![Rafael J. Wysocki](/assets/img/avatar_default.png)
* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
1259 lines
36 KiB
C
1259 lines
36 KiB
C
/*
|
||
* xHCI host controller driver
|
||
*
|
||
* Copyright (C) 2008 Intel Corp.
|
||
*
|
||
* Author: Sarah Sharp
|
||
* Some code borrowed from the Linux EHCI driver.
|
||
*
|
||
* This program is free software; you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License version 2 as
|
||
* published by the Free Software Foundation.
|
||
*
|
||
* This program is distributed in the hope that it will be useful, but
|
||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||
* for more details.
|
||
*
|
||
* You should have received a copy of the GNU General Public License
|
||
* along with this program; if not, write to the Free Software Foundation,
|
||
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||
*/
|
||
|
||
|
||
#include <linux/slab.h>
|
||
#include <asm/unaligned.h>
|
||
|
||
#include "xhci.h"
|
||
#include "xhci-trace.h"
|
||
|
||
#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
|
||
#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
|
||
PORT_RC | PORT_PLC | PORT_PE)
|
||
|
||
/* USB 3.0 BOS descriptor and a capability descriptor, combined */
|
||
static u8 usb_bos_descriptor [] = {
|
||
USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */
|
||
USB_DT_BOS, /* __u8 bDescriptorType */
|
||
0x0F, 0x00, /* __le16 wTotalLength, 15 bytes */
|
||
0x1, /* __u8 bNumDeviceCaps */
|
||
/* First device capability */
|
||
USB_DT_USB_SS_CAP_SIZE, /* __u8 bLength, 10 bytes */
|
||
USB_DT_DEVICE_CAPABILITY, /* Device Capability */
|
||
USB_SS_CAP_TYPE, /* bDevCapabilityType, SUPERSPEED_USB */
|
||
0x00, /* bmAttributes, LTM off by default */
|
||
USB_5GBPS_OPERATION, 0x00, /* wSpeedsSupported, 5Gbps only */
|
||
0x03, /* bFunctionalitySupport,
|
||
USB 3.0 speed only */
|
||
0x00, /* bU1DevExitLat, set later. */
|
||
0x00, 0x00 /* __le16 bU2DevExitLat, set later. */
|
||
};
|
||
|
||
|
||
static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
|
||
struct usb_hub_descriptor *desc, int ports)
|
||
{
|
||
u16 temp;
|
||
|
||
desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
|
||
desc->bHubContrCurrent = 0;
|
||
|
||
desc->bNbrPorts = ports;
|
||
temp = 0;
|
||
/* Bits 1:0 - support per-port power switching, or power always on */
|
||
if (HCC_PPC(xhci->hcc_params))
|
||
temp |= HUB_CHAR_INDV_PORT_LPSM;
|
||
else
|
||
temp |= HUB_CHAR_NO_LPSM;
|
||
/* Bit 2 - root hubs are not part of a compound device */
|
||
/* Bits 4:3 - individual port over current protection */
|
||
temp |= HUB_CHAR_INDV_PORT_OCPM;
|
||
/* Bits 6:5 - no TTs in root ports */
|
||
/* Bit 7 - no port indicators */
|
||
desc->wHubCharacteristics = cpu_to_le16(temp);
|
||
}
|
||
|
||
/* Fill in the USB 2.0 roothub descriptor */
|
||
static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
|
||
struct usb_hub_descriptor *desc)
|
||
{
|
||
int ports;
|
||
u16 temp;
|
||
__u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
|
||
u32 portsc;
|
||
unsigned int i;
|
||
|
||
ports = xhci->num_usb2_ports;
|
||
|
||
xhci_common_hub_descriptor(xhci, desc, ports);
|
||
desc->bDescriptorType = USB_DT_HUB;
|
||
temp = 1 + (ports / 8);
|
||
desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
|
||
|
||
/* The Device Removable bits are reported on a byte granularity.
|
||
* If the port doesn't exist within that byte, the bit is set to 0.
|
||
*/
|
||
memset(port_removable, 0, sizeof(port_removable));
|
||
for (i = 0; i < ports; i++) {
|
||
portsc = readl(xhci->usb2_ports[i]);
|
||
/* If a device is removable, PORTSC reports a 0, same as in the
|
||
* hub descriptor DeviceRemovable bits.
|
||
*/
|
||
if (portsc & PORT_DEV_REMOVE)
|
||
/* This math is hairy because bit 0 of DeviceRemovable
|
||
* is reserved, and bit 1 is for port 1, etc.
|
||
*/
|
||
port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
|
||
}
|
||
|
||
/* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
|
||
* ports on it. The USB 2.0 specification says that there are two
|
||
* variable length fields at the end of the hub descriptor:
|
||
* DeviceRemovable and PortPwrCtrlMask. But since we can have less than
|
||
* USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
|
||
* to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to
|
||
* 0xFF, so we initialize the both arrays (DeviceRemovable and
|
||
* PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each
|
||
* set of ports that actually exist.
|
||
*/
|
||
memset(desc->u.hs.DeviceRemovable, 0xff,
|
||
sizeof(desc->u.hs.DeviceRemovable));
|
||
memset(desc->u.hs.PortPwrCtrlMask, 0xff,
|
||
sizeof(desc->u.hs.PortPwrCtrlMask));
|
||
|
||
for (i = 0; i < (ports + 1 + 7) / 8; i++)
|
||
memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
|
||
sizeof(__u8));
|
||
}
|
||
|
||
/* Fill in the USB 3.0 roothub descriptor */
|
||
static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
|
||
struct usb_hub_descriptor *desc)
|
||
{
|
||
int ports;
|
||
u16 port_removable;
|
||
u32 portsc;
|
||
unsigned int i;
|
||
|
||
ports = xhci->num_usb3_ports;
|
||
xhci_common_hub_descriptor(xhci, desc, ports);
|
||
desc->bDescriptorType = USB_DT_SS_HUB;
|
||
desc->bDescLength = USB_DT_SS_HUB_SIZE;
|
||
|
||
/* header decode latency should be zero for roothubs,
|
||
* see section 4.23.5.2.
|
||
*/
|
||
desc->u.ss.bHubHdrDecLat = 0;
|
||
desc->u.ss.wHubDelay = 0;
|
||
|
||
port_removable = 0;
|
||
/* bit 0 is reserved, bit 1 is for port 1, etc. */
|
||
for (i = 0; i < ports; i++) {
|
||
portsc = readl(xhci->usb3_ports[i]);
|
||
if (portsc & PORT_DEV_REMOVE)
|
||
port_removable |= 1 << (i + 1);
|
||
}
|
||
|
||
desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
|
||
}
|
||
|
||
static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
|
||
struct usb_hub_descriptor *desc)
|
||
{
|
||
|
||
if (hcd->speed == HCD_USB3)
|
||
xhci_usb3_hub_descriptor(hcd, xhci, desc);
|
||
else
|
||
xhci_usb2_hub_descriptor(hcd, xhci, desc);
|
||
|
||
}
|
||
|
||
static unsigned int xhci_port_speed(unsigned int port_status)
|
||
{
|
||
if (DEV_LOWSPEED(port_status))
|
||
return USB_PORT_STAT_LOW_SPEED;
|
||
if (DEV_HIGHSPEED(port_status))
|
||
return USB_PORT_STAT_HIGH_SPEED;
|
||
/*
|
||
* FIXME: Yes, we should check for full speed, but the core uses that as
|
||
* a default in portspeed() in usb/core/hub.c (which is the only place
|
||
* USB_PORT_STAT_*_SPEED is used).
|
||
*/
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* These bits are Read Only (RO) and should be saved and written to the
|
||
* registers: 0, 3, 10:13, 30
|
||
* connect status, over-current status, port speed, and device removable.
|
||
* connect status and port speed are also sticky - meaning they're in
|
||
* the AUX well and they aren't changed by a hot, warm, or cold reset.
|
||
*/
|
||
#define XHCI_PORT_RO ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
|
||
/*
|
||
* These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
|
||
* bits 5:8, 9, 14:15, 25:27
|
||
* link state, port power, port indicator state, "wake on" enable state
|
||
*/
|
||
#define XHCI_PORT_RWS ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
|
||
/*
|
||
* These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
|
||
* bit 4 (port reset)
|
||
*/
|
||
#define XHCI_PORT_RW1S ((1<<4))
|
||
/*
|
||
* These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
|
||
* bits 1, 17, 18, 19, 20, 21, 22, 23
|
||
* port enable/disable, and
|
||
* change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
|
||
* over-current, reset, link state, and L1 change
|
||
*/
|
||
#define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
|
||
/*
|
||
* Bit 16 is RW, and writing a '1' to it causes the link state control to be
|
||
* latched in
|
||
*/
|
||
#define XHCI_PORT_RW ((1<<16))
|
||
/*
|
||
* These bits are Reserved Zero (RsvdZ) and zero should be written to them:
|
||
* bits 2, 24, 28:31
|
||
*/
|
||
#define XHCI_PORT_RZ ((1<<2) | (1<<24) | (0xf<<28))
|
||
|
||
/*
|
||
* Given a port state, this function returns a value that would result in the
|
||
* port being in the same state, if the value was written to the port status
|
||
* control register.
|
||
* Save Read Only (RO) bits and save read/write bits where
|
||
* writing a 0 clears the bit and writing a 1 sets the bit (RWS).
|
||
* For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
|
||
*/
|
||
u32 xhci_port_state_to_neutral(u32 state)
|
||
{
|
||
/* Save read-only status and port state */
|
||
return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
|
||
}
|
||
|
||
/*
|
||
* find slot id based on port number.
|
||
* @port: The one-based port number from one of the two split roothubs.
|
||
*/
|
||
int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
|
||
u16 port)
|
||
{
|
||
int slot_id;
|
||
int i;
|
||
enum usb_device_speed speed;
|
||
|
||
slot_id = 0;
|
||
for (i = 0; i < MAX_HC_SLOTS; i++) {
|
||
if (!xhci->devs[i])
|
||
continue;
|
||
speed = xhci->devs[i]->udev->speed;
|
||
if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
|
||
&& xhci->devs[i]->fake_port == port) {
|
||
slot_id = i;
|
||
break;
|
||
}
|
||
}
|
||
|
||
return slot_id;
|
||
}
|
||
|
||
/*
|
||
* Stop device
|
||
* It issues stop endpoint command for EP 0 to 30. And wait the last command
|
||
* to complete.
|
||
* suspend will set to 1, if suspend bit need to set in command.
|
||
*/
|
||
static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
|
||
{
|
||
struct xhci_virt_device *virt_dev;
|
||
struct xhci_command *cmd;
|
||
unsigned long flags;
|
||
int ret;
|
||
int i;
|
||
|
||
ret = 0;
|
||
virt_dev = xhci->devs[slot_id];
|
||
cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
|
||
if (!cmd) {
|
||
xhci_dbg(xhci, "Couldn't allocate command structure.\n");
|
||
return -ENOMEM;
|
||
}
|
||
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
for (i = LAST_EP_INDEX; i > 0; i--) {
|
||
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
|
||
struct xhci_command *command;
|
||
command = xhci_alloc_command(xhci, false, false,
|
||
GFP_NOWAIT);
|
||
if (!command) {
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
xhci_free_command(xhci, cmd);
|
||
return -ENOMEM;
|
||
|
||
}
|
||
xhci_queue_stop_endpoint(xhci, command, slot_id, i,
|
||
suspend);
|
||
}
|
||
}
|
||
xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend);
|
||
xhci_ring_cmd_db(xhci);
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
|
||
/* Wait for last stop endpoint command to finish */
|
||
wait_for_completion(cmd->completion);
|
||
|
||
if (cmd->status == COMP_CMD_ABORT || cmd->status == COMP_CMD_STOP) {
|
||
xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
|
||
ret = -ETIME;
|
||
}
|
||
xhci_free_command(xhci, cmd);
|
||
return ret;
|
||
}
|
||
|
||
/*
|
||
* Ring device, it rings the all doorbells unconditionally.
|
||
*/
|
||
void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
|
||
{
|
||
int i, s;
|
||
struct xhci_virt_ep *ep;
|
||
|
||
for (i = 0; i < LAST_EP_INDEX + 1; i++) {
|
||
ep = &xhci->devs[slot_id]->eps[i];
|
||
|
||
if (ep->ep_state & EP_HAS_STREAMS) {
|
||
for (s = 1; s < ep->stream_info->num_streams; s++)
|
||
xhci_ring_ep_doorbell(xhci, slot_id, i, s);
|
||
} else if (ep->ring && ep->ring->dequeue) {
|
||
xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
|
||
}
|
||
}
|
||
|
||
return;
|
||
}
|
||
|
||
static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
|
||
u16 wIndex, __le32 __iomem *addr, u32 port_status)
|
||
{
|
||
/* Don't allow the USB core to disable SuperSpeed ports. */
|
||
if (hcd->speed == HCD_USB3) {
|
||
xhci_dbg(xhci, "Ignoring request to disable "
|
||
"SuperSpeed port.\n");
|
||
return;
|
||
}
|
||
|
||
/* Write 1 to disable the port */
|
||
writel(port_status | PORT_PE, addr);
|
||
port_status = readl(addr);
|
||
xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n",
|
||
wIndex, port_status);
|
||
}
|
||
|
||
static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
|
||
u16 wIndex, __le32 __iomem *addr, u32 port_status)
|
||
{
|
||
char *port_change_bit;
|
||
u32 status;
|
||
|
||
switch (wValue) {
|
||
case USB_PORT_FEAT_C_RESET:
|
||
status = PORT_RC;
|
||
port_change_bit = "reset";
|
||
break;
|
||
case USB_PORT_FEAT_C_BH_PORT_RESET:
|
||
status = PORT_WRC;
|
||
port_change_bit = "warm(BH) reset";
|
||
break;
|
||
case USB_PORT_FEAT_C_CONNECTION:
|
||
status = PORT_CSC;
|
||
port_change_bit = "connect";
|
||
break;
|
||
case USB_PORT_FEAT_C_OVER_CURRENT:
|
||
status = PORT_OCC;
|
||
port_change_bit = "over-current";
|
||
break;
|
||
case USB_PORT_FEAT_C_ENABLE:
|
||
status = PORT_PEC;
|
||
port_change_bit = "enable/disable";
|
||
break;
|
||
case USB_PORT_FEAT_C_SUSPEND:
|
||
status = PORT_PLC;
|
||
port_change_bit = "suspend/resume";
|
||
break;
|
||
case USB_PORT_FEAT_C_PORT_LINK_STATE:
|
||
status = PORT_PLC;
|
||
port_change_bit = "link state";
|
||
break;
|
||
default:
|
||
/* Should never happen */
|
||
return;
|
||
}
|
||
/* Change bits are all write 1 to clear */
|
||
writel(port_status | status, addr);
|
||
port_status = readl(addr);
|
||
xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
|
||
port_change_bit, wIndex, port_status);
|
||
}
|
||
|
||
static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
|
||
{
|
||
int max_ports;
|
||
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
||
|
||
if (hcd->speed == HCD_USB3) {
|
||
max_ports = xhci->num_usb3_ports;
|
||
*port_array = xhci->usb3_ports;
|
||
} else {
|
||
max_ports = xhci->num_usb2_ports;
|
||
*port_array = xhci->usb2_ports;
|
||
}
|
||
|
||
return max_ports;
|
||
}
|
||
|
||
void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
|
||
int port_id, u32 link_state)
|
||
{
|
||
u32 temp;
|
||
|
||
temp = readl(port_array[port_id]);
|
||
temp = xhci_port_state_to_neutral(temp);
|
||
temp &= ~PORT_PLS_MASK;
|
||
temp |= PORT_LINK_STROBE | link_state;
|
||
writel(temp, port_array[port_id]);
|
||
}
|
||
|
||
static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
|
||
__le32 __iomem **port_array, int port_id, u16 wake_mask)
|
||
{
|
||
u32 temp;
|
||
|
||
temp = readl(port_array[port_id]);
|
||
temp = xhci_port_state_to_neutral(temp);
|
||
|
||
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
|
||
temp |= PORT_WKCONN_E;
|
||
else
|
||
temp &= ~PORT_WKCONN_E;
|
||
|
||
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
|
||
temp |= PORT_WKDISC_E;
|
||
else
|
||
temp &= ~PORT_WKDISC_E;
|
||
|
||
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
|
||
temp |= PORT_WKOC_E;
|
||
else
|
||
temp &= ~PORT_WKOC_E;
|
||
|
||
writel(temp, port_array[port_id]);
|
||
}
|
||
|
||
/* Test and clear port RWC bit */
|
||
void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
|
||
int port_id, u32 port_bit)
|
||
{
|
||
u32 temp;
|
||
|
||
temp = readl(port_array[port_id]);
|
||
if (temp & port_bit) {
|
||
temp = xhci_port_state_to_neutral(temp);
|
||
temp |= port_bit;
|
||
writel(temp, port_array[port_id]);
|
||
}
|
||
}
|
||
|
||
/* Updates Link Status for USB 2.1 port */
|
||
static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg)
|
||
{
|
||
if ((status_reg & PORT_PLS_MASK) == XDEV_U2)
|
||
*status |= USB_PORT_STAT_L1;
|
||
}
|
||
|
||
/* Updates Link Status for super Speed port */
|
||
static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
|
||
u32 *status, u32 status_reg)
|
||
{
|
||
u32 pls = status_reg & PORT_PLS_MASK;
|
||
|
||
/* resume state is a xHCI internal state.
|
||
* Do not report it to usb core.
|
||
*/
|
||
if (pls == XDEV_RESUME)
|
||
return;
|
||
|
||
/* When the CAS bit is set then warm reset
|
||
* should be performed on port
|
||
*/
|
||
if (status_reg & PORT_CAS) {
|
||
/* The CAS bit can be set while the port is
|
||
* in any link state.
|
||
* Only roothubs have CAS bit, so we
|
||
* pretend to be in compliance mode
|
||
* unless we're already in compliance
|
||
* or the inactive state.
|
||
*/
|
||
if (pls != USB_SS_PORT_LS_COMP_MOD &&
|
||
pls != USB_SS_PORT_LS_SS_INACTIVE) {
|
||
pls = USB_SS_PORT_LS_COMP_MOD;
|
||
}
|
||
/* Return also connection bit -
|
||
* hub state machine resets port
|
||
* when this bit is set.
|
||
*/
|
||
pls |= USB_PORT_STAT_CONNECTION;
|
||
} else {
|
||
/*
|
||
* If CAS bit isn't set but the Port is already at
|
||
* Compliance Mode, fake a connection so the USB core
|
||
* notices the Compliance state and resets the port.
|
||
* This resolves an issue generated by the SN65LVPE502CP
|
||
* in which sometimes the port enters compliance mode
|
||
* caused by a delay on the host-device negotiation.
|
||
*/
|
||
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
|
||
(pls == USB_SS_PORT_LS_COMP_MOD))
|
||
pls |= USB_PORT_STAT_CONNECTION;
|
||
}
|
||
|
||
/* update status field */
|
||
*status |= pls;
|
||
}
|
||
|
||
/*
|
||
* Function for Compliance Mode Quirk.
|
||
*
|
||
* This Function verifies if all xhc USB3 ports have entered U0, if so,
|
||
* the compliance mode timer is deleted. A port won't enter
|
||
* compliance mode if it has previously entered U0.
|
||
*/
|
||
static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
|
||
u16 wIndex)
|
||
{
|
||
u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
|
||
bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
|
||
|
||
if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
|
||
return;
|
||
|
||
if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
|
||
xhci->port_status_u0 |= 1 << wIndex;
|
||
if (xhci->port_status_u0 == all_ports_seen_u0) {
|
||
del_timer_sync(&xhci->comp_mode_recovery_timer);
|
||
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
|
||
"All USB3 ports have entered U0 already!");
|
||
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
|
||
"Compliance Mode Recovery Timer Deleted.");
|
||
}
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Converts a raw xHCI port status into the format that external USB 2.0 or USB
|
||
* 3.0 hubs use.
|
||
*
|
||
* Possible side effects:
|
||
* - Mark a port as being done with device resume,
|
||
* and ring the endpoint doorbells.
|
||
* - Stop the Synopsys redriver Compliance Mode polling.
|
||
* - Drop and reacquire the xHCI lock, in order to wait for port resume.
|
||
*/
|
||
static u32 xhci_get_port_status(struct usb_hcd *hcd,
|
||
struct xhci_bus_state *bus_state,
|
||
__le32 __iomem **port_array,
|
||
u16 wIndex, u32 raw_port_status,
|
||
unsigned long flags)
|
||
__releases(&xhci->lock)
|
||
__acquires(&xhci->lock)
|
||
{
|
||
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
||
u32 status = 0;
|
||
int slot_id;
|
||
|
||
/* wPortChange bits */
|
||
if (raw_port_status & PORT_CSC)
|
||
status |= USB_PORT_STAT_C_CONNECTION << 16;
|
||
if (raw_port_status & PORT_PEC)
|
||
status |= USB_PORT_STAT_C_ENABLE << 16;
|
||
if ((raw_port_status & PORT_OCC))
|
||
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
|
||
if ((raw_port_status & PORT_RC))
|
||
status |= USB_PORT_STAT_C_RESET << 16;
|
||
/* USB3.0 only */
|
||
if (hcd->speed == HCD_USB3) {
|
||
if ((raw_port_status & PORT_PLC))
|
||
status |= USB_PORT_STAT_C_LINK_STATE << 16;
|
||
if ((raw_port_status & PORT_WRC))
|
||
status |= USB_PORT_STAT_C_BH_RESET << 16;
|
||
}
|
||
|
||
if (hcd->speed != HCD_USB3) {
|
||
if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3
|
||
&& (raw_port_status & PORT_POWER))
|
||
status |= USB_PORT_STAT_SUSPEND;
|
||
}
|
||
if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
|
||
!DEV_SUPERSPEED(raw_port_status)) {
|
||
if ((raw_port_status & PORT_RESET) ||
|
||
!(raw_port_status & PORT_PE))
|
||
return 0xffffffff;
|
||
if (time_after_eq(jiffies,
|
||
bus_state->resume_done[wIndex])) {
|
||
int time_left;
|
||
|
||
xhci_dbg(xhci, "Resume USB2 port %d\n",
|
||
wIndex + 1);
|
||
bus_state->resume_done[wIndex] = 0;
|
||
clear_bit(wIndex, &bus_state->resuming_ports);
|
||
|
||
set_bit(wIndex, &bus_state->rexit_ports);
|
||
xhci_set_link_state(xhci, port_array, wIndex,
|
||
XDEV_U0);
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
time_left = wait_for_completion_timeout(
|
||
&bus_state->rexit_done[wIndex],
|
||
msecs_to_jiffies(
|
||
XHCI_MAX_REXIT_TIMEOUT));
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
|
||
if (time_left) {
|
||
slot_id = xhci_find_slot_id_by_port(hcd,
|
||
xhci, wIndex + 1);
|
||
if (!slot_id) {
|
||
xhci_dbg(xhci, "slot_id is zero\n");
|
||
return 0xffffffff;
|
||
}
|
||
xhci_ring_device(xhci, slot_id);
|
||
} else {
|
||
int port_status = readl(port_array[wIndex]);
|
||
xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
|
||
XHCI_MAX_REXIT_TIMEOUT,
|
||
port_status);
|
||
status |= USB_PORT_STAT_SUSPEND;
|
||
clear_bit(wIndex, &bus_state->rexit_ports);
|
||
}
|
||
|
||
bus_state->port_c_suspend |= 1 << wIndex;
|
||
bus_state->suspended_ports &= ~(1 << wIndex);
|
||
} else {
|
||
/*
|
||
* The resume has been signaling for less than
|
||
* 20ms. Report the port status as SUSPEND,
|
||
* let the usbcore check port status again
|
||
* and clear resume signaling later.
|
||
*/
|
||
status |= USB_PORT_STAT_SUSPEND;
|
||
}
|
||
}
|
||
if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0
|
||
&& (raw_port_status & PORT_POWER)
|
||
&& (bus_state->suspended_ports & (1 << wIndex))) {
|
||
bus_state->suspended_ports &= ~(1 << wIndex);
|
||
if (hcd->speed != HCD_USB3)
|
||
bus_state->port_c_suspend |= 1 << wIndex;
|
||
}
|
||
if (raw_port_status & PORT_CONNECT) {
|
||
status |= USB_PORT_STAT_CONNECTION;
|
||
status |= xhci_port_speed(raw_port_status);
|
||
}
|
||
if (raw_port_status & PORT_PE)
|
||
status |= USB_PORT_STAT_ENABLE;
|
||
if (raw_port_status & PORT_OC)
|
||
status |= USB_PORT_STAT_OVERCURRENT;
|
||
if (raw_port_status & PORT_RESET)
|
||
status |= USB_PORT_STAT_RESET;
|
||
if (raw_port_status & PORT_POWER) {
|
||
if (hcd->speed == HCD_USB3)
|
||
status |= USB_SS_PORT_STAT_POWER;
|
||
else
|
||
status |= USB_PORT_STAT_POWER;
|
||
}
|
||
/* Update Port Link State */
|
||
if (hcd->speed == HCD_USB3) {
|
||
xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
|
||
/*
|
||
* Verify if all USB3 Ports Have entered U0 already.
|
||
* Delete Compliance Mode Timer if so.
|
||
*/
|
||
xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex);
|
||
} else {
|
||
xhci_hub_report_usb2_link_state(&status, raw_port_status);
|
||
}
|
||
if (bus_state->port_c_suspend & (1 << wIndex))
|
||
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
|
||
|
||
return status;
|
||
}
|
||
|
||
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
|
||
u16 wIndex, char *buf, u16 wLength)
|
||
{
|
||
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
||
int max_ports;
|
||
unsigned long flags;
|
||
u32 temp, status;
|
||
int retval = 0;
|
||
__le32 __iomem **port_array;
|
||
int slot_id;
|
||
struct xhci_bus_state *bus_state;
|
||
u16 link_state = 0;
|
||
u16 wake_mask = 0;
|
||
u16 timeout = 0;
|
||
|
||
max_ports = xhci_get_ports(hcd, &port_array);
|
||
bus_state = &xhci->bus_state[hcd_index(hcd)];
|
||
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
switch (typeReq) {
|
||
case GetHubStatus:
|
||
/* No power source, over-current reported per port */
|
||
memset(buf, 0, 4);
|
||
break;
|
||
case GetHubDescriptor:
|
||
/* Check to make sure userspace is asking for the USB 3.0 hub
|
||
* descriptor for the USB 3.0 roothub. If not, we stall the
|
||
* endpoint, like external hubs do.
|
||
*/
|
||
if (hcd->speed == HCD_USB3 &&
|
||
(wLength < USB_DT_SS_HUB_SIZE ||
|
||
wValue != (USB_DT_SS_HUB << 8))) {
|
||
xhci_dbg(xhci, "Wrong hub descriptor type for "
|
||
"USB 3.0 roothub.\n");
|
||
goto error;
|
||
}
|
||
xhci_hub_descriptor(hcd, xhci,
|
||
(struct usb_hub_descriptor *) buf);
|
||
break;
|
||
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
|
||
if ((wValue & 0xff00) != (USB_DT_BOS << 8))
|
||
goto error;
|
||
|
||
if (hcd->speed != HCD_USB3)
|
||
goto error;
|
||
|
||
/* Set the U1 and U2 exit latencies. */
|
||
memcpy(buf, &usb_bos_descriptor,
|
||
USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
|
||
if ((xhci->quirks & XHCI_LPM_SUPPORT)) {
|
||
temp = readl(&xhci->cap_regs->hcs_params3);
|
||
buf[12] = HCS_U1_LATENCY(temp);
|
||
put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
|
||
}
|
||
|
||
/* Indicate whether the host has LTM support. */
|
||
temp = readl(&xhci->cap_regs->hcc_params);
|
||
if (HCC_LTC(temp))
|
||
buf[8] |= USB_LTM_SUPPORT;
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
|
||
case GetPortStatus:
|
||
if (!wIndex || wIndex > max_ports)
|
||
goto error;
|
||
wIndex--;
|
||
temp = readl(port_array[wIndex]);
|
||
if (temp == 0xffffffff) {
|
||
retval = -ENODEV;
|
||
break;
|
||
}
|
||
status = xhci_get_port_status(hcd, bus_state, port_array,
|
||
wIndex, temp, flags);
|
||
if (status == 0xffffffff)
|
||
goto error;
|
||
|
||
xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n",
|
||
wIndex, temp);
|
||
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
|
||
|
||
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
|
||
break;
|
||
case SetPortFeature:
|
||
if (wValue == USB_PORT_FEAT_LINK_STATE)
|
||
link_state = (wIndex & 0xff00) >> 3;
|
||
if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
|
||
wake_mask = wIndex & 0xff00;
|
||
/* The MSB of wIndex is the U1/U2 timeout */
|
||
timeout = (wIndex & 0xff00) >> 8;
|
||
wIndex &= 0xff;
|
||
if (!wIndex || wIndex > max_ports)
|
||
goto error;
|
||
wIndex--;
|
||
temp = readl(port_array[wIndex]);
|
||
if (temp == 0xffffffff) {
|
||
retval = -ENODEV;
|
||
break;
|
||
}
|
||
temp = xhci_port_state_to_neutral(temp);
|
||
/* FIXME: What new port features do we need to support? */
|
||
switch (wValue) {
|
||
case USB_PORT_FEAT_SUSPEND:
|
||
temp = readl(port_array[wIndex]);
|
||
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
|
||
/* Resume the port to U0 first */
|
||
xhci_set_link_state(xhci, port_array, wIndex,
|
||
XDEV_U0);
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
msleep(10);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
}
|
||
/* In spec software should not attempt to suspend
|
||
* a port unless the port reports that it is in the
|
||
* enabled (PED = ‘1’,PLS < ‘3’) state.
|
||
*/
|
||
temp = readl(port_array[wIndex]);
|
||
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|
||
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
|
||
xhci_warn(xhci, "USB core suspending device "
|
||
"not in U0/U1/U2.\n");
|
||
goto error;
|
||
}
|
||
|
||
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
|
||
wIndex + 1);
|
||
if (!slot_id) {
|
||
xhci_warn(xhci, "slot_id is zero\n");
|
||
goto error;
|
||
}
|
||
/* unlock to execute stop endpoint commands */
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
xhci_stop_device(xhci, slot_id, 1);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
|
||
xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
msleep(10); /* wait device to enter */
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
|
||
temp = readl(port_array[wIndex]);
|
||
bus_state->suspended_ports |= 1 << wIndex;
|
||
break;
|
||
case USB_PORT_FEAT_LINK_STATE:
|
||
temp = readl(port_array[wIndex]);
|
||
|
||
/* Disable port */
|
||
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
|
||
xhci_dbg(xhci, "Disable port %d\n", wIndex);
|
||
temp = xhci_port_state_to_neutral(temp);
|
||
/*
|
||
* Clear all change bits, so that we get a new
|
||
* connection event.
|
||
*/
|
||
temp |= PORT_CSC | PORT_PEC | PORT_WRC |
|
||
PORT_OCC | PORT_RC | PORT_PLC |
|
||
PORT_CEC;
|
||
writel(temp | PORT_PE, port_array[wIndex]);
|
||
temp = readl(port_array[wIndex]);
|
||
break;
|
||
}
|
||
|
||
/* Put link in RxDetect (enable port) */
|
||
if (link_state == USB_SS_PORT_LS_RX_DETECT) {
|
||
xhci_dbg(xhci, "Enable port %d\n", wIndex);
|
||
xhci_set_link_state(xhci, port_array, wIndex,
|
||
link_state);
|
||
temp = readl(port_array[wIndex]);
|
||
break;
|
||
}
|
||
|
||
/* Software should not attempt to set
|
||
* port link state above '3' (U3) and the port
|
||
* must be enabled.
|
||
*/
|
||
if ((temp & PORT_PE) == 0 ||
|
||
(link_state > USB_SS_PORT_LS_U3)) {
|
||
xhci_warn(xhci, "Cannot set link state.\n");
|
||
goto error;
|
||
}
|
||
|
||
if (link_state == USB_SS_PORT_LS_U3) {
|
||
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
|
||
wIndex + 1);
|
||
if (slot_id) {
|
||
/* unlock to execute stop endpoint
|
||
* commands */
|
||
spin_unlock_irqrestore(&xhci->lock,
|
||
flags);
|
||
xhci_stop_device(xhci, slot_id, 1);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
}
|
||
}
|
||
|
||
xhci_set_link_state(xhci, port_array, wIndex,
|
||
link_state);
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
msleep(20); /* wait device to enter */
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
|
||
temp = readl(port_array[wIndex]);
|
||
if (link_state == USB_SS_PORT_LS_U3)
|
||
bus_state->suspended_ports |= 1 << wIndex;
|
||
break;
|
||
case USB_PORT_FEAT_POWER:
|
||
/*
|
||
* Turn on ports, even if there isn't per-port switching.
|
||
* HC will report connect events even before this is set.
|
||
* However, hub_wq will ignore the roothub events until
|
||
* the roothub is registered.
|
||
*/
|
||
writel(temp | PORT_POWER, port_array[wIndex]);
|
||
|
||
temp = readl(port_array[wIndex]);
|
||
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
temp = usb_acpi_power_manageable(hcd->self.root_hub,
|
||
wIndex);
|
||
if (temp)
|
||
usb_acpi_set_power_state(hcd->self.root_hub,
|
||
wIndex, true);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
break;
|
||
case USB_PORT_FEAT_RESET:
|
||
temp = (temp | PORT_RESET);
|
||
writel(temp, port_array[wIndex]);
|
||
|
||
temp = readl(port_array[wIndex]);
|
||
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
|
||
break;
|
||
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
|
||
xhci_set_remote_wake_mask(xhci, port_array,
|
||
wIndex, wake_mask);
|
||
temp = readl(port_array[wIndex]);
|
||
xhci_dbg(xhci, "set port remote wake mask, "
|
||
"actual port %d status = 0x%x\n",
|
||
wIndex, temp);
|
||
break;
|
||
case USB_PORT_FEAT_BH_PORT_RESET:
|
||
temp |= PORT_WR;
|
||
writel(temp, port_array[wIndex]);
|
||
|
||
temp = readl(port_array[wIndex]);
|
||
break;
|
||
case USB_PORT_FEAT_U1_TIMEOUT:
|
||
if (hcd->speed != HCD_USB3)
|
||
goto error;
|
||
temp = readl(port_array[wIndex] + PORTPMSC);
|
||
temp &= ~PORT_U1_TIMEOUT_MASK;
|
||
temp |= PORT_U1_TIMEOUT(timeout);
|
||
writel(temp, port_array[wIndex] + PORTPMSC);
|
||
break;
|
||
case USB_PORT_FEAT_U2_TIMEOUT:
|
||
if (hcd->speed != HCD_USB3)
|
||
goto error;
|
||
temp = readl(port_array[wIndex] + PORTPMSC);
|
||
temp &= ~PORT_U2_TIMEOUT_MASK;
|
||
temp |= PORT_U2_TIMEOUT(timeout);
|
||
writel(temp, port_array[wIndex] + PORTPMSC);
|
||
break;
|
||
default:
|
||
goto error;
|
||
}
|
||
/* unblock any posted writes */
|
||
temp = readl(port_array[wIndex]);
|
||
break;
|
||
case ClearPortFeature:
|
||
if (!wIndex || wIndex > max_ports)
|
||
goto error;
|
||
wIndex--;
|
||
temp = readl(port_array[wIndex]);
|
||
if (temp == 0xffffffff) {
|
||
retval = -ENODEV;
|
||
break;
|
||
}
|
||
/* FIXME: What new port features do we need to support? */
|
||
temp = xhci_port_state_to_neutral(temp);
|
||
switch (wValue) {
|
||
case USB_PORT_FEAT_SUSPEND:
|
||
temp = readl(port_array[wIndex]);
|
||
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
|
||
xhci_dbg(xhci, "PORTSC %04x\n", temp);
|
||
if (temp & PORT_RESET)
|
||
goto error;
|
||
if ((temp & PORT_PLS_MASK) == XDEV_U3) {
|
||
if ((temp & PORT_PE) == 0)
|
||
goto error;
|
||
|
||
xhci_set_link_state(xhci, port_array, wIndex,
|
||
XDEV_RESUME);
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
msleep(20);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
xhci_set_link_state(xhci, port_array, wIndex,
|
||
XDEV_U0);
|
||
}
|
||
bus_state->port_c_suspend |= 1 << wIndex;
|
||
|
||
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
|
||
wIndex + 1);
|
||
if (!slot_id) {
|
||
xhci_dbg(xhci, "slot_id is zero\n");
|
||
goto error;
|
||
}
|
||
xhci_ring_device(xhci, slot_id);
|
||
break;
|
||
case USB_PORT_FEAT_C_SUSPEND:
|
||
bus_state->port_c_suspend &= ~(1 << wIndex);
|
||
case USB_PORT_FEAT_C_RESET:
|
||
case USB_PORT_FEAT_C_BH_PORT_RESET:
|
||
case USB_PORT_FEAT_C_CONNECTION:
|
||
case USB_PORT_FEAT_C_OVER_CURRENT:
|
||
case USB_PORT_FEAT_C_ENABLE:
|
||
case USB_PORT_FEAT_C_PORT_LINK_STATE:
|
||
xhci_clear_port_change_bit(xhci, wValue, wIndex,
|
||
port_array[wIndex], temp);
|
||
break;
|
||
case USB_PORT_FEAT_ENABLE:
|
||
xhci_disable_port(hcd, xhci, wIndex,
|
||
port_array[wIndex], temp);
|
||
break;
|
||
case USB_PORT_FEAT_POWER:
|
||
writel(temp & ~PORT_POWER, port_array[wIndex]);
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
temp = usb_acpi_power_manageable(hcd->self.root_hub,
|
||
wIndex);
|
||
if (temp)
|
||
usb_acpi_set_power_state(hcd->self.root_hub,
|
||
wIndex, false);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
break;
|
||
default:
|
||
goto error;
|
||
}
|
||
break;
|
||
default:
|
||
error:
|
||
/* "stall" on error */
|
||
retval = -EPIPE;
|
||
}
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
return retval;
|
||
}
|
||
|
||
/*
|
||
* Returns 0 if the status hasn't changed, or the number of bytes in buf.
|
||
* Ports are 0-indexed from the HCD point of view,
|
||
* and 1-indexed from the USB core pointer of view.
|
||
*
|
||
* Note that the status change bits will be cleared as soon as a port status
|
||
* change event is generated, so we use the saved status from that event.
|
||
*/
|
||
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
|
||
{
|
||
unsigned long flags;
|
||
u32 temp, status;
|
||
u32 mask;
|
||
int i, retval;
|
||
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
||
int max_ports;
|
||
__le32 __iomem **port_array;
|
||
struct xhci_bus_state *bus_state;
|
||
bool reset_change = false;
|
||
|
||
max_ports = xhci_get_ports(hcd, &port_array);
|
||
bus_state = &xhci->bus_state[hcd_index(hcd)];
|
||
|
||
/* Initial status is no changes */
|
||
retval = (max_ports + 8) / 8;
|
||
memset(buf, 0, retval);
|
||
|
||
/*
|
||
* Inform the usbcore about resume-in-progress by returning
|
||
* a non-zero value even if there are no status changes.
|
||
*/
|
||
status = bus_state->resuming_ports;
|
||
|
||
mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
|
||
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
/* For each port, did anything change? If so, set that bit in buf. */
|
||
for (i = 0; i < max_ports; i++) {
|
||
temp = readl(port_array[i]);
|
||
if (temp == 0xffffffff) {
|
||
retval = -ENODEV;
|
||
break;
|
||
}
|
||
if ((temp & mask) != 0 ||
|
||
(bus_state->port_c_suspend & 1 << i) ||
|
||
(bus_state->resume_done[i] && time_after_eq(
|
||
jiffies, bus_state->resume_done[i]))) {
|
||
buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
|
||
status = 1;
|
||
}
|
||
if ((temp & PORT_RC))
|
||
reset_change = true;
|
||
}
|
||
if (!status && !reset_change) {
|
||
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
|
||
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
||
}
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
return status ? retval : 0;
|
||
}
|
||
|
||
#ifdef CONFIG_PM
|
||
|
||
int xhci_bus_suspend(struct usb_hcd *hcd)
|
||
{
|
||
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
||
int max_ports, port_index;
|
||
__le32 __iomem **port_array;
|
||
struct xhci_bus_state *bus_state;
|
||
unsigned long flags;
|
||
|
||
max_ports = xhci_get_ports(hcd, &port_array);
|
||
bus_state = &xhci->bus_state[hcd_index(hcd)];
|
||
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
|
||
if (hcd->self.root_hub->do_remote_wakeup) {
|
||
if (bus_state->resuming_ports) {
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
xhci_dbg(xhci, "suspend failed because "
|
||
"a port is resuming\n");
|
||
return -EBUSY;
|
||
}
|
||
}
|
||
|
||
port_index = max_ports;
|
||
bus_state->bus_suspended = 0;
|
||
while (port_index--) {
|
||
/* suspend the port if the port is not suspended */
|
||
u32 t1, t2;
|
||
int slot_id;
|
||
|
||
t1 = readl(port_array[port_index]);
|
||
t2 = xhci_port_state_to_neutral(t1);
|
||
|
||
if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
|
||
xhci_dbg(xhci, "port %d not suspended\n", port_index);
|
||
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
|
||
port_index + 1);
|
||
if (slot_id) {
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
xhci_stop_device(xhci, slot_id, 1);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
}
|
||
t2 &= ~PORT_PLS_MASK;
|
||
t2 |= PORT_LINK_STROBE | XDEV_U3;
|
||
set_bit(port_index, &bus_state->bus_suspended);
|
||
}
|
||
/* USB core sets remote wake mask for USB 3.0 hubs,
|
||
* including the USB 3.0 roothub, but only if CONFIG_PM
|
||
* is enabled, so also enable remote wake here.
|
||
*/
|
||
if (hcd->self.root_hub->do_remote_wakeup) {
|
||
if (t1 & PORT_CONNECT) {
|
||
t2 |= PORT_WKOC_E | PORT_WKDISC_E;
|
||
t2 &= ~PORT_WKCONN_E;
|
||
} else {
|
||
t2 |= PORT_WKOC_E | PORT_WKCONN_E;
|
||
t2 &= ~PORT_WKDISC_E;
|
||
}
|
||
} else
|
||
t2 &= ~PORT_WAKE_BITS;
|
||
|
||
t1 = xhci_port_state_to_neutral(t1);
|
||
if (t1 != t2)
|
||
writel(t2, port_array[port_index]);
|
||
}
|
||
hcd->state = HC_STATE_SUSPENDED;
|
||
bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
return 0;
|
||
}
|
||
|
||
int xhci_bus_resume(struct usb_hcd *hcd)
|
||
{
|
||
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
||
int max_ports, port_index;
|
||
__le32 __iomem **port_array;
|
||
struct xhci_bus_state *bus_state;
|
||
u32 temp;
|
||
unsigned long flags;
|
||
|
||
max_ports = xhci_get_ports(hcd, &port_array);
|
||
bus_state = &xhci->bus_state[hcd_index(hcd)];
|
||
|
||
if (time_before(jiffies, bus_state->next_statechange))
|
||
msleep(5);
|
||
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
if (!HCD_HW_ACCESSIBLE(hcd)) {
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
return -ESHUTDOWN;
|
||
}
|
||
|
||
/* delay the irqs */
|
||
temp = readl(&xhci->op_regs->command);
|
||
temp &= ~CMD_EIE;
|
||
writel(temp, &xhci->op_regs->command);
|
||
|
||
port_index = max_ports;
|
||
while (port_index--) {
|
||
/* Check whether need resume ports. If needed
|
||
resume port and disable remote wakeup */
|
||
u32 temp;
|
||
int slot_id;
|
||
|
||
temp = readl(port_array[port_index]);
|
||
if (DEV_SUPERSPEED(temp))
|
||
temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
|
||
else
|
||
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
|
||
if (test_bit(port_index, &bus_state->bus_suspended) &&
|
||
(temp & PORT_PLS_MASK)) {
|
||
if (DEV_SUPERSPEED(temp)) {
|
||
xhci_set_link_state(xhci, port_array,
|
||
port_index, XDEV_U0);
|
||
} else {
|
||
xhci_set_link_state(xhci, port_array,
|
||
port_index, XDEV_RESUME);
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
msleep(20);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
|
||
xhci_set_link_state(xhci, port_array,
|
||
port_index, XDEV_U0);
|
||
}
|
||
/* wait for the port to enter U0 and report port link
|
||
* state change.
|
||
*/
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
msleep(20);
|
||
spin_lock_irqsave(&xhci->lock, flags);
|
||
|
||
/* Clear PLC */
|
||
xhci_test_and_clear_bit(xhci, port_array, port_index,
|
||
PORT_PLC);
|
||
|
||
slot_id = xhci_find_slot_id_by_port(hcd,
|
||
xhci, port_index + 1);
|
||
if (slot_id)
|
||
xhci_ring_device(xhci, slot_id);
|
||
} else
|
||
writel(temp, port_array[port_index]);
|
||
}
|
||
|
||
(void) readl(&xhci->op_regs->command);
|
||
|
||
bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
|
||
/* re-enable irqs */
|
||
temp = readl(&xhci->op_regs->command);
|
||
temp |= CMD_EIE;
|
||
writel(temp, &xhci->op_regs->command);
|
||
temp = readl(&xhci->op_regs->command);
|
||
|
||
spin_unlock_irqrestore(&xhci->lock, flags);
|
||
return 0;
|
||
}
|
||
|
||
#endif /* CONFIG_PM */
|