6a776e47a0
Pull thermal management updates from Zhang Rui: - Fix a problem where orderly_shutdown() is called for multiple times due to multiple critical overheating events raised in a short period by platform thermal driver. (Keerthy) - Introduce a backup thermal shutdown mechanism, which invokes kernel_power_off()/emergency_restart() directly, after orderly_shutdown() being issued for certain amount of time(specified via Kconfig). This is useful in certain conditions that userspace may be unable to power off the system in a clean manner and leaves the system in a critical state, like in the middle of driver probing phase. (Keerthy) - Introduce a new interface in thermal devfreq_cooling code so that the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. (Lukasz Luba) - Introduce BCM 2835 soc thermal driver and northstar thermal driver, within a new sub-folder. (Rafał Miłecki) - Introduce DA9062/61 thermal driver. (Steve Twiss) - Remove non-DT booting on TI-SoC driver. Also add support to fetching coefficients from DT. (Keerthy) - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund) - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien, Brian Bian) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: core: Add a back up thermal shutdown mechanism thermal: core: Allow orderly_poweroff to be called only once Thermal: Intel SoC DTS: Change interrupt request behavior trace: thermal: add another parameter 'power' to the tracing function thermal: devfreq_cooling: add new interface for direct power read thermal: devfreq_cooling: refactor code and add get_voltage function thermal: mt8173: minor mtk_thermal.c cleanups thermal: bcm2835: move to the broadcom subdirectory thermal: broadcom: ns: specify myself as MODULE_AUTHOR thermal: da9062/61: Thermal junction temperature monitoring driver Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding thermal: broadcom: add Northstar thermal driver dt-bindings: thermal: add support for Broadcom's Northstar thermal thermal: bcm2835: add thermal driver for bcm2835 SoC dt-bindings: Add thermal zone to bcm2835-thermal example thermal: rcar_gen3_thermal: add suspend and resume support thermal: rcar_gen3_thermal: store device match data in private structure thermal: rcar_gen3_thermal: enable hardware interrupts for trip points thermal: rcar_gen3_thermal: record and check number of TSCs found thermal: rcar_gen3_thermal: check that TSC exists before memory allocation ...
62 lines
2.4 KiB
Makefile
62 lines
2.4 KiB
Makefile
#
|
|
# Makefile for sensor chip drivers.
|
|
#
|
|
|
|
obj-$(CONFIG_THERMAL) += thermal_sys.o
|
|
thermal_sys-y += thermal_core.o thermal_sysfs.o \
|
|
thermal_helpers.o
|
|
|
|
# interface to/from other layers providing sensors
|
|
thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o
|
|
thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o
|
|
|
|
# governors
|
|
thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o
|
|
thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o
|
|
thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o
|
|
thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o
|
|
thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += power_allocator.o
|
|
|
|
# cpufreq cooling
|
|
thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
|
|
|
|
# clock cooling
|
|
thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o
|
|
|
|
# devfreq cooling
|
|
thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
|
|
|
|
# platform thermal drivers
|
|
obj-y += broadcom/
|
|
obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
|
|
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
|
|
obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o
|
|
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
|
|
obj-$(CONFIG_RCAR_GEN3_THERMAL) += rcar_gen3_thermal.o
|
|
obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o
|
|
obj-y += samsung/
|
|
obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
|
|
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
|
|
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
|
|
obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
|
|
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
|
|
obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
|
|
obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
|
|
obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
|
|
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
|
|
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
|
|
obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o
|
|
obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o
|
|
obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o
|
|
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
|
|
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
|
|
obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
|
|
obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
|
|
obj-$(CONFIG_ST_THERMAL) += st/
|
|
obj-$(CONFIG_QCOM_TSENS) += qcom/
|
|
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/
|
|
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
|
|
obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
|
|
obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
|
|
obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
|