![Rafael J. Wysocki](/assets/img/avatar_default.png)
If the target sleep state of the system is not an ACPI sleep state (S1, S2 or S3), the TCO watchdog needs to be stopped during system suspend, because it may not be possible to ping it any more after timekeeping has been suspended (suspend-to-idle does that for one example). For this reason, provide ->suspend_noirq and ->resume_noirq callbacks for the iTCO watchdog driver and use them to stop and restart the watchdog during system suspend and resume, respectively, if the system is not going to enter an ACPI sleep state (in which case the watchdog will be stopped by the platform firmware before the state is entered). Reported-and-tested-by: Borun Fu <borun.fu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
661 lines
19 KiB
C
661 lines
19 KiB
C
/*
|
|
* intel TCO Watchdog Driver
|
|
*
|
|
* (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
|
|
* provide warranty for any of this software. This material is
|
|
* provided "AS-IS" and at no charge.
|
|
*
|
|
* The TCO watchdog is implemented in the following I/O controller hubs:
|
|
* (See the intel documentation on http://developer.intel.com.)
|
|
* document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO)
|
|
* document number 290687-002, 298242-027: 82801BA (ICH2)
|
|
* document number 290733-003, 290739-013: 82801CA (ICH3-S)
|
|
* document number 290716-001, 290718-007: 82801CAM (ICH3-M)
|
|
* document number 290744-001, 290745-025: 82801DB (ICH4)
|
|
* document number 252337-001, 252663-008: 82801DBM (ICH4-M)
|
|
* document number 273599-001, 273645-002: 82801E (C-ICH)
|
|
* document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R)
|
|
* document number 300641-004, 300884-013: 6300ESB
|
|
* document number 301473-002, 301474-026: 82801F (ICH6)
|
|
* document number 313082-001, 313075-006: 631xESB, 632xESB
|
|
* document number 307013-003, 307014-024: 82801G (ICH7)
|
|
* document number 322896-001, 322897-001: NM10
|
|
* document number 313056-003, 313057-017: 82801H (ICH8)
|
|
* document number 316972-004, 316973-012: 82801I (ICH9)
|
|
* document number 319973-002, 319974-002: 82801J (ICH10)
|
|
* document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
|
|
* document number 320066-003, 320257-008: EP80597 (IICH)
|
|
* document number 324645-001, 324646-001: Cougar Point (CPT)
|
|
* document number TBD : Patsburg (PBG)
|
|
* document number TBD : DH89xxCC
|
|
* document number TBD : Panther Point
|
|
* document number TBD : Lynx Point
|
|
* document number TBD : Lynx Point-LP
|
|
*/
|
|
|
|
/*
|
|
* Includes, defines, variables, module parameters, ...
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
/* Module and version information */
|
|
#define DRV_NAME "iTCO_wdt"
|
|
#define DRV_VERSION "1.11"
|
|
|
|
/* Includes */
|
|
#include <linux/acpi.h> /* For ACPI support */
|
|
#include <linux/module.h> /* For module specific items */
|
|
#include <linux/moduleparam.h> /* For new moduleparam's */
|
|
#include <linux/types.h> /* For standard types (like size_t) */
|
|
#include <linux/errno.h> /* For the -ENODEV/... values */
|
|
#include <linux/kernel.h> /* For printk/panic/... */
|
|
#include <linux/watchdog.h> /* For the watchdog specific items */
|
|
#include <linux/init.h> /* For __init/__exit/... */
|
|
#include <linux/fs.h> /* For file operations */
|
|
#include <linux/platform_device.h> /* For platform_driver framework */
|
|
#include <linux/pci.h> /* For pci functions */
|
|
#include <linux/ioport.h> /* For io-port access */
|
|
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
|
|
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
|
|
#include <linux/io.h> /* For inb/outb/... */
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/lpc_ich.h>
|
|
|
|
#include "iTCO_vendor.h"
|
|
|
|
/* Address definitions for the TCO */
|
|
/* TCO base address */
|
|
#define TCOBASE (iTCO_wdt_private.tco_res->start)
|
|
/* SMI Control and Enable Register */
|
|
#define SMI_EN (iTCO_wdt_private.smi_res->start)
|
|
|
|
#define TCO_RLD (TCOBASE + 0x00) /* TCO Timer Reload and Curr. Value */
|
|
#define TCOv1_TMR (TCOBASE + 0x01) /* TCOv1 Timer Initial Value */
|
|
#define TCO_DAT_IN (TCOBASE + 0x02) /* TCO Data In Register */
|
|
#define TCO_DAT_OUT (TCOBASE + 0x03) /* TCO Data Out Register */
|
|
#define TCO1_STS (TCOBASE + 0x04) /* TCO1 Status Register */
|
|
#define TCO2_STS (TCOBASE + 0x06) /* TCO2 Status Register */
|
|
#define TCO1_CNT (TCOBASE + 0x08) /* TCO1 Control Register */
|
|
#define TCO2_CNT (TCOBASE + 0x0a) /* TCO2 Control Register */
|
|
#define TCOv2_TMR (TCOBASE + 0x12) /* TCOv2 Timer Initial Value */
|
|
|
|
/* internal variables */
|
|
static struct { /* this is private data for the iTCO_wdt device */
|
|
/* TCO version/generation */
|
|
unsigned int iTCO_version;
|
|
struct resource *tco_res;
|
|
struct resource *smi_res;
|
|
/*
|
|
* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2),
|
|
* or memory-mapped PMC register bit 4 (TCO version 3).
|
|
*/
|
|
struct resource *gcs_pmc_res;
|
|
unsigned long __iomem *gcs_pmc;
|
|
/* the lock for io operations */
|
|
spinlock_t io_lock;
|
|
struct platform_device *dev;
|
|
/* the PCI-device */
|
|
struct pci_dev *pdev;
|
|
/* whether or not the watchdog has been suspended */
|
|
bool suspended;
|
|
} iTCO_wdt_private;
|
|
|
|
/* module parameters */
|
|
#define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */
|
|
static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */
|
|
module_param(heartbeat, int, 0);
|
|
MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. "
|
|
"5..76 (TCO v1) or 3..614 (TCO v2), default="
|
|
__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
static int turn_SMI_watchdog_clear_off = 1;
|
|
module_param(turn_SMI_watchdog_clear_off, int, 0);
|
|
MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
|
|
"Turn off SMI clearing watchdog (depends on TCO-version)(default=1)");
|
|
|
|
/*
|
|
* Some TCO specific functions
|
|
*/
|
|
|
|
/*
|
|
* The iTCO v1 and v2's internal timer is stored as ticks which decrement
|
|
* every 0.6 seconds. v3's internal timer is stored as seconds (some
|
|
* datasheets incorrectly state 0.6 seconds).
|
|
*/
|
|
static inline unsigned int seconds_to_ticks(int secs)
|
|
{
|
|
return iTCO_wdt_private.iTCO_version == 3 ? secs : (secs * 10) / 6;
|
|
}
|
|
|
|
static inline unsigned int ticks_to_seconds(int ticks)
|
|
{
|
|
return iTCO_wdt_private.iTCO_version == 3 ? ticks : (ticks * 6) / 10;
|
|
}
|
|
|
|
static void iTCO_wdt_set_NO_REBOOT_bit(void)
|
|
{
|
|
u32 val32;
|
|
|
|
/* Set the NO_REBOOT bit: this disables reboots */
|
|
if (iTCO_wdt_private.iTCO_version == 3) {
|
|
val32 = readl(iTCO_wdt_private.gcs_pmc);
|
|
val32 |= 0x00000010;
|
|
writel(val32, iTCO_wdt_private.gcs_pmc);
|
|
} else if (iTCO_wdt_private.iTCO_version == 2) {
|
|
val32 = readl(iTCO_wdt_private.gcs_pmc);
|
|
val32 |= 0x00000020;
|
|
writel(val32, iTCO_wdt_private.gcs_pmc);
|
|
} else if (iTCO_wdt_private.iTCO_version == 1) {
|
|
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
|
|
val32 |= 0x00000002;
|
|
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
|
|
}
|
|
}
|
|
|
|
static int iTCO_wdt_unset_NO_REBOOT_bit(void)
|
|
{
|
|
int ret = 0;
|
|
u32 val32;
|
|
|
|
/* Unset the NO_REBOOT bit: this enables reboots */
|
|
if (iTCO_wdt_private.iTCO_version == 3) {
|
|
val32 = readl(iTCO_wdt_private.gcs_pmc);
|
|
val32 &= 0xffffffef;
|
|
writel(val32, iTCO_wdt_private.gcs_pmc);
|
|
|
|
val32 = readl(iTCO_wdt_private.gcs_pmc);
|
|
if (val32 & 0x00000010)
|
|
ret = -EIO;
|
|
} else if (iTCO_wdt_private.iTCO_version == 2) {
|
|
val32 = readl(iTCO_wdt_private.gcs_pmc);
|
|
val32 &= 0xffffffdf;
|
|
writel(val32, iTCO_wdt_private.gcs_pmc);
|
|
|
|
val32 = readl(iTCO_wdt_private.gcs_pmc);
|
|
if (val32 & 0x00000020)
|
|
ret = -EIO;
|
|
} else if (iTCO_wdt_private.iTCO_version == 1) {
|
|
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
|
|
val32 &= 0xfffffffd;
|
|
pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
|
|
|
|
pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
|
|
if (val32 & 0x00000002)
|
|
ret = -EIO;
|
|
}
|
|
|
|
return ret; /* returns: 0 = OK, -EIO = Error */
|
|
}
|
|
|
|
static int iTCO_wdt_start(struct watchdog_device *wd_dev)
|
|
{
|
|
unsigned int val;
|
|
|
|
spin_lock(&iTCO_wdt_private.io_lock);
|
|
|
|
iTCO_vendor_pre_start(iTCO_wdt_private.smi_res, wd_dev->timeout);
|
|
|
|
/* disable chipset's NO_REBOOT bit */
|
|
if (iTCO_wdt_unset_NO_REBOOT_bit()) {
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Force the timer to its reload value by writing to the TCO_RLD
|
|
register */
|
|
if (iTCO_wdt_private.iTCO_version >= 2)
|
|
outw(0x01, TCO_RLD);
|
|
else if (iTCO_wdt_private.iTCO_version == 1)
|
|
outb(0x01, TCO_RLD);
|
|
|
|
/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
|
|
val = inw(TCO1_CNT);
|
|
val &= 0xf7ff;
|
|
outw(val, TCO1_CNT);
|
|
val = inw(TCO1_CNT);
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
|
|
if (val & 0x0800)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int iTCO_wdt_stop(struct watchdog_device *wd_dev)
|
|
{
|
|
unsigned int val;
|
|
|
|
spin_lock(&iTCO_wdt_private.io_lock);
|
|
|
|
iTCO_vendor_pre_stop(iTCO_wdt_private.smi_res);
|
|
|
|
/* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
|
|
val = inw(TCO1_CNT);
|
|
val |= 0x0800;
|
|
outw(val, TCO1_CNT);
|
|
val = inw(TCO1_CNT);
|
|
|
|
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
|
|
iTCO_wdt_set_NO_REBOOT_bit();
|
|
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
|
|
if ((val & 0x0800) == 0)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
|
|
{
|
|
spin_lock(&iTCO_wdt_private.io_lock);
|
|
|
|
iTCO_vendor_pre_keepalive(iTCO_wdt_private.smi_res, wd_dev->timeout);
|
|
|
|
/* Reload the timer by writing to the TCO Timer Counter register */
|
|
if (iTCO_wdt_private.iTCO_version >= 2) {
|
|
outw(0x01, TCO_RLD);
|
|
} else if (iTCO_wdt_private.iTCO_version == 1) {
|
|
/* Reset the timeout status bit so that the timer
|
|
* needs to count down twice again before rebooting */
|
|
outw(0x0008, TCO1_STS); /* write 1 to clear bit */
|
|
|
|
outb(0x01, TCO_RLD);
|
|
}
|
|
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
|
|
{
|
|
unsigned int val16;
|
|
unsigned char val8;
|
|
unsigned int tmrval;
|
|
|
|
tmrval = seconds_to_ticks(t);
|
|
|
|
/* For TCO v1 the timer counts down twice before rebooting */
|
|
if (iTCO_wdt_private.iTCO_version == 1)
|
|
tmrval /= 2;
|
|
|
|
/* from the specs: */
|
|
/* "Values of 0h-3h are ignored and should not be attempted" */
|
|
if (tmrval < 0x04)
|
|
return -EINVAL;
|
|
if (((iTCO_wdt_private.iTCO_version >= 2) && (tmrval > 0x3ff)) ||
|
|
((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f)))
|
|
return -EINVAL;
|
|
|
|
iTCO_vendor_pre_set_heartbeat(tmrval);
|
|
|
|
/* Write new heartbeat to watchdog */
|
|
if (iTCO_wdt_private.iTCO_version >= 2) {
|
|
spin_lock(&iTCO_wdt_private.io_lock);
|
|
val16 = inw(TCOv2_TMR);
|
|
val16 &= 0xfc00;
|
|
val16 |= tmrval;
|
|
outw(val16, TCOv2_TMR);
|
|
val16 = inw(TCOv2_TMR);
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
|
|
if ((val16 & 0x3ff) != tmrval)
|
|
return -EINVAL;
|
|
} else if (iTCO_wdt_private.iTCO_version == 1) {
|
|
spin_lock(&iTCO_wdt_private.io_lock);
|
|
val8 = inb(TCOv1_TMR);
|
|
val8 &= 0xc0;
|
|
val8 |= (tmrval & 0xff);
|
|
outb(val8, TCOv1_TMR);
|
|
val8 = inb(TCOv1_TMR);
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
|
|
if ((val8 & 0x3f) != tmrval)
|
|
return -EINVAL;
|
|
}
|
|
|
|
wd_dev->timeout = t;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
|
|
{
|
|
unsigned int val16;
|
|
unsigned char val8;
|
|
unsigned int time_left = 0;
|
|
|
|
/* read the TCO Timer */
|
|
if (iTCO_wdt_private.iTCO_version >= 2) {
|
|
spin_lock(&iTCO_wdt_private.io_lock);
|
|
val16 = inw(TCO_RLD);
|
|
val16 &= 0x3ff;
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
|
|
time_left = ticks_to_seconds(val16);
|
|
} else if (iTCO_wdt_private.iTCO_version == 1) {
|
|
spin_lock(&iTCO_wdt_private.io_lock);
|
|
val8 = inb(TCO_RLD);
|
|
val8 &= 0x3f;
|
|
if (!(inw(TCO1_STS) & 0x0008))
|
|
val8 += (inb(TCOv1_TMR) & 0x3f);
|
|
spin_unlock(&iTCO_wdt_private.io_lock);
|
|
|
|
time_left = ticks_to_seconds(val8);
|
|
}
|
|
return time_left;
|
|
}
|
|
|
|
/*
|
|
* Kernel Interfaces
|
|
*/
|
|
|
|
static const struct watchdog_info ident = {
|
|
.options = WDIOF_SETTIMEOUT |
|
|
WDIOF_KEEPALIVEPING |
|
|
WDIOF_MAGICCLOSE,
|
|
.firmware_version = 0,
|
|
.identity = DRV_NAME,
|
|
};
|
|
|
|
static const struct watchdog_ops iTCO_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = iTCO_wdt_start,
|
|
.stop = iTCO_wdt_stop,
|
|
.ping = iTCO_wdt_ping,
|
|
.set_timeout = iTCO_wdt_set_timeout,
|
|
.get_timeleft = iTCO_wdt_get_timeleft,
|
|
};
|
|
|
|
static struct watchdog_device iTCO_wdt_watchdog_dev = {
|
|
.info = &ident,
|
|
.ops = &iTCO_wdt_ops,
|
|
};
|
|
|
|
/*
|
|
* Init & exit routines
|
|
*/
|
|
|
|
static void iTCO_wdt_cleanup(void)
|
|
{
|
|
/* Stop the timer before we leave */
|
|
if (!nowayout)
|
|
iTCO_wdt_stop(&iTCO_wdt_watchdog_dev);
|
|
|
|
/* Deregister */
|
|
watchdog_unregister_device(&iTCO_wdt_watchdog_dev);
|
|
|
|
/* release resources */
|
|
release_region(iTCO_wdt_private.tco_res->start,
|
|
resource_size(iTCO_wdt_private.tco_res));
|
|
release_region(iTCO_wdt_private.smi_res->start,
|
|
resource_size(iTCO_wdt_private.smi_res));
|
|
if (iTCO_wdt_private.iTCO_version >= 2) {
|
|
iounmap(iTCO_wdt_private.gcs_pmc);
|
|
release_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
|
|
resource_size(iTCO_wdt_private.gcs_pmc_res));
|
|
}
|
|
|
|
iTCO_wdt_private.tco_res = NULL;
|
|
iTCO_wdt_private.smi_res = NULL;
|
|
iTCO_wdt_private.gcs_pmc_res = NULL;
|
|
iTCO_wdt_private.gcs_pmc = NULL;
|
|
}
|
|
|
|
static int iTCO_wdt_probe(struct platform_device *dev)
|
|
{
|
|
int ret = -ENODEV;
|
|
unsigned long val32;
|
|
struct lpc_ich_info *ich_info = dev_get_platdata(&dev->dev);
|
|
|
|
if (!ich_info)
|
|
goto out;
|
|
|
|
spin_lock_init(&iTCO_wdt_private.io_lock);
|
|
|
|
iTCO_wdt_private.tco_res =
|
|
platform_get_resource(dev, IORESOURCE_IO, ICH_RES_IO_TCO);
|
|
if (!iTCO_wdt_private.tco_res)
|
|
goto out;
|
|
|
|
iTCO_wdt_private.smi_res =
|
|
platform_get_resource(dev, IORESOURCE_IO, ICH_RES_IO_SMI);
|
|
if (!iTCO_wdt_private.smi_res)
|
|
goto out;
|
|
|
|
iTCO_wdt_private.iTCO_version = ich_info->iTCO_version;
|
|
iTCO_wdt_private.dev = dev;
|
|
iTCO_wdt_private.pdev = to_pci_dev(dev->dev.parent);
|
|
|
|
/*
|
|
* Get the Memory-Mapped GCS or PMC register, we need it for the
|
|
* NO_REBOOT flag (TCO v2 and v3).
|
|
*/
|
|
if (iTCO_wdt_private.iTCO_version >= 2) {
|
|
iTCO_wdt_private.gcs_pmc_res = platform_get_resource(dev,
|
|
IORESOURCE_MEM,
|
|
ICH_RES_MEM_GCS_PMC);
|
|
|
|
if (!iTCO_wdt_private.gcs_pmc_res)
|
|
goto out;
|
|
|
|
if (!request_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
|
|
resource_size(iTCO_wdt_private.gcs_pmc_res), dev->name)) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
iTCO_wdt_private.gcs_pmc = ioremap(iTCO_wdt_private.gcs_pmc_res->start,
|
|
resource_size(iTCO_wdt_private.gcs_pmc_res));
|
|
if (!iTCO_wdt_private.gcs_pmc) {
|
|
ret = -EIO;
|
|
goto unreg_gcs_pmc;
|
|
}
|
|
}
|
|
|
|
/* Check chipset's NO_REBOOT bit */
|
|
if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
|
|
pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
|
|
ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
|
|
goto unmap_gcs_pmc;
|
|
}
|
|
|
|
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
|
|
iTCO_wdt_set_NO_REBOOT_bit();
|
|
|
|
/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
|
|
if (!request_region(iTCO_wdt_private.smi_res->start,
|
|
resource_size(iTCO_wdt_private.smi_res), dev->name)) {
|
|
pr_err("I/O address 0x%04llx already in use, device disabled\n",
|
|
(u64)SMI_EN);
|
|
ret = -EBUSY;
|
|
goto unmap_gcs_pmc;
|
|
}
|
|
if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) {
|
|
/*
|
|
* Bit 13: TCO_EN -> 0
|
|
* Disables TCO logic generating an SMI#
|
|
*/
|
|
val32 = inl(SMI_EN);
|
|
val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
|
|
outl(val32, SMI_EN);
|
|
}
|
|
|
|
if (!request_region(iTCO_wdt_private.tco_res->start,
|
|
resource_size(iTCO_wdt_private.tco_res), dev->name)) {
|
|
pr_err("I/O address 0x%04llx already in use, device disabled\n",
|
|
(u64)TCOBASE);
|
|
ret = -EBUSY;
|
|
goto unreg_smi;
|
|
}
|
|
|
|
pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
|
|
ich_info->name, ich_info->iTCO_version, (u64)TCOBASE);
|
|
|
|
/* Clear out the (probably old) status */
|
|
if (iTCO_wdt_private.iTCO_version == 3) {
|
|
outl(0x20008, TCO1_STS);
|
|
} else {
|
|
outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
|
|
outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
|
|
outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */
|
|
}
|
|
|
|
iTCO_wdt_watchdog_dev.bootstatus = 0;
|
|
iTCO_wdt_watchdog_dev.timeout = WATCHDOG_TIMEOUT;
|
|
watchdog_set_nowayout(&iTCO_wdt_watchdog_dev, nowayout);
|
|
iTCO_wdt_watchdog_dev.parent = &dev->dev;
|
|
|
|
/* Make sure the watchdog is not running */
|
|
iTCO_wdt_stop(&iTCO_wdt_watchdog_dev);
|
|
|
|
/* Check that the heartbeat value is within it's range;
|
|
if not reset to the default */
|
|
if (iTCO_wdt_set_timeout(&iTCO_wdt_watchdog_dev, heartbeat)) {
|
|
iTCO_wdt_set_timeout(&iTCO_wdt_watchdog_dev, WATCHDOG_TIMEOUT);
|
|
pr_info("timeout value out of range, using %d\n",
|
|
WATCHDOG_TIMEOUT);
|
|
}
|
|
|
|
ret = watchdog_register_device(&iTCO_wdt_watchdog_dev);
|
|
if (ret != 0) {
|
|
pr_err("cannot register watchdog device (err=%d)\n", ret);
|
|
goto unreg_tco;
|
|
}
|
|
|
|
pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
|
|
heartbeat, nowayout);
|
|
|
|
return 0;
|
|
|
|
unreg_tco:
|
|
release_region(iTCO_wdt_private.tco_res->start,
|
|
resource_size(iTCO_wdt_private.tco_res));
|
|
unreg_smi:
|
|
release_region(iTCO_wdt_private.smi_res->start,
|
|
resource_size(iTCO_wdt_private.smi_res));
|
|
unmap_gcs_pmc:
|
|
if (iTCO_wdt_private.iTCO_version >= 2)
|
|
iounmap(iTCO_wdt_private.gcs_pmc);
|
|
unreg_gcs_pmc:
|
|
if (iTCO_wdt_private.iTCO_version >= 2)
|
|
release_mem_region(iTCO_wdt_private.gcs_pmc_res->start,
|
|
resource_size(iTCO_wdt_private.gcs_pmc_res));
|
|
out:
|
|
iTCO_wdt_private.tco_res = NULL;
|
|
iTCO_wdt_private.smi_res = NULL;
|
|
iTCO_wdt_private.gcs_pmc_res = NULL;
|
|
iTCO_wdt_private.gcs_pmc = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int iTCO_wdt_remove(struct platform_device *dev)
|
|
{
|
|
if (iTCO_wdt_private.tco_res || iTCO_wdt_private.smi_res)
|
|
iTCO_wdt_cleanup();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iTCO_wdt_shutdown(struct platform_device *dev)
|
|
{
|
|
iTCO_wdt_stop(NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* Suspend-to-idle requires this, because it stops the ticks and timekeeping, so
|
|
* the watchdog cannot be pinged while in that state. In ACPI sleep states the
|
|
* watchdog is stopped by the platform firmware.
|
|
*/
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static inline bool need_suspend(void)
|
|
{
|
|
return acpi_target_system_state() == ACPI_STATE_S0;
|
|
}
|
|
#else
|
|
static inline bool need_suspend(void) { return true; }
|
|
#endif
|
|
|
|
static int iTCO_wdt_suspend_noirq(struct device *dev)
|
|
{
|
|
int ret = 0;
|
|
|
|
iTCO_wdt_private.suspended = false;
|
|
if (watchdog_active(&iTCO_wdt_watchdog_dev) && need_suspend()) {
|
|
ret = iTCO_wdt_stop(&iTCO_wdt_watchdog_dev);
|
|
if (!ret)
|
|
iTCO_wdt_private.suspended = true;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int iTCO_wdt_resume_noirq(struct device *dev)
|
|
{
|
|
if (iTCO_wdt_private.suspended)
|
|
iTCO_wdt_start(&iTCO_wdt_watchdog_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dev_pm_ops iTCO_wdt_pm = {
|
|
.suspend_noirq = iTCO_wdt_suspend_noirq,
|
|
.resume_noirq = iTCO_wdt_resume_noirq,
|
|
};
|
|
|
|
#define ITCO_WDT_PM_OPS (&iTCO_wdt_pm)
|
|
#else
|
|
#define ITCO_WDT_PM_OPS NULL
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static struct platform_driver iTCO_wdt_driver = {
|
|
.probe = iTCO_wdt_probe,
|
|
.remove = iTCO_wdt_remove,
|
|
.shutdown = iTCO_wdt_shutdown,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.pm = ITCO_WDT_PM_OPS,
|
|
},
|
|
};
|
|
|
|
static int __init iTCO_wdt_init_module(void)
|
|
{
|
|
int err;
|
|
|
|
pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION);
|
|
|
|
err = platform_driver_register(&iTCO_wdt_driver);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit iTCO_wdt_cleanup_module(void)
|
|
{
|
|
platform_driver_unregister(&iTCO_wdt_driver);
|
|
pr_info("Watchdog Module Unloaded\n");
|
|
}
|
|
|
|
module_init(iTCO_wdt_init_module);
|
|
module_exit(iTCO_wdt_cleanup_module);
|
|
|
|
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
|
|
MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|