![R.Marek@sh.cvut.cz](/assets/img/avatar_default.png)
This patch adds information about available userspace utillities for system health monitoring drivers. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
40 lines
1.4 KiB
Plaintext
40 lines
1.4 KiB
Plaintext
Introduction
|
|
------------
|
|
|
|
Most mainboards have sensor chips to monitor system health (like temperatures,
|
|
voltages, fans speed). They are often connected through an I2C bus, but some
|
|
are also connected directly through the ISA bus.
|
|
|
|
The kernel drivers make the data from the sensor chips available in the /sys
|
|
virtual filesystem. Userspace tools are then used to display or set or the
|
|
data in a more friendly manner.
|
|
|
|
Lm-sensors
|
|
----------
|
|
|
|
Core set of utilites that will allow you to obtain health information,
|
|
setup monitoring limits etc. You can get them on their homepage
|
|
http://www.lm-sensors.nu/ or as a package from your Linux distribution.
|
|
|
|
If from website:
|
|
Get lmsensors from project web site. Please note, you need only userspace
|
|
part, so compile with "make user_install" target.
|
|
|
|
General hints to get things working:
|
|
|
|
0) get lm-sensors userspace utils
|
|
1) compile all drivers in I2C section as modules in your kernel
|
|
2) run sensors-detect script, it will tell you what modules you need to load.
|
|
3) load them and run "sensors" command, you should see some results.
|
|
4) fix sensors.conf, labels, limits, fan divisors
|
|
5) if any more problems consult FAQ, or documentation
|
|
|
|
Other utilites
|
|
--------------
|
|
|
|
If you want some graphical indicators of system health look for applications
|
|
like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
|
|
hardware-monitor
|
|
|
|
If you are server administrator you can try snmpd or mrtgutils.
|