![Marc Kleine-Budde](/assets/img/avatar_default.png)
There is no guarantee that the skb is in the same state after calling net_receive_skb() or netif_rx(). It might be freed or reused. Not really harmful as its a read access, except you turn on the proper debugging options which catch a use after free. Cc: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
1753 lines
50 KiB
C
1753 lines
50 KiB
C
/*
|
|
* Socket CAN driver for Aeroflex Gaisler GRCAN and GRHCAN.
|
|
*
|
|
* 2012 (c) Aeroflex Gaisler AB
|
|
*
|
|
* This driver supports GRCAN and GRHCAN CAN controllers available in the GRLIB
|
|
* VHDL IP core library.
|
|
*
|
|
* Full documentation of the GRCAN core can be found here:
|
|
* http://www.gaisler.com/products/grlib/grip.pdf
|
|
*
|
|
* See "Documentation/devicetree/bindings/net/can/grcan.txt" for information on
|
|
* open firmware properties.
|
|
*
|
|
* See "Documentation/ABI/testing/sysfs-class-net-grcan" for information on the
|
|
* sysfs interface.
|
|
*
|
|
* See "Documentation/kernel-parameters.txt" for information on the module
|
|
* parameters.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Contributors: Andreas Larsson <andreas@gaisler.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#define DRV_NAME "grcan"
|
|
|
|
#define GRCAN_NAPI_WEIGHT 32
|
|
|
|
#define GRCAN_RESERVE_SIZE(slot1, slot2) (((slot2) - (slot1)) / 4 - 1)
|
|
|
|
struct grcan_registers {
|
|
u32 conf; /* 0x00 */
|
|
u32 stat; /* 0x04 */
|
|
u32 ctrl; /* 0x08 */
|
|
u32 __reserved1[GRCAN_RESERVE_SIZE(0x08, 0x18)];
|
|
u32 smask; /* 0x18 - CanMASK */
|
|
u32 scode; /* 0x1c - CanCODE */
|
|
u32 __reserved2[GRCAN_RESERVE_SIZE(0x1c, 0x100)];
|
|
u32 pimsr; /* 0x100 */
|
|
u32 pimr; /* 0x104 */
|
|
u32 pisr; /* 0x108 */
|
|
u32 pir; /* 0x10C */
|
|
u32 imr; /* 0x110 */
|
|
u32 picr; /* 0x114 */
|
|
u32 __reserved3[GRCAN_RESERVE_SIZE(0x114, 0x200)];
|
|
u32 txctrl; /* 0x200 */
|
|
u32 txaddr; /* 0x204 */
|
|
u32 txsize; /* 0x208 */
|
|
u32 txwr; /* 0x20C */
|
|
u32 txrd; /* 0x210 */
|
|
u32 txirq; /* 0x214 */
|
|
u32 __reserved4[GRCAN_RESERVE_SIZE(0x214, 0x300)];
|
|
u32 rxctrl; /* 0x300 */
|
|
u32 rxaddr; /* 0x304 */
|
|
u32 rxsize; /* 0x308 */
|
|
u32 rxwr; /* 0x30C */
|
|
u32 rxrd; /* 0x310 */
|
|
u32 rxirq; /* 0x314 */
|
|
u32 rxmask; /* 0x318 */
|
|
u32 rxcode; /* 0x31C */
|
|
};
|
|
|
|
#define GRCAN_CONF_ABORT 0x00000001
|
|
#define GRCAN_CONF_ENABLE0 0x00000002
|
|
#define GRCAN_CONF_ENABLE1 0x00000004
|
|
#define GRCAN_CONF_SELECT 0x00000008
|
|
#define GRCAN_CONF_SILENT 0x00000010
|
|
#define GRCAN_CONF_SAM 0x00000020 /* Available in some hardware */
|
|
#define GRCAN_CONF_BPR 0x00000300 /* Note: not BRP */
|
|
#define GRCAN_CONF_RSJ 0x00007000
|
|
#define GRCAN_CONF_PS1 0x00f00000
|
|
#define GRCAN_CONF_PS2 0x000f0000
|
|
#define GRCAN_CONF_SCALER 0xff000000
|
|
#define GRCAN_CONF_OPERATION \
|
|
(GRCAN_CONF_ABORT | GRCAN_CONF_ENABLE0 | GRCAN_CONF_ENABLE1 \
|
|
| GRCAN_CONF_SELECT | GRCAN_CONF_SILENT | GRCAN_CONF_SAM)
|
|
#define GRCAN_CONF_TIMING \
|
|
(GRCAN_CONF_BPR | GRCAN_CONF_RSJ | GRCAN_CONF_PS1 \
|
|
| GRCAN_CONF_PS2 | GRCAN_CONF_SCALER)
|
|
|
|
#define GRCAN_CONF_RSJ_MIN 1
|
|
#define GRCAN_CONF_RSJ_MAX 4
|
|
#define GRCAN_CONF_PS1_MIN 1
|
|
#define GRCAN_CONF_PS1_MAX 15
|
|
#define GRCAN_CONF_PS2_MIN 2
|
|
#define GRCAN_CONF_PS2_MAX 8
|
|
#define GRCAN_CONF_SCALER_MIN 0
|
|
#define GRCAN_CONF_SCALER_MAX 255
|
|
#define GRCAN_CONF_SCALER_INC 1
|
|
|
|
#define GRCAN_CONF_BPR_BIT 8
|
|
#define GRCAN_CONF_RSJ_BIT 12
|
|
#define GRCAN_CONF_PS1_BIT 20
|
|
#define GRCAN_CONF_PS2_BIT 16
|
|
#define GRCAN_CONF_SCALER_BIT 24
|
|
|
|
#define GRCAN_STAT_PASS 0x000001
|
|
#define GRCAN_STAT_OFF 0x000002
|
|
#define GRCAN_STAT_OR 0x000004
|
|
#define GRCAN_STAT_AHBERR 0x000008
|
|
#define GRCAN_STAT_ACTIVE 0x000010
|
|
#define GRCAN_STAT_RXERRCNT 0x00ff00
|
|
#define GRCAN_STAT_TXERRCNT 0xff0000
|
|
|
|
#define GRCAN_STAT_ERRCTR_RELATED (GRCAN_STAT_PASS | GRCAN_STAT_OFF)
|
|
|
|
#define GRCAN_STAT_RXERRCNT_BIT 8
|
|
#define GRCAN_STAT_TXERRCNT_BIT 16
|
|
|
|
#define GRCAN_STAT_ERRCNT_WARNING_LIMIT 96
|
|
#define GRCAN_STAT_ERRCNT_PASSIVE_LIMIT 127
|
|
|
|
#define GRCAN_CTRL_RESET 0x2
|
|
#define GRCAN_CTRL_ENABLE 0x1
|
|
|
|
#define GRCAN_TXCTRL_ENABLE 0x1
|
|
#define GRCAN_TXCTRL_ONGOING 0x2
|
|
#define GRCAN_TXCTRL_SINGLE 0x4
|
|
|
|
#define GRCAN_RXCTRL_ENABLE 0x1
|
|
#define GRCAN_RXCTRL_ONGOING 0x2
|
|
|
|
/* Relative offset of IRQ sources to AMBA Plug&Play */
|
|
#define GRCAN_IRQIX_IRQ 0
|
|
#define GRCAN_IRQIX_TXSYNC 1
|
|
#define GRCAN_IRQIX_RXSYNC 2
|
|
|
|
#define GRCAN_IRQ_PASS 0x00001
|
|
#define GRCAN_IRQ_OFF 0x00002
|
|
#define GRCAN_IRQ_OR 0x00004
|
|
#define GRCAN_IRQ_RXAHBERR 0x00008
|
|
#define GRCAN_IRQ_TXAHBERR 0x00010
|
|
#define GRCAN_IRQ_RXIRQ 0x00020
|
|
#define GRCAN_IRQ_TXIRQ 0x00040
|
|
#define GRCAN_IRQ_RXFULL 0x00080
|
|
#define GRCAN_IRQ_TXEMPTY 0x00100
|
|
#define GRCAN_IRQ_RX 0x00200
|
|
#define GRCAN_IRQ_TX 0x00400
|
|
#define GRCAN_IRQ_RXSYNC 0x00800
|
|
#define GRCAN_IRQ_TXSYNC 0x01000
|
|
#define GRCAN_IRQ_RXERRCTR 0x02000
|
|
#define GRCAN_IRQ_TXERRCTR 0x04000
|
|
#define GRCAN_IRQ_RXMISS 0x08000
|
|
#define GRCAN_IRQ_TXLOSS 0x10000
|
|
|
|
#define GRCAN_IRQ_NONE 0
|
|
#define GRCAN_IRQ_ALL \
|
|
(GRCAN_IRQ_PASS | GRCAN_IRQ_OFF | GRCAN_IRQ_OR \
|
|
| GRCAN_IRQ_RXAHBERR | GRCAN_IRQ_TXAHBERR \
|
|
| GRCAN_IRQ_RXIRQ | GRCAN_IRQ_TXIRQ \
|
|
| GRCAN_IRQ_RXFULL | GRCAN_IRQ_TXEMPTY \
|
|
| GRCAN_IRQ_RX | GRCAN_IRQ_TX | GRCAN_IRQ_RXSYNC \
|
|
| GRCAN_IRQ_TXSYNC | GRCAN_IRQ_RXERRCTR \
|
|
| GRCAN_IRQ_TXERRCTR | GRCAN_IRQ_RXMISS \
|
|
| GRCAN_IRQ_TXLOSS)
|
|
|
|
#define GRCAN_IRQ_ERRCTR_RELATED (GRCAN_IRQ_RXERRCTR | GRCAN_IRQ_TXERRCTR \
|
|
| GRCAN_IRQ_PASS | GRCAN_IRQ_OFF)
|
|
#define GRCAN_IRQ_ERRORS (GRCAN_IRQ_ERRCTR_RELATED | GRCAN_IRQ_OR \
|
|
| GRCAN_IRQ_TXAHBERR | GRCAN_IRQ_RXAHBERR \
|
|
| GRCAN_IRQ_TXLOSS)
|
|
#define GRCAN_IRQ_DEFAULT (GRCAN_IRQ_RX | GRCAN_IRQ_TX | GRCAN_IRQ_ERRORS)
|
|
|
|
#define GRCAN_MSG_SIZE 16
|
|
|
|
#define GRCAN_MSG_IDE 0x80000000
|
|
#define GRCAN_MSG_RTR 0x40000000
|
|
#define GRCAN_MSG_BID 0x1ffc0000
|
|
#define GRCAN_MSG_EID 0x1fffffff
|
|
#define GRCAN_MSG_IDE_BIT 31
|
|
#define GRCAN_MSG_RTR_BIT 30
|
|
#define GRCAN_MSG_BID_BIT 18
|
|
#define GRCAN_MSG_EID_BIT 0
|
|
|
|
#define GRCAN_MSG_DLC 0xf0000000
|
|
#define GRCAN_MSG_TXERRC 0x00ff0000
|
|
#define GRCAN_MSG_RXERRC 0x0000ff00
|
|
#define GRCAN_MSG_DLC_BIT 28
|
|
#define GRCAN_MSG_TXERRC_BIT 16
|
|
#define GRCAN_MSG_RXERRC_BIT 8
|
|
#define GRCAN_MSG_AHBERR 0x00000008
|
|
#define GRCAN_MSG_OR 0x00000004
|
|
#define GRCAN_MSG_OFF 0x00000002
|
|
#define GRCAN_MSG_PASS 0x00000001
|
|
|
|
#define GRCAN_MSG_DATA_SLOT_INDEX(i) (2 + (i) / 4)
|
|
#define GRCAN_MSG_DATA_SHIFT(i) ((3 - (i) % 4) * 8)
|
|
|
|
#define GRCAN_BUFFER_ALIGNMENT 1024
|
|
#define GRCAN_DEFAULT_BUFFER_SIZE 1024
|
|
#define GRCAN_VALID_TR_SIZE_MASK 0x001fffc0
|
|
|
|
#define GRCAN_INVALID_BUFFER_SIZE(s) \
|
|
((s) == 0 || ((s) & ~GRCAN_VALID_TR_SIZE_MASK))
|
|
|
|
#if GRCAN_INVALID_BUFFER_SIZE(GRCAN_DEFAULT_BUFFER_SIZE)
|
|
#error "Invalid default buffer size"
|
|
#endif
|
|
|
|
struct grcan_dma_buffer {
|
|
size_t size;
|
|
void *buf;
|
|
dma_addr_t handle;
|
|
};
|
|
|
|
struct grcan_dma {
|
|
size_t base_size;
|
|
void *base_buf;
|
|
dma_addr_t base_handle;
|
|
struct grcan_dma_buffer tx;
|
|
struct grcan_dma_buffer rx;
|
|
};
|
|
|
|
/* GRCAN configuration parameters */
|
|
struct grcan_device_config {
|
|
unsigned short enable0;
|
|
unsigned short enable1;
|
|
unsigned short select;
|
|
unsigned int txsize;
|
|
unsigned int rxsize;
|
|
};
|
|
|
|
#define GRCAN_DEFAULT_DEVICE_CONFIG { \
|
|
.enable0 = 0, \
|
|
.enable1 = 0, \
|
|
.select = 0, \
|
|
.txsize = GRCAN_DEFAULT_BUFFER_SIZE, \
|
|
.rxsize = GRCAN_DEFAULT_BUFFER_SIZE, \
|
|
}
|
|
|
|
#define GRCAN_TXBUG_SAFE_GRLIB_VERSION 0x4100
|
|
#define GRLIB_VERSION_MASK 0xffff
|
|
|
|
/* GRCAN private data structure */
|
|
struct grcan_priv {
|
|
struct can_priv can; /* must be the first member */
|
|
struct net_device *dev;
|
|
struct napi_struct napi;
|
|
|
|
struct grcan_registers __iomem *regs; /* ioremap'ed registers */
|
|
struct grcan_device_config config;
|
|
struct grcan_dma dma;
|
|
|
|
struct sk_buff **echo_skb; /* We allocate this on our own */
|
|
u8 *txdlc; /* Length of queued frames */
|
|
|
|
/* The echo skb pointer, pointing into echo_skb and indicating which
|
|
* frames can be echoed back. See the "Notes on the tx cyclic buffer
|
|
* handling"-comment for grcan_start_xmit for more details.
|
|
*/
|
|
u32 eskbp;
|
|
|
|
/* Lock for controlling changes to the netif tx queue state, accesses to
|
|
* the echo_skb pointer eskbp and for making sure that a running reset
|
|
* and/or a close of the interface is done without interference from
|
|
* other parts of the code.
|
|
*
|
|
* The echo_skb pointer, eskbp, should only be accessed under this lock
|
|
* as it can be changed in several places and together with decisions on
|
|
* whether to wake up the tx queue.
|
|
*
|
|
* The tx queue must never be woken up if there is a running reset or
|
|
* close in progress.
|
|
*
|
|
* A running reset (see below on need_txbug_workaround) should never be
|
|
* done if the interface is closing down and several running resets
|
|
* should never be scheduled simultaneously.
|
|
*/
|
|
spinlock_t lock;
|
|
|
|
/* Whether a workaround is needed due to a bug in older hardware. In
|
|
* this case, the driver both tries to prevent the bug from being
|
|
* triggered and recovers, if the bug nevertheless happens, by doing a
|
|
* running reset. A running reset, resets the device and continues from
|
|
* where it were without being noticeable from outside the driver (apart
|
|
* from slight delays).
|
|
*/
|
|
bool need_txbug_workaround;
|
|
|
|
/* To trigger initization of running reset and to trigger running reset
|
|
* respectively in the case of a hanged device due to a txbug.
|
|
*/
|
|
struct timer_list hang_timer;
|
|
struct timer_list rr_timer;
|
|
|
|
/* To avoid waking up the netif queue and restarting timers
|
|
* when a reset is scheduled or when closing of the device is
|
|
* undergoing
|
|
*/
|
|
bool resetting;
|
|
bool closing;
|
|
};
|
|
|
|
/* Wait time for a short wait for ongoing to clear */
|
|
#define GRCAN_SHORTWAIT_USECS 10
|
|
|
|
/* Limit on the number of transmitted bits of an eff frame according to the CAN
|
|
* specification: 1 bit start of frame, 32 bits arbitration field, 6 bits
|
|
* control field, 8 bytes data field, 16 bits crc field, 2 bits ACK field and 7
|
|
* bits end of frame
|
|
*/
|
|
#define GRCAN_EFF_FRAME_MAX_BITS (1+32+6+8*8+16+2+7)
|
|
|
|
#if defined(__BIG_ENDIAN)
|
|
static inline u32 grcan_read_reg(u32 __iomem *reg)
|
|
{
|
|
return ioread32be(reg);
|
|
}
|
|
|
|
static inline void grcan_write_reg(u32 __iomem *reg, u32 val)
|
|
{
|
|
iowrite32be(val, reg);
|
|
}
|
|
#else
|
|
static inline u32 grcan_read_reg(u32 __iomem *reg)
|
|
{
|
|
return ioread32(reg);
|
|
}
|
|
|
|
static inline void grcan_write_reg(u32 __iomem *reg, u32 val)
|
|
{
|
|
iowrite32(val, reg);
|
|
}
|
|
#endif
|
|
|
|
static inline void grcan_clear_bits(u32 __iomem *reg, u32 mask)
|
|
{
|
|
grcan_write_reg(reg, grcan_read_reg(reg) & ~mask);
|
|
}
|
|
|
|
static inline void grcan_set_bits(u32 __iomem *reg, u32 mask)
|
|
{
|
|
grcan_write_reg(reg, grcan_read_reg(reg) | mask);
|
|
}
|
|
|
|
static inline u32 grcan_read_bits(u32 __iomem *reg, u32 mask)
|
|
{
|
|
return grcan_read_reg(reg) & mask;
|
|
}
|
|
|
|
static inline void grcan_write_bits(u32 __iomem *reg, u32 value, u32 mask)
|
|
{
|
|
u32 old = grcan_read_reg(reg);
|
|
|
|
grcan_write_reg(reg, (old & ~mask) | (value & mask));
|
|
}
|
|
|
|
/* a and b should both be in [0,size] and a == b == size should not hold */
|
|
static inline u32 grcan_ring_add(u32 a, u32 b, u32 size)
|
|
{
|
|
u32 sum = a + b;
|
|
|
|
if (sum < size)
|
|
return sum;
|
|
else
|
|
return sum - size;
|
|
}
|
|
|
|
/* a and b should both be in [0,size) */
|
|
static inline u32 grcan_ring_sub(u32 a, u32 b, u32 size)
|
|
{
|
|
return grcan_ring_add(a, size - b, size);
|
|
}
|
|
|
|
/* Available slots for new transmissions */
|
|
static inline u32 grcan_txspace(size_t txsize, u32 txwr, u32 eskbp)
|
|
{
|
|
u32 slots = txsize / GRCAN_MSG_SIZE - 1;
|
|
u32 used = grcan_ring_sub(txwr, eskbp, txsize) / GRCAN_MSG_SIZE;
|
|
|
|
return slots - used;
|
|
}
|
|
|
|
/* Configuration parameters that can be set via module parameters */
|
|
static struct grcan_device_config grcan_module_config =
|
|
GRCAN_DEFAULT_DEVICE_CONFIG;
|
|
|
|
static const struct can_bittiming_const grcan_bittiming_const = {
|
|
.name = DRV_NAME,
|
|
.tseg1_min = GRCAN_CONF_PS1_MIN + 1,
|
|
.tseg1_max = GRCAN_CONF_PS1_MAX + 1,
|
|
.tseg2_min = GRCAN_CONF_PS2_MIN,
|
|
.tseg2_max = GRCAN_CONF_PS2_MAX,
|
|
.sjw_max = GRCAN_CONF_RSJ_MAX,
|
|
.brp_min = GRCAN_CONF_SCALER_MIN + 1,
|
|
.brp_max = GRCAN_CONF_SCALER_MAX + 1,
|
|
.brp_inc = GRCAN_CONF_SCALER_INC,
|
|
};
|
|
|
|
static int grcan_set_bittiming(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
struct can_bittiming *bt = &priv->can.bittiming;
|
|
u32 timing = 0;
|
|
int bpr, rsj, ps1, ps2, scaler;
|
|
|
|
/* Should never happen - function will not be called when
|
|
* device is up
|
|
*/
|
|
if (grcan_read_bits(®s->ctrl, GRCAN_CTRL_ENABLE))
|
|
return -EBUSY;
|
|
|
|
bpr = 0; /* Note bpr and brp are different concepts */
|
|
rsj = bt->sjw;
|
|
ps1 = (bt->prop_seg + bt->phase_seg1) - 1; /* tseg1 - 1 */
|
|
ps2 = bt->phase_seg2;
|
|
scaler = (bt->brp - 1);
|
|
netdev_dbg(dev, "Request for BPR=%d, RSJ=%d, PS1=%d, PS2=%d, SCALER=%d",
|
|
bpr, rsj, ps1, ps2, scaler);
|
|
if (!(ps1 > ps2)) {
|
|
netdev_err(dev, "PS1 > PS2 must hold: PS1=%d, PS2=%d\n",
|
|
ps1, ps2);
|
|
return -EINVAL;
|
|
}
|
|
if (!(ps2 >= rsj)) {
|
|
netdev_err(dev, "PS2 >= RSJ must hold: PS2=%d, RSJ=%d\n",
|
|
ps2, rsj);
|
|
return -EINVAL;
|
|
}
|
|
|
|
timing |= (bpr << GRCAN_CONF_BPR_BIT) & GRCAN_CONF_BPR;
|
|
timing |= (rsj << GRCAN_CONF_RSJ_BIT) & GRCAN_CONF_RSJ;
|
|
timing |= (ps1 << GRCAN_CONF_PS1_BIT) & GRCAN_CONF_PS1;
|
|
timing |= (ps2 << GRCAN_CONF_PS2_BIT) & GRCAN_CONF_PS2;
|
|
timing |= (scaler << GRCAN_CONF_SCALER_BIT) & GRCAN_CONF_SCALER;
|
|
netdev_info(dev, "setting timing=0x%x\n", timing);
|
|
grcan_write_bits(®s->conf, timing, GRCAN_CONF_TIMING);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int grcan_get_berr_counter(const struct net_device *dev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
u32 status = grcan_read_reg(®s->stat);
|
|
|
|
bec->txerr = (status & GRCAN_STAT_TXERRCNT) >> GRCAN_STAT_TXERRCNT_BIT;
|
|
bec->rxerr = (status & GRCAN_STAT_RXERRCNT) >> GRCAN_STAT_RXERRCNT_BIT;
|
|
return 0;
|
|
}
|
|
|
|
static int grcan_poll(struct napi_struct *napi, int budget);
|
|
|
|
/* Reset device, but keep configuration information */
|
|
static void grcan_reset(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
u32 config = grcan_read_reg(®s->conf);
|
|
|
|
grcan_set_bits(®s->ctrl, GRCAN_CTRL_RESET);
|
|
grcan_write_reg(®s->conf, config);
|
|
|
|
priv->eskbp = grcan_read_reg(®s->txrd);
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
/* Turn off hardware filtering - regs->rxcode set to 0 by reset */
|
|
grcan_write_reg(®s->rxmask, 0);
|
|
}
|
|
|
|
/* stop device without changing any configurations */
|
|
static void grcan_stop_hardware(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
|
|
grcan_write_reg(®s->imr, GRCAN_IRQ_NONE);
|
|
grcan_clear_bits(®s->txctrl, GRCAN_TXCTRL_ENABLE);
|
|
grcan_clear_bits(®s->rxctrl, GRCAN_RXCTRL_ENABLE);
|
|
grcan_clear_bits(®s->ctrl, GRCAN_CTRL_ENABLE);
|
|
}
|
|
|
|
/* Let priv->eskbp catch up to regs->txrd and echo back the skbs if echo
|
|
* is true and free them otherwise.
|
|
*
|
|
* If budget is >= 0, stop after handling at most budget skbs. Otherwise,
|
|
* continue until priv->eskbp catches up to regs->txrd.
|
|
*
|
|
* priv->lock *must* be held when calling this function
|
|
*/
|
|
static int catch_up_echo_skb(struct net_device *dev, int budget, bool echo)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
struct grcan_dma *dma = &priv->dma;
|
|
struct net_device_stats *stats = &dev->stats;
|
|
int i, work_done;
|
|
|
|
/* Updates to priv->eskbp and wake-ups of the queue needs to
|
|
* be atomic towards the reads of priv->eskbp and shut-downs
|
|
* of the queue in grcan_start_xmit.
|
|
*/
|
|
u32 txrd = grcan_read_reg(®s->txrd);
|
|
|
|
for (work_done = 0; work_done < budget || budget < 0; work_done++) {
|
|
if (priv->eskbp == txrd)
|
|
break;
|
|
i = priv->eskbp / GRCAN_MSG_SIZE;
|
|
if (echo) {
|
|
/* Normal echo of messages */
|
|
stats->tx_packets++;
|
|
stats->tx_bytes += priv->txdlc[i];
|
|
priv->txdlc[i] = 0;
|
|
can_get_echo_skb(dev, i);
|
|
} else {
|
|
/* For cleanup of untransmitted messages */
|
|
can_free_echo_skb(dev, i);
|
|
}
|
|
|
|
priv->eskbp = grcan_ring_add(priv->eskbp, GRCAN_MSG_SIZE,
|
|
dma->tx.size);
|
|
txrd = grcan_read_reg(®s->txrd);
|
|
}
|
|
return work_done;
|
|
}
|
|
|
|
static void grcan_lost_one_shot_frame(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
struct grcan_dma *dma = &priv->dma;
|
|
u32 txrd;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
catch_up_echo_skb(dev, -1, true);
|
|
|
|
if (unlikely(grcan_read_bits(®s->txctrl, GRCAN_TXCTRL_ENABLE))) {
|
|
/* Should never happen */
|
|
netdev_err(dev, "TXCTRL enabled at TXLOSS in one shot mode\n");
|
|
} else {
|
|
/* By the time an GRCAN_IRQ_TXLOSS is generated in
|
|
* one-shot mode there is no problem in writing
|
|
* to TXRD even in versions of the hardware in
|
|
* which GRCAN_TXCTRL_ONGOING is not cleared properly
|
|
* in one-shot mode.
|
|
*/
|
|
|
|
/* Skip message and discard echo-skb */
|
|
txrd = grcan_read_reg(®s->txrd);
|
|
txrd = grcan_ring_add(txrd, GRCAN_MSG_SIZE, dma->tx.size);
|
|
grcan_write_reg(®s->txrd, txrd);
|
|
catch_up_echo_skb(dev, -1, false);
|
|
|
|
if (!priv->resetting && !priv->closing &&
|
|
!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) {
|
|
netif_wake_queue(dev);
|
|
grcan_set_bits(®s->txctrl, GRCAN_TXCTRL_ENABLE);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static void grcan_err(struct net_device *dev, u32 sources, u32 status)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
struct grcan_dma *dma = &priv->dma;
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame cf;
|
|
|
|
/* Zero potential error_frame */
|
|
memset(&cf, 0, sizeof(cf));
|
|
|
|
/* Message lost interrupt. This might be due to arbitration error, but
|
|
* is also triggered when there is no one else on the can bus or when
|
|
* there is a problem with the hardware interface or the bus itself. As
|
|
* arbitration errors can not be singled out, no error frames are
|
|
* generated reporting this event as an arbitration error.
|
|
*/
|
|
if (sources & GRCAN_IRQ_TXLOSS) {
|
|
/* Take care of failed one-shot transmit */
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
|
|
grcan_lost_one_shot_frame(dev);
|
|
|
|
/* Stop printing as soon as error passive or bus off is in
|
|
* effect to limit the amount of txloss debug printouts.
|
|
*/
|
|
if (!(status & GRCAN_STAT_ERRCTR_RELATED)) {
|
|
netdev_dbg(dev, "tx message lost\n");
|
|
stats->tx_errors++;
|
|
}
|
|
}
|
|
|
|
/* Conditions dealing with the error counters. There is no interrupt for
|
|
* error warning, but there are interrupts for increases of the error
|
|
* counters.
|
|
*/
|
|
if ((sources & GRCAN_IRQ_ERRCTR_RELATED) ||
|
|
(status & GRCAN_STAT_ERRCTR_RELATED)) {
|
|
enum can_state state = priv->can.state;
|
|
enum can_state oldstate = state;
|
|
u32 txerr = (status & GRCAN_STAT_TXERRCNT)
|
|
>> GRCAN_STAT_TXERRCNT_BIT;
|
|
u32 rxerr = (status & GRCAN_STAT_RXERRCNT)
|
|
>> GRCAN_STAT_RXERRCNT_BIT;
|
|
|
|
/* Figure out current state */
|
|
if (status & GRCAN_STAT_OFF) {
|
|
state = CAN_STATE_BUS_OFF;
|
|
} else if (status & GRCAN_STAT_PASS) {
|
|
state = CAN_STATE_ERROR_PASSIVE;
|
|
} else if (txerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT ||
|
|
rxerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT) {
|
|
state = CAN_STATE_ERROR_WARNING;
|
|
} else {
|
|
state = CAN_STATE_ERROR_ACTIVE;
|
|
}
|
|
|
|
/* Handle and report state changes */
|
|
if (state != oldstate) {
|
|
switch (state) {
|
|
case CAN_STATE_BUS_OFF:
|
|
netdev_dbg(dev, "bus-off\n");
|
|
netif_carrier_off(dev);
|
|
priv->can.can_stats.bus_off++;
|
|
|
|
/* Prevent the hardware from recovering from bus
|
|
* off on its own if restart is disabled.
|
|
*/
|
|
if (!priv->can.restart_ms)
|
|
grcan_stop_hardware(dev);
|
|
|
|
cf.can_id |= CAN_ERR_BUSOFF;
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_PASSIVE:
|
|
netdev_dbg(dev, "Error passive condition\n");
|
|
priv->can.can_stats.error_passive++;
|
|
|
|
cf.can_id |= CAN_ERR_CRTL;
|
|
if (txerr >= GRCAN_STAT_ERRCNT_PASSIVE_LIMIT)
|
|
cf.data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
|
|
if (rxerr >= GRCAN_STAT_ERRCNT_PASSIVE_LIMIT)
|
|
cf.data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_WARNING:
|
|
netdev_dbg(dev, "Error warning condition\n");
|
|
priv->can.can_stats.error_warning++;
|
|
|
|
cf.can_id |= CAN_ERR_CRTL;
|
|
if (txerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT)
|
|
cf.data[1] |= CAN_ERR_CRTL_TX_WARNING;
|
|
if (rxerr >= GRCAN_STAT_ERRCNT_WARNING_LIMIT)
|
|
cf.data[1] |= CAN_ERR_CRTL_RX_WARNING;
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_ACTIVE:
|
|
netdev_dbg(dev, "Error active condition\n");
|
|
cf.can_id |= CAN_ERR_CRTL;
|
|
break;
|
|
|
|
default:
|
|
/* There are no others at this point */
|
|
break;
|
|
}
|
|
cf.data[6] = txerr;
|
|
cf.data[7] = rxerr;
|
|
priv->can.state = state;
|
|
}
|
|
|
|
/* Report automatic restarts */
|
|
if (priv->can.restart_ms && oldstate == CAN_STATE_BUS_OFF) {
|
|
unsigned long flags;
|
|
|
|
cf.can_id |= CAN_ERR_RESTARTED;
|
|
netdev_dbg(dev, "restarted\n");
|
|
priv->can.can_stats.restarts++;
|
|
netif_carrier_on(dev);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
if (!priv->resetting && !priv->closing) {
|
|
u32 txwr = grcan_read_reg(®s->txwr);
|
|
|
|
if (grcan_txspace(dma->tx.size, txwr,
|
|
priv->eskbp))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
}
|
|
|
|
/* Data overrun interrupt */
|
|
if ((sources & GRCAN_IRQ_OR) || (status & GRCAN_STAT_OR)) {
|
|
netdev_dbg(dev, "got data overrun interrupt\n");
|
|
stats->rx_over_errors++;
|
|
stats->rx_errors++;
|
|
|
|
cf.can_id |= CAN_ERR_CRTL;
|
|
cf.data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
|
|
}
|
|
|
|
/* AHB bus error interrupts (not CAN bus errors) - shut down the
|
|
* device.
|
|
*/
|
|
if (sources & (GRCAN_IRQ_TXAHBERR | GRCAN_IRQ_RXAHBERR) ||
|
|
(status & GRCAN_STAT_AHBERR)) {
|
|
char *txrx = "";
|
|
unsigned long flags;
|
|
|
|
if (sources & GRCAN_IRQ_TXAHBERR) {
|
|
txrx = "on tx ";
|
|
stats->tx_errors++;
|
|
} else if (sources & GRCAN_IRQ_RXAHBERR) {
|
|
txrx = "on rx ";
|
|
stats->rx_errors++;
|
|
}
|
|
netdev_err(dev, "Fatal AHB buss error %s- halting device\n",
|
|
txrx);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* Prevent anything to be enabled again and halt device */
|
|
priv->closing = true;
|
|
netif_stop_queue(dev);
|
|
grcan_stop_hardware(dev);
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
/* Pass on error frame if something to report,
|
|
* i.e. id contains some information
|
|
*/
|
|
if (cf.can_id) {
|
|
struct can_frame *skb_cf;
|
|
struct sk_buff *skb = alloc_can_err_skb(dev, &skb_cf);
|
|
|
|
if (skb == NULL) {
|
|
netdev_dbg(dev, "could not allocate error frame\n");
|
|
return;
|
|
}
|
|
skb_cf->can_id |= cf.can_id;
|
|
memcpy(skb_cf->data, cf.data, sizeof(cf.data));
|
|
|
|
netif_rx(skb);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t grcan_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
u32 sources, status;
|
|
|
|
/* Find out the source */
|
|
sources = grcan_read_reg(®s->pimsr);
|
|
if (!sources)
|
|
return IRQ_NONE;
|
|
grcan_write_reg(®s->picr, sources);
|
|
status = grcan_read_reg(®s->stat);
|
|
|
|
/* If we got TX progress, the device has not hanged,
|
|
* so disable the hang timer
|
|
*/
|
|
if (priv->need_txbug_workaround &&
|
|
(sources & (GRCAN_IRQ_TX | GRCAN_IRQ_TXLOSS))) {
|
|
del_timer(&priv->hang_timer);
|
|
}
|
|
|
|
/* Frame(s) received or transmitted */
|
|
if (sources & (GRCAN_IRQ_TX | GRCAN_IRQ_RX)) {
|
|
/* Disable tx/rx interrupts and schedule poll(). No need for
|
|
* locking as interference from a running reset at worst leads
|
|
* to an extra interrupt.
|
|
*/
|
|
grcan_clear_bits(®s->imr, GRCAN_IRQ_TX | GRCAN_IRQ_RX);
|
|
napi_schedule(&priv->napi);
|
|
}
|
|
|
|
/* (Potential) error conditions to take care of */
|
|
if (sources & GRCAN_IRQ_ERRORS)
|
|
grcan_err(dev, sources, status);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Reset device and restart operations from where they were.
|
|
*
|
|
* This assumes that RXCTRL & RXCTRL is properly disabled and that RX
|
|
* is not ONGOING (TX might be stuck in ONGOING due to a harwrware bug
|
|
* for single shot)
|
|
*/
|
|
static void grcan_running_reset(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
unsigned long flags;
|
|
|
|
/* This temporarily messes with eskbp, so we need to lock
|
|
* priv->lock
|
|
*/
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
priv->resetting = false;
|
|
del_timer(&priv->hang_timer);
|
|
del_timer(&priv->rr_timer);
|
|
|
|
if (!priv->closing) {
|
|
/* Save and reset - config register preserved by grcan_reset */
|
|
u32 imr = grcan_read_reg(®s->imr);
|
|
|
|
u32 txaddr = grcan_read_reg(®s->txaddr);
|
|
u32 txsize = grcan_read_reg(®s->txsize);
|
|
u32 txwr = grcan_read_reg(®s->txwr);
|
|
u32 txrd = grcan_read_reg(®s->txrd);
|
|
u32 eskbp = priv->eskbp;
|
|
|
|
u32 rxaddr = grcan_read_reg(®s->rxaddr);
|
|
u32 rxsize = grcan_read_reg(®s->rxsize);
|
|
u32 rxwr = grcan_read_reg(®s->rxwr);
|
|
u32 rxrd = grcan_read_reg(®s->rxrd);
|
|
|
|
grcan_reset(dev);
|
|
|
|
/* Restore */
|
|
grcan_write_reg(®s->txaddr, txaddr);
|
|
grcan_write_reg(®s->txsize, txsize);
|
|
grcan_write_reg(®s->txwr, txwr);
|
|
grcan_write_reg(®s->txrd, txrd);
|
|
priv->eskbp = eskbp;
|
|
|
|
grcan_write_reg(®s->rxaddr, rxaddr);
|
|
grcan_write_reg(®s->rxsize, rxsize);
|
|
grcan_write_reg(®s->rxwr, rxwr);
|
|
grcan_write_reg(®s->rxrd, rxrd);
|
|
|
|
/* Turn on device again */
|
|
grcan_write_reg(®s->imr, imr);
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
grcan_write_reg(®s->txctrl, GRCAN_TXCTRL_ENABLE
|
|
| (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT
|
|
? GRCAN_TXCTRL_SINGLE : 0));
|
|
grcan_write_reg(®s->rxctrl, GRCAN_RXCTRL_ENABLE);
|
|
grcan_write_reg(®s->ctrl, GRCAN_CTRL_ENABLE);
|
|
|
|
/* Start queue if there is size and listen-onle mode is not
|
|
* enabled
|
|
*/
|
|
if (grcan_txspace(priv->dma.tx.size, txwr, priv->eskbp) &&
|
|
!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
netdev_err(dev, "Device reset and restored\n");
|
|
}
|
|
|
|
/* Waiting time in usecs corresponding to the transmission of three maximum
|
|
* sized can frames in the given bitrate (in bits/sec). Waiting for this amount
|
|
* of time makes sure that the can controller have time to finish sending or
|
|
* receiving a frame with a good margin.
|
|
*
|
|
* usecs/sec * number of frames * bits/frame / bits/sec
|
|
*/
|
|
static inline u32 grcan_ongoing_wait_usecs(__u32 bitrate)
|
|
{
|
|
return 1000000 * 3 * GRCAN_EFF_FRAME_MAX_BITS / bitrate;
|
|
}
|
|
|
|
/* Set timer so that it will not fire until after a period in which the can
|
|
* controller have a good margin to finish transmitting a frame unless it has
|
|
* hanged
|
|
*/
|
|
static inline void grcan_reset_timer(struct timer_list *timer, __u32 bitrate)
|
|
{
|
|
u32 wait_jiffies = usecs_to_jiffies(grcan_ongoing_wait_usecs(bitrate));
|
|
|
|
mod_timer(timer, jiffies + wait_jiffies);
|
|
}
|
|
|
|
/* Disable channels and schedule a running reset */
|
|
static void grcan_initiate_running_reset(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
unsigned long flags;
|
|
|
|
netdev_err(dev, "Device seems hanged - reset scheduled\n");
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* The main body of this function must never be executed again
|
|
* until after an execution of grcan_running_reset
|
|
*/
|
|
if (!priv->resetting && !priv->closing) {
|
|
priv->resetting = true;
|
|
netif_stop_queue(dev);
|
|
grcan_clear_bits(®s->txctrl, GRCAN_TXCTRL_ENABLE);
|
|
grcan_clear_bits(®s->rxctrl, GRCAN_RXCTRL_ENABLE);
|
|
grcan_reset_timer(&priv->rr_timer, priv->can.bittiming.bitrate);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static void grcan_free_dma_buffers(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_dma *dma = &priv->dma;
|
|
|
|
dma_free_coherent(&dev->dev, dma->base_size, dma->base_buf,
|
|
dma->base_handle);
|
|
memset(dma, 0, sizeof(*dma));
|
|
}
|
|
|
|
static int grcan_allocate_dma_buffers(struct net_device *dev,
|
|
size_t tsize, size_t rsize)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_dma *dma = &priv->dma;
|
|
struct grcan_dma_buffer *large = rsize > tsize ? &dma->rx : &dma->tx;
|
|
struct grcan_dma_buffer *small = rsize > tsize ? &dma->tx : &dma->rx;
|
|
size_t shift;
|
|
|
|
/* Need a whole number of GRCAN_BUFFER_ALIGNMENT for the large,
|
|
* i.e. first buffer
|
|
*/
|
|
size_t maxs = max(tsize, rsize);
|
|
size_t lsize = ALIGN(maxs, GRCAN_BUFFER_ALIGNMENT);
|
|
|
|
/* Put the small buffer after that */
|
|
size_t ssize = min(tsize, rsize);
|
|
|
|
/* Extra GRCAN_BUFFER_ALIGNMENT to allow for alignment */
|
|
dma->base_size = lsize + ssize + GRCAN_BUFFER_ALIGNMENT;
|
|
dma->base_buf = dma_alloc_coherent(&dev->dev,
|
|
dma->base_size,
|
|
&dma->base_handle,
|
|
GFP_KERNEL);
|
|
|
|
if (!dma->base_buf)
|
|
return -ENOMEM;
|
|
|
|
dma->tx.size = tsize;
|
|
dma->rx.size = rsize;
|
|
|
|
large->handle = ALIGN(dma->base_handle, GRCAN_BUFFER_ALIGNMENT);
|
|
small->handle = large->handle + lsize;
|
|
shift = large->handle - dma->base_handle;
|
|
|
|
large->buf = dma->base_buf + shift;
|
|
small->buf = large->buf + lsize;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* priv->lock *must* be held when calling this function */
|
|
static int grcan_start(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
u32 confop, txctrl;
|
|
|
|
grcan_reset(dev);
|
|
|
|
grcan_write_reg(®s->txaddr, priv->dma.tx.handle);
|
|
grcan_write_reg(®s->txsize, priv->dma.tx.size);
|
|
/* regs->txwr, regs->txrd and priv->eskbp already set to 0 by reset */
|
|
|
|
grcan_write_reg(®s->rxaddr, priv->dma.rx.handle);
|
|
grcan_write_reg(®s->rxsize, priv->dma.rx.size);
|
|
/* regs->rxwr and regs->rxrd already set to 0 by reset */
|
|
|
|
/* Enable interrupts */
|
|
grcan_read_reg(®s->pir);
|
|
grcan_write_reg(®s->imr, GRCAN_IRQ_DEFAULT);
|
|
|
|
/* Enable interfaces, channels and device */
|
|
confop = GRCAN_CONF_ABORT
|
|
| (priv->config.enable0 ? GRCAN_CONF_ENABLE0 : 0)
|
|
| (priv->config.enable1 ? GRCAN_CONF_ENABLE1 : 0)
|
|
| (priv->config.select ? GRCAN_CONF_SELECT : 0)
|
|
| (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY ?
|
|
GRCAN_CONF_SILENT : 0)
|
|
| (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES ?
|
|
GRCAN_CONF_SAM : 0);
|
|
grcan_write_bits(®s->conf, confop, GRCAN_CONF_OPERATION);
|
|
txctrl = GRCAN_TXCTRL_ENABLE
|
|
| (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT
|
|
? GRCAN_TXCTRL_SINGLE : 0);
|
|
grcan_write_reg(®s->txctrl, txctrl);
|
|
grcan_write_reg(®s->rxctrl, GRCAN_RXCTRL_ENABLE);
|
|
grcan_write_reg(®s->ctrl, GRCAN_CTRL_ENABLE);
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int grcan_set_mode(struct net_device *dev, enum can_mode mode)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
int err = 0;
|
|
|
|
if (mode == CAN_MODE_START) {
|
|
/* This might be called to restart the device to recover from
|
|
* bus off errors
|
|
*/
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (priv->closing || priv->resetting) {
|
|
err = -EBUSY;
|
|
} else {
|
|
netdev_info(dev, "Restarting device\n");
|
|
grcan_start(dev);
|
|
if (!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
|
|
netif_wake_queue(dev);
|
|
}
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return err;
|
|
}
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int grcan_open(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_dma *dma = &priv->dma;
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
/* Allocate memory */
|
|
err = grcan_allocate_dma_buffers(dev, priv->config.txsize,
|
|
priv->config.rxsize);
|
|
if (err) {
|
|
netdev_err(dev, "could not allocate DMA buffers\n");
|
|
return err;
|
|
}
|
|
|
|
priv->echo_skb = kzalloc(dma->tx.size * sizeof(*priv->echo_skb),
|
|
GFP_KERNEL);
|
|
if (!priv->echo_skb) {
|
|
err = -ENOMEM;
|
|
goto exit_free_dma_buffers;
|
|
}
|
|
priv->can.echo_skb_max = dma->tx.size;
|
|
priv->can.echo_skb = priv->echo_skb;
|
|
|
|
priv->txdlc = kzalloc(dma->tx.size * sizeof(*priv->txdlc), GFP_KERNEL);
|
|
if (!priv->txdlc) {
|
|
err = -ENOMEM;
|
|
goto exit_free_echo_skb;
|
|
}
|
|
|
|
/* Get can device up */
|
|
err = open_candev(dev);
|
|
if (err)
|
|
goto exit_free_txdlc;
|
|
|
|
err = request_irq(dev->irq, grcan_interrupt, IRQF_SHARED,
|
|
dev->name, dev);
|
|
if (err)
|
|
goto exit_close_candev;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
napi_enable(&priv->napi);
|
|
grcan_start(dev);
|
|
if (!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
|
|
netif_start_queue(dev);
|
|
priv->resetting = false;
|
|
priv->closing = false;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
|
|
exit_close_candev:
|
|
close_candev(dev);
|
|
exit_free_txdlc:
|
|
kfree(priv->txdlc);
|
|
exit_free_echo_skb:
|
|
kfree(priv->echo_skb);
|
|
exit_free_dma_buffers:
|
|
grcan_free_dma_buffers(dev);
|
|
return err;
|
|
}
|
|
|
|
static int grcan_close(struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
napi_disable(&priv->napi);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
priv->closing = true;
|
|
if (priv->need_txbug_workaround) {
|
|
del_timer_sync(&priv->hang_timer);
|
|
del_timer_sync(&priv->rr_timer);
|
|
}
|
|
netif_stop_queue(dev);
|
|
grcan_stop_hardware(dev);
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
free_irq(dev->irq, dev);
|
|
close_candev(dev);
|
|
|
|
grcan_free_dma_buffers(dev);
|
|
priv->can.echo_skb_max = 0;
|
|
priv->can.echo_skb = NULL;
|
|
kfree(priv->echo_skb);
|
|
kfree(priv->txdlc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int grcan_transmit_catch_up(struct net_device *dev, int budget)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
unsigned long flags;
|
|
int work_done;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
work_done = catch_up_echo_skb(dev, budget, true);
|
|
if (work_done) {
|
|
if (!priv->resetting && !priv->closing &&
|
|
!(priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
|
|
netif_wake_queue(dev);
|
|
|
|
/* With napi we don't get TX interrupts for a while,
|
|
* so prevent a running reset while catching up
|
|
*/
|
|
if (priv->need_txbug_workaround)
|
|
del_timer(&priv->hang_timer);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static int grcan_receive(struct net_device *dev, int budget)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
struct grcan_dma *dma = &priv->dma;
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
u32 wr, rd, startrd;
|
|
u32 *slot;
|
|
u32 i, rtr, eff, j, shift;
|
|
int work_done = 0;
|
|
|
|
rd = grcan_read_reg(®s->rxrd);
|
|
startrd = rd;
|
|
for (work_done = 0; work_done < budget; work_done++) {
|
|
/* Check for packet to receive */
|
|
wr = grcan_read_reg(®s->rxwr);
|
|
if (rd == wr)
|
|
break;
|
|
|
|
/* Take care of packet */
|
|
skb = alloc_can_skb(dev, &cf);
|
|
if (skb == NULL) {
|
|
netdev_err(dev,
|
|
"dropping frame: skb allocation failed\n");
|
|
stats->rx_dropped++;
|
|
continue;
|
|
}
|
|
|
|
slot = dma->rx.buf + rd;
|
|
eff = slot[0] & GRCAN_MSG_IDE;
|
|
rtr = slot[0] & GRCAN_MSG_RTR;
|
|
if (eff) {
|
|
cf->can_id = ((slot[0] & GRCAN_MSG_EID)
|
|
>> GRCAN_MSG_EID_BIT);
|
|
cf->can_id |= CAN_EFF_FLAG;
|
|
} else {
|
|
cf->can_id = ((slot[0] & GRCAN_MSG_BID)
|
|
>> GRCAN_MSG_BID_BIT);
|
|
}
|
|
cf->can_dlc = get_can_dlc((slot[1] & GRCAN_MSG_DLC)
|
|
>> GRCAN_MSG_DLC_BIT);
|
|
if (rtr) {
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
} else {
|
|
for (i = 0; i < cf->can_dlc; i++) {
|
|
j = GRCAN_MSG_DATA_SLOT_INDEX(i);
|
|
shift = GRCAN_MSG_DATA_SHIFT(i);
|
|
cf->data[i] = (u8)(slot[j] >> shift);
|
|
}
|
|
}
|
|
|
|
/* Update statistics and read pointer */
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
netif_receive_skb(skb);
|
|
|
|
rd = grcan_ring_add(rd, GRCAN_MSG_SIZE, dma->rx.size);
|
|
}
|
|
|
|
/* Make sure everything is read before allowing hardware to
|
|
* use the memory
|
|
*/
|
|
mb();
|
|
|
|
/* Update read pointer - no need to check for ongoing */
|
|
if (likely(rd != startrd))
|
|
grcan_write_reg(®s->rxrd, rd);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static int grcan_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct grcan_priv *priv = container_of(napi, struct grcan_priv, napi);
|
|
struct net_device *dev = priv->dev;
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
unsigned long flags;
|
|
int tx_work_done, rx_work_done;
|
|
int rx_budget = budget / 2;
|
|
int tx_budget = budget - rx_budget;
|
|
|
|
/* Half of the budget for receiveing messages */
|
|
rx_work_done = grcan_receive(dev, rx_budget);
|
|
|
|
/* Half of the budget for transmitting messages as that can trigger echo
|
|
* frames being received
|
|
*/
|
|
tx_work_done = grcan_transmit_catch_up(dev, tx_budget);
|
|
|
|
if (rx_work_done < rx_budget && tx_work_done < tx_budget) {
|
|
napi_complete(napi);
|
|
|
|
/* Guarantee no interference with a running reset that otherwise
|
|
* could turn off interrupts.
|
|
*/
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* Enable tx and rx interrupts again. No need to check
|
|
* priv->closing as napi_disable in grcan_close is waiting for
|
|
* scheduled napi calls to finish.
|
|
*/
|
|
grcan_set_bits(®s->imr, GRCAN_IRQ_TX | GRCAN_IRQ_RX);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
return rx_work_done + tx_work_done;
|
|
}
|
|
|
|
/* Work tx bug by waiting while for the risky situation to clear. If that fails,
|
|
* drop a frame in one-shot mode or indicate a busy device otherwise.
|
|
*
|
|
* Returns 0 on successful wait. Otherwise it sets *netdev_tx_status to the
|
|
* value that should be returned by grcan_start_xmit when aborting the xmit.
|
|
*/
|
|
static int grcan_txbug_workaround(struct net_device *dev, struct sk_buff *skb,
|
|
u32 txwr, u32 oneshotmode,
|
|
netdev_tx_t *netdev_tx_status)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
struct grcan_dma *dma = &priv->dma;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
/* Wait a while for ongoing to be cleared or read pointer to catch up to
|
|
* write pointer. The latter is needed due to a bug in older versions of
|
|
* GRCAN in which ONGOING is not cleared properly one-shot mode when a
|
|
* transmission fails.
|
|
*/
|
|
for (i = 0; i < GRCAN_SHORTWAIT_USECS; i++) {
|
|
udelay(1);
|
|
if (!grcan_read_bits(®s->txctrl, GRCAN_TXCTRL_ONGOING) ||
|
|
grcan_read_reg(®s->txrd) == txwr) {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Clean up, in case the situation was not resolved */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (!priv->resetting && !priv->closing) {
|
|
/* Queue might have been stopped earlier in grcan_start_xmit */
|
|
if (grcan_txspace(dma->tx.size, txwr, priv->eskbp))
|
|
netif_wake_queue(dev);
|
|
/* Set a timer to resolve a hanged tx controller */
|
|
if (!timer_pending(&priv->hang_timer))
|
|
grcan_reset_timer(&priv->hang_timer,
|
|
priv->can.bittiming.bitrate);
|
|
}
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if (oneshotmode) {
|
|
/* In one-shot mode we should never end up here because
|
|
* then the interrupt handler increases txrd on TXLOSS,
|
|
* but it is consistent with one-shot mode to drop the
|
|
* frame in this case.
|
|
*/
|
|
kfree_skb(skb);
|
|
*netdev_tx_status = NETDEV_TX_OK;
|
|
} else {
|
|
/* In normal mode the socket-can transmission queue get
|
|
* to keep the frame so that it can be retransmitted
|
|
* later
|
|
*/
|
|
*netdev_tx_status = NETDEV_TX_BUSY;
|
|
}
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Notes on the tx cyclic buffer handling:
|
|
*
|
|
* regs->txwr - the next slot for the driver to put data to be sent
|
|
* regs->txrd - the next slot for the device to read data
|
|
* priv->eskbp - the next slot for the driver to call can_put_echo_skb for
|
|
*
|
|
* grcan_start_xmit can enter more messages as long as regs->txwr does
|
|
* not reach priv->eskbp (within 1 message gap)
|
|
*
|
|
* The device sends messages until regs->txrd reaches regs->txwr
|
|
*
|
|
* The interrupt calls handler calls can_put_echo_skb until
|
|
* priv->eskbp reaches regs->txrd
|
|
*/
|
|
static netdev_tx_t grcan_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
struct grcan_registers __iomem *regs = priv->regs;
|
|
struct grcan_dma *dma = &priv->dma;
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
u32 id, txwr, txrd, space, txctrl;
|
|
int slotindex;
|
|
u32 *slot;
|
|
u32 i, rtr, eff, dlc, tmp, err;
|
|
int j, shift;
|
|
unsigned long flags;
|
|
u32 oneshotmode = priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT;
|
|
|
|
if (can_dropped_invalid_skb(dev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
/* Trying to transmit in silent mode will generate error interrupts, but
|
|
* this should never happen - the queue should not have been started.
|
|
*/
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
return NETDEV_TX_BUSY;
|
|
|
|
/* Reads of priv->eskbp and shut-downs of the queue needs to
|
|
* be atomic towards the updates to priv->eskbp and wake-ups
|
|
* of the queue in the interrupt handler.
|
|
*/
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
txwr = grcan_read_reg(®s->txwr);
|
|
space = grcan_txspace(dma->tx.size, txwr, priv->eskbp);
|
|
|
|
slotindex = txwr / GRCAN_MSG_SIZE;
|
|
slot = dma->tx.buf + txwr;
|
|
|
|
if (unlikely(space == 1))
|
|
netif_stop_queue(dev);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
/* End of critical section*/
|
|
|
|
/* This should never happen. If circular buffer is full, the
|
|
* netif_stop_queue should have been stopped already.
|
|
*/
|
|
if (unlikely(!space)) {
|
|
netdev_err(dev, "No buffer space, but queue is non-stopped.\n");
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Convert and write CAN message to DMA buffer */
|
|
eff = cf->can_id & CAN_EFF_FLAG;
|
|
rtr = cf->can_id & CAN_RTR_FLAG;
|
|
id = cf->can_id & (eff ? CAN_EFF_MASK : CAN_SFF_MASK);
|
|
dlc = cf->can_dlc;
|
|
if (eff)
|
|
tmp = (id << GRCAN_MSG_EID_BIT) & GRCAN_MSG_EID;
|
|
else
|
|
tmp = (id << GRCAN_MSG_BID_BIT) & GRCAN_MSG_BID;
|
|
slot[0] = (eff ? GRCAN_MSG_IDE : 0) | (rtr ? GRCAN_MSG_RTR : 0) | tmp;
|
|
|
|
slot[1] = ((dlc << GRCAN_MSG_DLC_BIT) & GRCAN_MSG_DLC);
|
|
slot[2] = 0;
|
|
slot[3] = 0;
|
|
for (i = 0; i < dlc; i++) {
|
|
j = GRCAN_MSG_DATA_SLOT_INDEX(i);
|
|
shift = GRCAN_MSG_DATA_SHIFT(i);
|
|
slot[j] |= cf->data[i] << shift;
|
|
}
|
|
|
|
/* Checking that channel has not been disabled. These cases
|
|
* should never happen
|
|
*/
|
|
txctrl = grcan_read_reg(®s->txctrl);
|
|
if (!(txctrl & GRCAN_TXCTRL_ENABLE))
|
|
netdev_err(dev, "tx channel spuriously disabled\n");
|
|
|
|
if (oneshotmode && !(txctrl & GRCAN_TXCTRL_SINGLE))
|
|
netdev_err(dev, "one-shot mode spuriously disabled\n");
|
|
|
|
/* Bug workaround for old version of grcan where updating txwr
|
|
* in the same clock cycle as the controller updates txrd to
|
|
* the current txwr could hang the can controller
|
|
*/
|
|
if (priv->need_txbug_workaround) {
|
|
txrd = grcan_read_reg(®s->txrd);
|
|
if (unlikely(grcan_ring_sub(txwr, txrd, dma->tx.size) == 1)) {
|
|
netdev_tx_t txstatus;
|
|
|
|
err = grcan_txbug_workaround(dev, skb, txwr,
|
|
oneshotmode, &txstatus);
|
|
if (err)
|
|
return txstatus;
|
|
}
|
|
}
|
|
|
|
/* Prepare skb for echoing. This must be after the bug workaround above
|
|
* as ownership of the skb is passed on by calling can_put_echo_skb.
|
|
* Returning NETDEV_TX_BUSY or accessing skb or cf after a call to
|
|
* can_put_echo_skb would be an error unless other measures are
|
|
* taken.
|
|
*/
|
|
priv->txdlc[slotindex] = cf->can_dlc; /* Store dlc for statistics */
|
|
can_put_echo_skb(skb, dev, slotindex);
|
|
|
|
/* Make sure everything is written before allowing hardware to
|
|
* read from the memory
|
|
*/
|
|
wmb();
|
|
|
|
/* Update write pointer to start transmission */
|
|
grcan_write_reg(®s->txwr,
|
|
grcan_ring_add(txwr, GRCAN_MSG_SIZE, dma->tx.size));
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* ========== Setting up sysfs interface and module parameters ========== */
|
|
|
|
#define GRCAN_NOT_BOOL(unsigned_val) ((unsigned_val) > 1)
|
|
|
|
#define GRCAN_MODULE_PARAM(name, mtype, valcheckf, desc) \
|
|
static void grcan_sanitize_##name(struct platform_device *pd) \
|
|
{ \
|
|
struct grcan_device_config grcan_default_config \
|
|
= GRCAN_DEFAULT_DEVICE_CONFIG; \
|
|
if (valcheckf(grcan_module_config.name)) { \
|
|
dev_err(&pd->dev, \
|
|
"Invalid module parameter value for " \
|
|
#name " - setting default\n"); \
|
|
grcan_module_config.name = \
|
|
grcan_default_config.name; \
|
|
} \
|
|
} \
|
|
module_param_named(name, grcan_module_config.name, \
|
|
mtype, S_IRUGO); \
|
|
MODULE_PARM_DESC(name, desc)
|
|
|
|
#define GRCAN_CONFIG_ATTR(name, desc) \
|
|
static ssize_t grcan_store_##name(struct device *sdev, \
|
|
struct device_attribute *att, \
|
|
const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
struct net_device *dev = to_net_dev(sdev); \
|
|
struct grcan_priv *priv = netdev_priv(dev); \
|
|
u8 val; \
|
|
int ret; \
|
|
if (dev->flags & IFF_UP) \
|
|
return -EBUSY; \
|
|
ret = kstrtou8(buf, 0, &val); \
|
|
if (ret < 0 || val > 1) \
|
|
return -EINVAL; \
|
|
priv->config.name = val; \
|
|
return count; \
|
|
} \
|
|
static ssize_t grcan_show_##name(struct device *sdev, \
|
|
struct device_attribute *att, \
|
|
char *buf) \
|
|
{ \
|
|
struct net_device *dev = to_net_dev(sdev); \
|
|
struct grcan_priv *priv = netdev_priv(dev); \
|
|
return sprintf(buf, "%d\n", priv->config.name); \
|
|
} \
|
|
static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, \
|
|
grcan_show_##name, \
|
|
grcan_store_##name); \
|
|
GRCAN_MODULE_PARAM(name, ushort, GRCAN_NOT_BOOL, desc)
|
|
|
|
/* The following configuration options are made available both via module
|
|
* parameters and writable sysfs files. See the chapter about GRCAN in the
|
|
* documentation for the GRLIB VHDL library for further details.
|
|
*/
|
|
GRCAN_CONFIG_ATTR(enable0,
|
|
"Configuration of physical interface 0. Determines\n" \
|
|
"the \"Enable 0\" bit of the configuration register.\n" \
|
|
"Format: 0 | 1\nDefault: 0\n");
|
|
|
|
GRCAN_CONFIG_ATTR(enable1,
|
|
"Configuration of physical interface 1. Determines\n" \
|
|
"the \"Enable 1\" bit of the configuration register.\n" \
|
|
"Format: 0 | 1\nDefault: 0\n");
|
|
|
|
GRCAN_CONFIG_ATTR(select,
|
|
"Select which physical interface to use.\n" \
|
|
"Format: 0 | 1\nDefault: 0\n");
|
|
|
|
/* The tx and rx buffer size configuration options are only available via module
|
|
* parameters.
|
|
*/
|
|
GRCAN_MODULE_PARAM(txsize, uint, GRCAN_INVALID_BUFFER_SIZE,
|
|
"Sets the size of the tx buffer.\n" \
|
|
"Format: <unsigned int> where (txsize & ~0x1fffc0) == 0\n" \
|
|
"Default: 1024\n");
|
|
GRCAN_MODULE_PARAM(rxsize, uint, GRCAN_INVALID_BUFFER_SIZE,
|
|
"Sets the size of the rx buffer.\n" \
|
|
"Format: <unsigned int> where (size & ~0x1fffc0) == 0\n" \
|
|
"Default: 1024\n");
|
|
|
|
/* Function that makes sure that configuration done using
|
|
* module parameters are set to valid values
|
|
*/
|
|
static void grcan_sanitize_module_config(struct platform_device *ofdev)
|
|
{
|
|
grcan_sanitize_enable0(ofdev);
|
|
grcan_sanitize_enable1(ofdev);
|
|
grcan_sanitize_select(ofdev);
|
|
grcan_sanitize_txsize(ofdev);
|
|
grcan_sanitize_rxsize(ofdev);
|
|
}
|
|
|
|
static const struct attribute *const sysfs_grcan_attrs[] = {
|
|
/* Config attrs */
|
|
&dev_attr_enable0.attr,
|
|
&dev_attr_enable1.attr,
|
|
&dev_attr_select.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group sysfs_grcan_group = {
|
|
.name = "grcan",
|
|
.attrs = (struct attribute **)sysfs_grcan_attrs,
|
|
};
|
|
|
|
/* ========== Setting up the driver ========== */
|
|
|
|
static const struct net_device_ops grcan_netdev_ops = {
|
|
.ndo_open = grcan_open,
|
|
.ndo_stop = grcan_close,
|
|
.ndo_start_xmit = grcan_start_xmit,
|
|
.ndo_change_mtu = can_change_mtu,
|
|
};
|
|
|
|
static int grcan_setup_netdev(struct platform_device *ofdev,
|
|
void __iomem *base,
|
|
int irq, u32 ambafreq, bool txbug)
|
|
{
|
|
struct net_device *dev;
|
|
struct grcan_priv *priv;
|
|
struct grcan_registers __iomem *regs;
|
|
int err;
|
|
|
|
dev = alloc_candev(sizeof(struct grcan_priv), 0);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
dev->irq = irq;
|
|
dev->flags |= IFF_ECHO;
|
|
dev->netdev_ops = &grcan_netdev_ops;
|
|
dev->sysfs_groups[0] = &sysfs_grcan_group;
|
|
|
|
priv = netdev_priv(dev);
|
|
memcpy(&priv->config, &grcan_module_config,
|
|
sizeof(struct grcan_device_config));
|
|
priv->dev = dev;
|
|
priv->regs = base;
|
|
priv->can.bittiming_const = &grcan_bittiming_const;
|
|
priv->can.do_set_bittiming = grcan_set_bittiming;
|
|
priv->can.do_set_mode = grcan_set_mode;
|
|
priv->can.do_get_berr_counter = grcan_get_berr_counter;
|
|
priv->can.clock.freq = ambafreq;
|
|
priv->can.ctrlmode_supported =
|
|
CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_ONE_SHOT;
|
|
priv->need_txbug_workaround = txbug;
|
|
|
|
/* Discover if triple sampling is supported by hardware */
|
|
regs = priv->regs;
|
|
grcan_set_bits(®s->ctrl, GRCAN_CTRL_RESET);
|
|
grcan_set_bits(®s->conf, GRCAN_CONF_SAM);
|
|
if (grcan_read_bits(®s->conf, GRCAN_CONF_SAM)) {
|
|
priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
|
|
dev_dbg(&ofdev->dev, "Hardware supports triple-sampling\n");
|
|
}
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
if (priv->need_txbug_workaround) {
|
|
init_timer(&priv->rr_timer);
|
|
priv->rr_timer.function = grcan_running_reset;
|
|
priv->rr_timer.data = (unsigned long)dev;
|
|
|
|
init_timer(&priv->hang_timer);
|
|
priv->hang_timer.function = grcan_initiate_running_reset;
|
|
priv->hang_timer.data = (unsigned long)dev;
|
|
}
|
|
|
|
netif_napi_add(dev, &priv->napi, grcan_poll, GRCAN_NAPI_WEIGHT);
|
|
|
|
SET_NETDEV_DEV(dev, &ofdev->dev);
|
|
dev_info(&ofdev->dev, "regs=0x%p, irq=%d, clock=%d\n",
|
|
priv->regs, dev->irq, priv->can.clock.freq);
|
|
|
|
err = register_candev(dev);
|
|
if (err)
|
|
goto exit_free_candev;
|
|
|
|
platform_set_drvdata(ofdev, dev);
|
|
|
|
/* Reset device to allow bit-timing to be set. No need to call
|
|
* grcan_reset at this stage. That is done in grcan_open.
|
|
*/
|
|
grcan_write_reg(®s->ctrl, GRCAN_CTRL_RESET);
|
|
|
|
return 0;
|
|
exit_free_candev:
|
|
free_candev(dev);
|
|
return err;
|
|
}
|
|
|
|
static int grcan_probe(struct platform_device *ofdev)
|
|
{
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
struct resource *res;
|
|
u32 sysid, ambafreq;
|
|
int irq, err;
|
|
void __iomem *base;
|
|
bool txbug = true;
|
|
|
|
/* Compare GRLIB version number with the first that does not
|
|
* have the tx bug (see start_xmit)
|
|
*/
|
|
err = of_property_read_u32(np, "systemid", &sysid);
|
|
if (!err && ((sysid & GRLIB_VERSION_MASK)
|
|
>= GRCAN_TXBUG_SAFE_GRLIB_VERSION))
|
|
txbug = false;
|
|
|
|
err = of_property_read_u32(np, "freq", &ambafreq);
|
|
if (err) {
|
|
dev_err(&ofdev->dev, "unable to fetch \"freq\" property\n");
|
|
goto exit_error;
|
|
}
|
|
|
|
res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&ofdev->dev, res);
|
|
if (IS_ERR(base)) {
|
|
err = PTR_ERR(base);
|
|
goto exit_error;
|
|
}
|
|
|
|
irq = irq_of_parse_and_map(np, GRCAN_IRQIX_IRQ);
|
|
if (!irq) {
|
|
dev_err(&ofdev->dev, "no irq found\n");
|
|
err = -ENODEV;
|
|
goto exit_error;
|
|
}
|
|
|
|
grcan_sanitize_module_config(ofdev);
|
|
|
|
err = grcan_setup_netdev(ofdev, base, irq, ambafreq, txbug);
|
|
if (err)
|
|
goto exit_dispose_irq;
|
|
|
|
return 0;
|
|
|
|
exit_dispose_irq:
|
|
irq_dispose_mapping(irq);
|
|
exit_error:
|
|
dev_err(&ofdev->dev,
|
|
"%s socket CAN driver initialization failed with error %d\n",
|
|
DRV_NAME, err);
|
|
return err;
|
|
}
|
|
|
|
static int grcan_remove(struct platform_device *ofdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(ofdev);
|
|
struct grcan_priv *priv = netdev_priv(dev);
|
|
|
|
unregister_candev(dev); /* Will in turn call grcan_close */
|
|
|
|
irq_dispose_mapping(dev->irq);
|
|
netif_napi_del(&priv->napi);
|
|
free_candev(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id grcan_match[] = {
|
|
{.name = "GAISLER_GRCAN"},
|
|
{.name = "01_03d"},
|
|
{.name = "GAISLER_GRHCAN"},
|
|
{.name = "01_034"},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, grcan_match);
|
|
|
|
static struct platform_driver grcan_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = grcan_match,
|
|
},
|
|
.probe = grcan_probe,
|
|
.remove = grcan_remove,
|
|
};
|
|
|
|
module_platform_driver(grcan_driver);
|
|
|
|
MODULE_AUTHOR("Aeroflex Gaisler AB.");
|
|
MODULE_DESCRIPTION("Socket CAN driver for Aeroflex Gaisler GRCAN");
|
|
MODULE_LICENSE("GPL");
|