![Peter Rosin](/assets/img/avatar_default.png)
The i2c mux core can then take appropriate action depending on if it is used for an actual i2c mux, for a gate or for an arbitrator (the last is the case for these drivers). This adds support for the new clearer and more compact devicetree bindings that was added recently. Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Peter Rosin <peda@axentia.se>
243 lines
6.9 KiB
C
243 lines
6.9 KiB
C
/*
|
|
* GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
|
|
*
|
|
* Copyright (C) 2012 Google, Inc
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-mux.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
|
|
/**
|
|
* struct i2c_arbitrator_data - Driver data for I2C arbitrator
|
|
*
|
|
* @our_gpio: GPIO we'll use to claim.
|
|
* @our_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO ==
|
|
* this then consider it released.
|
|
* @their_gpio: GPIO that the other side will use to claim.
|
|
* @their_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO ==
|
|
* this then consider it released.
|
|
* @slew_delay_us: microseconds to wait for a GPIO to go high.
|
|
* @wait_retry_us: we'll attempt another claim after this many microseconds.
|
|
* @wait_free_us: we'll give up after this many microseconds.
|
|
*/
|
|
|
|
struct i2c_arbitrator_data {
|
|
int our_gpio;
|
|
int our_gpio_release;
|
|
int their_gpio;
|
|
int their_gpio_release;
|
|
unsigned int slew_delay_us;
|
|
unsigned int wait_retry_us;
|
|
unsigned int wait_free_us;
|
|
};
|
|
|
|
|
|
/**
|
|
* i2c_arbitrator_select - claim the I2C bus
|
|
*
|
|
* Use the GPIO-based signalling protocol; return -EBUSY if we fail.
|
|
*/
|
|
static int i2c_arbitrator_select(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
|
|
unsigned long stop_retry, stop_time;
|
|
|
|
/* Start a round of trying to claim the bus */
|
|
stop_time = jiffies + usecs_to_jiffies(arb->wait_free_us) + 1;
|
|
do {
|
|
/* Indicate that we want to claim the bus */
|
|
gpio_set_value(arb->our_gpio, !arb->our_gpio_release);
|
|
udelay(arb->slew_delay_us);
|
|
|
|
/* Wait for the other master to release it */
|
|
stop_retry = jiffies + usecs_to_jiffies(arb->wait_retry_us) + 1;
|
|
while (time_before(jiffies, stop_retry)) {
|
|
int gpio_val = !!gpio_get_value(arb->their_gpio);
|
|
|
|
if (gpio_val == arb->their_gpio_release) {
|
|
/* We got it, so return */
|
|
return 0;
|
|
}
|
|
|
|
usleep_range(50, 200);
|
|
}
|
|
|
|
/* It didn't release, so give up, wait, and try again */
|
|
gpio_set_value(arb->our_gpio, arb->our_gpio_release);
|
|
|
|
usleep_range(arb->wait_retry_us, arb->wait_retry_us * 2);
|
|
} while (time_before(jiffies, stop_time));
|
|
|
|
/* Give up, release our claim */
|
|
gpio_set_value(arb->our_gpio, arb->our_gpio_release);
|
|
udelay(arb->slew_delay_us);
|
|
dev_err(muxc->dev, "Could not claim bus, timeout\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/**
|
|
* i2c_arbitrator_deselect - release the I2C bus
|
|
*
|
|
* Release the I2C bus using the GPIO-based signalling protocol.
|
|
*/
|
|
static int i2c_arbitrator_deselect(struct i2c_mux_core *muxc, u32 chan)
|
|
{
|
|
const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
|
|
|
|
/* Release the bus and wait for the other master to notice */
|
|
gpio_set_value(arb->our_gpio, arb->our_gpio_release);
|
|
udelay(arb->slew_delay_us);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_arbitrator_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct device_node *parent_np;
|
|
struct i2c_mux_core *muxc;
|
|
struct i2c_arbitrator_data *arb;
|
|
enum of_gpio_flags gpio_flags;
|
|
unsigned long out_init;
|
|
int ret;
|
|
|
|
/* We only support probing from device tree; no platform_data */
|
|
if (!np) {
|
|
dev_err(dev, "Cannot find device tree node\n");
|
|
return -ENODEV;
|
|
}
|
|
if (dev_get_platdata(dev)) {
|
|
dev_err(dev, "Platform data is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), I2C_MUX_ARBITRATOR,
|
|
i2c_arbitrator_select, i2c_arbitrator_deselect);
|
|
if (!muxc)
|
|
return -ENOMEM;
|
|
arb = i2c_mux_priv(muxc);
|
|
|
|
platform_set_drvdata(pdev, muxc);
|
|
|
|
/* Request GPIOs */
|
|
ret = of_get_named_gpio_flags(np, "our-claim-gpio", 0, &gpio_flags);
|
|
if (!gpio_is_valid(ret)) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Error getting our-claim-gpio\n");
|
|
return ret;
|
|
}
|
|
arb->our_gpio = ret;
|
|
arb->our_gpio_release = !!(gpio_flags & OF_GPIO_ACTIVE_LOW);
|
|
out_init = (gpio_flags & OF_GPIO_ACTIVE_LOW) ?
|
|
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
|
|
ret = devm_gpio_request_one(dev, arb->our_gpio, out_init,
|
|
"our-claim-gpio");
|
|
if (ret) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Error requesting our-claim-gpio\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = of_get_named_gpio_flags(np, "their-claim-gpios", 0, &gpio_flags);
|
|
if (!gpio_is_valid(ret)) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Error getting their-claim-gpio\n");
|
|
return ret;
|
|
}
|
|
arb->their_gpio = ret;
|
|
arb->their_gpio_release = !!(gpio_flags & OF_GPIO_ACTIVE_LOW);
|
|
ret = devm_gpio_request_one(dev, arb->their_gpio, GPIOF_IN,
|
|
"their-claim-gpio");
|
|
if (ret) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Error requesting their-claim-gpio\n");
|
|
return ret;
|
|
}
|
|
|
|
/* At the moment we only support a single two master (us + 1 other) */
|
|
if (gpio_is_valid(of_get_named_gpio(np, "their-claim-gpios", 1))) {
|
|
dev_err(dev, "Only one other master is supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Arbitration parameters */
|
|
if (of_property_read_u32(np, "slew-delay-us", &arb->slew_delay_us))
|
|
arb->slew_delay_us = 10;
|
|
if (of_property_read_u32(np, "wait-retry-us", &arb->wait_retry_us))
|
|
arb->wait_retry_us = 3000;
|
|
if (of_property_read_u32(np, "wait-free-us", &arb->wait_free_us))
|
|
arb->wait_free_us = 50000;
|
|
|
|
/* Find our parent */
|
|
parent_np = of_parse_phandle(np, "i2c-parent", 0);
|
|
if (!parent_np) {
|
|
dev_err(dev, "Cannot parse i2c-parent\n");
|
|
return -EINVAL;
|
|
}
|
|
muxc->parent = of_get_i2c_adapter_by_node(parent_np);
|
|
of_node_put(parent_np);
|
|
if (!muxc->parent) {
|
|
dev_err(dev, "Cannot find parent bus\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
/* Actually add the mux adapter */
|
|
ret = i2c_mux_add_adapter(muxc, 0, 0, 0);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to add adapter\n");
|
|
i2c_put_adapter(muxc->parent);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_arbitrator_remove(struct platform_device *pdev)
|
|
{
|
|
struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
|
|
|
|
i2c_mux_del_adapters(muxc);
|
|
i2c_put_adapter(muxc->parent);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id i2c_arbitrator_of_match[] = {
|
|
{ .compatible = "i2c-arb-gpio-challenge", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, i2c_arbitrator_of_match);
|
|
|
|
static struct platform_driver i2c_arbitrator_driver = {
|
|
.probe = i2c_arbitrator_probe,
|
|
.remove = i2c_arbitrator_remove,
|
|
.driver = {
|
|
.name = "i2c-arb-gpio-challenge",
|
|
.of_match_table = i2c_arbitrator_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(i2c_arbitrator_driver);
|
|
|
|
MODULE_DESCRIPTION("GPIO-based I2C Arbitration");
|
|
MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:i2c-arb-gpio-challenge");
|