![Jeff Skirvin](/assets/img/avatar_default.png)
There is an apparent HW lockup caused when the PE is disabled while there is an outstanding TC in progress. This change puts the link into OOB to force the TC to end before the PE is disabled. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
1486 lines
46 KiB
C
1486 lines
46 KiB
C
/*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "isci.h"
|
|
#include "host.h"
|
|
#include "phy.h"
|
|
#include "scu_event_codes.h"
|
|
#include "probe_roms.h"
|
|
|
|
#undef C
|
|
#define C(a) (#a)
|
|
static const char *phy_state_name(enum sci_phy_states state)
|
|
{
|
|
static const char * const strings[] = PHY_STATES;
|
|
|
|
return strings[state];
|
|
}
|
|
#undef C
|
|
|
|
/* Maximum arbitration wait time in micro-seconds */
|
|
#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700)
|
|
|
|
enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy)
|
|
{
|
|
return iphy->max_negotiated_speed;
|
|
}
|
|
|
|
static struct isci_host *phy_to_host(struct isci_phy *iphy)
|
|
{
|
|
struct isci_phy *table = iphy - iphy->phy_index;
|
|
struct isci_host *ihost = container_of(table, typeof(*ihost), phys[0]);
|
|
|
|
return ihost;
|
|
}
|
|
|
|
static struct device *sciphy_to_dev(struct isci_phy *iphy)
|
|
{
|
|
return &phy_to_host(iphy)->pdev->dev;
|
|
}
|
|
|
|
static enum sci_status
|
|
sci_phy_transport_layer_initialization(struct isci_phy *iphy,
|
|
struct scu_transport_layer_registers __iomem *reg)
|
|
{
|
|
u32 tl_control;
|
|
|
|
iphy->transport_layer_registers = reg;
|
|
|
|
writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX,
|
|
&iphy->transport_layer_registers->stp_rni);
|
|
|
|
/*
|
|
* Hardware team recommends that we enable the STP prefetch for all
|
|
* transports
|
|
*/
|
|
tl_control = readl(&iphy->transport_layer_registers->control);
|
|
tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
|
|
writel(tl_control, &iphy->transport_layer_registers->control);
|
|
|
|
return SCI_SUCCESS;
|
|
}
|
|
|
|
static enum sci_status
|
|
sci_phy_link_layer_initialization(struct isci_phy *iphy,
|
|
struct scu_link_layer_registers __iomem *llr)
|
|
{
|
|
struct isci_host *ihost = iphy->owning_port->owning_controller;
|
|
struct sci_phy_user_params *phy_user;
|
|
struct sci_phy_oem_params *phy_oem;
|
|
int phy_idx = iphy->phy_index;
|
|
struct sci_phy_cap phy_cap;
|
|
u32 phy_configuration;
|
|
u32 parity_check = 0;
|
|
u32 parity_count = 0;
|
|
u32 llctl, link_rate;
|
|
u32 clksm_value = 0;
|
|
u32 sp_timeouts = 0;
|
|
|
|
phy_user = &ihost->user_parameters.phys[phy_idx];
|
|
phy_oem = &ihost->oem_parameters.phys[phy_idx];
|
|
iphy->link_layer_registers = llr;
|
|
|
|
/* Set our IDENTIFY frame data */
|
|
#define SCI_END_DEVICE 0x01
|
|
|
|
writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
|
|
SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
|
|
SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
|
|
SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
|
|
SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
|
|
&llr->transmit_identification);
|
|
|
|
/* Write the device SAS Address */
|
|
writel(0xFEDCBA98, &llr->sas_device_name_high);
|
|
writel(phy_idx, &llr->sas_device_name_low);
|
|
|
|
/* Write the source SAS Address */
|
|
writel(phy_oem->sas_address.high, &llr->source_sas_address_high);
|
|
writel(phy_oem->sas_address.low, &llr->source_sas_address_low);
|
|
|
|
/* Clear and Set the PHY Identifier */
|
|
writel(0, &llr->identify_frame_phy_id);
|
|
writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), &llr->identify_frame_phy_id);
|
|
|
|
/* Change the initial state of the phy configuration register */
|
|
phy_configuration = readl(&llr->phy_configuration);
|
|
|
|
/* Hold OOB state machine in reset */
|
|
phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
|
|
writel(phy_configuration, &llr->phy_configuration);
|
|
|
|
/* Configure the SNW capabilities */
|
|
phy_cap.all = 0;
|
|
phy_cap.start = 1;
|
|
phy_cap.gen3_no_ssc = 1;
|
|
phy_cap.gen2_no_ssc = 1;
|
|
phy_cap.gen1_no_ssc = 1;
|
|
if (ihost->oem_parameters.controller.do_enable_ssc) {
|
|
struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe;
|
|
struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_idx];
|
|
struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
|
|
bool en_sas = false;
|
|
bool en_sata = false;
|
|
u32 sas_type = 0;
|
|
u32 sata_spread = 0x2;
|
|
u32 sas_spread = 0x2;
|
|
|
|
phy_cap.gen3_ssc = 1;
|
|
phy_cap.gen2_ssc = 1;
|
|
phy_cap.gen1_ssc = 1;
|
|
|
|
if (pci_info->orom->hdr.version < ISCI_ROM_VER_1_1)
|
|
en_sas = en_sata = true;
|
|
else {
|
|
sata_spread = ihost->oem_parameters.controller.ssc_sata_tx_spread_level;
|
|
sas_spread = ihost->oem_parameters.controller.ssc_sas_tx_spread_level;
|
|
|
|
if (sata_spread)
|
|
en_sata = true;
|
|
|
|
if (sas_spread) {
|
|
en_sas = true;
|
|
sas_type = ihost->oem_parameters.controller.ssc_sas_tx_type;
|
|
}
|
|
|
|
}
|
|
|
|
if (en_sas) {
|
|
u32 reg;
|
|
|
|
reg = readl(&xcvr->afe_xcvr_control0);
|
|
reg |= (0x00100000 | (sas_type << 19));
|
|
writel(reg, &xcvr->afe_xcvr_control0);
|
|
|
|
reg = readl(&xcvr->afe_tx_ssc_control);
|
|
reg |= sas_spread << 8;
|
|
writel(reg, &xcvr->afe_tx_ssc_control);
|
|
}
|
|
|
|
if (en_sata) {
|
|
u32 reg;
|
|
|
|
reg = readl(&xcvr->afe_tx_ssc_control);
|
|
reg |= sata_spread;
|
|
writel(reg, &xcvr->afe_tx_ssc_control);
|
|
|
|
reg = readl(&llr->stp_control);
|
|
reg |= 1 << 12;
|
|
writel(reg, &llr->stp_control);
|
|
}
|
|
}
|
|
|
|
/* The SAS specification indicates that the phy_capabilities that
|
|
* are transmitted shall have an even parity. Calculate the parity.
|
|
*/
|
|
parity_check = phy_cap.all;
|
|
while (parity_check != 0) {
|
|
if (parity_check & 0x1)
|
|
parity_count++;
|
|
parity_check >>= 1;
|
|
}
|
|
|
|
/* If parity indicates there are an odd number of bits set, then
|
|
* set the parity bit to 1 in the phy capabilities.
|
|
*/
|
|
if ((parity_count % 2) != 0)
|
|
phy_cap.parity = 1;
|
|
|
|
writel(phy_cap.all, &llr->phy_capabilities);
|
|
|
|
/* Set the enable spinup period but disable the ability to send
|
|
* notify enable spinup
|
|
*/
|
|
writel(SCU_ENSPINUP_GEN_VAL(COUNT,
|
|
phy_user->notify_enable_spin_up_insertion_frequency),
|
|
&llr->notify_enable_spinup_control);
|
|
|
|
/* Write the ALIGN Insertion Ferequency for connected phy and
|
|
* inpendent of connected state
|
|
*/
|
|
clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
|
|
phy_user->in_connection_align_insertion_frequency);
|
|
|
|
clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
|
|
phy_user->align_insertion_frequency);
|
|
|
|
writel(clksm_value, &llr->clock_skew_management);
|
|
|
|
if (is_c0(ihost->pdev) || is_c1(ihost->pdev)) {
|
|
writel(0x04210400, &llr->afe_lookup_table_control);
|
|
writel(0x020A7C05, &llr->sas_primitive_timeout);
|
|
} else
|
|
writel(0x02108421, &llr->afe_lookup_table_control);
|
|
|
|
llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
|
|
(u8)ihost->user_parameters.no_outbound_task_timeout);
|
|
|
|
switch (phy_user->max_speed_generation) {
|
|
case SCIC_SDS_PARM_GEN3_SPEED:
|
|
link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
|
|
break;
|
|
case SCIC_SDS_PARM_GEN2_SPEED:
|
|
link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
|
|
break;
|
|
default:
|
|
link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
|
|
break;
|
|
}
|
|
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
|
|
writel(llctl, &llr->link_layer_control);
|
|
|
|
sp_timeouts = readl(&llr->sas_phy_timeouts);
|
|
|
|
/* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
|
|
sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
|
|
|
|
/* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can
|
|
* lock with 3Gb drive when SCU max rate is set to 1.5Gb.
|
|
*/
|
|
sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
|
|
|
|
writel(sp_timeouts, &llr->sas_phy_timeouts);
|
|
|
|
if (is_a2(ihost->pdev)) {
|
|
/* Program the max ARB time for the PHY to 700us so we
|
|
* inter-operate with the PMC expander which shuts down
|
|
* PHYs if the expander PHY generates too many breaks.
|
|
* This time value will guarantee that the initiator PHY
|
|
* will generate the break.
|
|
*/
|
|
writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
|
|
&llr->maximum_arbitration_wait_timer_timeout);
|
|
}
|
|
|
|
/* Disable link layer hang detection, rely on the OS timeout for
|
|
* I/O timeouts.
|
|
*/
|
|
writel(0, &llr->link_layer_hang_detection_timeout);
|
|
|
|
/* We can exit the initial state to the stopped state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
|
|
|
|
return SCI_SUCCESS;
|
|
}
|
|
|
|
static void phy_sata_timeout(unsigned long data)
|
|
{
|
|
struct sci_timer *tmr = (struct sci_timer *)data;
|
|
struct isci_phy *iphy = container_of(tmr, typeof(*iphy), sata_timer);
|
|
struct isci_host *ihost = iphy->owning_port->owning_controller;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ihost->scic_lock, flags);
|
|
|
|
if (tmr->cancel)
|
|
goto done;
|
|
|
|
dev_dbg(sciphy_to_dev(iphy),
|
|
"%s: SCIC SDS Phy 0x%p did not receive signature fis before "
|
|
"timeout.\n",
|
|
__func__,
|
|
iphy);
|
|
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
done:
|
|
spin_unlock_irqrestore(&ihost->scic_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* This method returns the port currently containing this phy. If the phy is
|
|
* currently contained by the dummy port, then the phy is considered to not
|
|
* be part of a port.
|
|
* @sci_phy: This parameter specifies the phy for which to retrieve the
|
|
* containing port.
|
|
*
|
|
* This method returns a handle to a port that contains the supplied phy.
|
|
* NULL This value is returned if the phy is not part of a real
|
|
* port (i.e. it's contained in the dummy port). !NULL All other
|
|
* values indicate a handle/pointer to the port containing the phy.
|
|
*/
|
|
struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy)
|
|
{
|
|
struct isci_port *iport = iphy->owning_port;
|
|
|
|
if (iport->physical_port_index == SCIC_SDS_DUMMY_PORT)
|
|
return NULL;
|
|
|
|
return iphy->owning_port;
|
|
}
|
|
|
|
/**
|
|
* This method will assign a port to the phy object.
|
|
* @out]: iphy This parameter specifies the phy for which to assign a port
|
|
* object.
|
|
*
|
|
*
|
|
*/
|
|
void sci_phy_set_port(
|
|
struct isci_phy *iphy,
|
|
struct isci_port *iport)
|
|
{
|
|
iphy->owning_port = iport;
|
|
|
|
if (iphy->bcn_received_while_port_unassigned) {
|
|
iphy->bcn_received_while_port_unassigned = false;
|
|
sci_port_broadcast_change_received(iphy->owning_port, iphy);
|
|
}
|
|
}
|
|
|
|
enum sci_status sci_phy_initialize(struct isci_phy *iphy,
|
|
struct scu_transport_layer_registers __iomem *tl,
|
|
struct scu_link_layer_registers __iomem *ll)
|
|
{
|
|
/* Perfrom the initialization of the TL hardware */
|
|
sci_phy_transport_layer_initialization(iphy, tl);
|
|
|
|
/* Perofrm the initialization of the PE hardware */
|
|
sci_phy_link_layer_initialization(iphy, ll);
|
|
|
|
/* There is nothing that needs to be done in this state just
|
|
* transition to the stopped state
|
|
*/
|
|
sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
|
|
|
|
return SCI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* This method assigns the direct attached device ID for this phy.
|
|
*
|
|
* @iphy The phy for which the direct attached device id is to
|
|
* be assigned.
|
|
* @device_id The direct attached device ID to assign to the phy.
|
|
* This will either be the RNi for the device or an invalid RNi if there
|
|
* is no current device assigned to the phy.
|
|
*/
|
|
void sci_phy_setup_transport(struct isci_phy *iphy, u32 device_id)
|
|
{
|
|
u32 tl_control;
|
|
|
|
writel(device_id, &iphy->transport_layer_registers->stp_rni);
|
|
|
|
/*
|
|
* The read should guarantee that the first write gets posted
|
|
* before the next write
|
|
*/
|
|
tl_control = readl(&iphy->transport_layer_registers->control);
|
|
tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
|
|
writel(tl_control, &iphy->transport_layer_registers->control);
|
|
}
|
|
|
|
static void sci_phy_suspend(struct isci_phy *iphy)
|
|
{
|
|
u32 scu_sas_pcfg_value;
|
|
|
|
scu_sas_pcfg_value =
|
|
readl(&iphy->link_layer_registers->phy_configuration);
|
|
scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
|
|
writel(scu_sas_pcfg_value,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
|
|
sci_phy_setup_transport(iphy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
|
|
}
|
|
|
|
void sci_phy_resume(struct isci_phy *iphy)
|
|
{
|
|
u32 scu_sas_pcfg_value;
|
|
|
|
scu_sas_pcfg_value =
|
|
readl(&iphy->link_layer_registers->phy_configuration);
|
|
scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
|
|
writel(scu_sas_pcfg_value,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
}
|
|
|
|
void sci_phy_get_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas)
|
|
{
|
|
sas->high = readl(&iphy->link_layer_registers->source_sas_address_high);
|
|
sas->low = readl(&iphy->link_layer_registers->source_sas_address_low);
|
|
}
|
|
|
|
void sci_phy_get_attached_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas)
|
|
{
|
|
struct sas_identify_frame *iaf;
|
|
|
|
iaf = &iphy->frame_rcvd.iaf;
|
|
memcpy(sas, iaf->sas_addr, SAS_ADDR_SIZE);
|
|
}
|
|
|
|
void sci_phy_get_protocols(struct isci_phy *iphy, struct sci_phy_proto *proto)
|
|
{
|
|
proto->all = readl(&iphy->link_layer_registers->transmit_identification);
|
|
}
|
|
|
|
enum sci_status sci_phy_start(struct isci_phy *iphy)
|
|
{
|
|
enum sci_phy_states state = iphy->sm.current_state_id;
|
|
|
|
if (state != SCI_PHY_STOPPED) {
|
|
dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
|
|
__func__, phy_state_name(state));
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
}
|
|
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
return SCI_SUCCESS;
|
|
}
|
|
|
|
enum sci_status sci_phy_stop(struct isci_phy *iphy)
|
|
{
|
|
enum sci_phy_states state = iphy->sm.current_state_id;
|
|
|
|
switch (state) {
|
|
case SCI_PHY_SUB_INITIAL:
|
|
case SCI_PHY_SUB_AWAIT_OSSP_EN:
|
|
case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
|
|
case SCI_PHY_SUB_AWAIT_SAS_POWER:
|
|
case SCI_PHY_SUB_AWAIT_SATA_POWER:
|
|
case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
|
|
case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
|
|
case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
|
|
case SCI_PHY_SUB_FINAL:
|
|
case SCI_PHY_READY:
|
|
break;
|
|
default:
|
|
dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
|
|
__func__, phy_state_name(state));
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
}
|
|
|
|
sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
|
|
return SCI_SUCCESS;
|
|
}
|
|
|
|
enum sci_status sci_phy_reset(struct isci_phy *iphy)
|
|
{
|
|
enum sci_phy_states state = iphy->sm.current_state_id;
|
|
|
|
if (state != SCI_PHY_READY) {
|
|
dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
|
|
__func__, phy_state_name(state));
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
}
|
|
|
|
sci_change_state(&iphy->sm, SCI_PHY_RESETTING);
|
|
return SCI_SUCCESS;
|
|
}
|
|
|
|
enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy)
|
|
{
|
|
enum sci_phy_states state = iphy->sm.current_state_id;
|
|
|
|
switch (state) {
|
|
case SCI_PHY_SUB_AWAIT_SAS_POWER: {
|
|
u32 enable_spinup;
|
|
|
|
enable_spinup = readl(&iphy->link_layer_registers->notify_enable_spinup_control);
|
|
enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
|
|
writel(enable_spinup, &iphy->link_layer_registers->notify_enable_spinup_control);
|
|
|
|
/* Change state to the final state this substate machine has run to completion */
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL);
|
|
|
|
return SCI_SUCCESS;
|
|
}
|
|
case SCI_PHY_SUB_AWAIT_SATA_POWER: {
|
|
u32 scu_sas_pcfg_value;
|
|
|
|
/* Release the spinup hold state and reset the OOB state machine */
|
|
scu_sas_pcfg_value =
|
|
readl(&iphy->link_layer_registers->phy_configuration);
|
|
scu_sas_pcfg_value &=
|
|
~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
|
|
scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
|
|
writel(scu_sas_pcfg_value,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
|
|
/* Now restart the OOB operation */
|
|
scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
|
|
scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
|
|
writel(scu_sas_pcfg_value,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
|
|
/* Change state to the final state this substate machine has run to completion */
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN);
|
|
|
|
return SCI_SUCCESS;
|
|
}
|
|
default:
|
|
dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
|
|
__func__, phy_state_name(state));
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
}
|
|
}
|
|
|
|
static void sci_phy_start_sas_link_training(struct isci_phy *iphy)
|
|
{
|
|
/* continue the link training for the phy as if it were a SAS PHY
|
|
* instead of a SATA PHY. This is done because the completion queue had a SAS
|
|
* PHY DETECTED event when the state machine was expecting a SATA PHY event.
|
|
*/
|
|
u32 phy_control;
|
|
|
|
phy_control = readl(&iphy->link_layer_registers->phy_configuration);
|
|
phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD);
|
|
writel(phy_control,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN);
|
|
|
|
iphy->protocol = SAS_PROTOCOL_SSP;
|
|
}
|
|
|
|
static void sci_phy_start_sata_link_training(struct isci_phy *iphy)
|
|
{
|
|
/* This method continues the link training for the phy as if it were a SATA PHY
|
|
* instead of a SAS PHY. This is done because the completion queue had a SATA
|
|
* SPINUP HOLD event when the state machine was expecting a SAS PHY event. none
|
|
*/
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER);
|
|
|
|
iphy->protocol = SAS_PROTOCOL_SATA;
|
|
}
|
|
|
|
/**
|
|
* sci_phy_complete_link_training - perform processing common to
|
|
* all protocols upon completion of link training.
|
|
* @sci_phy: This parameter specifies the phy object for which link training
|
|
* has completed.
|
|
* @max_link_rate: This parameter specifies the maximum link rate to be
|
|
* associated with this phy.
|
|
* @next_state: This parameter specifies the next state for the phy's starting
|
|
* sub-state machine.
|
|
*
|
|
*/
|
|
static void sci_phy_complete_link_training(struct isci_phy *iphy,
|
|
enum sas_linkrate max_link_rate,
|
|
u32 next_state)
|
|
{
|
|
iphy->max_negotiated_speed = max_link_rate;
|
|
|
|
sci_change_state(&iphy->sm, next_state);
|
|
}
|
|
|
|
static const char *phy_event_name(u32 event_code)
|
|
{
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_PORT_SELECTOR_DETECTED:
|
|
return "port selector";
|
|
case SCU_EVENT_SENT_PORT_SELECTION:
|
|
return "port selection";
|
|
case SCU_EVENT_HARD_RESET_TRANSMITTED:
|
|
return "tx hard reset";
|
|
case SCU_EVENT_HARD_RESET_RECEIVED:
|
|
return "rx hard reset";
|
|
case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
|
|
return "identify timeout";
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
return "link fail";
|
|
case SCU_EVENT_SATA_SPINUP_HOLD:
|
|
return "sata spinup hold";
|
|
case SCU_EVENT_SAS_15_SSC:
|
|
case SCU_EVENT_SAS_15:
|
|
return "sas 1.5";
|
|
case SCU_EVENT_SAS_30_SSC:
|
|
case SCU_EVENT_SAS_30:
|
|
return "sas 3.0";
|
|
case SCU_EVENT_SAS_60_SSC:
|
|
case SCU_EVENT_SAS_60:
|
|
return "sas 6.0";
|
|
case SCU_EVENT_SATA_15_SSC:
|
|
case SCU_EVENT_SATA_15:
|
|
return "sata 1.5";
|
|
case SCU_EVENT_SATA_30_SSC:
|
|
case SCU_EVENT_SATA_30:
|
|
return "sata 3.0";
|
|
case SCU_EVENT_SATA_60_SSC:
|
|
case SCU_EVENT_SATA_60:
|
|
return "sata 6.0";
|
|
case SCU_EVENT_SAS_PHY_DETECTED:
|
|
return "sas detect";
|
|
case SCU_EVENT_SATA_PHY_DETECTED:
|
|
return "sata detect";
|
|
default:
|
|
return "unknown";
|
|
}
|
|
}
|
|
|
|
#define phy_event_dbg(iphy, state, code) \
|
|
dev_dbg(sciphy_to_dev(iphy), "phy-%d:%d: %s event: %s (%x)\n", \
|
|
phy_to_host(iphy)->id, iphy->phy_index, \
|
|
phy_state_name(state), phy_event_name(code), code)
|
|
|
|
#define phy_event_warn(iphy, state, code) \
|
|
dev_warn(sciphy_to_dev(iphy), "phy-%d:%d: %s event: %s (%x)\n", \
|
|
phy_to_host(iphy)->id, iphy->phy_index, \
|
|
phy_state_name(state), phy_event_name(code), code)
|
|
|
|
|
|
void scu_link_layer_set_txcomsas_timeout(struct isci_phy *iphy, u32 timeout)
|
|
{
|
|
u32 val;
|
|
|
|
/* Extend timeout */
|
|
val = readl(&iphy->link_layer_registers->transmit_comsas_signal);
|
|
val &= ~SCU_SAS_LLTXCOMSAS_GEN_VAL(NEGTIME, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_MASK);
|
|
val |= SCU_SAS_LLTXCOMSAS_GEN_VAL(NEGTIME, timeout);
|
|
|
|
writel(val, &iphy->link_layer_registers->transmit_comsas_signal);
|
|
}
|
|
|
|
enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
|
|
{
|
|
enum sci_phy_states state = iphy->sm.current_state_id;
|
|
|
|
switch (state) {
|
|
case SCI_PHY_SUB_AWAIT_OSSP_EN:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_SAS_PHY_DETECTED:
|
|
sci_phy_start_sas_link_training(iphy);
|
|
iphy->is_in_link_training = true;
|
|
break;
|
|
case SCU_EVENT_SATA_SPINUP_HOLD:
|
|
sci_phy_start_sata_link_training(iphy);
|
|
iphy->is_in_link_training = true;
|
|
break;
|
|
case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
|
|
/* Extend timeout value */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_EXTENDED);
|
|
|
|
/* Start the oob/sn state machine over again */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
default:
|
|
phy_event_dbg(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_SAS_PHY_DETECTED:
|
|
/*
|
|
* Why is this being reported again by the controller?
|
|
* We would re-enter this state so just stay here */
|
|
break;
|
|
case SCU_EVENT_SAS_15:
|
|
case SCU_EVENT_SAS_15_SSC:
|
|
sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS,
|
|
SCI_PHY_SUB_AWAIT_IAF_UF);
|
|
break;
|
|
case SCU_EVENT_SAS_30:
|
|
case SCU_EVENT_SAS_30_SSC:
|
|
sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS,
|
|
SCI_PHY_SUB_AWAIT_IAF_UF);
|
|
break;
|
|
case SCU_EVENT_SAS_60:
|
|
case SCU_EVENT_SAS_60_SSC:
|
|
sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS,
|
|
SCI_PHY_SUB_AWAIT_IAF_UF);
|
|
break;
|
|
case SCU_EVENT_SATA_SPINUP_HOLD:
|
|
/*
|
|
* We were doing SAS PHY link training and received a SATA PHY event
|
|
* continue OOB/SN as if this were a SATA PHY */
|
|
sci_phy_start_sata_link_training(iphy);
|
|
break;
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
/* Change the timeout value to default */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
|
|
/* Extend the timeout value */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_EXTENDED);
|
|
|
|
/* Start the oob/sn state machine over again */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
break;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_SUB_AWAIT_IAF_UF:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_SAS_PHY_DETECTED:
|
|
/* Backup the state machine */
|
|
sci_phy_start_sas_link_training(iphy);
|
|
break;
|
|
case SCU_EVENT_SATA_SPINUP_HOLD:
|
|
/* We were doing SAS PHY link training and received a
|
|
* SATA PHY event continue OOB/SN as if this were a
|
|
* SATA PHY
|
|
*/
|
|
sci_phy_start_sata_link_training(iphy);
|
|
break;
|
|
case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
|
|
/* Extend the timeout value */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_EXTENDED);
|
|
|
|
/* Start the oob/sn state machine over again */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
case SCU_EVENT_HARD_RESET_RECEIVED:
|
|
/* Start the oob/sn state machine over again */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_SUB_AWAIT_SAS_POWER:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
/* Change the timeout value to default */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_SUB_AWAIT_SATA_POWER:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
/* Change the timeout value to default */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
case SCU_EVENT_SATA_SPINUP_HOLD:
|
|
/* These events are received every 10ms and are
|
|
* expected while in this state
|
|
*/
|
|
break;
|
|
|
|
case SCU_EVENT_SAS_PHY_DETECTED:
|
|
/* There has been a change in the phy type before OOB/SN for the
|
|
* SATA finished start down the SAS link traning path.
|
|
*/
|
|
sci_phy_start_sas_link_training(iphy);
|
|
break;
|
|
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
/* Change the timeout value to default */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
case SCU_EVENT_SATA_SPINUP_HOLD:
|
|
/* These events might be received since we dont know how many may be in
|
|
* the completion queue while waiting for power
|
|
*/
|
|
break;
|
|
case SCU_EVENT_SATA_PHY_DETECTED:
|
|
iphy->protocol = SAS_PROTOCOL_SATA;
|
|
|
|
/* We have received the SATA PHY notification change state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN);
|
|
break;
|
|
case SCU_EVENT_SAS_PHY_DETECTED:
|
|
/* There has been a change in the phy type before OOB/SN for the
|
|
* SATA finished start down the SAS link traning path.
|
|
*/
|
|
sci_phy_start_sas_link_training(iphy);
|
|
break;
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_SATA_PHY_DETECTED:
|
|
/*
|
|
* The hardware reports multiple SATA PHY detected events
|
|
* ignore the extras */
|
|
break;
|
|
case SCU_EVENT_SATA_15:
|
|
case SCU_EVENT_SATA_15_SSC:
|
|
sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS,
|
|
SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
|
|
break;
|
|
case SCU_EVENT_SATA_30:
|
|
case SCU_EVENT_SATA_30_SSC:
|
|
sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS,
|
|
SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
|
|
break;
|
|
case SCU_EVENT_SATA_60:
|
|
case SCU_EVENT_SATA_60_SSC:
|
|
sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS,
|
|
SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
|
|
break;
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
/* Change the timeout value to default */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
case SCU_EVENT_SAS_PHY_DETECTED:
|
|
/*
|
|
* There has been a change in the phy type before OOB/SN for the
|
|
* SATA finished start down the SAS link traning path. */
|
|
sci_phy_start_sas_link_training(iphy);
|
|
break;
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
}
|
|
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_SATA_PHY_DETECTED:
|
|
/* Backup the state machine */
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN);
|
|
break;
|
|
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
/* Change the timeout value to default */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_READY:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_LINK_FAILURE:
|
|
/* Set default timeout */
|
|
scu_link_layer_set_txcomsas_timeout(iphy, SCU_SAS_LINK_LAYER_TXCOMSAS_NEGTIME_DEFAULT);
|
|
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
case SCU_EVENT_BROADCAST_CHANGE:
|
|
case SCU_EVENT_BROADCAST_SES:
|
|
case SCU_EVENT_BROADCAST_RESERVED0:
|
|
case SCU_EVENT_BROADCAST_RESERVED1:
|
|
case SCU_EVENT_BROADCAST_EXPANDER:
|
|
case SCU_EVENT_BROADCAST_AEN:
|
|
/* Broadcast change received. Notify the port. */
|
|
if (phy_get_non_dummy_port(iphy) != NULL)
|
|
sci_port_broadcast_change_received(iphy->owning_port, iphy);
|
|
else
|
|
iphy->bcn_received_while_port_unassigned = true;
|
|
break;
|
|
case SCU_EVENT_BROADCAST_RESERVED3:
|
|
case SCU_EVENT_BROADCAST_RESERVED4:
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
}
|
|
return SCI_SUCCESS;
|
|
case SCI_PHY_RESETTING:
|
|
switch (scu_get_event_code(event_code)) {
|
|
case SCU_EVENT_HARD_RESET_TRANSMITTED:
|
|
/* Link failure change state back to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
break;
|
|
default:
|
|
phy_event_warn(iphy, state, event_code);
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
break;
|
|
}
|
|
return SCI_SUCCESS;
|
|
default:
|
|
dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
|
|
__func__, phy_state_name(state));
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
}
|
|
}
|
|
|
|
enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index)
|
|
{
|
|
enum sci_phy_states state = iphy->sm.current_state_id;
|
|
struct isci_host *ihost = iphy->owning_port->owning_controller;
|
|
enum sci_status result;
|
|
unsigned long flags;
|
|
|
|
switch (state) {
|
|
case SCI_PHY_SUB_AWAIT_IAF_UF: {
|
|
u32 *frame_words;
|
|
struct sas_identify_frame iaf;
|
|
|
|
result = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
|
|
frame_index,
|
|
(void **)&frame_words);
|
|
|
|
if (result != SCI_SUCCESS)
|
|
return result;
|
|
|
|
sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32));
|
|
if (iaf.frame_type == 0) {
|
|
u32 state;
|
|
|
|
spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
|
|
memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf));
|
|
spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);
|
|
if (iaf.smp_tport) {
|
|
/* We got the IAF for an expander PHY go to the final
|
|
* state since there are no power requirements for
|
|
* expander phys.
|
|
*/
|
|
state = SCI_PHY_SUB_FINAL;
|
|
} else {
|
|
/* We got the IAF we can now go to the await spinup
|
|
* semaphore state
|
|
*/
|
|
state = SCI_PHY_SUB_AWAIT_SAS_POWER;
|
|
}
|
|
sci_change_state(&iphy->sm, state);
|
|
result = SCI_SUCCESS;
|
|
} else
|
|
dev_warn(sciphy_to_dev(iphy),
|
|
"%s: PHY starting substate machine received "
|
|
"unexpected frame id %x\n",
|
|
__func__, frame_index);
|
|
|
|
sci_controller_release_frame(ihost, frame_index);
|
|
return result;
|
|
}
|
|
case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: {
|
|
struct dev_to_host_fis *frame_header;
|
|
u32 *fis_frame_data;
|
|
|
|
result = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
|
|
frame_index,
|
|
(void **)&frame_header);
|
|
|
|
if (result != SCI_SUCCESS)
|
|
return result;
|
|
|
|
if ((frame_header->fis_type == FIS_REGD2H) &&
|
|
!(frame_header->status & ATA_BUSY)) {
|
|
sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
|
|
frame_index,
|
|
(void **)&fis_frame_data);
|
|
|
|
spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
|
|
sci_controller_copy_sata_response(&iphy->frame_rcvd.fis,
|
|
frame_header,
|
|
fis_frame_data);
|
|
spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);
|
|
|
|
/* got IAF we can now go to the await spinup semaphore state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL);
|
|
|
|
result = SCI_SUCCESS;
|
|
} else
|
|
dev_warn(sciphy_to_dev(iphy),
|
|
"%s: PHY starting substate machine received "
|
|
"unexpected frame id %x\n",
|
|
__func__, frame_index);
|
|
|
|
/* Regardless of the result we are done with this frame with it */
|
|
sci_controller_release_frame(ihost, frame_index);
|
|
|
|
return result;
|
|
}
|
|
default:
|
|
dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n",
|
|
__func__, phy_state_name(state));
|
|
return SCI_FAILURE_INVALID_STATE;
|
|
}
|
|
|
|
}
|
|
|
|
static void sci_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
/* This is just an temporary state go off to the starting state */
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
struct isci_host *ihost = iphy->owning_port->owning_controller;
|
|
|
|
sci_controller_power_control_queue_insert(ihost, iphy);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
struct isci_host *ihost = iphy->owning_port->owning_controller;
|
|
|
|
sci_controller_power_control_queue_remove(ihost, iphy);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
struct isci_host *ihost = iphy->owning_port->owning_controller;
|
|
|
|
sci_controller_power_control_queue_insert(ihost, iphy);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
struct isci_host *ihost = iphy->owning_port->owning_controller;
|
|
|
|
sci_controller_power_control_queue_remove(ihost, iphy);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
sci_del_timer(&iphy->sata_timer);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
sci_del_timer(&iphy->sata_timer);
|
|
}
|
|
|
|
static void sci_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
if (sci_port_link_detected(iphy->owning_port, iphy)) {
|
|
|
|
/*
|
|
* Clear the PE suspend condition so we can actually
|
|
* receive SIG FIS
|
|
* The hardware will not respond to the XRDY until the PE
|
|
* suspend condition is cleared.
|
|
*/
|
|
sci_phy_resume(iphy);
|
|
|
|
sci_mod_timer(&iphy->sata_timer,
|
|
SCIC_SDS_SIGNATURE_FIS_TIMEOUT);
|
|
} else
|
|
iphy->is_in_link_training = false;
|
|
}
|
|
|
|
static void sci_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
sci_del_timer(&iphy->sata_timer);
|
|
}
|
|
|
|
static void sci_phy_starting_final_substate_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
/* State machine has run to completion so exit out and change
|
|
* the base state machine to the ready state
|
|
*/
|
|
sci_change_state(&iphy->sm, SCI_PHY_READY);
|
|
}
|
|
|
|
/**
|
|
*
|
|
* @sci_phy: This is the struct isci_phy object to stop.
|
|
*
|
|
* This method will stop the struct isci_phy object. This does not reset the
|
|
* protocol engine it just suspends it and places it in a state where it will
|
|
* not cause the end device to power up. none
|
|
*/
|
|
static void scu_link_layer_stop_protocol_engine(
|
|
struct isci_phy *iphy)
|
|
{
|
|
u32 scu_sas_pcfg_value;
|
|
u32 enable_spinup_value;
|
|
|
|
/* Suspend the protocol engine and place it in a sata spinup hold state */
|
|
scu_sas_pcfg_value =
|
|
readl(&iphy->link_layer_registers->phy_configuration);
|
|
scu_sas_pcfg_value |=
|
|
(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
|
|
SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) |
|
|
SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD));
|
|
writel(scu_sas_pcfg_value,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
|
|
/* Disable the notify enable spinup primitives */
|
|
enable_spinup_value = readl(&iphy->link_layer_registers->notify_enable_spinup_control);
|
|
enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE);
|
|
writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control);
|
|
}
|
|
|
|
static void scu_link_layer_start_oob(struct isci_phy *iphy)
|
|
{
|
|
struct scu_link_layer_registers __iomem *ll = iphy->link_layer_registers;
|
|
u32 val;
|
|
|
|
/** Reset OOB sequence - start */
|
|
val = readl(&ll->phy_configuration);
|
|
val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
|
|
SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
|
|
writel(val, &ll->phy_configuration);
|
|
readl(&ll->phy_configuration); /* flush */
|
|
/** Reset OOB sequence - end */
|
|
|
|
/** Start OOB sequence - start */
|
|
val = readl(&ll->phy_configuration);
|
|
val |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
|
|
writel(val, &ll->phy_configuration);
|
|
readl(&ll->phy_configuration); /* flush */
|
|
/** Start OOB sequence - end */
|
|
}
|
|
|
|
/**
|
|
*
|
|
*
|
|
* This method will transmit a hard reset request on the specified phy. The SCU
|
|
* hardware requires that we reset the OOB state machine and set the hard reset
|
|
* bit in the phy configuration register. We then must start OOB over with the
|
|
* hard reset bit set.
|
|
*/
|
|
static void scu_link_layer_tx_hard_reset(
|
|
struct isci_phy *iphy)
|
|
{
|
|
u32 phy_configuration_value;
|
|
|
|
/*
|
|
* SAS Phys must wait for the HARD_RESET_TX event notification to transition
|
|
* to the starting state. */
|
|
phy_configuration_value =
|
|
readl(&iphy->link_layer_registers->phy_configuration);
|
|
phy_configuration_value |=
|
|
(SCU_SAS_PCFG_GEN_BIT(HARD_RESET) |
|
|
SCU_SAS_PCFG_GEN_BIT(OOB_RESET));
|
|
writel(phy_configuration_value,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
|
|
/* Now take the OOB state machine out of reset */
|
|
phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
|
|
phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
|
|
writel(phy_configuration_value,
|
|
&iphy->link_layer_registers->phy_configuration);
|
|
}
|
|
|
|
static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
struct isci_port *iport = iphy->owning_port;
|
|
struct isci_host *ihost = iport->owning_controller;
|
|
|
|
/*
|
|
* @todo We need to get to the controller to place this PE in a
|
|
* reset state
|
|
*/
|
|
sci_del_timer(&iphy->sata_timer);
|
|
|
|
scu_link_layer_stop_protocol_engine(iphy);
|
|
|
|
if (iphy->sm.previous_state_id != SCI_PHY_INITIAL)
|
|
sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy);
|
|
}
|
|
|
|
static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
struct isci_port *iport = iphy->owning_port;
|
|
struct isci_host *ihost = iport->owning_controller;
|
|
|
|
scu_link_layer_stop_protocol_engine(iphy);
|
|
scu_link_layer_start_oob(iphy);
|
|
|
|
/* We don't know what kind of phy we are going to be just yet */
|
|
iphy->protocol = SAS_PROTOCOL_NONE;
|
|
iphy->bcn_received_while_port_unassigned = false;
|
|
|
|
if (iphy->sm.previous_state_id == SCI_PHY_READY)
|
|
sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy);
|
|
|
|
sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL);
|
|
}
|
|
|
|
static void sci_phy_ready_state_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
struct isci_port *iport = iphy->owning_port;
|
|
struct isci_host *ihost = iport->owning_controller;
|
|
|
|
sci_controller_link_up(ihost, phy_get_non_dummy_port(iphy), iphy);
|
|
}
|
|
|
|
static void sci_phy_ready_state_exit(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
sci_phy_suspend(iphy);
|
|
}
|
|
|
|
static void sci_phy_resetting_state_enter(struct sci_base_state_machine *sm)
|
|
{
|
|
struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
|
|
|
|
/* The phy is being reset, therefore deactivate it from the port. In
|
|
* the resetting state we don't notify the user regarding link up and
|
|
* link down notifications
|
|
*/
|
|
sci_port_deactivate_phy(iphy->owning_port, iphy, false);
|
|
|
|
if (iphy->protocol == SAS_PROTOCOL_SSP) {
|
|
scu_link_layer_tx_hard_reset(iphy);
|
|
} else {
|
|
/* The SCU does not need to have a discrete reset state so
|
|
* just go back to the starting state.
|
|
*/
|
|
sci_change_state(&iphy->sm, SCI_PHY_STARTING);
|
|
}
|
|
}
|
|
|
|
static const struct sci_base_state sci_phy_state_table[] = {
|
|
[SCI_PHY_INITIAL] = { },
|
|
[SCI_PHY_STOPPED] = {
|
|
.enter_state = sci_phy_stopped_state_enter,
|
|
},
|
|
[SCI_PHY_STARTING] = {
|
|
.enter_state = sci_phy_starting_state_enter,
|
|
},
|
|
[SCI_PHY_SUB_INITIAL] = {
|
|
.enter_state = sci_phy_starting_initial_substate_enter,
|
|
},
|
|
[SCI_PHY_SUB_AWAIT_OSSP_EN] = { },
|
|
[SCI_PHY_SUB_AWAIT_SAS_SPEED_EN] = { },
|
|
[SCI_PHY_SUB_AWAIT_IAF_UF] = { },
|
|
[SCI_PHY_SUB_AWAIT_SAS_POWER] = {
|
|
.enter_state = sci_phy_starting_await_sas_power_substate_enter,
|
|
.exit_state = sci_phy_starting_await_sas_power_substate_exit,
|
|
},
|
|
[SCI_PHY_SUB_AWAIT_SATA_POWER] = {
|
|
.enter_state = sci_phy_starting_await_sata_power_substate_enter,
|
|
.exit_state = sci_phy_starting_await_sata_power_substate_exit
|
|
},
|
|
[SCI_PHY_SUB_AWAIT_SATA_PHY_EN] = {
|
|
.enter_state = sci_phy_starting_await_sata_phy_substate_enter,
|
|
.exit_state = sci_phy_starting_await_sata_phy_substate_exit
|
|
},
|
|
[SCI_PHY_SUB_AWAIT_SATA_SPEED_EN] = {
|
|
.enter_state = sci_phy_starting_await_sata_speed_substate_enter,
|
|
.exit_state = sci_phy_starting_await_sata_speed_substate_exit
|
|
},
|
|
[SCI_PHY_SUB_AWAIT_SIG_FIS_UF] = {
|
|
.enter_state = sci_phy_starting_await_sig_fis_uf_substate_enter,
|
|
.exit_state = sci_phy_starting_await_sig_fis_uf_substate_exit
|
|
},
|
|
[SCI_PHY_SUB_FINAL] = {
|
|
.enter_state = sci_phy_starting_final_substate_enter,
|
|
},
|
|
[SCI_PHY_READY] = {
|
|
.enter_state = sci_phy_ready_state_enter,
|
|
.exit_state = sci_phy_ready_state_exit,
|
|
},
|
|
[SCI_PHY_RESETTING] = {
|
|
.enter_state = sci_phy_resetting_state_enter,
|
|
},
|
|
[SCI_PHY_FINAL] = { },
|
|
};
|
|
|
|
void sci_phy_construct(struct isci_phy *iphy,
|
|
struct isci_port *iport, u8 phy_index)
|
|
{
|
|
sci_init_sm(&iphy->sm, sci_phy_state_table, SCI_PHY_INITIAL);
|
|
|
|
/* Copy the rest of the input data to our locals */
|
|
iphy->owning_port = iport;
|
|
iphy->phy_index = phy_index;
|
|
iphy->bcn_received_while_port_unassigned = false;
|
|
iphy->protocol = SAS_PROTOCOL_NONE;
|
|
iphy->link_layer_registers = NULL;
|
|
iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
|
|
|
|
/* Create the SIGNATURE FIS Timeout timer for this phy */
|
|
sci_init_timer(&iphy->sata_timer, phy_sata_timeout);
|
|
}
|
|
|
|
void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index)
|
|
{
|
|
struct sci_oem_params *oem = &ihost->oem_parameters;
|
|
u64 sci_sas_addr;
|
|
__be64 sas_addr;
|
|
|
|
sci_sas_addr = oem->phys[index].sas_address.high;
|
|
sci_sas_addr <<= 32;
|
|
sci_sas_addr |= oem->phys[index].sas_address.low;
|
|
sas_addr = cpu_to_be64(sci_sas_addr);
|
|
memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr));
|
|
|
|
iphy->sas_phy.enabled = 0;
|
|
iphy->sas_phy.id = index;
|
|
iphy->sas_phy.sas_addr = &iphy->sas_addr[0];
|
|
iphy->sas_phy.frame_rcvd = (u8 *)&iphy->frame_rcvd;
|
|
iphy->sas_phy.ha = &ihost->sas_ha;
|
|
iphy->sas_phy.lldd_phy = iphy;
|
|
iphy->sas_phy.enabled = 1;
|
|
iphy->sas_phy.class = SAS;
|
|
iphy->sas_phy.iproto = SAS_PROTOCOL_ALL;
|
|
iphy->sas_phy.tproto = 0;
|
|
iphy->sas_phy.type = PHY_TYPE_PHYSICAL;
|
|
iphy->sas_phy.role = PHY_ROLE_INITIATOR;
|
|
iphy->sas_phy.oob_mode = OOB_NOT_CONNECTED;
|
|
iphy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN;
|
|
memset(&iphy->frame_rcvd, 0, sizeof(iphy->frame_rcvd));
|
|
}
|
|
|
|
|
|
/**
|
|
* isci_phy_control() - This function is one of the SAS Domain Template
|
|
* functions. This is a phy management function.
|
|
* @phy: This parameter specifies the sphy being controlled.
|
|
* @func: This parameter specifies the phy control function being invoked.
|
|
* @buf: This parameter is specific to the phy function being invoked.
|
|
*
|
|
* status, zero indicates success.
|
|
*/
|
|
int isci_phy_control(struct asd_sas_phy *sas_phy,
|
|
enum phy_func func,
|
|
void *buf)
|
|
{
|
|
int ret = 0;
|
|
struct isci_phy *iphy = sas_phy->lldd_phy;
|
|
struct asd_sas_port *port = sas_phy->port;
|
|
struct isci_host *ihost = sas_phy->ha->lldd_ha;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(&ihost->pdev->dev,
|
|
"%s: phy %p; func %d; buf %p; isci phy %p, port %p\n",
|
|
__func__, sas_phy, func, buf, iphy, port);
|
|
|
|
switch (func) {
|
|
case PHY_FUNC_DISABLE:
|
|
spin_lock_irqsave(&ihost->scic_lock, flags);
|
|
scu_link_layer_start_oob(iphy);
|
|
sci_phy_stop(iphy);
|
|
spin_unlock_irqrestore(&ihost->scic_lock, flags);
|
|
break;
|
|
|
|
case PHY_FUNC_LINK_RESET:
|
|
spin_lock_irqsave(&ihost->scic_lock, flags);
|
|
scu_link_layer_start_oob(iphy);
|
|
sci_phy_stop(iphy);
|
|
sci_phy_start(iphy);
|
|
spin_unlock_irqrestore(&ihost->scic_lock, flags);
|
|
break;
|
|
|
|
case PHY_FUNC_HARD_RESET:
|
|
if (!port)
|
|
return -ENODEV;
|
|
|
|
ret = isci_port_perform_hard_reset(ihost, port->lldd_port, iphy);
|
|
|
|
break;
|
|
case PHY_FUNC_GET_EVENTS: {
|
|
struct scu_link_layer_registers __iomem *r;
|
|
struct sas_phy *phy = sas_phy->phy;
|
|
|
|
r = iphy->link_layer_registers;
|
|
phy->running_disparity_error_count = readl(&r->running_disparity_error_count);
|
|
phy->loss_of_dword_sync_count = readl(&r->loss_of_sync_error_count);
|
|
phy->phy_reset_problem_count = readl(&r->phy_reset_problem_count);
|
|
phy->invalid_dword_count = readl(&r->invalid_dword_counter);
|
|
break;
|
|
}
|
|
|
|
default:
|
|
dev_dbg(&ihost->pdev->dev,
|
|
"%s: phy %p; func %d NOT IMPLEMENTED!\n",
|
|
__func__, sas_phy, func);
|
|
ret = -ENOSYS;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|