![Rafael J. Wysocki](/assets/img/avatar_default.png)
The ACPI specification requires the _PSC method to be present under a device object if its power state cannot be inferred from the states of power resources used by it (ACPI 5, Section 7.6.2). However, it also requires that (for power states D0-D2 and D3hot) if the _PSn (n = 0, 1, 2, 3) method is present under the device object, it also must be executed after the power resources have been set appropriately for the device to go into power state Dn (D3 means D3hot in this case). Thus it is not clear from the specification whether or not the _PSn method should be executed if the initial configuraion of power resources used by the device indicates power state Dn and the _PSC method is not present. The current implementation of acpi_bus_init_power() is based on the assumption that it should not be necessary to execute _PSn in the above situation, but experience shows that in fact that assumption need not be satisfied. For this reason, make acpi_bus_init_power() always execute _PSn if the initial configuration of device power resources indicates power state Dn. Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1022 lines
29 KiB
C
1022 lines
29 KiB
C
/*
|
|
* drivers/acpi/device_pm.c - ACPI device power management routines.
|
|
*
|
|
* Copyright (C) 2012, Intel Corp.
|
|
* Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
*
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
|
|
*
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/export.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/pm_qos.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <acpi/acpi.h>
|
|
#include <acpi/acpi_bus.h>
|
|
#include <acpi/acpi_drivers.h>
|
|
|
|
#include "internal.h"
|
|
|
|
#define _COMPONENT ACPI_POWER_COMPONENT
|
|
ACPI_MODULE_NAME("device_pm");
|
|
|
|
static DEFINE_MUTEX(acpi_pm_notifier_lock);
|
|
|
|
/**
|
|
* acpi_add_pm_notifier - Register PM notifier for given ACPI device.
|
|
* @adev: ACPI device to add the notifier for.
|
|
* @context: Context information to pass to the notifier routine.
|
|
*
|
|
* NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
|
|
* PM wakeup events. For example, wakeup events may be generated for bridges
|
|
* if one of the devices below the bridge is signaling wakeup, even if the
|
|
* bridge itself doesn't have a wakeup GPE associated with it.
|
|
*/
|
|
acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
|
|
acpi_notify_handler handler, void *context)
|
|
{
|
|
acpi_status status = AE_ALREADY_EXISTS;
|
|
|
|
mutex_lock(&acpi_pm_notifier_lock);
|
|
|
|
if (adev->wakeup.flags.notifier_present)
|
|
goto out;
|
|
|
|
status = acpi_install_notify_handler(adev->handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handler, context);
|
|
if (ACPI_FAILURE(status))
|
|
goto out;
|
|
|
|
adev->wakeup.flags.notifier_present = true;
|
|
|
|
out:
|
|
mutex_unlock(&acpi_pm_notifier_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
|
|
* @adev: ACPI device to remove the notifier from.
|
|
*/
|
|
acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
|
|
acpi_notify_handler handler)
|
|
{
|
|
acpi_status status = AE_BAD_PARAMETER;
|
|
|
|
mutex_lock(&acpi_pm_notifier_lock);
|
|
|
|
if (!adev->wakeup.flags.notifier_present)
|
|
goto out;
|
|
|
|
status = acpi_remove_notify_handler(adev->handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
handler);
|
|
if (ACPI_FAILURE(status))
|
|
goto out;
|
|
|
|
adev->wakeup.flags.notifier_present = false;
|
|
|
|
out:
|
|
mutex_unlock(&acpi_pm_notifier_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* acpi_power_state_string - String representation of ACPI device power state.
|
|
* @state: ACPI device power state to return the string representation of.
|
|
*/
|
|
const char *acpi_power_state_string(int state)
|
|
{
|
|
switch (state) {
|
|
case ACPI_STATE_D0:
|
|
return "D0";
|
|
case ACPI_STATE_D1:
|
|
return "D1";
|
|
case ACPI_STATE_D2:
|
|
return "D2";
|
|
case ACPI_STATE_D3_HOT:
|
|
return "D3hot";
|
|
case ACPI_STATE_D3_COLD:
|
|
return "D3";
|
|
default:
|
|
return "(unknown)";
|
|
}
|
|
}
|
|
|
|
/**
|
|
* acpi_device_get_power - Get power state of an ACPI device.
|
|
* @device: Device to get the power state of.
|
|
* @state: Place to store the power state of the device.
|
|
*
|
|
* This function does not update the device's power.state field, but it may
|
|
* update its parent's power.state field (when the parent's power state is
|
|
* unknown and the device's power state turns out to be D0).
|
|
*/
|
|
int acpi_device_get_power(struct acpi_device *device, int *state)
|
|
{
|
|
int result = ACPI_STATE_UNKNOWN;
|
|
|
|
if (!device || !state)
|
|
return -EINVAL;
|
|
|
|
if (!device->flags.power_manageable) {
|
|
/* TBD: Non-recursive algorithm for walking up hierarchy. */
|
|
*state = device->parent ?
|
|
device->parent->power.state : ACPI_STATE_D0;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Get the device's power state either directly (via _PSC) or
|
|
* indirectly (via power resources).
|
|
*/
|
|
if (device->power.flags.explicit_get) {
|
|
unsigned long long psc;
|
|
acpi_status status = acpi_evaluate_integer(device->handle,
|
|
"_PSC", NULL, &psc);
|
|
if (ACPI_FAILURE(status))
|
|
return -ENODEV;
|
|
|
|
result = psc;
|
|
}
|
|
/* The test below covers ACPI_STATE_UNKNOWN too. */
|
|
if (result <= ACPI_STATE_D2) {
|
|
; /* Do nothing. */
|
|
} else if (device->power.flags.power_resources) {
|
|
int error = acpi_power_get_inferred_state(device, &result);
|
|
if (error)
|
|
return error;
|
|
} else if (result == ACPI_STATE_D3_HOT) {
|
|
result = ACPI_STATE_D3;
|
|
}
|
|
|
|
/*
|
|
* If we were unsure about the device parent's power state up to this
|
|
* point, the fact that the device is in D0 implies that the parent has
|
|
* to be in D0 too.
|
|
*/
|
|
if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN
|
|
&& result == ACPI_STATE_D0)
|
|
device->parent->power.state = ACPI_STATE_D0;
|
|
|
|
*state = result;
|
|
|
|
out:
|
|
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is %s\n",
|
|
device->pnp.bus_id, acpi_power_state_string(*state)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* acpi_device_set_power - Set power state of an ACPI device.
|
|
* @device: Device to set the power state of.
|
|
* @state: New power state to set.
|
|
*
|
|
* Callers must ensure that the device is power manageable before using this
|
|
* function.
|
|
*/
|
|
int acpi_device_set_power(struct acpi_device *device, int state)
|
|
{
|
|
int result = 0;
|
|
acpi_status status = AE_OK;
|
|
char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' };
|
|
bool cut_power = false;
|
|
|
|
if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
|
|
return -EINVAL;
|
|
|
|
/* Make sure this is a valid target state */
|
|
|
|
if (state == device->power.state) {
|
|
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at %s\n",
|
|
acpi_power_state_string(state)));
|
|
return 0;
|
|
}
|
|
|
|
if (!device->power.states[state].flags.valid) {
|
|
printk(KERN_WARNING PREFIX "Device does not support %s\n",
|
|
acpi_power_state_string(state));
|
|
return -ENODEV;
|
|
}
|
|
if (device->parent && (state < device->parent->power.state)) {
|
|
printk(KERN_WARNING PREFIX
|
|
"Cannot set device to a higher-powered"
|
|
" state than parent\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* For D3cold we should first transition into D3hot. */
|
|
if (state == ACPI_STATE_D3_COLD
|
|
&& device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible) {
|
|
state = ACPI_STATE_D3_HOT;
|
|
object_name[3] = '3';
|
|
cut_power = true;
|
|
}
|
|
|
|
/*
|
|
* Transition Power
|
|
* ----------------
|
|
* On transitions to a high-powered state we first apply power (via
|
|
* power resources) then evalute _PSx. Conversly for transitions to
|
|
* a lower-powered state.
|
|
*/
|
|
if (state < device->power.state) {
|
|
if (device->power.state >= ACPI_STATE_D3_HOT &&
|
|
state != ACPI_STATE_D0) {
|
|
printk(KERN_WARNING PREFIX
|
|
"Cannot transition to non-D0 state from D3\n");
|
|
return -ENODEV;
|
|
}
|
|
if (device->power.flags.power_resources) {
|
|
result = acpi_power_transition(device, state);
|
|
if (result)
|
|
goto end;
|
|
}
|
|
if (device->power.states[state].flags.explicit_set) {
|
|
status = acpi_evaluate_object(device->handle,
|
|
object_name, NULL, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
result = -ENODEV;
|
|
goto end;
|
|
}
|
|
}
|
|
} else {
|
|
if (device->power.states[state].flags.explicit_set) {
|
|
status = acpi_evaluate_object(device->handle,
|
|
object_name, NULL, NULL);
|
|
if (ACPI_FAILURE(status)) {
|
|
result = -ENODEV;
|
|
goto end;
|
|
}
|
|
}
|
|
if (device->power.flags.power_resources) {
|
|
result = acpi_power_transition(device, state);
|
|
if (result)
|
|
goto end;
|
|
}
|
|
}
|
|
|
|
if (cut_power)
|
|
result = acpi_power_transition(device, ACPI_STATE_D3_COLD);
|
|
|
|
end:
|
|
if (result)
|
|
printk(KERN_WARNING PREFIX
|
|
"Device [%s] failed to transition to %s\n",
|
|
device->pnp.bus_id,
|
|
acpi_power_state_string(state));
|
|
else {
|
|
device->power.state = state;
|
|
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
|
|
"Device [%s] transitioned to %s\n",
|
|
device->pnp.bus_id,
|
|
acpi_power_state_string(state)));
|
|
}
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL(acpi_device_set_power);
|
|
|
|
int acpi_bus_set_power(acpi_handle handle, int state)
|
|
{
|
|
struct acpi_device *device;
|
|
int result;
|
|
|
|
result = acpi_bus_get_device(handle, &device);
|
|
if (result)
|
|
return result;
|
|
|
|
if (!device->flags.power_manageable) {
|
|
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
|
|
"Device [%s] is not power manageable\n",
|
|
dev_name(&device->dev)));
|
|
return -ENODEV;
|
|
}
|
|
|
|
return acpi_device_set_power(device, state);
|
|
}
|
|
EXPORT_SYMBOL(acpi_bus_set_power);
|
|
|
|
int acpi_bus_init_power(struct acpi_device *device)
|
|
{
|
|
int state;
|
|
int result;
|
|
|
|
if (!device)
|
|
return -EINVAL;
|
|
|
|
device->power.state = ACPI_STATE_UNKNOWN;
|
|
|
|
result = acpi_device_get_power(device, &state);
|
|
if (result)
|
|
return result;
|
|
|
|
if (state < ACPI_STATE_D3_COLD && device->power.flags.power_resources) {
|
|
result = acpi_power_on_resources(device, state);
|
|
if (result)
|
|
return result;
|
|
|
|
if (device->power.states[state].flags.explicit_set) {
|
|
char method[5] = { '_', 'P', 'S', '0' + state, '\0' };
|
|
acpi_status status;
|
|
|
|
status = acpi_evaluate_object(device->handle, method,
|
|
NULL, NULL);
|
|
if (ACPI_FAILURE(status))
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
device->power.state = state;
|
|
return 0;
|
|
}
|
|
|
|
int acpi_bus_update_power(acpi_handle handle, int *state_p)
|
|
{
|
|
struct acpi_device *device;
|
|
int state;
|
|
int result;
|
|
|
|
result = acpi_bus_get_device(handle, &device);
|
|
if (result)
|
|
return result;
|
|
|
|
result = acpi_device_get_power(device, &state);
|
|
if (result)
|
|
return result;
|
|
|
|
result = acpi_device_set_power(device, state);
|
|
if (!result && state_p)
|
|
*state_p = state;
|
|
|
|
return result;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_bus_update_power);
|
|
|
|
bool acpi_bus_power_manageable(acpi_handle handle)
|
|
{
|
|
struct acpi_device *device;
|
|
int result;
|
|
|
|
result = acpi_bus_get_device(handle, &device);
|
|
return result ? false : device->flags.power_manageable;
|
|
}
|
|
EXPORT_SYMBOL(acpi_bus_power_manageable);
|
|
|
|
bool acpi_bus_can_wakeup(acpi_handle handle)
|
|
{
|
|
struct acpi_device *device;
|
|
int result;
|
|
|
|
result = acpi_bus_get_device(handle, &device);
|
|
return result ? false : device->wakeup.flags.valid;
|
|
}
|
|
EXPORT_SYMBOL(acpi_bus_can_wakeup);
|
|
|
|
/**
|
|
* acpi_device_power_state - Get preferred power state of ACPI device.
|
|
* @dev: Device whose preferred target power state to return.
|
|
* @adev: ACPI device node corresponding to @dev.
|
|
* @target_state: System state to match the resultant device state.
|
|
* @d_max_in: Deepest low-power state to take into consideration.
|
|
* @d_min_p: Location to store the upper limit of the allowed states range.
|
|
* Return value: Preferred power state of the device on success, -ENODEV
|
|
* (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
|
|
*
|
|
* Find the lowest power (highest number) ACPI device power state that the
|
|
* device can be in while the system is in the state represented by
|
|
* @target_state. If @d_min_p is set, the highest power (lowest number) device
|
|
* power state that @dev can be in for the given system sleep state is stored
|
|
* at the location pointed to by it.
|
|
*
|
|
* Callers must ensure that @dev and @adev are valid pointers and that @adev
|
|
* actually corresponds to @dev before using this function.
|
|
*/
|
|
int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
|
|
u32 target_state, int d_max_in, int *d_min_p)
|
|
{
|
|
char acpi_method[] = "_SxD";
|
|
unsigned long long d_min, d_max;
|
|
bool wakeup = false;
|
|
|
|
if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
|
|
return -EINVAL;
|
|
|
|
if (d_max_in > ACPI_STATE_D3_HOT) {
|
|
enum pm_qos_flags_status stat;
|
|
|
|
stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
|
|
if (stat == PM_QOS_FLAGS_ALL)
|
|
d_max_in = ACPI_STATE_D3_HOT;
|
|
}
|
|
|
|
acpi_method[2] = '0' + target_state;
|
|
/*
|
|
* If the sleep state is S0, the lowest limit from ACPI is D3,
|
|
* but if the device has _S0W, we will use the value from _S0W
|
|
* as the lowest limit from ACPI. Finally, we will constrain
|
|
* the lowest limit with the specified one.
|
|
*/
|
|
d_min = ACPI_STATE_D0;
|
|
d_max = ACPI_STATE_D3;
|
|
|
|
/*
|
|
* If present, _SxD methods return the minimum D-state (highest power
|
|
* state) we can use for the corresponding S-states. Otherwise, the
|
|
* minimum D-state is D0 (ACPI 3.x).
|
|
*
|
|
* NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
|
|
* provided -- that's our fault recovery, we ignore retval.
|
|
*/
|
|
if (target_state > ACPI_STATE_S0) {
|
|
acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min);
|
|
wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
|
|
&& adev->wakeup.sleep_state >= target_state;
|
|
} else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
|
|
PM_QOS_FLAGS_NONE) {
|
|
wakeup = adev->wakeup.flags.valid;
|
|
}
|
|
|
|
/*
|
|
* If _PRW says we can wake up the system from the target sleep state,
|
|
* the D-state returned by _SxD is sufficient for that (we assume a
|
|
* wakeup-aware driver if wake is set). Still, if _SxW exists
|
|
* (ACPI 3.x), it should return the maximum (lowest power) D-state that
|
|
* can wake the system. _S0W may be valid, too.
|
|
*/
|
|
if (wakeup) {
|
|
acpi_status status;
|
|
|
|
acpi_method[3] = 'W';
|
|
status = acpi_evaluate_integer(adev->handle, acpi_method, NULL,
|
|
&d_max);
|
|
if (ACPI_FAILURE(status)) {
|
|
if (target_state != ACPI_STATE_S0 ||
|
|
status != AE_NOT_FOUND)
|
|
d_max = d_min;
|
|
} else if (d_max < d_min) {
|
|
/* Warn the user of the broken DSDT */
|
|
printk(KERN_WARNING "ACPI: Wrong value from %s\n",
|
|
acpi_method);
|
|
/* Sanitize it */
|
|
d_min = d_max;
|
|
}
|
|
}
|
|
|
|
if (d_max_in < d_min)
|
|
return -EINVAL;
|
|
if (d_min_p)
|
|
*d_min_p = d_min;
|
|
/* constrain d_max with specified lowest limit (max number) */
|
|
if (d_max > d_max_in) {
|
|
for (d_max = d_max_in; d_max > d_min; d_max--) {
|
|
if (adev->power.states[d_max].flags.valid)
|
|
break;
|
|
}
|
|
}
|
|
return d_max;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_device_power_state);
|
|
|
|
/**
|
|
* acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
|
|
* @dev: Device whose preferred target power state to return.
|
|
* @d_min_p: Location to store the upper limit of the allowed states range.
|
|
* @d_max_in: Deepest low-power state to take into consideration.
|
|
* Return value: Preferred power state of the device on success, -ENODEV
|
|
* (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
|
|
*
|
|
* The caller must ensure that @dev is valid before using this function.
|
|
*/
|
|
int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
|
|
{
|
|
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
|
|
struct acpi_device *adev;
|
|
|
|
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
|
|
dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return acpi_device_power_state(dev, adev, acpi_target_system_state(),
|
|
d_max_in, d_min_p);
|
|
}
|
|
EXPORT_SYMBOL(acpi_pm_device_sleep_state);
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
/**
|
|
* acpi_wakeup_device - Wakeup notification handler for ACPI devices.
|
|
* @handle: ACPI handle of the device the notification is for.
|
|
* @event: Type of the signaled event.
|
|
* @context: Device corresponding to @handle.
|
|
*/
|
|
static void acpi_wakeup_device(acpi_handle handle, u32 event, void *context)
|
|
{
|
|
struct device *dev = context;
|
|
|
|
if (event == ACPI_NOTIFY_DEVICE_WAKE && dev) {
|
|
pm_wakeup_event(dev, 0);
|
|
pm_runtime_resume(dev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* __acpi_device_run_wake - Enable/disable runtime remote wakeup for device.
|
|
* @adev: ACPI device to enable/disable the remote wakeup for.
|
|
* @enable: Whether to enable or disable the wakeup functionality.
|
|
*
|
|
* Enable/disable the GPE associated with @adev so that it can generate
|
|
* wakeup signals for the device in response to external (remote) events and
|
|
* enable/disable device wakeup power.
|
|
*
|
|
* Callers must ensure that @adev is a valid ACPI device node before executing
|
|
* this function.
|
|
*/
|
|
int __acpi_device_run_wake(struct acpi_device *adev, bool enable)
|
|
{
|
|
struct acpi_device_wakeup *wakeup = &adev->wakeup;
|
|
|
|
if (enable) {
|
|
acpi_status res;
|
|
int error;
|
|
|
|
error = acpi_enable_wakeup_device_power(adev, ACPI_STATE_S0);
|
|
if (error)
|
|
return error;
|
|
|
|
res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
|
|
if (ACPI_FAILURE(res)) {
|
|
acpi_disable_wakeup_device_power(adev);
|
|
return -EIO;
|
|
}
|
|
} else {
|
|
acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
|
|
acpi_disable_wakeup_device_power(adev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
|
|
* @dev: Device to enable/disable the platform to wake up.
|
|
* @enable: Whether to enable or disable the wakeup functionality.
|
|
*/
|
|
int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
|
|
{
|
|
struct acpi_device *adev;
|
|
acpi_handle handle;
|
|
|
|
if (!device_run_wake(phys_dev))
|
|
return -EINVAL;
|
|
|
|
handle = DEVICE_ACPI_HANDLE(phys_dev);
|
|
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
|
|
dev_dbg(phys_dev, "ACPI handle without context in %s!\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return __acpi_device_run_wake(adev, enable);
|
|
}
|
|
EXPORT_SYMBOL(acpi_pm_device_run_wake);
|
|
#else
|
|
static inline void acpi_wakeup_device(acpi_handle handle, u32 event,
|
|
void *context) {}
|
|
#endif /* CONFIG_PM_RUNTIME */
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/**
|
|
* __acpi_device_sleep_wake - Enable or disable device to wake up the system.
|
|
* @dev: Device to enable/desible to wake up the system.
|
|
* @target_state: System state the device is supposed to wake up from.
|
|
* @enable: Whether to enable or disable @dev to wake up the system.
|
|
*/
|
|
int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state,
|
|
bool enable)
|
|
{
|
|
return enable ?
|
|
acpi_enable_wakeup_device_power(adev, target_state) :
|
|
acpi_disable_wakeup_device_power(adev);
|
|
}
|
|
|
|
/**
|
|
* acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
|
|
* @dev: Device to enable/desible to wake up the system from sleep states.
|
|
* @enable: Whether to enable or disable @dev to wake up the system.
|
|
*/
|
|
int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
|
|
{
|
|
acpi_handle handle;
|
|
struct acpi_device *adev;
|
|
int error;
|
|
|
|
if (!device_can_wakeup(dev))
|
|
return -EINVAL;
|
|
|
|
handle = DEVICE_ACPI_HANDLE(dev);
|
|
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
|
|
dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
error = __acpi_device_sleep_wake(adev, acpi_target_system_state(),
|
|
enable);
|
|
if (!error)
|
|
dev_info(dev, "System wakeup %s by ACPI\n",
|
|
enable ? "enabled" : "disabled");
|
|
|
|
return error;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
/**
|
|
* acpi_dev_pm_get_node - Get ACPI device node for the given physical device.
|
|
* @dev: Device to get the ACPI node for.
|
|
*/
|
|
struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
|
|
{
|
|
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
|
|
struct acpi_device *adev;
|
|
|
|
return handle && !acpi_bus_get_device(handle, &adev) ? adev : NULL;
|
|
}
|
|
|
|
/**
|
|
* acpi_dev_pm_low_power - Put ACPI device into a low-power state.
|
|
* @dev: Device to put into a low-power state.
|
|
* @adev: ACPI device node corresponding to @dev.
|
|
* @system_state: System state to choose the device state for.
|
|
*/
|
|
static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev,
|
|
u32 system_state)
|
|
{
|
|
int power_state;
|
|
|
|
if (!acpi_device_power_manageable(adev))
|
|
return 0;
|
|
|
|
power_state = acpi_device_power_state(dev, adev, system_state,
|
|
ACPI_STATE_D3, NULL);
|
|
if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3)
|
|
return -EIO;
|
|
|
|
return acpi_device_set_power(adev, power_state);
|
|
}
|
|
|
|
/**
|
|
* acpi_dev_pm_full_power - Put ACPI device into the full-power state.
|
|
* @adev: ACPI device node to put into the full-power state.
|
|
*/
|
|
static int acpi_dev_pm_full_power(struct acpi_device *adev)
|
|
{
|
|
return acpi_device_power_manageable(adev) ?
|
|
acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
/**
|
|
* acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
|
|
* @dev: Device to put into a low-power state.
|
|
*
|
|
* Put the given device into a runtime low-power state using the standard ACPI
|
|
* mechanism. Set up remote wakeup if desired, choose the state to put the
|
|
* device into (this checks if remote wakeup is expected to work too), and set
|
|
* the power state of the device.
|
|
*/
|
|
int acpi_dev_runtime_suspend(struct device *dev)
|
|
{
|
|
struct acpi_device *adev = acpi_dev_pm_get_node(dev);
|
|
bool remote_wakeup;
|
|
int error;
|
|
|
|
if (!adev)
|
|
return 0;
|
|
|
|
remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
|
|
PM_QOS_FLAGS_NONE;
|
|
error = __acpi_device_run_wake(adev, remote_wakeup);
|
|
if (remote_wakeup && error)
|
|
return -EAGAIN;
|
|
|
|
error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
|
|
if (error)
|
|
__acpi_device_run_wake(adev, false);
|
|
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend);
|
|
|
|
/**
|
|
* acpi_dev_runtime_resume - Put device into the full-power state using ACPI.
|
|
* @dev: Device to put into the full-power state.
|
|
*
|
|
* Put the given device into the full-power state using the standard ACPI
|
|
* mechanism at run time. Set the power state of the device to ACPI D0 and
|
|
* disable remote wakeup.
|
|
*/
|
|
int acpi_dev_runtime_resume(struct device *dev)
|
|
{
|
|
struct acpi_device *adev = acpi_dev_pm_get_node(dev);
|
|
int error;
|
|
|
|
if (!adev)
|
|
return 0;
|
|
|
|
error = acpi_dev_pm_full_power(adev);
|
|
__acpi_device_run_wake(adev, false);
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume);
|
|
|
|
/**
|
|
* acpi_subsys_runtime_suspend - Suspend device using ACPI.
|
|
* @dev: Device to suspend.
|
|
*
|
|
* Carry out the generic runtime suspend procedure for @dev and use ACPI to put
|
|
* it into a runtime low-power state.
|
|
*/
|
|
int acpi_subsys_runtime_suspend(struct device *dev)
|
|
{
|
|
int ret = pm_generic_runtime_suspend(dev);
|
|
return ret ? ret : acpi_dev_runtime_suspend(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend);
|
|
|
|
/**
|
|
* acpi_subsys_runtime_resume - Resume device using ACPI.
|
|
* @dev: Device to Resume.
|
|
*
|
|
* Use ACPI to put the given device into the full-power state and carry out the
|
|
* generic runtime resume procedure for it.
|
|
*/
|
|
int acpi_subsys_runtime_resume(struct device *dev)
|
|
{
|
|
int ret = acpi_dev_runtime_resume(dev);
|
|
return ret ? ret : pm_generic_runtime_resume(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
|
|
#endif /* CONFIG_PM_RUNTIME */
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/**
|
|
* acpi_dev_suspend_late - Put device into a low-power state using ACPI.
|
|
* @dev: Device to put into a low-power state.
|
|
*
|
|
* Put the given device into a low-power state during system transition to a
|
|
* sleep state using the standard ACPI mechanism. Set up system wakeup if
|
|
* desired, choose the state to put the device into (this checks if system
|
|
* wakeup is expected to work too), and set the power state of the device.
|
|
*/
|
|
int acpi_dev_suspend_late(struct device *dev)
|
|
{
|
|
struct acpi_device *adev = acpi_dev_pm_get_node(dev);
|
|
u32 target_state;
|
|
bool wakeup;
|
|
int error;
|
|
|
|
if (!adev)
|
|
return 0;
|
|
|
|
target_state = acpi_target_system_state();
|
|
wakeup = device_may_wakeup(dev);
|
|
error = __acpi_device_sleep_wake(adev, target_state, wakeup);
|
|
if (wakeup && error)
|
|
return error;
|
|
|
|
error = acpi_dev_pm_low_power(dev, adev, target_state);
|
|
if (error)
|
|
__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
|
|
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_suspend_late);
|
|
|
|
/**
|
|
* acpi_dev_resume_early - Put device into the full-power state using ACPI.
|
|
* @dev: Device to put into the full-power state.
|
|
*
|
|
* Put the given device into the full-power state using the standard ACPI
|
|
* mechanism during system transition to the working state. Set the power
|
|
* state of the device to ACPI D0 and disable remote wakeup.
|
|
*/
|
|
int acpi_dev_resume_early(struct device *dev)
|
|
{
|
|
struct acpi_device *adev = acpi_dev_pm_get_node(dev);
|
|
int error;
|
|
|
|
if (!adev)
|
|
return 0;
|
|
|
|
error = acpi_dev_pm_full_power(adev);
|
|
__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
|
|
return error;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_resume_early);
|
|
|
|
/**
|
|
* acpi_subsys_prepare - Prepare device for system transition to a sleep state.
|
|
* @dev: Device to prepare.
|
|
*/
|
|
int acpi_subsys_prepare(struct device *dev)
|
|
{
|
|
/*
|
|
* Follow PCI and resume devices suspended at run time before running
|
|
* their system suspend callbacks.
|
|
*/
|
|
pm_runtime_resume(dev);
|
|
return pm_generic_prepare(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
|
|
|
|
/**
|
|
* acpi_subsys_suspend_late - Suspend device using ACPI.
|
|
* @dev: Device to suspend.
|
|
*
|
|
* Carry out the generic late suspend procedure for @dev and use ACPI to put
|
|
* it into a low-power state during system transition into a sleep state.
|
|
*/
|
|
int acpi_subsys_suspend_late(struct device *dev)
|
|
{
|
|
int ret = pm_generic_suspend_late(dev);
|
|
return ret ? ret : acpi_dev_suspend_late(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
|
|
|
|
/**
|
|
* acpi_subsys_resume_early - Resume device using ACPI.
|
|
* @dev: Device to Resume.
|
|
*
|
|
* Use ACPI to put the given device into the full-power state and carry out the
|
|
* generic early resume procedure for it during system transition into the
|
|
* working state.
|
|
*/
|
|
int acpi_subsys_resume_early(struct device *dev)
|
|
{
|
|
int ret = acpi_dev_resume_early(dev);
|
|
return ret ? ret : pm_generic_resume_early(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static struct dev_pm_domain acpi_general_pm_domain = {
|
|
.ops = {
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
.runtime_suspend = acpi_subsys_runtime_suspend,
|
|
.runtime_resume = acpi_subsys_runtime_resume,
|
|
.runtime_idle = pm_generic_runtime_idle,
|
|
#endif
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.prepare = acpi_subsys_prepare,
|
|
.suspend_late = acpi_subsys_suspend_late,
|
|
.resume_early = acpi_subsys_resume_early,
|
|
.poweroff_late = acpi_subsys_suspend_late,
|
|
.restore_early = acpi_subsys_resume_early,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
/**
|
|
* acpi_dev_pm_attach - Prepare device for ACPI power management.
|
|
* @dev: Device to prepare.
|
|
* @power_on: Whether or not to power on the device.
|
|
*
|
|
* If @dev has a valid ACPI handle that has a valid struct acpi_device object
|
|
* attached to it, install a wakeup notification handler for the device and
|
|
* add it to the general ACPI PM domain. If @power_on is set, the device will
|
|
* be put into the ACPI D0 state before the function returns.
|
|
*
|
|
* This assumes that the @dev's bus type uses generic power management callbacks
|
|
* (or doesn't use any power management callbacks at all).
|
|
*
|
|
* Callers must ensure proper synchronization of this function with power
|
|
* management callbacks.
|
|
*/
|
|
int acpi_dev_pm_attach(struct device *dev, bool power_on)
|
|
{
|
|
struct acpi_device *adev = acpi_dev_pm_get_node(dev);
|
|
|
|
if (!adev)
|
|
return -ENODEV;
|
|
|
|
if (dev->pm_domain)
|
|
return -EEXIST;
|
|
|
|
acpi_add_pm_notifier(adev, acpi_wakeup_device, dev);
|
|
dev->pm_domain = &acpi_general_pm_domain;
|
|
if (power_on) {
|
|
acpi_dev_pm_full_power(adev);
|
|
__acpi_device_run_wake(adev, false);
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
|
|
|
|
/**
|
|
* acpi_dev_pm_detach - Remove ACPI power management from the device.
|
|
* @dev: Device to take care of.
|
|
* @power_off: Whether or not to try to remove power from the device.
|
|
*
|
|
* Remove the device from the general ACPI PM domain and remove its wakeup
|
|
* notifier. If @power_off is set, additionally remove power from the device if
|
|
* possible.
|
|
*
|
|
* Callers must ensure proper synchronization of this function with power
|
|
* management callbacks.
|
|
*/
|
|
void acpi_dev_pm_detach(struct device *dev, bool power_off)
|
|
{
|
|
struct acpi_device *adev = acpi_dev_pm_get_node(dev);
|
|
|
|
if (adev && dev->pm_domain == &acpi_general_pm_domain) {
|
|
dev->pm_domain = NULL;
|
|
acpi_remove_pm_notifier(adev, acpi_wakeup_device);
|
|
if (power_off) {
|
|
/*
|
|
* If the device's PM QoS resume latency limit or flags
|
|
* have been exposed to user space, they have to be
|
|
* hidden at this point, so that they don't affect the
|
|
* choice of the low-power state to put the device into.
|
|
*/
|
|
dev_pm_qos_hide_latency_limit(dev);
|
|
dev_pm_qos_hide_flags(dev);
|
|
__acpi_device_run_wake(adev, false);
|
|
acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
|
|
}
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);
|
|
|
|
/**
|
|
* acpi_dev_pm_add_dependent - Add physical device depending for PM.
|
|
* @handle: Handle of ACPI device node.
|
|
* @depdev: Device depending on that node for PM.
|
|
*/
|
|
void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev)
|
|
{
|
|
struct acpi_device_physical_node *dep;
|
|
struct acpi_device *adev;
|
|
|
|
if (!depdev || acpi_bus_get_device(handle, &adev))
|
|
return;
|
|
|
|
mutex_lock(&adev->physical_node_lock);
|
|
|
|
list_for_each_entry(dep, &adev->power_dependent, node)
|
|
if (dep->dev == depdev)
|
|
goto out;
|
|
|
|
dep = kzalloc(sizeof(*dep), GFP_KERNEL);
|
|
if (dep) {
|
|
dep->dev = depdev;
|
|
list_add_tail(&dep->node, &adev->power_dependent);
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&adev->physical_node_lock);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_pm_add_dependent);
|
|
|
|
/**
|
|
* acpi_dev_pm_remove_dependent - Remove physical device depending for PM.
|
|
* @handle: Handle of ACPI device node.
|
|
* @depdev: Device depending on that node for PM.
|
|
*/
|
|
void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev)
|
|
{
|
|
struct acpi_device_physical_node *dep;
|
|
struct acpi_device *adev;
|
|
|
|
if (!depdev || acpi_bus_get_device(handle, &adev))
|
|
return;
|
|
|
|
mutex_lock(&adev->physical_node_lock);
|
|
|
|
list_for_each_entry(dep, &adev->power_dependent, node)
|
|
if (dep->dev == depdev) {
|
|
list_del(&dep->node);
|
|
kfree(dep);
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&adev->physical_node_lock);
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent);
|