remarkable-linux/drivers/usb
Peter Chen 990919cad5 usb: common: otg-fsm: only signal connect after switching to peripheral
We should signal connect (pull up dp) after we have already
at peripheral mode, otherwise, the dp may be toggled due to
we reset controller or do disconnect during the initialization
for peripheral, then, the host may be confused during the
enumeration, eg, it finds the reset can't succeed, but the
device is still there, see below error message.

hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1

Fixes: the issue existed when the otg fsm code was added.
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:28:15 -05:00
..
atm
c67x00 usb: c67x00: drop owner assignment from platform_drivers 2014-10-20 16:21:46 +02:00
chipidea usb: chipidea: udc: apply new usb_udc_vbus_handler interface 2015-03-19 11:26:19 -05:00
class cdc-acm: Add support for Denso cradle CU-321 2015-02-24 08:38:47 -08:00
common usb: common: otg-fsm: only signal connect after switching to peripheral 2015-03-19 11:28:15 -05:00
core USB: usbfs: don't leak kernel data in siginfo 2015-02-24 08:38:46 -08:00
dwc2 usb: dwc2: avoid leaking DMA channels on disconnection 2015-03-19 11:22:57 -05:00
dwc3 usb: dwc3: make LPM configurable in DT 2015-03-10 15:33:33 -05:00
early
gadget usb: udc: add usb_udc_vbus_handler 2015-03-19 11:26:03 -05:00
host xhci: Workaround for PME stuck issues in Intel xhci 2015-03-06 09:47:48 -08:00
image USB: use %*ph specifier in mikrotek driver 2015-01-09 11:37:18 -08:00
isp1760 usb: isp1760: add peripheral/device controller chip id 2015-03-10 15:33:24 -05:00
misc USB: use %*ph specifier in uss720 driver 2015-01-09 11:37:18 -08:00
mon
musb usb: musb: cppi41: fix condition to call cppi41_trans_done(). 2015-03-11 11:34:37 -05:00
phy usb: phy: Find the right match in devm_usb_phy_match 2015-03-19 11:28:14 -05:00
renesas_usbhs usb: renesas_usbhs: add support for USB-DMAC 2015-03-13 10:41:19 -05:00
serial USB fixes for 4.0-rc3 2015-03-08 12:47:18 -07:00
storage usb-storage: support for more than 8 LUNs 2015-02-24 08:38:46 -08:00
usbip usbip: vhci_hcd: use HUB_CHAR_* 2015-01-25 21:02:33 +08:00
wusbcore USB patches for 3.20-rc1 2015-02-15 10:24:55 -08:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.