remarkable-linux/drivers/scsi/libsas/sas_port.c
Dan Williams 303694eeee [SCSI] libsas: suspend / resume support
libsas power management routines to suspend and recover the sas domain
based on a model where the lldd is allowed and expected to be
"forgetful".

sas_suspend_ha - disable event processing allowing the lldd to take down
                 links without concern for causing hotplug events.
                 Regardless of whether the lldd actually posts link down
                 messages libsas notifies the lldd that all
                 domain_devices are gone.

sas_prep_resume_ha - on the way back up before the lldd starts link
                     training clean out any spurious events that were
                     generated on the way down, and re-enable event
                     processing

sas_resume_ha - after the lldd has started and decided that all phys
		have posted link-up events this routine is called to let
		libsas start it's own timeout of any phys that did not
		resume.  After the timeout an lldd can cancel the
                phy teardown by posting a link-up event.

Storage for ex_change_count (u16) and phy_change_count (u8) are changed
to int so they can be set to -1 to indicate 'invalidated'.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24 13:10:23 +04:00

356 lines
9.2 KiB
C

/*
* Serial Attached SCSI (SAS) Port class
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "sas_internal.h"
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_sas.h>
#include "../scsi_sas_internal.h"
static bool phy_is_wideport_member(struct asd_sas_port *port, struct asd_sas_phy *phy)
{
struct sas_ha_struct *sas_ha = phy->ha;
if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
SAS_ADDR_SIZE) != 0 || (sas_ha->strict_wide_ports &&
memcmp(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE) != 0))
return false;
return true;
}
static void sas_resume_port(struct asd_sas_phy *phy)
{
struct domain_device *dev;
struct asd_sas_port *port = phy->port;
struct sas_ha_struct *sas_ha = phy->ha;
struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt);
if (si->dft->lldd_port_formed)
si->dft->lldd_port_formed(phy);
if (port->suspended)
port->suspended = 0;
else {
/* we only need to handle "link returned" actions once */
return;
}
/* if the port came back:
* 1/ presume every device came back
* 2/ force the next revalidation to check all expander phys
*/
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
int i, rc;
rc = sas_notify_lldd_dev_found(dev);
if (rc) {
sas_unregister_dev(port, dev);
continue;
}
if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
dev->ex_dev.ex_change_count = -1;
for (i = 0; i < dev->ex_dev.num_phys; i++) {
struct ex_phy *phy = &dev->ex_dev.ex_phy[i];
phy->phy_change_count = -1;
}
}
}
sas_discover_event(port, DISCE_RESUME);
}
/**
* sas_form_port -- add this phy to a port
* @phy: the phy of interest
*
* This function adds this phy to an existing port, thus creating a wide
* port, or it creates a port and adds the phy to the port.
*/
static void sas_form_port(struct asd_sas_phy *phy)
{
int i;
struct sas_ha_struct *sas_ha = phy->ha;
struct asd_sas_port *port = phy->port;
struct sas_internal *si =
to_sas_internal(sas_ha->core.shost->transportt);
unsigned long flags;
if (port) {
if (!phy_is_wideport_member(port, phy))
sas_deform_port(phy, 0);
else if (phy->suspended) {
phy->suspended = 0;
sas_resume_port(phy);
/* phy came back, try to cancel the timeout */
wake_up(&sas_ha->eh_wait_q);
return;
} else {
SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
__func__, phy->id, phy->port->id,
phy->port->num_phys);
return;
}
}
/* see if the phy should be part of a wide port */
spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
for (i = 0; i < sas_ha->num_phys; i++) {
port = sas_ha->sas_port[i];
spin_lock(&port->phy_list_lock);
if (*(u64 *) port->sas_addr &&
phy_is_wideport_member(port, phy) && port->num_phys > 0) {
/* wide port */
SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
port->id);
break;
}
spin_unlock(&port->phy_list_lock);
}
/* The phy does not match any existing port, create a new one */
if (i == sas_ha->num_phys) {
for (i = 0; i < sas_ha->num_phys; i++) {
port = sas_ha->sas_port[i];
spin_lock(&port->phy_list_lock);
if (*(u64 *)port->sas_addr == 0
&& port->num_phys == 0) {
memcpy(port->sas_addr, phy->sas_addr,
SAS_ADDR_SIZE);
break;
}
spin_unlock(&port->phy_list_lock);
}
}
if (i >= sas_ha->num_phys) {
printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
__func__);
spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
return;
}
/* add the phy to the port */
list_add_tail(&phy->port_phy_el, &port->phy_list);
sas_phy_set_target(phy, port->port_dev);
phy->port = port;
port->num_phys++;
port->phy_mask |= (1U << phy->id);
if (*(u64 *)port->attached_sas_addr == 0) {
port->class = phy->class;
memcpy(port->attached_sas_addr, phy->attached_sas_addr,
SAS_ADDR_SIZE);
port->iproto = phy->iproto;
port->tproto = phy->tproto;
port->oob_mode = phy->oob_mode;
port->linkrate = phy->linkrate;
} else
port->linkrate = max(port->linkrate, phy->linkrate);
spin_unlock(&port->phy_list_lock);
spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
if (!port->port) {
port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
BUG_ON(!port->port);
sas_port_add(port->port);
}
sas_port_add_phy(port->port, phy->phy);
SAS_DPRINTK("%s added to %s, phy_mask:0x%x (%16llx)\n",
dev_name(&phy->phy->dev), dev_name(&port->port->dev),
port->phy_mask,
SAS_ADDR(port->attached_sas_addr));
if (port->port_dev)
port->port_dev->pathways = port->num_phys;
/* Tell the LLDD about this port formation. */
if (si->dft->lldd_port_formed)
si->dft->lldd_port_formed(phy);
sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
}
/**
* sas_deform_port -- remove this phy from the port it belongs to
* @phy: the phy of interest
*
* This is called when the physical link to the other phy has been
* lost (on this phy), in Event thread context. We cannot delay here.
*/
void sas_deform_port(struct asd_sas_phy *phy, int gone)
{
struct sas_ha_struct *sas_ha = phy->ha;
struct asd_sas_port *port = phy->port;
struct sas_internal *si =
to_sas_internal(sas_ha->core.shost->transportt);
struct domain_device *dev;
unsigned long flags;
if (!port)
return; /* done by a phy event */
dev = port->port_dev;
if (dev)
dev->pathways--;
if (port->num_phys == 1) {
sas_unregister_domain_devices(port, gone);
sas_port_delete(port->port);
port->port = NULL;
} else {
sas_port_delete_phy(port->port, phy->phy);
sas_device_set_phy(dev, port->port);
}
if (si->dft->lldd_port_deformed)
si->dft->lldd_port_deformed(phy);
spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
spin_lock(&port->phy_list_lock);
list_del_init(&phy->port_phy_el);
sas_phy_set_target(phy, NULL);
phy->port = NULL;
port->num_phys--;
port->phy_mask &= ~(1U << phy->id);
if (port->num_phys == 0) {
INIT_LIST_HEAD(&port->phy_list);
memset(port->sas_addr, 0, SAS_ADDR_SIZE);
memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
port->class = 0;
port->iproto = 0;
port->tproto = 0;
port->oob_mode = 0;
port->phy_mask = 0;
}
spin_unlock(&port->phy_list_lock);
spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
return;
}
/* ---------- SAS port events ---------- */
void sas_porte_bytes_dmaed(struct work_struct *work)
{
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
clear_bit(PORTE_BYTES_DMAED, &phy->port_events_pending);
sas_form_port(phy);
}
void sas_porte_broadcast_rcvd(struct work_struct *work)
{
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
unsigned long flags;
u32 prim;
clear_bit(PORTE_BROADCAST_RCVD, &phy->port_events_pending);
spin_lock_irqsave(&phy->sas_prim_lock, flags);
prim = phy->sas_prim;
spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
SAS_DPRINTK("broadcast received: %d\n", prim);
sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
}
void sas_porte_link_reset_err(struct work_struct *work)
{
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
clear_bit(PORTE_LINK_RESET_ERR, &phy->port_events_pending);
sas_deform_port(phy, 1);
}
void sas_porte_timer_event(struct work_struct *work)
{
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
clear_bit(PORTE_TIMER_EVENT, &phy->port_events_pending);
sas_deform_port(phy, 1);
}
void sas_porte_hard_reset(struct work_struct *work)
{
struct asd_sas_event *ev = to_asd_sas_event(work);
struct asd_sas_phy *phy = ev->phy;
clear_bit(PORTE_HARD_RESET, &phy->port_events_pending);
sas_deform_port(phy, 1);
}
/* ---------- SAS port registration ---------- */
static void sas_init_port(struct asd_sas_port *port,
struct sas_ha_struct *sas_ha, int i)
{
memset(port, 0, sizeof(*port));
port->id = i;
INIT_LIST_HEAD(&port->dev_list);
INIT_LIST_HEAD(&port->disco_list);
INIT_LIST_HEAD(&port->destroy_list);
spin_lock_init(&port->phy_list_lock);
INIT_LIST_HEAD(&port->phy_list);
port->ha = sas_ha;
spin_lock_init(&port->dev_list_lock);
}
int sas_register_ports(struct sas_ha_struct *sas_ha)
{
int i;
/* initialize the ports and discovery */
for (i = 0; i < sas_ha->num_phys; i++) {
struct asd_sas_port *port = sas_ha->sas_port[i];
sas_init_port(port, sas_ha, i);
sas_init_disc(&port->disc, port);
}
return 0;
}
void sas_unregister_ports(struct sas_ha_struct *sas_ha)
{
int i;
for (i = 0; i < sas_ha->num_phys; i++)
if (sas_ha->sas_phy[i]->port)
sas_deform_port(sas_ha->sas_phy[i], 0);
}