![Sergey Senozhatsky](/assets/img/avatar_default.png)
debug_stat sysfs is read-only and represents various debugging data that zram developers may need. This file is not meant to be used by anyone else: its content is not documented and will change any time w/o any notice. Therefore, the output of debug_stat file contains a version string. To avoid any confusion, we will increase the version number every time we modify the output. At the moment this file exports only one value -- the number of re-compressions, IOW, the number of times compression fast path has failed. This stat is temporary any will be useful in case if any per-cpu compression streams regressions will be reported. Link: http://lkml.kernel.org/r/20160513230834.GB26763@bbox Link: http://lkml.kernel.org/r/20160511134553.12655-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
236 lines
8.4 KiB
Plaintext
236 lines
8.4 KiB
Plaintext
zram: Compressed RAM based block devices
|
|
----------------------------------------
|
|
|
|
* Introduction
|
|
|
|
The zram module creates RAM based block devices named /dev/zram<id>
|
|
(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
|
|
in memory itself. These disks allow very fast I/O and compression provides
|
|
good amounts of memory savings. Some of the usecases include /tmp storage,
|
|
use as swap disks, various caches under /var and maybe many more :)
|
|
|
|
Statistics for individual zram devices are exported through sysfs nodes at
|
|
/sys/block/zram<id>/
|
|
|
|
* Usage
|
|
|
|
There are several ways to configure and manage zram device(-s):
|
|
a) using zram and zram_control sysfs attributes
|
|
b) using zramctl utility, provided by util-linux (util-linux@vger.kernel.org).
|
|
|
|
In this document we will describe only 'manual' zram configuration steps,
|
|
IOW, zram and zram_control sysfs attributes.
|
|
|
|
In order to get a better idea about zramctl please consult util-linux
|
|
documentation, zramctl man-page or `zramctl --help'. Please be informed
|
|
that zram maintainers do not develop/maintain util-linux or zramctl, should
|
|
you have any questions please contact util-linux@vger.kernel.org
|
|
|
|
Following shows a typical sequence of steps for using zram.
|
|
|
|
WARNING
|
|
=======
|
|
For the sake of simplicity we skip error checking parts in most of the
|
|
examples below. However, it is your sole responsibility to handle errors.
|
|
|
|
zram sysfs attributes always return negative values in case of errors.
|
|
The list of possible return codes:
|
|
-EBUSY -- an attempt to modify an attribute that cannot be changed once
|
|
the device has been initialised. Please reset device first;
|
|
-ENOMEM -- zram was not able to allocate enough memory to fulfil your
|
|
needs;
|
|
-EINVAL -- invalid input has been provided.
|
|
|
|
If you use 'echo', the returned value that is changed by 'echo' utility,
|
|
and, in general case, something like:
|
|
|
|
echo 3 > /sys/block/zram0/max_comp_streams
|
|
if [ $? -ne 0 ];
|
|
handle_error
|
|
fi
|
|
|
|
should suffice.
|
|
|
|
1) Load Module:
|
|
modprobe zram num_devices=4
|
|
This creates 4 devices: /dev/zram{0,1,2,3}
|
|
|
|
num_devices parameter is optional and tells zram how many devices should be
|
|
pre-created. Default: 1.
|
|
|
|
2) Set max number of compression streams
|
|
Regardless the value passed to this attribute, ZRAM will always
|
|
allocate multiple compression streams - one per online CPUs - thus
|
|
allowing several concurrent compression operations. The number of
|
|
allocated compression streams goes down when some of the CPUs
|
|
become offline. There is no single-compression-stream mode anymore,
|
|
unless you are running a UP system or has only 1 CPU online.
|
|
|
|
To find out how many streams are currently available:
|
|
cat /sys/block/zram0/max_comp_streams
|
|
|
|
3) Select compression algorithm
|
|
Using comp_algorithm device attribute one can see available and
|
|
currently selected (shown in square brackets) compression algorithms,
|
|
change selected compression algorithm (once the device is initialised
|
|
there is no way to change compression algorithm).
|
|
|
|
Examples:
|
|
#show supported compression algorithms
|
|
cat /sys/block/zram0/comp_algorithm
|
|
lzo [lz4]
|
|
|
|
#select lzo compression algorithm
|
|
echo lzo > /sys/block/zram0/comp_algorithm
|
|
|
|
4) Set Disksize
|
|
Set disk size by writing the value to sysfs node 'disksize'.
|
|
The value can be either in bytes or you can use mem suffixes.
|
|
Examples:
|
|
# Initialize /dev/zram0 with 50MB disksize
|
|
echo $((50*1024*1024)) > /sys/block/zram0/disksize
|
|
|
|
# Using mem suffixes
|
|
echo 256K > /sys/block/zram0/disksize
|
|
echo 512M > /sys/block/zram0/disksize
|
|
echo 1G > /sys/block/zram0/disksize
|
|
|
|
Note:
|
|
There is little point creating a zram of greater than twice the size of memory
|
|
since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the
|
|
size of the disk when not in use so a huge zram is wasteful.
|
|
|
|
5) Set memory limit: Optional
|
|
Set memory limit by writing the value to sysfs node 'mem_limit'.
|
|
The value can be either in bytes or you can use mem suffixes.
|
|
In addition, you could change the value in runtime.
|
|
Examples:
|
|
# limit /dev/zram0 with 50MB memory
|
|
echo $((50*1024*1024)) > /sys/block/zram0/mem_limit
|
|
|
|
# Using mem suffixes
|
|
echo 256K > /sys/block/zram0/mem_limit
|
|
echo 512M > /sys/block/zram0/mem_limit
|
|
echo 1G > /sys/block/zram0/mem_limit
|
|
|
|
# To disable memory limit
|
|
echo 0 > /sys/block/zram0/mem_limit
|
|
|
|
6) Activate:
|
|
mkswap /dev/zram0
|
|
swapon /dev/zram0
|
|
|
|
mkfs.ext4 /dev/zram1
|
|
mount /dev/zram1 /tmp
|
|
|
|
7) Add/remove zram devices
|
|
|
|
zram provides a control interface, which enables dynamic (on-demand) device
|
|
addition and removal.
|
|
|
|
In order to add a new /dev/zramX device, perform read operation on hot_add
|
|
attribute. This will return either new device's device id (meaning that you
|
|
can use /dev/zram<id>) or error code.
|
|
|
|
Example:
|
|
cat /sys/class/zram-control/hot_add
|
|
1
|
|
|
|
To remove the existing /dev/zramX device (where X is a device id)
|
|
execute
|
|
echo X > /sys/class/zram-control/hot_remove
|
|
|
|
8) Stats:
|
|
Per-device statistics are exported as various nodes under /sys/block/zram<id>/
|
|
|
|
A brief description of exported device attributes. For more details please
|
|
read Documentation/ABI/testing/sysfs-block-zram.
|
|
|
|
Name access description
|
|
---- ------ -----------
|
|
disksize RW show and set the device's disk size
|
|
initstate RO shows the initialization state of the device
|
|
reset WO trigger device reset
|
|
num_reads RO the number of reads
|
|
failed_reads RO the number of failed reads
|
|
num_write RO the number of writes
|
|
failed_writes RO the number of failed writes
|
|
invalid_io RO the number of non-page-size-aligned I/O requests
|
|
max_comp_streams RW the number of possible concurrent compress operations
|
|
comp_algorithm RW show and change the compression algorithm
|
|
notify_free RO the number of notifications to free pages (either
|
|
slot free notifications or REQ_DISCARD requests)
|
|
zero_pages RO the number of zero filled pages written to this disk
|
|
orig_data_size RO uncompressed size of data stored in this disk
|
|
compr_data_size RO compressed size of data stored in this disk
|
|
mem_used_total RO the amount of memory allocated for this disk
|
|
mem_used_max RW the maximum amount of memory zram have consumed to
|
|
store the data (to reset this counter to the actual
|
|
current value, write 1 to this attribute)
|
|
mem_limit RW the maximum amount of memory ZRAM can use to store
|
|
the compressed data
|
|
pages_compacted RO the number of pages freed during compaction
|
|
(available only via zram<id>/mm_stat node)
|
|
compact WO trigger memory compaction
|
|
debug_stat RO this file is used for zram debugging purposes
|
|
|
|
WARNING
|
|
=======
|
|
per-stat sysfs attributes are considered to be deprecated.
|
|
The basic strategy is:
|
|
-- the existing RW nodes will be downgraded to WO nodes (in linux 4.11)
|
|
-- deprecated RO sysfs nodes will eventually be removed (in linux 4.11)
|
|
|
|
The list of deprecated attributes can be found here:
|
|
Documentation/ABI/obsolete/sysfs-block-zram
|
|
|
|
Basically, every attribute that has its own read accessible sysfs node
|
|
(e.g. num_reads) *AND* is accessible via one of the stat files (zram<id>/stat
|
|
or zram<id>/io_stat or zram<id>/mm_stat) is considered to be deprecated.
|
|
|
|
User space is advised to use the following files to read the device statistics.
|
|
|
|
File /sys/block/zram<id>/stat
|
|
|
|
Represents block layer statistics. Read Documentation/block/stat.txt for
|
|
details.
|
|
|
|
File /sys/block/zram<id>/io_stat
|
|
|
|
The stat file represents device's I/O statistics not accounted by block
|
|
layer and, thus, not available in zram<id>/stat file. It consists of a
|
|
single line of text and contains the following stats separated by
|
|
whitespace:
|
|
failed_reads
|
|
failed_writes
|
|
invalid_io
|
|
notify_free
|
|
|
|
File /sys/block/zram<id>/mm_stat
|
|
|
|
The stat file represents device's mm statistics. It consists of a single
|
|
line of text and contains the following stats separated by whitespace:
|
|
orig_data_size
|
|
compr_data_size
|
|
mem_used_total
|
|
mem_limit
|
|
mem_used_max
|
|
zero_pages
|
|
num_migrated
|
|
|
|
9) Deactivate:
|
|
swapoff /dev/zram0
|
|
umount /dev/zram1
|
|
|
|
10) Reset:
|
|
Write any positive value to 'reset' sysfs node
|
|
echo 1 > /sys/block/zram0/reset
|
|
echo 1 > /sys/block/zram1/reset
|
|
|
|
This frees all the memory allocated for the given device and
|
|
resets the disksize to zero. You must set the disksize again
|
|
before reusing the device.
|
|
|
|
Nitin Gupta
|
|
ngupta@vflare.org
|