remarkable-linux/drivers/usb
Denis Turischev c09ec25d36 xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
The same issue like with Panther Point chipsets. If the USB ports are
switched to xHCI on shutdown, the xHCI host will send a spurious interrupt,
which will wake the system. Some BIOS have work around for this, but not all.
One example is Compulab's mini-desktop, the Intense-PC2.

The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.

This patch should be backported to stable kernels as old as 3.12,
that contain the commit 638298dc66
"xhci: Fix spurious wakeups after S5 on Haswell"

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-25 09:34:10 -07:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: coordinate usb phy initialization for different phy type 2014-04-24 12:45:40 -07:00
class USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driver 2014-04-16 14:03:40 -07:00
core USB: fix crash during hotplug of PCI USB controller card 2014-04-16 13:59:12 -07:00
dwc2 usb: dwc2: fix dereference before NULL check 2014-02-15 12:26:14 -08:00
dwc3 usb: dwc3: core: Fix gadget for system suspend/resume 2014-04-16 10:11:45 -05:00
early
gadget usb: gadget: f_rndis: reduce NETTX irq caused by free skb header 2014-04-21 10:19:53 -05:00
host xhci: Switch Intel Lynx Point ports to EHCI on shutdown. 2014-04-25 09:34:10 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc USB: sisusb: Use static const, fix typo 2014-03-03 08:54:30 -08:00
mon
musb usb: musb: dsps: move debugfs_remove_recursive() 2014-04-16 10:11:46 -05:00
phy usb: phy: am335x-control: wait 1ms after power-up transitions 2014-04-21 10:21:24 -05:00
renesas_usbhs
serial USB: serial: fix sysfs-attribute removal deadlock 2014-04-24 12:50:56 -07:00
storage uas: fix deadlocky memory allocations 2014-04-16 14:04:59 -07:00
wusbcore usb: wusbcore: fix panic in wusbhc_chid_set 2014-04-24 12:45:41 -07:00
Kconfig usb: host: remove USB_ARCH_HAS_?HCI 2014-02-18 12:36:38 -08:00
Makefile Move DWC2 driver out of staging 2014-01-13 14:44:01 -08:00
README
usb-common.c usb: usb-common: fix typo for usb_state_string 2014-04-16 13:56:08 -07:00
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.