![Jean Delvare](/assets/img/avatar_default.png)
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
836 lines
26 KiB
C
836 lines
26 KiB
C
/*
|
|
* lm87.c
|
|
*
|
|
* Copyright (C) 2000 Frodo Looijaard <frodol@dds.nl>
|
|
* Philip Edelbrock <phil@netroedge.com>
|
|
* Stephen Rousset <stephen.rousset@rocketlogix.com>
|
|
* Dan Eaton <dan.eaton@rocketlogix.com>
|
|
* Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
|
|
*
|
|
* Original port to Linux 2.6 by Jeff Oliver.
|
|
*
|
|
* The LM87 is a sensor chip made by National Semiconductor. It monitors up
|
|
* to 8 voltages (including its own power source), up to three temperatures
|
|
* (its own plus up to two external ones) and up to two fans. The default
|
|
* configuration is 6 voltages, two temperatures and two fans (see below).
|
|
* Voltages are scaled internally with ratios such that the nominal value of
|
|
* each voltage correspond to a register value of 192 (which means a
|
|
* resolution of about 0.5% of the nominal value). Temperature values are
|
|
* reported with a 1 deg resolution and a 3-4 deg accuracy. Complete
|
|
* datasheet can be obtained from National's website at:
|
|
* http://www.national.com/pf/LM/LM87.html
|
|
*
|
|
* Some functions share pins, so not all functions are available at the same
|
|
* time. Which are depends on the hardware setup. This driver assumes that
|
|
* the BIOS configured the chip correctly. In that respect, it differs from
|
|
* the original driver (from lm_sensors for Linux 2.4), which would force the
|
|
* LM87 to an arbitrary, compile-time chosen mode, regardless of the actual
|
|
* chipset wiring.
|
|
* For reference, here is the list of exclusive functions:
|
|
* - in0+in5 (default) or temp3
|
|
* - fan1 (default) or in6
|
|
* - fan2 (default) or in7
|
|
* - VID lines (default) or IRQ lines (not handled by this driver)
|
|
*
|
|
* The LM87 additionally features an analog output, supposedly usable to
|
|
* control the speed of a fan. All new chips use pulse width modulation
|
|
* instead. The LM87 is the only hardware monitoring chipset I know of
|
|
* which uses amplitude modulation. Be careful when using this feature.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/err.h>
|
|
|
|
/*
|
|
* Addresses to scan
|
|
* LM87 has three possible addresses: 0x2c, 0x2d and 0x2e.
|
|
*/
|
|
|
|
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
|
|
|
|
/*
|
|
* Insmod parameters
|
|
*/
|
|
|
|
I2C_CLIENT_INSMOD_1(lm87);
|
|
|
|
/*
|
|
* The LM87 registers
|
|
*/
|
|
|
|
/* nr in 0..5 */
|
|
#define LM87_REG_IN(nr) (0x20 + (nr))
|
|
#define LM87_REG_IN_MAX(nr) (0x2B + (nr) * 2)
|
|
#define LM87_REG_IN_MIN(nr) (0x2C + (nr) * 2)
|
|
/* nr in 0..1 */
|
|
#define LM87_REG_AIN(nr) (0x28 + (nr))
|
|
#define LM87_REG_AIN_MIN(nr) (0x1A + (nr))
|
|
#define LM87_REG_AIN_MAX(nr) (0x3B + (nr))
|
|
|
|
static u8 LM87_REG_TEMP[3] = { 0x27, 0x26, 0x20 };
|
|
static u8 LM87_REG_TEMP_HIGH[3] = { 0x39, 0x37, 0x2B };
|
|
static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C };
|
|
|
|
#define LM87_REG_TEMP_HW_INT_LOCK 0x13
|
|
#define LM87_REG_TEMP_HW_EXT_LOCK 0x14
|
|
#define LM87_REG_TEMP_HW_INT 0x17
|
|
#define LM87_REG_TEMP_HW_EXT 0x18
|
|
|
|
/* nr in 0..1 */
|
|
#define LM87_REG_FAN(nr) (0x28 + (nr))
|
|
#define LM87_REG_FAN_MIN(nr) (0x3B + (nr))
|
|
#define LM87_REG_AOUT 0x19
|
|
|
|
#define LM87_REG_CONFIG 0x40
|
|
#define LM87_REG_CHANNEL_MODE 0x16
|
|
#define LM87_REG_VID_FAN_DIV 0x47
|
|
#define LM87_REG_VID4 0x49
|
|
|
|
#define LM87_REG_ALARMS1 0x41
|
|
#define LM87_REG_ALARMS2 0x42
|
|
|
|
#define LM87_REG_COMPANY_ID 0x3E
|
|
#define LM87_REG_REVISION 0x3F
|
|
|
|
/*
|
|
* Conversions and various macros
|
|
* The LM87 uses signed 8-bit values for temperatures.
|
|
*/
|
|
|
|
#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192)
|
|
#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \
|
|
(val) * 192 >= (scale) * 255 ? 255 : \
|
|
((val) * 192 + (scale)/2) / (scale))
|
|
|
|
#define TEMP_FROM_REG(reg) ((reg) * 1000)
|
|
#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \
|
|
(val) >= 126500 ? 127 : \
|
|
(((val) < 0 ? (val)-500 : (val)+500) / 1000))
|
|
|
|
#define FAN_FROM_REG(reg,div) ((reg) == 255 || (reg) == 0 ? 0 : \
|
|
1350000 + (reg)*(div) / 2) / ((reg)*(div))
|
|
#define FAN_TO_REG(val,div) ((val)*(div) * 255 <= 1350000 ? 255 : \
|
|
(1350000 + (val)*(div) / 2) / ((val)*(div)))
|
|
|
|
#define FAN_DIV_FROM_REG(reg) (1 << (reg))
|
|
|
|
/* analog out is 9.80mV/LSB */
|
|
#define AOUT_FROM_REG(reg) (((reg) * 98 + 5) / 10)
|
|
#define AOUT_TO_REG(val) ((val) <= 0 ? 0 : \
|
|
(val) >= 2500 ? 255 : \
|
|
((val) * 10 + 49) / 98)
|
|
|
|
/* nr in 0..1 */
|
|
#define CHAN_NO_FAN(nr) (1 << (nr))
|
|
#define CHAN_TEMP3 (1 << 2)
|
|
#define CHAN_VCC_5V (1 << 3)
|
|
#define CHAN_NO_VID (1 << 8)
|
|
|
|
/*
|
|
* Functions declaration
|
|
*/
|
|
|
|
static int lm87_attach_adapter(struct i2c_adapter *adapter);
|
|
static int lm87_detect(struct i2c_adapter *adapter, int address, int kind);
|
|
static void lm87_init_client(struct i2c_client *client);
|
|
static int lm87_detach_client(struct i2c_client *client);
|
|
static struct lm87_data *lm87_update_device(struct device *dev);
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static struct i2c_driver lm87_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "lm87",
|
|
.id = I2C_DRIVERID_LM87,
|
|
.attach_adapter = lm87_attach_adapter,
|
|
.detach_client = lm87_detach_client,
|
|
};
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct lm87_data {
|
|
struct i2c_client client;
|
|
struct class_device *class_dev;
|
|
struct semaphore update_lock;
|
|
char valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
u8 channel; /* register value */
|
|
|
|
u8 in[8]; /* register value */
|
|
u8 in_max[8]; /* register value */
|
|
u8 in_min[8]; /* register value */
|
|
u16 in_scale[8];
|
|
|
|
s8 temp[3]; /* register value */
|
|
s8 temp_high[3]; /* register value */
|
|
s8 temp_low[3]; /* register value */
|
|
s8 temp_crit_int; /* min of two register values */
|
|
s8 temp_crit_ext; /* min of two register values */
|
|
|
|
u8 fan[2]; /* register value */
|
|
u8 fan_min[2]; /* register value */
|
|
u8 fan_div[2]; /* register value, shifted right */
|
|
u8 aout; /* register value */
|
|
|
|
u16 alarms; /* register values, combined */
|
|
u8 vid; /* register values, combined */
|
|
u8 vrm;
|
|
};
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
|
|
static inline int lm87_read_value(struct i2c_client *client, u8 reg)
|
|
{
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
}
|
|
|
|
static inline int lm87_write_value(struct i2c_client *client, u8 reg, u8 value)
|
|
{
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
#define show_in(offset) \
|
|
static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
|
|
data->in_scale[offset])); \
|
|
} \
|
|
static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
|
|
data->in_scale[offset])); \
|
|
} \
|
|
static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
|
|
data->in_scale[offset])); \
|
|
} \
|
|
static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
|
|
show_in##offset##_input, NULL);
|
|
show_in(0);
|
|
show_in(1);
|
|
show_in(2);
|
|
show_in(3);
|
|
show_in(4);
|
|
show_in(5);
|
|
show_in(6);
|
|
show_in(7);
|
|
|
|
static void set_in_min(struct device *dev, const char *buf, int nr)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
down(&data->update_lock);
|
|
data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]);
|
|
lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) :
|
|
LM87_REG_AIN_MIN(nr-6), data->in_min[nr]);
|
|
up(&data->update_lock);
|
|
}
|
|
|
|
static void set_in_max(struct device *dev, const char *buf, int nr)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
down(&data->update_lock);
|
|
data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]);
|
|
lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) :
|
|
LM87_REG_AIN_MAX(nr-6), data->in_max[nr]);
|
|
up(&data->update_lock);
|
|
}
|
|
|
|
#define set_in(offset) \
|
|
static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
set_in_min(dev, buf, offset); \
|
|
return count; \
|
|
} \
|
|
static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
set_in_max(dev, buf, offset); \
|
|
return count; \
|
|
} \
|
|
static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
|
|
show_in##offset##_min, set_in##offset##_min); \
|
|
static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
|
|
show_in##offset##_max, set_in##offset##_max);
|
|
set_in(0);
|
|
set_in(1);
|
|
set_in(2);
|
|
set_in(3);
|
|
set_in(4);
|
|
set_in(5);
|
|
set_in(6);
|
|
set_in(7);
|
|
|
|
#define show_temp(offset) \
|
|
static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
|
|
} \
|
|
static ssize_t show_temp##offset##_low(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[offset-1])); \
|
|
} \
|
|
static ssize_t show_temp##offset##_high(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[offset-1])); \
|
|
}\
|
|
static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
|
|
show_temp##offset##_input, NULL);
|
|
show_temp(1);
|
|
show_temp(2);
|
|
show_temp(3);
|
|
|
|
static void set_temp_low(struct device *dev, const char *buf, int nr)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
down(&data->update_lock);
|
|
data->temp_low[nr] = TEMP_TO_REG(val);
|
|
lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]);
|
|
up(&data->update_lock);
|
|
}
|
|
|
|
static void set_temp_high(struct device *dev, const char *buf, int nr)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
down(&data->update_lock);
|
|
data->temp_high[nr] = TEMP_TO_REG(val);
|
|
lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]);
|
|
up(&data->update_lock);
|
|
}
|
|
|
|
#define set_temp(offset) \
|
|
static ssize_t set_temp##offset##_low(struct device *dev, struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
set_temp_low(dev, buf, offset-1); \
|
|
return count; \
|
|
} \
|
|
static ssize_t set_temp##offset##_high(struct device *dev, struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
set_temp_high(dev, buf, offset-1); \
|
|
return count; \
|
|
} \
|
|
static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
|
|
show_temp##offset##_high, set_temp##offset##_high); \
|
|
static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
|
|
show_temp##offset##_low, set_temp##offset##_low);
|
|
set_temp(1);
|
|
set_temp(2);
|
|
set_temp(3);
|
|
|
|
static ssize_t show_temp_crit_int(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lm87_data *data = lm87_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_int));
|
|
}
|
|
|
|
static ssize_t show_temp_crit_ext(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lm87_data *data = lm87_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_ext));
|
|
}
|
|
|
|
static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit_int, NULL);
|
|
static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit_ext, NULL);
|
|
static DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit_ext, NULL);
|
|
|
|
#define show_fan(offset) \
|
|
static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[offset-1], \
|
|
FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \
|
|
} \
|
|
static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[offset-1], \
|
|
FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \
|
|
} \
|
|
static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct lm87_data *data = lm87_update_device(dev); \
|
|
return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[offset-1])); \
|
|
} \
|
|
static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
|
|
show_fan##offset##_input, NULL);
|
|
show_fan(1);
|
|
show_fan(2);
|
|
|
|
static void set_fan_min(struct device *dev, const char *buf, int nr)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
down(&data->update_lock);
|
|
data->fan_min[nr] = FAN_TO_REG(val,
|
|
FAN_DIV_FROM_REG(data->fan_div[nr]));
|
|
lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]);
|
|
up(&data->update_lock);
|
|
}
|
|
|
|
/* Note: we save and restore the fan minimum here, because its value is
|
|
determined in part by the fan clock divider. This follows the principle
|
|
of least suprise; the user doesn't expect the fan minimum to change just
|
|
because the divider changed. */
|
|
static ssize_t set_fan_div(struct device *dev, const char *buf,
|
|
size_t count, int nr)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
unsigned long min;
|
|
u8 reg;
|
|
|
|
down(&data->update_lock);
|
|
min = FAN_FROM_REG(data->fan_min[nr],
|
|
FAN_DIV_FROM_REG(data->fan_div[nr]));
|
|
|
|
switch (val) {
|
|
case 1: data->fan_div[nr] = 0; break;
|
|
case 2: data->fan_div[nr] = 1; break;
|
|
case 4: data->fan_div[nr] = 2; break;
|
|
case 8: data->fan_div[nr] = 3; break;
|
|
default:
|
|
up(&data->update_lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
|
|
switch (nr) {
|
|
case 0:
|
|
reg = (reg & 0xCF) | (data->fan_div[0] << 4);
|
|
break;
|
|
case 1:
|
|
reg = (reg & 0x3F) | (data->fan_div[1] << 6);
|
|
break;
|
|
}
|
|
lm87_write_value(client, LM87_REG_VID_FAN_DIV, reg);
|
|
|
|
data->fan_min[nr] = FAN_TO_REG(min, val);
|
|
lm87_write_value(client, LM87_REG_FAN_MIN(nr),
|
|
data->fan_min[nr]);
|
|
up(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
#define set_fan(offset) \
|
|
static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
set_fan_min(dev, buf, offset-1); \
|
|
return count; \
|
|
} \
|
|
static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
return set_fan_div(dev, buf, count, offset-1); \
|
|
} \
|
|
static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
|
|
show_fan##offset##_min, set_fan##offset##_min); \
|
|
static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
|
|
show_fan##offset##_div, set_fan##offset##_div);
|
|
set_fan(1);
|
|
set_fan(2);
|
|
|
|
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lm87_data *data = lm87_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->alarms);
|
|
}
|
|
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
|
|
|
|
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lm87_data *data = lm87_update_device(dev);
|
|
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
|
|
|
|
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lm87_data *data = lm87_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->vrm);
|
|
}
|
|
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
data->vrm = simple_strtoul(buf, NULL, 10);
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
|
|
|
|
static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lm87_data *data = lm87_update_device(dev);
|
|
return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
|
|
}
|
|
static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
down(&data->update_lock);
|
|
data->aout = AOUT_TO_REG(val);
|
|
lm87_write_value(client, LM87_REG_AOUT, data->aout);
|
|
up(&data->update_lock);
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
|
|
|
|
/*
|
|
* Real code
|
|
*/
|
|
|
|
static int lm87_attach_adapter(struct i2c_adapter *adapter)
|
|
{
|
|
if (!(adapter->class & I2C_CLASS_HWMON))
|
|
return 0;
|
|
return i2c_probe(adapter, &addr_data, lm87_detect);
|
|
}
|
|
|
|
/*
|
|
* The following function does more than just detection. If detection
|
|
* succeeds, it also registers the new chip.
|
|
*/
|
|
static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
|
|
{
|
|
struct i2c_client *new_client;
|
|
struct lm87_data *data;
|
|
int err = 0;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
goto exit;
|
|
|
|
if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
/* The common I2C client data is placed right before the
|
|
LM87-specific data. */
|
|
new_client = &data->client;
|
|
i2c_set_clientdata(new_client, data);
|
|
new_client->addr = address;
|
|
new_client->adapter = adapter;
|
|
new_client->driver = &lm87_driver;
|
|
new_client->flags = 0;
|
|
|
|
/* Default to an LM87 if forced */
|
|
if (kind == 0)
|
|
kind = lm87;
|
|
|
|
/* Now, we do the remaining detection. */
|
|
if (kind < 0) {
|
|
u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
|
|
|
|
if (rev < 0x01 || rev > 0x08
|
|
|| (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
|
|
|| lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) {
|
|
dev_dbg(&adapter->dev,
|
|
"LM87 detection failed at 0x%02x.\n",
|
|
address);
|
|
goto exit_free;
|
|
}
|
|
}
|
|
|
|
/* We can fill in the remaining client fields */
|
|
strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
|
|
data->valid = 0;
|
|
init_MUTEX(&data->update_lock);
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
if ((err = i2c_attach_client(new_client)))
|
|
goto exit_free;
|
|
|
|
/* Initialize the LM87 chip */
|
|
lm87_init_client(new_client);
|
|
|
|
data->in_scale[0] = 2500;
|
|
data->in_scale[1] = 2700;
|
|
data->in_scale[2] = (data->channel & CHAN_VCC_5V) ? 5000 : 3300;
|
|
data->in_scale[3] = 5000;
|
|
data->in_scale[4] = 12000;
|
|
data->in_scale[5] = 2700;
|
|
data->in_scale[6] = 1875;
|
|
data->in_scale[7] = 1875;
|
|
|
|
/* Register sysfs hooks */
|
|
data->class_dev = hwmon_device_register(&new_client->dev);
|
|
if (IS_ERR(data->class_dev)) {
|
|
err = PTR_ERR(data->class_dev);
|
|
goto exit_detach;
|
|
}
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in1_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in1_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in2_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in2_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in3_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in3_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in3_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in4_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in4_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in4_max);
|
|
|
|
if (data->channel & CHAN_NO_FAN(0)) {
|
|
device_create_file(&new_client->dev, &dev_attr_in6_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in6_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in6_max);
|
|
} else {
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_min);
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_div);
|
|
}
|
|
if (data->channel & CHAN_NO_FAN(1)) {
|
|
device_create_file(&new_client->dev, &dev_attr_in7_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in7_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in7_max);
|
|
} else {
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_min);
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_div);
|
|
}
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_max);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_min);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_crit);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_max);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_min);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_crit);
|
|
|
|
if (data->channel & CHAN_TEMP3) {
|
|
device_create_file(&new_client->dev, &dev_attr_temp3_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp3_max);
|
|
device_create_file(&new_client->dev, &dev_attr_temp3_min);
|
|
device_create_file(&new_client->dev, &dev_attr_temp3_crit);
|
|
} else {
|
|
device_create_file(&new_client->dev, &dev_attr_in0_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in0_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in0_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in5_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in5_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in5_max);
|
|
}
|
|
|
|
if (!(data->channel & CHAN_NO_VID)) {
|
|
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
|
|
device_create_file(&new_client->dev, &dev_attr_vrm);
|
|
}
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_alarms);
|
|
device_create_file(&new_client->dev, &dev_attr_aout_output);
|
|
|
|
return 0;
|
|
|
|
exit_detach:
|
|
i2c_detach_client(new_client);
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void lm87_init_client(struct i2c_client *client)
|
|
{
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
u8 config;
|
|
|
|
data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
|
|
data->vrm = vid_which_vrm();
|
|
|
|
config = lm87_read_value(client, LM87_REG_CONFIG);
|
|
if (!(config & 0x01)) {
|
|
int i;
|
|
|
|
/* Limits are left uninitialized after power-up */
|
|
for (i = 1; i < 6; i++) {
|
|
lm87_write_value(client, LM87_REG_IN_MIN(i), 0x00);
|
|
lm87_write_value(client, LM87_REG_IN_MAX(i), 0xFF);
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
lm87_write_value(client, LM87_REG_TEMP_HIGH[i], 0x7F);
|
|
lm87_write_value(client, LM87_REG_TEMP_LOW[i], 0x00);
|
|
lm87_write_value(client, LM87_REG_AIN_MIN(i), 0x00);
|
|
lm87_write_value(client, LM87_REG_AIN_MAX(i), 0xFF);
|
|
}
|
|
if (data->channel & CHAN_TEMP3) {
|
|
lm87_write_value(client, LM87_REG_TEMP_HIGH[2], 0x7F);
|
|
lm87_write_value(client, LM87_REG_TEMP_LOW[2], 0x00);
|
|
} else {
|
|
lm87_write_value(client, LM87_REG_IN_MIN(0), 0x00);
|
|
lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF);
|
|
}
|
|
}
|
|
if ((config & 0x81) != 0x01) {
|
|
/* Start monitoring */
|
|
lm87_write_value(client, LM87_REG_CONFIG,
|
|
(config & 0xF7) | 0x01);
|
|
}
|
|
}
|
|
|
|
static int lm87_detach_client(struct i2c_client *client)
|
|
{
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
int err;
|
|
|
|
hwmon_device_unregister(data->class_dev);
|
|
|
|
if ((err = i2c_detach_client(client)))
|
|
return err;
|
|
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static struct lm87_data *lm87_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct lm87_data *data = i2c_get_clientdata(client);
|
|
|
|
down(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
|
int i, j;
|
|
|
|
dev_dbg(&client->dev, "Updating data.\n");
|
|
|
|
i = (data->channel & CHAN_TEMP3) ? 1 : 0;
|
|
j = (data->channel & CHAN_TEMP3) ? 5 : 6;
|
|
for (; i < j; i++) {
|
|
data->in[i] = lm87_read_value(client,
|
|
LM87_REG_IN(i));
|
|
data->in_min[i] = lm87_read_value(client,
|
|
LM87_REG_IN_MIN(i));
|
|
data->in_max[i] = lm87_read_value(client,
|
|
LM87_REG_IN_MAX(i));
|
|
}
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
if (data->channel & CHAN_NO_FAN(i)) {
|
|
data->in[6+i] = lm87_read_value(client,
|
|
LM87_REG_AIN(i));
|
|
data->in_max[6+i] = lm87_read_value(client,
|
|
LM87_REG_AIN_MAX(i));
|
|
data->in_min[6+i] = lm87_read_value(client,
|
|
LM87_REG_AIN_MIN(i));
|
|
|
|
} else {
|
|
data->fan[i] = lm87_read_value(client,
|
|
LM87_REG_FAN(i));
|
|
data->fan_min[i] = lm87_read_value(client,
|
|
LM87_REG_FAN_MIN(i));
|
|
}
|
|
}
|
|
|
|
j = (data->channel & CHAN_TEMP3) ? 3 : 2;
|
|
for (i = 0 ; i < j; i++) {
|
|
data->temp[i] = lm87_read_value(client,
|
|
LM87_REG_TEMP[i]);
|
|
data->temp_high[i] = lm87_read_value(client,
|
|
LM87_REG_TEMP_HIGH[i]);
|
|
data->temp_low[i] = lm87_read_value(client,
|
|
LM87_REG_TEMP_LOW[i]);
|
|
}
|
|
|
|
i = lm87_read_value(client, LM87_REG_TEMP_HW_INT_LOCK);
|
|
j = lm87_read_value(client, LM87_REG_TEMP_HW_INT);
|
|
data->temp_crit_int = min(i, j);
|
|
|
|
i = lm87_read_value(client, LM87_REG_TEMP_HW_EXT_LOCK);
|
|
j = lm87_read_value(client, LM87_REG_TEMP_HW_EXT);
|
|
data->temp_crit_ext = min(i, j);
|
|
|
|
i = lm87_read_value(client, LM87_REG_VID_FAN_DIV);
|
|
data->fan_div[0] = (i >> 4) & 0x03;
|
|
data->fan_div[1] = (i >> 6) & 0x03;
|
|
data->vid = (i & 0x0F)
|
|
| (lm87_read_value(client, LM87_REG_VID4) & 0x01)
|
|
<< 4;
|
|
|
|
data->alarms = lm87_read_value(client, LM87_REG_ALARMS1)
|
|
| (lm87_read_value(client, LM87_REG_ALARMS2)
|
|
<< 8);
|
|
data->aout = lm87_read_value(client, LM87_REG_AOUT);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
up(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static int __init sensors_lm87_init(void)
|
|
{
|
|
return i2c_add_driver(&lm87_driver);
|
|
}
|
|
|
|
static void __exit sensors_lm87_exit(void)
|
|
{
|
|
i2c_del_driver(&lm87_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org> and others");
|
|
MODULE_DESCRIPTION("LM87 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_lm87_init);
|
|
module_exit(sensors_lm87_exit);
|