![Wim Van Sebroeck](/assets/img/avatar_default.png)
nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
350 lines
7.9 KiB
C
350 lines
7.9 KiB
C
/*
|
|
* Advantech Single Board Computer WDT driver
|
|
*
|
|
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
|
|
*
|
|
* Based on acquirewdt.c which is based on wdt.c.
|
|
* Original copyright messages:
|
|
*
|
|
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
|
|
* All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
|
|
* warranty for any of this software. This material is provided
|
|
* "AS-IS" and at no charge.
|
|
*
|
|
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
|
|
*
|
|
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
|
|
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
|
|
*
|
|
* 16-Oct-2002 Rob Radez <rob@osinvestor.com>
|
|
* Clean up ioctls, clean up init + exit, add expect close support,
|
|
* add wdt_start and wdt_stop as parameters.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#define DRV_NAME "advantechwdt"
|
|
#define WATCHDOG_NAME "Advantech WDT"
|
|
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
|
|
|
|
/* the watchdog platform device */
|
|
static struct platform_device *advwdt_platform_device;
|
|
static unsigned long advwdt_is_open;
|
|
static char adv_expect_close;
|
|
|
|
/*
|
|
* You must set these - there is no sane way to probe for this board.
|
|
*
|
|
* To enable or restart, write the timeout value in seconds (1 to 63)
|
|
* to I/O port wdt_start. To disable, read I/O port wdt_stop.
|
|
* Both are 0x443 for most boards (tested on a PCA-6276VE-00B1), but
|
|
* check your manual (at least the PCA-6159 seems to be different -
|
|
* the manual says wdt_stop is 0x43, not 0x443).
|
|
* (0x43 is also a write-only control register for the 8254 timer!)
|
|
*/
|
|
|
|
static int wdt_stop = 0x443;
|
|
module_param(wdt_stop, int, 0);
|
|
MODULE_PARM_DESC(wdt_stop, "Advantech WDT 'stop' io port (default 0x443)");
|
|
|
|
static int wdt_start = 0x443;
|
|
module_param(wdt_start, int, 0);
|
|
MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)");
|
|
|
|
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout,
|
|
"Watchdog timeout in seconds. 1<= timeout <=63, default="
|
|
__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
/*
|
|
* Watchdog Operations
|
|
*/
|
|
|
|
static void advwdt_ping(void)
|
|
{
|
|
/* Write a watchdog value */
|
|
outb_p(timeout, wdt_start);
|
|
}
|
|
|
|
static void advwdt_disable(void)
|
|
{
|
|
inb_p(wdt_stop);
|
|
}
|
|
|
|
static int advwdt_set_heartbeat(int t)
|
|
{
|
|
if (t < 1 || t > 63)
|
|
return -EINVAL;
|
|
timeout = t;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* /dev/watchdog handling
|
|
*/
|
|
|
|
static ssize_t advwdt_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
if (count) {
|
|
if (!nowayout) {
|
|
size_t i;
|
|
|
|
adv_expect_close = 0;
|
|
|
|
for (i = 0; i != count; i++) {
|
|
char c;
|
|
if (get_user(c, buf + i))
|
|
return -EFAULT;
|
|
if (c == 'V')
|
|
adv_expect_close = 42;
|
|
}
|
|
}
|
|
advwdt_ping();
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
int new_timeout;
|
|
void __user *argp = (void __user *)arg;
|
|
int __user *p = argp;
|
|
static const struct watchdog_info ident = {
|
|
.options = WDIOF_KEEPALIVEPING |
|
|
WDIOF_SETTIMEOUT |
|
|
WDIOF_MAGICCLOSE,
|
|
.firmware_version = 1,
|
|
.identity = WATCHDOG_NAME,
|
|
};
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
if (copy_to_user(argp, &ident, sizeof(ident)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, p);
|
|
|
|
case WDIOC_SETOPTIONS:
|
|
{
|
|
int options, retval = -EINVAL;
|
|
|
|
if (get_user(options, p))
|
|
return -EFAULT;
|
|
if (options & WDIOS_DISABLECARD) {
|
|
advwdt_disable();
|
|
retval = 0;
|
|
}
|
|
if (options & WDIOS_ENABLECARD) {
|
|
advwdt_ping();
|
|
retval = 0;
|
|
}
|
|
return retval;
|
|
}
|
|
case WDIOC_KEEPALIVE:
|
|
advwdt_ping();
|
|
break;
|
|
|
|
case WDIOC_SETTIMEOUT:
|
|
if (get_user(new_timeout, p))
|
|
return -EFAULT;
|
|
if (advwdt_set_heartbeat(new_timeout))
|
|
return -EINVAL;
|
|
advwdt_ping();
|
|
/* Fall */
|
|
case WDIOC_GETTIMEOUT:
|
|
return put_user(timeout, p);
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int advwdt_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_and_set_bit(0, &advwdt_is_open))
|
|
return -EBUSY;
|
|
/*
|
|
* Activate
|
|
*/
|
|
|
|
advwdt_ping();
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int advwdt_close(struct inode *inode, struct file *file)
|
|
{
|
|
if (adv_expect_close == 42) {
|
|
advwdt_disable();
|
|
} else {
|
|
pr_crit("Unexpected close, not stopping watchdog!\n");
|
|
advwdt_ping();
|
|
}
|
|
clear_bit(0, &advwdt_is_open);
|
|
adv_expect_close = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Kernel Interfaces
|
|
*/
|
|
|
|
static const struct file_operations advwdt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = advwdt_write,
|
|
.unlocked_ioctl = advwdt_ioctl,
|
|
.open = advwdt_open,
|
|
.release = advwdt_close,
|
|
};
|
|
|
|
static struct miscdevice advwdt_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &advwdt_fops,
|
|
};
|
|
|
|
/*
|
|
* Init & exit routines
|
|
*/
|
|
|
|
static int __devinit advwdt_probe(struct platform_device *dev)
|
|
{
|
|
int ret;
|
|
|
|
if (wdt_stop != wdt_start) {
|
|
if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
|
|
pr_err("I/O address 0x%04x already in use\n",
|
|
wdt_stop);
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
|
|
pr_err("I/O address 0x%04x already in use\n", wdt_start);
|
|
ret = -EIO;
|
|
goto unreg_stop;
|
|
}
|
|
|
|
/* Check that the heartbeat value is within it's range ;
|
|
* if not reset to the default */
|
|
if (advwdt_set_heartbeat(timeout)) {
|
|
advwdt_set_heartbeat(WATCHDOG_TIMEOUT);
|
|
pr_info("timeout value must be 1<=x<=63, using %d\n", timeout);
|
|
}
|
|
|
|
ret = misc_register(&advwdt_miscdev);
|
|
if (ret != 0) {
|
|
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
|
|
WATCHDOG_MINOR, ret);
|
|
goto unreg_regions;
|
|
}
|
|
pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
|
|
timeout, nowayout);
|
|
out:
|
|
return ret;
|
|
unreg_regions:
|
|
release_region(wdt_start, 1);
|
|
unreg_stop:
|
|
if (wdt_stop != wdt_start)
|
|
release_region(wdt_stop, 1);
|
|
goto out;
|
|
}
|
|
|
|
static int __devexit advwdt_remove(struct platform_device *dev)
|
|
{
|
|
misc_deregister(&advwdt_miscdev);
|
|
release_region(wdt_start, 1);
|
|
if (wdt_stop != wdt_start)
|
|
release_region(wdt_stop, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void advwdt_shutdown(struct platform_device *dev)
|
|
{
|
|
/* Turn the WDT off if we have a soft shutdown */
|
|
advwdt_disable();
|
|
}
|
|
|
|
static struct platform_driver advwdt_driver = {
|
|
.probe = advwdt_probe,
|
|
.remove = __devexit_p(advwdt_remove),
|
|
.shutdown = advwdt_shutdown,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
},
|
|
};
|
|
|
|
static int __init advwdt_init(void)
|
|
{
|
|
int err;
|
|
|
|
pr_info("WDT driver for Advantech single board computer initialising\n");
|
|
|
|
err = platform_driver_register(&advwdt_driver);
|
|
if (err)
|
|
return err;
|
|
|
|
advwdt_platform_device = platform_device_register_simple(DRV_NAME,
|
|
-1, NULL, 0);
|
|
if (IS_ERR(advwdt_platform_device)) {
|
|
err = PTR_ERR(advwdt_platform_device);
|
|
goto unreg_platform_driver;
|
|
}
|
|
|
|
return 0;
|
|
|
|
unreg_platform_driver:
|
|
platform_driver_unregister(&advwdt_driver);
|
|
return err;
|
|
}
|
|
|
|
static void __exit advwdt_exit(void)
|
|
{
|
|
platform_device_unregister(advwdt_platform_device);
|
|
platform_driver_unregister(&advwdt_driver);
|
|
pr_info("Watchdog Module Unloaded\n");
|
|
}
|
|
|
|
module_init(advwdt_init);
|
|
module_exit(advwdt_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Marek Michalkiewicz <marekm@linux.org.pl>");
|
|
MODULE_DESCRIPTION("Advantech Single Board Computer WDT driver");
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|