![Justin P. Mattock](/assets/img/avatar_default.png)
Below you will find an updated version from the original series bunching all patches into one big patch updating broken web addresses that are located in Documentation/* Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult, the best way to deal with these is to use web.archive.org to locate these addresses that are outdated. Now there are also some addresses pointing to .spec files some are located, but some(after searching on the companies site)where still no where to be found. In this case I just changed the address to the company site this way the users can contact the company and they can locate them for the users. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Cc: Paulo Marques <pmarques@grupopie.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Michael Neuling <mikey@neuling.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
133 lines
3.8 KiB
Plaintext
133 lines
3.8 KiB
Plaintext
Getting started quick
|
|
---------------------
|
|
|
|
- Select packet support in the block device section and UDF support in
|
|
the file system section.
|
|
|
|
- Compile and install kernel and modules, reboot.
|
|
|
|
- You need the udftools package (pktsetup, mkudffs, cdrwtool).
|
|
Download from http://sourceforge.net/projects/linux-udf/
|
|
|
|
- Grab a new CD-RW disc and format it (assuming CD-RW is hdc, substitute
|
|
as appropriate):
|
|
# cdrwtool -d /dev/hdc -q
|
|
|
|
- Setup your writer
|
|
# pktsetup dev_name /dev/hdc
|
|
|
|
- Now you can mount /dev/pktcdvd/dev_name and copy files to it. Enjoy!
|
|
# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
|
|
|
|
|
|
Packet writing for DVD-RW media
|
|
-------------------------------
|
|
|
|
DVD-RW discs can be written to much like CD-RW discs if they are in
|
|
the so called "restricted overwrite" mode. To put a disc in restricted
|
|
overwrite mode, run:
|
|
|
|
# dvd+rw-format /dev/hdc
|
|
|
|
You can then use the disc the same way you would use a CD-RW disc:
|
|
|
|
# pktsetup dev_name /dev/hdc
|
|
# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
|
|
|
|
|
|
Packet writing for DVD+RW media
|
|
-------------------------------
|
|
|
|
According to the DVD+RW specification, a drive supporting DVD+RW discs
|
|
shall implement "true random writes with 2KB granularity", which means
|
|
that it should be possible to put any filesystem with a block size >=
|
|
2KB on such a disc. For example, it should be possible to do:
|
|
|
|
# dvd+rw-format /dev/hdc (only needed if the disc has never
|
|
been formatted)
|
|
# mkudffs /dev/hdc
|
|
# mount /dev/hdc /cdrom -t udf -o rw,noatime
|
|
|
|
However, some drives don't follow the specification and expect the
|
|
host to perform aligned writes at 32KB boundaries. Other drives do
|
|
follow the specification, but suffer bad performance problems if the
|
|
writes are not 32KB aligned.
|
|
|
|
Both problems can be solved by using the pktcdvd driver, which always
|
|
generates aligned writes.
|
|
|
|
# dvd+rw-format /dev/hdc
|
|
# pktsetup dev_name /dev/hdc
|
|
# mkudffs /dev/pktcdvd/dev_name
|
|
# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
|
|
|
|
|
|
Packet writing for DVD-RAM media
|
|
--------------------------------
|
|
|
|
DVD-RAM discs are random writable, so using the pktcdvd driver is not
|
|
necessary. However, using the pktcdvd driver can improve performance
|
|
in the same way it does for DVD+RW media.
|
|
|
|
|
|
Notes
|
|
-----
|
|
|
|
- CD-RW media can usually not be overwritten more than about 1000
|
|
times, so to avoid unnecessary wear on the media, you should always
|
|
use the noatime mount option.
|
|
|
|
- Defect management (ie automatic remapping of bad sectors) has not
|
|
been implemented yet, so you are likely to get at least some
|
|
filesystem corruption if the disc wears out.
|
|
|
|
- Since the pktcdvd driver makes the disc appear as a regular block
|
|
device with a 2KB block size, you can put any filesystem you like on
|
|
the disc. For example, run:
|
|
|
|
# /sbin/mke2fs /dev/pktcdvd/dev_name
|
|
|
|
to create an ext2 filesystem on the disc.
|
|
|
|
|
|
Using the pktcdvd sysfs interface
|
|
---------------------------------
|
|
|
|
Since Linux 2.6.20, the pktcdvd module has a sysfs interface
|
|
and can be controlled by it. For example the "pktcdvd" tool uses
|
|
this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
|
|
|
|
"pktcdvd" works similar to "pktsetup", e.g.:
|
|
|
|
# pktcdvd -a dev_name /dev/hdc
|
|
# mkudffs /dev/pktcdvd/dev_name
|
|
# mount -t udf -o rw,noatime /dev/pktcdvd/dev_name /dvdram
|
|
# cp files /dvdram
|
|
# umount /dvdram
|
|
# pktcdvd -r dev_name
|
|
|
|
|
|
For a description of the sysfs interface look into the file:
|
|
|
|
Documentation/ABI/testing/sysfs-block-pktcdvd
|
|
|
|
|
|
Using the pktcdvd debugfs interface
|
|
-----------------------------------
|
|
|
|
To read pktcdvd device infos in human readable form, do:
|
|
|
|
# cat /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/info
|
|
|
|
For a description of the debugfs interface look into the file:
|
|
|
|
Documentation/ABI/testing/debugfs-pktcdvd
|
|
|
|
|
|
|
|
Links
|
|
-----
|
|
|
|
See http://fy.chalmers.se/~appro/linux/DVD+RW/ for more information
|
|
about DVD writing.
|