remarkable-linux/net/tipc/eth_media.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

315 lines
8.7 KiB
C

/*
* net/tipc/eth_media.c: Ethernet bearer support for TIPC
*
* Copyright (c) 2001-2007, Ericsson AB
* Copyright (c) 2005-2007, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <net/tipc/tipc.h>
#include <net/tipc/tipc_bearer.h>
#include <net/tipc/tipc_msg.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <net/net_namespace.h>
#define MAX_ETH_BEARERS 2
#define ETH_LINK_PRIORITY TIPC_DEF_LINK_PRI
#define ETH_LINK_TOLERANCE TIPC_DEF_LINK_TOL
#define ETH_LINK_WINDOW TIPC_DEF_LINK_WIN
/**
* struct eth_bearer - Ethernet bearer data structure
* @bearer: ptr to associated "generic" bearer structure
* @dev: ptr to associated Ethernet network device
* @tipc_packet_type: used in binding TIPC to Ethernet driver
*/
struct eth_bearer {
struct tipc_bearer *bearer;
struct net_device *dev;
struct packet_type tipc_packet_type;
};
static struct eth_bearer eth_bearers[MAX_ETH_BEARERS];
static int eth_started = 0;
static struct notifier_block notifier;
/**
* send_msg - send a TIPC message out over an Ethernet interface
*/
static int send_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr,
struct tipc_media_addr *dest)
{
struct sk_buff *clone;
struct net_device *dev;
clone = skb_clone(buf, GFP_ATOMIC);
if (clone) {
skb_reset_network_header(clone);
dev = ((struct eth_bearer *)(tb_ptr->usr_handle))->dev;
clone->dev = dev;
dev_hard_header(clone, dev, ETH_P_TIPC,
&dest->dev_addr.eth_addr,
dev->dev_addr, clone->len);
dev_queue_xmit(clone);
}
return 0;
}
/**
* recv_msg - handle incoming TIPC message from an Ethernet interface
*
* Accept only packets explicitly sent to this node, or broadcast packets;
* ignores packets sent using Ethernet multicast, and traffic sent to other
* nodes (which can happen if interface is running in promiscuous mode).
* Routine truncates any Ethernet padding/CRC appended to the message,
* and ensures message size matches actual length
*/
static int recv_msg(struct sk_buff *buf, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct eth_bearer *eb_ptr = (struct eth_bearer *)pt->af_packet_priv;
u32 size;
if (!net_eq(dev_net(dev), &init_net)) {
kfree_skb(buf);
return 0;
}
if (likely(eb_ptr->bearer)) {
if (likely(buf->pkt_type <= PACKET_BROADCAST)) {
size = msg_size((struct tipc_msg *)buf->data);
skb_trim(buf, size);
if (likely(buf->len == size)) {
buf->next = NULL;
tipc_recv_msg(buf, eb_ptr->bearer);
return 0;
}
}
}
kfree_skb(buf);
return 0;
}
/**
* enable_bearer - attach TIPC bearer to an Ethernet interface
*/
static int enable_bearer(struct tipc_bearer *tb_ptr)
{
struct net_device *dev = NULL;
struct net_device *pdev = NULL;
struct eth_bearer *eb_ptr = &eth_bearers[0];
struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
char *driver_name = strchr((const char *)tb_ptr->name, ':') + 1;
/* Find device with specified name */
for_each_netdev(&init_net, pdev){
if (!strncmp(pdev->name, driver_name, IFNAMSIZ)) {
dev = pdev;
break;
}
}
if (!dev)
return -ENODEV;
/* Find Ethernet bearer for device (or create one) */
for (;(eb_ptr != stop) && eb_ptr->dev && (eb_ptr->dev != dev); eb_ptr++);
if (eb_ptr == stop)
return -EDQUOT;
if (!eb_ptr->dev) {
eb_ptr->dev = dev;
eb_ptr->tipc_packet_type.type = htons(ETH_P_TIPC);
eb_ptr->tipc_packet_type.dev = dev;
eb_ptr->tipc_packet_type.func = recv_msg;
eb_ptr->tipc_packet_type.af_packet_priv = eb_ptr;
INIT_LIST_HEAD(&(eb_ptr->tipc_packet_type.list));
dev_hold(dev);
dev_add_pack(&eb_ptr->tipc_packet_type);
}
/* Associate TIPC bearer with Ethernet bearer */
eb_ptr->bearer = tb_ptr;
tb_ptr->usr_handle = (void *)eb_ptr;
tb_ptr->mtu = dev->mtu;
tb_ptr->blocked = 0;
tb_ptr->addr.type = htonl(TIPC_MEDIA_TYPE_ETH);
memcpy(&tb_ptr->addr.dev_addr, dev->dev_addr, ETH_ALEN);
return 0;
}
/**
* disable_bearer - detach TIPC bearer from an Ethernet interface
*
* We really should do dev_remove_pack() here, but this function can not be
* called at tasklet level. => Use eth_bearer->bearer as a flag to throw away
* incoming buffers, & postpone dev_remove_pack() to eth_media_stop() on exit.
*/
static void disable_bearer(struct tipc_bearer *tb_ptr)
{
((struct eth_bearer *)tb_ptr->usr_handle)->bearer = NULL;
}
/**
* recv_notification - handle device updates from OS
*
* Change the state of the Ethernet bearer (if any) associated with the
* specified device.
*/
static int recv_notification(struct notifier_block *nb, unsigned long evt,
void *dv)
{
struct net_device *dev = (struct net_device *)dv;
struct eth_bearer *eb_ptr = &eth_bearers[0];
struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
if (!net_eq(dev_net(dev), &init_net))
return NOTIFY_DONE;
while ((eb_ptr->dev != dev)) {
if (++eb_ptr == stop)
return NOTIFY_DONE; /* couldn't find device */
}
if (!eb_ptr->bearer)
return NOTIFY_DONE; /* bearer had been disabled */
eb_ptr->bearer->mtu = dev->mtu;
switch (evt) {
case NETDEV_CHANGE:
if (netif_carrier_ok(dev))
tipc_continue(eb_ptr->bearer);
else
tipc_block_bearer(eb_ptr->bearer->name);
break;
case NETDEV_UP:
tipc_continue(eb_ptr->bearer);
break;
case NETDEV_DOWN:
tipc_block_bearer(eb_ptr->bearer->name);
break;
case NETDEV_CHANGEMTU:
case NETDEV_CHANGEADDR:
tipc_block_bearer(eb_ptr->bearer->name);
tipc_continue(eb_ptr->bearer);
break;
case NETDEV_UNREGISTER:
case NETDEV_CHANGENAME:
tipc_disable_bearer(eb_ptr->bearer->name);
break;
}
return NOTIFY_OK;
}
/**
* eth_addr2str - convert Ethernet address to string
*/
static char *eth_addr2str(struct tipc_media_addr *a, char *str_buf, int str_size)
{
unchar *addr = (unchar *)&a->dev_addr;
if (str_size < 18)
*str_buf = '\0';
else
sprintf(str_buf, "%pM", addr);
return str_buf;
}
/**
* tipc_eth_media_start - activate Ethernet bearer support
*
* Register Ethernet media type with TIPC bearer code. Also register
* with OS for notifications about device state changes.
*/
int tipc_eth_media_start(void)
{
struct tipc_media_addr bcast_addr;
int res;
if (eth_started)
return -EINVAL;
bcast_addr.type = htonl(TIPC_MEDIA_TYPE_ETH);
memset(&bcast_addr.dev_addr, 0xff, ETH_ALEN);
memset(eth_bearers, 0, sizeof(eth_bearers));
res = tipc_register_media(TIPC_MEDIA_TYPE_ETH, "eth",
enable_bearer, disable_bearer, send_msg,
eth_addr2str, &bcast_addr, ETH_LINK_PRIORITY,
ETH_LINK_TOLERANCE, ETH_LINK_WINDOW);
if (res)
return res;
notifier.notifier_call = &recv_notification;
notifier.priority = 0;
res = register_netdevice_notifier(&notifier);
if (!res)
eth_started = 1;
return res;
}
/**
* tipc_eth_media_stop - deactivate Ethernet bearer support
*/
void tipc_eth_media_stop(void)
{
int i;
if (!eth_started)
return;
unregister_netdevice_notifier(&notifier);
for (i = 0; i < MAX_ETH_BEARERS ; i++) {
if (eth_bearers[i].bearer) {
eth_bearers[i].bearer->blocked = 1;
eth_bearers[i].bearer = NULL;
}
if (eth_bearers[i].dev) {
dev_remove_pack(&eth_bearers[i].tipc_packet_type);
dev_put(eth_bearers[i].dev);
}
}
memset(&eth_bearers, 0, sizeof(eth_bearers));
eth_started = 0;
}