remarkable-linux/net/wireless/sme.c
Linus Torvalds ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00

1212 lines
32 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* SME code for cfg80211
* both driver SME event handling and the SME implementation
* (for nl80211's connect() and wext)
*
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
* Copyright (C) 2009 Intel Corporation. All rights reserved.
* Copyright 2017 Intel Deutschland GmbH
*/
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
#include <linux/export.h>
#include <net/iw_handler.h>
#include <net/cfg80211.h>
#include <net/rtnetlink.h>
#include "nl80211.h"
#include "reg.h"
#include "rdev-ops.h"
/*
* Software SME in cfg80211, using auth/assoc/deauth calls to the
* driver. This is is for implementing nl80211's connect/disconnect
* and wireless extensions (if configured.)
*/
struct cfg80211_conn {
struct cfg80211_connect_params params;
/* these are sub-states of the _CONNECTING sme_state */
enum {
CFG80211_CONN_SCANNING,
CFG80211_CONN_SCAN_AGAIN,
CFG80211_CONN_AUTHENTICATE_NEXT,
CFG80211_CONN_AUTHENTICATING,
CFG80211_CONN_AUTH_FAILED_TIMEOUT,
CFG80211_CONN_ASSOCIATE_NEXT,
CFG80211_CONN_ASSOCIATING,
CFG80211_CONN_ASSOC_FAILED,
CFG80211_CONN_ASSOC_FAILED_TIMEOUT,
CFG80211_CONN_DEAUTH,
CFG80211_CONN_ABANDON,
CFG80211_CONN_CONNECTED,
} state;
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
const u8 *ie;
size_t ie_len;
bool auto_auth, prev_bssid_valid;
};
static void cfg80211_sme_free(struct wireless_dev *wdev)
{
if (!wdev->conn)
return;
kfree(wdev->conn->ie);
kfree(wdev->conn);
wdev->conn = NULL;
}
static int cfg80211_conn_scan(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_scan_request *request;
int n_channels, err;
ASSERT_RTNL();
ASSERT_WDEV_LOCK(wdev);
if (rdev->scan_req || rdev->scan_msg)
return -EBUSY;
if (wdev->conn->params.channel)
n_channels = 1;
else
n_channels = ieee80211_get_num_supported_channels(wdev->wiphy);
request = kzalloc(sizeof(*request) + sizeof(request->ssids[0]) +
sizeof(request->channels[0]) * n_channels,
GFP_KERNEL);
if (!request)
return -ENOMEM;
if (wdev->conn->params.channel) {
enum nl80211_band band = wdev->conn->params.channel->band;
struct ieee80211_supported_band *sband =
wdev->wiphy->bands[band];
if (!sband) {
kfree(request);
return -EINVAL;
}
request->channels[0] = wdev->conn->params.channel;
request->rates[band] = (1 << sband->n_bitrates) - 1;
} else {
int i = 0, j;
enum nl80211_band band;
struct ieee80211_supported_band *bands;
struct ieee80211_channel *channel;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
bands = wdev->wiphy->bands[band];
if (!bands)
continue;
for (j = 0; j < bands->n_channels; j++) {
channel = &bands->channels[j];
if (channel->flags & IEEE80211_CHAN_DISABLED)
continue;
request->channels[i++] = channel;
}
request->rates[band] = (1 << bands->n_bitrates) - 1;
}
n_channels = i;
}
request->n_channels = n_channels;
request->ssids = (void *)&request->channels[n_channels];
request->n_ssids = 1;
memcpy(request->ssids[0].ssid, wdev->conn->params.ssid,
wdev->conn->params.ssid_len);
request->ssids[0].ssid_len = wdev->conn->params.ssid_len;
eth_broadcast_addr(request->bssid);
request->wdev = wdev;
request->wiphy = &rdev->wiphy;
request->scan_start = jiffies;
rdev->scan_req = request;
err = rdev_scan(rdev, request);
if (!err) {
wdev->conn->state = CFG80211_CONN_SCANNING;
nl80211_send_scan_start(rdev, wdev);
dev_hold(wdev->netdev);
} else {
rdev->scan_req = NULL;
kfree(request);
}
return err;
}
static int cfg80211_conn_do_work(struct wireless_dev *wdev,
enum nl80211_timeout_reason *treason)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_connect_params *params;
struct cfg80211_assoc_request req = {};
int err;
ASSERT_WDEV_LOCK(wdev);
if (!wdev->conn)
return 0;
params = &wdev->conn->params;
switch (wdev->conn->state) {
case CFG80211_CONN_SCANNING:
/* didn't find it during scan ... */
return -ENOENT;
case CFG80211_CONN_SCAN_AGAIN:
return cfg80211_conn_scan(wdev);
case CFG80211_CONN_AUTHENTICATE_NEXT:
if (WARN_ON(!rdev->ops->auth))
return -EOPNOTSUPP;
wdev->conn->state = CFG80211_CONN_AUTHENTICATING;
return cfg80211_mlme_auth(rdev, wdev->netdev,
params->channel, params->auth_type,
params->bssid,
params->ssid, params->ssid_len,
NULL, 0,
params->key, params->key_len,
params->key_idx, NULL, 0);
case CFG80211_CONN_AUTH_FAILED_TIMEOUT:
*treason = NL80211_TIMEOUT_AUTH;
return -ENOTCONN;
case CFG80211_CONN_ASSOCIATE_NEXT:
if (WARN_ON(!rdev->ops->assoc))
return -EOPNOTSUPP;
wdev->conn->state = CFG80211_CONN_ASSOCIATING;
if (wdev->conn->prev_bssid_valid)
req.prev_bssid = wdev->conn->prev_bssid;
req.ie = params->ie;
req.ie_len = params->ie_len;
req.use_mfp = params->mfp != NL80211_MFP_NO;
req.crypto = params->crypto;
req.flags = params->flags;
req.ht_capa = params->ht_capa;
req.ht_capa_mask = params->ht_capa_mask;
req.vht_capa = params->vht_capa;
req.vht_capa_mask = params->vht_capa_mask;
err = cfg80211_mlme_assoc(rdev, wdev->netdev, params->channel,
params->bssid, params->ssid,
params->ssid_len, &req);
if (err)
cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING,
false);
return err;
case CFG80211_CONN_ASSOC_FAILED_TIMEOUT:
*treason = NL80211_TIMEOUT_ASSOC;
/* fall through */
case CFG80211_CONN_ASSOC_FAILED:
cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING, false);
return -ENOTCONN;
case CFG80211_CONN_DEAUTH:
cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING, false);
/* fall through */
case CFG80211_CONN_ABANDON:
/* free directly, disconnected event already sent */
cfg80211_sme_free(wdev);
return 0;
default:
return 0;
}
}
void cfg80211_conn_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev =
container_of(work, struct cfg80211_registered_device, conn_work);
struct wireless_dev *wdev;
u8 bssid_buf[ETH_ALEN], *bssid = NULL;
enum nl80211_timeout_reason treason;
rtnl_lock();
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (!wdev->netdev)
continue;
wdev_lock(wdev);
if (!netif_running(wdev->netdev)) {
wdev_unlock(wdev);
continue;
}
if (!wdev->conn ||
wdev->conn->state == CFG80211_CONN_CONNECTED) {
wdev_unlock(wdev);
continue;
}
if (wdev->conn->params.bssid) {
memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN);
bssid = bssid_buf;
}
treason = NL80211_TIMEOUT_UNSPECIFIED;
if (cfg80211_conn_do_work(wdev, &treason)) {
struct cfg80211_connect_resp_params cr;
memset(&cr, 0, sizeof(cr));
cr.status = -1;
cr.bssid = bssid;
cr.timeout_reason = treason;
__cfg80211_connect_result(wdev->netdev, &cr, false);
}
wdev_unlock(wdev);
}
rtnl_unlock();
}
/* Returned bss is reference counted and must be cleaned up appropriately. */
static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_bss *bss;
ASSERT_WDEV_LOCK(wdev);
bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel,
wdev->conn->params.bssid,
wdev->conn->params.ssid,
wdev->conn->params.ssid_len,
wdev->conn_bss_type,
IEEE80211_PRIVACY(wdev->conn->params.privacy));
if (!bss)
return NULL;
memcpy(wdev->conn->bssid, bss->bssid, ETH_ALEN);
wdev->conn->params.bssid = wdev->conn->bssid;
wdev->conn->params.channel = bss->channel;
wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
schedule_work(&rdev->conn_work);
return bss;
}
static void __cfg80211_sme_scan_done(struct net_device *dev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_bss *bss;
ASSERT_WDEV_LOCK(wdev);
if (!wdev->conn)
return;
if (wdev->conn->state != CFG80211_CONN_SCANNING &&
wdev->conn->state != CFG80211_CONN_SCAN_AGAIN)
return;
bss = cfg80211_get_conn_bss(wdev);
if (bss)
cfg80211_put_bss(&rdev->wiphy, bss);
else
schedule_work(&rdev->conn_work);
}
void cfg80211_sme_scan_done(struct net_device *dev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
wdev_lock(wdev);
__cfg80211_sme_scan_done(dev);
wdev_unlock(wdev);
}
void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
u16 status_code = le16_to_cpu(mgmt->u.auth.status_code);
ASSERT_WDEV_LOCK(wdev);
if (!wdev->conn || wdev->conn->state == CFG80211_CONN_CONNECTED)
return;
if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
wdev->conn->auto_auth &&
wdev->conn->params.auth_type != NL80211_AUTHTYPE_NETWORK_EAP) {
/* select automatically between only open, shared, leap */
switch (wdev->conn->params.auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
if (wdev->connect_keys)
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_SHARED_KEY;
else
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_NETWORK_EAP;
break;
case NL80211_AUTHTYPE_SHARED_KEY:
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_NETWORK_EAP;
break;
default:
/* huh? */
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_OPEN_SYSTEM;
break;
}
wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
schedule_work(&rdev->conn_work);
} else if (status_code != WLAN_STATUS_SUCCESS) {
struct cfg80211_connect_resp_params cr;
memset(&cr, 0, sizeof(cr));
cr.status = status_code;
cr.bssid = mgmt->bssid;
cr.timeout_reason = NL80211_TIMEOUT_UNSPECIFIED;
__cfg80211_connect_result(wdev->netdev, &cr, false);
} else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) {
wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
schedule_work(&rdev->conn_work);
}
}
bool cfg80211_sme_rx_assoc_resp(struct wireless_dev *wdev, u16 status)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return false;
if (status == WLAN_STATUS_SUCCESS) {
wdev->conn->state = CFG80211_CONN_CONNECTED;
return false;
}
if (wdev->conn->prev_bssid_valid) {
/*
* Some stupid APs don't accept reassoc, so we
* need to fall back to trying regular assoc;
* return true so no event is sent to userspace.
*/
wdev->conn->prev_bssid_valid = false;
wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
schedule_work(&rdev->conn_work);
return true;
}
wdev->conn->state = CFG80211_CONN_ASSOC_FAILED;
schedule_work(&rdev->conn_work);
return false;
}
void cfg80211_sme_deauth(struct wireless_dev *wdev)
{
cfg80211_sme_free(wdev);
}
void cfg80211_sme_auth_timeout(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return;
wdev->conn->state = CFG80211_CONN_AUTH_FAILED_TIMEOUT;
schedule_work(&rdev->conn_work);
}
void cfg80211_sme_disassoc(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return;
wdev->conn->state = CFG80211_CONN_DEAUTH;
schedule_work(&rdev->conn_work);
}
void cfg80211_sme_assoc_timeout(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return;
wdev->conn->state = CFG80211_CONN_ASSOC_FAILED_TIMEOUT;
schedule_work(&rdev->conn_work);
}
void cfg80211_sme_abandon_assoc(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return;
wdev->conn->state = CFG80211_CONN_ABANDON;
schedule_work(&rdev->conn_work);
}
static int cfg80211_sme_get_conn_ies(struct wireless_dev *wdev,
const u8 *ies, size_t ies_len,
const u8 **out_ies, size_t *out_ies_len)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
u8 *buf;
size_t offs;
if (!rdev->wiphy.extended_capabilities_len ||
(ies && cfg80211_find_ie(WLAN_EID_EXT_CAPABILITY, ies, ies_len))) {
*out_ies = kmemdup(ies, ies_len, GFP_KERNEL);
if (!*out_ies)
return -ENOMEM;
*out_ies_len = ies_len;
return 0;
}
buf = kmalloc(ies_len + rdev->wiphy.extended_capabilities_len + 2,
GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (ies_len) {
static const u8 before_extcapa[] = {
/* not listing IEs expected to be created by driver */
WLAN_EID_RSN,
WLAN_EID_QOS_CAPA,
WLAN_EID_RRM_ENABLED_CAPABILITIES,
WLAN_EID_MOBILITY_DOMAIN,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
WLAN_EID_BSS_COEX_2040,
};
offs = ieee80211_ie_split(ies, ies_len, before_extcapa,
ARRAY_SIZE(before_extcapa), 0);
memcpy(buf, ies, offs);
/* leave a whole for extended capabilities IE */
memcpy(buf + offs + rdev->wiphy.extended_capabilities_len + 2,
ies + offs, ies_len - offs);
} else {
offs = 0;
}
/* place extended capabilities IE (with only driver capabilities) */
buf[offs] = WLAN_EID_EXT_CAPABILITY;
buf[offs + 1] = rdev->wiphy.extended_capabilities_len;
memcpy(buf + offs + 2,
rdev->wiphy.extended_capabilities,
rdev->wiphy.extended_capabilities_len);
*out_ies = buf;
*out_ies_len = ies_len + rdev->wiphy.extended_capabilities_len + 2;
return 0;
}
static int cfg80211_sme_connect(struct wireless_dev *wdev,
struct cfg80211_connect_params *connect,
const u8 *prev_bssid)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_bss *bss;
int err;
if (!rdev->ops->auth || !rdev->ops->assoc)
return -EOPNOTSUPP;
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
wdev->current_bss = NULL;
cfg80211_sme_free(wdev);
}
if (WARN_ON(wdev->conn))
return -EINPROGRESS;
wdev->conn = kzalloc(sizeof(*wdev->conn), GFP_KERNEL);
if (!wdev->conn)
return -ENOMEM;
/*
* Copy all parameters, and treat explicitly IEs, BSSID, SSID.
*/
memcpy(&wdev->conn->params, connect, sizeof(*connect));
if (connect->bssid) {
wdev->conn->params.bssid = wdev->conn->bssid;
memcpy(wdev->conn->bssid, connect->bssid, ETH_ALEN);
}
if (cfg80211_sme_get_conn_ies(wdev, connect->ie, connect->ie_len,
&wdev->conn->ie,
&wdev->conn->params.ie_len)) {
kfree(wdev->conn);
wdev->conn = NULL;
return -ENOMEM;
}
wdev->conn->params.ie = wdev->conn->ie;
if (connect->auth_type == NL80211_AUTHTYPE_AUTOMATIC) {
wdev->conn->auto_auth = true;
/* start with open system ... should mostly work */
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_OPEN_SYSTEM;
} else {
wdev->conn->auto_auth = false;
}
wdev->conn->params.ssid = wdev->ssid;
wdev->conn->params.ssid_len = wdev->ssid_len;
/* see if we have the bss already */
bss = cfg80211_get_conn_bss(wdev);
if (prev_bssid) {
memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN);
wdev->conn->prev_bssid_valid = true;
}
/* we're good if we have a matching bss struct */
if (bss) {
enum nl80211_timeout_reason treason;
err = cfg80211_conn_do_work(wdev, &treason);
cfg80211_put_bss(wdev->wiphy, bss);
} else {
/* otherwise we'll need to scan for the AP first */
err = cfg80211_conn_scan(wdev);
/*
* If we can't scan right now, then we need to scan again
* after the current scan finished, since the parameters
* changed (unless we find a good AP anyway).
*/
if (err == -EBUSY) {
err = 0;
wdev->conn->state = CFG80211_CONN_SCAN_AGAIN;
}
}
if (err)
cfg80211_sme_free(wdev);
return err;
}
static int cfg80211_sme_disconnect(struct wireless_dev *wdev, u16 reason)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
int err;
if (!wdev->conn)
return 0;
if (!rdev->ops->deauth)
return -EOPNOTSUPP;
if (wdev->conn->state == CFG80211_CONN_SCANNING ||
wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) {
err = 0;
goto out;
}
/* wdev->conn->params.bssid must be set if > SCANNING */
err = cfg80211_mlme_deauth(rdev, wdev->netdev,
wdev->conn->params.bssid,
NULL, 0, reason, false);
out:
cfg80211_sme_free(wdev);
return err;
}
/*
* code shared for in-device and software SME
*/
static bool cfg80211_is_all_idle(void)
{
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
bool is_all_idle = true;
/*
* All devices must be idle as otherwise if you are actively
* scanning some new beacon hints could be learned and would
* count as new regulatory hints.
*/
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
wdev_lock(wdev);
if (wdev->conn || wdev->current_bss)
is_all_idle = false;
wdev_unlock(wdev);
}
}
return is_all_idle;
}
static void disconnect_work(struct work_struct *work)
{
rtnl_lock();
if (cfg80211_is_all_idle())
regulatory_hint_disconnect();
rtnl_unlock();
}
static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
/*
* API calls for drivers implementing connect/disconnect and
* SME event handling
*/
/* This method must consume bss one way or another */
void __cfg80211_connect_result(struct net_device *dev,
struct cfg80211_connect_resp_params *cr,
bool wextev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *country_ie;
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) {
cfg80211_put_bss(wdev->wiphy, cr->bss);
return;
}
nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev, cr,
GFP_KERNEL);
#ifdef CONFIG_CFG80211_WEXT
if (wextev) {
if (cr->req_ie && cr->status == WLAN_STATUS_SUCCESS) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = cr->req_ie_len;
wireless_send_event(dev, IWEVASSOCREQIE, &wrqu,
cr->req_ie);
}
if (cr->resp_ie && cr->status == WLAN_STATUS_SUCCESS) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = cr->resp_ie_len;
wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu,
cr->resp_ie);
}
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
if (cr->bssid && cr->status == WLAN_STATUS_SUCCESS) {
memcpy(wrqu.ap_addr.sa_data, cr->bssid, ETH_ALEN);
memcpy(wdev->wext.prev_bssid, cr->bssid, ETH_ALEN);
wdev->wext.prev_bssid_valid = true;
}
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
}
#endif
if (!cr->bss && (cr->status == WLAN_STATUS_SUCCESS)) {
WARN_ON_ONCE(!wiphy_to_rdev(wdev->wiphy)->ops->connect);
cr->bss = cfg80211_get_bss(wdev->wiphy, NULL, cr->bssid,
wdev->ssid, wdev->ssid_len,
wdev->conn_bss_type,
IEEE80211_PRIVACY_ANY);
if (cr->bss)
cfg80211_hold_bss(bss_from_pub(cr->bss));
}
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
wdev->current_bss = NULL;
}
if (cr->status != WLAN_STATUS_SUCCESS) {
kzfree(wdev->connect_keys);
wdev->connect_keys = NULL;
wdev->ssid_len = 0;
wdev->conn_owner_nlportid = 0;
if (cr->bss) {
cfg80211_unhold_bss(bss_from_pub(cr->bss));
cfg80211_put_bss(wdev->wiphy, cr->bss);
}
cfg80211_sme_free(wdev);
return;
}
if (WARN_ON(!cr->bss))
return;
wdev->current_bss = bss_from_pub(cr->bss);
if (!(wdev->wiphy->flags & WIPHY_FLAG_HAS_STATIC_WEP))
cfg80211_upload_connect_keys(wdev);
rcu_read_lock();
country_ie = ieee80211_bss_get_ie(cr->bss, WLAN_EID_COUNTRY);
if (!country_ie) {
rcu_read_unlock();
return;
}
country_ie = kmemdup(country_ie, 2 + country_ie[1], GFP_ATOMIC);
rcu_read_unlock();
if (!country_ie)
return;
/*
* ieee80211_bss_get_ie() ensures we can access:
* - country_ie + 2, the start of the country ie data, and
* - and country_ie[1] which is the IE length
*/
regulatory_hint_country_ie(wdev->wiphy, cr->bss->channel->band,
country_ie + 2, country_ie[1]);
kfree(country_ie);
}
/* Consumes bss object one way or another */
void cfg80211_connect_done(struct net_device *dev,
struct cfg80211_connect_resp_params *params,
gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_event *ev;
unsigned long flags;
u8 *next;
if (params->bss) {
/* Make sure the bss entry provided by the driver is valid. */
struct cfg80211_internal_bss *ibss = bss_from_pub(params->bss);
if (WARN_ON(list_empty(&ibss->list))) {
cfg80211_put_bss(wdev->wiphy, params->bss);
return;
}
}
ev = kzalloc(sizeof(*ev) + (params->bssid ? ETH_ALEN : 0) +
params->req_ie_len + params->resp_ie_len +
params->fils_kek_len + params->pmk_len +
(params->pmkid ? WLAN_PMKID_LEN : 0), gfp);
if (!ev) {
cfg80211_put_bss(wdev->wiphy, params->bss);
return;
}
ev->type = EVENT_CONNECT_RESULT;
next = ((u8 *)ev) + sizeof(*ev);
if (params->bssid) {
ev->cr.bssid = next;
memcpy((void *)ev->cr.bssid, params->bssid, ETH_ALEN);
next += ETH_ALEN;
}
if (params->req_ie_len) {
ev->cr.req_ie = next;
ev->cr.req_ie_len = params->req_ie_len;
memcpy((void *)ev->cr.req_ie, params->req_ie,
params->req_ie_len);
next += params->req_ie_len;
}
if (params->resp_ie_len) {
ev->cr.resp_ie = next;
ev->cr.resp_ie_len = params->resp_ie_len;
memcpy((void *)ev->cr.resp_ie, params->resp_ie,
params->resp_ie_len);
next += params->resp_ie_len;
}
if (params->fils_kek_len) {
ev->cr.fils_kek = next;
ev->cr.fils_kek_len = params->fils_kek_len;
memcpy((void *)ev->cr.fils_kek, params->fils_kek,
params->fils_kek_len);
next += params->fils_kek_len;
}
if (params->pmk_len) {
ev->cr.pmk = next;
ev->cr.pmk_len = params->pmk_len;
memcpy((void *)ev->cr.pmk, params->pmk, params->pmk_len);
next += params->pmk_len;
}
if (params->pmkid) {
ev->cr.pmkid = next;
memcpy((void *)ev->cr.pmkid, params->pmkid, WLAN_PMKID_LEN);
next += WLAN_PMKID_LEN;
}
ev->cr.update_erp_next_seq_num = params->update_erp_next_seq_num;
if (params->update_erp_next_seq_num)
ev->cr.fils_erp_next_seq_num = params->fils_erp_next_seq_num;
if (params->bss)
cfg80211_hold_bss(bss_from_pub(params->bss));
ev->cr.bss = params->bss;
ev->cr.status = params->status;
ev->cr.timeout_reason = params->timeout_reason;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
EXPORT_SYMBOL(cfg80211_connect_done);
/* Consumes bss object one way or another */
void __cfg80211_roamed(struct wireless_dev *wdev,
struct cfg80211_roam_info *info)
{
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT))
goto out;
if (WARN_ON(!wdev->current_bss))
goto out;
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
wdev->current_bss = NULL;
if (WARN_ON(!info->bss))
return;
cfg80211_hold_bss(bss_from_pub(info->bss));
wdev->current_bss = bss_from_pub(info->bss);
nl80211_send_roamed(wiphy_to_rdev(wdev->wiphy),
wdev->netdev, info, GFP_KERNEL);
#ifdef CONFIG_CFG80211_WEXT
if (info->req_ie) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = info->req_ie_len;
wireless_send_event(wdev->netdev, IWEVASSOCREQIE,
&wrqu, info->req_ie);
}
if (info->resp_ie) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = info->resp_ie_len;
wireless_send_event(wdev->netdev, IWEVASSOCRESPIE,
&wrqu, info->resp_ie);
}
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(wrqu.ap_addr.sa_data, info->bss->bssid, ETH_ALEN);
memcpy(wdev->wext.prev_bssid, info->bss->bssid, ETH_ALEN);
wdev->wext.prev_bssid_valid = true;
wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL);
#endif
return;
out:
cfg80211_put_bss(wdev->wiphy, info->bss);
}
/* Consumes info->bss object one way or another */
void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_event *ev;
unsigned long flags;
if (!info->bss) {
info->bss = cfg80211_get_bss(wdev->wiphy, info->channel,
info->bssid, wdev->ssid,
wdev->ssid_len,
wdev->conn_bss_type,
IEEE80211_PRIVACY_ANY);
}
if (WARN_ON(!info->bss))
return;
ev = kzalloc(sizeof(*ev) + info->req_ie_len + info->resp_ie_len, gfp);
if (!ev) {
cfg80211_put_bss(wdev->wiphy, info->bss);
return;
}
ev->type = EVENT_ROAMED;
ev->rm.req_ie = ((u8 *)ev) + sizeof(*ev);
ev->rm.req_ie_len = info->req_ie_len;
memcpy((void *)ev->rm.req_ie, info->req_ie, info->req_ie_len);
ev->rm.resp_ie = ((u8 *)ev) + sizeof(*ev) + info->req_ie_len;
ev->rm.resp_ie_len = info->resp_ie_len;
memcpy((void *)ev->rm.resp_ie, info->resp_ie, info->resp_ie_len);
ev->rm.bss = info->bss;
ev->rm.authorized = info->authorized;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
EXPORT_SYMBOL(cfg80211_roamed);
void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
size_t ie_len, u16 reason, bool from_ap)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
int i;
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT))
return;
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
}
wdev->current_bss = NULL;
wdev->ssid_len = 0;
wdev->conn_owner_nlportid = 0;
nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap);
/* stop critical protocol if supported */
if (rdev->ops->crit_proto_stop && rdev->crit_proto_nlportid) {
rdev->crit_proto_nlportid = 0;
rdev_crit_proto_stop(rdev, wdev);
}
/*
* Delete all the keys ... pairwise keys can't really
* exist any more anyway, but default keys might.
*/
if (rdev->ops->del_key)
for (i = 0; i < 6; i++)
rdev_del_key(rdev, dev, i, false, NULL);
rdev_set_qos_map(rdev, dev, NULL);
#ifdef CONFIG_CFG80211_WEXT
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
wdev->wext.connect.ssid_len = 0;
#endif
schedule_work(&cfg80211_disconnect_work);
}
void cfg80211_disconnected(struct net_device *dev, u16 reason,
const u8 *ie, size_t ie_len,
bool locally_generated, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_event *ev;
unsigned long flags;
ev = kzalloc(sizeof(*ev) + ie_len, gfp);
if (!ev)
return;
ev->type = EVENT_DISCONNECTED;
ev->dc.ie = ((u8 *)ev) + sizeof(*ev);
ev->dc.ie_len = ie_len;
memcpy((void *)ev->dc.ie, ie, ie_len);
ev->dc.reason = reason;
ev->dc.locally_generated = locally_generated;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
EXPORT_SYMBOL(cfg80211_disconnected);
/*
* API calls for nl80211/wext compatibility code
*/
int cfg80211_connect(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct cfg80211_connect_params *connect,
struct cfg80211_cached_keys *connkeys,
const u8 *prev_bssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
ASSERT_WDEV_LOCK(wdev);
/*
* If we have an ssid_len, we're trying to connect or are
* already connected, so reject a new SSID unless it's the
* same (which is the case for re-association.)
*/
if (wdev->ssid_len &&
(wdev->ssid_len != connect->ssid_len ||
memcmp(wdev->ssid, connect->ssid, wdev->ssid_len)))
return -EALREADY;
/*
* If connected, reject (re-)association unless prev_bssid
* matches the current BSSID.
*/
if (wdev->current_bss) {
if (!prev_bssid)
return -EALREADY;
if (!ether_addr_equal(prev_bssid, wdev->current_bss->pub.bssid))
return -ENOTCONN;
}
/*
* Reject if we're in the process of connecting with WEP,
* this case isn't very interesting and trying to handle
* it would make the code much more complex.
*/
if (wdev->connect_keys)
return -EINPROGRESS;
cfg80211_oper_and_ht_capa(&connect->ht_capa_mask,
rdev->wiphy.ht_capa_mod_mask);
if (connkeys && connkeys->def >= 0) {
int idx;
u32 cipher;
idx = connkeys->def;
cipher = connkeys->params[idx].cipher;
/* If given a WEP key we may need it for shared key auth */
if (cipher == WLAN_CIPHER_SUITE_WEP40 ||
cipher == WLAN_CIPHER_SUITE_WEP104) {
connect->key_idx = idx;
connect->key = connkeys->params[idx].key;
connect->key_len = connkeys->params[idx].key_len;
/*
* If ciphers are not set (e.g. when going through
* iwconfig), we have to set them appropriately here.
*/
if (connect->crypto.cipher_group == 0)
connect->crypto.cipher_group = cipher;
if (connect->crypto.n_ciphers_pairwise == 0) {
connect->crypto.n_ciphers_pairwise = 1;
connect->crypto.ciphers_pairwise[0] = cipher;
}
}
connect->crypto.wep_keys = connkeys->params;
connect->crypto.wep_tx_key = connkeys->def;
} else {
if (WARN_ON(connkeys))
return -EINVAL;
}
wdev->connect_keys = connkeys;
memcpy(wdev->ssid, connect->ssid, connect->ssid_len);
wdev->ssid_len = connect->ssid_len;
wdev->conn_bss_type = connect->pbss ? IEEE80211_BSS_TYPE_PBSS :
IEEE80211_BSS_TYPE_ESS;
if (!rdev->ops->connect)
err = cfg80211_sme_connect(wdev, connect, prev_bssid);
else
err = rdev_connect(rdev, dev, connect);
if (err) {
wdev->connect_keys = NULL;
/*
* This could be reassoc getting refused, don't clear
* ssid_len in that case.
*/
if (!wdev->current_bss)
wdev->ssid_len = 0;
return err;
}
return 0;
}
int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
struct net_device *dev, u16 reason, bool wextev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err = 0;
ASSERT_WDEV_LOCK(wdev);
kzfree(wdev->connect_keys);
wdev->connect_keys = NULL;
wdev->conn_owner_nlportid = 0;
if (wdev->conn)
err = cfg80211_sme_disconnect(wdev, reason);
else if (!rdev->ops->disconnect)
cfg80211_mlme_down(rdev, dev);
else if (wdev->ssid_len)
err = rdev_disconnect(rdev, dev, reason);
/*
* Clear ssid_len unless we actually were fully connected,
* in which case cfg80211_disconnected() will take care of
* this later.
*/
if (!wdev->current_bss)
wdev->ssid_len = 0;
return err;
}
/*
* Used to clean up after the connection / connection attempt owner socket
* disconnects
*/
void cfg80211_autodisconnect_wk(struct work_struct *work)
{
struct wireless_dev *wdev =
container_of(work, struct wireless_dev, disconnect_wk);
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
wdev_lock(wdev);
if (wdev->conn_owner_nlportid) {
/*
* Use disconnect_bssid if still connecting and ops->disconnect
* not implemented. Otherwise we can use cfg80211_disconnect.
*/
if (rdev->ops->disconnect || wdev->current_bss)
cfg80211_disconnect(rdev, wdev->netdev,
WLAN_REASON_DEAUTH_LEAVING, true);
else
cfg80211_mlme_deauth(rdev, wdev->netdev,
wdev->disconnect_bssid, NULL, 0,
WLAN_REASON_DEAUTH_LEAVING, false);
}
wdev_unlock(wdev);
}