remarkable-linux/drivers/usb
Alan Stern b2c0a863e1 USB: Update last_busy time after autosuspend fails
Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed.  The idle callback routine could
then schedule a delayed suspend for some time later.

However this behavior was changed by commit
f71648d73c (PM / Runtime: Remove idle
notification after failing suspend).  No notifications were sent, and
there was no clear mechanism to retry failed suspends.

This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down.  A companion
patch changes the PM core's behavior, but we also need to change the
USB core.  In particular, this patch (as1493) updates the device's
last_busy time when an autosuspend fails, so that the PM core will
retry the autosuspend in the future when the delay time expires
again.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
Cc: <stable@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-04 22:28:14 +01:00
..
atm drivers: usb: atm: ueagle-atm: Add missing const qualifier 2011-07-08 14:51:30 -07:00
c67x00 Fix common misspellings 2011-03-31 11:26:23 -03:00
class Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2011-10-25 15:18:39 +02:00
core USB: Update last_busy time after autosuspend fails 2011-11-04 22:28:14 +01:00
dwc3 usb: Add module.h to various dwc3 drivers 2011-10-04 10:27:28 -07:00
early USB: EHCI: Support controllers with big endian capability regs 2011-05-03 11:43:21 -07:00
gadget Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2011-10-25 12:23:15 +02:00
host Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2011-11-03 13:28:14 -07:00
image atomic: use <linux/atomic.h> 2011-07-26 16:49:47 -07:00
misc usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
mon usbmon vs. tcpdump: fix dropped packet count 2011-09-26 15:36:07 -07:00
musb Merge branch 'depends/rmk/gpio' into next/devel 2011-10-31 23:46:42 +01:00
otg USB: irq: Remove IRQF_DISABLED 2011-09-18 01:39:36 -07:00
renesas_usbhs usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push() 2011-10-19 13:29:11 -07:00
serial Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2011-10-25 15:18:39 +02:00
storage Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2011-10-25 12:23:15 +02:00
wusbcore USB: use usb_endpoint_maxp() instead of le16_to_cpu() 2011-08-23 09:47:40 -07:00
Kconfig Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2011-11-03 13:28:14 -07:00
Makefile usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
README
usb-common.c usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
usb-skeleton.c USB: use usb_endpoint_maxp() instead of le16_to_cpu() 2011-08-23 09:47:40 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.