939dc6f51e
Add a new cpufreq driver for Tegra186 (and likely later). The CPUs are organized into two clusters, Denver and A57, with two and four cores respectively. CPU frequency can be adjusted by writing the desired rate divisor and a voltage hint to a special per-core register. The frequency of each core can be set individually; however, this is just a hint as all CPUs in a cluster will run at the maximum rate of non-idle CPUs in the cluster. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
113 lines
5.3 KiB
Makefile
113 lines
5.3 KiB
Makefile
# CPUfreq core
|
|
obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o
|
|
|
|
# CPUfreq stats
|
|
obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o
|
|
|
|
# CPUfreq governors
|
|
obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o
|
|
|
|
obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
|
|
obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o
|
|
|
|
##################################################################################
|
|
# x86 drivers.
|
|
# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
|
|
# K8 systems. This is still the case but acpi-cpufreq errors out so that
|
|
# powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers.
|
|
# speedstep-* is preferred over p4-clockmod.
|
|
|
|
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
|
|
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
|
|
obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
|
|
obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
|
|
obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
|
|
obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
|
|
obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
|
|
obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
|
|
obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
|
|
obj-$(CONFIG_X86_LONGRUN) += longrun.o
|
|
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
|
|
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
|
|
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
|
|
obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o
|
|
obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o
|
|
obj-$(CONFIG_X86_SFI_CPUFREQ) += sfi-cpufreq.o
|
|
|
|
##################################################################################
|
|
# ARM SoC drivers
|
|
obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o
|
|
# big LITTLE per platform glues. Keep DT_BL_CPUFREQ as the last entry in all big
|
|
# LITTLE drivers, so that it is probed last.
|
|
obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
|
|
|
|
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
|
|
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
|
|
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
|
|
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
|
|
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
|
|
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
|
|
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
|
|
obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt8173-cpufreq.o
|
|
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
|
|
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
|
|
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
|
|
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
|
|
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
|
|
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
|
|
obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o
|
|
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
|
|
obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o
|
|
obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
|
|
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
|
|
obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
|
|
obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
|
|
|
|
|
|
##################################################################################
|
|
# PowerPC platform drivers
|
|
obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o
|
|
ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
|
|
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
|
|
obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
|
|
obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o
|
|
obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o
|
|
|
|
##################################################################################
|
|
# Other platform drivers
|
|
obj-$(CONFIG_AVR32_AT32AP_CPUFREQ) += at32ap-cpufreq.o
|
|
obj-$(CONFIG_BFIN_CPU_FREQ) += blackfin-cpufreq.o
|
|
obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o
|
|
obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
|
|
obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
|
|
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
|
|
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
|
|
obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
|
|
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
|
|
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
|
|
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
|
|
obj-$(CONFIG_UNICORE32) += unicore2-cpufreq.o
|