![Linus Torvalds](/assets/img/avatar_default.png)
kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: - Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. - Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaDV9TAAoJEEEQszewGV1zf0AQAIlHxM8B0mJPOFv7WdPIHs8j GSGAPv0rPobdgZI8vegosIQmAiry5jjaHP6VGOrK5n8FRxfBLd89NLT7dgK7J9Yx tYcQRQn1/MqZKaIjWWgTes3okEr9s77Of3aWkA9gyvBjTGoo2hu8BTwZOYuPrIPP aYcI7VR0VbTe7FQR1QRtKBXnBTXfznF1j5ckKNY4ahgIPcUgxyh6EA1E61rDorLK gvwwzoBqIKQAcnapgarF7YOJjoE0i7ZoSlhL0b0nvhcgolyK/zLN4xujLcTGPeTJ hQwe7LhxtvtmJmu0jRMuetDLFT52d6eq8ttyFBMULkgRzcgMv6GZZXUy4k92t7ZT F2DRbAjyAlxkhUhQ8BORzEXwfWYITt1M49jWQqugdDR2fV/MAlF8motOkVBl73iS zHIQ/ZDcAD+PlwTHiDyDOUxj7qyDs2MkTLTzfXc0koOQZOqskDHQ1dIf3UzLzZ9S /dx339/ejwP73E0lzOsanhianfonqWZ3Apn3aRG18uqCt2+eHySWpxyRANuOlBZI czERg+47wDfng24xyuH0EElgbS5G0Bt1lT5zLVLdFEvoLmcBHVKqaCkiuvYXOjVM GyMRvQPiJbhT6qiJ+aSP8t/utl1aUhXQLtrUnXxu8qv9tQ6jgmqiQd9855Uvrzb0 ZR2wyNc2jtWzwCfrkWjt =kj/b -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
1464 lines
34 KiB
Plaintext
1464 lines
34 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0
|
|
config MMU
|
|
def_bool n
|
|
|
|
config FPU
|
|
def_bool n
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
def_bool y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
def_bool n
|
|
|
|
config BLACKFIN
|
|
def_bool y
|
|
select HAVE_ARCH_KGDB
|
|
select HAVE_ARCH_TRACEHOOK
|
|
select HAVE_DYNAMIC_FTRACE
|
|
select HAVE_FTRACE_MCOUNT_RECORD
|
|
select HAVE_FUNCTION_GRAPH_TRACER
|
|
select HAVE_FUNCTION_TRACER
|
|
select HAVE_IDE
|
|
select HAVE_KERNEL_GZIP if RAMKERNEL
|
|
select HAVE_KERNEL_BZIP2 if RAMKERNEL
|
|
select HAVE_KERNEL_LZMA if RAMKERNEL
|
|
select HAVE_KERNEL_LZO if RAMKERNEL
|
|
select HAVE_OPROFILE
|
|
select HAVE_PERF_EVENTS
|
|
select ARCH_HAVE_CUSTOM_GPIO_H
|
|
select GPIOLIB
|
|
select HAVE_UID16
|
|
select HAVE_UNDERSCORE_SYMBOL_PREFIX
|
|
select VIRT_TO_BUS
|
|
select ARCH_WANT_IPC_PARSE_VERSION
|
|
select GENERIC_ATOMIC64
|
|
select GENERIC_IRQ_PROBE
|
|
select GENERIC_IRQ_SHOW
|
|
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
|
|
select GENERIC_SMP_IDLE_THREAD
|
|
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
|
|
select HAVE_MOD_ARCH_SPECIFIC
|
|
select MODULES_USE_ELF_RELA
|
|
select HAVE_DEBUG_STACKOVERFLOW
|
|
select HAVE_NMI
|
|
select ARCH_NO_COHERENT_DMA_MMAP
|
|
|
|
config GENERIC_CSUM
|
|
def_bool y
|
|
|
|
config GENERIC_BUG
|
|
def_bool y
|
|
depends on BUG
|
|
|
|
config ZONE_DMA
|
|
def_bool y
|
|
|
|
config FORCE_MAX_ZONEORDER
|
|
int
|
|
default "14"
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
def_bool y
|
|
|
|
config LOCKDEP_SUPPORT
|
|
def_bool y
|
|
|
|
config STACKTRACE_SUPPORT
|
|
def_bool y
|
|
|
|
config TRACE_IRQFLAGS_SUPPORT
|
|
def_bool y
|
|
|
|
source "init/Kconfig"
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
source "kernel/Kconfig.freezer"
|
|
|
|
menu "Blackfin Processor Options"
|
|
|
|
comment "Processor and Board Settings"
|
|
|
|
choice
|
|
prompt "CPU"
|
|
default BF533
|
|
|
|
config BF512
|
|
bool "BF512"
|
|
help
|
|
BF512 Processor Support.
|
|
|
|
config BF514
|
|
bool "BF514"
|
|
help
|
|
BF514 Processor Support.
|
|
|
|
config BF516
|
|
bool "BF516"
|
|
help
|
|
BF516 Processor Support.
|
|
|
|
config BF518
|
|
bool "BF518"
|
|
help
|
|
BF518 Processor Support.
|
|
|
|
config BF522
|
|
bool "BF522"
|
|
help
|
|
BF522 Processor Support.
|
|
|
|
config BF523
|
|
bool "BF523"
|
|
help
|
|
BF523 Processor Support.
|
|
|
|
config BF524
|
|
bool "BF524"
|
|
help
|
|
BF524 Processor Support.
|
|
|
|
config BF525
|
|
bool "BF525"
|
|
help
|
|
BF525 Processor Support.
|
|
|
|
config BF526
|
|
bool "BF526"
|
|
help
|
|
BF526 Processor Support.
|
|
|
|
config BF527
|
|
bool "BF527"
|
|
help
|
|
BF527 Processor Support.
|
|
|
|
config BF531
|
|
bool "BF531"
|
|
help
|
|
BF531 Processor Support.
|
|
|
|
config BF532
|
|
bool "BF532"
|
|
help
|
|
BF532 Processor Support.
|
|
|
|
config BF533
|
|
bool "BF533"
|
|
help
|
|
BF533 Processor Support.
|
|
|
|
config BF534
|
|
bool "BF534"
|
|
help
|
|
BF534 Processor Support.
|
|
|
|
config BF536
|
|
bool "BF536"
|
|
help
|
|
BF536 Processor Support.
|
|
|
|
config BF537
|
|
bool "BF537"
|
|
help
|
|
BF537 Processor Support.
|
|
|
|
config BF538
|
|
bool "BF538"
|
|
help
|
|
BF538 Processor Support.
|
|
|
|
config BF539
|
|
bool "BF539"
|
|
help
|
|
BF539 Processor Support.
|
|
|
|
config BF542_std
|
|
bool "BF542"
|
|
help
|
|
BF542 Processor Support.
|
|
|
|
config BF542M
|
|
bool "BF542m"
|
|
help
|
|
BF542 Processor Support.
|
|
|
|
config BF544_std
|
|
bool "BF544"
|
|
help
|
|
BF544 Processor Support.
|
|
|
|
config BF544M
|
|
bool "BF544m"
|
|
help
|
|
BF544 Processor Support.
|
|
|
|
config BF547_std
|
|
bool "BF547"
|
|
help
|
|
BF547 Processor Support.
|
|
|
|
config BF547M
|
|
bool "BF547m"
|
|
help
|
|
BF547 Processor Support.
|
|
|
|
config BF548_std
|
|
bool "BF548"
|
|
help
|
|
BF548 Processor Support.
|
|
|
|
config BF548M
|
|
bool "BF548m"
|
|
help
|
|
BF548 Processor Support.
|
|
|
|
config BF549_std
|
|
bool "BF549"
|
|
help
|
|
BF549 Processor Support.
|
|
|
|
config BF549M
|
|
bool "BF549m"
|
|
help
|
|
BF549 Processor Support.
|
|
|
|
config BF561
|
|
bool "BF561"
|
|
help
|
|
BF561 Processor Support.
|
|
|
|
config BF609
|
|
bool "BF609"
|
|
select CLKDEV_LOOKUP
|
|
help
|
|
BF609 Processor Support.
|
|
|
|
endchoice
|
|
|
|
config SMP
|
|
depends on BF561
|
|
select TICKSOURCE_CORETMR
|
|
bool "Symmetric multi-processing support"
|
|
---help---
|
|
This enables support for systems with more than one CPU,
|
|
like the dual core BF561. If you have a system with only one
|
|
CPU, say N. If you have a system with more than one CPU, say Y.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
config NR_CPUS
|
|
int
|
|
depends on SMP
|
|
default 2 if BF561
|
|
|
|
config HOTPLUG_CPU
|
|
bool "Support for hot-pluggable CPUs"
|
|
depends on SMP
|
|
default y
|
|
|
|
config BF_REV_MIN
|
|
int
|
|
default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
|
|
default 2 if (BF537 || BF536 || BF534)
|
|
default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
|
|
default 4 if (BF538 || BF539)
|
|
|
|
config BF_REV_MAX
|
|
int
|
|
default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x
|
|
default 3 if (BF537 || BF536 || BF534 || BF54xM)
|
|
default 5 if (BF561 || BF538 || BF539)
|
|
default 6 if (BF533 || BF532 || BF531)
|
|
|
|
choice
|
|
prompt "Silicon Rev"
|
|
default BF_REV_0_0 if (BF51x || BF52x || BF60x)
|
|
default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
|
|
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
|
|
|
|
config BF_REV_0_0
|
|
bool "0.0"
|
|
depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
|
|
|
|
config BF_REV_0_1
|
|
bool "0.1"
|
|
depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
|
|
|
|
config BF_REV_0_2
|
|
bool "0.2"
|
|
depends on (BF51x || BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
|
|
|
|
config BF_REV_0_3
|
|
bool "0.3"
|
|
depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
|
|
|
|
config BF_REV_0_4
|
|
bool "0.4"
|
|
depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539 || BF54x)
|
|
|
|
config BF_REV_0_5
|
|
bool "0.5"
|
|
depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
|
|
|
|
config BF_REV_0_6
|
|
bool "0.6"
|
|
depends on (BF533 || BF532 || BF531)
|
|
|
|
config BF_REV_ANY
|
|
bool "any"
|
|
|
|
config BF_REV_NONE
|
|
bool "none"
|
|
|
|
endchoice
|
|
|
|
config BF53x
|
|
bool
|
|
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
|
|
default y
|
|
|
|
config GPIO_ADI
|
|
def_bool y
|
|
depends on !PINCTRL
|
|
depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
|
|
|
|
config PINCTRL_BLACKFIN_ADI2
|
|
def_bool y
|
|
depends on (BF54x || BF60x)
|
|
select PINCTRL
|
|
select PINCTRL_ADI2
|
|
|
|
config MEM_MT48LC64M4A2FB_7E
|
|
bool
|
|
depends on (BFIN533_STAMP)
|
|
default y
|
|
|
|
config MEM_MT48LC16M16A2TG_75
|
|
bool
|
|
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
|
|
|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \
|
|
|| BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \
|
|
|| BFIN527_BLUETECHNIX_CM)
|
|
default y
|
|
|
|
config MEM_MT48LC32M8A2_75
|
|
bool
|
|
depends on (BFIN518F_EZBRD || BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
|
|
default y
|
|
|
|
config MEM_MT48LC8M32B2B5_7
|
|
bool
|
|
depends on (BFIN561_BLUETECHNIX_CM)
|
|
default y
|
|
|
|
config MEM_MT48LC32M16A2TG_75
|
|
bool
|
|
depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP || BFIN527_AD7160EVAL)
|
|
default y
|
|
|
|
config MEM_MT48H32M16LFCJ_75
|
|
bool
|
|
depends on (BFIN526_EZBRD)
|
|
default y
|
|
|
|
config MEM_MT47H64M16
|
|
bool
|
|
depends on (BFIN609_EZKIT)
|
|
default y
|
|
|
|
source "arch/blackfin/mach-bf518/Kconfig"
|
|
source "arch/blackfin/mach-bf527/Kconfig"
|
|
source "arch/blackfin/mach-bf533/Kconfig"
|
|
source "arch/blackfin/mach-bf561/Kconfig"
|
|
source "arch/blackfin/mach-bf537/Kconfig"
|
|
source "arch/blackfin/mach-bf538/Kconfig"
|
|
source "arch/blackfin/mach-bf548/Kconfig"
|
|
source "arch/blackfin/mach-bf609/Kconfig"
|
|
|
|
menu "Board customizations"
|
|
|
|
config CMDLINE_BOOL
|
|
bool "Default bootloader kernel arguments"
|
|
|
|
config CMDLINE
|
|
string "Initial kernel command string"
|
|
depends on CMDLINE_BOOL
|
|
default "console=ttyBF0,57600"
|
|
help
|
|
If you don't have a boot loader capable of passing a command line string
|
|
to the kernel, you may specify one here. As a minimum, you should specify
|
|
the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
|
|
|
|
config BOOT_LOAD
|
|
hex "Kernel load address for booting"
|
|
default "0x1000"
|
|
range 0x1000 0x20000000
|
|
help
|
|
This option allows you to set the load address of the kernel.
|
|
This can be useful if you are on a board which has a small amount
|
|
of memory or you wish to reserve some memory at the beginning of
|
|
the address space.
|
|
|
|
Note that you need to keep this value above 4k (0x1000) as this
|
|
memory region is used to capture NULL pointer references as well
|
|
as some core kernel functions.
|
|
|
|
config PHY_RAM_BASE_ADDRESS
|
|
hex "Physical RAM Base"
|
|
default 0x0
|
|
help
|
|
set BF609 FPGA physical SRAM base address
|
|
|
|
config ROM_BASE
|
|
hex "Kernel ROM Base"
|
|
depends on ROMKERNEL
|
|
default "0x20040040"
|
|
range 0x20000000 0x20400000 if !(BF54x || BF561 || BF60x)
|
|
range 0x20000000 0x30000000 if (BF54x || BF561)
|
|
range 0xB0000000 0xC0000000 if (BF60x)
|
|
help
|
|
Make sure your ROM base does not include any file-header
|
|
information that is prepended to the kernel.
|
|
|
|
For example, the bootable U-Boot format (created with
|
|
mkimage) has a 64 byte header (0x40). So while the image
|
|
you write to flash might start at say 0x20080000, you have
|
|
to add 0x40 to get the kernel's ROM base as it will come
|
|
after the header.
|
|
|
|
comment "Clock/PLL Setup"
|
|
|
|
config CLKIN_HZ
|
|
int "Frequency of the crystal on the board in Hz"
|
|
default "10000000" if BFIN532_IP0X
|
|
default "11059200" if BFIN533_STAMP
|
|
default "24576000" if PNAV10
|
|
default "25000000" # most people use this
|
|
default "27000000" if BFIN533_EZKIT
|
|
default "30000000" if BFIN561_EZKIT
|
|
default "24000000" if BFIN527_AD7160EVAL
|
|
help
|
|
The frequency of CLKIN crystal oscillator on the board in Hz.
|
|
Warning: This value should match the crystal on the board. Otherwise,
|
|
peripherals won't work properly.
|
|
|
|
config BFIN_KERNEL_CLOCK
|
|
bool "Re-program Clocks while Kernel boots?"
|
|
default n
|
|
help
|
|
This option decides if kernel clocks are re-programed from the
|
|
bootloader settings. If the clocks are not set, the SDRAM settings
|
|
are also not changed, and the Bootloader does 100% of the hardware
|
|
configuration.
|
|
|
|
config PLL_BYPASS
|
|
bool "Bypass PLL"
|
|
depends on BFIN_KERNEL_CLOCK && (!BF60x)
|
|
default n
|
|
|
|
config CLKIN_HALF
|
|
bool "Half Clock In"
|
|
depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
|
|
default n
|
|
help
|
|
If this is set the clock will be divided by 2, before it goes to the PLL.
|
|
|
|
config VCO_MULT
|
|
int "VCO Multiplier"
|
|
depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
|
|
range 1 64
|
|
default "22" if BFIN533_EZKIT
|
|
default "45" if BFIN533_STAMP
|
|
default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
|
|
default "22" if BFIN533_BLUETECHNIX_CM
|
|
default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
|
|
default "20" if (BFIN561_EZKIT || BF609)
|
|
default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
|
|
default "25" if BFIN527_AD7160EVAL
|
|
help
|
|
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
|
|
PLL Frequency = (Crystal Frequency) * (this setting)
|
|
|
|
choice
|
|
prompt "Core Clock Divider"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
default CCLK_DIV_1
|
|
help
|
|
This sets the frequency of the core. It can be 1, 2, 4 or 8
|
|
Core Frequency = (PLL frequency) / (this setting)
|
|
|
|
config CCLK_DIV_1
|
|
bool "1"
|
|
|
|
config CCLK_DIV_2
|
|
bool "2"
|
|
|
|
config CCLK_DIV_4
|
|
bool "4"
|
|
|
|
config CCLK_DIV_8
|
|
bool "8"
|
|
endchoice
|
|
|
|
config SCLK_DIV
|
|
int "System Clock Divider"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
range 1 15
|
|
default 4
|
|
help
|
|
This sets the frequency of the system clock (including SDRAM or DDR) on
|
|
!BF60x else it set the clock for system buses and provides the
|
|
source from which SCLK0 and SCLK1 are derived.
|
|
This can be between 1 and 15
|
|
System Clock = (PLL frequency) / (this setting)
|
|
|
|
config SCLK0_DIV
|
|
int "System Clock0 Divider"
|
|
depends on BFIN_KERNEL_CLOCK && BF60x
|
|
range 1 15
|
|
default 1
|
|
help
|
|
This sets the frequency of the system clock0 for PVP and all other
|
|
peripherals not clocked by SCLK1.
|
|
This can be between 1 and 15
|
|
System Clock0 = (System Clock) / (this setting)
|
|
|
|
config SCLK1_DIV
|
|
int "System Clock1 Divider"
|
|
depends on BFIN_KERNEL_CLOCK && BF60x
|
|
range 1 15
|
|
default 1
|
|
help
|
|
This sets the frequency of the system clock1 (including SPORT, SPI and ACM).
|
|
This can be between 1 and 15
|
|
System Clock1 = (System Clock) / (this setting)
|
|
|
|
config DCLK_DIV
|
|
int "DDR Clock Divider"
|
|
depends on BFIN_KERNEL_CLOCK && BF60x
|
|
range 1 15
|
|
default 2
|
|
help
|
|
This sets the frequency of the DDR memory.
|
|
This can be between 1 and 15
|
|
DDR Clock = (PLL frequency) / (this setting)
|
|
|
|
choice
|
|
prompt "DDR SDRAM Chip Type"
|
|
depends on BFIN_KERNEL_CLOCK
|
|
depends on BF54x
|
|
default MEM_MT46V32M16_5B
|
|
|
|
config MEM_MT46V32M16_6T
|
|
bool "MT46V32M16_6T"
|
|
|
|
config MEM_MT46V32M16_5B
|
|
bool "MT46V32M16_5B"
|
|
endchoice
|
|
|
|
choice
|
|
prompt "DDR/SDRAM Timing"
|
|
depends on BFIN_KERNEL_CLOCK && !BF60x
|
|
default BFIN_KERNEL_CLOCK_MEMINIT_CALC
|
|
help
|
|
This option allows you to specify Blackfin SDRAM/DDR Timing parameters
|
|
The calculated SDRAM timing parameters may not be 100%
|
|
accurate - This option is therefore marked experimental.
|
|
|
|
config BFIN_KERNEL_CLOCK_MEMINIT_CALC
|
|
bool "Calculate Timings"
|
|
|
|
config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
|
|
bool "Provide accurate Timings based on target SCLK"
|
|
help
|
|
Please consult the Blackfin Hardware Reference Manuals as well
|
|
as the memory device datasheet.
|
|
http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
|
|
endchoice
|
|
|
|
menu "Memory Init Control"
|
|
depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
|
|
|
|
config MEM_DDRCTL0
|
|
depends on BF54x
|
|
hex "DDRCTL0"
|
|
default 0x0
|
|
|
|
config MEM_DDRCTL1
|
|
depends on BF54x
|
|
hex "DDRCTL1"
|
|
default 0x0
|
|
|
|
config MEM_DDRCTL2
|
|
depends on BF54x
|
|
hex "DDRCTL2"
|
|
default 0x0
|
|
|
|
config MEM_EBIU_DDRQUE
|
|
depends on BF54x
|
|
hex "DDRQUE"
|
|
default 0x0
|
|
|
|
config MEM_SDRRC
|
|
depends on !BF54x
|
|
hex "SDRRC"
|
|
default 0x0
|
|
|
|
config MEM_SDGCTL
|
|
depends on !BF54x
|
|
hex "SDGCTL"
|
|
default 0x0
|
|
endmenu
|
|
|
|
#
|
|
# Max & Min Speeds for various Chips
|
|
#
|
|
config MAX_VCO_HZ
|
|
int
|
|
default 400000000 if BF512
|
|
default 400000000 if BF514
|
|
default 400000000 if BF516
|
|
default 400000000 if BF518
|
|
default 400000000 if BF522
|
|
default 600000000 if BF523
|
|
default 400000000 if BF524
|
|
default 600000000 if BF525
|
|
default 400000000 if BF526
|
|
default 600000000 if BF527
|
|
default 400000000 if BF531
|
|
default 400000000 if BF532
|
|
default 750000000 if BF533
|
|
default 500000000 if BF534
|
|
default 400000000 if BF536
|
|
default 600000000 if BF537
|
|
default 533333333 if BF538
|
|
default 533333333 if BF539
|
|
default 600000000 if BF542
|
|
default 533333333 if BF544
|
|
default 600000000 if BF547
|
|
default 600000000 if BF548
|
|
default 533333333 if BF549
|
|
default 600000000 if BF561
|
|
default 800000000 if BF609
|
|
|
|
config MIN_VCO_HZ
|
|
int
|
|
default 50000000
|
|
|
|
config MAX_SCLK_HZ
|
|
int
|
|
default 200000000 if BF609
|
|
default 133333333
|
|
|
|
config MIN_SCLK_HZ
|
|
int
|
|
default 27000000
|
|
|
|
comment "Kernel Timer/Scheduler"
|
|
|
|
source kernel/Kconfig.hz
|
|
|
|
config SET_GENERIC_CLOCKEVENTS
|
|
bool "Generic clock events"
|
|
default y
|
|
select GENERIC_CLOCKEVENTS
|
|
|
|
menu "Clock event device"
|
|
depends on GENERIC_CLOCKEVENTS
|
|
config TICKSOURCE_GPTMR0
|
|
bool "GPTimer0"
|
|
depends on !SMP
|
|
select BFIN_GPTIMERS
|
|
|
|
config TICKSOURCE_CORETMR
|
|
bool "Core timer"
|
|
default y
|
|
endmenu
|
|
|
|
menu "Clock source"
|
|
depends on GENERIC_CLOCKEVENTS
|
|
config CYCLES_CLOCKSOURCE
|
|
bool "CYCLES"
|
|
default y
|
|
depends on !BFIN_SCRATCH_REG_CYCLES
|
|
depends on !SMP
|
|
help
|
|
If you say Y here, you will enable support for using the 'cycles'
|
|
registers as a clock source. Doing so means you will be unable to
|
|
safely write to the 'cycles' register during runtime. You will
|
|
still be able to read it (such as for performance monitoring), but
|
|
writing the registers will most likely crash the kernel.
|
|
|
|
config GPTMR0_CLOCKSOURCE
|
|
bool "GPTimer0"
|
|
select BFIN_GPTIMERS
|
|
depends on !TICKSOURCE_GPTMR0
|
|
endmenu
|
|
|
|
comment "Misc"
|
|
|
|
choice
|
|
prompt "Blackfin Exception Scratch Register"
|
|
default BFIN_SCRATCH_REG_RETN
|
|
help
|
|
Select the resource to reserve for the Exception handler:
|
|
- RETN: Non-Maskable Interrupt (NMI)
|
|
- RETE: Exception Return (JTAG/ICE)
|
|
- CYCLES: Performance counter
|
|
|
|
If you are unsure, please select "RETN".
|
|
|
|
config BFIN_SCRATCH_REG_RETN
|
|
bool "RETN"
|
|
help
|
|
Use the RETN register in the Blackfin exception handler
|
|
as a stack scratch register. This means you cannot
|
|
safely use NMI on the Blackfin while running Linux, but
|
|
you can debug the system with a JTAG ICE and use the
|
|
CYCLES performance registers.
|
|
|
|
If you are unsure, please select "RETN".
|
|
|
|
config BFIN_SCRATCH_REG_RETE
|
|
bool "RETE"
|
|
help
|
|
Use the RETE register in the Blackfin exception handler
|
|
as a stack scratch register. This means you cannot
|
|
safely use a JTAG ICE while debugging a Blackfin board,
|
|
but you can safely use the CYCLES performance registers
|
|
and the NMI.
|
|
|
|
If you are unsure, please select "RETN".
|
|
|
|
config BFIN_SCRATCH_REG_CYCLES
|
|
bool "CYCLES"
|
|
help
|
|
Use the CYCLES register in the Blackfin exception handler
|
|
as a stack scratch register. This means you cannot
|
|
safely use the CYCLES performance registers on a Blackfin
|
|
board at anytime, but you can debug the system with a JTAG
|
|
ICE and use the NMI.
|
|
|
|
If you are unsure, please select "RETN".
|
|
|
|
endchoice
|
|
|
|
endmenu
|
|
|
|
|
|
menu "Blackfin Kernel Optimizations"
|
|
|
|
comment "Memory Optimizations"
|
|
|
|
config I_ENTRY_L1
|
|
bool "Locate interrupt entry code in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config EXCPT_IRQ_SYSC_L1
|
|
bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the entire ASM lowlevel exception and interrupt entry code
|
|
(STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
|
|
(less latency)
|
|
|
|
config DO_IRQ_L1
|
|
bool "Locate frequently called do_irq dispatcher function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the frequently called do_irq dispatcher function is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config CORE_TIMER_IRQ_L1
|
|
bool "Locate frequently called timer_interrupt() function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the frequently called timer_interrupt() function is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config IDLE_L1
|
|
bool "Locate frequently idle function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the frequently called idle function is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config SCHEDULE_L1
|
|
bool "Locate kernel schedule function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the frequently called kernel schedule is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config ARITHMETIC_OPS_L1
|
|
bool "Locate kernel owned arithmetic functions in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, arithmetic functions are linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config ACCESS_OK_L1
|
|
bool "Locate access_ok function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the access_ok function is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config MEMSET_L1
|
|
bool "Locate memset function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the memset function is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config MEMCPY_L1
|
|
bool "Locate memcpy function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the memcpy function is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config STRCMP_L1
|
|
bool "locate strcmp function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the strcmp function is linked
|
|
into L1 instruction memory (less latency).
|
|
|
|
config STRNCMP_L1
|
|
bool "locate strncmp function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the strncmp function is linked
|
|
into L1 instruction memory (less latency).
|
|
|
|
config STRCPY_L1
|
|
bool "locate strcpy function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the strcpy function is linked
|
|
into L1 instruction memory (less latency).
|
|
|
|
config STRNCPY_L1
|
|
bool "locate strncpy function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the strncpy function is linked
|
|
into L1 instruction memory (less latency).
|
|
|
|
config SYS_BFIN_SPINLOCK_L1
|
|
bool "Locate sys_bfin_spinlock function in L1 Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, sys_bfin_spinlock function is linked
|
|
into L1 instruction memory. (less latency)
|
|
|
|
config CACHELINE_ALIGNED_L1
|
|
bool "Locate cacheline_aligned data to L1 Data Memory"
|
|
default y if !BF54x
|
|
default n if BF54x
|
|
depends on !SMP && !BF531 && !CRC32
|
|
help
|
|
If enabled, cacheline_aligned data is linked
|
|
into L1 data memory. (less latency)
|
|
|
|
config SYSCALL_TAB_L1
|
|
bool "Locate Syscall Table L1 Data Memory"
|
|
default n
|
|
depends on !SMP && !BF531
|
|
help
|
|
If enabled, the Syscall LUT is linked
|
|
into L1 data memory. (less latency)
|
|
|
|
config CPLB_SWITCH_TAB_L1
|
|
bool "Locate CPLB Switch Tables L1 Data Memory"
|
|
default n
|
|
depends on !SMP && !BF531
|
|
help
|
|
If enabled, the CPLB Switch Tables are linked
|
|
into L1 data memory. (less latency)
|
|
|
|
config ICACHE_FLUSH_L1
|
|
bool "Locate icache flush funcs in L1 Inst Memory"
|
|
default y
|
|
help
|
|
If enabled, the Blackfin icache flushing functions are linked
|
|
into L1 instruction memory.
|
|
|
|
Note that this might be required to address anomalies, but
|
|
these functions are pretty small, so it shouldn't be too bad.
|
|
If you are using a processor affected by an anomaly, the build
|
|
system will double check for you and prevent it.
|
|
|
|
config DCACHE_FLUSH_L1
|
|
bool "Locate dcache flush funcs in L1 Inst Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled, the Blackfin dcache flushing functions are linked
|
|
into L1 instruction memory.
|
|
|
|
config APP_STACK_L1
|
|
bool "Support locating application stack in L1 Scratch Memory"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
If enabled the application stack can be located in L1
|
|
scratch memory (less latency).
|
|
|
|
Currently only works with FLAT binaries.
|
|
|
|
config EXCEPTION_L1_SCRATCH
|
|
bool "Locate exception stack in L1 Scratch Memory"
|
|
default n
|
|
depends on !SMP && !APP_STACK_L1
|
|
help
|
|
Whenever an exception occurs, use the L1 Scratch memory for
|
|
stack storage. You cannot place the stacks of FLAT binaries
|
|
in L1 when using this option.
|
|
|
|
If you don't use L1 Scratch, then you should say Y here.
|
|
|
|
comment "Speed Optimizations"
|
|
config BFIN_INS_LOWOVERHEAD
|
|
bool "ins[bwl] low overhead, higher interrupt latency"
|
|
default y
|
|
depends on !SMP
|
|
help
|
|
Reads on the Blackfin are speculative. In Blackfin terms, this means
|
|
they can be interrupted at any time (even after they have been issued
|
|
on to the external bus), and re-issued after the interrupt occurs.
|
|
For memory - this is not a big deal, since memory does not change if
|
|
it sees a read.
|
|
|
|
If a FIFO is sitting on the end of the read, it will see two reads,
|
|
when the core only sees one since the FIFO receives both the read
|
|
which is cancelled (and not delivered to the core) and the one which
|
|
is re-issued (which is delivered to the core).
|
|
|
|
To solve this, interrupts are turned off before reads occur to
|
|
I/O space. This option controls which the overhead/latency of
|
|
controlling interrupts during this time
|
|
"n" turns interrupts off every read
|
|
(higher overhead, but lower interrupt latency)
|
|
"y" turns interrupts off every loop
|
|
(low overhead, but longer interrupt latency)
|
|
|
|
default behavior is to leave this set to on (type "Y"). If you are experiencing
|
|
interrupt latency issues, it is safe and OK to turn this off.
|
|
|
|
endmenu
|
|
|
|
choice
|
|
prompt "Kernel executes from"
|
|
help
|
|
Choose the memory type that the kernel will be running in.
|
|
|
|
config RAMKERNEL
|
|
bool "RAM"
|
|
help
|
|
The kernel will be resident in RAM when running.
|
|
|
|
config ROMKERNEL
|
|
bool "ROM"
|
|
help
|
|
The kernel will be resident in FLASH/ROM when running.
|
|
|
|
endchoice
|
|
|
|
# Common code uses "ROMKERNEL" or "XIP_KERNEL", so define both
|
|
config XIP_KERNEL
|
|
bool
|
|
default y
|
|
depends on ROMKERNEL
|
|
|
|
source "mm/Kconfig"
|
|
|
|
config BFIN_GPTIMERS
|
|
tristate "Enable Blackfin General Purpose Timers API"
|
|
default n
|
|
help
|
|
Enable support for the General Purpose Timers API. If you
|
|
are unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called gptimers.
|
|
|
|
choice
|
|
prompt "Uncached DMA region"
|
|
default DMA_UNCACHED_1M
|
|
config DMA_UNCACHED_32M
|
|
bool "Enable 32M DMA region"
|
|
config DMA_UNCACHED_16M
|
|
bool "Enable 16M DMA region"
|
|
config DMA_UNCACHED_8M
|
|
bool "Enable 8M DMA region"
|
|
config DMA_UNCACHED_4M
|
|
bool "Enable 4M DMA region"
|
|
config DMA_UNCACHED_2M
|
|
bool "Enable 2M DMA region"
|
|
config DMA_UNCACHED_1M
|
|
bool "Enable 1M DMA region"
|
|
config DMA_UNCACHED_512K
|
|
bool "Enable 512K DMA region"
|
|
config DMA_UNCACHED_256K
|
|
bool "Enable 256K DMA region"
|
|
config DMA_UNCACHED_128K
|
|
bool "Enable 128K DMA region"
|
|
config DMA_UNCACHED_NONE
|
|
bool "Disable DMA region"
|
|
endchoice
|
|
|
|
|
|
comment "Cache Support"
|
|
|
|
config BFIN_ICACHE
|
|
bool "Enable ICACHE"
|
|
default y
|
|
config BFIN_EXTMEM_ICACHEABLE
|
|
bool "Enable ICACHE for external memory"
|
|
depends on BFIN_ICACHE
|
|
default y
|
|
config BFIN_L2_ICACHEABLE
|
|
bool "Enable ICACHE for L2 SRAM"
|
|
depends on BFIN_ICACHE
|
|
depends on (BF54x || BF561 || BF60x) && !SMP
|
|
default n
|
|
|
|
config BFIN_DCACHE
|
|
bool "Enable DCACHE"
|
|
default y
|
|
config BFIN_DCACHE_BANKA
|
|
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
|
|
depends on BFIN_DCACHE && !BF531
|
|
default n
|
|
config BFIN_EXTMEM_DCACHEABLE
|
|
bool "Enable DCACHE for external memory"
|
|
depends on BFIN_DCACHE
|
|
default y
|
|
choice
|
|
prompt "External memory DCACHE policy"
|
|
depends on BFIN_EXTMEM_DCACHEABLE
|
|
default BFIN_EXTMEM_WRITEBACK if !SMP
|
|
default BFIN_EXTMEM_WRITETHROUGH if SMP
|
|
config BFIN_EXTMEM_WRITEBACK
|
|
bool "Write back"
|
|
depends on !SMP
|
|
help
|
|
Write Back Policy:
|
|
Cached data will be written back to SDRAM only when needed.
|
|
This can give a nice increase in performance, but beware of
|
|
broken drivers that do not properly invalidate/flush their
|
|
cache.
|
|
|
|
Write Through Policy:
|
|
Cached data will always be written back to SDRAM when the
|
|
cache is updated. This is a completely safe setting, but
|
|
performance is worse than Write Back.
|
|
|
|
If you are unsure of the options and you want to be safe,
|
|
then go with Write Through.
|
|
|
|
config BFIN_EXTMEM_WRITETHROUGH
|
|
bool "Write through"
|
|
help
|
|
Write Back Policy:
|
|
Cached data will be written back to SDRAM only when needed.
|
|
This can give a nice increase in performance, but beware of
|
|
broken drivers that do not properly invalidate/flush their
|
|
cache.
|
|
|
|
Write Through Policy:
|
|
Cached data will always be written back to SDRAM when the
|
|
cache is updated. This is a completely safe setting, but
|
|
performance is worse than Write Back.
|
|
|
|
If you are unsure of the options and you want to be safe,
|
|
then go with Write Through.
|
|
|
|
endchoice
|
|
|
|
config BFIN_L2_DCACHEABLE
|
|
bool "Enable DCACHE for L2 SRAM"
|
|
depends on BFIN_DCACHE
|
|
depends on (BF54x || BF561 || BF60x) && !SMP
|
|
default n
|
|
choice
|
|
prompt "L2 SRAM DCACHE policy"
|
|
depends on BFIN_L2_DCACHEABLE
|
|
default BFIN_L2_WRITEBACK
|
|
config BFIN_L2_WRITEBACK
|
|
bool "Write back"
|
|
|
|
config BFIN_L2_WRITETHROUGH
|
|
bool "Write through"
|
|
endchoice
|
|
|
|
|
|
comment "Memory Protection Unit"
|
|
config MPU
|
|
bool "Enable the memory protection unit"
|
|
default n
|
|
help
|
|
Use the processor's MPU to protect applications from accessing
|
|
memory they do not own. This comes at a performance penalty
|
|
and is recommended only for debugging.
|
|
|
|
comment "Asynchronous Memory Configuration"
|
|
|
|
menu "EBIU_AMGCTL Global Control"
|
|
depends on !BF60x
|
|
config C_AMCKEN
|
|
bool "Enable CLKOUT"
|
|
default y
|
|
|
|
config C_CDPRIO
|
|
bool "DMA has priority over core for ext. accesses"
|
|
default n
|
|
|
|
config C_B0PEN
|
|
depends on BF561
|
|
bool "Bank 0 16 bit packing enable"
|
|
default y
|
|
|
|
config C_B1PEN
|
|
depends on BF561
|
|
bool "Bank 1 16 bit packing enable"
|
|
default y
|
|
|
|
config C_B2PEN
|
|
depends on BF561
|
|
bool "Bank 2 16 bit packing enable"
|
|
default y
|
|
|
|
config C_B3PEN
|
|
depends on BF561
|
|
bool "Bank 3 16 bit packing enable"
|
|
default n
|
|
|
|
choice
|
|
prompt "Enable Asynchronous Memory Banks"
|
|
default C_AMBEN_ALL
|
|
|
|
config C_AMBEN
|
|
bool "Disable All Banks"
|
|
|
|
config C_AMBEN_B0
|
|
bool "Enable Bank 0"
|
|
|
|
config C_AMBEN_B0_B1
|
|
bool "Enable Bank 0 & 1"
|
|
|
|
config C_AMBEN_B0_B1_B2
|
|
bool "Enable Bank 0 & 1 & 2"
|
|
|
|
config C_AMBEN_ALL
|
|
bool "Enable All Banks"
|
|
endchoice
|
|
endmenu
|
|
|
|
menu "EBIU_AMBCTL Control"
|
|
depends on !BF60x
|
|
config BANK_0
|
|
hex "Bank 0 (AMBCTL0.L)"
|
|
default 0x7BB0
|
|
help
|
|
These are the low 16 bits of the EBIU_AMBCTL0 MMR which are
|
|
used to control the Asynchronous Memory Bank 0 settings.
|
|
|
|
config BANK_1
|
|
hex "Bank 1 (AMBCTL0.H)"
|
|
default 0x7BB0
|
|
default 0x5558 if BF54x
|
|
help
|
|
These are the high 16 bits of the EBIU_AMBCTL0 MMR which are
|
|
used to control the Asynchronous Memory Bank 1 settings.
|
|
|
|
config BANK_2
|
|
hex "Bank 2 (AMBCTL1.L)"
|
|
default 0x7BB0
|
|
help
|
|
These are the low 16 bits of the EBIU_AMBCTL1 MMR which are
|
|
used to control the Asynchronous Memory Bank 2 settings.
|
|
|
|
config BANK_3
|
|
hex "Bank 3 (AMBCTL1.H)"
|
|
default 0x99B3
|
|
help
|
|
These are the high 16 bits of the EBIU_AMBCTL1 MMR which are
|
|
used to control the Asynchronous Memory Bank 3 settings.
|
|
|
|
endmenu
|
|
|
|
config EBIU_MBSCTLVAL
|
|
hex "EBIU Bank Select Control Register"
|
|
depends on BF54x
|
|
default 0
|
|
|
|
config EBIU_MODEVAL
|
|
hex "Flash Memory Mode Control Register"
|
|
depends on BF54x
|
|
default 1
|
|
|
|
config EBIU_FCTLVAL
|
|
hex "Flash Memory Bank Control Register"
|
|
depends on BF54x
|
|
default 6
|
|
endmenu
|
|
|
|
#############################################################################
|
|
menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
|
|
|
|
config PCI
|
|
bool "PCI support"
|
|
depends on BROKEN
|
|
help
|
|
Support for PCI bus.
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Executable file formats"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
endmenu
|
|
|
|
menu "Power management options"
|
|
|
|
source "kernel/power/Kconfig"
|
|
|
|
config ARCH_SUSPEND_POSSIBLE
|
|
def_bool y
|
|
|
|
choice
|
|
prompt "Standby Power Saving Mode"
|
|
depends on PM && !BF60x
|
|
default PM_BFIN_SLEEP_DEEPER
|
|
config PM_BFIN_SLEEP_DEEPER
|
|
bool "Sleep Deeper"
|
|
help
|
|
Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic
|
|
power dissipation by disabling the clock to the processor core (CCLK).
|
|
Furthermore, Standby sets the internal power supply voltage (VDDINT)
|
|
to 0.85 V to provide the greatest power savings, while preserving the
|
|
processor state.
|
|
The PLL and system clock (SCLK) continue to operate at a very low
|
|
frequency of about 3.3 MHz. To preserve data integrity in the SDRAM,
|
|
the SDRAM is put into Self Refresh Mode. Typically an external event
|
|
such as GPIO interrupt or RTC activity wakes up the processor.
|
|
Various Peripherals such as UART, SPORT, PPI may not function as
|
|
normal during Sleep Deeper, due to the reduced SCLK frequency.
|
|
When in the sleep mode, system DMA access to L1 memory is not supported.
|
|
|
|
If unsure, select "Sleep Deeper".
|
|
|
|
config PM_BFIN_SLEEP
|
|
bool "Sleep"
|
|
help
|
|
Sleep Mode (High Power Savings) - The sleep mode reduces power
|
|
dissipation by disabling the clock to the processor core (CCLK).
|
|
The PLL and system clock (SCLK), however, continue to operate in
|
|
this mode. Typically an external event or RTC activity will wake
|
|
up the processor. When in the sleep mode, system DMA access to L1
|
|
memory is not supported.
|
|
|
|
If unsure, select "Sleep Deeper".
|
|
endchoice
|
|
|
|
comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
|
|
depends on PM
|
|
|
|
config PM_BFIN_WAKE_PH6
|
|
bool "Allow Wake-Up from on-chip PHY or PH6 GP"
|
|
depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
|
|
default n
|
|
help
|
|
Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
|
|
|
|
config PM_BFIN_WAKE_GP
|
|
bool "Allow Wake-Up from GPIOs"
|
|
depends on PM && BF54x
|
|
default n
|
|
help
|
|
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
|
|
(all processors, except ADSP-BF549). This option sets
|
|
the general-purpose wake-up enable (GPWE) control bit to enable
|
|
wake-up upon detection of an active low signal on the /GPW (PH7) pin.
|
|
On ADSP-BF549 this option enables the same functionality on the
|
|
/MRXON pin also PH7.
|
|
|
|
config PM_BFIN_WAKE_PA15
|
|
bool "Allow Wake-Up from PA15"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable PA15 Wake-Up
|
|
|
|
config PM_BFIN_WAKE_PA15_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_PA15
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
config PM_BFIN_WAKE_PB15
|
|
bool "Allow Wake-Up from PB15"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable PB15 Wake-Up
|
|
|
|
config PM_BFIN_WAKE_PB15_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_PB15
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
config PM_BFIN_WAKE_PC15
|
|
bool "Allow Wake-Up from PC15"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable PC15 Wake-Up
|
|
|
|
config PM_BFIN_WAKE_PC15_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_PC15
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
config PM_BFIN_WAKE_PD06
|
|
bool "Allow Wake-Up from PD06(ETH0_PHYINT)"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable PD06(ETH0_PHYINT) Wake-up
|
|
|
|
config PM_BFIN_WAKE_PD06_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_PD06
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
config PM_BFIN_WAKE_PE12
|
|
bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up
|
|
|
|
config PM_BFIN_WAKE_PE12_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_PE12
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
config PM_BFIN_WAKE_PG04
|
|
bool "Allow Wake-Up from PG04(CAN0_RX)"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable PG04(CAN0_RX) Wake-up
|
|
|
|
config PM_BFIN_WAKE_PG04_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_PG04
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
config PM_BFIN_WAKE_PG13
|
|
bool "Allow Wake-Up from PG13"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable PG13 Wake-Up
|
|
|
|
config PM_BFIN_WAKE_PG13_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_PG13
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
config PM_BFIN_WAKE_USB
|
|
bool "Allow Wake-Up from (USB)"
|
|
depends on PM && BF60x
|
|
default n
|
|
help
|
|
Enable (USB) Wake-up
|
|
|
|
config PM_BFIN_WAKE_USB_POL
|
|
int "Wake-up priority"
|
|
depends on PM_BFIN_WAKE_USB
|
|
default 0
|
|
help
|
|
Wake-Up priority 0(low) 1(high)
|
|
|
|
endmenu
|
|
|
|
menu "CPU Frequency scaling"
|
|
|
|
source "drivers/cpufreq/Kconfig"
|
|
|
|
config BFIN_CPU_FREQ
|
|
bool
|
|
depends on CPU_FREQ
|
|
default y
|
|
|
|
config CPU_VOLTAGE
|
|
bool "CPU Voltage scaling"
|
|
depends on CPU_FREQ
|
|
default n
|
|
help
|
|
Say Y here if you want CPU voltage scaling according to the CPU frequency.
|
|
This option violates the PLL BYPASS recommendation in the Blackfin Processor
|
|
manuals. There is a theoretical risk that during VDDINT transitions
|
|
the PLL may unlock.
|
|
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "drivers/firmware/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/blackfin/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|