remarkable-linux/drivers/usb
Yoshihiro Shimoda 435cc1138e usb: host: xhci-plat: set resume_quirk() for R-Car controllers
This patch sets resume_quirk() for R-Car controllers to re-download
the firmware in resume timing. Otherwise, if the controller's power
is down in suspend timing, the firmware in the controller goes away,
and then the controller doesn't work after resume.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-19 19:59:17 +02:00
..
atm usb: atm: remove unnecessary code 2017-03-16 17:58:44 +09:00
c67x00
chipidea Two changes for this v4.12-rc1: 2017-04-18 16:52:20 +02:00
class usb: fix some references for /proc/bus/usb 2017-04-18 16:54:19 +02:00
common usb: otg-fsm: Prevent build warning "VDBG" redefined 2017-04-11 10:58:23 +03:00
core usb: fix some references for /proc/bus/usb 2017-04-18 16:54:19 +02:00
dwc2 usb: changes for v4.12 2017-04-11 16:47:26 +02:00
dwc3 usb: changes for v4.12 2017-04-11 16:47:26 +02:00
early drivers: usb: early: remove unused code 2017-02-08 07:43:47 +01:00
gadget usb: changes for v4.12 2017-04-11 16:47:26 +02:00
host usb: host: xhci-plat: set resume_quirk() for R-Car controllers 2017-04-19 19:59:17 +02:00
image sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
isp1760 usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW 2017-03-17 13:16:56 +09:00
misc usb: misc: refactor code 2017-04-08 12:04:42 +02:00
mon sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
mtu3 usb: mtu3: Replace the extcon API 2017-04-11 10:58:21 +03:00
musb usb: musb: musb_cppi41: Workaround DMA stall issue during teardown 2017-04-18 16:48:26 +02:00
phy usb: changes for v4.12 2017-04-11 16:47:26 +02:00
renesas_usbhs usb: renesas_usbhs: Replace the deprecated extcon API 2017-01-24 11:04:14 +02:00
serial USB: serial: qcserial: add Dell DW5811e 2017-03-18 09:57:14 +01:00
storage usb: fix some references for /proc/bus/usb 2017-04-18 16:54:19 +02:00
typec usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY 2017-03-23 13:48:44 +01:00
usbip usb: usbip: Remove unnecessary get_vdev() 2017-04-08 12:04:42 +02:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-14 17:07:30 +08:00
Kconfig usb: USB Type-C connector class 2017-03-23 13:48:44 +01:00
Makefile usb: USB Type-C connector class 2017-03-23 13:48:44 +01:00
README
usb-skeleton.c USB: usb-skeleton: refactor endpoint retrieval 2017-03-23 13:54:08 +01:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.