remarkable-linux/drivers/usb/gadget/dbgp.c
Sebastian Andrzej Siewior 19b10a8828 usb: gadget: allocate & giveback serial ports instead hard code them
This patch removes gserial_setup() and gserial_cleanup() and adds
gserial_alloc_line() and gserial_free_line() to replace them.

The initial setup of u_serial happens now on module load time. A
maximum of four TTY ports can be requested which is the current limit.
In theory we could extend this limit, the hard limit is the number of
available endpoints.
alloc_tty_driver() is now called at module init time with the max
available ports. The per-line footprint here is on 32bit is 3 * size of
pointer + 60 bytes (for cdevs).
The remaining memory (struct gs_port) is allocated once a port is
requested.

With this change it is possible to load g_multi and g_serial at the same
time. GS0 receives the module that is loaded first, GS1 is received by
the next module and so on. With the configfs interface the port number
can be exported and the device node is more predictable. Nothing changes
for g_serial and friends as long as one module is used.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-21 20:52:43 +02:00

435 lines
8.4 KiB
C

/*
* dbgp.c -- EHCI Debug Port device gadget
*
* Copyright (C) 2010 Stephane Duverger
*
* Released under the GPLv2.
*/
/* verbose messages */
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include "u_serial.h"
#define DRIVER_VENDOR_ID 0x0525 /* NetChip */
#define DRIVER_PRODUCT_ID 0xc0de /* undefined */
#define USB_DEBUG_MAX_PACKET_SIZE 8
#define DBGP_REQ_EP0_LEN 128
#define DBGP_REQ_LEN 512
static struct dbgp {
struct usb_gadget *gadget;
struct usb_request *req;
struct usb_ep *i_ep;
struct usb_ep *o_ep;
#ifdef CONFIG_USB_G_DBGP_SERIAL
struct gserial *serial;
#endif
} dbgp;
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = __constant_cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_VENDOR_SPEC,
.idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID),
.idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID),
.bNumConfigurations = 1,
};
static struct usb_debug_descriptor dbg_desc = {
.bLength = sizeof dbg_desc,
.bDescriptorType = USB_DT_DEBUG,
};
static struct usb_endpoint_descriptor i_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.bEndpointAddress = USB_DIR_IN,
};
static struct usb_endpoint_descriptor o_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.bEndpointAddress = USB_DIR_OUT,
};
#ifdef CONFIG_USB_G_DBGP_PRINTK
static int dbgp_consume(char *buf, unsigned len)
{
char c;
if (!len)
return 0;
c = buf[len-1];
if (c != 0)
buf[len-1] = 0;
printk(KERN_NOTICE "%s%c", buf, c);
return 0;
}
static void __disable_ep(struct usb_ep *ep)
{
if (ep && ep->driver_data == dbgp.gadget) {
usb_ep_disable(ep);
ep->driver_data = NULL;
}
}
static void dbgp_disable_ep(void)
{
__disable_ep(dbgp.i_ep);
__disable_ep(dbgp.o_ep);
}
static void dbgp_complete(struct usb_ep *ep, struct usb_request *req)
{
int stp;
int err = 0;
int status = req->status;
if (ep == dbgp.i_ep) {
stp = 1;
goto fail;
}
if (status != 0) {
stp = 2;
goto release_req;
}
dbgp_consume(req->buf, req->actual);
req->length = DBGP_REQ_LEN;
err = usb_ep_queue(ep, req, GFP_ATOMIC);
if (err < 0) {
stp = 3;
goto release_req;
}
return;
release_req:
kfree(req->buf);
usb_ep_free_request(dbgp.o_ep, req);
dbgp_disable_ep();
fail:
dev_dbg(&dbgp.gadget->dev,
"complete: failure (%d:%d) ==> %d\n", stp, err, status);
}
static int dbgp_enable_ep_req(struct usb_ep *ep)
{
int err, stp;
struct usb_request *req;
req = usb_ep_alloc_request(ep, GFP_KERNEL);
if (!req) {
err = -ENOMEM;
stp = 1;
goto fail_1;
}
req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL);
if (!req->buf) {
err = -ENOMEM;
stp = 2;
goto fail_2;
}
req->complete = dbgp_complete;
req->length = DBGP_REQ_LEN;
err = usb_ep_queue(ep, req, GFP_ATOMIC);
if (err < 0) {
stp = 3;
goto fail_3;
}
return 0;
fail_3:
kfree(req->buf);
fail_2:
usb_ep_free_request(dbgp.o_ep, req);
fail_1:
dev_dbg(&dbgp.gadget->dev,
"enable ep req: failure (%d:%d)\n", stp, err);
return err;
}
static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc)
{
int err;
ep->desc = desc;
err = usb_ep_enable(ep);
ep->driver_data = dbgp.gadget;
return err;
}
static int dbgp_enable_ep(void)
{
int err, stp;
err = __enable_ep(dbgp.i_ep, &i_desc);
if (err < 0) {
stp = 1;
goto fail_1;
}
err = __enable_ep(dbgp.o_ep, &o_desc);
if (err < 0) {
stp = 2;
goto fail_2;
}
err = dbgp_enable_ep_req(dbgp.o_ep);
if (err < 0) {
stp = 3;
goto fail_3;
}
return 0;
fail_3:
__disable_ep(dbgp.o_ep);
fail_2:
__disable_ep(dbgp.i_ep);
fail_1:
dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err);
return err;
}
#endif
static void dbgp_disconnect(struct usb_gadget *gadget)
{
#ifdef CONFIG_USB_G_DBGP_PRINTK
dbgp_disable_ep();
#else
gserial_disconnect(dbgp.serial);
#endif
}
static void dbgp_unbind(struct usb_gadget *gadget)
{
#ifdef CONFIG_USB_G_DBGP_SERIAL
kfree(dbgp.serial);
#endif
if (dbgp.req) {
kfree(dbgp.req->buf);
usb_ep_free_request(gadget->ep0, dbgp.req);
}
gadget->ep0->driver_data = NULL;
}
#ifdef CONFIG_USB_G_DBGP_SERIAL
static unsigned char tty_line;
#endif
static int __init dbgp_configure_endpoints(struct usb_gadget *gadget)
{
int stp;
usb_ep_autoconfig_reset(gadget);
dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc);
if (!dbgp.i_ep) {
stp = 1;
goto fail_1;
}
dbgp.i_ep->driver_data = gadget;
i_desc.wMaxPacketSize =
__constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc);
if (!dbgp.o_ep) {
dbgp.i_ep->driver_data = NULL;
stp = 2;
goto fail_2;
}
dbgp.o_ep->driver_data = gadget;
o_desc.wMaxPacketSize =
__constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE);
dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress;
dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress;
#ifdef CONFIG_USB_G_DBGP_SERIAL
dbgp.serial->in = dbgp.i_ep;
dbgp.serial->out = dbgp.o_ep;
dbgp.serial->in->desc = &i_desc;
dbgp.serial->out->desc = &o_desc;
if (gserial_alloc_line(&tty_line)) {
stp = 3;
goto fail_3;
}
return 0;
fail_3:
dbgp.o_ep->driver_data = NULL;
#else
return 0;
#endif
fail_2:
dbgp.i_ep->driver_data = NULL;
fail_1:
dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp);
return -ENODEV;
}
static int __init dbgp_bind(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
int err, stp;
dbgp.gadget = gadget;
dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
if (!dbgp.req) {
err = -ENOMEM;
stp = 1;
goto fail;
}
dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL);
if (!dbgp.req->buf) {
err = -ENOMEM;
stp = 2;
goto fail;
}
dbgp.req->length = DBGP_REQ_EP0_LEN;
gadget->ep0->driver_data = gadget;
#ifdef CONFIG_USB_G_DBGP_SERIAL
dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL);
if (!dbgp.serial) {
stp = 3;
err = -ENOMEM;
goto fail;
}
#endif
err = dbgp_configure_endpoints(gadget);
if (err < 0) {
stp = 4;
goto fail;
}
dev_dbg(&dbgp.gadget->dev, "bind: success\n");
return 0;
fail:
dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err);
dbgp_unbind(gadget);
return err;
}
static void dbgp_setup_complete(struct usb_ep *ep,
struct usb_request *req)
{
dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n",
req->status, req->actual, req->length);
}
static int dbgp_setup(struct usb_gadget *gadget,
const struct usb_ctrlrequest *ctrl)
{
struct usb_request *req = dbgp.req;
u8 request = ctrl->bRequest;
u16 value = le16_to_cpu(ctrl->wValue);
u16 length = le16_to_cpu(ctrl->wLength);
int err = -EOPNOTSUPP;
void *data = NULL;
u16 len = 0;
gadget->ep0->driver_data = gadget;
if (request == USB_REQ_GET_DESCRIPTOR) {
switch (value>>8) {
case USB_DT_DEVICE:
dev_dbg(&dbgp.gadget->dev, "setup: desc device\n");
len = sizeof device_desc;
data = &device_desc;
device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
break;
case USB_DT_DEBUG:
dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n");
len = sizeof dbg_desc;
data = &dbg_desc;
break;
default:
goto fail;
}
err = 0;
} else if (request == USB_REQ_SET_FEATURE &&
value == USB_DEVICE_DEBUG_MODE) {
dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n");
#ifdef CONFIG_USB_G_DBGP_PRINTK
err = dbgp_enable_ep();
#else
err = gserial_connect(dbgp.serial, tty_line);
#endif
if (err < 0)
goto fail;
} else
goto fail;
req->length = min(length, len);
req->zero = len < req->length;
if (data && req->length)
memcpy(req->buf, data, req->length);
req->complete = dbgp_setup_complete;
return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
fail:
dev_dbg(&dbgp.gadget->dev,
"setup: failure req %x v %x\n", request, value);
return err;
}
static __refdata struct usb_gadget_driver dbgp_driver = {
.function = "dbgp",
.max_speed = USB_SPEED_HIGH,
.bind = dbgp_bind,
.unbind = dbgp_unbind,
.setup = dbgp_setup,
.disconnect = dbgp_disconnect,
.driver = {
.owner = THIS_MODULE,
.name = "dbgp"
},
};
static int __init dbgp_init(void)
{
return usb_gadget_probe_driver(&dbgp_driver);
}
static void __exit dbgp_exit(void)
{
usb_gadget_unregister_driver(&dbgp_driver);
#ifdef CONFIG_USB_G_DBGP_SERIAL
gserial_free_line(tty_line);
#endif
}
MODULE_AUTHOR("Stephane Duverger");
MODULE_LICENSE("GPL");
module_init(dbgp_init);
module_exit(dbgp_exit);