remarkable-linux/drivers/thunderbolt/tb.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

476 lines
14 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Thunderbolt Cactus Ridge driver - bus logic (NHI independent)
*
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
*/
#ifndef TB_H_
#define TB_H_
#include <linux/nvmem-provider.h>
#include <linux/pci.h>
#include <linux/uuid.h>
#include "tb_regs.h"
#include "ctl.h"
#include "dma_port.h"
/**
* struct tb_switch_nvm - Structure holding switch NVM information
* @major: Major version number of the active NVM portion
* @minor: Minor version number of the active NVM portion
* @id: Identifier used with both NVM portions
* @active: Active portion NVMem device
* @non_active: Non-active portion NVMem device
* @buf: Buffer where the NVM image is stored before it is written to
* the actual NVM flash device
* @buf_data_size: Number of bytes actually consumed by the new NVM
* image
* @authenticating: The switch is authenticating the new NVM
*/
struct tb_switch_nvm {
u8 major;
u8 minor;
int id;
struct nvmem_device *active;
struct nvmem_device *non_active;
void *buf;
size_t buf_data_size;
bool authenticating;
};
/**
* enum tb_security_level - Thunderbolt security level
* @TB_SECURITY_NONE: No security, legacy mode
* @TB_SECURITY_USER: User approval required at minimum
* @TB_SECURITY_SECURE: One time saved key required at minimum
* @TB_SECURITY_DPONLY: Only tunnel Display port (and USB)
*/
enum tb_security_level {
TB_SECURITY_NONE,
TB_SECURITY_USER,
TB_SECURITY_SECURE,
TB_SECURITY_DPONLY,
};
#define TB_SWITCH_KEY_SIZE 32
/* Each physical port contains 2 links on modern controllers */
#define TB_SWITCH_LINKS_PER_PHY_PORT 2
/**
* struct tb_switch - a thunderbolt switch
* @dev: Device for the switch
* @config: Switch configuration
* @ports: Ports in this switch
* @dma_port: If the switch has port supporting DMA configuration based
* mailbox this will hold the pointer to that (%NULL
* otherwise). If set it also means the switch has
* upgradeable NVM.
* @tb: Pointer to the domain the switch belongs to
* @uid: Unique ID of the switch
* @uuid: UUID of the switch (or %NULL if not supported)
* @vendor: Vendor ID of the switch
* @device: Device ID of the switch
* @vendor_name: Name of the vendor (or %NULL if not known)
* @device_name: Name of the device (or %NULL if not known)
* @generation: Switch Thunderbolt generation
* @cap_plug_events: Offset to the plug events capability (%0 if not found)
* @is_unplugged: The switch is going away
* @drom: DROM of the switch (%NULL if not found)
* @nvm: Pointer to the NVM if the switch has one (%NULL otherwise)
* @no_nvm_upgrade: Prevent NVM upgrade of this switch
* @safe_mode: The switch is in safe-mode
* @authorized: Whether the switch is authorized by user or policy
* @work: Work used to automatically authorize a switch
* @security_level: Switch supported security level
* @key: Contains the key used to challenge the device or %NULL if not
* supported. Size of the key is %TB_SWITCH_KEY_SIZE.
* @connection_id: Connection ID used with ICM messaging
* @connection_key: Connection key used with ICM messaging
* @link: Root switch link this switch is connected (ICM only)
* @depth: Depth in the chain this switch is connected (ICM only)
*
* When the switch is being added or removed to the domain (other
* switches) you need to have domain lock held. For switch authorization
* internal switch_lock is enough.
*/
struct tb_switch {
struct device dev;
struct tb_regs_switch_header config;
struct tb_port *ports;
struct tb_dma_port *dma_port;
struct tb *tb;
u64 uid;
uuid_t *uuid;
u16 vendor;
u16 device;
const char *vendor_name;
const char *device_name;
unsigned int generation;
int cap_plug_events;
bool is_unplugged;
u8 *drom;
struct tb_switch_nvm *nvm;
bool no_nvm_upgrade;
bool safe_mode;
unsigned int authorized;
struct work_struct work;
enum tb_security_level security_level;
u8 *key;
u8 connection_id;
u8 connection_key;
u8 link;
u8 depth;
};
/**
* struct tb_port - a thunderbolt port, part of a tb_switch
*/
struct tb_port {
struct tb_regs_port_header config;
struct tb_switch *sw;
struct tb_port *remote; /* remote port, NULL if not connected */
int cap_phy; /* offset, zero if not found */
u8 port; /* port number on switch */
bool disabled; /* disabled by eeprom */
struct tb_port *dual_link_port;
u8 link_nr:1;
};
/**
* struct tb_path_hop - routing information for a tb_path
*
* Hop configuration is always done on the IN port of a switch.
* in_port and out_port have to be on the same switch. Packets arriving on
* in_port with "hop" = in_hop_index will get routed to through out_port. The
* next hop to take (on out_port->remote) is determined by next_hop_index.
*
* in_counter_index is the index of a counter (in TB_CFG_COUNTERS) on the in
* port.
*/
struct tb_path_hop {
struct tb_port *in_port;
struct tb_port *out_port;
int in_hop_index;
int in_counter_index; /* write -1 to disable counters for this hop. */
int next_hop_index;
};
/**
* enum tb_path_port - path options mask
*/
enum tb_path_port {
TB_PATH_NONE = 0,
TB_PATH_SOURCE = 1, /* activate on the first hop (out of src) */
TB_PATH_INTERNAL = 2, /* activate on other hops (not the first/last) */
TB_PATH_DESTINATION = 4, /* activate on the last hop (into dst) */
TB_PATH_ALL = 7,
};
/**
* struct tb_path - a unidirectional path between two ports
*
* A path consists of a number of hops (see tb_path_hop). To establish a PCIe
* tunnel two paths have to be created between the two PCIe ports.
*
*/
struct tb_path {
struct tb *tb;
int nfc_credits; /* non flow controlled credits */
enum tb_path_port ingress_shared_buffer;
enum tb_path_port egress_shared_buffer;
enum tb_path_port ingress_fc_enable;
enum tb_path_port egress_fc_enable;
int priority:3;
int weight:4;
bool drop_packages;
bool activated;
struct tb_path_hop *hops;
int path_length; /* number of hops */
};
/**
* struct tb_cm_ops - Connection manager specific operations vector
* @driver_ready: Called right after control channel is started. Used by
* ICM to send driver ready message to the firmware.
* @start: Starts the domain
* @stop: Stops the domain
* @suspend_noirq: Connection manager specific suspend_noirq
* @resume_noirq: Connection manager specific resume_noirq
* @suspend: Connection manager specific suspend
* @complete: Connection manager specific complete
* @handle_event: Handle thunderbolt event
* @approve_switch: Approve switch
* @add_switch_key: Add key to switch
* @challenge_switch_key: Challenge switch using key
* @disconnect_pcie_paths: Disconnects PCIe paths before NVM update
*/
struct tb_cm_ops {
int (*driver_ready)(struct tb *tb);
int (*start)(struct tb *tb);
void (*stop)(struct tb *tb);
int (*suspend_noirq)(struct tb *tb);
int (*resume_noirq)(struct tb *tb);
int (*suspend)(struct tb *tb);
void (*complete)(struct tb *tb);
void (*handle_event)(struct tb *tb, enum tb_cfg_pkg_type,
const void *buf, size_t size);
int (*approve_switch)(struct tb *tb, struct tb_switch *sw);
int (*add_switch_key)(struct tb *tb, struct tb_switch *sw);
int (*challenge_switch_key)(struct tb *tb, struct tb_switch *sw,
const u8 *challenge, u8 *response);
int (*disconnect_pcie_paths)(struct tb *tb);
};
/**
* struct tb - main thunderbolt bus structure
* @dev: Domain device
* @lock: Big lock. Must be held when accessing any struct
* tb_switch / struct tb_port.
* @nhi: Pointer to the NHI structure
* @ctl: Control channel for this domain
* @wq: Ordered workqueue for all domain specific work
* @root_switch: Root switch of this domain
* @cm_ops: Connection manager specific operations vector
* @index: Linux assigned domain number
* @security_level: Current security level
* @privdata: Private connection manager specific data
*/
struct tb {
struct device dev;
struct mutex lock;
struct tb_nhi *nhi;
struct tb_ctl *ctl;
struct workqueue_struct *wq;
struct tb_switch *root_switch;
const struct tb_cm_ops *cm_ops;
int index;
enum tb_security_level security_level;
unsigned long privdata[0];
};
static inline void *tb_priv(struct tb *tb)
{
return (void *)tb->privdata;
}
/* helper functions & macros */
/**
* tb_upstream_port() - return the upstream port of a switch
*
* Every switch has an upstream port (for the root switch it is the NHI).
*
* During switch alloc/init tb_upstream_port()->remote may be NULL, even for
* non root switches (on the NHI port remote is always NULL).
*
* Return: Returns the upstream port of the switch.
*/
static inline struct tb_port *tb_upstream_port(struct tb_switch *sw)
{
return &sw->ports[sw->config.upstream_port_number];
}
static inline u64 tb_route(struct tb_switch *sw)
{
return ((u64) sw->config.route_hi) << 32 | sw->config.route_lo;
}
static inline struct tb_port *tb_port_at(u64 route, struct tb_switch *sw)
{
u8 port;
port = route >> (sw->config.depth * 8);
if (WARN_ON(port > sw->config.max_port_number))
return NULL;
return &sw->ports[port];
}
static inline int tb_sw_read(struct tb_switch *sw, void *buffer,
enum tb_cfg_space space, u32 offset, u32 length)
{
return tb_cfg_read(sw->tb->ctl,
buffer,
tb_route(sw),
0,
space,
offset,
length);
}
static inline int tb_sw_write(struct tb_switch *sw, void *buffer,
enum tb_cfg_space space, u32 offset, u32 length)
{
return tb_cfg_write(sw->tb->ctl,
buffer,
tb_route(sw),
0,
space,
offset,
length);
}
static inline int tb_port_read(struct tb_port *port, void *buffer,
enum tb_cfg_space space, u32 offset, u32 length)
{
return tb_cfg_read(port->sw->tb->ctl,
buffer,
tb_route(port->sw),
port->port,
space,
offset,
length);
}
static inline int tb_port_write(struct tb_port *port, const void *buffer,
enum tb_cfg_space space, u32 offset, u32 length)
{
return tb_cfg_write(port->sw->tb->ctl,
buffer,
tb_route(port->sw),
port->port,
space,
offset,
length);
}
#define tb_err(tb, fmt, arg...) dev_err(&(tb)->nhi->pdev->dev, fmt, ## arg)
#define tb_WARN(tb, fmt, arg...) dev_WARN(&(tb)->nhi->pdev->dev, fmt, ## arg)
#define tb_warn(tb, fmt, arg...) dev_warn(&(tb)->nhi->pdev->dev, fmt, ## arg)
#define tb_info(tb, fmt, arg...) dev_info(&(tb)->nhi->pdev->dev, fmt, ## arg)
#define __TB_SW_PRINT(level, sw, fmt, arg...) \
do { \
struct tb_switch *__sw = (sw); \
level(__sw->tb, "%llx: " fmt, \
tb_route(__sw), ## arg); \
} while (0)
#define tb_sw_WARN(sw, fmt, arg...) __TB_SW_PRINT(tb_WARN, sw, fmt, ##arg)
#define tb_sw_warn(sw, fmt, arg...) __TB_SW_PRINT(tb_warn, sw, fmt, ##arg)
#define tb_sw_info(sw, fmt, arg...) __TB_SW_PRINT(tb_info, sw, fmt, ##arg)
#define __TB_PORT_PRINT(level, _port, fmt, arg...) \
do { \
struct tb_port *__port = (_port); \
level(__port->sw->tb, "%llx:%x: " fmt, \
tb_route(__port->sw), __port->port, ## arg); \
} while (0)
#define tb_port_WARN(port, fmt, arg...) \
__TB_PORT_PRINT(tb_WARN, port, fmt, ##arg)
#define tb_port_warn(port, fmt, arg...) \
__TB_PORT_PRINT(tb_warn, port, fmt, ##arg)
#define tb_port_info(port, fmt, arg...) \
__TB_PORT_PRINT(tb_info, port, fmt, ##arg)
struct tb *icm_probe(struct tb_nhi *nhi);
struct tb *tb_probe(struct tb_nhi *nhi);
extern struct bus_type tb_bus_type;
extern struct device_type tb_domain_type;
extern struct device_type tb_switch_type;
int tb_domain_init(void);
void tb_domain_exit(void);
void tb_switch_exit(void);
struct tb *tb_domain_alloc(struct tb_nhi *nhi, size_t privsize);
int tb_domain_add(struct tb *tb);
void tb_domain_remove(struct tb *tb);
int tb_domain_suspend_noirq(struct tb *tb);
int tb_domain_resume_noirq(struct tb *tb);
int tb_domain_suspend(struct tb *tb);
void tb_domain_complete(struct tb *tb);
int tb_domain_approve_switch(struct tb *tb, struct tb_switch *sw);
int tb_domain_approve_switch_key(struct tb *tb, struct tb_switch *sw);
int tb_domain_challenge_switch_key(struct tb *tb, struct tb_switch *sw);
int tb_domain_disconnect_pcie_paths(struct tb *tb);
static inline void tb_domain_put(struct tb *tb)
{
put_device(&tb->dev);
}
struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent,
u64 route);
struct tb_switch *tb_switch_alloc_safe_mode(struct tb *tb,
struct device *parent, u64 route);
int tb_switch_configure(struct tb_switch *sw);
int tb_switch_add(struct tb_switch *sw);
void tb_switch_remove(struct tb_switch *sw);
void tb_switch_suspend(struct tb_switch *sw);
int tb_switch_resume(struct tb_switch *sw);
int tb_switch_reset(struct tb *tb, u64 route);
void tb_sw_set_unplugged(struct tb_switch *sw);
struct tb_switch *get_switch_at_route(struct tb_switch *sw, u64 route);
struct tb_switch *tb_switch_find_by_link_depth(struct tb *tb, u8 link,
u8 depth);
struct tb_switch *tb_switch_find_by_uuid(struct tb *tb, const uuid_t *uuid);
static inline unsigned int tb_switch_phy_port_from_link(unsigned int link)
{
return (link - 1) / TB_SWITCH_LINKS_PER_PHY_PORT;
}
static inline void tb_switch_put(struct tb_switch *sw)
{
put_device(&sw->dev);
}
static inline bool tb_is_switch(const struct device *dev)
{
return dev->type == &tb_switch_type;
}
static inline struct tb_switch *tb_to_switch(struct device *dev)
{
if (tb_is_switch(dev))
return container_of(dev, struct tb_switch, dev);
return NULL;
}
int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged);
int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_clear_counter(struct tb_port *port, int counter);
int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec);
int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap);
struct tb_path *tb_path_alloc(struct tb *tb, int num_hops);
void tb_path_free(struct tb_path *path);
int tb_path_activate(struct tb_path *path);
void tb_path_deactivate(struct tb_path *path);
bool tb_path_is_invalid(struct tb_path *path);
int tb_drom_read(struct tb_switch *sw);
int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid);
static inline int tb_route_length(u64 route)
{
return (fls64(route) + TB_ROUTE_SHIFT - 1) / TB_ROUTE_SHIFT;
}
static inline bool tb_is_upstream_port(struct tb_port *port)
{
return port == tb_upstream_port(port->sw);
}
/**
* tb_downstream_route() - get route to downstream switch
*
* Port must not be the upstream port (otherwise a loop is created).
*
* Return: Returns a route to the switch behind @port.
*/
static inline u64 tb_downstream_route(struct tb_port *port)
{
return tb_route(port->sw)
| ((u64) port->port << (port->sw->config.depth * 8));
}
#endif