{
|
|
.num_sensors = 2,
|
|
.sensors = mt8173_bank_data[0],
|
|
}, {
|
|
.num_sensors = 2,
|
|
.sensors = mt8173_bank_data[1],
|
|
}, {
|
|
.num_sensors = 3,
|
|
.sensors = mt8173_bank_data[2],
|
|
}, {
|
|
.num_sensors = 1,
|
|
.sensors = mt8173_bank_data[3],
|
|
},
|
|
},
|
|
.msr = mt8173_msr,
|
|
.adcpnp = mt8173_adcpnp,
|
|
.sensor_mux_values = mt8173_mux_values,
|
|
};
|
|
|
|
/**
|
|
* The MT2701 thermal controller has one bank, which can read up to
|
|
* three temperature sensors simultaneously. The MT2701 has a total of 3
|
|
* temperature sensors.
|
|
*
|
|
* The thermal core only gets the maximum temperature of this one bank,
|
|
* so the bank concept wouldn't be necessary here. However, the SVS (Smart
|
|
* Voltage Scaling) unit makes its decisions based on the same bank
|
|
* data.
|
|
*/
|
|
static const struct mtk_thermal_data mt2701_thermal_data = {
|
|
.auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
|
|
.num_banks = 1,
|
|
.num_sensors = MT2701_NUM_SENSORS,
|
|
.bank_data = {
|
|
{
|
|
.num_sensors = 3,
|
|
.sensors = mt2701_bank_data,
|
|
},
|
|
},
|
|
.msr = mt2701_msr,
|
|
.adcpnp = mt2701_adcpnp,
|
|
.sensor_mux_values = mt2701_mux_values,
|
|
};
|
|
|
|
/**
|
|
* raw_to_mcelsius - convert a raw ADC value to mcelsius
|
|
* @mt: The thermal controller
|
|
* @raw: raw ADC value
|
|
*
|
|
* This converts the raw ADC value to mcelsius using the SoC specific
|
|
* calibration constants
|
|
*/
|
|
static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw)
|
|
{
|
|
s32 tmp;
|
|
|
|
raw &= 0xfff;
|
|
|
|
tmp = 203450520 << 3;
|
|
tmp /= 165 + mt->o_slope;
|
|
tmp /= 10000 + mt->adc_ge;
|
|
tmp *= raw - mt->vts[sensno] - 3350;
|
|
tmp >>= 3;
|
|
|
|
return mt->degc_cali * 500 - tmp;
|
|
}
|
|
|
|
/**
|
|
* mtk_thermal_get_bank - get bank
|
|
* @bank: The bank
|
|
*
|
|
* The bank registers are banked, we have to select a bank in the
|
|
* PTPCORESEL register to access it.
|
|
*/
|
|
static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
|
|
{
|
|
struct mtk_thermal *mt = bank->mt;
|
|
u32 val;
|
|
|
|
mutex_lock(&mt->lock);
|
|
|
|
val = readl(mt->thermal_base + PTPCORESEL);
|
|
val &= ~0xf;
|
|
val |= bank->id;
|
|
writel(val, mt->thermal_base + PTPCORESEL);
|
|
}
|
|
|
|
/**
|
|
* mtk_thermal_put_bank - release bank
|
|
* @bank: The bank
|
|
*
|
|
* release a bank previously taken with mtk_thermal_get_bank,
|
|
*/
|
|
static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
|
|
{
|
|
struct mtk_thermal *mt = bank->mt;
|
|
|
|
mutex_unlock(&mt->lock);
|
|
}
|
|
|
|
/**
|
|
* mtk_thermal_bank_temperature - get the temperature of a bank
|
|
* @bank: The bank
|
|
*
|
|
* The temperature of a bank is considered the maximum temperature of
|
|
* the sensors associated to the bank.
|
|
*/
|
|
static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
|
|
{
|
|
struct mtk_thermal *mt = bank->mt;
|
|
const struct mtk_thermal_data *conf = mt->conf;
|
|
int i, temp = INT_MIN, max = INT_MIN;
|
|
u32 raw;
|
|
|
|
for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
|
|
raw = readl(mt->thermal_base + conf->msr[i]);
|
|
|
|
temp = raw_to_mcelsius(mt,
|
|
conf->bank_data[bank->id].sensors[i],
|
|
raw);
|
|
|
|
/*
|
|
* The first read of a sensor often contains very high bogus
|
|
* temperature value. Filter these out so that the system does
|
|
* not immediately shut down.
|
|
*/
|
|
if (temp > 200000)
|
|
temp = 0;
|
|
|
|
if (temp > max)
|
|
max = temp;
|
|
}
|
|
|
|
return max;
|
|
}
|
|
|
|
static int mtk_read_temp(void *data, int *temperature)
|
|
{
|
|
struct mtk_thermal *mt = data;
|
|
int i;
|
|
int tempmax = INT_MIN;
|
|
|
|
for (i = 0; i < mt->conf->num_banks; i++) {
|
|
struct mtk_thermal_bank *bank = &mt->banks[i];
|
|
|
|
mtk_thermal_get_bank(bank);
|
|
|
|
tempmax = max(tempmax, mtk_thermal_bank_temperature(bank));
|
|
|
|
mtk_thermal_put_bank(bank);
|
|
}
|
|
|
|
*temperature = tempmax;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
|
|
.get_temp = mtk_read_temp,
|
|
};
|
|
|
|
static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
|
|
u32 apmixed_phys_base, u32 auxadc_phys_base)
|
|
{
|
|
struct mtk_thermal_bank *bank = &mt->banks[num];
|
|
const struct mtk_thermal_data *conf = mt->conf;
|
|
int i;
|
|
|
|
bank->id = num;
|
|
bank->mt = mt;
|
|
|
|
mtk_thermal_get_bank(bank);
|
|
|
|
/* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
|
|
writel(TEMP_MONCTL1_PERIOD_UNIT(12), mt->thermal_base + TEMP_MONCTL1);
|
|
|
|
/*
|
|
* filt interval is 1 * 46.540us = 46.54us,
|
|
* sen interval is 429 * 46.540us = 19.96ms
|
|
*/
|
|
writel(TEMP_MONCTL2_FILTER_INTERVAL(1) |
|
|
TEMP_MONCTL2_SENSOR_INTERVAL(429),
|
|
mt->thermal_base + TEMP_MONCTL2);
|
|
|
|
/* poll is set to 10u */
|
|
writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
|
|
mt->thermal_base + TEMP_AHBPOLL);
|
|
|
|
/* temperature sampling control, 1 sample */
|
|
writel(0x0, mt->thermal_base + TEMP_MSRCTL0);
|
|
|
|
/* exceed this polling time, IRQ would be inserted */
|
|
writel(0xffffffff, mt->thermal_base + TEMP_AHBTO);
|
|
|
|
/* number of interrupts per event, 1 is enough */
|
|
writel(0x0, mt->thermal_base + TEMP_MONIDET0);
|
|
writel(0x0, mt->thermal_base + TEMP_MONIDET1);
|
|
|
|
/*
|
|
* The MT8173 thermal controller does not have its own ADC. Instead it
|
|
* uses AHB bus accesses to control the AUXADC. To do this the thermal
|
|
* controller has to be programmed with the physical addresses of the
|
|
* AUXADC registers and with the various bit positions in the AUXADC.
|
|
* Also the thermal controller controls a mux in the APMIXEDSYS register
|
|
* space.
|
|
*/
|
|
|
|
/*
|
|
* this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
|
|
* automatically by hw
|
|
*/
|
|
writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCMUX);
|
|
|
|
/* AHB address for auxadc mux selection */
|
|
writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
|
|
mt->thermal_base + TEMP_ADCMUXADDR);
|
|
|
|
/* AHB address for pnp sensor mux selection */
|
|
writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
|
|
mt->thermal_base + TEMP_PNPMUXADDR);
|
|
|
|
/* AHB value for auxadc enable */
|
|
writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCEN);
|
|
|
|
/* AHB address for auxadc enable (channel 0 immediate mode selected) */
|
|
writel(auxadc_phys_base + AUXADC_CON1_SET_V,
|
|
mt->thermal_base + TEMP_ADCENADDR);
|
|
|
|
/* AHB address for auxadc valid bit */
|
|
writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
|
|
mt->thermal_base + TEMP_ADCVALIDADDR);
|
|
|
|
/* AHB address for auxadc voltage output */
|
|
writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
|
|
mt->thermal_base + TEMP_ADCVOLTADDR);
|
|
|
|
/* read valid & voltage are at the same register */
|
|
writel(0x0, mt->thermal_base + TEMP_RDCTRL);
|
|
|
|
/* indicate where the valid bit is */
|
|
writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
|
|
mt->thermal_base + TEMP_ADCVALIDMASK);
|
|
|
|
/* no shift */
|
|
writel(0x0, mt->thermal_base + TEMP_ADCVOLTAGESHIFT);
|
|
|
|
/* enable auxadc mux write transaction */
|
|
writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
|
|
mt->thermal_base + TEMP_ADCWRITECTRL);
|
|
|
|
for (i = 0; i < conf->bank_data[num].num_sensors; i++)
|
|
writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
|
|
mt->thermal_base + conf->adcpnp[i]);
|
|
|
|
writel((1 << conf->bank_data[num].num_sensors) - 1,
|
|
mt->thermal_base + TEMP_MONCTL0);
|
|
|
|
writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
|
|
TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
|
|
mt->thermal_base + TEMP_ADCWRITECTRL);
|
|
|
|
mtk_thermal_put_bank(bank);
|
|
}
|
|
|
|
static u64 of_get_phys_base(struct device_node *np)
|
|
{
|
|
u64 size64;
|
|
const __be32 *regaddr_p;
|
|
|
|
regaddr_p = of_get_address(np, 0, &size64, NULL);
|
|
if (!regaddr_p)
|
|
return OF_BAD_ADDR;
|
|
|
|
return of_translate_address(np, regaddr_p);
|
|
}
|
|
|
|
static int mtk_thermal_get_calibration_data(struct device *dev,
|
|
struct mtk_thermal *mt)
|
|
{
|
|
struct nvmem_cell *cell;
|
|
u32 *buf;
|
|
size_t len;
|
|
int i, ret = 0;
|
|
|
|
/* Start with default values */
|
|
mt->adc_ge = 512;
|
|
for (i = 0; i < mt->conf->num_sensors; i++)
|
|
mt->vts[i] = 260;
|
|
mt->degc_cali = 40;
|
|
mt->o_slope = 0;
|
|
|
|
cell = nvmem_cell_get(dev, "calibration-data");
|
|
if (IS_ERR(cell)) {
|
|
if (PTR_ERR(cell) == -EPROBE_DEFER)
|
|
return PTR_ERR(cell);
|
|
return 0;
|
|
}
|
|
|
|
buf = (u32 *)nvmem_cell_read(cell, &len);
|
|
|
|
nvmem_cell_put(cell);
|
|
|
|
if (IS_ERR(buf))
|
|
return PTR_ERR(buf);
|
|
|
|
if (len < 3 * sizeof(u32)) {
|
|
dev_warn(dev, "invalid calibration data\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (buf[0] & MT8173_CALIB_BUF0_VALID) {
|
|
mt->adc_ge = MT8173_CALIB_BUF1_ADC_GE(buf[1]);
|
|
mt->vts[MT8173_TS1] = MT8173_CALIB_BUF0_VTS_TS1(buf[0]);
|
|
mt->vts[MT8173_TS2] = MT8173_CALIB_BUF0_VTS_TS2(buf[0]);
|
|
mt->vts[MT8173_TS3] = MT8173_CALIB_BUF1_VTS_TS3(buf[1]);
|
|
mt->vts[MT8173_TS4] = MT8173_CALIB_BUF2_VTS_TS4(buf[2]);
|
|
mt->vts[MT8173_TSABB] = MT8173_CALIB_BUF2_VTS_TSABB(buf[2]);
|
|
mt->degc_cali = MT8173_CALIB_BUF0_DEGC_CALI(buf[0]);
|
|
mt->o_slope = MT8173_CALIB_BUF0_O_SLOPE(buf[0]);
|
|
} else {
|
|
dev_info(dev, "Device not calibrated, using default calibration values\n");
|
|
}
|
|
|
|
out:
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id mtk_thermal_of_match[] = {
|
|
{
|
|
.compatible = "mediatek,mt8173-thermal",
|
|
.data = (void *)&mt8173_thermal_data,
|
|
},
|
|
{
|
|
.compatible = "mediatek,mt2701-thermal",
|
|
.data = (void *)&mt2701_thermal_data,
|
|
}, {
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
|
|
|
|
static int mtk_thermal_probe(struct platform_device *pdev)
|
|
{
|
|
int ret, i;
|
|
struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
|
|
struct mtk_thermal *mt;
|
|
struct resource *res;
|
|
const struct of_device_id *of_id;
|
|
u64 auxadc_phys_base, apmixed_phys_base;
|
|
struct thermal_zone_device *tzdev;
|
|
|
|
mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
|
|
if (!mt)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_device(mtk_thermal_of_match, &pdev->dev);
|
|
if (of_id)
|
|
mt->conf = (const struct mtk_thermal_data *)of_id->data;
|
|
|
|
mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
|
|
if (IS_ERR(mt->clk_peri_therm))
|
|
return PTR_ERR(mt->clk_peri_therm);
|
|
|
|
mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
|
|
if (IS_ERR(mt->clk_auxadc))
|
|
return PTR_ERR(mt->clk_auxadc);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
mt->thermal_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(mt->thermal_base))
|
|
return PTR_ERR(mt->thermal_base);
|
|
|
|
ret = mtk_thermal_get_calibration_data(&pdev->dev, mt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_init(&mt->lock);
|
|
|
|
mt->dev = &pdev->dev;
|
|
|
|
auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);
|
|
if (!auxadc) {
|
|
dev_err(&pdev->dev, "missing auxadc node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
auxadc_phys_base = of_get_phys_base(auxadc);
|
|
|
|
of_node_put(auxadc);
|
|
|
|
if (auxadc_phys_base == OF_BAD_ADDR) {
|
|
dev_err(&pdev->dev, "Can't get auxadc phys address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0);
|
|
if (!apmixedsys) {
|
|
dev_err(&pdev->dev, "missing apmixedsys node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
apmixed_phys_base = of_get_phys_base(apmixedsys);
|
|
|
|
of_node_put(apmixedsys);
|
|
|
|
if (apmixed_phys_base == OF_BAD_ADDR) {
|
|
dev_err(&pdev->dev, "Can't get auxadc phys address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = clk_prepare_enable(mt->clk_auxadc);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = device_reset(&pdev->dev);
|
|
if (ret)
|
|
goto err_disable_clk_auxadc;
|
|
|
|
ret = clk_prepare_enable(mt->clk_peri_therm);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
|
|
goto err_disable_clk_auxadc;
|
|
}
|
|
|
|
for (i = 0; i < mt->conf->num_banks; i++)
|
|
mtk_thermal_init_bank(mt, i, apmixed_phys_base,
|
|
auxadc_phys_base);
|
|
|
|
platform_set_drvdata(pdev, mt);
|
|
|
|
tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
|
|
&mtk_thermal_ops);
|
|
if (IS_ERR(tzdev)) {
|
|
ret = PTR_ERR(tzdev);
|
|
goto err_disable_clk_peri_therm;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_clk_peri_therm:
|
|
clk_disable_unprepare(mt->clk_peri_therm);
|
|
err_disable_clk_auxadc:
|
|
clk_disable_unprepare(mt->clk_auxadc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mtk_thermal_remove(struct platform_device *pdev)
|
|
{
|
|
struct mtk_thermal *mt = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(mt->clk_peri_therm);
|
|
clk_disable_unprepare(mt->clk_auxadc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mtk_thermal_driver = {
|
|
.probe = mtk_thermal_probe,
|
|
.remove = mtk_thermal_remove,
|
|
.driver = {
|
|
.name = THERMAL_NAME,
|
|
.of_match_table = mtk_thermal_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mtk_thermal_driver);
|
|
|
|
MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
|
|
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
|
|
MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
|
|
MODULE_DESCRIPTION("Mediatek thermal driver");
|
|
MODULE_LICENSE("GPL v2");
|